[Freeswitch-users] How to setup a span as PRI_NET

[lakshmanan ganapathy]

Hi all,
In my office we have a Hard PBX, with some 4 extensions.
We also have sangoma A102 card.
>From the Hard PBX, if 0 is pressed, it is setup in a way that it will go to
outside world.
I've connected that line to span2 of the card.
The span2 in the A102 card, is configured as PRI_NET.

wanrouter status shows connected for the span2.

But if I dial from the extension, I got the following in the sangoma_dchan
log.
2010-04-03 12:49:49
INCOMING [ 00 01 54 50 08 02 01 64 05 04 03 80 90 a3 6c 0c 01 81 34 34 33 39
31 31 34 36 30 30 7d 02 91 81 ]
  Call Ref:0164
  Type:Setup (0x5)
  Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64
Kbit/s(16) L1Prot:G.711 A-Law(3)
  Calling Party Number:4439114600(l:10) plan:isdn(1)
type:unknown(0)scr:user, passed(1) pres:allowed(0)
  High-Layer Compatibility:Undecodedhex [ 7d 02 91 81 ]

2010-04-03 12:49:49
OUTGOING [ 02 01 50 56 08 02 81 64 5a 08 02 82 a2 ]
  Call Ref:0164
  Type:Release Compl (0x5a)
  Cause:coding:ITU-T(0) location:Public network, local user(2) val:No
Circuit/Channel Available(34)

The call in not reaching freeswitch ( I enabled debug log. But nothing is
printing in it ).
Can someone suggest how to make this work.

Please ask me if you need more information?, since I don't know what to give
now.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100406/c51bf3cd/attachment.html