[Freeswitch-users] Sangoma A500 - dial out from specific port group?

[Michael Collins]

What is the output of "oz list" and "oz dump"? Put them in
pastebin.freeswitch.org and link here in the mailing list.
-MC

On Tue, Sep 8, 2009 at 11:31 PM, Vassil Panayotov <panayotov.vd at gmail.com>wrote:

> Sorry I hit 'send' by mistake...
>
> Hi,
>
> Is it possible to originate calls from specific A500 ports with FreeSWITCH?
> I am using a A504 (8 BRI interfaces), and I want some outbound calls to be
> made from specific BRI interfaces.
>
> I tried to modify OpenZAP config as follows:
>
> conf/openzap.conf
>
> [span wanpipe boostbri1]
> trunk_type => bri
> b-channel => 1:1-2
> b-channel => 2:1-2
> b-channel => 3:1-2
> b-channel => 4:1-2
> b-channel => 5:1-2
> b-channel => 6:1-2
>
> [span wanpipe boostbri2]
> trunk_type => bri
> b-channel => 7:1-2
> b-channel => 8:1-2
>
> conf/autoload_configs/openzap.
> conf.xml:
>
> <boost_spans>
>     <span name="boostbri1">
>       <param name="dialplan" value="XML"/>
>       <param name="context" value="isdn"/>
>       </span>
>
>     <span name="boostbri2">
>       <param name="dialplan" value="XML"/>
>       <param name="context" value="isdn"/>
>     </span>
>
>   </boost_spans>
>
> When I try to originate call I am getting errors:
>
> freeswitch at emo-voip> originate openzap/2/a/123456 music
> API CALL [originate(openzap/2/a/123456 music)] output:
> -ERR NORMAL_CIRCUIT_CONGESTION
>
> 2009-09-04 09:23:34.87253 [CRIT] ozmod_ss7_boost.c:244 SPAN is not online.
> 2009-09-04 09:23:34.87253 [ERR] mod_openzap.c:1043 No channels available
> 2009-09-04 09:23:34.87253 [ERR] switch_ivr_originate.c:1510 Cannot create
> outgoing channel of type [openzap] cause: [NORMAL_CIRCUIT_CONGESTION]
>
> Then I tried to modify the /etc/wanpipe/smg_bri.conf:
>
> ;Sangoma AFT-A500 port 11 [slot:8 bus:1 span:7]
> group=2
> country=europe
> operator=etsi
> connection_type=point_to_point
> signalling=bri_nt
> spans=7
>
> ;Sangoma AFT-A500 port 12 [slot:8 bus:1 span:8]
> group=2
> country=europe
> operator=etsi
> connection_type=point_to_point
> signalling=bri_nt
> spans=8
>
> i.e. changed 'group' to 2, but this doesn't help either.
>
> Marc Celsie from Sangoma's techdesk told me that I should ' dial X at gY with
> X being the number and Y being the group number'.
>
> How originate command should look like in this case?
> originate openzap/1/a/123456 at g2 someExt ?
>
> I tried this syntax but with no effect. Marc also told me that there is a
> bug in FS which prevents groups from working.
>
> Should I fill bug report or feature request?
>
> Best regards,
> Vassil Panayotov
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090909/44bcaf01/attachment-0002.html