[Freeswitch-users] Setting up Conference with Moderator

[Ujjval Karihaloo]

Rob:

 For some reason, I don't see the DTMF appear on the fs_CLI when using the below configuration....so it basically timesout.

UK



-----Original Message-----
From: freeswitch-users-bounces at lists.freeswitch.org [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Ujjval Karihaloo
Sent: Monday, October 26, 2009 9:21 AM
To: freeswitch-users at lists.freeswitch.org
Subject: Re: [Freeswitch-users] Setting up Conference with Moderator

Thx a lot Rob, reading the wiki your way or using IVR seems correct..
===============
The wiki also says that the wait-mod might be  "used in conjunction 
with an IVR where the moderators are authenticated with an extra pass-
code", which is what I did.  I guess that's why I didn't understand 
the point of the +pin.
======================

I will try it out.

Again thx a lot for your help. Will keep everyone posted.

________________________________________
From: freeswitch-users-bounces at lists.freeswitch.org [freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Rob Forman [rob4manhere at gmail.com]
Sent: Friday, October 23, 2009 12:22 PM
To: freeswitch-users at lists.freeswitch.org
Subject: Re: [Freeswitch-users] Setting up Conference with Moderator

I just re-tested with the pin in my dial plan:

   <action application="conference" data="conference 123456 at default
+flags{}+1234" />

And it doesn't challenge me for the pin.  I just drop right in.  I
figured this is how it was intended, since the wiki says the pin is
set initially and only challenged in later attempts [by future callers]:

"The first time a conference name (confname) is used, it will be
created on demand, and the pin will be set to what ever is specified
at that time: the pin in the data string if specified, or if not, the
"pin" setting in the conference profile, and if that is also
unspecified, then there is no pin protection. Any later attempt to
join the conference must specify the same pin number, if one existed
when it was created. "


The wiki also says that the wait-mod might be  "used in conjunction
with an IVR where the moderators are authenticated with an extra pass-
code", which is what I did.  I guess that's why I didn't understand
the point of the +pin.

I'm sure there's a scenario where its used and useful, the wiki just
doesn't explain it.

Rob

On Oct 23, 2009, at 12:43 PM, Brian West wrote:

> Well first off you're not defining a pine here...
>
> confname at profilename+flags{mute|deaf|waste|moderator}+[conference pin
> number]
>
> That might be why its not asking for a pin.
>
> /b
>
> On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
>
>>      <entry action="menu-exec-app" digits="1" param="conference
>> 123456 at default+flags{}" />
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org