[Freeswitch-users] Estimating Call Capacity

[Anthony Minessale]

i wonder if we can at least get a taco-bell steak burrito for that if we
can't win the s-prize


On Mon, Oct 26, 2009 at 5:01 PM, Eliot Gable
<egable+freeswitch at gmail.com<egable%2Bfreeswitch at gmail.com>
> wrote:

> Although, FYI, I just benchmarked mod_xml_curl on a separate web app
> server from FS with FS on a Dell R710 with their current best
> processor option (Intel Xeon X5570 @2.93GHz with 8-cores total) and 32
> GB memory. The web app server is less than half the power of the R710.
> I maxed the web app server at 300 calls per second (both setting up
> and tearing down) and the R710 running FS was 65% idle. No audio was
> being proxied through FS, though. If I were running the web app server
> on an equivalent R710, they probably would have been on-par with each
> other in performance. Extrapolating, I expect that in such a case I
> should be able to get at least 650 CPS out of FS, though for
> production I would probably limit it to 400 CPS or less so I leave
> room for miscellaneous tasks. I maxed out the R710 at over 16,000
> simultaneous calls (again, no audio proxying) but the only reason I
> couldn't do more was because I hit some sort of thread creation limit
> in Linux. There was about 17 GB of memory used for this many calls.
> This should give you some ballpark idea of what you can accomplish
> with FS.
>
> At some point, I will track down and resolve the thread creation
> issue, at which time I believe call limits will be limited either by a
> complex combination of available memory, the speed of the processor,
> the cost of thread context switching, calls per second setup rate, and
> call duration.
>
> --
> Eliot Gable
>
> > -----Original Message-----
> >
> > From: freeswitch-users-bounces at lists.freeswitch.org [mailto:
> freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Giovanni
> Maruzzelli
> >
> > Sent: Monday, October 26, 2009 4:56 PM
> >
> > To: freeswitch-users at lists.freeswitch.org
> >
> > Subject: Re: [Freeswitch-users] Estimating Call Capacity
> >
> >
> >
> > On Mon, Oct 26, 2009 at 9:28 PM, Vinuth Madinur
> >
> > <vinuth.madinur at gmail.com> wrote:
> >
> > > Here are a few benchmarks that I had stumbled upon.
> >
> > >
> http://wiki.voiceworks.pl/display/~pawel/FreeSwitch+performance+on+SUN+x2200+M2<http://wiki.voiceworks.pl/display/%7Epawel/FreeSwitch+performance+on+SUN+x2200+M2>
> >
> >
> >
> > Please remember NO benchmarks are endorsed by the FS community or
> >
> > developers, because there are just too many variables, and a simple
> >
> > figure is just useful for marketing hype, not for real dimensioning.
> >
> >
> >
> > You MUST do your own benchmarking, so you get an idea about how to
> >
> > dimension for your own use case and hardware.
> >
> >
> >
> >
> >
> > > Thanks,
> >
> > > Vinuth.
> >
> > >
> >
> > > On Tue, Oct 27, 2009 at 1:43 AM, Brian West <brian at freeswitch.org>
> wrote:
> >
> > >>
> >
> > >> I highly doubt it... You can wait for someone to post their results
> >
> > >> but in the end you'll have to do your own load testing because not
> >
> > >> everyone's numbers will jive with your use case.  Which is the reason
> >
> > >> the project never posts or endorses a set call count.
> >
> > >>
> >
> > >> /b
> >
> > >>
> >
> > >> On Oct 26, 2009, at 2:50 PM, Ujjval Karihaloo wrote:
> >
> > >>
> >
> > >> > Are there any benchmarking test results available publicly?
> >
> > >> > ________________________________________
> >
> > >>
> >
> > >>
> >
> > >> _______________________________________________
> >
> > >> FreeSWITCH-users mailing list
> >
> > >> FreeSWITCH-users at lists.freeswitch.org
> >
> > >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >
> > >> UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >
> > >> http://www.freeswitch.org
> >
> > >
> >
> > >
> >
> > > _______________________________________________
> >
> > > FreeSWITCH-users mailing list
> >
> > > FreeSWITCH-users at lists.freeswitch.org
> >
> > > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >
> > > UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >
> > > http://www.freeswitch.org
> >
> > >
> >
> > >
> >
> >
> >
> >
> >
> >
> >
> > --
> >
> > Sincerely,
> >
> >
> >
> > Giovanni Maruzzelli
> >
> > Cell : +39-347-2665618
> >
> >
> >
> > _______________________________________________
> >
> > FreeSWITCH-users mailing list
> >
> > FreeSWITCH-users at lists.freeswitch.org
> >
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> >
> > http://www.freeswitch.org
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>



-- 
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
Twitter: http://twitter.com/FreeSWITCH_wire

AIM: anthm
MSN:anthony_minessale at hotmail.com <MSN%3Aanthony_minessale at hotmail.com>
GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com<PAYPAL%3Aanthony.minessale at gmail.com>
IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference
sip:888 at conference.freeswitch.org <sip%3A888 at conference.freeswitch.org>
iax:guest at conference.freeswitch.org/888
googletalk:conf+888 at conference.freeswitch.org<googletalk%3Aconf%2B888 at conference.freeswitch.org>
pstn:213-799-1400
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20091026/5cc37fb0/attachment-0002.html