[Freeswitch-users] openzap Failure opening channel error

[lakshmanan ganapathy]

[debian :~]# ztcfg -vvv
Zaptel Version: 1.4.11
Echo Canceller: MG2
Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)

31 channels to configure.

[debian :~]# cat /proc/zaptel/1
+ cat /proc/zaptel/1
Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS ClockSource
        Timing slips: 1

        1 TE2/0/1/1 Clear
        2 TE2/0/1/2 Clear
        3 TE2/0/1/3 Clear
        4 TE2/0/1/4 Clear
        5 TE2/0/1/5 Clear
        6 TE2/0/1/6 Clear
        7 TE2/0/1/7 Clear
        8 TE2/0/1/8 Clear
        9 TE2/0/1/9 Clear
        10 TE2/0/1/10 Clear
        11 TE2/0/1/11 Clear
        12 TE2/0/1/12 Clear
        13 TE2/0/1/13 Clear
        14 TE2/0/1/14 Clear
        15 TE2/0/1/15 Clear
        16 TE2/0/1/16 HDLCFCS
        17 TE2/0/1/17 Clear
        18 TE2/0/1/18 Clear
        19 TE2/0/1/19 Clear
        20 TE2/0/1/20 Clear
        21 TE2/0/1/21 Clear
        22 TE2/0/1/22 Clear
        23 TE2/0/1/23 Clear
        24 TE2/0/1/24 Clear
        25 TE2/0/1/25 Clear
        26 TE2/0/1/26 Clear
        27 TE2/0/1/27 Clear
        28 TE2/0/1/28 Clear
        29 TE2/0/1/29 Clear
        30 TE2/0/1/30 Clear
        31 TE2/0/1/31 Clear


On Wed, Oct 7, 2009 at 5:29 PM, <Russell.Mosemann at cune.org> wrote:

> lakshmanan ganapathy <lakindia89 at gmail.com> said:
>
> > On incomming call, I just call an event outboud socket. But what
> happens is,
> > for the first 15 call, it is working fine. But from the 16th call to 30th
> > call, it says the below error.
>
> What is displayed with
>
>  ztcfg -vv
>
> What is displayed with
>
>  cat /proc/zaptel/1
>
> --
> Russell Mosemann
>
>
>
> ________________________________________________________
> Concordia University, Nebraska
> See http://www.cune.edu/ for the latest news and events!
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20091007/89ceef92/attachment-0002.html