[Freeswitch-users] Registration Error - 408 timeout and now 403

[Sam Abekah-Mensah]

Hello

I have tried the same setup but this time using a windows build FS1.0.4 
on an XP machine and all is fine. The sample 1001 and 1002 IDs work 
without any tweaking at all. Could the problem  be with the linux build 
1.0.4.? I am running on an FC11 machine.

On the FC11 box I used the svn link to build using the ff:

bootstarp.sh
configure withoout libcurl to eliinate the spidermonkey lib error
make
make install

Did I miss anything ?

In a nutshell I can get the sample test to work using a windows-based 
version

Thanks



d

Samuel 'Otis' Abekah-Mensah wrote:
> <div class="moz-text-flowed" style="font-family: -moz-fixed">Hello
>
> thanks so much. The machines are on the same lan , 2 have static IP 
> with one on DHCP just for variation . I do get there errors on stating FS
> 1. Error stacksize too large 4194303 offers advise to run ./freeswitch 
> -wate
> 2. Error checking for PMP [GENERAL ERROR]
> and
> 3. [WARNING] sofia_reg.c:1788: Can't register a pointer
> I do not know if any of this is could help The 2 boxes I run X-lite 
> from are windows 2k service pack 4
>
> Oh I ahve had a go and I am now getting  Error 403 - Forbidden on the 
> Xlite clients side.
>
> I have also tried using Zoiper but it seems to register but then comes 
> up with an error "bearercapability "
>
> Thanks for your time, Michael  and  may thanks Brian. I am not sure if 
> the iptables bit has caused the change from error 408 to error 403.
>
> Thanks; I apperecitae your help
> .
>
>
>
> Michael Collins wrote:
>>
>>
>> On Sat, Nov 14, 2009 at 5:18 PM, Samuel Abekah-Mensah 
>> <abeka at greatiam.com <mailto:abeka at greatiam.com>> wrote:
>>
>>     Hello
>>
>>     Please pardon me if the solution to this is somewhere already that I
>>     have been unable to locate. I have just got a straight 
>> out-of-the-box
>>     build of FS. According to the wiki, I should be able to test using
>>     user
>>     IDs 1001 and 1002. However, I am get the above error. If  I, 
>> however,
>>     un-tick register with domain  I do net get the error but does not
>>     communicate either. Is there a conf that I should have done ?
>>
>>     I am using X-lite3
>>
>>
>> Is NAT involved or are the x-lite clients on the same LAN? Also, you 
>> might want to turn on a SIP trace at the console to see if there are 
>> any clues.
>> -MC
>>
>
>
>
> </div>
>