[Freeswitch-users] DIalplan logic

Mon Nov 9 16:42:14 PST 2009

Thanks Anthony

that did the trick !

Excuse my ignorance - this is all new to me . . . 

It would help if I knew what I was doing, as I commented below, I copied the 

 <action application="set" data="hangup_after_bridge=true"/>
 <action application="set" data="continue_on_fail=true"/>

from the code for the default extensions (in the wrong order though obviously), without understanding what they were there for !

I've just stumbled across the Wiki page http://wiki.freeswitch.org/wiki/Extension_Status_Example - hopefully, I understand now

regards
Dave

  ----- Original Message ----- 
  From: Anthony Minessale 
  To: freeswitch-users at lists.freeswitch.org 
  Sent: Tuesday, November 10, 2009 12:29 AM
  Subject: Re: [Freeswitch-users] DIalplan logic

  You set both hangup_after_bridge and continue_on_fail after you already called bridge.
  Try setting it *before*

  Seems to be a running theme here that things will be parsed in a linear fashion that you may want to take note of.

  On Mon, Nov 9, 2009 at 6:18 PM, Dave Stevenson <stevendt at primrosebank.net> wrote:

    Well,

    I thought it was fixed - it is more or less working, with one more stumbling block.

    I have just posted a dump to the pastebin - from Dave (stevendt)

    The voice mail works - but too well.

    If the call is answered by a someone at this end - everything is fine until the user hangs up, then the remote party gets the voicemail messages.#

    Is there something else wrong with the dialplan logic below ?

    regards
    Dave

      ----- Original Message ----- 
      From: Dave Stevenson 
      To: freeswitch-users at lists.freeswitch.org 
      Sent: Monday, November 09, 2009 11:52 PM
      Subject: Re: [Freeswitch-users] DIalplan logic

      Michael,

      thanks a lot - it's fixed......

      you spotted exactly what the problem was !

            <condition field="destination_number" expression="^(100)$">

      <action application="voicemail" data="default ${domain_name} ${dialed_extension}"/>

      regards
      Dave

        ----- Original Message ----- 
        From: Michael Collins 
        To: freeswitch-users at lists.freeswitch.org 
        Sent: Monday, November 09, 2009 11:26 PM
        Subject: Re: [Freeswitch-users] DIalplan logic

        See comment inline

        On Mon, Nov 9, 2009 at 2:56 PM, Dave Stevenson <stevendt at primrosebank.net> wrote:

          Hi Guys,

          OK, with the RegEx help that you gave me, I have separated out the processing of extension 100 from 101 to 399 as I wanted.

          I have created a group (100) which contains a number of phones - 101 to 105 at the moment.

          When the PSTN line rings, I want all the extensions in the group to ring - that's the easy bit (I think - it's a copy of extension 2000 code)

             <extension name="group_dial_primrose">
                <condition field="destination_number" expression="^100$">
                      <action application="bridge" data="${group_call(primrose@${domain_name})}"/>
               </condition>
              </extension>

          That's fine and the nominated phones all ring.

          I'm struggling to get it to do what I want when some doesn't pick up though.

          All extensions ring as required, but their own dialplan entries (copies of the 1001 to 1005 code in the default dialplan) don't answer the call. That's fine, as you would not want every extension's voice mail to kick in.

          What I want to happen is for extension 100's voice mail to kick in after a time delay.

          So, get the dialed exetension number so that I can point at the right mailbox

          <action application="set" data="dialed_extension=$1"/>

          set the timeout for the call

           <action application="set" data="call_timeout=20"/>

          Added these lines - but don't know why - they are in the default extension code ?????

           <action application="set" data="hangup_after_bridge=true"/>
           <action application="set" data="continue_on_fail=true"/>
           <action application="answer"/>

          then go to voice mail on 100

           <action application="sleep" data="1000"/>
           <action application="voicemail" data="default ${domain_name}{dialed_extension}"/>

          giving 

           <extension name="group_dial_primrose">

        The following line needs to have 100 in parens like this: "^(100)$" because that's how you get $1 to be populated. 

                <condition field="destination_number" expression="^100$">
           <action application="set" data="dialed_extension=$1"/>
           <action application="set" data="call_timeout=20"/>
           <action application="bridge" data="${group_call(primrose@${domain_name})}"/>
           <action application="set" data="hangup_after_bridge=true"/>
           <action application="set" data="continue_on_fail=true"/>
           <action application="answer"/>
           <action application="sleep" data="1000"/>

        I think this might be a typo? Shouldn't this next line be ... data="default ${domain_name} ${dialed_extension}" 

           <action application="voicemail" data="default ${domain_name}{dialed_extension}"/>

                </condition>
              </extension>

          The voicemail kicks in, and prompts are correct (although the extension name is not spoken) but the wav file is saved in the 1001 directory not 100 and neither extension 100 or 1001 think that have any voice mail messages.

          Can someone help please ?

          Where am i going wrong ?

        Make those changes, reloadxml, and then try again. Be sure to capture a debug log if it doesn't work and put that log in pastebin.freeswitch.org.
        -MC

------------------------------------------------------------------------

        _______________________________________________
        FreeSWITCH-users mailing list
        FreeSWITCH-users at lists.freeswitch.org
        http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
        UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
        http://www.freeswitch.org

--------------------------------------------------------------------------

      _______________________________________________
      FreeSWITCH-users mailing list
      FreeSWITCH-users at lists.freeswitch.org
      http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
      UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
      http://www.freeswitch.org

    _______________________________________________
    FreeSWITCH-users mailing list
    FreeSWITCH-users at lists.freeswitch.org
    http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
    UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
    http://www.freeswitch.org

  -- 
  Anthony Minessale II

  FreeSWITCH http://www.freeswitch.org/
  ClueCon http://www.cluecon.com/
  Twitter: http://twitter.com/FreeSWITCH_wire

  AIM: anthm
  MSN:anthony_minessale at hotmail.com
  GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com
  IRC: irc.freenode.net #freeswitch

  FreeSWITCH Developer Conference
  sip:888 at conference.freeswitch.org
  iax:guest at conference.freeswitch.org/888
  googletalk:conf+888 at conference.freeswitch.org
  pstn:213-799-1400

------------------------------------------------------------------------------

  _______________________________________________
  FreeSWITCH-users mailing list
  FreeSWITCH-users at lists.freeswitch.org
  http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
  UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
  http://www.freeswitch.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20091110/63e062d0/attachment-0002.html 