[Freeswitch-users] rtpDir Freeswitch

Thu May 7 04:44:27 PDT 2009

Roger on the previous post asking the question some time ago.

I don't have time to get into this sort of thing, I've got too much on  
my plate right now as it is.

Hopefully someone will take up the challenge.

I've cross-posted this  to the freeswitch forum.

73 de n2vqm

Best Regards,
Karl J. Vesterling
kjv at ken-ton.com
202-461-3231 x0

On May 6, 2009, at 10:28 PM, ham44865 wrote:

>
>
> Karl, I just remembered
> about a few months back, someone logged in here and
> asked the same thing and I sent him all
> the channel drivers I had, except chan_dstar.c(NEW at the time).
> Anyway, now it is all OPEN SOURCE.
>
> I dont know if he did something with them, but I found his posts
> and my posts and pasted them now here.
> Maybe he did something with them, I dont know.
>
> In eithe case, chan_rtpdir.c and chan_dstar.c are posted here.
>
> Question for you:
>
> chan_rtpdir.c and chan_dstar.c talk to a radio application
> within asterisk so that the audio can go over the air.
>
> Is there any application inside Freeswitch that we can use
> to interface chan_dstar.c and chan_rtpdir.c with ?
>
> Anyway the posts are 711 and 712 and here they are:
>
> ==========================================
> Great, the more options the better.
>
> I will send you the Echolink channel driver and the
> IRLP channel driver for Asterisk.
> For IRLP you could also download Speak-Freely but it is
> messy code.
> Any questions you may have, let me know.
>
> 73,
> de KI4LKF
>
> --- In rtpDir at yahoogroups.com, "Gerry Hull" <gerry at ...> wrote:
> >
> > Hi All,
> >
> > rptDir looks pretty cool. I am doing a lot of work witrh
> FreeSwitch, an
> > open-source softswitch (http://www.freeswitch.org). It is much more
> > scaleable and flexible than
> > Asterisk (though I use Asterisk also).
> >
> > I'd like to write IRLP/Echolink conferencing for FreeSwitch. Are
> their any
> > good documents descibing the protocols, or are my only  
> alternatives to
> > reverse-engineer the existing code?
> >
> > Of course, my resulting code would be open source.
> >
> > 73, Gerry W1VE
> > sip: gerry at w1ve.com
>
> ================================================
>
> --- In rtpDir at yahoogroups.com, Karl Vesterling <kjv at ...> wrote:
> >
> > Roger on the channel drivers.
> >
> > www.freeswitch.org
> >
> >
> > Best Regards,
> > Karl J. Vesterling
> > kjv at ...
> > 202-461-3231 x0
> >
> > On May 6, 2009, at 9:00 PM, ham44865 wrote:
> >
> > >
> > >
> > > Is there anything in Freeswitch that resembles
> > > "channel drivers".
> > >
> > > I am sure we can take the channel drivers I have for
> > > Asterisk and maybe with a few modifications
> > > make them run in Freeswitch.
> > >
> > > For example: I have
> > > chan_rtpdir.c(for IRLP, Echolink),
> > > and chan_dstar.c (for D-STAR)
> > >
> > > They call these things channel drivers.
> > > I guess in Freeswitch, you might call them "patches",
> > > not sure, but whatever they call them in Freeswitch,
> > > we can port them to run there also.
> > >
> > > I am not familiar with Freeswitch, but it seems
> > > a interesting project.
> > >
> > > I am not endorsing asterisk over Freeswitch.
> > > I'd say the more competition the better.
> > > I do not use asterisk at all, neither Freeswitch.
> > > I just write and develop code for others to run.
> > >
> > > My main platform is rtpDir(D-STAR, Echolink, IRLP).
> > > Let me know if I can help with Freeswitch
> > >
> > > 73
> > > Scott
> > >
> > > --- In rtpDir at yahoogroups.com, Karl Vesterling <kjv@> wrote:
> > > >
> > > > Folks;
> > > >
> > > > I notice there is a way to patch the rtp-dir into Asterisk,  
> but what
> > > > about Freeswitch?
> > > > Has there been any development in that area?
> > > >
> > > > The reason I ask is because I was running Asterisk for years,  
> but as
> > > > of late last summer switched to Freeswitch to gain stability and
> > > > capability over Asterisk.
> > > >
> > > > Hence, setting up rtpdir and integrating it into the VoIP  
> network
> > > > (we're mostly hams) would imply some sort of Asterisk  
> installation
> > > at
> > > > each of the locations. And that's not an option any of us are  
> likely
> > > > to entertain.
> > > >
> > > > The main problem with asterisk problem with asterisk with  
> asterisk
> > > was
> > > > the lengthy echoes that we encountered that we encountered
> > > encountered
> > > > that we encountered 'click'.
> > > >
> > > > We like our VoIP solid, secure, and free of problems.
> > > >
> > > >
> > > > Best Regards,
> > > > Karl J. Vesterling
> > > > kjv@
> > > > 202-461-3231 x0
> > > >
> > > > On May 6, 2009, at 6:15 PM, ham44865 wrote:
> > > >
> > > > >
> > > > >
> > > > > There will be no need any more for the
> > > > > dextra_srv D-STAR gateway owner to create or maintain
> > > > > the Berkeley DB database file dextra.db used by dextra_srv D- 
> STAR
> > > > > gateway,
> > > > > because direct access to ICOM's Postgres database will
> > > > > be used by dextra_srv.
> > > > >
> > > > > As you know, dextra_srv is an OPEN SOURCE replacement
> > > > > to the "closed source" dplus.
> > > > >
> > > > > 73
> > > > > Scott
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> > >
> >
>
>
> __._,_.___
> Messages in this topic (5)Reply (via web post) | Start a new topic
> Messages | Members
>
> Change settings via the Web (Yahoo! ID required)
> Change settings via email: Switch delivery to Daily Digest | Switch  
> format to Traditional
> Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
> RECENT ACTIVITY
> 12
> New Members
> 14
> New Files
> Visit Your Group
> Give Back
> Yahoo! for Good
> Get inspired
> by a good cause.
> Y! Toolbar
> Get it Free!
> easy 1-click access
> to your groups.
> Yahoo! Groups
> Start a group
> in 3 easy steps.
> Connect with others.
> .
>
> __,_._,___

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090507/4c81c41d/attachment-0002.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PGP.sig
Type: application/pgp-signature
Size: 833 bytes
Desc: This is a digitally signed message part
Url : http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090507/4c81c41d/attachment-0002.bin 