[Freeswitch-users] Total noob question
Michael Collins
msc at freeswitch.org
Fri May 8 08:29:57 PDT 2009
Lars,
May I suggest this process:
make clean && svn up && ./bootstrap.sh && ./configure && make install
It's one step less intensive than starting with a fresh checkout. I just did
that on four systems last night that all had a buggy build with cluechoo and
file_string and now all four are humming along nicely.
-MC
On Fri, May 8, 2009 at 6:54 AM, Lars Zeb <larclap at yahoo.com> wrote:
> In launching freeswitch, I noticed the errors below, plus many more I did
> not copy here. Also the mod directory had only two modules in it, so I
> rebuilt from the tarball again. Same results.
>
> I did ./configure, make and make install. What have I done wrong?
>
> Thanks, Lars
>
> 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
> switch_loadable_module_load_file() Error Loading module
> /usr/local/freeswitch/mod/mod_console.so
> **/usr/local/freeswitch/mod/mod_console.so: cannot open shared object file:
> No such file or directory**
> 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
> switch_loadable_module_load_file() Error Loading module
> /usr/local/freeswitch/mod/mod_logfile.so
> **/usr/local/freeswitch/mod/mod_logfile.so: cannot open shared object file:
> No such file or directory**
> 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
> switch_loadable_module_load_file() Error Loading module
> /usr/local/freeswitch/mod/mod_enum.so
> **/usr/local/freeswitch/mod/mod_enum.so: cannot open shared object file: No
> such file or directory**
> 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:314 load_config() Adding default
> template.
> 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
> sql.
> 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
> example.
> 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
> snom.
> 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
> linksys.
> 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
> asterisk.
> 2009-05-08 05:52:32 [CONSOLE] switch_loadable_module.c:889
> switch_loadable_module_load_file() Successfully Loaded [mod_cdr_csv]
> 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
> switch_loadable_module_load_file() Error Loading module
> /usr/local/freeswitch/mod/mod_event_socket.so
> **/usr/local/freeswitch/mod/mod_event_socket.so: cannot open shared object
> file: No such file or directory**
> 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
> switch_loadable_module_load_file() Error Loading module
> /usr/local/freeswitch/mod/mod_sofia.so
> **/usr/local/freeswitch/mod/mod_sofia.so: cannot open shared object file:
> No
> such file or directory**
> 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
> switch_loadable_module_load_file() Error Loading module
> /usr/local/freeswitch/mod/mod_loopback.so
> **/usr/local/freeswitch/mod/mod_loopback.so: cannot open shared object
> file:
> No such file or directory**
> 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
> switch_loadable_module_load_file() Error Loading module
> /usr/local/freeswitch/mod/mod_commands.so
> **/usr/local/freeswitch/mod/mod_commands.so: cannot open shared object
> file:
> No such file or directory**
> ...
> FreeSWITCH Version 1.0.4pre7 (13238M) Started.
> Crash Protection [Disabled]
> Max Sessions[1000]
> Session Rate[30]
> SQL [Enabled]
>
> fs:/usr/local/freeswitch/mod # l
> total 104
> drwxr-xr-x 2 root root 4096 2009-05-08 06:23 ./
> drwxr-xr-x 13 root root 4096 2009-05-08 06:23 ../
> -rwxr-xr-x 1 root root 37098 2009-05-08 06:23 mod_amr.so*
> -rwxr-xr-x 1 root root 52950 2009-05-08 06:23 mod_cdr_csv.so*
>
>
> make[5]: *** [mod_cluechoo.lo] Error 1
> make[4]: *** [all] Error 1
> make[3]: *** [mod_cluechoo-all] Error 1
> make[2]: *** [all-recursive] Error 1
> Making all in build
> +-------- FreeSWITCH Build Complete -----------+
> + FreeSWITCH has been successfully built. +
> + Install by running: +
> + +
> + make install +
> +----------------------------------------------+
> make[1]: *** [all-recursive] Error 1
> make: *** [all] Error 2
>
> Making install in build
> +-------- FreeSWITCH install Complete ----------+
> + FreeSWITCH has been successfully installed. +
> + +
> ...
> + +
> +-----------------------------------------------+
> make[1]: *** [install-recursive] Error 1
> make: *** [install] Error 2
>
>
> -----Original Message-----
> From: freeswitch-users-bounces at lists.freeswitch.org
> [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Jason
> White
> Sent: Thursday, May 07, 2009 6:25 PM
> To: freeswitch-users at lists.freeswitch.org
> Subject: Re: [Freeswitch-users] Total noob question
>
> Lars Zeb <larclap at yahoo.com> wrote:
> > I have installed from the 1.0.4pre7 tarball on a openSuse 11.1.
> >
> > Why is it that after I launch freeswitch and type in either 'show' or
> > 'status' at the console, it responds with 'Unknown command', but it does
> > accept 'shutdown'?
>
> Maybe the mod_commands module wasn't loaded. Check your logs, and try
> "load mod_commands" from the FreeSWITCH console.
>
> That module should have been loaded unless there is something seriously
> wrong
> with the build or installation process.
>
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090508/1a52caee/attachment.html
More information about the Freeswitch-users
mailing list