[Freeswitch-users] sipp emulating a registered end point

[Jonas Gauffin]

thanks!

2009/3/27 Thomas Troy <ttroy50 at gmail.com>

> When I need to do something like this, what I do is set sipp2 to have 2
> scripts both using the same IP and port.
>
> One sends the register and deals with authentication \ OK.
> The other is then run after this to wait and receive the incoming call.
>
> So you would run them like
>
> sipp2_register                   - Performs registration and ends
> sipp2_receiveCall              - Waits for incoming call, while listening
> on same IP \ Port as sipp2_register
> sipp1_makeCall                - Makes outgoing call
>
>
> A sample register scenario is
>
>
> <scenario name="Register">
>   <send start_rtd="1" retrans="500">
>     <![CDATA[
>
>       REGISTER sip:[remote_ip]:[remote_port] SIP/2.0
>       Via: SIP/2.0/[transport]
> [local_ip]:[local_port];branch=[branch]1;rport
>       Max-Forwards: 70
>       To: TestUser1 <sip:user@[remote_ip]:[remote_port]>
>       From: TestUser1 <sip:user@
> [remote_ip]:[remote_port]>;tag=[pid][call_number]
>       Call-ID: [call_id]
>       CSeq: 1 REGISTER
>       Contact: <sip:user@[local_ip]:[local_port]>
>       Expires: 240
>       User-Agent: SIPp
>       Content-Length: 0
>
>     ]]>
>   </send>
>
>   <recv response="401" rtd="1" auth="true">
>   </recv>
>
>   <send start_rtd="2" retrans="500">
>     <![CDATA[
>
>       REGISTER sip:[remote_ip]:[remote_port] SIP/2.0
>       Via: SIP/2.0/[transport]
> [local_ip]:[local_port];branch=[branch]2;rport
>       Max-Forwards: 70
>       To: TestUser1 <sip:user@[remote_ip]:[remote_port]>
>       From: TestUser1 <sip:user@
> [remote_ip]:[remote_port]>;tag=[pid][call_number]
>       Call-ID: [call_id]
>       CSeq: 2 REGISTER
>       Contact: <sip:user@[local_ip]:[local_port]>
>       Expires: 240
>       User-Agent: SIPp
>       [authentication username=user password=pass]
>       Content-Length: 0
>
>     ]]>
>   </send>
>
>   <recv response="200" rtd="2">
>   </recv>
>
>   <ResponseTimeRepartition value="10, 20, 30, 40, 50, 100, 250, 500"/>
>
> </scenario>
>
>
>
>
>
>
> 2009/3/26 Jonas Gauffin <jonas.gauffin at gmail.com>
>
>> Hello
>> I want to achive this: Sipp1 -> FS -> Sipp2
>>
>> Sipp1 emulates a inbound calls (easy to achive)
>> Sipp2 should emulate a registered user (i.e. register with FS and then
>> just wait for calls and hangup when sipp1 hangsup)
>>
>> How do I configure sipp as "Sipp2"?
>>
>> Thanks,
>>   Jonas
>>
>> _______________________________________________
>> Freeswitch-users mailing list
>> Freeswitch-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090327/03dc6d51/attachment-0002.html