[Freeswitch-users] OpenZap and Sangoma A500 BRI card

[Michael Collins]

> [devices]
> wanpipe1 = WAN_AFT_TE1, Comment
>
> [interfaces]
> wp1aft1 = wanpipe1, auto, API, Comment
> wp1aft2 = wanpipe1, auto, API, Comment
>
> [wanpipe1]
> CARD_TYPE         = AFT
> S514CPU           = A
> CommPort          = PRI
> AUTO_PCISLOT      = NO
> PCISLOT           = 4
> PCIBUS            = 5
> FE_MEDIA          = E1
> FE_LCODE          = HDB3
> FE_FRAME          = CRC4
> FE_LINE           = 1
> TE_CLOCK          = NORMAL
> TE_REF_CLOCK      = 0
> TE_HIGHIMPEDANCE  = NO
> TE_RX_SLEVEL      = 120
> LBO               = 120OH
> TE_SIG_MODE       = CCS
> FE_TXTRISTATE     = NO
> MTU               = 1500
> UDPPORT           = 9000
> TTL               = 255
> IGNORE_FRONT_END  = NO
> TDMV_HW_DTMF      = NO
>
> [wp1aft1]
> HDLC_STREAMING  = NO
> ACTIVE_CH       = 1-15.17-31
> IDLE_FLAG       = 0x7E
> MTU             = 240
> MRU             = 240
> DATA_MUX        = NO
> TDMV_HWEC       = NO
>
> [wp1aft2]
> HDLC_STREAMING  = YES
> ACTIVE_CH       = 16
> MTU             = 1500
> MRU             = 1500
> DATA_MUX        = NO
> TDMV_HWEC       = NO
>

I'm no BRI expert but it looks to me like your wanpipe is set up for
E1/EuroISDN. Where did you get this setup information?
-MC