[Freeswitch-users] How do I get a 180 ringing to be sent to an inbound call ?

[Richard Lamkin]

I have a setup where I have a variety of SIP inbound calls (originated
from PSTN)  coming from a SIP provider.  The SIP lines are single lines
registered with the provider.  The provider is running with a Nortel
CS2K. 

 

I am putting together  a simple event driven operator attendant console
and I would like to set up a call queuing system where the incoming
calls are not  answered until an operator is ready to accept a call. I
want the operator to know that a call is in the ringing Q and who it is
from. I do not want to auto answer the call and put them in a MOH Q
because  the originator will be charged as soon as the call is answered.


 

My question is how do I get a SIP 180 ringing to be sent to an inbound
call and put that call in a Q?  The CS2k does convert ringing on inbound
calls to media towards the originator.  I've looked  through the wiki
for examples but not found what I need in either in dial plan or fifo
operations.

 

Any help would be gratefully appreciated. 

 

Regards

 

Richard Lamkin

Richard.lamkin at mettonigroup.com 

 


*************************************************************************
Please consider the environment before printing this e-mail
*************************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.  http://www.mettoni.com

Mettoni Ltd
Registered in England and Wales: 4485956
9400 Garsington Road, Oxford Business Park, Oxford, OX4 2HN
*************************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090615/5fa3920d/attachment-0002.html