[Freeswitch-users] Can't hear outbound calls

[Lars Zeb]

Thanks for the explanation, Brian; it was lost on me before.

 

It was a DLink DIR-625 which had UPnP enabled. I turned it off. 

 

It looks like the error message only appears on the console when started
without the nc option; and it does not appear in log/freeswitch.log in any
case.

 

2009-06-09 16:24:32.271913 [INFO] switch_event.c:564 Activate Eventing
Engine.

2009-06-09 16:24:32.274131 [DEBUG] switch_event.c:552 Create event dispatch
thread 0

2009-06-09 16:24:32.663627 [INFO] switch_nat.c:159 Scanning for NAT

2009-06-09 16:24:32.664053 [DEBUG] switch_nat.c:127 Checking for PMP 1/5

2009-06-09 16:24:32.913583 [DEBUG] switch_nat.c:127 Checking for PMP 2/5

2009-06-09 16:24:32.914581 [DEBUG] switch_nat.c:127 Checking for PMP 3/5

2009-06-09 16:24:33.415479 [DEBUG] switch_nat.c:127 Checking for PMP 4/5

2009-06-09 16:24:34.415249 [DEBUG] switch_nat.c:127 Checking for PMP 5/5

2009-06-09 16:24:36.413782 [DEBUG] switch_nat.c:164 Checking for UPnP

2009-06-09 16:24:38.906588 [ERR] switch_nat.c:96 uPNP Device (url:
http://192.168.10.253:4444/wipconn) returned an invalid external address of
0.0.0.0.  Disabling uPNP

2009-06-09 16:24:38.906633 [INFO] switch_nat.c:174 No PMP or UPnP NAT
detected!

2009-06-09 16:24:38.908650 [INFO] switch_core_sqldb.c:507 Opening DB

2009-06-09 16:24:38.950200 [NOTICE] switch_scheduler.c:166 Starting task
thread

 

Thanks, Lars

 

From: freeswitch-users-bounces at lists.freeswitch.org
[mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Brian
West
Sent: Tuesday, June 09, 2009 2:33 PM
To: freeswitch-users at lists.freeswitch.org
Subject: Re: [Freeswitch-users] Can't hear outbound calls

 

You have to start freeswitch without -nc to see it. Only happens during
start up.

 

/b

 

On Jun 9, 2009, at 4:26 PM, Lars Zeb wrote:





Rupa,

 

Thanks for the detailed response. After upgrading from 13639 to 13732, I see
no log errors. I am accessing Freeswitch vi fs_cli, but I did look in
log/freeswitch.log. Certainly I see nothing that looks like your ERR below.

 

I too have a dlink router. I will look at its configuration and see if upnp
is enabled.

 

Lars

 

Brian West

brian at freeswitch.org

 

-- Meet us at ClueCon!  http://www.cluecon.com <http://www.cluecon.com/> 

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090609/8bd8a80e/attachment-0002.html