[Freeswitch-users] Can't hear outbound calls

[Lars Zeb]

http://pastebin.freeswitch.org/9319

 

From: freeswitch-users-bounces at lists.freeswitch.org
[mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Brian
West
Sent: Monday, June 08, 2009 7:39 PM
To: freeswitch-users at lists.freeswitch.org
Subject: Re: [Freeswitch-users] Can't hear outbound calls

 

pastebin your profile config and the output of global_getvar

 

/b

 

On Jun 8, 2009, at 9:24 PM, Lars Zeb wrote:





I had a working FS installation which I messed up by doing a fresh install.
I tried to integrate all my custom changes, but I'm sure I screwed something
up.

 

The symptom is on an outbound call, sometimes I can hear ringing, other
times I cannot. Finally I can see FS connects via a softphone, but I hear
only silence. The other side of the conversation hears static.

 

I pasted a siptrace of the external profile. The Contact, Via and SDP shows
an address 0.0.0.0.  http://pastebin.freeswitch.org/9318

 

FS exists on a LAN behind a NAT firewall along with all its clients. There
is a SwitchVox system which predates the FS. I had to use an external sip =
5090 for FS. Also I think I had to use a different WAN address
(xxx.xxx.xxx.83, which is the address mapped to 5090) than the one FS came
up with (xxx.xxx.xxx.82), but I can't figure out where I set this address.

 

I would appreciate any help. Thanks, Lars

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090608/9e2f9a3a/attachment-0002.html