[Freeswitch-users] busy tone detect issue
god.nirvana
god.nirvana at gmail.com
Thu Jun 4 07:19:54 PDT 2009
hi all
i am new to freeswitch.
there are some busy tone detect issues,i hope someone could help me.
i installed freeswitch from trunk,openzap,zaptel....
but i found some busy tone isuues
my tones.conf:
[us]
generate-dial => v=-7;%(1000,0,350,440)
detect-dial => 350,440
generate-ring => v=-7;%(2000,4000,440,480)
detect-ring => 440,480
generate-busy => v=-7;%(500,500,450,340)
detect-busy =>450,340
generate-attn => v=0;%(100,100,1400,2060,2450,2600)
detect-attn => 1400,2060,2450,2600
generate-callwaiting-sas => v=0;%(300,0,440)
detect-callwaiting-sas => 440
generate-callwaiting-cas => v=0;%(80,0,2750,2130)
detect-callwaiting-cas => 2750,2130
detect-fail1 => 913.8
detect-fail2 => 1370.6
detect-fail3 => 776.7
openzap.conf:
[span zt FXO1]
name => OpenZAP-FXO1
number => 1
fxo-channel => 1
[span zt FXO2]
name => OpenZAP-FXO2
number => 2
fxo-channel => 2
[span zt FXO3]
name => OpenZAP-FXO3
number => 3
fxo-channel => 3
[span zt FXO4]
name => OpenZAP-FXO4
number => 4
fxo-channel => 4
openzap.conf.xml :
<configuration name="openzap.conf" description="OpenZAP Configuration">
<settings>
<param name="debug" value="0"/>
<!--<param name="hold-music" value="$${moh_uri}"/>-->
<!--<param name="enable-analog-option" value="call-swap"/>-->
<!--<param name="enable-analog-option" value="3-way"/>-->
</settings>
<pri_spans>
<span name="PRI_1">
<!-- Log Levels: none, alert, crit, err, warning, notice, info, debug -->
<param name="q921loglevel" value="alert"/>
<param name="q931loglevel" value="alert"/>
<param name="mode" value="user"/>
<param name="dialect" value="5ess"/>
<param name="dialplan" value="XML"/>
<param name="context" value="default"/>
</span>
<span name="PRI_2">
<param name="q921loglevel" value="alert"/>
<param name="q931loglevel" value="alert"/>
<param name="mode" value="user"/>
<param name="dialect" value="5ess"/>
<param name="dialplan" value="XML"/>
<param name="context" value="default"/>
</span>
</pri_spans>
<!-- one entry here per openzap span -->
<analog_spans>
<span id="1">
<!--<param name="hold-music" value="$${moh_uri}"/>-->
<!--<param name="enable-analog-option" value="call-swap"/>-->
<!--<param name="enable-analog-option" value="3-way"/>-->
<param name="tonegroup" value="us"/>
<param name="digit-timeout" value="2000"/>
<param name="max-digits" value="11"/>
<param name="dialplan" value="XML"/>
<param name="context" value="default"/>
<param name="enable-callerid" value="true"/>
<!-- regex to stop dialing when it matches -->
<!--<param name="dial-regex" value="5555"/>-->
<!-- regex to stop dialing when it does not match -->
<!--<param name="fail-dial-regex" value="^5"/>-->
</span>
<span id="2">
<!--<param name="hold-music" value="$${moh_uri}"/>-->
<!--<param name="enable-analog-option" value="call-swap"/>-->
<!--<param name="enable-analog-option" value="3-way"/>-->
<param name="tonegroup" value="us"/>
<param name="digit-timeout" value="2000"/>
<param name="max-digits" value="11"/>
<param name="dialplan" value="XML"/>
<param name="context" value="default"/>
<param name="enable-callerid" value="true"/>
<!-- regex to stop dialing when it matches -->
<!--<param name="dial-regex" value="5555"/>-->
<!-- regex to stop dialing when it does not match -->
<!--<param name="fail-dial-regex" value="^5"/>-->
</span>
<span id="3">
<!--<param name="hold-music" value="$${moh_uri}"/>-->
<!--<param name="enable-analog-option" value="call-swap"/>-->
<!--<param name="enable-analog-option" value="3-way"/>-->
<param name="tonegroup" value="us"/>
<param name="digit-timeout" value="2000"/>
<param name="max-digits" value="11"/>
<param name="dialplan" value="XML"/>
<param name="context" value="default"/>
<param name="enable-callerid" value="true"/>
<!-- regex to stop dialing when it matches -->
<!--<param name="dial-regex" value="5555"/>-->
<!-- regex to stop dialing when it does not match -->
<!--<param name="fail-dial-regex" value="^5"/>-->
</span>
<span id="4">
<!--<param name="hold-music" value="$${moh_uri}"/>-->
<!--<param name="enable-analog-option" value="call-swap"/>-->
<!--<param name="enable-analog-option" value="3-way"/>-->
<param name="tonegroup" value="us"/>
<param name="digit-timeout" value="2000"/>
<param name="max-digits" value="11"/>
<param name="dialplan" value="XML"/>
<param name="context" value="default"/>
<param name="enable-callerid" value="true"/>
<!-- regex to stop dialing when it matches -->
<!--<param name="dial-regex" value="5555"/>-->
<!-- regex to stop dialing when it does not match -->
<!--<param name="fail-dial-regex" value="^5"/>-->
</span>
</analog_spans>
</configuration>
when i call the pstn phone from a ip phone,if the pstn call hangup first,the ip phone will hear the busy tone,but the system does not handle the busytone ,the channel does not erase. so i have to add
<action application="tone_detect" data="busy 450,340 w +25000 hangup 'normal_clearing' 3"/> in the dialplan.and it works.the channel erased.
but in the conference case,pstn phone call in,hangup. all participants hear the tone,"do ~,do~~".freeswitch doest handle it.
so i change the conference dialplan.
<extension name="incoming-fxo-channel-1">
<condition field="source" expression="mod_openzap">
<action application="tone_detect" data="busy 450,340 w +25000 hangup 'normal_clearing' 3"/>
<action application="bridge" data="sofia/maqian/6789 at njpbx.vicp.net"/>
</condition>
</extension>
restart freeswitch,try again,freeswitch not handle the hangup tone still,all participants hear the tone.
how to solve it?could some one help me ???
thx!
BR
M.Q
2009-06-04
god.nirvana
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090604/47dd5d21/attachment-0002.html
More information about the FreeSWITCH-users
mailing list