[Freeswitch-users] Sangoma a101

[Peter P GMX]

Firstly I would try get get rid of the sangoma errors. There are 2 errors:

Short Circuit:  ON
Loss of Signal: ON

So either the card is not configured correctly or there is a cabling
problem. What is your wanpipe1.conf?

Second, if euro doesn't work, try Q931.
I had success with that some time ago.

Best regards
Peter

Niall Crosby schrieb:
> Hi,
>
> This might be Sangoma config issue, so apologies in advance for
> posting it here if it is. I am waiting for Sangoma helpdesk to get
> back to me!
>
> But I have a Sangoma a101 and trying to get it working with
> Freeswitch. Have E1 line coming from telco and everything set up
> correctly (to my best efforts), however when Freeswitch starts, it
> says:
>
> 2009-07-30 15:17:15.446569 [ERR] mod_openzap.c:1953 Error starting
> OpenZAP span 1 mode: user dialect: euro error:
>
> Also I'm getting the following Sangoma alarms:
>
> ***** w1g1: E1 Alarms (Framer) *****
>
> ALOS:   OFF     | LOS:  ON
> RED:    ON      | AIS:  OFF
> OOF:    ON      | RAI:  OFF
>
> ***** w1g1: E1 Alarms (LIU) *****
>
> Short Circuit:  ON
> Open Circuit:   OFF
> Loss of Signal: ON
>
>
> Can someone tell me where I should be focusing my attention - on the
> Sangoma config or the Freeswitch config?
>
> Also what state should the Sangoma alarms be in when Freeswitch is NOT
> running? Should they all clear?
>
> Thanks in advance,
> Niall.
>
>
>