[Freeswitch-users] OpenZAP and FreeSWITCH w/ Sangoma

[Kareem Hamdy]

Hello:

I would like to connect a Sangoma T1 card to FreeSWITCH.  Most of the docs I see pertain to a PRI.  When I leave out the d-chan notation, I get errors regarding not able to get the d-chan up and running in the CLI.

Here's my info:

[span wanpipe T1]
trunk_type => t1
b-channel => 1:1-24

[span wanpipe T2]
trunk_type => t1
b-channel => 2:1-24

----

#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Dec  6 20:29:03 UTC 2006
#
# Note: This file was generated automatically
#       by /usr/local/sbin/setup-sangoma program.
#
#       If you want to edit this file, it is
#       recommended that you use wancfg program
#       to do so.
#================================================
# Sangoma Technologies Inc.
#================================================

[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
w1g1 = wanpipe1, , TDM_VOICE_API, Comment

[wanpipe1]
CARD_TYPE       = AFT
S514CPU         = A
CommPort        = PRI
AUTO_PCISLOT    = NO
PCISLOT         = 1
PCIBUS          = 6
FE_MEDIA        = T1
FE_LCODE        = B8ZS
FE_FRAME        = ESF
FE_LINE         = 1
TE_CLOCK        = NORMAL
TE_REF_CLOCK    = 0

TE_HIGHIMPEDANCE        = NO
LBO             = 0DB
FE_TXTRISTATE   = NO
MTU             = 1500
UDPPORT         = 9000
TTL             = 255
IGNORE_FRONT_END = NO
TDMV_SPAN       = 1
TDMV_DCHAN      = 0
TDMV_HW_DTMF    = YES
TDMV_HW_FAX_DETECT = NO

[w1g1]
ACTIVE_CH       = ALL
TDMV_HWEC       = YES
MTU             = 80


---



In freeSWITCH's openzap.conf.xml, I've tried pri_span as well as analog.

I cannot find a straight up T1 wiki anywhere.  Would someone please provide an example?


Thanks,
Kareem