[Freeswitch-users] Q931 TE State Timer

Helmut Kuper helmut.kuper at ewetel.de
Mon Jul 20 02:44:29 PDT 2009


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello community,


to keep you informed about this. I got an early copy of the new openzap
ISDN stack. I did some changes to get it running with my uplink
provider. Most were dedicated to my uplink provider (AVAYA PBX, e.g.
needed IEs in CALL_PROC, missed CON ACK, debug messages, ...) and a few
were more general (like auto recover after a long term E1 link
disconnect, not handled PROGRESS messages in cetrain call states, addind
Timerhandlinf or call tear down)

Since last friday I use it my prod environment (E1, Q931-TE,
enBlock-Dialing). I have currently no problems. Timers work as expected
and seems to keep the stack clean, although not all timers are
implemented, yet ...

So far Stefan and Tony did a very good job so far.


Here is a snippet from my log showing the handling of my old originate
problem of a missed RELEASE message from uplink after sending a
DISCONNECT by the NEW stack:


2009-07-20 11:05:40.208698 [DEBUG] ozmod_isdn.c:1999 WRITE 9
-
--------------------------------------------------------------------------------
[08 02 80 1e 45 08 02 81 90]

2009-07-20 11:05:40.208698 [NOTICE] Span:1 Starting timer 6 (timeout:
30000 ms) for call 30 [0x1e]
2009-07-20 11:05:40.208698 [DEBUG] Span:1 Call going from state 8 -> 11
2009-07-20 11:05:40.208698 [DEBUG] Span:1 Q931Rx43 return code: 0

[Waiting for RELEASE]

2009-07-20 11:06:10.279950 [NOTICE] Span:1 Stopping timer 6 for call 30
[0x1e]
2009-07-20 11:06:10.279950 [NOTICE] Span:1 Timer T305 timed out for call 30
2009-07-20 11:06:10.279950 [DEBUG] Span:1 Receiving message from Layer4
(size: 109, type: 77 [0x4d], CRV: 30, CRVFlag: 0)
2009-07-20 11:06:10.279950 [NOTICE] Span:1 Handling message from Layer4
in call state: 11
2009-07-20 11:06:10.279950 [DEBUG] Span:1 Processing RELEASE message
from Local for CRV: 30 (0x1e)
2009-07-20 11:06:10.279950 [DEBUG] Span:1 Sending message to Q.921
(size: 109)
2009-07-20 11:06:10.279950 [DEBUG] Span:1 Creating Q.931 Message Header:
    ProtDisc 8 (0x8), CRV 30 (0x1e), CRVflag: 1 (0x1), MesType: 77 (0x4d)
2009-07-20 11:06:10.279950 [DEBUG] Span:1 XXX Adding IE 0x8
2009-07-20 11:06:10.279950 [DEBUG] Span:1 XXX Adding IE 0x28
2009-07-20 11:06:10.279950 [DEBUG] Span:1 XXX Adding IE 0x34
2009-07-20 11:06:10.279950 [DEBUG] Span:1 XXX Adding IE 0x1c
2009-07-20 11:06:10.279950 [NOTICE] Span:1 Unable to get reference for
IE 28 (0x1c)
2009-07-20 11:06:10.279950 [DEBUG] Span:1 XXX Adding IE 0xd
2009-07-20 11:06:10.279950 [NOTICE] Span:1 Unable to get reference for
IE 13 (0xd)
2009-07-20 11:06:10.279950 [DEBUG] ozmod_isdn.c:1999 WRITE 9
-
--------------------------------------------------------------------------------
[08 02 80 1e 4d 08 02 81 e6]

2009-07-20 11:06:10.279950 [NOTICE] Span:1 Starting timer 9 (timeout:
4000 ms) for call 30 [0x1e]
2009-07-20 11:06:10.279950 [DEBUG] Span:1 Call going from state 11 -> 19
2009-07-20 11:06:10.279950 [DEBUG] Span:1 Q931Rx43 return code: 0
2009-07-20 11:06:10.419951 [DEBUG] ozmod_isdn.c:1181 READ 9
-
--------------------------------------------------------------------------------
[08 02 00 1e 5a 08 02 81 d1]

2009-07-20 11:06:10.419951 [DEBUG] Span:1 Call is in state 19 [Release
request]
2009-07-20 11:06:10.419951 [DEBUG] Span:1 Received message from Q.921
(ind 4, tei 0, size 13)
MesType: 90, CRVFlag 0 (Originator), CRV 30 (Dialect: Q.931 TE)
2009-07-20 11:06:10.419951 [DEBUG] Span:1 Processing RELEASE COMPLETE
message from Remote for CRV: 30 (0x1e)
2009-07-20 11:06:10.419951 [NOTICE] Span:1 Stopping timer 9 for call 30
[0x1e]
2009-07-20 11:06:10.419951 [DEBUG] Span:1 Sending message to Layer4
(size: 110)
2009-07-20 11:06:10.419951 [DEBUG] ozmod_isdn.c:696 Yay I got an event!
Type:[5a] Size:[110] CRV: 30 (0x1e, CTX: Originator)
2009-07-20 11:06:10.419951 [DEBUG] ozmod_isdn.c:728 zchan 8124e08 (1:25)
source isdn_data->channels_remote_crv[0x1e]
2009-07-20 11:06:10.419951 [DEBUG] ozmod_isdn.c:799 Received Release
Complete message for channel 0
2009-07-20 11:06:10.419951 [DEBUG] ozmod_isdn.c:804 Changing state on
1:25 from HANGUP to DOWN


:D

A known bug is the handling of incomming calls aiming for non
registered, but known targets. Currently caller isn't informed about
that and so its call stays open. Will try to fix that.

regards
Helmut

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (MingW32)

iD8DBQFKZDx94tZeNddg3dwRApjxAJ4tynu+xrzM3uMWlAhgnp2fdjmi0wCfZvgU
1wxVCgyskanESU0UxHQ4Ars=
=4xqu
-----END PGP SIGNATURE-----



More information about the FreeSWITCH-users mailing list