[Freeswitch-users] mod_managed failing to load on CentOS 5.2

Thu Jan 15 15:17:41 PST 2009

I changed the filename of the dll to FreeSWITCH.Managed.dll then tried to restart.  FS now no longer starts.  Says mono error.... with a dump.  I don't have the exact message because I am not on location with the machine.  I know it does compile, load and execute on a windows machine.  Just not on Centos.

> From: freeswitch-users-request at lists.freeswitch.org> Subject: Freeswitch-users Digest, Vol 31, Issue 77> To: freeswitch-users at lists.freeswitch.org> Date: Thu, 15 Jan 2009 00:20:53 -0800> > Send Freeswitch-users mailing list submissions to> freeswitch-users at lists.freeswitch.org> > To subscribe or unsubscribe via the World Wide Web, visit> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> or, via email, send a message with subject or body 'help' to> freeswitch-users-request at lists.freeswitch.org> > You can reach the person managing the list at> freeswitch-users-owner at lists.freeswitch.org> > When replying, please edit your Subject line so it is more specific> than "Re: Contents of Freeswitch-users digest..."> > > Today's Topics:> > 1. mod_managed failing to load on CentOS 5.2 (Tim B)> 2. Re: Using mod_managed Linux/Mono 2.02 (Michael Giagnocavo)> 3. zapata.conf immediate=yes in Asterisk - Freeswitch> equivalent? (Scott Ellis)> 4. Country specific tones - how to contribute? (Scott Ellis)> 5. Re: Country specific tones - how to contribute? (Jason White)> 6. Changes in PlayAndGetDigits (Juan Backson)> 7. Re: OpenZAP parse error [-3012] [Q931E_INVALID_CRV] (Peter P GMX)> > > ----------------------------------------------------------------------> > Message: 1> Date: Wed, 14 Jan 2009 20:13:27 -0500> From: Tim B <timb0311 at hotmail.com>> Subject: [Freeswitch-users] mod_managed failing to load on CentOS 5.2> To: <freeswitch-users at lists.freeswitch.org>> Message-ID: <BAY117-W5065D9F4AAF59BB1B86359DED70 at phx.gbl>> Content-Type: text/plain; charset="windows-1252"> > > Got mod_managed compiled and installed. Now it isn't loading. See below...> > > 1) Donwloaded fresh from SVN> > 2) Compiled... and installed.. OK> [root at phone2 mod_managed]# export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig> [root at phone2 mod_managed]# make> [root at phone2 mod_managed]# make install> > 3) Added to modules.conf.xml :> <load module="mod_managed"/>> > 4) Started freeswitch from command line ... Error:> 2009-01-14 20:01:42 [ERR] mod_managed.cpp:220 loadRuntime() mono_domain_assembly_open failed.> 2009-01-14 20:01:42 [CRIT] switch_loadable_module.c:839 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_managed.so> **Module load routine returned an error**> > 5) I know mono2 is working because I compiled and executed a helloworld test class on machine.> > Any ideas?> > > > _________________________________________________________________> Windows Live?: Keep your life in sync. > http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t1_allup_howitworks_012009> -------------- next part --------------> An HTML attachment was scrubbed...> URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090114/6a5facdc/attachment-0001.html > > ------------------------------> > Message: 2> Date: Thu, 15 Jan 2009 00:34:20 -0500> From: Michael Giagnocavo <mgg at giagnocavo.net>> Subject: Re: [Freeswitch-users] Using mod_managed Linux/Mono 2.02> To: "freeswitch-users at lists.freeswitch.org"> <freeswitch-users at lists.freeswitch.org>> Message-ID:> <6E8D2069C08AA84A83D336E996AE4C670235BBB97F at mse17be1.mse17.exchange.ms>> > Content-Type: text/plain; charset="us-ascii"> > The managed assembly should be the same on both platforms. The correct name is FreeSWITCH.Managed.dll. I'll get a patch to the mod_managed/managed/Makefile.> > Meanwhile, simply renaming mod_managed_lib.dll should work.> > After that, make sure there's a "managed" subdirectory where the modules are.> > -Michael> > > From: freeswitch-users-bounces at lists.freeswitch.org [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Adam Long> Sent: Wednesday, January 14, 2009 3:45 PM> To: freeswitch-users at lists.freeswitch.org> Subject: [Freeswitch-users] Using mod_managed Linux/Mono 2.02> > Has anyone had any luck using mod_managed under linux with mono yet?> The Wiki looks to still be lacking some linux installation instructions.> I feel like I'm close but missing something simple.> > I got as far as adding "languages/mod_managed" to the /usr/src/freeswitch-1.0.2/modules.conf without quotes obviously.> > My installed mono version is> [root at sipcore-alpha mod]# mono -V> Mono JIT compiler version 2.2 (tarball Wed Jan 14 09:44:57 PST 2009)> Copyright (C) 2002-2008 Novell, Inc and Contributors. www.mono-project.com> TLS: __thread> GC: Included Boehm (with typed GC)> SIGSEGV: altstack> Notifications: epoll> Architecture: x86> Disabled: none> > I can successful compile freeswitch and it indeed compiles mod_managed.so> > I added <load module="mod_managed" />> to my /usr/local/freeswitch/conf/autoload_configs/modules.conf.xml> > I did also create the /usr/local/freeswitch/mod/managed directory as stated in the wiki as requirement.> > But when I start freeswitch I get the following in regards to the mod_managed loading...> > 2009-01-14 14:19:12 [INFO] mod_managed.cpp:309 mod_managed_load() Loading mod_managed (Common Language Infrastructure), Mono Version> 2009-01-14 14:19:12 [INFO] mod_managed.cpp:213 loadRuntime() Calling mono_assembly_loaded.> 2009-01-14 14:19:12 [INFO] mod_managed.cpp:217 loadRuntime() Calling mono_domain_assembly_open.> 2009-01-14 14:19:12 [ERR] mod_managed.cpp:220 loadRuntime() mono_domain_assembly_open failed.> 2009-01-14 14:19:12 [CRIT] switch_loadable_module.c:839 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_managed.so> **Module load routine returned an error**> > One thing I think I may be missing is a FreeSWITCH.Managed.dll (this exists on windows environment but doesn't seem to be compiled under linux)> I thought perhaps mod_managed_lib.dll was the linux equivalent but that exists and still no a no go.> > Any ideas would be very welcome? Thank you!> > > > Regards,> -Adam> > > > > -------------- next part --------------> An HTML attachment was scrubbed...> URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090115/73ac27e4/attachment-0001.html > > ------------------------------> > Message: 3> Date: Thu, 15 Jan 2009 17:50:30 +1100> From: Scott Ellis <scott.ellis at novatex.com.au>> Subject: [Freeswitch-users] zapata.conf immediate=yes in Asterisk -> Freeswitch equivalent?> To: "freeswitch-users at lists.freeswitch.org"> <freeswitch-users at lists.freeswitch.org>> Message-ID: <496EDCB6.4020802 at novatex.com.au>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed> > Searched the wiki and mailing lists as best I can, but with no luck.> > How do I get OpenZap to answer a call immediately? (I do not need caller id)> > Scott> > > > > > ------------------------------> > Message: 4> Date: Thu, 15 Jan 2009 18:16:13 +1100> From: Scott Ellis <scott.ellis at novatex.com.au>> Subject: [Freeswitch-users] Country specific tones - how to> contribute?> To: "freeswitch-users at lists.freeswitch.org"> <freeswitch-users at lists.freeswitch.org>> Message-ID: <496EE2BD.2050102 at novatex.com.au>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed> > I have tracked down a set of au tones from the mailing list, which I am > going to verify. How do I go about getting these added into the default > build so that they are available for all in future?> > I tried <action application="set" data="ringback=${au-ring}"/> and this > did not work - where does it try and load the ring tone from? I have > entries in the tones.conf file, but these do not seem to be used.> > Scott> > > > > > > ------------------------------> > Message: 5> Date: Thu, 15 Jan 2009 18:24:05 +1100> From: Jason White <jason at jasonjgw.net>> Subject: Re: [Freeswitch-users] Country specific tones - how to> contribute?> To: freeswitch-users at lists.freeswitch.org> Message-ID: <20090115072405.GA15789 at jdc.jasonjgw.net>> Content-Type: text/plain; charset=us-ascii> > Scott Ellis <scott.ellis at novatex.com.au> wrote:> > I have tracked down a set of au tones from the mailing list, which I am > > going to verify. How do I go about getting these added into the default > > build so that they are available for all in future?> > Maybe by posting a patch to the bug tracking system or the development list?> > > > I tried <action application="set" data="ringback=${au-ring}"/> and this > > did not work - where does it try and load the ring tone from? I have > > entries in the tones.conf file, but these do not seem to be used.> > us-ring and uk-ring are defined in vars.xml. Note that they are global> variables, referenced with the $${variable-name} syntax.> > There's an ITU document referred to on the wiki with the official definitions> of ringback and other tones for various countries.> > > > > ------------------------------> > Message: 6> Date: Thu, 15 Jan 2009 15:43:20 +0800> From: "Juan Backson" <juanbackson at gmail.com>> Subject: [Freeswitch-users] Changes in PlayAndGetDigits> To: freeswitch-users at lists.freeswitch.org> Message-ID:> <27c25bc40901142343l34a3e99ftecf0df971e8e32f6 at mail.gmail.com>> Content-Type: text/plain; charset=ISO-8859-1> > Hi,> > Is there a change in the playAndGetDigits api? In the old release,> 11102, my lua script is working but is not working in the latest> release.> The error I am getting is " Error in playAndGetDigits expected 10..10> args, got 9 ".> > Thanks,> JB> > > > ------------------------------> > Message: 7> Date: Thu, 15 Jan 2009 09:20:18 +0100> From: Peter P GMX <Prometheus001 at gmx.net>> Subject: Re: [Freeswitch-users] OpenZAP parse error [-3012]> [Q931E_INVALID_CRV]> To: freeswitch-users at lists.freeswitch.org> Message-ID: <496EF1C2.8020607 at gmx.net>> Content-Type: text/plain; charset=ISO-8859-1> > Hello Michael,> > how much $$ are we talking about? I need this issue to be solved quickly> and it's worth to spend some money.> > I've read the following post:> > http://www.mail-archive.com/freeswitch-users@lists.freeswitch.org/msg05792.html> and have the same symptom with "after hundreds of calls I start to get b> channels that are stuck in states like "TERMINATING" or "HANGUP""> > Best regards> Peter> > Michael Collins schrieb:> > I believe these are all symptoms of something that Stefan is working> > on: better Q931 timers. It's been on the todo list for some time but> > we've had absolutely NOBODY willing to pony up serious $$ to support> > OpenZAP development which means it is progressing at the speed of> > developers' free time.> >> > -MC> >> > On Wed, Jan 14, 2009 at 9:44 AM, Peter P GMX <Prometheus001 at gmx.net> wrote:> > > >> After a time I receive the following error when a call comes in on our> >> OpenZap span 2:> >> parse error [-3012] [Q931E_INVALID_CRV]> >>> >> Here's the log> >> 2009-01-14 13:14:11 [DEBUG] ozmod_isdn.c:320 zap_isdn_931_34() Yay I got> >> an event! Type:[4d] Size:[103] CRV: 23 (0x17, CTX: Originator)> >> 2009-01-14 13:14:11 [DEBUG] ozmod_isdn.c:352 zap_isdn_931_34() zchan 0> >> (-1:-1) source isdn_data->channels_remote_crv[0x17]> >> 2009-01-14 13:14:11 [CRIT] ozmod_isdn.c:446 zap_isdn_931_34() Received> >> Release with no matching channel 0> >> 2009-01-14 13:14:11 [DEBUG] ozmod_isdn.c:781 zap_isdn_921_23() 931 parse> >> error [-3012] [Q931E_INVALID_CRV]> >> 2009-01-14 13:14:15 [DEBUG] ozmod_isdn.c:777 zap_isdn_921_23() READ 5> >> --------------------------------------------------------------------------------> >>> >> When freeswitch is restarted or mod_openzap is reloaded, the error is> >> gone away.> >>> >> Any idea what this can be?> >>> >> Best regards> >> Peter> >>> >>> >> _______________________________________________> >> Freeswitch-users mailing list> >> Freeswitch-users at lists.freeswitch.org> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users> >> http://www.freeswitch.org> >>> >> > >> > _______________________________________________> > Freeswitch-users mailing list> > Freeswitch-users at lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users> > http://www.freeswitch.org> >> > > > > > ------------------------------> > _______________________________________________> Freeswitch-users mailing list> Freeswitch-users at lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org> > > End of Freeswitch-users Digest, Vol 31, Issue 77> ************************************************
_________________________________________________________________
Windows Live™: Keep your life in sync. 
http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t1_allup_explore_012009
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090115/6f0e5a94/attachment-0002.html 