[Freeswitch-users] No caller/called ID received (Wildcard X101P)

[Michael Jerris]

I noticed tonegroup=es.  What country are you in and do you know what  
method they use to do dtmf.  Most likely we need a small tweak to set  
the dtmf method for your country.

Mike

On Jan 14, 2009, at 9:05 AM, Anthony Minessale wrote:

>
> number => 1
>
> This value should be set to the DID of the FXO line.
> That way when a call hits FS it will go to that extension in the  
> dialplan.
> This is unrelated to callerid, it's the destination not the source.
>
> If the line has caller-id it will also be available when it's  
> collected after the 2nd ring.
>
>
>
> On Wed, Jan 14, 2009 at 5:54 AM, Tomás <tomasborrella at gmail.com>  
> wrote:
> Hi all,
>
> I'm a new FreeSwitch user and this is my first email to the list.
>
> I'm trying to configure my Home PBX with a Wildcard X101P  
> (configured as FXO) and I have a problem receiving the caller/called  
> ID from PSTN.
>
> This is the content of file "openzap.conf":
>
> [span zt]
> name => OpenZAP
> number => 1
> fxo-channel => 1
>
> And this is the content of file "openzap.conf.xml":
>
> <configuration name="openzap.conf" description="OpenZAP  
> Configuration">
>   <settings>
>     <param name="debug" value="0"/>
>   </settings>
>   <analog_spans>
>     <span id="1">
>       <param name="tonegroup" value="es"/>
>       <param name="digit-timeout" value="2000"/>
>       <param name="max-digits" value="11"/>
>       <param name="dialplan" value="XML"/>
>       <param name="context" value="default"/>
>       <param name="enable-callerid" value="true"/>
>     </span>
>   </analog_spans>
> </configuration>
>
> As you can see the param "enable-callerid" is set to "true", but  
> when I received and incoming call, FreeSwitch doesn't get neither  
> the caller number nor the called number (instead of my home number,  
> I receive a number 1, as can be seen on the following log of an  
> incoming call):
>
> 2009-01-14 20:43:12 [NOTICE] switch_channel.c:565  
> switch_channel_set_name() New Channel OpenZAP/1:1/1  [941d6234- 
> e273-11dd-bcdf-89190a30fe61]
> 2009-01-14 20:43:12 [INFO] mod_dialplan_xml.c:233 dialplan_hunt()  
> Processing OpenZAP->1  in context default
> 2009-01-14 20:43:12 [NOTICE] switch_ivr.c:1255  
> switch_ivr_session_transfer() Transfer OpenZAP/1:1/1  to  
> enum[1 at default]
> 2009-01-14 20:43:16 [INFO] switch_core_state_machine.c:122  
> switch_core_standard_on_routing() No Route, Aborting
> 2009-01-14 20:43:16 [NOTICE] switch_core_state_machine.c:123  
> switch_core_standard_on_routing() Hangup OpenZAP/1:1/1  [CS_ROUTING]  
> [NO_ROUTE_DESTINATION]
> 2009-01-14 20:43:16 [NOTICE] switch_core_session.c:960  
> switch_core_session_thread() Session 1 (OpenZAP/1:1/1 ) Ended
> 2009-01-14 20:43:16 [NOTICE] switch_core_session.c:962  
> switch_core_session_thread() Close Channel OpenZAP/1:1/1  [CS_HANGUP]
> 2009-01-14 20:43:23 [NOTICE] switch_channel.c:565  
> switch_channel_set_name() New Channel OpenZAP/1:1/1  [9af53280- 
> e273-11dd-bcdf-89190a30fe61]
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090114/e2eea3fc/attachment-0002.html