[Freeswitch-users] outbound call, new comer

[Kristian Kielhofner]

In West Philadelphia born and raised...

Voicepulse seems to be picky about number format.  Trying doing full
E.164 (+1).  Also, make sure your realm is correct.  What does a SIP
debug look like?

On 1/12/09, Will Smith <willbelair at yahoo.com> wrote:
>
>
> Hi,
> I am first time FS user, so it is a bit confused with all the setup. For inbound calls, I tried to add a voicepulse.xml in the sip_profiles/external with the following codes:
>
> <include>
>   <gateway name="voicepulse">
>     <param name="username" value="3334445555"/>
>     <param name="realm" value="my_sip_provider.com"/>
>     <param name="password" value="3334445555"/>
>     <param name="proxy" value="my_sip_provider.com"/>
>     <param name="expire-seconds" value="600"/>
>     <param name="register" value="true"/>
>   </gateway>
>   <gateway name="voicepulse-backup">
>     <param name="username" value="3334445555"/>
>     <param name="realm" value="my_sip_provider.com"/>
>     <param name="password" value="3334445555"/>
>     <param name="extension" value="3334445555"/>
>     <param name="proxy"  value="my_sip_provider.com"/>
>     <param name="expire-seconds" value="600"/>
>     <param name="register" value="true"/>
>   </gateway>
> </include>
>
> ------------
>  and in the conf/dialplan/default.xml file I added:
>
> <!-- Dial any 10 digit number (2223334444) or 1+10 number (12223334444) here -->
>    <extension name="Long Distance - voicepulse">
>     <condition field="destination_number" expression="^(1{0,1}\d{10})$">
>       <action application="set" data="effective_caller_id_number=12223334444"/>
>       <!-- If your provider does not provide ringback (180 or 183) you may simulate
>         ringback by uncommenting the following line. -->
>       <!-- action application="ringback" /-->
>       <action application="bridge" data="sofia/gateway/voicepulse/$1"/>
>      </condition>
>    </extension>
>
>
> ------------------
>
> For inbound, I added
>
> <extension name="Voicepulse">   <!-- your provider or any name you'd like to call it -->
>     <condition field="destination_number" expression="3334445555">  <!-- your DID for this gateway-->
>        <action application="transfer" data="1001 XML default"/>
>     </condition>
>    </extension>
>
> ----------
>
> And, if I dial 3334445555 from a softphone registered with my_sip_provider, I got the message to the voice mail of 1001 - the 1001 extension does not ring.
> And if from 1001, I dial some real number like 18188892345, I got the error: Invalid Gateway ... Cannot create outgoing channel of type [fosia] cause: [Invalid_number_format] ...
>
>
> Would someone please give me some help to set this up. I am a bit confused with these.
>
> Thank you
>
> _______________________________________________
>  Freeswitch-users mailing list
>  Freeswitch-users at lists.freeswitch.org
>  http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>  UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>  http://www.freeswitch.org
>
>



-- 
Kristian Kielhofner
http://blog.krisk.org
http://www.submityoursip.com
http://www.astlinux.org
http://www.star2star.com