[Freeswitch-users] Openzap doesn't work

[Michael S Collins]

This looks like a zaptel issue. Do we have any zaptel users familiar  
with this issue? If not you should probably check on the asterisk list  
for help. Once zaptel is working we can then see about getting openzap  
up.

-MC

Sent from my iPhone

On Jan 12, 2009, at 6:36 AM, "Franziska Röhler" <curly2009 at gmx.de>  
wrote:

> I use q931 too.
>
> openzap.conf.xml
>
> <configuration name="openzap.conf" description="OpenZAP  
> Configuration">
>  <settings>
>    <param name="debug" value="0"/>
>    <!--<param name="hold-music" value="$${moh_uri}"/>-->
>    <!--<param name="enable-analog-option" value="call-swap"/>-->
>    <!--<param name="enable-analog-option" value="3-way"/>-->
>  </settings>
>  <!-- one entry here per openzap span -->
>  <pri_spans>
>    <span id="1">
>      <param name="mode" value="user"/>
>      <param name="dialect" value="q931"/>
>      <param name="dialplan" value="XML"/>
>      <param name="context" value="default"/>
>    </span>
>  </pri_spans>
> </configuration>
>
> openzap.conf
>
> [span zt]
> name => OpenZap
> number => 1
> trunk_type => e1
> b-channel => 1-15, 17-31
> d-channel => 16
>
> cat /proc/zaptel/*
> Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER) HDB3/ 
> CCS/CRC4 RECOVERING
>
>           1 WCT1/0/1 Clear (In use) RED
>           2 WCT1/0/2 Clear (In use) RED
>           3 WCT1/0/3 Clear (In use) RED
>           4 WCT1/0/4 Clear (In use) RED
>           5 WCT1/0/5 Clear (In use) RED
>           6 WCT1/0/6 Clear (In use) RED
>           7 WCT1/0/7 Clear (In use) RED
>           8 WCT1/0/8 Clear (In use) RED
>           9 WCT1/0/9 Clear (In use) RED
>          10 WCT1/0/10 Clear (In use) RED
>          11 WCT1/0/11 Clear (In use) RED
>          12 WCT1/0/12 Clear (In use) RED
>          13 WCT1/0/13 Clear (In use) RED
>          14 WCT1/0/14 Clear (In use) RED
>          15 WCT1/0/15 Clear (In use) RED
>          16 WCT1/0/16 HDLCFCS (In use) RED
>          17 WCT1/0/17 Clear (In use) RED
>          18 WCT1/0/18 Clear (In use) RED
>          19 WCT1/0/19 Clear (In use) RED
>          20 WCT1/0/20 Clear (In use) RED
>          21 WCT1/0/21 Clear (In use) RED
>          22 WCT1/0/22 Clear (In use) RED
>          23 WCT1/0/23 Clear (In use) RED
>          24 WCT1/0/24 Clear (In use) RED
>          25 WCT1/0/25 Clear (In use) RED
>          26 WCT1/0/26 Clear (In use) RED
>          27 WCT1/0/27 Clear (In use) RD
>          28 WCT1/0/28 Clear (In use) RED
>          29 WCT1/0/29 Clear (In use) RED
>          30 WCT1/0/30 Clear (In use) RED
>          31 WCT1/0/31 Clear (In use) RED
>
> Why is it RED? zttool shows no alarms (ok) and ztfcg -vv shows that  
> 31 Channels to configure.
>
>
>
>> I had the same problem a while ago with German PRI lines (S2M).
>>
>> Do you have
>> <param name="dialect" value="q931"/>
>> in your
>> openzap.conf.xml?
>>
>> In older Versions of openzap I used euro, in newer releases this  
>> didn't
>> work any more, so I used q931.
>>
>> If this is not successfull,
>>
>> can you post your openzap.conf.xml and openzap.xml
>> and the output of cat /proc/zaptel/*
>>
>> Best regards
>> Peter
>>
>> curly2009 at gmx.de schrieb:
>>> Hello,
>>>
>>> I'm a newbie in FS.
>>>
>>> I installed and configure Openzap and Zaptel. I have a PRI Digium
>> Wildcard TE110P.
>>>
>>> When I call a number then I get an Error!
>>>
>>> 2009-01-12 10:20:01 [CRIT] zap_io.c:804 zap_channel_open_any() All
>> circuits are busy.
>>> 2009-01-12 10:20:01 [ERR] mod_openzap.c:910  
>>> channel_outgoing_channel()
>> No channels available
>>> 2009-01-12 10:20:01 [ERR] switch_ivr_originate.c:926
>> switch_ivr_originate() Cannot create outgoing channel of type  
>> [openzap] cause:
>> [DESTINATION_OUT_OF_ORDER]
>>>
>>> What's wrong? Do you need any configurations?
>>>
>>> Thanks!
>>> Best Regards, Curly
>>>
>>>
>>>
>>
>> _______________________________________________
>> Freeswitch-users mailing list
>> Freeswitch-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org