[Freeswitch-users] TDM400 FXO can dialout only once
Anthony Minessale
anthony.minessale at gmail.com
Sun Feb 1 10:54:59 PST 2009
the value is dB already -7dB
but for the detection section you do not specify anything but the list of
frequencies needed to detect.
detect-ring => 440,480
this means it needs to detect a 440+480 to know there is a dialtone, the
generate value has nothing to do with it.
openzap does not currently do busy detection to detect a hangup, but up in
freeswitch you can use the tone_detect app to do this.
On Sun, Feb 1, 2009 at 3:17 AM, Nandy Dagondon <gcd at i.ph> wrote:
> hi,
>
> i found a major one. this time i deliberately set the dialtone freq to US
> std on my PH definition. i expect FS wont dial at all. but to my surprise,
> the problem is gone!! i checked the log. it indicates successful detection
> of DIALTONE.
>
> going on further. i noticed FXO wont hangup on busy tone.
>
> one possibility is the volume settings. the default is -7. how many dBm is
> this? and what is the dB equivalent per increment?
>
> tks n rgds,
> nandy
>
>
> On Sun, Feb 1, 2009 at 4:30 PM, Nandy Dagondon <gcd at i.ph> wrote:
>
>> hi everybody,
>>
>> i created [ph] tone definition per raul's suggestion and changed
>> /etc/zaptel.conf entries to:
>> tonezone=ph
>> defaultzone=ph
>>
>> but it didn't solve the problem.
>> i captured the console log during start-up and shutdown. i noticed openzap
>> related errors during shutdown. here's the snippet of the log:
>>
>> STARTUP
>> ---------------
>> 2009-02-01 15:58:10 [NOTICE] zap_io.c:2517 zap_global_init() Modules
>> configured: 1
>> 2009-02-01 15:58:10 [INFO] zap_io.c:2341 zap_load_module() Loading IO from
>> /opt/freeswitch/mod/ozmod_zt.so
>> 2009-02-01 15:58:10 [INFO] zap_io.c:2127 load_config() auto-loaded 'zt'
>> 2009-02-01 15:58:10 [INFO] ozmod_zt.c:186 zt_open_range() configuring
>> device /dev/zap/channel channel 1 as OpenZAP device 1:1 fd:39
>> 2009-02-01 15:58:10 [INFO] ozmod_zt.c:186 zt_open_range() configuring
>> device /dev/zap/channel channel 2 as OpenZAP device 2:1 fd:40
>> 2009-02-01 15:58:10 [INFO] zap_io.c:2265 load_config() Configured 2
>> channel(s)
>> 2009-02-01 15:58:10 [INFO] zap_io.c:2358 zap_load_module() Loading SIG
>> from /opt/freeswitch/mod/ozmod_analog.so
>> 2009-02-01 15:58:10 [INFO] zap_io.c:2474 zap_configure_span() auto-loaded
>> 'analog'
>> 2009-02-01 15:58:10 [CONSOLE] switch_loadable_module.c:857
>> switch_loadable_module_load_file() Successfully Loaded [mod_openzap]
>>
>> --- DIDN'T MAKE ANY CALL ---
>>
>> SHUTDOWN
>> ------------------
>> 2009-02-01 15:59:07 [NOTICE] switch_loadable_module.c:536
>> switch_loadable_module_unprocess() Deleting API Function 'oz'
>> 2009-02-01 15:59:07 [CONSOLE] switch_loadable_module.c:1231 do_shutdown()
>> Stopping: mod_openzap
>> 2009-02-01 15:59:07 [INFO] zap_io.c:256 zap_channel_destroy() Closing
>> channel zt:1:1 fd:39
>> 2009-02-01 15:59:07 [INFO] zap_io.c:256 zap_channel_destroy() Closing
>> channel zt:2:1 fd:40
>> 2009-02-01 15:59:08 [ERR] ozmod_analog.c:899 zap_analog_run() Failure
>> Polling event! [no matching descriptor]
>> 2009-02-01 15:59:08 [ERR] ozmod_analog.c:899 zap_analog_run() Failure
>> Polling event! [no matching descriptor]
>> 2009-02-01 15:59:08 [INFO] zap_io.c:2456 zap_unload_modules() Unloading
>> /opt/freeswitch/mod/ozmod_analog.so
>> 2009-02-01 15:59:08 [INFO] zap_io.c:2441 zap_unload_modules() Unloading IO
>> zt
>> 2009-02-01 15:59:08 [INFO] zap_io.c:2456 zap_unload_modules() Unloading
>> /opt/freeswitch/mod/ozmod_zt.so
>>
>> i also notice the same ERR flag during shutdown after making test calls.
>>
>> any suggestion what to do next?
>>
>> tks for your assistance.
>>
>> rgds,
>> -nandy
>>
>>
>> On Tue, Jan 27, 2009 at 8:39 AM, Nandy Dagondon <gcd at i.ph> wrote:
>>
>>> i tested the SVN trunk version. still the same behaviour.
>>> -nandy
>>>
>>>
>>> On Tue, Jan 27, 2009 at 12:33 AM, Anthony Minessale <
>>> anthony.minessale at gmail.com> wrote:
>>>
>>>> The unhanded type message just means that mod_openzap does not do
>>>> anything with the TONE_DETECTED event that was passed
>>>> up from the ozmod_analog.
>>>>
>>>> On Mon, Jan 26, 2009 at 7:32 AM, Nandy Dagondon <gcd at i.ph> wrote:
>>>>
>>>>> that's great. yes, i'm in the philippines. there's a difference in
>>>>> dialtone - it's 425 Hz.
>>>>> -nandy
>>>>>
>>>>>
>>>>>
>>>>> On Mon, Jan 26, 2009 at 6:01 PM, Michael Collins <msc at freeswitch.org>wrote:
>>>>>
>>>>>> I have a TDM400 clone and I will see if I can reproduce these
>>>>>> symptoms. BTW, are you in the Philippines? Is there any difference in
>>>>>> the dial tone there than in the US?
>>>>>> -MC
>>>>>>
>>>>>> On Sun, Jan 25, 2009 at 11:05 PM, Nandy Dagondon <gcd at i.ph> wrote:
>>>>>> > i monitored the line using another phone. there's indeed dialtone in
>>>>>> all
>>>>>> > attempts.
>>>>>> > i see TONE_DETECTED in the first call but i wonder there's a WARNING
>>>>>> message
>>>>>> > immediately following [WARNING] mod_openzap.c:1196 on_fxo_signal()
>>>>>> Unhandled
>>>>>> > type for channel 2:1.
>>>>>> > the dialtone freq should be okay since it's detected in the first
>>>>>> call.could
>>>>>> > the WARNING message gives us a hint of a possible problem other than
>>>>>> the
>>>>>> > dialtone freq?
>>>>>> >
>>>>>> > okay, i'll try the SVN version next.
>>>>>> >
>>>>>> >
>>>>>> > On Mon, Jan 26, 2009 at 10:18 AM, Anthony Minessale
>>>>>> > <anthony.minessale at gmail.com> wrote:
>>>>>> >>
>>>>>> >> Its not detecting a dial tone on the failure case.
>>>>>> >> Before dialing it waits until it picks up dialtone.
>>>>>> >> Try the svn trunk version to see if it works any better or verify
>>>>>> there is
>>>>>> >> a dialtone on the line.
>>>>>> >>
>>>>>> >> On Jan 25, 2009 6:19 PM, "Nandy Dagondon" <gcd at i.ph> wrote:
>>>>>> >>
>>>>>> >> hi everybody,
>>>>>> >>
>>>>>> >> i installed FS 1.0.2 to an Atom mobo (Intel D945GCLF2). it's
>>>>>> working using
>>>>>> >> IP phones, softphones and digium FXS port. but there's a problem in
>>>>>> dialing
>>>>>> >> out to PSTN using digium tdm400 fxo - it works fine on the first
>>>>>> attempt
>>>>>> >> (after starting FS) but it fails on the subsequent attempts. i
>>>>>> tested to
>>>>>> >> call using the FXS port and IP phone. same problem.
>>>>>> >>
>>>>>> >> before i place any call, i checked >oz dump 2 1 (show current
>>>>>> state =
>>>>>> >> DOWN, last state = DOWN)
>>>>>> >>
>>>>>> >> in the first call, there's this message:
>>>>>> >> [WARNING] mod_openzap.c:1196 on_fxo_signal() Unhandled type for
>>>>>> channel
>>>>>> >> 2:1
>>>>>> >> but
>>>>>> >>
>>>>>> >> then i hangup. checked >oz dump 21 (show current state=DOWN, last
>>>>>> >> state=HANGUP)
>>>>>> >>
>>>>>> >> in the 2nd (and subsequent) attempts, the fxo just goes off-hook
>>>>>> but
>>>>>> >> doesn't send the dtmf tones.
>>>>>> >> >oz dump 2 1 (shows current state = DIALING, last state = DOWN)
>>>>>> >>
>>>>>> >> has anyone encountered this problem before? i appreciate for any
>>>>>> help to
>>>>>> >> correct this problem.
>>>>>> >>
>>>>>> >> tks,
>>>>>> >> nandy
>>>>>> >>
>>>>>> >>
>>>>>> >> Environment:
>>>>>> >> ==================
>>>>>> >> kernel 2.6.18-92.1.22.el5
>>>>>> >> FS 1.0.2
>>>>>> >> zaptel 1.4.11
>>>>>> >> oslec
>>>>>> >> digium TDM400P Rev. I (1-FXS, 2-FXO,3-4 vacant)
>>>>>> >>
>>>>>> >> zaptel.conf
>>>>>> >> ========
>>>>>> >> loadzone = us
>>>>>> >> defaultzone=us
>>>>>> >> channels=1-2
>>>>>> >> alaw=1-4
>>>>>> >> fxsks=2
>>>>>> >> fxoks=1
>>>>>> >>
>>>>>> >>
>>>>>> >> openzap.conf.xml:
>>>>>> >> ===============
>>>>>> >> <configuration name="openzap.conf" description="OpenZAP
>>>>>> Configuration">
>>>>>> >> <settings>
>>>>>> >> <param name="debug" value="9"/>
>>>>>> >> <!-- <param name="hold-music" value="$${moh_uri}"/> -->
>>>>>> >> <!-- <param name="enable-analog-option" value="call-swap"/> -->
>>>>>> >> <!-- <param name="enable-analog-option" value="3-way"/> -->
>>>>>> >> </settings>
>>>>>> >> <!-- one entry here per openzap span -->
>>>>>> >> <analog_spans>
>>>>>> >> <span id="1">
>>>>>> >> <!--<param name="hold-music" value="$${moh_uri}"/>-->
>>>>>> >> <!--<param name="enable-analog-option" value="call-swap"/>-->
>>>>>> >> <!--<param name="enable-analog-option" value="3-way"/>-->
>>>>>> >> <param name="tonegroup" value="us"/>
>>>>>> >> <param name="digit-timeout" value="2000"/>
>>>>>> >> <param name="max-digits" value="15"/>
>>>>>> >> <param name="dialplan" value="XML"/>
>>>>>> >> <param name="context" value="default"/>
>>>>>> >> <param name="enable-callerid" value="false"/>
>>>>>> >> <!-- regex to stop dialing when it matches -->
>>>>>> >> <!--<param name="dial-regex" value="5555"/>-->
>>>>>> >> <!-- regex to stop dialing when it does not match -->
>>>>>> >> <!--<param name="fail-dial-regex" value="^5"/>-->
>>>>>> >> </span>
>>>>>> >> <span id="2">
>>>>>> >> <!--<param name="hold-music" value="$${moh_uri}"/>-->
>>>>>> >> <!--<param name="enable-analog-option" value="call-swap"/>-->
>>>>>> >> <!--<param name="enable-analog-option" value="3-way"/>-->
>>>>>> >> <param name="tonegroup" value="us"/>
>>>>>> >> <param name="digit-timeout" value="2000"/>
>>>>>> >> <param name="max-digits" value="11"/>
>>>>>> >> <param name="dialplan" value="XML"/>
>>>>>> >> <param name="context" value="default"/>
>>>>>> >> <param name="enable-callerid" value=""false/>
>>>>>> >> <!-- regex to stop dialing when it matches -->
>>>>>> >> <!--<param name="dial-regex" value="5555"/>-->
>>>>>> >> <!-- regex to stop dialing when it does not match -->
>>>>>> >> <!--<param name="fail-dial-regex" value="^5"/>-->
>>>>>> >> </span>
>>>>>> >> </analog_spans>
>>>>>> >> </configuration>
>>>>>> >>
>>>>>> >> openzap.conf
>>>>>> >> ==========
>>>>>> >> [span zt]
>>>>>> >> name => OpenZAP FXS
>>>>>> >> number => 1
>>>>>> >> fxs-channel => 1
>>>>>> >>
>>>>>> >> [span zt]
>>>>>> >> name => OpenZAP FXO
>>>>>> >> number => 2
>>>>>> >> fxo-channel => 2
>>>>>> >>
>>>>>> >> tones.conf (the dialtone and ring tone is set to Philipping tones)
>>>>>> >> ========
>>>>>> >> [us]
>>>>>> >> generate-dial => v=-7;%(1000,0,425)
>>>>>> >> detect-dial => 425
>>>>>> >>
>>>>>> >> generate-ring => v=-7;%(1000,4000,425,480)
>>>>>> >> detect-ring => 425,480
>>>>>> >>
>>>>>> >> generate-busy => v=-7;%(500,500,480,620)
>>>>>> >> detect-busy => 480,620
>>>>>> >>
>>>>>> >> generate-attn => v=0;%(200,300,1400,1800)
>>>>>> >> detect-attn => 1400,1800
>>>>>> >>
>>>>>> >> generate-callwaiting-sas => v=0;%(300,10000,440)
>>>>>> >> detect-callwaiting-sas => 440
>>>>>> >>
>>>>>> >> generate-callwaiting-cas => v=0;%(80,0,2750,2130)
>>>>>> >> detect-callwaiting-cas => 2750,2130
>>>>>> >>
>>>>>> >> detect-fail1 => 913.8
>>>>>> >> detect-fail2 => 1370.6
>>>>>> >> detect-fail3 => 776.7
>>>>>> >>
>>>>>> >> LOG OF FIRST CALL (OK)
>>>>>> >> ====================
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:152
>>>>>> >> switch_core_standard_on_execute() OpenZAP/1:1/93400534 Execute
>>>>>> >> bridge(openzap/2/1/3400534)
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] mod_openzap.c:340 tech_init() Set codec
>>>>>> PCMU
>>>>>> >> 20ms
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] mod_openzap.c:1017
>>>>>> channel_outgoing_channel()
>>>>>> >> Connect outbound channel OpenZAP/2:1/3400534
>>>>>> >> 2009-01-25 10:35:58 [NOTICE] switch_channel.c:565
>>>>>> >> switch_channel_set_name() New Channel OpenZAP/2:1/3400534
>>>>>> >> [e5f12114-ea88-11dd-9f5c-290fb4a527a4]
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] mod_openzap.c:1026
>>>>>> channel_outgoing_channel()
>>>>>> >> (OpenZAP/2:1/3400534) State Change CS_NEW -> CS_INIT
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] switch_core_session.c:807
>>>>>> >> switch_core_session_signal_state_change() Send signal
>>>>>> OpenZAP/2:1/3400534
>>>>>> >> [BREAK]
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] ozmod_analog.c:52
>>>>>> analog_fxo_outgoing_call()
>>>>>> >> Changing state on 2:1 from DOWN to DIALING
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] ozmod_analog.c:239
>>>>>> zap_analog_channel_run()
>>>>>> >> ANALOG CHANNEL thread starting.
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:379
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) Running State
>>>>>> Change CS_INIT
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] ozmod_analog.c:410
>>>>>> zap_analog_channel_run()
>>>>>> >> Executing state handler on 2:1 for DIALING
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:444
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State INIT
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] mod_openzap.c:364 channel_on_init()
>>>>>> >> (OpenZAP/2:1/3400534) State Change CS_INIT -> CS_ROUTING
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] switch_core_session.c:807
>>>>>> >> switch_core_session_signal_state_change() Send signal
>>>>>> OpenZAP/2:1/3400534
>>>>>> >> [BREAK]
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:444
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State INIT going to
>>>>>> sleep
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:379
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) Running State
>>>>>> Change
>>>>>> >> CS_ROUTING
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:447
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State ROUTING
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] mod_openzap.c:387 channel_on_routing()
>>>>>> >> OpenZAP/2:1/3400534 CHANNEL ROUTING
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] switch_ivr_originate.c:58
>>>>>> >> originate_on_routing() (OpenZAP/2:1/3400534) State Change
>>>>>> CS_ROUTING ->
>>>>>> >> CS_CONSUME_MEDIA
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] switch_core_session.c:807
>>>>>> >> switch_core_session_signal_state_change() Send signal
>>>>>> OpenZAP/2:1/3400534
>>>>>> >> [BREAK]
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:447
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State ROUTING going
>>>>>> to sleep
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:379
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) Running State
>>>>>> Change
>>>>>> >> CS_CONSUME_MEDIA
>>>>>> >> 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:466
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State CONSUME_MEDIA
>>>>>> >> 2009-01-25 10:35:59 [DEBUG] ozmod_analog.c:615
>>>>>> zap_analog_channel_run()
>>>>>> >> Detected tone DIAL on 2:1
>>>>>> >> 2009-01-25 10:35:59 [DEBUG] mod_openzap.c:1153 on_fxo_signal() got
>>>>>> FXO sig
>>>>>> >> 2:1 [TONE_DETECTED]
>>>>>> >> 2009-01-25 10:35:59 [WARNING] mod_openzap.c:1196 on_fxo_signal()
>>>>>> Unhandled
>>>>>> >> type for channel 2:1
>>>>>> >> 2009-01-25 10:35:59 [DEBUG] zap_io.c:1179
>>>>>> zchan_activate_dtmf_buffer()
>>>>>> >> Created DTMF Buffer!
>>>>>> >> 2009-01-25 10:35:59 [DEBUG] zap_io.c:1715 handle_dtmf() 2:1
>>>>>> GENERATE DTMF
>>>>>> >> [3400534]
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] ozmod_analog.c:302
>>>>>> zap_analog_channel_run()
>>>>>> >> Changing state on 2:1 from DIALING to UP
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] ozmod_analog.c:410
>>>>>> zap_analog_channel_run()
>>>>>> >> Executing state handler on 2:1 for UP
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] mod_openzap.c:1153 on_fxo_signal() got
>>>>>> FXO sig
>>>>>> >> 2:1 [UP]
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_channel.c:1710
>>>>>> >> switch_channel_perform_mark_answered() Send signal
>>>>>> OpenZAP/1:1/93400534
>>>>>> >> [BREAK]
>>>>>> >> 2009-01-25 10:36:03 [NOTICE] mod_openzap.c:1180 on_fxo_signal()
>>>>>> Channel
>>>>>> >> [OpenZAP/2:1/3400534] has been answered
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_channel.c:177
>>>>>> >> switch_channel_audio_sync() OpenZAP/2:1/3400534 receive message
>>>>>> [AUDIO_SYNC]
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_channel.c:1768
>>>>>> >> switch_channel_perform_answer() OpenZAP/1:1/93400534 receive
>>>>>> message
>>>>>> >> [ANSWER]
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] mod_openzap.c:813
>>>>>> >> channel_receive_message_fxs() Changing state on 1:1 from IDLE to UP
>>>>>> >> 2009-01-25 10:36:03 [NOTICE] mod_openzap.c:814
>>>>>> >> channel_receive_message_fxs() Channel [OpenZAP/1:1/93400534] has
>>>>>> been
>>>>>> >> answered
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_channel.c:177
>>>>>> >> switch_channel_audio_sync() OpenZAP/1:1/93400534 receive message
>>>>>> >> [AUDIO_SYNC]
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_core_session.c:511
>>>>>> >> switch_core_session_perform_receive_message() Send signal
>>>>>> >> OpenZAP/1:1/93400534 [BREAK]
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_ivr_originate.c:1627
>>>>>> >> switch_ivr_originate() Originate Resulted in Success:
>>>>>> [OpenZAP/2:1/3400534]
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_channel.c:177
>>>>>> >> switch_channel_audio_sync() OpenZAP/2:1/3400534 receive message
>>>>>> [AUDIO_SYNC]
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_channel.c:177
>>>>>> >> switch_channel_audio_sync() OpenZAP/1:1/93400534 receive message
>>>>>> >> [AUDIO_SYNC]
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_ivr_bridge.c:862
>>>>>> >> switch_ivr_multi_threaded_bridge() OpenZAP/2:1/3400534 receive
>>>>>> message
>>>>>> >> [BRIDGE]
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_core_session.c:511
>>>>>> >> switch_core_session_perform_receive_message() Send signal
>>>>>> >> OpenZAP/2:1/3400534 [BREAK]
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_ivr_bridge.c:869
>>>>>> >> switch_ivr_multi_threaded_bridge() OpenZAP/1:1/93400534 receive
>>>>>> message
>>>>>> >> [BRIDGE]
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_core_session.c:511
>>>>>> >> switch_core_session_perform_receive_message() Send signal
>>>>>> >> OpenZAP/1:1/93400534 [BREAK]
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_ivr_bridge.c:913
>>>>>> >> switch_ivr_multi_threaded_bridge() (OpenZAP/2:1/3400534) State
>>>>>> Change
>>>>>> >> CS_CONSUME_MEDIA -> CS_EXCHANGE_MEDIA
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_core_session.c:807
>>>>>> >> switch_core_session_signal_state_change() Send signal
>>>>>> OpenZAP/2:1/3400534
>>>>>> >> [BREAK]
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] ozmod_analog.c:410
>>>>>> zap_analog_channel_run()
>>>>>> >> Executing state handler on 1:1 for UP
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] mod_openzap.c:1212 on_fxs_signal() got
>>>>>> FXS sig
>>>>>> >> [UP]
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_core_state_machine.c:466
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State CONSUME_MEDIA
>>>>>> going to
>>>>>> >> sleep
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_core_state_machine.c:379
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) Running State
>>>>>> Change
>>>>>> >> CS_EXCHANGE_MEDIA
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] switch_core_state_machine.c:457
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State
>>>>>> EXCHANGE_MEDIA
>>>>>> >> 2009-01-25 10:36:03 [DEBUG] mod_openzap.c:511
>>>>>> channel_on_exchange_media()
>>>>>> >> CHANNEL EXCHANGE_MEDIA
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] ozmod_analog.c:744 process_event()
>>>>>> EVENT
>>>>>> >> [ONHOOK][1:1] STATE [UP]
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] ozmod_analog.c:780 process_event()
>>>>>> Changing
>>>>>> >> state on 1:1 from UP to DOWN
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] ozmod_analog.c:410
>>>>>> zap_analog_channel_run()
>>>>>> >> Executing state handler on 1:1 for DOWN
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] mod_openzap.c:1212 on_fxs_signal() got
>>>>>> FXS sig
>>>>>> >> [STOP]
>>>>>> >> 2009-01-25 10:36:16 [NOTICE] mod_openzap.c:1300 on_fxs_signal()
>>>>>> Hangup
>>>>>> >> OpenZAP/1:1/93400534 [CS_EXECUTE] [NORMAL_CLEARING]
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_channel.c:1494
>>>>>> >> switch_channel_perform_hangup() Send signal OpenZAP/1:1/93400534
>>>>>> [KILL]
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_core_session.c:807
>>>>>> >> switch_core_session_signal_state_change() Send signal
>>>>>> OpenZAP/1:1/93400534
>>>>>> >> [BREAK]
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] zap_io.c:1125 zap_channel_done()
>>>>>> channel done
>>>>>> >> 1:1
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] ozmod_analog.c:726
>>>>>> zap_analog_channel_run()
>>>>>> >> ANALOG CHANNEL 1:1 thread ended.
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_ivr_bridge.c:360
>>>>>> audio_bridge_thread()
>>>>>> >> OpenZAP/1:1/93400534 ending bridge by request from read function
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_ivr_bridge.c:435
>>>>>> audio_bridge_thread()
>>>>>> >> BRIDGE THREAD DONE [OpenZAP/1:1/93400534]
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_ivr_bridge.c:439
>>>>>> audio_bridge_thread()
>>>>>> >> Send signal OpenZAP/2:1/3400534 [BREAK]
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_ivr_bridge.c:354
>>>>>> audio_bridge_thread()
>>>>>> >> OpenZAP/1:1/93400534 ending bridge by request from write function
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_ivr_bridge.c:409
>>>>>> audio_bridge_thread()
>>>>>> >> OpenZAP/2:1/3400534 receive message [UNBRIDGE]
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_core_session.c:511
>>>>>> >> switch_core_session_perform_receive_message() Send signal
>>>>>> >> OpenZAP/2:1/3400534 [BREAK]
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_ivr_bridge.c:435
>>>>>> audio_bridge_thread()
>>>>>> >> BRIDGE THREAD DONE [OpenZAP/2:1/3400534]
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_ivr_bridge.c:439
>>>>>> audio_bridge_thread()
>>>>>> >> Send signal OpenZAP/1:1/93400534 [BREAK]
>>>>>> >> 2009-01-25 10:36:16 [NOTICE] switch_ivr_bridge.c:470
>>>>>> >> audio_bridge_on_exchange_media() Hangup OpenZAP/2:1/3400534
>>>>>> >> [CS_EXCHANGE_MEDIA] [NORMAL_CLEARING]
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_channel.c:1494
>>>>>> >> switch_channel_perform_hangup() Send signal OpenZAP/2:1/3400534
>>>>>> [KILL]
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_core_session.c:807
>>>>>> >> switch_core_session_signal_state_change() Send signal
>>>>>> OpenZAP/2:1/3400534
>>>>>> >> [BREAK]
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:457
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State
>>>>>> EXCHANGE_MEDIA going
>>>>>> >> to sleep
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:379
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) Running State
>>>>>> Change
>>>>>> >> CS_HANGUP
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:410
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State HANGUP
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] mod_openzap.c:429 channel_on_hangup()
>>>>>> Changing
>>>>>> >> state on 2:1 from UP to HANGUP
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] mod_openzap.c:472 channel_on_hangup()
>>>>>> >> OpenZAP/2:1/3400534 CHANNEL HANGUP
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:46
>>>>>> >> switch_core_standard_on_hangup() OpenZAP/2:1/3400534 Standard
>>>>>> HANGUP, cause:
>>>>>> >> NORMAL_CLEARING
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:410
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State HANGUP going
>>>>>> to sleep
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_core_session.c:939
>>>>>> >> switch_core_session_thread() Session 2 (OpenZAP/2:1/3400534)
>>>>>> Locked, Waiting
>>>>>> >> on external entities
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:454
>>>>>> >> switch_core_session_run() (OpenZAP/1:1/93400534) State EXECUTE
>>>>>> going to
>>>>>> >> sleep
>>>>>> >> 2009-01-25 10:36:16 [NOTICE] switch_core_session.c:957
>>>>>> >> switch_core_session_thread() Session 2 (OpenZAP/2:1/3400534) Ended
>>>>>> >> 2009-01-25 10:36:16 [NOTICE] switch_core_session.c:959
>>>>>> >> switch_core_session_thread() Close Channel OpenZAP/2:1/3400534
>>>>>> [CS_HANGUP]
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:379
>>>>>> >> switch_core_session_run() (OpenZAP/1:1/93400534) Running State
>>>>>> Change
>>>>>> >> CS_HANGUP
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:410
>>>>>> >> switch_core_session_run() (OpenZAP/1:1/93400534) State HANGUP
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] mod_openzap.c:472 channel_on_hangup()
>>>>>> >> OpenZAP/1:1/93400534 CHANNEL HANGUP
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:46
>>>>>> >> switch_core_standard_on_hangup() OpenZAP/1:1/93400534 Standard
>>>>>> HANGUP,
>>>>>> >> cause: NORMAL_CLEARING
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:410
>>>>>> >> switch_core_session_run() (OpenZAP/1:1/93400534) State HANGUP going
>>>>>> to sleep
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] switch_core_session.c:939
>>>>>> >> switch_core_session_thread() Session 1 (OpenZAP/1:1/93400534)
>>>>>> Locked,
>>>>>> >> Waiting on external entities
>>>>>> >> 2009-01-25 10:36:16 [NOTICE] switch_core_session.c:957
>>>>>> >> switch_core_session_thread() Session 1 (OpenZAP/1:1/93400534) Ended
>>>>>> >> 2009-01-25 10:36:16 [NOTICE] switch_core_session.c:959
>>>>>> >> switch_core_session_thread() Close Channel OpenZAP/1:1/93400534
>>>>>> [CS_HANGUP]
>>>>>> >> 2009-01-25 10:36:16 [DEBUG] ozmod_analog.c:410
>>>>>> zap_analog_channel_run()
>>>>>> >> Executing state handler on 2:1 for HANGUP
>>>>>> >> 2009-01-25 10:36:17 [DEBUG] ozmod_analog.c:351
>>>>>> zap_analog_channel_run()
>>>>>> >> Changing state on 2:1 from HANGUP to DOWN
>>>>>> >> 2009-01-25 10:36:17 [DEBUG] ozmod_analog.c:410
>>>>>> zap_analog_channel_run()
>>>>>> >> Executing state handler on 2:1 for DOWN
>>>>>> >> 2009-01-25 10:36:17 [DEBUG] mod_openzap.c:1153 on_fxo_signal() got
>>>>>> FXO sig
>>>>>> >> 2:1 [STOP]
>>>>>> >> 2009-01-25 10:36:17 [DEBUG] zap_io.c:1125 zap_channel_done()
>>>>>> channel done
>>>>>> >> 2:1
>>>>>> >> 2009-01-25 10:36:17 [DEBUG] ozmod_analog.c:726
>>>>>> zap_analog_channel_run()
>>>>>> >> ANALOG CHANNEL 2:1 thread ended.
>>>>>> >>
>>>>>> >> LOG OF FAILED CALLS
>>>>>> >> ==================
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:152
>>>>>> >> switch_core_standard_on_execute() OpenZAP/1:1/93400534 Execute
>>>>>> >> bridge(openzap/2/1/3400534)
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] mod_openzap.c:340 tech_init() Set codec
>>>>>> PCMU
>>>>>> >> 20ms
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] mod_openzap.c:1017
>>>>>> channel_outgoing_channel()
>>>>>> >> Connect outbound channel OpenZAP/2:1/3400534
>>>>>> >> 2009-01-25 10:36:55 [NOTICE] switch_channel.c:565
>>>>>> >> switch_channel_set_name() New Channel OpenZAP/2:1/3400534
>>>>>> >> [079f5420-ea89-11dd-9f5c-290fb4a527a4]
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] mod_openzap.c:1026
>>>>>> channel_outgoing_channel()
>>>>>> >> (OpenZAP/2:1/3400534) State Change CS_NEW -> CS_INIT
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] switch_core_session.c:807
>>>>>> >> switch_core_session_signal_state_change() Send signal
>>>>>> OpenZAP/2:1/3400534
>>>>>> >> [BREAK]
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] ozmod_analog.c:52
>>>>>> analog_fxo_outgoing_call()
>>>>>> >> Changing state on 2:1 from DOWN to DIALING
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] ozmod_analog.c:239
>>>>>> zap_analog_channel_run()
>>>>>> >> ANALOG CHANNEL thread starting.
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:379
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) Running State
>>>>>> Change CS_INIT
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] ozmod_analog.c:410
>>>>>> zap_analog_channel_run()
>>>>>> >> Executing state handler on 2:1 for DIALING
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:444
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State INIT
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] mod_openzap.c:364 channel_on_init()
>>>>>> >> (OpenZAP/2:1/3400534) State Change CS_INIT -> CS_ROUTING
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] switch_core_session.c:807
>>>>>> >> switch_core_session_signal_state_change() Send signal
>>>>>> OpenZAP/2:1/3400534
>>>>>> >> [BREAK]
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:444
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State INIT going to
>>>>>> sleep
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:379
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) Running State
>>>>>> Change
>>>>>> >> CS_ROUTING
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:447
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State ROUTING
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] mod_openzap.c:387 channel_on_routing()
>>>>>> >> OpenZAP/2:1/3400534 CHANNEL ROUTING
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] switch_ivr_originate.c:58
>>>>>> >> originate_on_routing() (OpenZAP/2:1/3400534) State Change
>>>>>> CS_ROUTING ->
>>>>>> >> CS_CONSUME_MEDIA
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] switch_core_session.c:807
>>>>>> >> switch_core_session_signal_state_change() Send signal
>>>>>> OpenZAP/2:1/3400534
>>>>>> >> [BREAK]
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:447
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State ROUTING going
>>>>>> to sleep
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:379
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) Running State
>>>>>> Change
>>>>>> >> CS_CONSUME_MEDIA
>>>>>> >> 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:466
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State CONSUME_MEDIA
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] ozmod_analog.c:744 process_event()
>>>>>> EVENT
>>>>>> >> [ONHOOK][1:1] STATE [IDLE]
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] ozmod_analog.c:780 process_event()
>>>>>> Changing
>>>>>> >> state on 1:1 from IDLE to DOWN
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] ozmod_analog.c:410
>>>>>> zap_analog_channel_run()
>>>>>> >> Executing state handler on 1:1 for DOWN
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] mod_openzap.c:1212 on_fxs_signal() got
>>>>>> FXS sig
>>>>>> >> [STOP]
>>>>>> >> 2009-01-25 10:37:08 [NOTICE] mod_openzap.c:1300 on_fxs_signal()
>>>>>> Hangup
>>>>>> >> OpenZAP/1:1/93400534 [CS_EXECUTE] [NORMAL_CLEARING]
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_channel.c:1494
>>>>>> >> switch_channel_perform_hangup() Send signal OpenZAP/1:1/93400534
>>>>>> [KILL]
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_core_session.c:807
>>>>>> >> switch_core_session_signal_state_change() Send signal
>>>>>> OpenZAP/1:1/93400534
>>>>>> >> [BREAK]
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] zap_io.c:1125 zap_channel_done()
>>>>>> channel done
>>>>>> >> 1:1
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] ozmod_analog.c:726
>>>>>> zap_analog_channel_run()
>>>>>> >> ANALOG CHANNEL 1:1 thread ended.
>>>>>> >> 2009-01-25 10:37:08 [NOTICE] switch_ivr_originate.c:1566
>>>>>> >> switch_ivr_originate() Hangup OpenZAP/2:1/3400534
>>>>>> [CS_CONSUME_MEDIA]
>>>>>> >> [ORIGINATOR_CANCEL]
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_channel.c:1494
>>>>>> >> switch_channel_perform_hangup() Send signal OpenZAP/2:1/3400534
>>>>>> [KILL]
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_core_session.c:807
>>>>>> >> switch_core_session_signal_state_change() Send signal
>>>>>> OpenZAP/2:1/3400534
>>>>>> >> [BREAK]
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_ivr_originate.c:1691
>>>>>> >> switch_ivr_originate() Originate Cancelled by originator
>>>>>> termination Cause:
>>>>>> >> 487 [ORIGINATOR_CANCEL]
>>>>>> >> 2009-01-25 10:37:08 [INFO] mod_dptools.c:1909
>>>>>> audio_bridge_function()
>>>>>> >> Originate Failed. Cause: ORIGINATOR_CANCEL
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:454
>>>>>> >> switch_core_session_run() (OpenZAP/1:1/93400534) State EXECUTE
>>>>>> going to
>>>>>> >> sleep
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:379
>>>>>> >> switch_core_session_run() (OpenZAP/1:1/93400534) Running State
>>>>>> Change
>>>>>> >> CS_HANGUP
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:410
>>>>>> >> switch_core_session_run() (OpenZAP/1:1/93400534) State HANGUP
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] mod_openzap.c:472 channel_on_hangup()
>>>>>> >> OpenZAP/1:1/93400534 CHANNEL HANGUP
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:46
>>>>>> >> switch_core_standard_on_hangup() OpenZAP/1:1/93400534 Standard
>>>>>> HANGUP,
>>>>>> >> cause: NORMAL_CLEARING
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:410
>>>>>> >> switch_core_session_run() (OpenZAP/1:1/93400534) State HANGUP going
>>>>>> to sleep
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_core_session.c:939
>>>>>> >> switch_core_session_thread() Session 3 (OpenZAP/1:1/93400534)
>>>>>> Locked,
>>>>>> >> Waiting on external entities
>>>>>> >> 2009-01-25 10:37:08 [NOTICE] switch_core_session.c:957
>>>>>> >> switch_core_session_thread() Session 3 (OpenZAP/1:1/93400534) Ended
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:466
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State CONSUME_MEDIA
>>>>>> going to
>>>>>> >> sleep
>>>>>> >> 2009-01-25 10:37:08 [NOTICE] switch_core_session.c:959
>>>>>> >> switch_core_session_thread() Close Channel OpenZAP/1:1/93400534
>>>>>> [CS_HANGUP]
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:379
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) Running State
>>>>>> Change
>>>>>> >> CS_HANGUP
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:410
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State HANGUP
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] mod_openzap.c:429 channel_on_hangup()
>>>>>> Changing
>>>>>> >> state on 2:1 from DIALING to HANGUP
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] mod_openzap.c:472 channel_on_hangup()
>>>>>> >> OpenZAP/2:1/3400534 CHANNEL HANGUP
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:46
>>>>>> >> switch_core_standard_on_hangup() OpenZAP/2:1/3400534 Standard
>>>>>> HANGUP, cause:
>>>>>> >> ORIGINATOR_CANCEL
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:410
>>>>>> >> switch_core_session_run() (OpenZAP/2:1/3400534) State HANGUP going
>>>>>> to sleep
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] switch_core_session.c:939
>>>>>> >> switch_core_session_thread() Session 4 (OpenZAP/2:1/3400534)
>>>>>> Locked, Waiting
>>>>>> >> on external entities
>>>>>> >> 2009-01-25 10:37:08 [NOTICE] switch_core_session.c:957
>>>>>> >> switch_core_session_thread() Session 4 (OpenZAP/2:1/3400534) Ended
>>>>>> >> 2009-01-25 10:37:08 [NOTICE] switch_core_session.c:959
>>>>>> >> switch_core_session_thread() Close Channel OpenZAP/2:1/3400534
>>>>>> [CS_HANGUP]
>>>>>> >> 2009-01-25 10:37:08 [DEBUG] ozmod_analog.c:410
>>>>>> zap_analog_channel_run()
>>>>>> >> Executing state handler on 2:1 for HANGUP
>>>>>> >> 2009-01-25 10:37:09 [DEBUG] ozmod_analog.c:351
>>>>>> zap_analog_channel_run()
>>>>>> >> Changing state on 2:1 from HANGUP to DOWN
>>>>>> >> 2009-01-25 10:37:09 [DEBUG] ozmod_analog.c:410
>>>>>> zap_analog_channel_run()
>>>>>> >> Executing state handler on 2:1 for DOWN
>>>>>> >> 2009-01-25 10:37:09 [DEBUG] mod_openzap.c:1153 on_fxo_signal() got
>>>>>> FXO sig
>>>>>> >> 2:1 [STOP]
>>>>>> >> 2009-01-25 10:37:09 [DEBUG] zap_io.c:1125 zap_channel_done()
>>>>>> channel done
>>>>>> >> 2:1
>>>>>> >> 2009-01-25 10:37:09 [DEBUG] ozmod_analog.c:726
>>>>>> zap_analog_channel_run()
>>>>>> >> ANALOG CHANNEL 2:1 thread ended.
>>>>>> >>
>>>>>> >>
>>>>>> >>
>>>>>> >>
>>>>>> >>
>>>>>> >>
>>>>>> >> _______________________________________________
>>>>>> >> Freeswitch-users mailing list
>>>>>> >> Freeswitch-users at lists.freeswitch.org
>>>>>> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>> >> UNSUBSCRIBE:
>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>>> >> http://www.freeswitch.org
>>>>>> >>
>>>>>> >>
>>>>>> >> _______________________________________________
>>>>>> >> Freeswitch-users mailing list
>>>>>> >> Freeswitch-users at lists.freeswitch.org
>>>>>> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>> >> UNSUBSCRIBE:
>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>>> >> http://www.freeswitch.org
>>>>>> >>
>>>>>> >
>>>>>> >
>>>>>> > _______________________________________________
>>>>>> > Freeswitch-users mailing list
>>>>>> > Freeswitch-users at lists.freeswitch.org
>>>>>> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>> > UNSUBSCRIBE:
>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>>> > http://www.freeswitch.org
>>>>>> >
>>>>>> >
>>>>>>
>>>>>> _______________________________________________
>>>>>> Freeswitch-users mailing list
>>>>>> Freeswitch-users at lists.freeswitch.org
>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>> UNSUBSCRIBE:
>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>>> http://www.freeswitch.org
>>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Freeswitch-users mailing list
>>>>> Freeswitch-users at lists.freeswitch.org
>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>> UNSUBSCRIBE:
>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>> http://www.freeswitch.org
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Anthony Minessale II
>>>>
>>>> FreeSWITCH http://www.freeswitch.org/
>>>> ClueCon http://www.cluecon.com/
>>>>
>>>> AIM: anthm
>>>> MSN:anthony_minessale at hotmail.com <MSN%3Aanthony_minessale at hotmail.com>
>>>> GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com<PAYPAL%3Aanthony.minessale at gmail.com>
>>>> IRC: irc.freenode.net #freeswitch
>>>>
>>>> FreeSWITCH Developer Conference
>>>> sip:888 at conference.freeswitch.org <sip%3A888 at conference.freeswitch.org>
>>>> iax:guest at conference.freeswitch.org/888
>>>> googletalk:conf+888 at conference.freeswitch.org<googletalk%3Aconf%2B888 at conference.freeswitch.org>
>>>> pstn:213-799-1400
>>>>
>>>> _______________________________________________
>>>> Freeswitch-users mailing list
>>>> Freeswitch-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:
>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>> http://www.freeswitch.org
>>>>
>>>>
>>>
>>
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
--
Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
AIM: anthm
MSN:anthony_minessale at hotmail.com <MSN%3Aanthony_minessale at hotmail.com>
GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com<PAYPAL%3Aanthony.minessale at gmail.com>
IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference
sip:888 at conference.freeswitch.org <sip%3A888 at conference.freeswitch.org>
iax:guest at conference.freeswitch.org/888
googletalk:conf+888 at conference.freeswitch.org<googletalk%3Aconf%2B888 at conference.freeswitch.org>
pstn:213-799-1400
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090201/e94b380d/attachment-0001.html
More information about the Freeswitch-users
mailing list