[Freeswitch-users] continue_on_fail

[Nandy Dagondon]

this action can be accomplished using Group Dialing (Sequential). this may
not answer your problem but have you considered it?
-nandy


On Tue, Dec 8, 2009 at 2:31 AM, Peter P GMX <Prometheus001 at gmx.net> wrote:

> I have a Problem with continue_on_fail.
>
>
> I have setup a hunt group
> <action application="set" data="continue_on_fail=NO_ANSWER,USER_BUSY"/>
> <action application="bridge"
> data="sofia/external/219 at 10.11.12.243,sofia/external/223 at 10.11.12.234
> ,sofia/external/236 at 10.11.12.188,sofia/external/101 at 10.11.12.245"/>
> <action application="bridge" data= (dialstring for fallback user )
>
> I want the fallback user to be called whenever none of the previously
> called 3 gateway numbers picks up or if they are all busy.
> Therefore continue_on_fail=NO_ANSWER,USER_BUSY
>
> The fallback user is called, however if any of the previously called
> gateways picks up and then hangs up, the fallback user is called
> afterwards.
> Means: The fallback user is always called.
>
> I had expected, that continue_on_fail=NO_ANSWER,USER_BUSY would not fire
> the next bridge if it gets a NORMAL_CLEARING.
>
> Am I thinking wrongly about this?
>
> I have added
>    <action application="set" data="hangup_after_bridge=true"/>
> and this works, but I would like to specify more in detail the
> conditions when to follow the next hunt group entry.
>
> Best regards
> Peter
>
>
>
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20091209/9a7a9515/attachment-0002.html