[Freeswitch-users] errors installing wanpipe drivers

Neil Patel neilp at cs.stanford.edu
Thu Dec 3 22:36:04 PST 2009


Thanks all for your help. I got around this by running ./Setup and
installing wanpipe in TDM API mode (it says it's the default for FS). I then
uncommented the mod_openzap line in modules.conf when installing FS. Finally
I ran wancfg_fs which creates appropriate config files for you for your FS
installation. I believe openzap is now installed properly:

2009-12-04 12:04:52.411017 [INFO] zap_io.c:2451 Loading IO from
/usr/local/freeswitch/mod/ozmod_wanpipe.so [wanpipe]
2009-12-04 12:04:52.411126 [INFO] zap_io.c:2251 auto-loaded 'wanpipe'
2009-12-04 12:04:52.411311 [INFO] ozmod_wanpipe.c:287 configuring device
s1c1 as OpenZAP device 1:1 fd:14 DTMF: software
2009-12-04 12:04:52.411377 [INFO] ozmod_wanpipe.c:287 configuring device
s1c2 as OpenZAP device 1:2 fd:15 DTMF: software
2009-12-04 12:04:52.411444 [INFO] ozmod_wanpipe.c:287 configuring device
s1c3 as OpenZAP device 1:3 fd:17 DTMF: software
2009-12-04 12:04:52.411509 [INFO] ozmod_wanpipe.c:287 configuring device
s1c4 as OpenZAP device 1:4 fd:18 DTMF: software
2009-12-04 12:04:52.411575 [INFO] ozmod_wanpipe.c:287 configuring device
s1c5 as OpenZAP device 1:5 fd:19 DTMF: software
2009-12-04 12:04:52.411639 [INFO] ozmod_wanpipe.c:287 configuring device
s1c6 as OpenZAP device 1:6 fd:20 DTMF: software
2009-12-04 12:04:52.411707 [INFO] ozmod_wanpipe.c:287 configuring device
s1c7 as OpenZAP device 1:7 fd:21 DTMF: software
2009-12-04 12:04:52.411771 [INFO] ozmod_wanpipe.c:287 configuring device
s1c8 as OpenZAP device 1:8 fd:22 DTMF: software
2009-12-04 12:04:52.411837 [INFO] ozmod_wanpipe.c:287 configuring device
s1c9 as OpenZAP device 1:9 fd:23 DTMF: software
2009-12-04 12:04:52.411903 [INFO] ozmod_wanpipe.c:287 configuring device
s1c10 as OpenZAP device 1:10 fd:24 DTMF: software
2009-12-04 12:04:52.411969 [INFO] ozmod_wanpipe.c:287 configuring device
s1c11 as OpenZAP device 1:11 fd:25 DTMF: software
2009-12-04 12:04:52.412034 [INFO] ozmod_wanpipe.c:287 configuring device
s1c12 as OpenZAP device 1:12 fd:26 DTMF: software
2009-12-04 12:04:52.412102 [INFO] ozmod_wanpipe.c:287 configuring device
s1c13 as OpenZAP device 1:13 fd:27 DTMF: software
2009-12-04 12:04:52.412179 [INFO] ozmod_wanpipe.c:287 configuring device
s1c14 as OpenZAP device 1:14 fd:28 DTMF: software
2009-12-04 12:04:52.412244 [INFO] ozmod_wanpipe.c:287 configuring device
s1c15 as OpenZAP device 1:15 fd:29 DTMF: software
TDM API: CMD: 18
: Operation not supported
2009-12-04 12:04:52.412416 [INFO] ozmod_wanpipe.c:287 configuring device
s1c16 as OpenZAP device 1:16 fd:30 DTMF: none
2009-12-04 12:04:52.412503 [INFO] ozmod_wanpipe.c:287 configuring device
s1c17 as OpenZAP device 1:17 fd:31 DTMF: software
2009-12-04 12:04:52.412568 [INFO] ozmod_wanpipe.c:287 configuring device
s1c18 as OpenZAP device 1:18 fd:32 DTMF: software
2009-12-04 12:04:52.412634 [INFO] ozmod_wanpipe.c:287 configuring device
s1c19 as OpenZAP device 1:19 fd:33 DTMF: software
2009-12-04 12:04:52.412708 [INFO] ozmod_wanpipe.c:287 configuring device
s1c20 as OpenZAP device 1:20 fd:34 DTMF: software
2009-12-04 12:04:52.412771 [INFO] ozmod_wanpipe.c:287 configuring device
s1c21 as OpenZAP device 1:21 fd:35 DTMF: software
2009-12-04 12:04:52.412838 [INFO] ozmod_wanpipe.c:287 configuring device
s1c22 as OpenZAP device 1:22 fd:36 DTMF: software
2009-12-04 12:04:52.412902 [INFO] ozmod_wanpipe.c:287 configuring device
s1c23 as OpenZAP device 1:23 fd:37 DTMF: software
2009-12-04 12:04:52.412948 [INFO] ozmod_wanpipe.c:287 configuring device
s1c24 as OpenZAP device 1:24 fd:38 DTMF: software
2009-12-04 12:04:52.412988 [INFO] ozmod_wanpipe.c:287 configuring device
s1c25 as OpenZAP device 1:25 fd:39 DTMF: software
2009-12-04 12:04:52.413018 [INFO] ozmod_wanpipe.c:287 configuring device
s1c26 as OpenZAP device 1:26 fd:40 DTMF: software
2009-12-04 12:04:52.413041 [INFO] ozmod_wanpipe.c:287 configuring device
s1c27 as OpenZAP device 1:27 fd:41 DTMF: software
2009-12-04 12:04:52.413063 [INFO] ozmod_wanpipe.c:287 configuring device
s1c28 as OpenZAP device 1:28 fd:42 DTMF: software
2009-12-04 12:04:52.413086 [INFO] ozmod_wanpipe.c:287 configuring device
s1c29 as OpenZAP device 1:29 fd:43 DTMF: software
2009-12-04 12:04:52.413106 [INFO] ozmod_wanpipe.c:287 configuring device
s1c30 as OpenZAP device 1:30 fd:44 DTMF: software
2009-12-04 12:04:52.413128 [INFO] ozmod_wanpipe.c:287 configuring device
s1c31 as OpenZAP device 1:31 fd:45 DTMF: software
2009-12-04 12:04:52.413142 [INFO] zap_io.c:2374 Configured 31 channel(s)
2009-12-04 12:04:52.431405 [INFO] zap_io.c:2468 Loading SIG from
/usr/local/freeswitch/mod/ozmod_ss7_boost.so
2009-12-04 12:04:52.431441 [INFO] zap_io.c:2584 auto-loaded 'ss7_boost'
2009-12-04 12:04:52.431541 [CONSOLE] switch_loadable_module.c:889
Successfully Loaded [mod_openzap]
2009-12-04 12:04:52.431553 [NOTICE] switch_loadable_module.c:142 Adding
Endpoint 'openzap'
2009-12-04 12:04:52.431638 [NOTICE] switch_loadable_module.c:248 Adding
Application 'disable_ec'
2009-12-04 12:04:52.431659 [NOTICE] switch_loadable_module.c:270 Adding API
Function 'oz'
2009-12-04 12:04:52.432009 [WARNING] ss7_boost_client.c:244 TX EVENT (P):
SYSTEM_RESTART:(87) [w1g1] Rc=0 CSid=0 Seq=0


Does this look right?
Thanks.

On Mon, Nov 30, 2009 at 9:09 PM, Moises Silva <moises.silva at gmail.com>wrote:

> On Mon, Nov 30, 2009 at 4:49 AM, Neil Patel <neilp at cs.stanford.edu> wrote:
>
>> Hi All,
>>
>> I am currently installing a Sangoma A102 card to work with FS using
>> wanpipe drivers (OS = Ubuntu Jaunty). The problem is I can't get
>> openzap-related modules to compile:
>>
>> > cd wanpipe-3.5.6.5/
>> > make openzap
>> ...
>> make[2]: Leaving directory `/usr/src/wanpipe-3.5.6.5/api/libsangoma'
>> make[1]: Leaving directory `/usr/src/wanpipe-3.5.6.5/api/libsangoma'
>> make -C api/libstelephony clean
>> make[1]: Entering directory `/usr/src/wanpipe-3.5.6.5/api/libstelephony'
>> make[1]: *** No rule to make target `clean'.  Stop.
>> make[1]: Leaving directory `/usr/src/wanpipe-3.5.6.5/api/libstelephony'
>> make: *** [all_lib] Error 2
>>
>> The libstelephony directory has no Makefile in it. Why is it missing? Is
>> there a version of wanpipe drivers that will work? I have been unsuccessful
>> with 3.4.4 and 3.5.6 in similar fashion.
>>
>>
> Hi Neil,
>
> Most likely the creation of the Makefile failed (since you mention you
> can't see a Makefile). Please be sure to have installed the pre-requisites
> listed at http://wiki.sangoma.com/Requirements
>
> Particularly in this case, libtool, autoconf and automake packages.
>
> --
> Moises Silva
> Software Developer
> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
> 9T3 Canada
> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20091204/bf531d7a/attachment-0002.html 


More information about the FreeSWITCH-users mailing list