[Freeswitch-users] Internal Profile sends RTP to external IP when using two network interfaces

[Brian West]

Well actually you do have issues you're going to have to specify the  
rtp-ip and sip-ip on BOTH profiles yourself because you're config is  
currently putting your external IP into the internal's settings.   
Please correct that and I'm sure it'll work then.

/b

On Aug 26, 2009, at 9:18 AM, Alberto Escudero-Pascual (lists) wrote:

>
>
> ASCII art follows
>
> voip-phones..... 10.0.46.1 [ FS ] 216.82.231.69 ----> Internet
>
>
> I have two profiles binded to two different IPs
>
> internal is binded to 10.0.46.1 port 5060 /24 network
> external is binded to 216.82.231.69 port 5080
>
> My IP phones are in the 10.0.46.X range and they register @  
> 10.0.46.1 IP
> address.
>
> When I place a call between the two phones in the 10.0.46.0/24 network
> the phones register but audio RTP is sent to 216.82.231.69 instead of
> 10.0.46.1 (FS)
>
> In this scenario i have FS without any NAT configuration.
>
> -- 
> The way that i solved was to run both profiles (internal and  
> external) in
> the public IP (local_ipv4) and force the phones to register with
> 216.82.231.69 instead of 10.0.46.1
>
> Thanks looong time!
>