[Freeswitch-users] zapata.conf immediate=yes in Asterisk - Freeswitch equivalent?

[Michael Jerris]

is this just the timeout waiting for your max digits?

       <param name="max-digits" value="11"/>


On Aug 8, 2009, at 4:58 AM, Merul Patel wrote:

> Hi,
>
> I came across this thread (http://lists.freeswitch.org/pipermail/freeswitch-users/2009-January/010172.html
> ) from January, and I'm having a similar problem, in that from the
> moment an incoming analogue call starts ringing, it takes around 5-7
> seconds before the dialplan gets executed.
>
> Tailing the freeswitch log (pastebin'd here: http://pastebin.com/f2a6f7945)
> , it seems to indicate that there is either a problem with an
> unhandled event 17 and/or a delay with the call being put in the
> GET_CALLERID state.
>
> In my case, I'm more concerned about answering the call rather than
> getting the caller id, so I tried setting <param name="enable-
> callerid" value="false"/> in openzap.conf.xml, as per the earlier
> post's author but this still doesn't get the dialplan to execute
> immediately.
>
> I'm running FS 1.0.4 built from the tarball, with zaptel 1.4.12.1 and
> wanpipe 3.5.4.18 in conjunction with a USBFXO device from Sangoma. I'm
> using the out -of-the-box configuration for FS, with the exception of
> one modified public dialplan. My openzap.conf.xml is:
>
> <configuration name="openzap.conf" description="OpenZAP  
> Configuration">
>   <settings>
>     <param name="debug" value="0"/>
>     <!--<param name="hold-music" value="$${moh_uri}"/>-->
>     <!--<param name="enable-analog-option" value="call-swap"/>-->
>     <!--<param name="enable-analog-option" value="3-way"/>-->
>   </settings>
>    <pri_spans/>
>   <!-- one entry here per openzap span -->
>   <analog_spans>
>     <span id="1">
>       <!--<param name="hold-music" value="$${moh_uri}"/>-->
>       <!--<param name="enable-analog-option" value="call-swap"/>-->
>       <!--<param name="enable-analog-option" value="3-way"/>-->
>       <param name="tonegroup" value="uk"/>
>       <param name="digit-timeout" value="2000"/>
>       <param name="max-digits" value="11"/>
>       <param name="dialplan" value="XML"/>
>       <param name="context" value="public"/>
>       <param name="enable-callerid" value="true"/>
>       <!-- regex to stop dialing when it matches -->
>       <!--<param name="dial-regex" value="5555"/>-->
>       <!-- regex to stop dialing when it does not match -->
>       <!--<param name="fail-dial-regex" value="^5"/>-->
>     </span>
>   </analog_spans>
> </configuration>
>
> Couldn't find any jiras for this issue, so not sure whether it was
> resolved. Any pointers would be welcome.
>
> BR
>
> Merul
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org