[Freeswitch-users] is there something like "flash operator panel" for freeswitch?

[Mikael Bjerkeland]

None that I know of, but it should be fairly simple to create FOP for FS
with the event socket.



2009/4/29 Antonio Gallo <gallo at mctelefonia.com>

> ok i did some test today using the yesterday's trunk with a gxp2010 and
> a snom360 both with 2 LEDS monitoring each other and themselves.
>
> Configuration:
>    gxp2010 user: 1000 led1: 1000 led2: 1001
>    snom360 user: 1001 led1: 1000 led2: 1001
>
> Problem with both phones:
> - when a phone reboot and it subscribe it does not get notified of the
> current status of the subscribed phones
>    i.e. if gxp is on the phone the snom led1 is off/unlit
>    i.e. if snom is on the phone the gxp led2 is off/unlit
>
> Problem with GXP only:
> - both subscribe LED stop working after a 1 or 2 calls until the gxp
> re-subscribe or re-register
>
>
> To skip using LED on phones is there is something like "flash operator
> panel" to display
> telephone status?
>
> Thanks in advance,
> Antonio (AGX)
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090429/34f6e48a/attachment-0002.html