[Freeswitch-users] VoicePulse Setup Help
Jim Flowers
jflowers at ezo.net
Tue Sep 23 18:25:39 PDT 2008
I've gotten very confused in trying to set VoicePulse up as an outgoing
gateway to the PSTN, after reading all the various wiki sections about
gateways and VoicePulse:
1. Added voicepulse.xml to conf/sip_profiles/default/external..
2. edited conf/dialplan/default.xml to route 10/11 digit calls to VoicePulse.
I get registered with VoicePulse OK and the gateways show up in '>sofia
status' but the routing isn't working.
Obviously, I'm doing something wrong but I'm at a loss at what that is. Can
someone point me in the right direction?
Thank you.
freeswitch.log
--------------
2008-09-22 21:05:41 [DEBUG] mod_enum.c:582 enum_dialplan_hunt() ENUM Lookup
on 13304535344
2008-09-22 21:05:41 [DEBUG] mod_enum.c:208 dnserror() unable to lookup NAPTR
record for 4.4.3.5.3.5.4.0.3.3.1.e164.org: valid domain but no data of
requested type
2008-09-22 21:05:41 [INFO] switch_core_state_machine.c:114
switch_core_standard_on_routing() No Route, Aborting
2008-09-22 21:05:41 [NOTICE] switch_core_state_machine.c:115
switch_core_standard_on_routing() Hangup sofia/internal/1000 at 192.168.2.2
[CS_ROUTING] [NO_ROUTE_DESTINATION]
voicepulse.xml
--------------
<include>
<gateway name="voicepulse">
<param name="username" value="Qrq22VWD13"/>
<param name="realm" value="jfk-primary.voicepulse.com"/>
<param name="password" value="FQA32wvw77"/>
<param name="proxy" value="nyc-primary.voicepulse.com"/>
<param name="expire-seconds" value="5000"/>
<param name="register" value="true"/>
</gateway>
<gateway name="voicepulse-backup">
<param name="username" value="Qrq24VWC12"/>
<param name="realm" value="jfk-backup.voicepulse.com"/>
<param name="password" value="FQU41wvx77"/>
<param name="proxy" value="nyc-primary.voicepulse.com"/>
<param name="extension" value="1000"/> <!-- inbound calls go to -->
<param name="expire-seconds" value="5000"/>
<param name="register" value="true"/>
</gateway>
</include>
default.xml
-----------
<!-- Dial any 10 digit number (2223334444) or 1+10 number (12223334444) here
-->
<extension name="Long Distance - voicepulse">
<condition field="destination_number" expression="^(1{0,1}\d{10})$">
<action application="set"
data="effective_caller_id_number=13304535344"/>
<!-- If your provider does not provide ringback (180 or 183) you may
simulate
ringback by uncommenting the following line. -->
<!-- action application="ringback" -->
<action application="bridge" data="sofia/gateway/voicepulse/$1"/>
</condition>
--
Jim Flowers <jflowers at ezo.net>
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
More information about the FreeSWITCH-users
mailing list