[Freeswitch-users] dialplan_hunt taking too long
ineya at post.sk
Fri Oct 10 00:49:34 PDT 2008
Thanks for the tip with f8. I did a call from soft phone (x-lite) 1003 to extension 5000.
This is the log:
So it seems, that dialplan_hunt is ok. As you can see, there is a gap ~8 seconds between line 127 and 128.
The PC is pentium 3, 1.8 GHz, which is pretty idle. It is running Debian etch x86 on kernel 2.6.18-6-686. I also made the same test on windows xp, and on other notebook running Debian Etch 64bit, and the gap was smaller (< 1-2 seconds).
I also did run freeswitch using gdb, and after I dialled extension 5000, I waited for a few seconds, and then I hit ctrl+c and made backtraces from all threads:
sample Wireshark trace on client side when dialling out extension 5000 (client is 220.127.116.11, server is 172.16.3.40):
My guess would be the \'while\' inside switch_rtp_set_local_address(), but I prefer to hear the expert opinion :-).
----- Original message-----
Od: \"Anthony Minessale\"
Poslaná: 10.10.2008 04:05
Predmet: Re: [Freeswitch-users] dialplan_hunt taking too long
> what extension is it hitting?
> The entire log with debug on would be more useful (press f8 on the console
> and try the call again)
Sprievodca herným svetom - http://hry.sme.sk/
More information about the FreeSWITCH-users