[Freeswitch-users] Sangoma A101, openzap, freeswitch 1.0pre4
Lukasz Kutkowski
lukasz at voiceworks.pl
Tue May 20 08:41:03 PDT 2008
Hi,
I don't know if this solve your problems but if you use zaptel and
wanpipe then /etc/openzap/openzap.conf should have:
[span zt]
If you use wanpipie with tdm api then /etc/openzap/openzap.conf should have:
[span wanpipe]
Regards,
Lukasz
Helmut Kuper wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hello,
>
> since mod_wanpipe is depricated, I try to get freeswitch with openzap,
> zaptel, wanpipe and Sangoma A101 E1-Pri-card running.
>
> I use zaptel-1.4.2, wanpipe-3.1.4 and ubuntu 2.6.20-16-server. ztcfg -vv
> ~ detects all channels and "wanrouter list" shows the card as active. In
> /dev/zap I have this devices:
>
> root at ip-pbx:/usr/src/wanpipe-3.1.4# ls -l /dev/zap/
> total 0
> crw-rw---- 1 root dialout 196, 1 2008-05-20 16:24 1
> crw-rw---- 1 root dialout 196, 10 2008-05-20 16:24 10
> crw-rw---- 1 root dialout 196, 11 2008-05-20 16:24 11
> crw-rw---- 1 root dialout 196, 12 2008-05-20 16:24 12
> crw-rw---- 1 root dialout 196, 13 2008-05-20 16:24 13
> crw-rw---- 1 root dialout 196, 14 2008-05-20 16:24 14
> crw-rw---- 1 root dialout 196, 15 2008-05-20 16:24 15
> crw-rw---- 1 root dialout 196, 16 2008-05-20 16:24 16
> crw-rw---- 1 root dialout 196, 17 2008-05-20 16:24 17
> crw-rw---- 1 root dialout 196, 18 2008-05-20 16:24 18
> crw-rw---- 1 root dialout 196, 19 2008-05-20 16:24 19
> crw-rw---- 1 root dialout 196, 2 2008-05-20 16:24 2
> crw-rw---- 1 root dialout 196, 20 2008-05-20 16:24 20
> crw-rw---- 1 root dialout 196, 21 2008-05-20 16:24 21
> crw-rw---- 1 root dialout 196, 22 2008-05-20 16:24 22
> crw-rw---- 1 root dialout 196, 23 2008-05-20 16:24 23
> crw-rw---- 1 root dialout 196, 24 2008-05-20 16:24 24
> crw-rw---- 1 root dialout 196, 25 2008-05-20 16:24 25
> crw-rw---- 1 root dialout 196, 26 2008-05-20 16:24 26
> crw-rw---- 1 root dialout 196, 27 2008-05-20 16:24 27
> crw-rw---- 1 root dialout 196, 28 2008-05-20 16:24 28
> crw-rw---- 1 root dialout 196, 29 2008-05-20 16:24 29
> crw-rw---- 1 root dialout 196, 3 2008-05-20 16:24 3
> crw-rw---- 1 root dialout 196, 30 2008-05-20 16:24 30
> crw-rw---- 1 root dialout 196, 31 2008-05-20 16:24 31
> crw-rw---- 1 root dialout 196, 4 2008-05-20 16:24 4
> crw-rw---- 1 root dialout 196, 5 2008-05-20 16:24 5
> crw-rw---- 1 root dialout 196, 6 2008-05-20 16:24 6
> crw-rw---- 1 root dialout 196, 7 2008-05-20 16:24 7
> crw-rw---- 1 root dialout 196, 8 2008-05-20 16:24 8
> crw-rw---- 1 root dialout 196, 9 2008-05-20 16:24 9
> crw-rw---- 1 root dialout 196, 254 2008-05-20 16:24 channel
> crw-rw---- 1 root dialout 196, 0 2008-05-20 16:24 ctl
> crw-rw---- 1 root dialout 196, 255 2008-05-20 16:24 pseudo
> crw-rw---- 1 root dialout 196, 253 2008-05-20 16:24 timer
> crw-rw---- 1 asterisk asterisk 196, 250 2008-05-20 16:24 transcode
>
>
> Freeswitch was compiled with openzap. openzap.conf.xml is in
> autoload_configs and has this content:
>
> <configuration name="openzap.conf" description="OpenZAP Configuration">
> ~ <settings>
> ~ <param name="debug" value="7"/>
> ~ </settings>
> ~ <pri_spans>
> ~ <span id="1">
> ~ <param name="mode" value="user"/>
> ~ <param name="dialect" value="euro"/>
> ~ <param name="dialplan" value="XML"/>
> ~ <param name="context" value="default"/>
> ~ </span>
> ~ </pri_spans>
> ~ </configuration>
>
>
> /etc/openzap/openzap.conf has this content:
> [span wanpipe]
> trunk_type => e1
> b-channel => 1:1-15, 1:17-31
> d-channel=> 1:16
>
>
> freeswitch console log is:
>
> 2008-05-20 16:30:59 [NOTICE] switch_loadable_module.c:380
> switch_loadable_module_process() Adding Management interface 'mod_sofia'
> OID[.1.3.6.1.4.1.27880.1]
> 2008-05-20 16:30:59 [ERR] zap_zt.c:721 zt_init() Cannot open control device
> 2008-05-20 16:30:59 [ERR] zap_io.c:2050 zap_global_init() Error
> initilizing zt.
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c1
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c2
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c3
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c4
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c5
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c6
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c7
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c8
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c9
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c10
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c11
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c12
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c13
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c14
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c15
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c17
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c18
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c19
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c20
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c21
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c22
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c23
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c24
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c25
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c26
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c27
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c28
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c29
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c30
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c31
> 2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure
> configuring device s1c16
> 2008-05-20 16:30:59 [INFO] zap_io.c:1984 load_config() Configured 0
> channel(s)
> 2008-05-20 16:30:59 [ERR] zap_io.c:2077 zap_global_init() No modules
> configured!
> 2008-05-20 16:30:59 [ERR] mod_openzap.c:1855 mod_openzap_load() Error
> loading OpenZAP
> 2008-05-20 16:30:59 [CRIT] switch_loadable_module.c:727
> switch_loadable_module_load_file() Error Loading module
> /opt/app/freeswitch/mod/mod_openzap.so
> **Module load routine returned an error**
> 2008-05-20 16:30:59 [NOTICE] switch_loadable_module.c:245
> switch_loadable_module_process() Adding API Function 'originate'
>
> any ideas?
>
> regards
> helmut
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.8 (MingW32)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iEYEARECAAYFAkgy61YACgkQ4tZeNddg3dzGdgCdEqgGISo4UYUcHQE7tTlehG10
> JxYAnAyvl4qd0YBg1v+EE3h63Q2bMQDB
> =ZQ+R
> -----END PGP SIGNATURE-----
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
More information about the FreeSWITCH-users
mailing list