[Freeswitch-users] On-Hold takes 5 seconds

[Brian West]

Try anything after rev 8857

/b

On Jun 26, 2008, at 8:23 PM, mayamatakeshi wrote:

> Hello,
> I'm playing with FreeSwitch svn revision 8849.
> When I try to put an established call on hold (I'm using eyebeam),  
> FreeSwitch takes 5 seconds to reply with 200 OK.
> This would not be a big problem by itself, but it seems this OnHold  
> processing blocks the reply for all other incoming calls (or SIP  
> calls at least).
> As an example, below are the timestamps of a call to 9998 from the  
> time the INVITE ONHOLD was sent and of a new call to 9997 (which  
> itself caused eyebeam to put 9998 on hold) till the reception of  
> 200OK. You will see the 200 OK for the 9997 call will only happen  
> after 200 OK for 9998 REINVITE for ONHOLD is transmmited (9998 and  
> 9987 are the test numbers from default.xml dialplan. I copied them  
> to public.xml so that I would not be bothered with authentication  
> messages during this test):
>
> 09:52:40.6
> SENDING TO: 192.168.128.3:5080
> INVITE sip:mod_sofia at 192.168.128.3:5080;transport=udp SIP/2.0
> To: <sip:9998 at freeswitch>;tag=ZpggZ9jgp01tj
> From: 1001 <sip:1001 at freeswitch>;tag=5a0b7d40
> a=sendonly
>
> 09:52:40.6
> RECEIVING FROM: 192.168.128.3:5080
> SIP/2.0 100 Trying
> From: 1001 <sip:1001 at freeswitch>;tag=5a0b7d40
> To: <sip:9998 at freeswitch>;tag=ZpggZ9jgp01tj
>
> 09:52:41.4
> SENDING TO: 192.168.128.3:5080
> INVITE sip:9997 at freeswitch SIP/2.0
> To: <sip:9997 at freeswitch>
> From: 1001<sip:1001 at freeswitch>;tag=226ba00e
> a=sendrecv
>
> 09:52:41.5
> RECEIVING FROM: 192.168.128.3:5080
> SIP/2.0 100 Trying
> From: 1001 <sip:1001 at freeswitch>;tag=226ba00e
> To: <sip:9997 at freeswitch>
>
> 09:52:45.6
> RECEIVING FROM: 192.168.128.3:5080
> SIP/2.0 200 OK
> From: 1001 <sip:1001 at freeswitch>;tag=5a0b7d40
> To: <sip:9998 at freeswitch>;tag=ZpggZ9jgp01tj
> a=sendrecv
>
> 09:52:45.6
> SENDING TO: 192.168.128.3:5080
> ACK sip:mod_sofia at 192.168.128.3:5080;transport=udp SIP/2.0
> To: <sip:9998 at freeswitch>;tag=ZpggZ9jgp01tj
> From: 1001 <sip:1001 at freeswitch>;tag=5a0b7d40
>
> 09:52:45.7
> RECEIVING FROM: 192.168.128.3:5080
> SIP/2.0 200 OK
> From: 1001 <sip:1001 at freeswitch>;tag=226ba00e
> To: <sip:9997 at freeswitch>;tag=0Z98043KK9QDe
> a=sendrecv
>
>
> I also tried to initiate a call with another softphone (SIP  
> Communicator) while eyebeam was putting its call on hold and the  
> same thing happened.
> On the other hand INVITE OFFHOLD is replied instantly.
>
> Regards,
> takeshi
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org

Brian West
sip:brian at freeswitch.org



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20080627/74b42b61/attachment-0002.html