[Freeswitch-users] Gafachi Again

[David Knell]

Hi Klaus,

You might want to try setting the variables before originating the call 
- the 'originate' will cause the call setup message to be sent.

--Dave
> OK, Let me give you the full picture; here is what i do, but it still doesn't work. baiscally, i just want to dial two users and connect them to each other. Each side seeing the number of the other side as caller id.
>
>
> new_session2 = new Session();
> new_session2.originate(null, 'sofia/gateway/sip.gafachi.com/1'+caller_number, 15);
>
> new_session2.setVariable("origination_caller_id_number", callee_number);
> new_session2.setVariable("origination_caller_id_name", 'Klaus Teller');
>
> new_session2.waitForAnswer(10000);
>
> new_session1 = new Session();
> new_session1.originate(new_session2, 'sofia/gateway/sip.gafachi.com/1'+callee_number, 15);
> new_session1.setVariable("effctive_caller_id_number", caller_number);
> new_session1.setVariable("effective_caller_id_name", 'Klaus Teller');
>
>
>
> I also tried effective on both sides as well as origibation on both sides.
>
> Klaus.
>  
>
> -------- Original-Nachricht --------
>   
>> Datum: Tue, 29 Jul 2008 23:36:10 -0500
>> Von: Brian West <brian at freeswitch.org>
>> An: freeswitch-users at lists.freeswitch.org
>> Betreff: Re: [Freeswitch-users] Gafachi Again
>>     
>
>   
>> This is clearly a case where you're creating an A leg.  Let me lay out  
>> some info here that will clear this up...
>>
>>
>> origination_caller_id_name / origination_caller_id_number  - These to  
>> variables are used to set the caller_id info on a leg that you are  
>> creating in this case the A-Leg
>> While the effective_caller_id_name / effective_caller_id_number are  
>> used to set the caller id for any legs that are born from the A-leg,  
>> these values are used on the B-leg's caller_id_name/number values.
>>
>> /b
>>
>>
>>
>> On Jul 29, 2008, at 11:21 PM, Klaus Teller wrote:
>>
>>     
>>> I just did the following:
>>>
>>> new_session1 = new Session();
>>> new_session1.originate(new_session2, 'sofia/gateway/sip.gafachi.com/ 
>>> 1'+callee_number, 15);
>>> new_session1.setVariable("effective_caller_id_number", caller_number);
>>> new_session1.setVariable("effective_caller_id_name", 'Klaus Teller');
>>>
>>> As a result, I have the callee number being shown on its own display  
>>> as caller. That is on the called device the number callee_number is  
>>> being displayed instead of caller_number.
>>>
>>> What am i doing wrong?
>>>
>>> Klaus.
>>>       
>> Brian West
>> sip:brian at freeswitch.org
>>
>>
>>
>>
>> _______________________________________________
>> Freeswitch-users mailing list
>> Freeswitch-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>     
>
>   


-- 
David Knell, Director, 3C Limited
T: 020 8114 8901  F: 020 3002 7257  M: 001 415 630 3031
http://www.3c.co.uk 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20080730/abb7f4ab/attachment-0002.html