[Freeswitch-users] OpenZap and tones.conf - FXO hangup problem
Col Ferguson
asterisk at coltect.no-ip.com
Mon Jul 21 07:26:38 PDT 2008
I'd love to, but I was up till 3 last night playing with it and wife is getting mad. I haven't tried anything apart from kewlstart as that works in asterisk. Also I have never used irc, and have no idea how to "lab it up". I'll have a go for a little while then will have to go to bed.
See you on irc soon.
Thanks,
Col
----- Original Message -----
From: Anthony Minessale
To: freeswitch-users at lists.freeswitch.org
Sent: Tuesday, July 22, 2008 12:10 AM
Subject: Re: [Freeswitch-users] OpenZap and tones.conf - FXO hangup problem
did you play around with the fxo types like kewlstart etc.
maybe if you would like to join irc and lab it up for us, we can have a look at it on your box in real time.
On Mon, Jul 21, 2008 at 9:10 AM, Col Ferguson <asterisk at coltect.no-ip.com> wrote:
I'm using zaptel-1.4.9.2.xpp.r5566 (I had this downloaded already for an
asterisk install). I tried 1.4.11 svn trunk initially, but changed to
1.4.9.2 in case it was something to do with the svn trunk code. I have
another box with asterisk 1.4.18.1 and zaptel 1.4.9.2.xpp.r5566 working
fine.
I am using freeswitch svn trunk, as I read somewhere in the user list
archives that there were openzap fixes done recently.
Any other info that may help ?
Thanks,
Col
----- Original Message -----
From: Anthony Minessale
To: freeswitch-users at lists.freeswitch.org
Sent: Monday, July 21, 2008 11:31 PM
Subject: Re: [Freeswitch-users] OpenZap and tones.conf - FXO hangup problem
What driver are you using underneath for the FXO.
On Mon, Jul 21, 2008 at 7:44 AM, Col Ferguson <asterisk at coltect.no-ip.com>
wrote:
Hello all,
I have installed freeswitch and had a bit of a play over the last few days
and have a question about the format of the tones.conf file for OpenZap.
I have a Xorcom Astribank to play with at the moment and have it working
mostly. I haven't done anything with the SIP part at all yet.
My basic hurdle at the moment is detecting a hangup on an FXO port before
any bridged FXS extensions answer.
If I hangup the line I am ringing into, the FXS extension keeps on ringing,
then when the FXS extension is answered it is bridged to the FXO port and I
get a dialtone and access to the FXO PSTN line directly.
I read a post that alluded to the possibility that having the wrong info in
tones.conf may result in strange behaviour as openzap doesn't recognise
tones correctly. I could be completely wrong, and often am, but thats always
been a good way to learn stuff.
I haven't been able to find any good info on the format of tones.conf, but
have managed to work out a few things so far.
I have this is tones.conf for au, and its loading properly, but I don't know
what its doing exactly.
[au]
generate-dial => v=-7;%(1000,0,413,438)
detect-dial => 413,438
generate-ring => v=-7;%(400,200,413,438);%(400,2000,413,438)
detect-ring => 413,438
generate-busy => v=-7;%(375,375,425)
detect-busy => 425
generate-attn => v=0;%(100,100,1400,2060,2450,2600)
detect-attn => 1400,2060,2450,2600
generate-callwaiting-sas => v=0;%(300,0,440)
detect-callwaiting-sas => 440
generate-callwaiting-cas => v=0;%(80,0,2750,2130)
detect-callwaiting-cas => 2750,2130
detect-fail1 => 913.8
detect-fail2 => 1370.6
detect-fail3 => 776.7
Using the generate-ring line as an example
generate-ring => v=-7;%(400,200,413,438);%(400,2000,413,438)
I think that
generate-ring is for generating the ring tone used internally by ring_ready
(and probably other areas I haven't found/noticed yet)
; is a separator
v=-7 probably sets a volume level ?
%(400,200,413,438) 400 is the time for the tone to be on, 200 is the time
for the tone to be off, 413 is the first tone played, 438 is the second tone
played ?
%(400,2000,413,438) 400 is the time for the tone to be on, 2000 is the time
for the tone to be off, 413 is the first tone played, 438 is the second tone
played ?
(I found some code in switch.conf.xml that sets up ring tones that showed
using the two lots of settings, and this sounds right for me in Australia. I
got the freqs from a Sipura, asterisk source and a web site
www.3amsystems.com)
detect-ring is used to look for a specific tone ?
So what then is the information in generate-attn =>
v=0;%(100,100,1400,2060,2450,2600) doing ?
Also what are detect-fail1,2,3 for ?
Is there anywhere to set a disconnect tone ?
As far as I can tell, Australia uses the busy tone to indicate a hangup,
which sometimes comes after a period of silence.
In case I am completely off track my dialplan is below. All Zap channels are
corresponding numbers, ie channel 1 is number 1 etc. Channel 1-8 are FXS,
9-14 ate FXS but input/outputs, 15-22 are FXS and 23-30 are FXO.
This is from /usr/local/freeswitch/conf/dialplan/extensions/home.xml
Please point out anything silly in here.
<extension name="out-zap-channel-7">
<condition field="destination_number" expression="^(7)$">
<action application="ring_ready"/>
<action application="bridge" data="openzap/7/1"/>
</condition>
</extension>
<extension name="out-zap-channel-8">
<condition field="destination_number" expression="^(8)$">
<action application="ring_ready"/>
<action application="bridge" data="openzap/8/1"/>
</condition>
</extension>
<extension name="in-zap-channel-27">
<condition field="destination_number" expression="^(27)$">
<!--<action application="set" data="hangup_after_bridge=true"/>-->
<!--Couldn't see a difference-->
<!--<action application="set" data="effective_caller_id_name=6055
Line"/>--> <!--fiddling-->
<!--<action application="set"
data="effective_caller_id_number=6055"/>-->
<!--fiddling-->
<!--<action application="tone_detect" data="busy 425 r +5 hangup
normal_clearing"/>--> <!--Really thought this might work-->
<!--<action application="answer"/>-->
<!--Tried a simple ivr and symptoms same. ivr bridges call-->
<!--<action application="sleep" data="2000"/>-->
<!--hangup incoming call before answering with FXS-->
<!--<action application="ivr" data="coltect_ivr"/>-->
<!--and FXS still rings-->
<action application="bridge" data="openzap/8/1"/>
<!--<action application="transfer" data="8"/>
</condition>
</extension>
Thanks,
Col
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
--
Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
AIM: anthm
MSN:anthony_minessale at hotmail.com
GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com
IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference
sip:888 at conference.freeswitch.org
iax:guest at conference.freeswitch.org/888
googletalk:conf+888 at conference.freeswitch.org
pstn:213-799-1400
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
--
Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
AIM: anthm
MSN:anthony_minessale at hotmail.com
GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com
IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference
sip:888 at conference.freeswitch.org
iax:guest at conference.freeswitch.org/888
googletalk:conf+888 at conference.freeswitch.org
pstn:213-799-1400
------------------------------------------------------------------------------
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20080722/bc202300/attachment-0002.html
More information about the FreeSWITCH-users
mailing list