[Freeswitch-users] Not able to make an outgoing Call through FXO....

Wed Jan 9 17:27:45 PST 2008

Yes, these are set in tones.conf.  You will need to add the correct  
values for your area (we can add them to the default config if you can  
provide those).  Also, please update to the current code, tony just  
added quite a few features to mod_openzap including support for hold  
music, transfer (blind and attended), and 3-way.

Mike

On Jan 9, 2008, at 7:57 AM, Irshad Ahamed wrote:

> With the same set-up, Outgoing calls are working fine with Asterisk.
>
> Are there any tools to detect the presence of dial tone??? If it's  
> any parameter issue, can we adjust those parameters???
>
> NOTE: I copied tones.conf available from the source code to /etc/ 
> openzap/
>
>  BR,
> Irshad.
>
>
> On Jan 5, 2008 12:00 AM, Anthony Minessale <anthmct at yahoo.com > wrote:
> I think it's waiting for a dialtone before it sends the digits
> and then giving up because it can't fine one.
>
>
>
> Anthony Minessale II
>
> FreeSWITCH http://www.freeswitch.org/
> ClueCon http://www.cluecon.com/
>
> AIM: anthm
> MSN:anthony_minessale at hotmail.com
> GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com
> IRC: irc.freenode.net #freeswitch
>
> FreeSWITCH Developer Conference
> sip:888 at conference.freeswitch.org
> iax:guest at conference.freeswitch.org/888
> googletalk:conf+888 at conference.freeswitch.org
> pstn:213-799-1400
>
>
> ----- Original Message ----
> From: Irshad Ahamed < irshad.fswitch at gmail.com>
> To: freeswitch-users at lists.freeswitch.org; freeswitch-dev at lists.freeswitch.org
> Sent: Friday, January 4, 2008 4:24:07 AM
> Subject: Re: [Freeswitch-users] Not able to make an outgoing Call  
> through FXO....
>
> Hi Anthony,
>
> Thanks for the info. By adding the span-ID = 2 , I was able to  
> receive an incoming call successfully.
> The dialplan/default.xml is as below:
>   <extension name="incoming">
>     <condition field="destination_number" expression="^(1)$">
>       <action application="bridge" data="openzap/1/1"/>
>       <!--action application="bridge" data="openzap/1/1"/>-->
>     </condition>
>   </extension>
>
>   <extension name="outgoing-fxo">
>     <condition field="destination_number" expression="^(43)$">
>       <action application="bridge" data="openzap/2/1/43"/>
>     </condition>
>   </extension>
>
> The Openzap.conf.xml looks like below:
>
> <configuration name="openzap.conf" description="OpenZAP  
> Configuration">
>   <settings>
>     <param name="debug" value="9"/>
>   </settings>
>   <analog_spans>
>     <span id="1">
>       <param name="tonegroup" value="us"/>
>       <param name="digit-timeout" value="2000"/>
>       <param name="max-digits" value="11"/>
>       <param name="dialplan" value="XML"/>
>       <param name="context" value="default"/>
>       <!-- regex to stop dialing when it matches -->
>       <!--<param name="dial-regex" value="5555"/>-->
>       <!-- regex to stop dialing when it does not match -->
>       <!--<param name="fail-dial-regex" value="^5"/>-->
>     </span>
>     <span id="2">
>       <param name="tonegroup" value="us"/>
>       <param name="digit-timeout" value="2000"/>
>       <param name="max-digits" value="1"/>
>       <param name="dialplan" value="XML"/>
>       <param name="context" value="default"/>
>       <!-- regex to stop dialing when it matches -->
>       <!--<param name="dial-regex" value="5555"/>-->
>       <!-- regex to stop dialing when it does not match -->
>       <!--<param name="fail-dial-regex" value="^5"/>-->
>     </span>
>   </analog_spans>
> </configuration>
>
> But still I am unable to make an Outgoing Call. Please have a look  
> at the Freeswitch Log below:
>
> 2008-01-04 15:45:03 [DEBUG] zap_analog.c:664 process_event() EVENT  
> [OFFHOOK][1:1] STATE [DOWN]
> 2008-01-04 15:45:03 [DEBUG] zap_analog.c:726 process_event()  
> Changing state on 1:1 from DOWN to DIALTONE
> 2008-01-04 15:45:03 [DEBUG] zap_analog.c:184  
> zap_analog_channel_run() ANALOG CHANNEL thread starting.
> 2008-01-04 15:45:03 [DEBUG] zap_analog.c:351  
> zap_analog_channel_run() Executing state handler on 1:1 for DIALTONE
> 2008-01-04 15:45:07 [DEBUG] zap_analog.c:490  
> zap_analog_channel_run() DTMF 4
> 2008-01-04 15:45:07 [DEBUG] zap_analog.c:492  
> zap_analog_channel_run() Changing state on 1:1 from DIALTONE to  
> COLLECT
> 2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got  
> FXS sig [COLLECTED_DIGIT]
> 2008-01-04 15:45:07 [DEBUG] zap_analog.c:351  
> zap_analog_channel_run() Executing state handler on 1:1 for COLLECT
> 2008-01-04 15:45:07 [DEBUG] zap_analog.c:490  
> zap_analog_channel_run() DTMF 2
> 2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got  
> FXS sig [COLLECTED_DIGIT]
> 2008-01-04 15:45:09 [DEBUG] zap_analog.c:507  
> zap_analog_channel_run() Number obtained [42]
> 2008-01-04 15:45:09 [DEBUG] zap_analog.c:508  
> zap_analog_channel_run() Changing state on 1:1 from COLLECT to IDLE
> 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351  
> zap_analog_channel_run() Executing state handler on 1:1 for IDLE
> 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got  
> FXS sig [START]
> 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec  
> PCMU 20ms
> 2008-01-04 15:45:09 [NOTICE] switch_channel.c:392  
> switch_channel_set_name() New Chan OpenZAP/42 [8d46eb7f-4305-49e8- 
> a4a5-eb97af3b696b]
> 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:892  
> zap_channel_from_event() OpenZAP/42 State Change CS_NEW -> CS_INIT
> 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625  
> switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK]
> 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397  
> switch_core_session_run() (OpenZAP/42) State INIT
> 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init()  
> OpenZAP/42 State Change CS_INIT -> CS_RING
> 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625  
> switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK]
> 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400  
> switch_core_session_run() (OpenZAP/42) State RING
> 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring()  
> OpenZAP/42 CHANNEL RING
> 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:64  
> switch_core_standard_on_ring() Standard RING OpenZAP/42
> 2008-01-04 15:45:09 [INFO] mod_dialplan_xml.c:217 dialplan_hunt()  
> Processing OpenZAP->42!
> 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten()  
> test conditions ${numbering_plan}() =~ //
> 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten()  
> test conditions destination_number(42) =~ /^(1)$/
> 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten()  
> Regex mismatch
> 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten()  
> test conditions destination_number(42) =~ /^(43)$/
> 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten()  
> Regex mismatch
> 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten()  
> test conditions destination_number(42) =~ /^(42)$/
> 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:273 dialplan_hunt()  
> OpenZAP/42 State Change CS_RING -> CS_EXECUTE
> 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625  
> switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK]
> 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:406  
> switch_core_session_run() (OpenZAP/42) State EXECUTE
> 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:294 channel_on_execute()  
> OpenZAP/42 CHANNEL EXECUTE
> 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:121  
> switch_core_standard_on_execute() Standard EXECUTE
> 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134  
> switch_core_standard_on_execute() Execute set(use_profile=${cond($ 
> {is_lan_addr(${network_addr})} == yes ? nat : default)})
> 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158  
> switch_core_standard_on_execute() Expanded String  
> set(use_profile=default)
> 2008-01-04 15:45:09 [DEBUG] mod_dptools.c:419 set_function() SET  
> [use_profile]=[default]
> 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134  
> switch_core_standard_on_execute() Execute set_user(default@${domain})
> 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158  
> switch_core_standard_on_execute() Expanded String set_user( default at 192.168.2.51 
> )
> 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134  
> switch_core_standard_on_execute() Execute info()
> 2008-01-04 15:45:09 [CRIT] mod_dptools.c:630 info_function()  
> CHANNEL_DATA:
> Channel-State: CS_EXECUTE
> Channel-State-Number: 4
> Channel-Name: OpenZAP/42
> Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b
> Channel-Read-Codec-Name: PCMU
> Channel-Read-Codec-Rate: 8000
> Channel-Write-Codec-Name: PCMU
> Channel-Write-Codec-Rate: 8000
> Caller-Username: OpenZAP
> Caller-Dialplan: XML
> Caller-Caller-ID-Name: OpenZAP
> Caller-Caller-ID-Number: 1
> Caller-Destination-Number: 42
> Caller-Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b
> Caller-Source: mod_openzap
> Caller-Context: default
> Caller-Channel-Name: OpenZAP/42
> Caller-Channel-Created-Time: 1199441709953187
> Caller-Channel-Answered-Time: 0
> Caller-Channel-Hangup-Time: 0
> Caller-Channel-Transfer-Time: 0
> Caller-Screen-Bit: yes
> Caller-Privacy-Hide-Name: no
> Caller-Privacy-Hide-Number: no
> variable_use_profile: default
> variable_numbering_plan: US
> variable_user_name: default
> variable_domain_name: 192.168.2.51
>
>
> 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134  
> switch_core_standard_on_execute() Execute answer()
> 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:663  
> channel_receive_message_fxs() Changing state on 1:1 from IDLE to UP
> 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:339  
> switch_core_session_receive_message() Kill OpenZAP/42 [BREAK]
> 2008-01-04 15:45:09 [NOTICE] mod_dptools.c:361 answer_function()  
> Channel [OpenZAP/42] has been answered
> 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134  
> switch_core_standard_on_execute() Execute bridge(openzap/ 
> 2/1/42)2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set  
> codec PCMU 20ms
> 2008-01-04 15:45:09 [NOTICE] switch_channel.c:392  
> switch_channel_set_name() New Chan OPENZAP/42 [bef803ed- 
> e932-4a22-84e7-9131070fe771]
> 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:802  
> channel_outgoing_channel() OPENZAP/42 State Change CS_NEW -> CS_INIT
> 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625  
> switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK]
> 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351  
> zap_analog_channel_run() Executing state handler on 1:1 for UP
> 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got  
> FXS sig [UP]
> 2008-01-04 15:45:09 [DEBUG] zap_analog.c:55  
> analog_fxo_outgoing_call() Changing state on 2:1 from DOWN to DIALING
> 2008-01-04 15:45:09 [DEBUG] zap_analog.c:184  
> zap_analog_channel_run() ANALOG CHANNEL thread starting.
> 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351  
> zap_analog_channel_run() Executing state handler on 2:1 for DIALING
> 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397  
> switch_core_session_run() (OPENZAP/42) State INIT
> 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init()  
> OPENZAP/42 State Change CS_INIT -> CS_RING
> 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625  
> switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK]
> 2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:625  
> switch_ivr_originate() Raw Codec Activation Success L16 at 8000hz 1  
> channel 20ms
> 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400  
> switch_core_session_run() (OPENZAP/42) State RING
> 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring()  
> OPENZAP/42 CHANNEL RING
> 2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:48  
> originate_on_ring() OPENZAP/42 State Change CS_RING -> CS_HOLD
> 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625  
> switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK]
> 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:415  
> switch_core_session_run() (OPENZAP/42) State HOLD
> 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:204  
> switch_core_standard_on_hold() Standard HOLD
>
>
> freeswitch at sipxpbx.oneconv.com>
>
> freeswitch at sipxpbx.oneconv.com >
>
> freeswitch at sipxpbx.oneconv.com> 2008-01-04 15:45:39 [DEBUG]  
> zap_analog.c:244 zap_analog_channel_run() Changing state on 2:1 from  
> DIALING to BUSY
> 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351  
> zap_analog_channel_run() Executing state handler on 2:1 for BUSY
> 2008-01-04 15:45:40 [DEBUG] zap_analog.c:467  
> zap_analog_channel_run() Changing state on 2:1 from BUSY to DOWN
> 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351  
> zap_analog_channel_run() Executing state handler on 2:1 for DOWN
> 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:916 on_fxo_signal() got  
> FXO sig 2:1 [STOP]
> 2008-01-04 15:45:40 [NOTICE] mod_openzap.c:934 on_fxo_signal()  
> Hangup OPENZAP/42 [CS_HOLD] [NORMAL_CIRCUIT_CONGESTION]
> 2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071  
> switch_channel_perform_hangup() Kill OPENZAP/42 [KILL]
> 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625  
> switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK]
> 2008-01-04 15:45:40 [DEBUG] zap_analog.c:648  
> zap_analog_channel_run() ANALOG CHANNEL thread ended.
> 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394  
> switch_core_session_run() (OPENZAP/42) State HANGUP
> 2008-01-04 15:45:40 [WARNING] mod_openzap.c:319 channel_on_hangup()  
> VETO Changing state on 2:1 from DOWN to HANGUP
> 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup()  
> OPENZAP/42 CHANNEL HANGUP
> 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45  
> switch_core_standard_on_hangup() Standard HANGUP OPENZAP/42, cause:  
> NORMAL_CIRCUIT_CONGESTION
> 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683  
> switch_core_session_thread() Session 4 (OPENZAP/42) Locked, Waiting  
> on external entities
> 2008-01-04 15:45:40 [DEBUG] switch_ivr_originate.c:873  
> switch_ivr_originate() Originate Resulted in Error Cause: 34  
> [NORMAL_CIRCUIT_CONGESTION]
> 2008-01-04 15:45:40 [INFO] mod_dptools.c:1331  
> audio_bridge_function() Originate Failed.  Cause:  
> NORMAL_CIRCUIT_CONGESTION
> 2008-01-04 15:45:40 [NOTICE] mod_dptools.c:1358  
> audio_bridge_function() Hangup OpenZAP/42 [CS_EXECUTE]  
> [NORMAL_CIRCUIT_CONGESTION]
> 2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071  
> switch_channel_perform_hangup() Kill OpenZAP/42 [KILL]
> 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625  
> switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK]
> 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394  
> switch_core_session_run() (OpenZAP/42) State HANGUP
> 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:329 channel_on_hangup()  
> Changing state on 1:1 from UP to HANGUP
> 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup()  
> OpenZAP/42 CHANNEL HANGUP
> 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45  
> switch_core_standard_on_hangup() Standard HANGUP OpenZAP/42, cause:  
> NORMAL_CIRCUIT_CONGESTION
> 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683  
> switch_core_session_thread() Session 3 (OpenZAP/42) Locked, Waiting  
> on external entities
> 2008-01-04 15:45:40 [INFO] switch_core_session.c:689  
> switch_core_session_thread() Session 3 (OpenZAP/42) Ended
> 2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691  
> switch_core_session_thread() Close Channel OpenZAP/42 [CS_HANGUP]
> 2008-01-04 15:45:40 [INFO] switch_core_session.c:689  
> switch_core_session_thread() Session 4 (OPENZAP/42) Ended
> 2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691  
> switch_core_session_thread() Close Channel OPENZAP/42 [CS_HANGUP]
> 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351  
> zap_analog_channel_run() Executing state handler on 1:1 for HANGUP
> 2008-01-04 15:45:40 [DEBUG] zap_analog.c:290  
> zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY
> 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351  
> zap_analog_channel_run() Executing state handler on 1:1 for BUSY
> 2008-01-04 15:45:53 [DEBUG] zap_analog.c:664 process_event() EVENT  
> [ONHOOK][1:1] STATE [BUSY]
> 2008-01-04 15:45:53 [DEBUG] zap_analog.c:690 process_event()  
> Changing state on 1:1 from BUSY to DOWN
> 2008-01-04 15:45:53 [DEBUG] zap_analog.c:351  
> zap_analog_channel_run() Executing state handler on 1:1 for DOWN
> 2008-01-04 15:45:53 [DEBUG] mod_openzap.c:968 on_fxs_signal() got  
> FXS sig [STOP]
> 2008-01-04 15:45:53 [DEBUG] zap_analog.c:648  
> zap_analog_channel_run() ANALOG CHANNEL thread ended.
>
> Thanks,
> Irshad.
>
>
>
>
>
> On Jan 3, 2008 7:43 PM, Anthony Minessale < anthmct at yahoo.com> wrote:
> What does openzap.conf.xml look like?
> Perhaps you are using the default which only has 1 span defined.
> Try cloning the whole <span id="1"> block so there
> is a span 1 and 2 like this:
>
> <configuration name=" openzap.conf" description="OpenZAP  
> Configuration">
>   <settings>
>     <param name="debug" value="0"/>
>   </settings>
>   <analog_spans>
>     <span id="1">
>       <param name="tonegroup" value="us"/>
>       <param name="digit-timeout" value="2000"/>
>       <param name="max-digits" value="11"/>
>       <param name="dialplan" value="XML"/>
>       <param name="context" value="default"/>
>       <!-- regex to stop dialing when it matches -->
>       <!--<param name="dial-regex" value="5555"/>-->
>       <!-- regex to stop dialing when it does not match -->
>       <!--<param name="fail-dial-regex" value="^5"/>-->
>     </span>
>
>     <span id="2">
>       <param name="tonegroup" value="us"/>
>       <param name="digit-timeout" value="2000"/>
>       <param name="max-digits" value="11"/>
>       <param name="dialplan" value="XML"/>
>       <param name="context" value="default"/>
>       <!-- regex to stop dialing when it matches -->
>       <!--<param name="dial-regex" value="5555"/>-->
>       <!-- regex to stop dialing when it does not match -->
>       <!--<param name="fail-dial-regex" value="^5"/>-->
>     </span>
>
>
>   </analog_spans>
> </configuration>
>
>
>
>
> Anthony Minessale II
>
> FreeSWITCH http://www.freeswitch.org/
> ClueCon http://www.cluecon.com/
>
> AIM: anthm
> MSN:anthony_minessale at hotmail.com
> GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com
> IRC: irc.freenode.net #freeswitch
>
> FreeSWITCH Developer Conference
> sip:888 at conference.freeswitch.org
> iax:guest at conference.freeswitch.org/888
> googletalk:conf+888 at conference.freeswitch.org
> pstn:213-799-1400
>
>
> ----- Original Message ----
> From: Irshad Ahamed <irshad.fswitch at gmail.com >
> To: freeswitch-dev at lists.freeswitch.org; freeswitch-users at lists.freeswitch.org
> Sent: Wednesday, January 2, 2008 12:40:14 AM
> Subject: [Freeswitch-users] Not able to make an outgoing Call  
> through FXO....
>
> Hi,
>
> Wishing U all a very Happy n Prosperous New Year!!!!
>
> I am trying to make an outgoing call using FXO connected to an  
> external telephone line.
>
> Here is the set-up:
>
> 1. FXO connected to external telephone line
> 2. FXS connected to analog phone.
>
>
> The Openzap.conf @ /etc/openzap is as follows:
> [span zt]
> name => OpenZAP
> number => 1
> fxs-channel => 1
>
> [span zt]
> name => OpenZAP
> number => 1
> fxo-channel => 4
>
> The default.xml @  /usr/local/freeswitch/conf/dialplan is configured  
> for inward and outgoing calls on FXO as follows:
>
>   <extension name="outgoing-fxo">
>     <condition field="destination_number" expression="^(43)$">
>       <action application="bridge" data="openzap/2/1/43"/>
>     </condition>
>   </extension>
>
>   <extension name="incoming-fxo">
>     <condition field="destination_number" expression="^(35)$">
>       <action application="bridge" data="openzap/1/1"/>
>     </condition>
>   </extension>
>
> While Start-up Freeswitch following logs were seen:
>
> 2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config  
> for span
> 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span  
> 1 of type zt
> 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1  
> [name]=[OpenZAP]
> 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1  
> [number]=[1]
> 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [fxs- 
> channel]=[1]
> 2008-01-02 11:51:22 [DEBUG] zap_io.c:1850 load_config() setting  
> trunk type to 'FXS' start(KEWL)
> 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring  
> device /dev/zap/channel channel 1 as OpenZAP device 1:1 fd:31
> 2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config  
> for span
> 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span  
> 2 of type zt
> 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2  
> [name]=[OpenZAP]
> 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2  
> [number]=[1]
> 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [fxo- 
> channel]=[4]
> 2008-01-02 11:51:22 [DEBUG] zap_io.c:1839 load_config() setting  
> trunk type to 'FXO' start(KEWL)
> 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring  
> device /dev/zap/channel channel 4 as OpenZAP device 2:1 fd:32
> 2008-01-02 11:51:22 [INFO] zap_io.c:1881 load_config() Configured 2  
> channel(s)
> 2008-01-02 11:51:22 [CONSOLE] switch_loadable_module.c:748  
> switch_loadable_module_load_file() Successfully Loaded [mod_openzap]
>
> and while I made a call following logs were seen:
>
> 2008-01-02 12:04:16 [NOTICE] switch_core_state_machine.c:134  
> switch_core_standard_on_execute() Execute bridge(openzap/ 
> 2/1/43)2008-01-02 12:04:16 [DEBUG] mod_openzap.c:231 tech_init() Set  
> codec PCMU 20ms
> 2008-01-02 12:04:16 [NOTICE] switch_channel.c:392  
> switch_channel_set_name() New Chan OPENZAP/43 [e3630387-25d6-4031- 
> bf81-239c3e64e3fa]
> 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:802  
> channel_outgoing_channel() OPENZAP/43 State Change CS_NEW -> CS_INIT
> 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625  
> switch_core_session_signal_state_change() Kill OPENZAP/43 [BREAK]
> 2008-01-02 12:04:16 [ERR] zap_io.c:884 zap_channel_outgoing_call()  
> outgoing_call method not implemented!
> 2008-01-02 12:04:16 [NOTICE] mod_openzap.c:818  
> channel_outgoing_channel() Close Channel OPENZAP/43 [CS_INIT]
> 2008-01-02 12:04:16 [ERR] switch_ivr_originate.c:525  
> switch_ivr_originate() Cannot Create Outgoing Channel! cause:  
> DESTINATION_OUT_OF_ORDER
> 2008-01-02 12:04:16 [DEBUG] switch_ivr_originate.c:873  
> switch_ivr_originate() Originate Resulted in Error Cause: 27  
> [DESTINATION_OUT_OF_ORDER]
> 2008-01-02 12:04:16 [INFO] mod_dptools.c:1331  
> audio_bridge_function() Originate Failed.  Cause:  
> DESTINATION_OUT_OF_ORDER
> 2008-01-02 12:04:16 [NOTICE] mod_dptools.c:1358  
> audio_bridge_function() Hangup OpenZAP/43 [CS_EXECUTE]  
> [DESTINATION_OUT_OF_ORDER]
> 2008-01-02 12:04:16 [DEBUG] switch_channel.c:1071  
> switch_channel_perform_hangup() Kill OpenZAP/43 [KILL]
> 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625  
> switch_core_session_signal_state_change() Kill OpenZAP/43 [BREAK]
> 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:394  
> switch_core_session_run() (OpenZAP/43) State HANGUP
> 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:329 channel_on_hangup()  
> Changing state on 1:1 from IDLE to HANGUP
> 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:359 channel_on_hangup()  
> OpenZAP/43 CHANNEL HANGUP
> 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:45  
> switch_core_standard_on_hangup() Standard HANGUP OpenZAP/43, cause:  
> DESTINATION_OUT_OF_ORDER
> 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:683  
> switch_core_session_thread() Session 1 (OpenZAP/43) Locked, Waiting  
> on external entities
> 2008-01-02 12:04:16 [INFO] switch_core_session.c:689  
> switch_core_session_thread() Session 1 (OpenZAP/43) Ended
> 2008-01-02 12:04:16 [NOTICE] switch_core_session.c:691  
> switch_core_session_thread() Close Channel OpenZAP/43 [CS_HANGUP]
> 2008-01-02 12:04:16 [DEBUG] zap_analog.c:351  
> zap_analog_channel_run() Executing state handler on 1:1 for HANGUP
> 2008-01-02 12:04:17 [DEBUG] zap_analog.c:290  
> zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY
> 2008-01-02 12:04:17 [DEBUG] zap_analog.c:351  
> zap_analog_channel_run() Executing state handler on 1:1 for BUSY
> 2008-01-02 12:04:20 [DEBUG] zap_analog.c:664 process_event() EVENT  
> [ONHOOK][1:1] STATE [BUSY]
> 2008-01-02 12:04:20 [DEBUG] zap_analog.c:690 process_event()  
> Changing state on 1:1 from BUSY to DOWN
> 2008-01-02 12:04:20 [DEBUG] zap_analog.c:351  
> zap_analog_channel_run() Executing state handler on 1:1 for DOWN
> 2008-01-02 12:04:20 [DEBUG] mod_openzap.c:968 on_fxs_signal() got  
> FXS sig [STOP]
> 2008-01-02 12:04:20 [DEBUG] zap_analog.c:648  
> zap_analog_channel_run() ANALOG CHANNEL thread ended.
>
> Could anyone help me out in getting FXO working ???
>
> Thanks in advance...
>
> BR,
> Irshad.
>
>
>
> Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  
> Try it now.
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
>
> Looking for last minute shopping deals? Find them fast with Yahoo!  
> Search.
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20080109/3e24d996/attachment-0002.html 