[Freeswitch-users] Not able to make an outgoing Call through FXO....
Anthony Minessale
anthmct at yahoo.com
Fri Jan 4 10:30:18 PST 2008
I think it's waiting for a dialtone before it sends the digits
and then giving up because it can't fine one.
Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
AIM: anthm
MSN:anthony_minessale at hotmail.com
GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com
IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference
sip:888 at conference.freeswitch.org
iax:guest at conference.freeswitch.org/888
googletalk:conf+888 at conference.freeswitch.org
pstn:213-799-1400
----- Original Message ----
From: Irshad Ahamed <irshad.fswitch at gmail.com>
To: freeswitch-users at lists.freeswitch.org; freeswitch-dev at lists.freeswitch.org
Sent: Friday, January 4, 2008 4:24:07 AM
Subject: Re: [Freeswitch-users] Not able to make an outgoing Call through FXO....
Hi Anthony,
Thanks for the info. By adding the span-ID = 2 , I was able to receive an incoming call successfully.
The dialplan/default.xml is as below:
<extension name="incoming">
<condition field="destination_number" expression="^(1)$">
<action application="bridge" data="openzap/1/1"/>
<!--action application="bridge" data="openzap/1/1"/>-->
</condition>
</extension>
<extension name="outgoing-fxo">
<condition field="destination_number" expression="^(43)$">
<action application="bridge" data="openzap/2/1/43"/>
</condition>
</extension>
The Openzap.conf.xml looks like below:
<configuration name="openzap.conf" description="OpenZAP Configuration">
<settings>
<param name="debug" value="9"/>
</settings>
<analog_spans>
<span id="1">
<param name="tonegroup" value="us"/>
<param name="digit-timeout" value="2000"/>
<param name="max-digits" value="11"/>
<param name="dialplan" value="XML"/>
<param name="context" value="default"/>
<!-- regex to stop dialing when it matches -->
<!--<param name="dial-regex" value="5555"/>-->
<!-- regex to stop dialing when it does not match -->
<!--<param name="fail-dial-regex" value="^5"/>-->
</span>
<span id="2">
<param name="tonegroup" value="us"/>
<param name="digit-timeout" value="2000"/>
<param name="max-digits" value="1"/>
<param name="dialplan" value="XML"/>
<param name="context" value="default"/>
<!-- regex to stop dialing when it matches -->
<!--<param name="dial-regex" value="5555"/>-->
<!-- regex to stop dialing when it does not match -->
<!--<param name="fail-dial-regex" value="^5"/>-->
</span>
</analog_spans>
</configuration>
But still I am unable to make an Outgoing Call. Please have a look at the Freeswitch Log below:
2008-01-04 15:45:03 [DEBUG] zap_analog.c:664 process_event() EVENT [OFFHOOK][1:1] STATE [DOWN]
2008-01-04 15:45:03 [DEBUG] zap_analog.c:726 process_event() Changing state on 1:1 from DOWN to DIALTONE
2008-01-04 15:45:03 [DEBUG] zap_analog.c:184 zap_analog_channel_run() ANALOG CHANNEL thread starting.
2008-01-04 15:45:03 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DIALTONE
2008-01-04 15:45:07 [DEBUG] zap_analog.c:490 zap_analog_channel_run() DTMF 4
2008-01-04 15:45:07 [DEBUG] zap_analog.c:492 zap_analog_channel_run() Changing state on 1:1 from DIALTONE to COLLECT
2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [COLLECTED_DIGIT]
2008-01-04 15:45:07 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for COLLECT
2008-01-04 15:45:07 [DEBUG] zap_analog.c:490 zap_analog_channel_run() DTMF 2
2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [COLLECTED_DIGIT]
2008-01-04 15:45:09 [DEBUG] zap_analog.c:507 zap_analog_channel_run() Number obtained [42]
2008-01-04 15:45:09 [DEBUG] zap_analog.c:508 zap_analog_channel_run() Changing state on 1:1 from COLLECT to IDLE
2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for IDLE
2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [START]
2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms
2008-01-04 15:45:09 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OpenZAP/42 [8d46eb7f-4305-49e8-a4a5-eb97af3b696b]
2008-01-04 15:45:09 [DEBUG] mod_openzap.c:892 zap_channel_from_event() OpenZAP/42 State Change CS_NEW -> CS_INIT
2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK]
2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397 switch_core_session_run() (OpenZAP/42) State INIT
2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init() OpenZAP/42 State Change CS_INIT -> CS_RING
2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK]
2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (OpenZAP/42) State RING
2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring() OpenZAP/42 CHANNEL RING
2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:64 switch_core_standard_on_ring() Standard RING OpenZAP/42
2008-01-04 15:45:09 [INFO] mod_dialplan_xml.c:217 dialplan_hunt() Processing OpenZAP->42!
2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions ${numbering_plan}() =~ //
2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(1)$/
2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten() Regex mismatch
2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(43)$/
2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten() Regex mismatch
2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(42)$/
2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:273 dialplan_hunt() OpenZAP/42 State Change CS_RING -> CS_EXECUTE
2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK]
2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:406 switch_core_session_run() (OpenZAP/42) State EXECUTE
2008-01-04 15:45:09 [DEBUG] mod_openzap.c:294 channel_on_execute() OpenZAP/42 CHANNEL EXECUTE
2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:121 switch_core_standard_on_execute() Standard EXECUTE
2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute set(use_profile=${cond(${is_lan_addr(${network_addr})} == yes ? nat : default)})
2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158 switch_core_standard_on_execute() Expanded String set(use_profile=default)
2008-01-04 15:45:09 [DEBUG] mod_dptools.c:419 set_function() SET [use_profile]=[default]
2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute set_user(default@${domain})
2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158 switch_core_standard_on_execute() Expanded String set_user(
default at 192.168.2.51)
2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute info()
2008-01-04 15:45:09 [CRIT] mod_dptools.c:630 info_function() CHANNEL_DATA:
Channel-State: CS_EXECUTE
Channel-State-Number: 4
Channel-Name: OpenZAP/42
Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b
Channel-Read-Codec-Name: PCMU
Channel-Read-Codec-Rate: 8000
Channel-Write-Codec-Name: PCMU
Channel-Write-Codec-Rate: 8000
Caller-Username: OpenZAP
Caller-Dialplan: XML
Caller-Caller-ID-Name: OpenZAP
Caller-Caller-ID-Number: 1
Caller-Destination-Number: 42
Caller-Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b
Caller-Source: mod_openzap
Caller-Context: default
Caller-Channel-Name: OpenZAP/42
Caller-Channel-Created-Time: 1199441709953187
Caller-Channel-Answered-Time: 0
Caller-Channel-Hangup-Time: 0
Caller-Channel-Transfer-Time: 0
Caller-Screen-Bit: yes
Caller-Privacy-Hide-Name: no
Caller-Privacy-Hide-Number: no
variable_use_profile: default
variable_numbering_plan: US
variable_user_name: default
variable_domain_name:
192.168.2.51
2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute answer()
2008-01-04 15:45:09 [DEBUG] mod_openzap.c:663 channel_receive_message_fxs() Changing state on 1:1 from IDLE to UP
2008-01-04 15:45:09 [DEBUG] switch_core_session.c:339 switch_core_session_receive_message() Kill OpenZAP/42 [BREAK]
2008-01-04 15:45:09 [NOTICE] mod_dptools.c:361 answer_function() Channel [OpenZAP/42] has been answered
2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute bridge(openzap/2/1/42)2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms
2008-01-04 15:45:09 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OPENZAP/42 [bef803ed-e932-4a22-84e7-9131070fe771]
2008-01-04 15:45:09 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() OPENZAP/42 State Change CS_NEW -> CS_INIT
2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK]
2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for UP
2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [UP]
2008-01-04 15:45:09 [DEBUG] zap_analog.c:55 analog_fxo_outgoing_call() Changing state on 2:1 from DOWN to DIALING
2008-01-04 15:45:09 [DEBUG] zap_analog.c:184 zap_analog_channel_run() ANALOG CHANNEL thread starting.
2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for DIALING
2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397 switch_core_session_run() (OPENZAP/42) State INIT
2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init() OPENZAP/42 State Change CS_INIT -> CS_RING
2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK]
2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:625 switch_ivr_originate() Raw Codec Activation Success
L16 at 8000hz 1 channel 20ms
2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (OPENZAP/42) State RING
2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring() OPENZAP/42 CHANNEL RING
2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:48 originate_on_ring() OPENZAP/42 State Change CS_RING -> CS_HOLD
2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK]
2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OPENZAP/42) State HOLD
2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:204 switch_core_standard_on_hold() Standard HOLD
freeswitch at sipxpbx.oneconv.com>
freeswitch at sipxpbx.oneconv.com>
freeswitch at sipxpbx.oneconv.com> 2008-01-04 15:45:39 [DEBUG] zap_analog.c:244 zap_analog_channel_run() Changing state on 2:1 from DIALING to BUSY
2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for BUSY
2008-01-04 15:45:40 [DEBUG] zap_analog.c:467 zap_analog_channel_run() Changing state on 2:1 from BUSY to DOWN
2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for DOWN
2008-01-04 15:45:40 [DEBUG] mod_openzap.c:916 on_fxo_signal() got FXO sig 2:1 [STOP]
2008-01-04 15:45:40 [NOTICE] mod_openzap.c:934 on_fxo_signal() Hangup OPENZAP/42 [CS_HOLD] [NORMAL_CIRCUIT_CONGESTION]
2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OPENZAP/42 [KILL]
2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK]
2008-01-04 15:45:40 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended.
2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OPENZAP/42) State HANGUP
2008-01-04 15:45:40 [WARNING] mod_openzap.c:319 channel_on_hangup() VETO Changing state on 2:1 from DOWN to HANGUP
2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup() OPENZAP/42 CHANNEL HANGUP
2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OPENZAP/42, cause: NORMAL_CIRCUIT_CONGESTION
2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 4 (OPENZAP/42) Locked, Waiting on external entities
2008-01-04 15:45:40 [DEBUG] switch_ivr_originate.c:873 switch_ivr_originate() Originate Resulted in Error Cause: 34 [NORMAL_CIRCUIT_CONGESTION]
2008-01-04 15:45:40 [INFO] mod_dptools.c:1331 audio_bridge_function() Originate Failed. Cause: NORMAL_CIRCUIT_CONGESTION
2008-01-04 15:45:40 [NOTICE] mod_dptools.c:1358 audio_bridge_function() Hangup OpenZAP/42 [CS_EXECUTE] [NORMAL_CIRCUIT_CONGESTION]
2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OpenZAP/42 [KILL]
2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK]
2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OpenZAP/42) State HANGUP
2008-01-04 15:45:40 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing state on 1:1 from UP to HANGUP
2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/42 CHANNEL HANGUP
2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OpenZAP/42, cause: NORMAL_CIRCUIT_CONGESTION
2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 3 (OpenZAP/42) Locked, Waiting on external entities
2008-01-04 15:45:40 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 3 (OpenZAP/42) Ended
2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OpenZAP/42 [CS_HANGUP]
2008-01-04 15:45:40 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 4 (OPENZAP/42) Ended
2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OPENZAP/42 [CS_HANGUP]
2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for HANGUP
2008-01-04 15:45:40 [DEBUG] zap_analog.c:290 zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY
2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for BUSY
2008-01-04 15:45:53 [DEBUG] zap_analog.c:664 process_event() EVENT [ONHOOK][1:1] STATE [BUSY]
2008-01-04 15:45:53 [DEBUG] zap_analog.c:690 process_event() Changing state on 1:1 from BUSY to DOWN
2008-01-04 15:45:53 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DOWN
2008-01-04 15:45:53 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [STOP]
2008-01-04 15:45:53 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended.
Thanks,
Irshad.
On Jan 3, 2008 7:43 PM, Anthony Minessale <
anthmct at yahoo.com> wrote:
What does openzap.conf.xml look like?
Perhaps you are using the default which only has 1 span defined.
Try cloning the whole <span id="1"> block so there
is a span 1 and 2 like this:
<configuration name="
openzap.conf" description="OpenZAP Configuration">
<settings>
<param name="debug" value="0"/>
</settings>
<analog_spans>
<span id="1">
<param name="tonegroup" value="us"/>
<param name="digit-timeout" value="2000"/>
<param name="max-digits" value="11"/>
<param name="dialplan"
value="XML"/>
<param name="context" value="default"/>
<!-- regex to stop dialing when it matches -->
<!--<param name="dial-regex" value="5555"/>-->
<!-- regex to stop dialing when it does not match -->
<!--<param name="fail-dial-regex" value="^5"/>-->
</span>
<span id="2">
<param name="tonegroup" value="us"/>
<param name="digit-timeout" value="2000"/>
<param name="max-digits" value="11"/>
<param name="dialplan" value="XML"/>
<param name="context" value="default"/>
<!-- regex to stop dialing when it matches -->
<!--<param name="dial-regex" value="5555"/>-->
<!-- regex to stop dialing when it does not match -->
<!--<param name="fail-dial-regex" value="^5"/>-->
</span>
</analog_spans>
</configuration>
Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
AIM: anthm
MSN:anthony_minessale at hotmail.com
GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com
IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference
sip:888 at conference.freeswitch.org
iax:guest at conference.freeswitch.org/888
googletalk:conf+888 at conference.freeswitch.org
pstn:213-799-1400
----- Original Message ----
From: Irshad Ahamed <irshad.fswitch at gmail.com
>
To:
freeswitch-dev at lists.freeswitch.org; freeswitch-users at lists.freeswitch.org
Sent: Wednesday, January 2, 2008 12:40:14 AM
Subject: [Freeswitch-users] Not able to make an outgoing Call through FXO....
Hi,
Wishing U all a very Happy n Prosperous New Year!!!!
I am trying to make an outgoing call using FXO connected to an external telephone line.
Here is the set-up:
1. FXO connected to external telephone line
2. FXS connected to analog phone.
The Openzap.conf @ /etc/openzap is as follows:
[span zt]
name => OpenZAP
number => 1
fxs-channel => 1
[span zt]
name => OpenZAP
number => 1
fxo-channel => 4
The default.xml @ /usr/local/freeswitch/conf/dialplan is configured for inward and outgoing calls on FXO as follows:
<extension name="outgoing-fxo">
<condition field="destination_number" expression="^(43)$">
<action application="bridge" data="openzap/2/1/43"/>
</condition>
</extension>
<extension name="incoming-fxo">
<condition field="destination_number" expression="^(35)$">
<action application="bridge" data="openzap/1/1"/>
</condition>
</extension>
While Start-up Freeswitch following logs were seen:
2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for span
2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 1 of type zt
2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [name]=[OpenZAP]
2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [number]=[1]
2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [fxs-channel]=[1]
2008-01-02 11:51:22 [DEBUG] zap_io.c:1850 load_config() setting trunk type to 'FXS' start(KEWL)
2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device /dev/zap/channel channel 1 as OpenZAP device 1:1 fd:31
2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for span
2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 2 of type zt
2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [name]=[OpenZAP]
2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [number]=[1]
2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [fxo-channel]=[4]
2008-01-02 11:51:22 [DEBUG] zap_io.c:1839 load_config() setting trunk type to 'FXO' start(KEWL)
2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device /dev/zap/channel channel 4 as OpenZAP device 2:1 fd:32
2008-01-02 11:51:22 [INFO] zap_io.c:1881 load_config() Configured 2 channel(s)
2008-01-02 11:51:22 [CONSOLE] switch_loadable_module.c:748 switch_loadable_module_load_file() Successfully Loaded [mod_openzap]
and while I made a call following logs were seen:
2008-01-02 12:04:16 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute bridge(openzap/2/1/43)2008-01-02 12:04:16 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms
2008-01-02 12:04:16 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OPENZAP/43 [e3630387-25d6-4031-bf81-239c3e64e3fa]
2008-01-02 12:04:16 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() OPENZAP/43 State Change CS_NEW -> CS_INIT
2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/43 [BREAK]
2008-01-02 12:04:16 [ERR] zap_io.c:884 zap_channel_outgoing_call() outgoing_call method not implemented!
2008-01-02 12:04:16 [NOTICE] mod_openzap.c:818 channel_outgoing_channel() Close Channel OPENZAP/43 [CS_INIT]
2008-01-02 12:04:16 [ERR] switch_ivr_originate.c:525 switch_ivr_originate() Cannot Create Outgoing Channel! cause: DESTINATION_OUT_OF_ORDER
2008-01-02 12:04:16 [DEBUG] switch_ivr_originate.c:873 switch_ivr_originate() Originate Resulted in Error Cause: 27 [DESTINATION_OUT_OF_ORDER]
2008-01-02 12:04:16 [INFO] mod_dptools.c:1331 audio_bridge_function() Originate Failed. Cause: DESTINATION_OUT_OF_ORDER
2008-01-02 12:04:16 [NOTICE] mod_dptools.c:1358 audio_bridge_function() Hangup OpenZAP/43 [CS_EXECUTE] [DESTINATION_OUT_OF_ORDER]
2008-01-02 12:04:16 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OpenZAP/43 [KILL]
2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/43 [BREAK]
2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OpenZAP/43) State HANGUP
2008-01-02 12:04:16 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing state on 1:1 from IDLE to HANGUP
2008-01-02 12:04:16 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/43 CHANNEL HANGUP
2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OpenZAP/43, cause: DESTINATION_OUT_OF_ORDER
2008-01-02 12:04:16 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 1 (OpenZAP/43) Locked, Waiting on external entities
2008-01-02 12:04:16 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 1 (OpenZAP/43) Ended
2008-01-02 12:04:16 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OpenZAP/43 [CS_HANGUP]
2008-01-02 12:04:16 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for HANGUP
2008-01-02 12:04:17 [DEBUG] zap_analog.c:290 zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY
2008-01-02 12:04:17 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for BUSY
2008-01-02 12:04:20 [DEBUG] zap_analog.c:664 process_event() EVENT [ONHOOK][1:1] STATE [BUSY]
2008-01-02 12:04:20 [DEBUG] zap_analog.c:690 process_event() Changing state on 1:1 from BUSY to DOWN
2008-01-02 12:04:20 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DOWN
2008-01-02 12:04:20 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [STOP]
2008-01-02 12:04:20 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended.
Could anyone help me out in getting FXO working ???
Thanks in advance...
BR,
Irshad.
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20080104/4905a6f9/attachment-0002.html
More information about the FreeSWITCH-users
mailing list