[Freeswitch-users] Configuration

[Brian West]

Btw if you put back the config to the default. It will work because  
the ip is the domain and the packet don't loop thur your nat router  
needlessly.

/b

Sent from my iPhone

On Jan 8, 2008, at 7:39 AM, Jonas Gauffin <jonas.gauffin at gmail.com>  
wrote:

>>> * I only get audio one way when dialing from one registered UA to
>>> another, check attached log internal_call.log
>>
>> Chances are mydomain.com is your public IP right? and I suspect NAT  
>> is
>> involved?  If so then you need to setup a profile for Natted phones
>> behind the same nat.  One profile for phones outside the nat to
>> register with FreeSWITCH ... and the public one listed below.
>>
>
> mydomain.com points on my public ip, correct. The phones and FS are
> behind a router (on the same lan).
> FS have loaded the three profiles (nat, default and outbound). I have
> made no changes to them.
> Currently I have just tested with phones that is on the same lan as  
> FS.
>
> here is a registration trans:
>
>   REGISTER sip:mydomain.com SIP/2.0
>   Via: SIP/2.0/UDP
> 192.168.1.123: 
> 5060;rport;branch=z9hG4bK6f95bcc8e01f69dda9f5ebf92adc2c93
>   From: <sip:tobbe at mydomain.com>;tag=66055002
>   To: <sip:tobbe at mydomain.com>
>   Call-ID: 58ee65fb0b696f5a370d839058387f2c at 192.168.1.123
>   Contact: <sip:tobbe at 192.168.1.123:5060>
>   CSeq: 53 REGISTER
>   Expires: 300
>   Authorization: Digest username="tobbe",realm="mydomain.com",[...
> some info stripped out
> ...],uri="sip:mydomain.com",nc=00000001,algorithm=MD5
>   User-Agent: CMI CM5K
>   Content-Length: 0
>
> tobbe has user_context set to "default" in conf/directory/default/ 
> tobbe.xml
>
>>
>>>
>>>
>>> * Inbound external calls do not work, i get [407][Proxy
>>> Authentication Required], check log external_call.log
>>
>> This is why you need to start another profile to accept calls from  
>> the
>> outside world with authentication turned off.  That would fix that
>> problem.
>
> well. the nat profile exists and it has auth_calls set to false. but
> maybe it isnt used in my config?
>
>>
>> I honestly like having multiple UA's it solves many problems.
>>
>
> what do u mean by that? I'm using multiple UA's, all of them are
> currently on the same LAN as FS right now (testing enviroment), but
> later on, they may also be elsewhere.
> But currently I'm trying to get two UA's to be able to talk with each
> other (as I said, the audio is just going one way).
>
> And I'm not saying that it's one UA to rule them all.. =) I'm just
> trying to understand this all new configuration how a profile is
> selected (for inbound/outbound external calls, internal calls,
> internal registration (on the same lan as FS) and external
> registration (not on the same lan as FS)).
>
> thanks,
>  jonas
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org