[Freeswitch-users] T1 RBS Support Revisited
Dennis D Hock
hockd at dteenergy.com
Fri Aug 22 05:11:00 EDT 2008
Rob I believe you have the grasp of RBS. It has nothing to do with MF or the type of signaling per se but rather the encoding of the signaling as you have described it here.
Dennis Hock
-----freeswitch-users-bounces at lists.freeswitch.org wrote: -----
To: freeswitch-users at lists.freeswitch.org
From: Robert Dyck <rob.dyck at telus.net>
Sent by: freeswitch-users-bounces at lists.freeswitch.org
Date: 08/21/2008 11:08PM
Subject: Re: [Freeswitch-users] T1 RBS Support Revisited
If RBS means robbed bit signalling then it is transmitted in the media bit
stream but as the name implies it is not used for media. If I remember
correctly the LSB from every sixth frame is robbed leaving 7 bits and 1 faked
which would probably be correct about 50% of the time. RBS introduces a small
amount of distortion. The channel bank will use the state of the signalling
bit to set the M lead (on or offhook ) of the appropriate channel. The E lead
sets the signalling bit for the other direction. Think Ear and Mouth.
MF of course is encoded into the bit stream the same as any other audio
source. To avoid RBS, on/offhook can be transmitted using SF ( 2600 HZ ) in
band. You would want to disable RBS in that case. Compatible equipment is
required obviously.
On Thursday 21 August 2008, Brian West wrote:
> Isn't RBS more than just MF? Unless I'm forgetting something you rob
> a bit.
>
> /b
>
> On Aug 21, 2008, at 7:44 PM, John Wehle wrote:
> >> Is there support in FreeSWITCH for MF?
> >
> > To answer my own question ...
> >
> > Perhaps I can add a ZAP_COMMAND_SEND_MF case to zap_channel_command
> > patterned after ZAP_COMMAND_SEND_DTMF and just use teletone_set_tone
> > to set the proper frequencies???
> >
> > -- John
> > -------------------------------------------------------------------------
> >
> > | Feith Systems | Voice: 1-215-646-8000 | Email:
> >
> > john at feith.com |
> >
> > | John Wehle | Fax: 1-215-540-5495
> >
> > -------------------------------------------------------------------------
> >
> >
> > _______________________________________________
> > Freeswitch-users mailing list
> > Freeswitch-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
>
> Brian West
> sip:brian at freeswitch.org
>
>
>
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20080822/216a4472/attachment.html
More information about the Freeswitch-users
mailing list