[Freeswitch-users] [Freeswitch-dev] Porting to Blackfin

Tamas jalsot at gmail.com
Tue Aug 14 13:36:42 PDT 2007


Hi,

I use the blackfin.uclinux.org toolchain and I'm happy with. I tried
astfin at the beginning but I lost interest when I wasn't able to
compile anything and there were no svn updates for a longer time. This
might be my fault as I had not much experience with cross-compiling
those times.
Now I have callweaver compiled under uclinux toolchain and trying to
stabilize and move forward a bit (I still have to learn much, however)
on the blackfin.uclinux.org environment.

Now I'm trying to build freeswitch with more or less success. Lately I
got till compiling sqlite.

As I will out of work for a while (till the end of August) I won't be
able to work on this hobby project, but later we can continue
discussions on helping each other...

Regards,
    Tamas

Wojciech Tryc írta:
> Tamas,
> Not much was really done, we are all busy with other projects.
> However, I agree that we should combine our efforts and start moving.
> I would suggest to use the astfin tree as it's relatively easy to
> modify to add additional components. Astfin is currently using the
> latest released toolchain and uClinux (with several patches from svn).
> Astfin would also allow to use BlackfinOne, IP04, 4FX and PR1 hardware
> as those boards are already defined
> I can create a custom branch for freeswitch and we could start from
> there, please provide me with your sourceforge user ID and I will add
> you to the project.
>
> Cheers,
> Wojtek
>
> ----- Original Message ----- From: "Tamas" <jalsot at gmail.com>
> To: <freeswitch-dev at lists.freeswitch.org>
> Cc: "Wojciech Tryc" <wojtek at voipman.org>;
> <freeswitch-users at lists.freeswitch.org>
> Sent: Wednesday, August 08, 2007 5:09 AM
> Subject: Re: [Freeswitch-dev] Porting to Blackfin
>
>
>>
>> Hi,
>>
>> I'm interested in porting FS to Blackfin. I'm working on it, but wasn't
>> able to compile yet. It would be good to join forces and make it
>> reality.
>>
>> My current state:
>> I got over the configuration processes and APR compiled, but I have
>> issues compiling sqlite (in FS trunk) - I have an external sqlite-3.4.1
>> compiled for bfin but don't know how to tell FS to use that one (I use
>> the --disable-tcl --enable-threadsafe switches)
>> I'm compiling for BF537-STAMP board.
>>
>> How far did you get? Which toolchain do you use?
>>
>> Kind regards,
>>    Tamas
>>
>> Shidan írta:
>>> So far srtp and a few smaller packages. We are working on sophia now.
>>> What have other people done so far with Freeswitch on the blackfin?
>>>
>>> On 6/5/07, Wojciech Tryc <wojtek at voipman.org> wrote:
>>>
>>>> Hi,
>>>> How far did you get? I am the primary developer on astfin which is
>>>> basically
>>>> asterisk for blackfin.
>>>> We are basically supporting David's ip04, as well as blackfin one,
>>>> stamp and
>>>> our own baby PR1.
>>>>
>>>> Cheers,
>>>> Wojtek
>>>> ----- Original Message -----
>>>> From: "Shidan" <shidan at gmail.com>
>>>> To: <freeswitch-dev at lists.freeswitch.org>;
>>>> <freeswitch-users at lists.freeswitch.org>
>>>> Sent: Tuesday, June 05, 2007 11:19 AM
>>>> Subject: [Freeswitch-dev] Porting to Blackfin
>>>>
>>>>
>>>>
>>>>> Hi list,
>>>>>
>>>>> If any of you are interested in porting Freeswitch to
>>>>> Blackfin/uClinux. then please contact me. We have started actively
>>>>> working on this project and would like to set up a conference call to
>>>>> talk about possible collaboration with others and a roadmap.
>>>>>
>>>>> Regards,
>>>>> Shidan Gouran
>>>>> Jazinga Inc.
>>>>>
>>
>
>





More information about the FreeSWITCH-users mailing list