[Freeswitch-trunk] [commit] r13729 - in freeswitch/trunk/libs: pcre win32/pcre

[FreeSWITCH SVN]

Author: mikej
Date: Tue Jun  9 12:35:48 2009
New Revision: 13729

Log:
fix msvc pcre build for pcre 7.9

Modified:
   freeswitch/trunk/libs/pcre/pcre_ucp_searchfuncs.c
   freeswitch/trunk/libs/win32/pcre/config.h
   freeswitch/trunk/libs/win32/pcre/dftables.c
   freeswitch/trunk/libs/win32/pcre/libpcre.2008.vcproj
   freeswitch/trunk/libs/win32/pcre/libpcre.vcproj
   freeswitch/trunk/libs/win32/pcre/pcre_chartables.c.2008.vcproj
   freeswitch/trunk/libs/win32/pcre/pcre_chartables.c.vcproj

Modified: freeswitch/trunk/libs/pcre/pcre_ucp_searchfuncs.c
==============================================================================
--- freeswitch/trunk/libs/pcre/pcre_ucp_searchfuncs.c	(original)
+++ freeswitch/trunk/libs/pcre/pcre_ucp_searchfuncs.c	Tue Jun  9 12:35:48 2009
@@ -41,6 +41,10 @@
 /* This module contains code for searching the table of Unicode character
 properties. */
 
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
 #include "pcre_internal.h"
 
 #include "ucp.h"               /* Category definitions */

Modified: freeswitch/trunk/libs/win32/pcre/config.h
==============================================================================
--- freeswitch/trunk/libs/win32/pcre/config.h	(original)
+++ freeswitch/trunk/libs/win32/pcre/config.h	Tue Jun  9 12:35:48 2009
@@ -1,159 +1,313 @@
+/* config.h.  Generated from config.h.in by configure.  */
+/* config.h.in.  Generated from configure.ac by autoheader.  */
 
-/* On Unix-like systems config.in is converted by "configure" into config.h.
+
+/* On Unix-like systems config.h.in is converted by "configure" into config.h.
 Some other environments also support the use of "configure". PCRE is written in
 Standard C, but there are a few non-standard things it can cope with, allowing
 it to run on SunOS4 and other "close to standard" systems.
 
-On a non-Unix-like system you should just copy this file into config.h, and set
-up the macros the way you need them. You should normally change the definitions
-of HAVE_STRERROR and HAVE_MEMMOVE to 1. Unfortunately, because of the way
-autoconf works, these cannot be made the defaults. If your system has bcopy()
-and not memmove(), change the definition of HAVE_BCOPY instead of HAVE_MEMMOVE.
-If your system has neither bcopy() nor memmove(), leave them both as 0; an
-emulation function will be used. */
+If you are going to build PCRE "by hand" on a system without "configure" you
+should copy the distributed config.h.generic to config.h, and then set up the
+macro definitions the way you need them. You must then add -DHAVE_CONFIG_H to
+all of your compile commands, so that config.h is included at the start of
+every source.
+
+Alternatively, you can avoid editing by using -D on the compiler command line
+to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H.
+
+PCRE uses memmove() if HAVE_MEMMOVE is set to 1; otherwise it uses bcopy() if
+HAVE_BCOPY is set to 1. If your system has neither bcopy() nor memmove(), set
+them both to 0; an emulation function will be used. */
+
+/* By default, the \R escape sequence matches any Unicode line ending
+   character or sequence of characters. If BSR_ANYCRLF is defined, this is
+   changed so that backslash-R matches only CR, LF, or CRLF. The build- time
+   default can be overridden by the user of PCRE at runtime. On systems that
+   support it, "configure" can be used to override the default. */
+/* #undef BSR_ANYCRLF */
 
 /* If you are compiling for a system that uses EBCDIC instead of ASCII
-character codes, define this macro as 1. On systems that can use "configure",
-this can be done via --enable-ebcdic. */
+   character codes, define this macro as 1. On systems that can use
+   "configure", this can be done via --enable-ebcdic. PCRE will then assume
+   that all input strings are in EBCDIC. If you do not define this macro, PCRE
+   will assume input strings are ASCII or UTF-8 Unicode. It is not possible to
+   build a version of PCRE that supports both EBCDIC and UTF-8. */
+/* #undef EBCDIC */
 
-#ifndef EBCDIC
-#define EBCDIC 0
+/* Define to 1 if you have the `bcopy' function. */
+#ifndef HAVE_BCOPY
+#define HAVE_BCOPY 1
 #endif
 
-/* If you are compiling for a system other than a Unix-like system or Win32,
-and it needs some magic to be inserted before the definition of a function that
-is exported by the library, define this macro to contain the relevant magic. If
-you do not define this macro, it defaults to "extern" for a C compiler and
-"extern C" for a C++ compiler on non-Win32 systems. This macro apears at the
-start of every exported function that is part of the external API. It does not
-appear on functions that are "external" in the C sense, but which are internal
-to the library. */
+/* Define to 1 if you have the <bits/type_traits.h> header file. */
+/* #undef HAVE_BITS_TYPE_TRAITS_H */
 
-/* #define PCRE_DATA_SCOPE */
+/* Define to 1 if you have the <bzlib.h> header file. */
+#ifndef HAVE_BZLIB_H
+#define HAVE_BZLIB_H 1
+#endif
 
-/* Define the following macro to empty if the "const" keyword does not work. */
+/* Define to 1 if you have the <dirent.h> header file. */
+#ifndef HAVE_DIRENT_H
+#define HAVE_DIRENT_H 1
+#endif
 
-/* #undef const */
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#ifndef HAVE_DLFCN_H
+#define HAVE_DLFCN_H 1
+#endif
 
-/* Define the following macro to "unsigned" if <stddef.h> does not define
-size_t. */
+/* Define to 1 if you have the <inttypes.h> header file. */
+#ifndef HAVE_INTTYPES_H
+#define HAVE_INTTYPES_H 1
+#endif
 
-/* #undef size_t */
+/* Define to 1 if you have the <limits.h> header file. */
+#ifndef HAVE_LIMITS_H
+#define HAVE_LIMITS_H 1
+#endif
 
-/* The following two definitions are mainly for the benefit of SunOS4, which
-does not have the strerror() or memmove() functions that should be present in
-all Standard C libraries. The macros HAVE_STRERROR and HAVE_MEMMOVE should
-normally be defined with the value 1 for other systems, but unfortunately we
-cannot make this the default because "configure" files generated by autoconf
-will only change 0 to 1; they won't change 1 to 0 if the functions are not
-found. */
+/* Define to 1 if the system has the type `long long'. */
+#ifndef HAVE_LONG_LONG
+#define HAVE_LONG_LONG 1
+#endif
 
-#define HAVE_STRERROR 1
+/* Define to 1 if you have the `memmove' function. */
+#ifndef HAVE_MEMMOVE
 #define HAVE_MEMMOVE 1
-#define HAVE_WIN32API 1
+#endif
 
-/* There are some non-Unix-like systems that don't even have bcopy(). If this
-macro is false, an emulation is used. If HAVE_MEMMOVE is set to 1, the value of
-HAVE_BCOPY is not relevant. */
+/* Define to 1 if you have the <memory.h> header file. */
+#ifndef HAVE_MEMORY_H
+#define HAVE_MEMORY_H 1
+#endif
 
-#define HAVE_BCOPY 1
+/* Define to 1 if you have the <readline/history.h> header file. */
+#ifndef HAVE_READLINE_HISTORY_H
+#define HAVE_READLINE_HISTORY_H 1
+#endif
 
-/* The value of NEWLINE determines the newline character. The default is to
-leave it up to the compiler, but some sites want to force a particular value.
-On Unix-like systems, "configure" can be used to override this default. */
+/* Define to 1 if you have the <readline/readline.h> header file. */
+#ifndef HAVE_READLINE_READLINE_H
+#define HAVE_READLINE_READLINE_H 1
+#endif
 
-#ifndef NEWLINE
-#define NEWLINE '\n'
+/* Define to 1 if you have the <stdint.h> header file. */
+#ifndef HAVE_STDINT_H
+#define HAVE_STDINT_H 1
 #endif
 
-/* The value of LINK_SIZE determines the number of bytes used to store links as
-offsets within the compiled regex. The default is 2, which allows for compiled
-patterns up to 64K long. This covers the vast majority of cases. However, PCRE
-can also be compiled to use 3 or 4 bytes instead. This allows for longer
-patterns in extreme cases. On systems that support it, "configure" can be used
-to override this default. */
+/* Define to 1 if you have the <stdlib.h> header file. */
+#ifndef HAVE_STDLIB_H
+#define HAVE_STDLIB_H 1
+#endif
 
-#ifndef LINK_SIZE
-#define LINK_SIZE   2
+/* Define to 1 if you have the `strerror' function. */
+#ifndef HAVE_STRERROR
+#define HAVE_STRERROR 1
 #endif
 
-/* When calling PCRE via the POSIX interface, additional working storage is
-required for holding the pointers to capturing substrings because PCRE requires
-three integers per substring, whereas the POSIX interface provides only two. If
-the number of expected substrings is small, the wrapper function uses space on
-the stack, because this is faster than using malloc() for each call. The
-threshold above which the stack is no longer used is defined by POSIX_MALLOC_
-THRESHOLD. On systems that support it, "configure" can be used to override this
-default. */
+/* Define to 1 if you have the <string> header file. */
+#ifndef HAVE_STRING
+#define HAVE_STRING 1
+#endif
 
-#ifndef POSIX_MALLOC_THRESHOLD
-#define POSIX_MALLOC_THRESHOLD 10
+/* Define to 1 if you have the <strings.h> header file. */
+#ifndef HAVE_STRINGS_H
+#define HAVE_STRINGS_H 1
 #endif
 
-/* PCRE uses recursive function calls to handle backtracking while matching.
-This can sometimes be a problem on systems that have stacks of limited size.
-Define NO_RECURSE to get a version that doesn't use recursion in the match()
-function; instead it creates its own stack by steam using pcre_recurse_malloc()
-to obtain memory from the heap. For more detail, see the comments and other
-stuff just above the match() function. On systems that support it, "configure"
-can be used to set this in the Makefile (use --disable-stack-for-recursion). */
-
-/* #define NO_RECURSE */
-
-/* The value of MATCH_LIMIT determines the default number of times the internal
-match() function can be called during a single execution of pcre_exec(). There
-is a runtime interface for setting a different limit. The limit exists in order
-to catch runaway regular expressions that take for ever to determine that they
-do not match. The default is set very large so that it does not accidentally
-catch legitimate cases. On systems that support it, "configure" can be used to
-override this default default. */
+/* Define to 1 if you have the <string.h> header file. */
+#ifndef HAVE_STRING_H
+#define HAVE_STRING_H 1
+#endif
+
+/* Define to 1 if you have the `strtoll' function. */
+/* #undef HAVE_STRTOLL */
+
+/* Define to 1 if you have the `strtoq' function. */
+#ifndef HAVE_STRTOQ
+#define HAVE_STRTOQ 1
+#endif
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#ifndef HAVE_SYS_STAT_H
+#define HAVE_SYS_STAT_H 1
+#endif
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#ifndef HAVE_SYS_TYPES_H
+#define HAVE_SYS_TYPES_H 1
+#endif
 
+/* Define to 1 if you have the <type_traits.h> header file. */
+/* #undef HAVE_TYPE_TRAITS_H */
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#ifndef HAVE_UNISTD_H
+#define HAVE_UNISTD_H 1
+#endif
+
+/* Define to 1 if the system has the type `unsigned long long'. */
+#ifndef HAVE_UNSIGNED_LONG_LONG
+#define HAVE_UNSIGNED_LONG_LONG 1
+#endif
+
+/* Define to 1 if you have the <windows.h> header file. */
+#define HAVE_WINDOWS_H 1
+
+/* Define to 1 if you have the <zlib.h> header file. */
+#ifndef HAVE_ZLIB_H
+#define HAVE_ZLIB_H 1
+#endif
+
+/* Define to 1 if you have the `_strtoi64' function. */
+/* #undef HAVE__STRTOI64 */
+
+/* The value of LINK_SIZE determines the number of bytes used to store links
+   as offsets within the compiled regex. The default is 2, which allows for
+   compiled patterns up to 64K long. This covers the vast majority of cases.
+   However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows
+   for longer patterns in extreme cases. On systems that support it,
+   "configure" can be used to override this default. */
+#ifndef LINK_SIZE
+#define LINK_SIZE 2
+#endif
+
+/* The value of MATCH_LIMIT determines the default number of times the
+   internal match() function can be called during a single execution of
+   pcre_exec(). There is a runtime interface for setting a different limit.
+   The limit exists in order to catch runaway regular expressions that take
+   for ever to determine that they do not match. The default is set very large
+   so that it does not accidentally catch legitimate cases. On systems that
+   support it, "configure" can be used to override this default default. */
 #ifndef MATCH_LIMIT
 #define MATCH_LIMIT 10000000
 #endif
 
 /* The above limit applies to all calls of match(), whether or not they
-increase the recursion depth. In some environments it is desirable to limit the
-depth of recursive calls of match() more strictly, in order to restrict the
-maximum amount of stack (or heap, if NO_RECURSE is defined) that is used. The
-value of MATCH_LIMIT_RECURSION applies only to recursive calls of match(). To
-have any useful effect, it must be less than the value of MATCH_LIMIT. There is
-a runtime method for setting a different limit. On systems that support it,
-"configure" can be used to override this default default. */
-
+   increase the recursion depth. In some environments it is desirable to limit
+   the depth of recursive calls of match() more strictly, in order to restrict
+   the maximum amount of stack (or heap, if NO_RECURSE is defined) that is
+   used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of
+   match(). To have any useful effect, it must be less than the value of
+   MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is
+   a runtime method for setting a different limit. On systems that support it,
+   "configure" can be used to override the default. */
 #ifndef MATCH_LIMIT_RECURSION
 #define MATCH_LIMIT_RECURSION MATCH_LIMIT
 #endif
 
-/* These three limits are parameterized just in case anybody ever wants to
-change them. Care must be taken if they are increased, because they guard
-against integer overflow caused by enormously large patterns. */
+/* This limit is parameterized just in case anybody ever wants to change it.
+   Care must be taken if it is increased, because it guards against integer
+   overflow caused by enormously large patterns. */
+#ifndef MAX_NAME_COUNT
+#define MAX_NAME_COUNT 10000
+#endif
 
+/* This limit is parameterized just in case anybody ever wants to change it.
+   Care must be taken if it is increased, because it guards against integer
+   overflow caused by enormously large patterns. */
 #ifndef MAX_NAME_SIZE
 #define MAX_NAME_SIZE 32
 #endif
 
-#ifndef MAX_NAME_COUNT
-#define MAX_NAME_COUNT 10000
+/* The value of NEWLINE determines the newline character sequence. On systems
+   that support it, "configure" can be used to override the default, which is
+   10. The possible values are 10 (LF), 13 (CR), 3338 (CRLF), -1 (ANY), or -2
+   (ANYCRLF). */
+#ifndef NEWLINE
+#define NEWLINE 10
 #endif
 
-#ifndef MAX_DUPLENGTH
-#define MAX_DUPLENGTH 30000
-#endif
+/* PCRE uses recursive function calls to handle backtracking while matching.
+   This can sometimes be a problem on systems that have stacks of limited
+   size. Define NO_RECURSE to get a version that doesn't use recursion in the
+   match() function; instead it creates its own stack by steam using
+   pcre_recurse_malloc() to obtain memory from the heap. For more detail, see
+   the comments and other stuff just above the match() function. On systems
+   that support it, "configure" can be used to set this in the Makefile (use
+   --disable-stack-for-recursion). */
+/* #undef NO_RECURSE */
+
+/* Name of package */
+#define PACKAGE "pcre"
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT ""
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "PCRE"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "PCRE 7.9"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "pcre"
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "7.9"
+
+
+/* If you are compiling for a system other than a Unix-like system or
+   Win32, and it needs some magic to be inserted before the definition
+   of a function that is exported by the library, define this macro to
+   contain the relevant magic. If you do not define this macro, it
+   defaults to "extern" for a C compiler and "extern C" for a C++
+   compiler on non-Win32 systems. This macro apears at the start of
+   every exported function that is part of the external API. It does
+   not appear on functions that are "external" in the C sense, but
+   which are internal to the library. */
+/* #undef PCRE_EXP_DEFN */
 
-#ifndef INVALID_FILE_ATTRIBUTES
-#define INVALID_FILE_ATTRIBUTES (-1L)
+/* Define if linking statically (TODO: make nice with Libtool) */
+/* #undef PCRE_STATIC */
+
+/* When calling PCRE via the POSIX interface, additional working storage is
+   required for holding the pointers to capturing substrings because PCRE
+   requires three integers per substring, whereas the POSIX interface provides
+   only two. If the number of expected substrings is small, the wrapper
+   function uses space on the stack, because this is faster than using
+   malloc() for each call. The threshold above which the stack is no longer
+   used is defined by POSIX_MALLOC_THRESHOLD. On systems that support it,
+   "configure" can be used to override this default. */
+#ifndef POSIX_MALLOC_THRESHOLD
+#define POSIX_MALLOC_THRESHOLD 10
 #endif
 
-#if (_MSC_VER >= 1400) // VC8+
-#ifndef _CRT_SECURE_NO_DEPRECATE
-#define _CRT_SECURE_NO_DEPRECATE
+/* Define to 1 if you have the ANSI C header files. */
+#ifndef STDC_HEADERS
+#define STDC_HEADERS 1
 #endif
-#ifndef _CRT_NONSTDC_NO_DEPRECATE
-#define _CRT_NONSTDC_NO_DEPRECATE
+
+/* Define to allow pcregrep to be linked with libbz2, so that it is able to
+   handle .bz2 files. */
+/* #undef SUPPORT_LIBBZ2 */
+
+/* Define to allow pcretest to be linked with libreadline. */
+/* #undef SUPPORT_LIBREADLINE */
+
+/* Define to allow pcregrep to be linked with libz, so that it is able to
+   handle .gz files. */
+/* #undef SUPPORT_LIBZ */
+
+/* Define to enable support for Unicode properties */
+/* #undef SUPPORT_UCP */
+
+/* Define to enable support for the UTF-8 Unicode encoding. This will work
+   even in an EBCDIC environment, but it is incompatible with the EBCDIC
+   macro. That is, PCRE can support *either* EBCDIC code *or* ASCII/UTF-8, but
+   not both at once. */
+/* #undef SUPPORT_UTF8 */
+
+/* Version number of package */
+#ifndef VERSION
+#define VERSION "7.9"
 #endif
-#endif // VC8+
 
-#pragma warning(disable: 4005 4003 4018)
+/* Define to empty if `const' does not conform to ANSI C. */
+/* #undef const */
 
-/* End */
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+/* #undef size_t */

Modified: freeswitch/trunk/libs/win32/pcre/dftables.c
==============================================================================
--- freeswitch/trunk/libs/win32/pcre/dftables.c	(original)
+++ freeswitch/trunk/libs/win32/pcre/dftables.c	Tue Jun  9 12:35:48 2009
@@ -6,7 +6,7 @@
 and semantics are as close as possible to those of the Perl 5 language.
 
                        Written by Philip Hazel
-           Copyright (c) 1997-2005 University of Cambridge
+           Copyright (c) 1997-2008 University of Cambridge
 
 -----------------------------------------------------------------------------
 Redistribution and use in source and binary forms, with or without
@@ -38,14 +38,19 @@
 */
 
 
-/* This is a freestanding support program to generate a file containing default
-character tables for PCRE. The tables are built according to the default C
+/* This is a freestanding support program to generate a file containing
+character tables for PCRE. The tables are built according to the current
 locale. Now that pcre_maketables is a function visible to the outside world, we
 make use of its code from here in order to be consistent. */
 
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
 #include <ctype.h>
 #include <stdio.h>
 #include <string.h>
+#include <locale.h>
 
 #include "pcre_internal.h"
 
@@ -55,38 +60,60 @@
 
 int main(int argc, char **argv)
 {
-int i;
 FILE *f;
-const unsigned char *tables = pcre_maketables();
-const unsigned char *base_of_tables = tables;
+int i = 1;
+const unsigned char *tables;
+const unsigned char *base_of_tables;
+
+/* By default, the default C locale is used rather than what the building user
+happens to have set. However, if the -L option is given, set the locale from
+the LC_xxx environment variables. */
 
-if (argc != 2)
+if (argc > 1 && strcmp(argv[1], "-L") == 0)
+  {
+  setlocale(LC_ALL, "");        /* Set from environment variables */
+  i++;
+  }
+
+if (argc < i + 1)
   {
   fprintf(stderr, "dftables: one filename argument is required\n");
   return 1;
   }
 
-f = fopen(argv[1], "wb");
+tables = pcre_maketables();
+base_of_tables = tables;
+
+f = fopen(argv[i], "wb");
 if (f == NULL)
   {
   fprintf(stderr, "dftables: failed to open %s for writing\n", argv[1]);
   return 1;
   }
 
-/* There are two fprintf() calls here, because gcc in pedantic mode complains
-about the very long string otherwise. */
+/* There are several fprintf() calls here, because gcc in pedantic mode
+complains about the very long string otherwise. */
 
 fprintf(f,
   "/*************************************************\n"
   "*      Perl-Compatible Regular Expressions       *\n"
   "*************************************************/\n\n"
-  "/* This file is automatically written by the dftables auxiliary \n"
-  "program. If you edit it by hand, you might like to edit the Makefile to \n"
-  "prevent its ever being regenerated.\n\n");
+  "/* This file was automatically written by the dftables auxiliary\n"
+  "program. It contains character tables that are used when no external\n"
+  "tables are passed to PCRE by the application that calls it. The tables\n"
+  "are used only for characters whose code values are less than 256.\n\n");
+fprintf(f,
+  "The following #includes are present because without them gcc 4.x may remove\n"
+  "the array definition from the final binary if PCRE is built into a static\n"
+  "library and dead code stripping is activated. This leads to link errors.\n"
+  "Pulling in the header ensures that the array gets flagged as \"someone\n"
+  "outside this compilation unit might reference this\" and so it will always\n"
+  "be supplied to the linker. */\n\n"
+  "#ifdef HAVE_CONFIG_H\n"
+  "#include \"config.h\"\n"
+  "#endif\n\n"
+  "#include \"pcre_internal.h\"\n\n");
 fprintf(f,
-  "This file contains the default tables for characters with codes less than\n"
-  "128 (ASCII characters). These tables are used when no external tables are\n"
-  "passed to PCRE. */\n\n"
   "const unsigned char _pcre_default_tables[] = {\n\n"
   "/* This table is a lower casing table. */\n\n");
 
@@ -162,7 +189,7 @@
   else fprintf(f, "%3d-", i-8);
 if (isprint(i-1)) fprintf(f, " %c ", i-1);
   else fprintf(f, "%3d", i-1);
-fprintf(f, " */\n\n/* End of chartables.c */\n");
+fprintf(f, " */\n\n/* End of pcre_chartables.c */\n");
 
 fclose(f);
 free((void *)base_of_tables);

Modified: freeswitch/trunk/libs/win32/pcre/libpcre.2008.vcproj
==============================================================================
--- freeswitch/trunk/libs/win32/pcre/libpcre.2008.vcproj	(original)
+++ freeswitch/trunk/libs/win32/pcre/libpcre.2008.vcproj	Tue Jun  9 12:35:48 2009
@@ -55,8 +55,8 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				Optimization="0"
-				AdditionalIncludeDirectories="./"
-				PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;PCRE_STATIC"
+				AdditionalIncludeDirectories="&quot;$(ProjectDir)&quot;;&quot;$(ProjectDir)..\..\pcre&quot;"
+				PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;PCRE_STATIC;HAVE_CONFIG_H"
 				MinimalRebuild="true"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -104,9 +104,9 @@
 			/>
 		</Configuration>
 		<Configuration
-			Name="Release|Win32"
-			OutputDirectory="$(ConfigurationName)"
-			IntermediateDirectory="$(ConfigurationName)"
+			Name="Debug|x64"
+			OutputDirectory="$(PlatformName)\$(ConfigurationName)"
+			IntermediateDirectory="$(PlatformName)\$(ConfigurationName)"
 			ConfigurationType="4"
 			UseOfMFC="0"
 			ATLMinimizesCRunTimeLibraryUsage="false"
@@ -130,35 +130,35 @@
 			/>
 			<Tool
 				Name="VCMIDLTool"
-				PreprocessorDefinitions="NDEBUG"
+				PreprocessorDefinitions="_DEBUG"
 				MkTypLibCompatible="true"
 				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\Release/libpcre.tlb"
+				TargetEnvironment="3"
+				TypeLibraryName=".\Debug/libpcre.tlb"
 				HeaderFileName=""
 			/>
 			<Tool
 				Name="VCCLCompilerTool"
-				Optimization="2"
-				InlineFunctionExpansion="1"
-				AdditionalIncludeDirectories="./"
-				PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;PCRE_STATIC"
-				StringPooling="true"
-				RuntimeLibrary="2"
-				EnableFunctionLevelLinking="true"
+				Optimization="0"
+				AdditionalIncludeDirectories="&quot;$(ProjectDir)&quot;;&quot;$(ProjectDir)..\..\pcre&quot;"
+				PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;PCRE_STATIC;HAVE_CONFIG_H"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="3"
 				PrecompiledHeaderFile="$(OutDir)\libpcre.pch"
 				AssemblerListingLocation=""
 				ObjectFile="$(IntDir)\"
 				ProgramDataBaseFileName="$(IntDir)\vc80.pdb"
 				WarningLevel="3"
 				SuppressStartupBanner="true"
+				DebugInformationFormat="3"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
 			/>
 			<Tool
 				Name="VCResourceCompilerTool"
-				PreprocessorDefinitions="NDEBUG"
+				PreprocessorDefinitions="_DEBUG"
 				Culture="1033"
 			/>
 			<Tool
@@ -189,10 +189,10 @@
 			/>
 		</Configuration>
 		<Configuration
-			Name="Debug DLL|Win32"
-			OutputDirectory="$(SolutionDir)Debug"
+			Name="Release|Win32"
+			OutputDirectory="$(ConfigurationName)"
 			IntermediateDirectory="$(ConfigurationName)"
-			ConfigurationType="2"
+			ConfigurationType="4"
 			UseOfMFC="0"
 			ATLMinimizesCRunTimeLibraryUsage="false"
 			>
@@ -215,61 +215,49 @@
 			/>
 			<Tool
 				Name="VCMIDLTool"
-				PreprocessorDefinitions="_DEBUG"
+				PreprocessorDefinitions="NDEBUG"
 				MkTypLibCompatible="true"
 				SuppressStartupBanner="true"
 				TargetEnvironment="1"
-				TypeLibraryName=".\Debug/libpcre.tlb"
+				TypeLibraryName=".\Release/libpcre.tlb"
 				HeaderFileName=""
 			/>
 			<Tool
 				Name="VCCLCompilerTool"
-				Optimization="0"
-				AdditionalIncludeDirectories="./"
-				PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;DLL_EXPORT"
-				MinimalRebuild="true"
-				BasicRuntimeChecks="3"
-				RuntimeLibrary="3"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="&quot;$(ProjectDir)&quot;;&quot;$(ProjectDir)..\..\pcre&quot;"
+				PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;PCRE_STATIC;HAVE_CONFIG_H"
+				StringPooling="true"
+				RuntimeLibrary="2"
+				EnableFunctionLevelLinking="true"
 				PrecompiledHeaderFile="$(OutDir)\libpcre.pch"
 				AssemblerListingLocation=""
 				ObjectFile="$(IntDir)\"
 				ProgramDataBaseFileName="$(IntDir)\vc80.pdb"
 				WarningLevel="3"
 				SuppressStartupBanner="true"
-				DebugInformationFormat="3"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
 			/>
 			<Tool
 				Name="VCResourceCompilerTool"
-				PreprocessorDefinitions="_DEBUG"
+				PreprocessorDefinitions="NDEBUG"
 				Culture="1033"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
 			/>
 			<Tool
-				Name="VCLinkerTool"
+				Name="VCLibrarianTool"
+				LinkLibraryDependencies="true"
 				AdditionalDependencies="odbc32.lib odbccp32.lib"
-				OutputFile="$(OutDir)\$(ProjectName).dll"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				ModuleDefinitionFile="$(InputDir)..\..\pcre\pcre.def"
-				GenerateDebugInformation="true"
-				ProgramDatabaseFile="$(IntDir)\$(ProjectName).pdb"
-				RandomizedBaseAddress="1"
-				DataExecutionPrevention="0"
-				ImportLibrary="$(IntDir)\$(ProjectName).lib"
-				TargetMachine="1"
 			/>
 			<Tool
 				Name="VCALinkTool"
 			/>
 			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
 				Name="VCXDCMakeTool"
 			/>
 			<Tool
@@ -281,18 +269,15 @@
 				Name="VCFxCopTool"
 			/>
 			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
 				Name="VCPostBuildEventTool"
 				CommandLine=""
 			/>
 		</Configuration>
 		<Configuration
-			Name="Release DLL|Win32"
-			OutputDirectory="$(SolutionDir)Release"
-			IntermediateDirectory="$(ConfigurationName)"
-			ConfigurationType="2"
+			Name="Release|x64"
+			OutputDirectory="$(PlatformName)\$(ConfigurationName)"
+			IntermediateDirectory="$(PlatformName)\$(ConfigurationName)"
+			ConfigurationType="4"
 			UseOfMFC="0"
 			ATLMinimizesCRunTimeLibraryUsage="false"
 			>
@@ -318,7 +303,7 @@
 				PreprocessorDefinitions="NDEBUG"
 				MkTypLibCompatible="true"
 				SuppressStartupBanner="true"
-				TargetEnvironment="1"
+				TargetEnvironment="3"
 				TypeLibraryName=".\Release/libpcre.tlb"
 				HeaderFileName=""
 			/>
@@ -326,8 +311,8 @@
 				Name="VCCLCompilerTool"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				AdditionalIncludeDirectories="./"
-				PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;DLL_EXPORT"
+				AdditionalIncludeDirectories="&quot;$(ProjectDir)&quot;;&quot;$(ProjectDir)..\..\pcre&quot;"
+				PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;PCRE_STATIC;HAVE_CONFIG_H"
 				StringPooling="true"
 				RuntimeLibrary="2"
 				EnableFunctionLevelLinking="true"
@@ -350,25 +335,14 @@
 				Name="VCPreLinkEventTool"
 			/>
 			<Tool
-				Name="VCLinkerTool"
+				Name="VCLibrarianTool"
+				LinkLibraryDependencies="true"
 				AdditionalDependencies="odbc32.lib odbccp32.lib"
-				OutputFile="$(OutDir)\$(ProjectName).dll"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				ModuleDefinitionFile="$(InputDir)..\..\pcre\pcre.def"
-				ProgramDatabaseFile="$(IntDir)\$(ProjectName).pdb"
-				RandomizedBaseAddress="1"
-				DataExecutionPrevention="0"
-				ImportLibrary="$(IntDir)\$(ProjectName).lib"
-				TargetMachine="1"
 			/>
 			<Tool
 				Name="VCALinkTool"
 			/>
 			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
 				Name="VCXDCMakeTool"
 			/>
 			<Tool
@@ -380,18 +354,15 @@
 				Name="VCFxCopTool"
 			/>
 			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
 				Name="VCPostBuildEventTool"
 				CommandLine=""
 			/>
 		</Configuration>
 		<Configuration
-			Name="Debug|x64"
-			OutputDirectory="$(PlatformName)\$(ConfigurationName)"
-			IntermediateDirectory="$(PlatformName)\$(ConfigurationName)"
-			ConfigurationType="4"
+			Name="Debug DLL|Win32"
+			OutputDirectory="$(SolutionDir)Debug"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="2"
 			UseOfMFC="0"
 			ATLMinimizesCRunTimeLibraryUsage="false"
 			>
@@ -417,15 +388,15 @@
 				PreprocessorDefinitions="_DEBUG"
 				MkTypLibCompatible="true"
 				SuppressStartupBanner="true"
-				TargetEnvironment="3"
+				TargetEnvironment="1"
 				TypeLibraryName=".\Debug/libpcre.tlb"
 				HeaderFileName=""
 			/>
 			<Tool
 				Name="VCCLCompilerTool"
 				Optimization="0"
-				AdditionalIncludeDirectories="./"
-				PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;PCRE_STATIC"
+				AdditionalIncludeDirectories="&quot;$(ProjectDir)&quot;;&quot;$(ProjectDir)..\..\pcre&quot;"
+				PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;DLL_EXPORT;HAVE_CONFIG_H"
 				MinimalRebuild="true"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -449,14 +420,26 @@
 				Name="VCPreLinkEventTool"
 			/>
 			<Tool
-				Name="VCLibrarianTool"
-				LinkLibraryDependencies="true"
+				Name="VCLinkerTool"
 				AdditionalDependencies="odbc32.lib odbccp32.lib"
+				OutputFile="$(OutDir)\$(ProjectName).dll"
+				LinkIncremental="1"
+				SuppressStartupBanner="true"
+				ModuleDefinitionFile="$(InputDir)..\..\pcre\pcre.def"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(IntDir)\$(ProjectName).pdb"
+				RandomizedBaseAddress="1"
+				DataExecutionPrevention="0"
+				ImportLibrary="$(IntDir)\$(ProjectName).lib"
+				TargetMachine="1"
 			/>
 			<Tool
 				Name="VCALinkTool"
 			/>
 			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
 				Name="VCXDCMakeTool"
 			/>
 			<Tool
@@ -468,15 +451,18 @@
 				Name="VCFxCopTool"
 			/>
 			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
 				Name="VCPostBuildEventTool"
 				CommandLine=""
 			/>
 		</Configuration>
 		<Configuration
-			Name="Release|x64"
-			OutputDirectory="$(PlatformName)\$(ConfigurationName)"
+			Name="Debug DLL|x64"
+			OutputDirectory="$(SolutionDir)$(PlatformName)\$(ConfigurationName)"
 			IntermediateDirectory="$(PlatformName)\$(ConfigurationName)"
-			ConfigurationType="4"
+			ConfigurationType="2"
 			UseOfMFC="0"
 			ATLMinimizesCRunTimeLibraryUsage="false"
 			>
@@ -499,49 +485,61 @@
 			/>
 			<Tool
 				Name="VCMIDLTool"
-				PreprocessorDefinitions="NDEBUG"
+				PreprocessorDefinitions="_DEBUG"
 				MkTypLibCompatible="true"
 				SuppressStartupBanner="true"
 				TargetEnvironment="3"
-				TypeLibraryName=".\Release/libpcre.tlb"
+				TypeLibraryName=".\Debug/libpcre.tlb"
 				HeaderFileName=""
 			/>
 			<Tool
 				Name="VCCLCompilerTool"
-				Optimization="2"
-				InlineFunctionExpansion="1"
-				AdditionalIncludeDirectories="./"
-				PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;PCRE_STATIC"
-				StringPooling="true"
-				RuntimeLibrary="2"
-				EnableFunctionLevelLinking="true"
+				Optimization="0"
+				AdditionalIncludeDirectories="&quot;$(ProjectDir)&quot;;&quot;$(ProjectDir)..\..\pcre&quot;"
+				PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;DLL_EXPORT;HAVE_CONFIG_H"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="3"
 				PrecompiledHeaderFile="$(OutDir)\libpcre.pch"
 				AssemblerListingLocation=""
 				ObjectFile="$(IntDir)\"
 				ProgramDataBaseFileName="$(IntDir)\vc80.pdb"
 				WarningLevel="3"
 				SuppressStartupBanner="true"
+				DebugInformationFormat="3"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
 			/>
 			<Tool
 				Name="VCResourceCompilerTool"
-				PreprocessorDefinitions="NDEBUG"
+				PreprocessorDefinitions="_DEBUG"
 				Culture="1033"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
 			/>
 			<Tool
-				Name="VCLibrarianTool"
-				LinkLibraryDependencies="true"
+				Name="VCLinkerTool"
 				AdditionalDependencies="odbc32.lib odbccp32.lib"
+				OutputFile="$(OutDir)\$(ProjectName).dll"
+				LinkIncremental="1"
+				SuppressStartupBanner="true"
+				ModuleDefinitionFile="$(InputDir)..\..\pcre\pcre.def"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(IntDir)\$(ProjectName).pdb"
+				RandomizedBaseAddress="1"
+				DataExecutionPrevention="0"
+				ImportLibrary="$(IntDir)\$(ProjectName).lib"
+				TargetMachine="17"
 			/>
 			<Tool
 				Name="VCALinkTool"
 			/>
 			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
 				Name="VCXDCMakeTool"
 			/>
 			<Tool
@@ -553,14 +551,17 @@
 				Name="VCFxCopTool"
 			/>
 			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
 				Name="VCPostBuildEventTool"
 				CommandLine=""
 			/>
 		</Configuration>
 		<Configuration
-			Name="Debug DLL|x64"
-			OutputDirectory="$(SolutionDir)$(PlatformName)\$(ConfigurationName)"
-			IntermediateDirectory="$(PlatformName)\$(ConfigurationName)"
+			Name="Release DLL|Win32"
+			OutputDirectory="$(SolutionDir)Release"
+			IntermediateDirectory="$(ConfigurationName)"
 			ConfigurationType="2"
 			UseOfMFC="0"
 			ATLMinimizesCRunTimeLibraryUsage="false"
@@ -584,35 +585,35 @@
 			/>
 			<Tool
 				Name="VCMIDLTool"
-				PreprocessorDefinitions="_DEBUG"
+				PreprocessorDefinitions="NDEBUG"
 				MkTypLibCompatible="true"
 				SuppressStartupBanner="true"
-				TargetEnvironment="3"
-				TypeLibraryName=".\Debug/libpcre.tlb"
+				TargetEnvironment="1"
+				TypeLibraryName=".\Release/libpcre.tlb"
 				HeaderFileName=""
 			/>
 			<Tool
 				Name="VCCLCompilerTool"
-				Optimization="0"
-				AdditionalIncludeDirectories="./"
-				PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;DLL_EXPORT"
-				MinimalRebuild="true"
-				BasicRuntimeChecks="3"
-				RuntimeLibrary="3"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="&quot;$(ProjectDir)&quot;;&quot;$(ProjectDir)..\..\pcre&quot;"
+				PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;DLL_EXPORT;HAVE_CONFIG_H"
+				StringPooling="true"
+				RuntimeLibrary="2"
+				EnableFunctionLevelLinking="true"
 				PrecompiledHeaderFile="$(OutDir)\libpcre.pch"
 				AssemblerListingLocation=""
 				ObjectFile="$(IntDir)\"
 				ProgramDataBaseFileName="$(IntDir)\vc80.pdb"
 				WarningLevel="3"
 				SuppressStartupBanner="true"
-				DebugInformationFormat="3"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
 			/>
 			<Tool
 				Name="VCResourceCompilerTool"
-				PreprocessorDefinitions="_DEBUG"
+				PreprocessorDefinitions="NDEBUG"
 				Culture="1033"
 			/>
 			<Tool
@@ -625,12 +626,11 @@
 				LinkIncremental="1"
 				SuppressStartupBanner="true"
 				ModuleDefinitionFile="$(InputDir)..\..\pcre\pcre.def"
-				GenerateDebugInformation="true"
 				ProgramDatabaseFile="$(IntDir)\$(ProjectName).pdb"
 				RandomizedBaseAddress="1"
 				DataExecutionPrevention="0"
 				ImportLibrary="$(IntDir)\$(ProjectName).lib"
-				TargetMachine="17"
+				TargetMachine="1"
 			/>
 			<Tool
 				Name="VCALinkTool"
@@ -695,8 +695,8 @@
 				Name="VCCLCompilerTool"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				AdditionalIncludeDirectories="./"
-				PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;DLL_EXPORT"
+				AdditionalIncludeDirectories="&quot;$(ProjectDir)&quot;;&quot;$(ProjectDir)..\..\pcre&quot;"
+				PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;DLL_EXPORT;HAVE_CONFIG_H"
 				StringPooling="true"
 				RuntimeLibrary="2"
 				EnableFunctionLevelLinking="true"
@@ -775,990 +775,54 @@
 			<File
 				RelativePath="..\..\pcre\pcre_config.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_dfa_exec.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_exec.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_fullinfo.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_get.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_globals.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_info.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_maketables.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_ord2utf8.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_refcount.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_study.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_tables.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_try_flipped.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_ucp_searchfuncs.c"
@@ -1767,306 +831,14 @@
 			<File
 				RelativePath="..\..\pcre\pcre_valid_utf8.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_version.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_xclass.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-			</File>
-			<File
-				RelativePath="..\..\pcre\pcreposix.c"
-				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|x64"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 		</Filter>
 		<Filter

Modified: freeswitch/trunk/libs/win32/pcre/libpcre.vcproj
==============================================================================
--- freeswitch/trunk/libs/win32/pcre/libpcre.vcproj	(original)
+++ freeswitch/trunk/libs/win32/pcre/libpcre.vcproj	Tue Jun  9 12:35:48 2009
@@ -51,8 +51,8 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				Optimization="0"
-				AdditionalIncludeDirectories="./"
-				PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;PCRE_STATIC"
+				AdditionalIncludeDirectories="&quot;$(ProjectDir)&quot;;&quot;$(ProjectDir)..\..\pcre&quot;"
+				PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;PCRE_STATIC;HAVE_CONFIG_H"
 				MinimalRebuild="true"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -137,8 +137,8 @@
 				Name="VCCLCompilerTool"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				AdditionalIncludeDirectories="./"
-				PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;PCRE_STATIC"
+				AdditionalIncludeDirectories="&quot;$(ProjectDir)&quot;;&quot;$(ProjectDir)..\..\pcre&quot;"
+				PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;PCRE_STATIC;HAVE_CONFIG_H"
 				StringPooling="true"
 				RuntimeLibrary="2"
 				EnableFunctionLevelLinking="true"
@@ -221,8 +221,8 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				Optimization="0"
-				AdditionalIncludeDirectories="./"
-				PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;DLL_EXPORT"
+				AdditionalIncludeDirectories="&quot;$(ProjectDir)&quot;;&quot;$(ProjectDir)..\..\pcre&quot;"
+				PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;DLL_EXPORT;HAVE_CONFIG_H"
 				MinimalRebuild="true"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -323,8 +323,8 @@
 				Name="VCCLCompilerTool"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				AdditionalIncludeDirectories="./"
-				PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;DLL_EXPORT"
+				AdditionalIncludeDirectories="&quot;$(ProjectDir)&quot;;&quot;$(ProjectDir)..\..\pcre&quot;"
+				PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;DLL_EXPORT;HAVE_CONFIG_H"
 				StringPooling="true"
 				RuntimeLibrary="2"
 				EnableFunctionLevelLinking="true"
@@ -404,522 +404,54 @@
 			<File
 				RelativePath="..\..\pcre\pcre_config.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_dfa_exec.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_exec.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_fullinfo.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_get.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_globals.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_info.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_maketables.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_ord2utf8.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_refcount.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_study.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_tables.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_try_flipped.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_ucp_searchfuncs.c"
@@ -928,162 +460,18 @@
 			<File
 				RelativePath="..\..\pcre\pcre_valid_utf8.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_version.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcre_xclass.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 			<File
 				RelativePath="..\..\pcre\pcreposix.c"
 				>
-				<FileConfiguration
-					Name="Debug|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Debug DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release DLL|Win32"
-					>
-					<Tool
-						Name="VCCLCompilerTool"
-						AdditionalIncludeDirectories=""
-						PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)"
-					/>
-				</FileConfiguration>
 			</File>
 		</Filter>
 		<Filter

Modified: freeswitch/trunk/libs/win32/pcre/pcre_chartables.c.2008.vcproj
==============================================================================
--- freeswitch/trunk/libs/win32/pcre/pcre_chartables.c.2008.vcproj	(original)
+++ freeswitch/trunk/libs/win32/pcre/pcre_chartables.c.2008.vcproj	Tue Jun  9 12:35:48 2009
@@ -46,7 +46,7 @@
 				Name="VCCLCompilerTool"
 				Optimization="0"
 				AdditionalIncludeDirectories="..\..\pcre\"
-				PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE"
+				PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE;HAVE_CONFIG_H"
 				MinimalRebuild="true"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="2"
@@ -97,12 +97,11 @@
 			/>
 		</Configuration>
 		<Configuration
-			Name="Release|Win32"
-			OutputDirectory="$(ConfigurationName)"
-			IntermediateDirectory="$(ConfigurationName)"
+			Name="Debug|x64"
+			OutputDirectory="$(PlatformName)\$(ConfigurationName)"
+			IntermediateDirectory="$(PlatformName)\$(ConfigurationName)"
 			ConfigurationType="1"
 			CharacterSet="1"
-			WholeProgramOptimization="1"
 			>
 			<Tool
 				Name="VCPreBuildEventTool"
@@ -119,11 +118,15 @@
 			/>
 			<Tool
 				Name="VCMIDLTool"
+				TargetEnvironment="3"
 			/>
 			<Tool
 				Name="VCCLCompilerTool"
+				Optimization="0"
 				AdditionalIncludeDirectories="..\..\pcre\"
-				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE"
+				PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE;HAVE_CONFIG_H"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="3"
 				RuntimeLibrary="2"
 				UsePrecompiledHeader="0"
 				WarningLevel="3"
@@ -141,14 +144,12 @@
 			<Tool
 				Name="VCLinkerTool"
 				OutputFile="$(OutDir)\dftables.exe"
-				LinkIncremental="1"
+				LinkIncremental="2"
 				GenerateDebugInformation="true"
 				SubSystem="1"
-				OptimizeReferences="2"
-				EnableCOMDATFolding="2"
-				RandomizedBaseAddress="2"
+				RandomizedBaseAddress="1"
 				DataExecutionPrevention="0"
-				TargetMachine="1"
+				TargetMachine="17"
 			/>
 			<Tool
 				Name="VCALinkTool"
@@ -174,11 +175,12 @@
 			/>
 		</Configuration>
 		<Configuration
-			Name="Debug|x64"
-			OutputDirectory="$(PlatformName)\$(ConfigurationName)"
-			IntermediateDirectory="$(PlatformName)\$(ConfigurationName)"
+			Name="Release|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
 			ConfigurationType="1"
 			CharacterSet="1"
+			WholeProgramOptimization="1"
 			>
 			<Tool
 				Name="VCPreBuildEventTool"
@@ -195,15 +197,11 @@
 			/>
 			<Tool
 				Name="VCMIDLTool"
-				TargetEnvironment="3"
 			/>
 			<Tool
 				Name="VCCLCompilerTool"
-				Optimization="0"
 				AdditionalIncludeDirectories="..\..\pcre\"
-				PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE"
-				MinimalRebuild="true"
-				BasicRuntimeChecks="3"
+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE;HAVE_CONFIG_H"
 				RuntimeLibrary="2"
 				UsePrecompiledHeader="0"
 				WarningLevel="3"
@@ -221,12 +219,14 @@
 			<Tool
 				Name="VCLinkerTool"
 				OutputFile="$(OutDir)\dftables.exe"
-				LinkIncremental="2"
+				LinkIncremental="1"
 				GenerateDebugInformation="true"
 				SubSystem="1"
-				RandomizedBaseAddress="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				RandomizedBaseAddress="2"
 				DataExecutionPrevention="0"
-				TargetMachine="17"
+				TargetMachine="1"
 			/>
 			<Tool
 				Name="VCALinkTool"
@@ -279,7 +279,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				AdditionalIncludeDirectories="..\..\pcre\"
-				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE"
+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE;HAVE_CONFIG_H"
 				RuntimeLibrary="2"
 				UsePrecompiledHeader="0"
 				WarningLevel="3"

Modified: freeswitch/trunk/libs/win32/pcre/pcre_chartables.c.vcproj
==============================================================================
--- freeswitch/trunk/libs/win32/pcre/pcre_chartables.c.vcproj	(original)
+++ freeswitch/trunk/libs/win32/pcre/pcre_chartables.c.vcproj	Tue Jun  9 12:35:48 2009
@@ -42,7 +42,7 @@
 				Name="VCCLCompilerTool"
 				Optimization="0"
 				AdditionalIncludeDirectories="..\..\pcre\"
-				PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE"
+				PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE;HAVE_CONFIG_H"
 				MinimalRebuild="true"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -121,7 +121,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				AdditionalIncludeDirectories="..\..\pcre\"
-				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE"
+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE;HAVE_CONFIG_H"
 				RuntimeLibrary="2"
 				UsePrecompiledHeader="0"
 				WarningLevel="3"