[Freeswitch-trunk] [commit] r6259 - freeswitch/trunk/conf

Freeswitch SVN anthm at freeswitch.org
Wed Nov 14 15:29:19 EST 2007


Author: anthm
Date: Wed Nov 14 15:29:19 2007
New Revision: 6259

Modified:
   freeswitch/trunk/conf/freeswitch.xml
   freeswitch/trunk/conf/sofia.conf.xml
   freeswitch/trunk/conf/vars.xml

Log:
make preprocessor also be a tag for everyone who keeps begging for it

Modified: freeswitch/trunk/conf/freeswitch.xml
==============================================================================
--- freeswitch/trunk/conf/freeswitch.xml	(original)
+++ freeswitch/trunk/conf/freeswitch.xml	Wed Nov 14 15:29:19 2007
@@ -9,63 +9,66 @@
                    (note the double $$ which denotes preprocessor variables)
       #comment ==> A general comment such as this
       
-      The preprocessor will compile the full xml document to ${prefix}/log/freeswitch.registry
+      The preprocessor will compile the full xml document to ${prefix}/log/freeswitch.xml.fsxml
       Don't modify it while freeswitch is running cos it is mem mapped in most cases =D
+      
+      The same can be achieved with the <X-PRE-PROCESS> tag where the attrs 'cmd' and 'data' are
+      parsed in the same way.
   -->
   <!--#comment
       vars.xml contains all the #set directives for the preprocessor.
   -->
-  <!--#include "vars.xml"-->
+  <X-PRE-PROCESS cmd="include" data="vars.xml"/>
 
   <section name="configuration" description="Various Configuration">
-    <!--#include "switch.conf.xml"-->
-    <!--#include "modules.conf.xml"-->
+    <X-PRE-PROCESS cmd="include" data="switch.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="modules.conf.xml"/>
 
     <!-- Order doesn't matter, but for clarity these are in same order as modules.conf.xml. 
          If they aren't loaded by modules.conf.xml, then they are ignored.
     --> 
     <!-- Loggers -->
-    <!--#include "console.conf.xml"-->
-    <!--#include "syslog.conf.xml"-->
+    <X-PRE-PROCESS cmd="include" data="console.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="syslog.conf.xml"/>
 
     <!-- Multi-Faceted -->
-    <!--#include "enum.conf.xml"-->
+    <X-PRE-PROCESS cmd="include" data="enum.conf.xml"/>
 
     <!-- XML Interfaces --> 
-    <!--#include "xml_rpc.conf.xml"-->
-    <!--#include "xml_cdr.conf.xml"-->
-    <!--#include "xml_curl.conf.xml"-->
+    <X-PRE-PROCESS cmd="include" data="xml_rpc.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="xml_cdr.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="xml_curl.conf.xml"/>
     <!-- none for mod_xml_cdr -->
 
     <!-- Event Handlers -->
-    <!--#include "cdr.conf.xml"-->
-    <!--#include "event_multicast.conf.xml"-->
-    <!--#include "event_socket.conf.xml"-->
-    <!--#include "xmpp_event.conf.xml"-->
-    <!--#include "zeroconf.conf.xml"-->
+    <X-PRE-PROCESS cmd="include" data="cdr.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="event_multicast.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="event_socket.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="xmpp_event.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="zeroconf.conf.xml"/>
 
     <!-- Directory Interfaces -->
     <!-- none for mod_ldap; dialplan_directory.conf.xml has ldap connection info -->
 
     <!-- Endpoints -->
-    <!--#include "dingaling.conf.xml"-->
-    <!--#include "iax.conf.xml"-->
-    <!--#include "portaudio.conf.xml"-->
-    <!--#include "alsa.conf.xml"-->
-    <!--#include "sofia.conf.xml"-->
-    <!--#include "wanpipe.conf.xml"-->
-    <!--#include "woomera.conf.xml"-->
+    <X-PRE-PROCESS cmd="include" data="dingaling.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="iax.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="portaudio.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="alsa.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="sofia.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="wanpipe.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="woomera.conf.xml"/>
 
     <!-- Applications -->
     <!-- none for mod_bridgecall, mod_commands, mod_echo, mod_park, mod_playback --> 
-    <!--#include "conference.conf.xml"-->
+    <X-PRE-PROCESS cmd="include" data="conference.conf.xml"/>
     <!-- ivr.conf is used by mod_dptools -->
-    <!--#include "ivr.conf.xml"-->
-    <!--#include "voicemail.conf.xml"-->
-    <!--#include "limit.conf.xml"-->
+    <X-PRE-PROCESS cmd="include" data="ivr.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="voicemail.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="limit.conf.xml"/>
 
     <!-- Dialplan Interfaces -->
-    <!--#include "dialplan_directory.conf.xml"-->
+    <X-PRE-PROCESS cmd="include" data="dialplan_directory.conf.xml"/>
     <!-- mod_dialplan_xml is configured in the separate "dialplan" section. -->
 
     <!-- Codec Interfaces -->
@@ -76,41 +79,41 @@
     <!-- no configuration needed -->
 
     <!-- Languages -->
-    <!--#include "spidermonkey.conf.xml"-->
+    <X-PRE-PROCESS cmd="include" data="spidermonkey.conf.xml"/>
     <!-- none for mod_perl -->
-    <!--#include "java.conf.xml"-->
+    <X-PRE-PROCESS cmd="include" data="java.conf.xml"/>
 
     <!-- ASR /TTS -->
     <!-- none for mod_cepstral -->
-    <!--#include "rss.conf.xml"-->
-    <!--#include "mod_openmrcp.conf.xml"-->
+    <X-PRE-PROCESS cmd="include" data="rss.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="mod_openmrcp.conf.xml"/>
 
     <!-- Say -->
     <!-- none for mod_say_en -->
-    <!--#include "mod_cdr.conf.xml"-->
-    <!--#include "mod_local_stream.conf.xml"-->
+    <X-PRE-PROCESS cmd="include" data="mod_cdr.conf.xml"/>
+    <X-PRE-PROCESS cmd="include" data="mod_local_stream.conf.xml"/>
   </section>
   
   <section name="dialplan" description="Regex/XML Dialplan">
-    <!--#include "dialplan/*.xml"-->
+    <X-PRE-PROCESS cmd="include" data="dialplan/*.xml"/>
   </section>
 
   <!-- mod_dingaling is reliant on the vcard data in the "directory" section. -->
   <!-- mod_sofia is reliant on the user data for authorization --> 
   <section name="directory" description="User Directory">
-    <!--#include "directory/*.xml"-->
+    <X-PRE-PROCESS cmd="include" data="directory/*.xml"/>
   </section>
 
   <!-- phrases section (under development still) -->
   <section name="phrases" description="Speech Phrase Management">
     <macros>
       <language name="en" sound-path="/snds" tts-engine="cepstral" tts-voice="david">
-	<!--#include "lang_en.xml"-->
+	<X-PRE-PROCESS cmd="include" data="lang_en.xml"/>
 	<!--voicemail_en_tts is purely implemented with tts, we need a files based implementation too -->
-	<!--#include "voicemail_en_tts.xml"-->
+	<X-PRE-PROCESS cmd="include" data="voicemail_en_tts.xml"/>
       </language>
       <language name="fr" sound_path="/var/sounds/lang/fr/jean" tts_engine="cepstral" tts_voice="jean-pierre">
-	<!--#include "lang_fr.xml"-->
+	<X-PRE-PROCESS cmd="include" data="lang_fr.xml"/>
       </language>
     </macros>
   </section>

Modified: freeswitch/trunk/conf/sofia.conf.xml
==============================================================================
--- freeswitch/trunk/conf/sofia.conf.xml	(original)
+++ freeswitch/trunk/conf/sofia.conf.xml	Wed Nov 14 15:29:19 2007
@@ -1,5 +1,5 @@
 <configuration name="sofia.conf" description="sofia Endpoint">
   <profiles>
-    <!--#include "sip_profiles/*.xml" -->
+    <X-PRE-PROCESS cmd="include" data="sip_profiles/*.xml"/>
   </profiles>
 </configuration>

Modified: freeswitch/trunk/conf/vars.xml
==============================================================================
--- freeswitch/trunk/conf/vars.xml	(original)
+++ freeswitch/trunk/conf/vars.xml	Wed Nov 14 15:29:19 2007
@@ -1,23 +1,23 @@
   <!-- Preprocessor Variables
        These are introduced when configuration strings must be consistent across modules. 
    -->
-  <!--#set "domain=$${local_ip_v4}"-->
+  <X-PRE-PROCESS cmd="set" data="domain=$${local_ip_v4}"/>
   <!-- sip_profile 
        Must be a domain name if you are being a registry server; otherwise
        can be any string.
        used by: sofia.conf.xml enum.conf.xml default_context.xml directory.xml
   --> 
-  <!--#set "sip_profile=$${domain}"-->
-  <!--#set "nat_sip_profile=nat_$${domain}"-->
+  <X-PRE-PROCESS cmd="set" data="sip_profile=$${domain}"/>
+  <X-PRE-PROCESS cmd="set" data="nat_sip_profile=nat_$${domain}"/>
   <!-- xmpp_client_profile and xmpp_server_profile
        xmpp_client_profile can be any string. 
        xmpp_server_profile is appended to "dingaling_" to form the database name
        containing the "subscriptions" table.
        used by: dingaling.conf.xml enum.conf.xml 
   --> 
-  <!--#set "global_codec_prefs=PCMU at 20i"-->
-  <!--#set "xmpp_client_profile=xmppc"-->
-  <!--#set "xmpp_server_profile=xmpps"-->
+  <X-PRE-PROCESS cmd="set" data="global_codec_prefs=PCMU at 20i"/>
+  <X-PRE-PROCESS cmd="set" data="xmpp_client_profile=xmppc"/>
+  <X-PRE-PROCESS cmd="set" data="xmpp_server_profile=xmpps"/>
   <!-- bind_server_ip
        Can be an ip address, a dns name, or "auto". 
        This determines an ip address available on this host to bind.
@@ -25,21 +25,21 @@
        use different addresses where this variable appears.
        Used by: sofia.conf.xml dingaling.conf.xml
   -->
-  <!--#set "bind_server_ip=auto"-->
+  <X-PRE-PROCESS cmd="set" data="bind_server_ip=auto"/>
   <!-- external_rtp_ip
        Used as the public IP address for SDP.
        Can be an ip address or a string like "stun:stun.server.com" 
        If unspecified, the bind_server_ip value is used.
        Used by: sofia.conf.xml dingaling.conf.xml
   -->
-  <!--#set "external_rtp_ip=stun:stun.fwdnet.net"-->
+  <X-PRE-PROCESS cmd="set" data="external_rtp_ip=stun:stun.fwdnet.net"/>
   <!-- external_sip_ip
        Used as the public IP address for SDP.
        Can be an ip address or a string like "stun:stun.server.com" 
        If unspecified, the bind_server_ip value is used.
        Used by: sofia.conf.xml dingaling.conf.xml
   -->
-  <!--#set "external_sip_ip=stun:stun.fwdnet.net"-->
+  <X-PRE-PROCESS cmd="set" data="external_sip_ip=stun:stun.fwdnet.net"/>
   <!-- server_name
        A public ip address or DNS name that is used when advertising conference
        presence or registering sip.
@@ -49,6 +49,6 @@
        The caller ID telephone number we should use when calling out.
        Used by: conference.conf.xml
   -->
-  <!--#set "outbound_caller_name=FreeSWITCH"-->
-  <!--#set "outbound_caller_id=8777423583"-->
+  <X-PRE-PROCESS cmd="set" data="outbound_caller_name=FreeSWITCH"/>
+  <X-PRE-PROCESS cmd="set" data="outbound_caller_id=8777423583"/>
 



More information about the Freeswitch-trunk mailing list