[Freeswitch-svn] [commit] r3759 - in freeswitch/trunk: libs/speex libs/speex/doc libs/speex/include libs/speex/include/speex libs/speex/libspeex libs/speex/src libs/speex/symbian libs/speex/ti libs/speex/ti/speex_C54_test libs/speex/ti/speex_C55_test libs/speex/ti/speex_C64_test libs/speex/win32 libs/speex/win32/VS2003 libs/speex/win32/VS2003/libspeex libs/speex/win32/VS2003/speexdec libs/speex/win32/VS2003/speexenc libs/speex/win32/VS2005 libs/speex/win32/VS2005/libspeex libs/speex/win32/VS2005/speexdec libs/speex/win32/VS2005/speexenc libs/speex/win32/libspeex libs/speex/win32/speexdec libs/speex/win32/speexenc src/mod/codecs/mod_speex

Freeswitch SVN mikej at freeswitch.org
Wed Dec 20 13:13:29 EST 2006


Author: mikej
Date: Wed Dec 20 13:13:27 2006
New Revision: 3759

Added:
   freeswitch/trunk/libs/speex/   (props changed)
   freeswitch/trunk/libs/speex/AUTHORS
   freeswitch/trunk/libs/speex/COPYING
   freeswitch/trunk/libs/speex/ChangeLog
   freeswitch/trunk/libs/speex/INSTALL
   freeswitch/trunk/libs/speex/Makefile.am
   freeswitch/trunk/libs/speex/Makefile.in
   freeswitch/trunk/libs/speex/NEWS
   freeswitch/trunk/libs/speex/README
   freeswitch/trunk/libs/speex/README.TI-DSP
   freeswitch/trunk/libs/speex/README.blackfin
   freeswitch/trunk/libs/speex/README.symbian
   freeswitch/trunk/libs/speex/Speex.kdevelop
   freeswitch/trunk/libs/speex/Speex.spec
   freeswitch/trunk/libs/speex/Speex.spec.in
   freeswitch/trunk/libs/speex/TODO
   freeswitch/trunk/libs/speex/acinclude.m4
   freeswitch/trunk/libs/speex/aclocal.m4
   freeswitch/trunk/libs/speex/config.guess   (contents, props changed)
   freeswitch/trunk/libs/speex/config.h.in
   freeswitch/trunk/libs/speex/config.sub   (contents, props changed)
   freeswitch/trunk/libs/speex/configure   (contents, props changed)
   freeswitch/trunk/libs/speex/configure.ac
   freeswitch/trunk/libs/speex/depcomp   (contents, props changed)
   freeswitch/trunk/libs/speex/doc/   (props changed)
   freeswitch/trunk/libs/speex/doc/Makefile.am
   freeswitch/trunk/libs/speex/doc/Makefile.in
   freeswitch/trunk/libs/speex/doc/manual.pdf   (contents, props changed)
   freeswitch/trunk/libs/speex/include/   (props changed)
   freeswitch/trunk/libs/speex/include/Makefile.am
   freeswitch/trunk/libs/speex/include/Makefile.in
   freeswitch/trunk/libs/speex/include/speex/   (props changed)
   freeswitch/trunk/libs/speex/include/speex/Makefile.am
   freeswitch/trunk/libs/speex/include/speex/Makefile.in
   freeswitch/trunk/libs/speex/include/speex/speex.h
   freeswitch/trunk/libs/speex/include/speex/speex_bits.h
   freeswitch/trunk/libs/speex/include/speex/speex_callbacks.h
   freeswitch/trunk/libs/speex/include/speex/speex_config_types.h.in
   freeswitch/trunk/libs/speex/include/speex/speex_echo.h
   freeswitch/trunk/libs/speex/include/speex/speex_header.h
   freeswitch/trunk/libs/speex/include/speex/speex_jitter.h
   freeswitch/trunk/libs/speex/include/speex/speex_preprocess.h
   freeswitch/trunk/libs/speex/include/speex/speex_stereo.h
   freeswitch/trunk/libs/speex/include/speex/speex_types.h
   freeswitch/trunk/libs/speex/install-sh   (contents, props changed)
   freeswitch/trunk/libs/speex/libspeex/   (props changed)
   freeswitch/trunk/libs/speex/libspeex/Makefile.am
   freeswitch/trunk/libs/speex/libspeex/Makefile.in
   freeswitch/trunk/libs/speex/libspeex/_kiss_fft_guts.h
   freeswitch/trunk/libs/speex/libspeex/arch.h
   freeswitch/trunk/libs/speex/libspeex/bits.c
   freeswitch/trunk/libs/speex/libspeex/cb_search.c
   freeswitch/trunk/libs/speex/libspeex/cb_search.h
   freeswitch/trunk/libs/speex/libspeex/cb_search_arm4.h
   freeswitch/trunk/libs/speex/libspeex/cb_search_bfin.h
   freeswitch/trunk/libs/speex/libspeex/cb_search_sse.h
   freeswitch/trunk/libs/speex/libspeex/exc_10_16_table.c
   freeswitch/trunk/libs/speex/libspeex/exc_10_32_table.c
   freeswitch/trunk/libs/speex/libspeex/exc_20_32_table.c
   freeswitch/trunk/libs/speex/libspeex/exc_5_256_table.c
   freeswitch/trunk/libs/speex/libspeex/exc_5_64_table.c
   freeswitch/trunk/libs/speex/libspeex/exc_8_128_table.c
   freeswitch/trunk/libs/speex/libspeex/fftwrap.c
   freeswitch/trunk/libs/speex/libspeex/fftwrap.h
   freeswitch/trunk/libs/speex/libspeex/filters.c
   freeswitch/trunk/libs/speex/libspeex/filters.h
   freeswitch/trunk/libs/speex/libspeex/filters_arm4.h
   freeswitch/trunk/libs/speex/libspeex/filters_bfin.h
   freeswitch/trunk/libs/speex/libspeex/filters_sse.h
   freeswitch/trunk/libs/speex/libspeex/fixed_arm4.h
   freeswitch/trunk/libs/speex/libspeex/fixed_arm5e.h
   freeswitch/trunk/libs/speex/libspeex/fixed_bfin.h
   freeswitch/trunk/libs/speex/libspeex/fixed_debug.h
   freeswitch/trunk/libs/speex/libspeex/fixed_generic.h
   freeswitch/trunk/libs/speex/libspeex/gain_table.c
   freeswitch/trunk/libs/speex/libspeex/gain_table_lbr.c
   freeswitch/trunk/libs/speex/libspeex/hexc_10_32_table.c
   freeswitch/trunk/libs/speex/libspeex/hexc_table.c
   freeswitch/trunk/libs/speex/libspeex/high_lsp_tables.c
   freeswitch/trunk/libs/speex/libspeex/jitter.c
   freeswitch/trunk/libs/speex/libspeex/kiss_fft.c
   freeswitch/trunk/libs/speex/libspeex/kiss_fft.h
   freeswitch/trunk/libs/speex/libspeex/kiss_fftr.c
   freeswitch/trunk/libs/speex/libspeex/kiss_fftr.h
   freeswitch/trunk/libs/speex/libspeex/lbr_48k_tables.c
   freeswitch/trunk/libs/speex/libspeex/lpc.c
   freeswitch/trunk/libs/speex/libspeex/lpc.h
   freeswitch/trunk/libs/speex/libspeex/lpc_bfin.h
   freeswitch/trunk/libs/speex/libspeex/lsp.c
   freeswitch/trunk/libs/speex/libspeex/lsp.h
   freeswitch/trunk/libs/speex/libspeex/lsp_bfin.h
   freeswitch/trunk/libs/speex/libspeex/lsp_tables_nb.c
   freeswitch/trunk/libs/speex/libspeex/ltp.c
   freeswitch/trunk/libs/speex/libspeex/ltp.h
   freeswitch/trunk/libs/speex/libspeex/ltp_arm4.h
   freeswitch/trunk/libs/speex/libspeex/ltp_bfin.h
   freeswitch/trunk/libs/speex/libspeex/ltp_sse.h
   freeswitch/trunk/libs/speex/libspeex/math_approx.c
   freeswitch/trunk/libs/speex/libspeex/math_approx.h
   freeswitch/trunk/libs/speex/libspeex/mdf.c
   freeswitch/trunk/libs/speex/libspeex/misc.c
   freeswitch/trunk/libs/speex/libspeex/misc.h
   freeswitch/trunk/libs/speex/libspeex/misc_bfin.h
   freeswitch/trunk/libs/speex/libspeex/modes.c
   freeswitch/trunk/libs/speex/libspeex/modes.h
   freeswitch/trunk/libs/speex/libspeex/nb_celp.c
   freeswitch/trunk/libs/speex/libspeex/nb_celp.h
   freeswitch/trunk/libs/speex/libspeex/preprocess.c
   freeswitch/trunk/libs/speex/libspeex/pseudofloat.h
   freeswitch/trunk/libs/speex/libspeex/quant_lsp.c
   freeswitch/trunk/libs/speex/libspeex/quant_lsp.h
   freeswitch/trunk/libs/speex/libspeex/quant_lsp_bfin.h
   freeswitch/trunk/libs/speex/libspeex/sb_celp.c
   freeswitch/trunk/libs/speex/libspeex/sb_celp.h
   freeswitch/trunk/libs/speex/libspeex/smallft.c
   freeswitch/trunk/libs/speex/libspeex/smallft.h
   freeswitch/trunk/libs/speex/libspeex/speex.c
   freeswitch/trunk/libs/speex/libspeex/speex_callbacks.c
   freeswitch/trunk/libs/speex/libspeex/speex_header.c
   freeswitch/trunk/libs/speex/libspeex/stack_alloc.h
   freeswitch/trunk/libs/speex/libspeex/stereo.c
   freeswitch/trunk/libs/speex/libspeex/testdenoise.c
   freeswitch/trunk/libs/speex/libspeex/testecho.c
   freeswitch/trunk/libs/speex/libspeex/testenc.c
   freeswitch/trunk/libs/speex/libspeex/testenc_uwb.c
   freeswitch/trunk/libs/speex/libspeex/testenc_wb.c
   freeswitch/trunk/libs/speex/libspeex/vbr.c
   freeswitch/trunk/libs/speex/libspeex/vbr.h
   freeswitch/trunk/libs/speex/libspeex/vorbis_psy.c
   freeswitch/trunk/libs/speex/libspeex/vorbis_psy.h
   freeswitch/trunk/libs/speex/libspeex/vq.c
   freeswitch/trunk/libs/speex/libspeex/vq.h
   freeswitch/trunk/libs/speex/libspeex/vq_arm4.h
   freeswitch/trunk/libs/speex/libspeex/vq_bfin.h
   freeswitch/trunk/libs/speex/libspeex/vq_sse.h
   freeswitch/trunk/libs/speex/libspeex/window.c
   freeswitch/trunk/libs/speex/ltmain.sh
   freeswitch/trunk/libs/speex/missing   (contents, props changed)
   freeswitch/trunk/libs/speex/speex.m4
   freeswitch/trunk/libs/speex/speex.pc.in
   freeswitch/trunk/libs/speex/src/   (props changed)
   freeswitch/trunk/libs/speex/src/Makefile.am
   freeswitch/trunk/libs/speex/src/Makefile.in
   freeswitch/trunk/libs/speex/src/getopt.c
   freeswitch/trunk/libs/speex/src/getopt1.c
   freeswitch/trunk/libs/speex/src/getopt_win.h
   freeswitch/trunk/libs/speex/src/skeleton.c
   freeswitch/trunk/libs/speex/src/skeleton.h
   freeswitch/trunk/libs/speex/src/speexdec.1
   freeswitch/trunk/libs/speex/src/speexdec.c
   freeswitch/trunk/libs/speex/src/speexenc.1
   freeswitch/trunk/libs/speex/src/speexenc.c
   freeswitch/trunk/libs/speex/src/wav_io.c
   freeswitch/trunk/libs/speex/src/wav_io.h
   freeswitch/trunk/libs/speex/src/wave_out.c
   freeswitch/trunk/libs/speex/src/wave_out.h
   freeswitch/trunk/libs/speex/symbian/   (props changed)
   freeswitch/trunk/libs/speex/symbian/Makefile.am
   freeswitch/trunk/libs/speex/symbian/Makefile.in
   freeswitch/trunk/libs/speex/symbian/bld.inf
   freeswitch/trunk/libs/speex/symbian/config.h
   freeswitch/trunk/libs/speex/symbian/speex.mmp
   freeswitch/trunk/libs/speex/ti/   (props changed)
   freeswitch/trunk/libs/speex/ti/Makefile.am
   freeswitch/trunk/libs/speex/ti/Makefile.in
   freeswitch/trunk/libs/speex/ti/config.h
   freeswitch/trunk/libs/speex/ti/speex_C54_test/   (props changed)
   freeswitch/trunk/libs/speex/ti/speex_C54_test/Makefile.am
   freeswitch/trunk/libs/speex/ti/speex_C54_test/Makefile.in
   freeswitch/trunk/libs/speex/ti/speex_C54_test/speex_C54_test.cmd
   freeswitch/trunk/libs/speex/ti/speex_C54_test/speex_C54_test.pjt
   freeswitch/trunk/libs/speex/ti/speex_C55_test/   (props changed)
   freeswitch/trunk/libs/speex/ti/speex_C55_test/Makefile.am
   freeswitch/trunk/libs/speex/ti/speex_C55_test/Makefile.in
   freeswitch/trunk/libs/speex/ti/speex_C55_test/speex_C55_test.cmd
   freeswitch/trunk/libs/speex/ti/speex_C55_test/speex_C55_test.pjt
   freeswitch/trunk/libs/speex/ti/speex_C64_test/   (props changed)
   freeswitch/trunk/libs/speex/ti/speex_C64_test/Makefile.am
   freeswitch/trunk/libs/speex/ti/speex_C64_test/Makefile.in
   freeswitch/trunk/libs/speex/ti/speex_C64_test/speex_C64_test.cmd
   freeswitch/trunk/libs/speex/ti/speex_C64_test/speex_C64_test.pjt
   freeswitch/trunk/libs/speex/ti/testenc-TI-C5x.c
   freeswitch/trunk/libs/speex/ti/testenc-TI-C64x.c
   freeswitch/trunk/libs/speex/ti/user_misc.h
   freeswitch/trunk/libs/speex/win32/   (props changed)
   freeswitch/trunk/libs/speex/win32/Makefile.am
   freeswitch/trunk/libs/speex/win32/Makefile.in
   freeswitch/trunk/libs/speex/win32/VS2003/   (props changed)
   freeswitch/trunk/libs/speex/win32/VS2003/Makefile.am
   freeswitch/trunk/libs/speex/win32/VS2003/Makefile.in
   freeswitch/trunk/libs/speex/win32/VS2003/libspeex/   (props changed)
   freeswitch/trunk/libs/speex/win32/VS2003/libspeex/Makefile.am
   freeswitch/trunk/libs/speex/win32/VS2003/libspeex/Makefile.in
   freeswitch/trunk/libs/speex/win32/VS2003/libspeex/libspeex.def
   freeswitch/trunk/libs/speex/win32/VS2003/libspeex/libspeex.vcproj
   freeswitch/trunk/libs/speex/win32/VS2003/speexdec/   (props changed)
   freeswitch/trunk/libs/speex/win32/VS2003/speexdec/Makefile.am
   freeswitch/trunk/libs/speex/win32/VS2003/speexdec/Makefile.in
   freeswitch/trunk/libs/speex/win32/VS2003/speexdec/speexdec.vcproj
   freeswitch/trunk/libs/speex/win32/VS2003/speexenc/   (props changed)
   freeswitch/trunk/libs/speex/win32/VS2003/speexenc/Makefile.am
   freeswitch/trunk/libs/speex/win32/VS2003/speexenc/Makefile.in
   freeswitch/trunk/libs/speex/win32/VS2003/speexenc/speexenc.vcproj
   freeswitch/trunk/libs/speex/win32/VS2005/   (props changed)
   freeswitch/trunk/libs/speex/win32/VS2005/Makefile.am
   freeswitch/trunk/libs/speex/win32/VS2005/Makefile.in
   freeswitch/trunk/libs/speex/win32/VS2005/libspeex/   (props changed)
   freeswitch/trunk/libs/speex/win32/VS2005/libspeex/Makefile.am
   freeswitch/trunk/libs/speex/win32/VS2005/libspeex/Makefile.in
   freeswitch/trunk/libs/speex/win32/VS2005/libspeex/libspeex.vcproj
   freeswitch/trunk/libs/speex/win32/VS2005/speexdec/   (props changed)
   freeswitch/trunk/libs/speex/win32/VS2005/speexdec/Makefile.am
   freeswitch/trunk/libs/speex/win32/VS2005/speexdec/Makefile.in
   freeswitch/trunk/libs/speex/win32/VS2005/speexdec/speexdec.vcproj
   freeswitch/trunk/libs/speex/win32/VS2005/speexenc/   (props changed)
   freeswitch/trunk/libs/speex/win32/VS2005/speexenc/Makefile.am
   freeswitch/trunk/libs/speex/win32/VS2005/speexenc/Makefile.in
   freeswitch/trunk/libs/speex/win32/VS2005/speexenc/speexenc.vcproj
   freeswitch/trunk/libs/speex/win32/config.h
   freeswitch/trunk/libs/speex/win32/libspeex/   (props changed)
   freeswitch/trunk/libs/speex/win32/libspeex/Makefile.am
   freeswitch/trunk/libs/speex/win32/libspeex/Makefile.in
   freeswitch/trunk/libs/speex/win32/libspeex/libspeex.dsp
   freeswitch/trunk/libs/speex/win32/libspeex/libspeex.dsw
   freeswitch/trunk/libs/speex/win32/libspeex/libspeex_dynamic.dsp
   freeswitch/trunk/libs/speex/win32/libspeex/speex.def
   freeswitch/trunk/libs/speex/win32/speex.iss   (contents, props changed)
   freeswitch/trunk/libs/speex/win32/speexdec/   (props changed)
   freeswitch/trunk/libs/speex/win32/speexdec/Makefile.am
   freeswitch/trunk/libs/speex/win32/speexdec/Makefile.in
   freeswitch/trunk/libs/speex/win32/speexdec/speexdec.dsp
   freeswitch/trunk/libs/speex/win32/speexdec/speexdec.dsw
   freeswitch/trunk/libs/speex/win32/speexenc/   (props changed)
   freeswitch/trunk/libs/speex/win32/speexenc/Makefile.am
   freeswitch/trunk/libs/speex/win32/speexenc/Makefile.in
   freeswitch/trunk/libs/speex/win32/speexenc/speexenc.dsp
   freeswitch/trunk/libs/speex/win32/speexenc/speexenc.dsw
Modified:
   freeswitch/trunk/src/mod/codecs/mod_speex/Makefile

Log:
add speex 1.2beta1 to in tree libs

Added: freeswitch/trunk/libs/speex/AUTHORS
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/AUTHORS	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,18 @@
+Jean-Marc Valin <jean-marc.valin at usherbrooke.ca>
+   All the code except the following
+
+David Rowe <david at rowetel.com>
+   lsp.c lsp.h 
+   Also ideas and feedback
+
+John Francis Edwards
+   wave_out.[ch], some #ifdefs for windows port and MSVC project files
+
+Segher Boessenkool
+   Misc. optimizations (for QMF in particular)
+
+Atsuhiko Yamanaka <ymnk at jcraft.com>:
+   Patch to speexenc.c to add Vorbis comment format
+
+Radim Kolar <hsn at cybermail.net>:
+   Patch to speexenc.c for supporting more input formats

Added: freeswitch/trunk/libs/speex/COPYING
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/COPYING	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,34 @@
+Copyright 2002-2006 
+        Xiph.org Foundation
+        Jean-Marc Valin
+        David Rowe
+        EpicGames
+        Analog Devices
+        Commonwealth Scientific and Industrial Research Organisation (CSIRO)
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+
+- Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+
+- Redistributions in binary form must reproduce the above copyright
+notice, this list of conditions and the following disclaimer in the
+documentation and/or other materials provided with the distribution.
+
+- Neither the name of the Xiph.org Foundation nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Added: freeswitch/trunk/libs/speex/ChangeLog
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ChangeLog	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,21 @@
+2005-09-07  Thomas Vander Stichele  <thomas at apestaart dot org>
+
+	* libspeex/cb_search.c: (split_cb_search_shape_sign_N1):
+	  add declaration for n, seems like an obvious build fix, slap
+	  me down if it's not
+
+2004-02-18 Jean-Marc Valin <jean-marc.valin at usherbrooke.ca>
+	Patch for compiling with mingw32 sent by j at thing.net 
+
+2004-02-18 Jean-Marc Valin <jean-marc.valin at usherbrooke.ca>
+	Integrated IRIX patch (getopt stuff) from Michael Pruett <michael at 68k.org> 
+
+2004-02-18 Jean-Marc Valin <jean-marc.valin at usherbrooke.ca>
+	Changed the Makefile.am so that KDevelop can parse SUBDIRS correctly 
+
+2002/03/27 Jean-Marc Valin:
+Working encoder and decoder for both narrowband and wideband.
+
+2002/02/27 Jean-Marc Valin:
+Got the basic encoder working as a demo with quantization only on some 
+parameters.

Added: freeswitch/trunk/libs/speex/INSTALL
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/INSTALL	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,8 @@
+Installing Speex is as easy as:
+
+% ./configure [--prefix=<install-path>]
+% make
+% make install
+
+Note that if you are using the code from SVN, you will need to run "autogen.sh"
+instead of "configure".

Added: freeswitch/trunk/libs/speex/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,21 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# To disable automatic dependency tracking if using other tools than
+# gcc and gmake, add the option 'no-dependencies'
+AUTOMAKE_OPTIONS = 1.8
+
+m4datadir = $(datadir)/aclocal
+m4data_DATA = speex.m4
+
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = speex.pc
+
+EXTRA_DIST = Speex.spec Speex.spec.in Speex.kdevelop speex.m4 speex.pc.in README.blackfin README.symbian README.TI-DSP
+
+#Fools KDevelop into including all files
+SUBDIRS = libspeex include @src@ doc win32 symbian ti
+
+DIST_SUBDIRS = libspeex include src doc win32 symbian ti
+
+rpm: dist
+	rpmbuild -ta ${PACKAGE}-${VERSION}.tar.gz

Added: freeswitch/trunk/libs/speex/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,669 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(srcdir)/Speex.spec.in \
+	$(srcdir)/config.h.in $(srcdir)/speex.pc.in \
+	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
+	TODO config.guess config.sub depcomp install-sh ltmain.sh \
+	missing
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno configure.status.lineno
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = Speex.spec speex.pc
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-exec-recursive install-info-recursive \
+	install-recursive installcheck-recursive installdirs-recursive \
+	pdf-recursive ps-recursive uninstall-info-recursive \
+	uninstall-recursive
+am__installdirs = "$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)"
+m4dataDATA_INSTALL = $(INSTALL_DATA)
+pkgconfigDATA_INSTALL = $(INSTALL_DATA)
+DATA = $(m4data_DATA) $(pkgconfig_DATA)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d $(distdir) \
+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+
+# To disable automatic dependency tracking if using other tools than
+# gcc and gmake, add the option 'no-dependencies'
+AUTOMAKE_OPTIONS = 1.8
+m4datadir = $(datadir)/aclocal
+m4data_DATA = speex.m4
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = speex.pc
+EXTRA_DIST = Speex.spec Speex.spec.in Speex.kdevelop speex.m4 speex.pc.in README.blackfin README.symbian README.TI-DSP
+
+#Fools KDevelop into including all files
+SUBDIRS = libspeex include @src@ doc win32 symbian ti
+DIST_SUBDIRS = libspeex include src doc win32 symbian ti
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+am--refresh:
+	@:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
+	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.h: stamp-h1
+	@if test ! -f $@; then \
+	  rm -f stamp-h1; \
+	  $(MAKE) stamp-h1; \
+	else :; fi
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
+	cd $(top_srcdir) && $(AUTOHEADER)
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+Speex.spec: $(top_builddir)/config.status $(srcdir)/Speex.spec.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+speex.pc: $(top_builddir)/config.status $(srcdir)/speex.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+install-m4dataDATA: $(m4data_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(m4datadir)" || $(mkdir_p) "$(DESTDIR)$(m4datadir)"
+	@list='$(m4data_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(m4dataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(m4datadir)/$$f'"; \
+	  $(m4dataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(m4datadir)/$$f"; \
+	done
+
+uninstall-m4dataDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(m4data_DATA)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f '$(DESTDIR)$(m4datadir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(m4datadir)/$$f"; \
+	done
+install-pkgconfigDATA: $(pkgconfig_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)"
+	@list='$(pkgconfig_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
+	  $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
+	done
+
+uninstall-pkgconfigDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkgconfig_DATA)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
+	done
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	mkdir $(distdir)
+	$(mkdir_p) $(distdir)/. $(distdir)/include/speex
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || mkdir "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="../$(top_distdir)" \
+	        distdir="../$(distdir)/$$subdir" \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
+	*.tar.bz2*) \
+	  bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && cd $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+distuninstallcheck:
+	@cd $(distuninstallcheck_dir) \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(DATA) config.h
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)"; do \
+	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-m4dataDATA install-pkgconfigDATA
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am uninstall-m4dataDATA \
+	uninstall-pkgconfigDATA
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
+	check-am clean clean-generic clean-libtool clean-recursive \
+	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
+	dist-shar dist-tarZ dist-zip distcheck distclean \
+	distclean-generic distclean-hdr distclean-libtool \
+	distclean-recursive distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am \
+	install-m4dataDATA install-man install-pkgconfigDATA \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	maintainer-clean-recursive mostlyclean mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
+	tags tags-recursive uninstall uninstall-am uninstall-info-am \
+	uninstall-m4dataDATA uninstall-pkgconfigDATA
+
+
+rpm: dist
+	rpmbuild -ta ${PACKAGE}-${VERSION}.tar.gz
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/NEWS
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/NEWS	Wed Dec 20 13:13:27 2006
@@ -0,0 +1 @@
+2002/02/13: Creation of the "Speex" project

Added: freeswitch/trunk/libs/speex/README
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/README	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,9 @@
+See INSTALL file for instruction on how to install Speex.
+
+The Speex is a patent-free, Open Source/Free Software voice codec. Unlike other codecs like MP3 and Ogg Vorbis, Speex is designed to compress voice at bitrates in the 2-45 kbps range. Possible applications include VoIP, internet audio streaming, archiving of speech data (e.g. voice mail), and audio books. In some sense, it is meant to be complementary to the Ogg Vorbis codec.
+
+To use the Speex command line tools:
+
+% speexenc [options] input_file.wav compressed_file.spx
+
+% speexdec [options] compressed_file.spx output_file.wav

Added: freeswitch/trunk/libs/speex/README.TI-DSP
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/README.TI-DSP	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,56 @@
+These are all of the changes and additions necessary to build a loopback application for the 
+TI C6415, C5509A, or C5416 simulators using the TI Code Composer Studio (CCS) development system.  
+A trial version of the tools can be downloaded from the TI website.
+
+This build runs 8kbps narrowband, with minimum complexity.
+
+Several changes are introduced in Speex 1.1.11 which are used in these applications:
+
+arch.h: Added switch for compilers not supporting "long long" (C55x does, C54x, CCS 2.x C64x does not)
+bits.c: Allow external definition for max buffer size, changed MAX_BYTES_PER_FRAME
+        to MAX_CHARS_PER_FRAME for consistency
+misc.c: Added override switches to alloc routines, conditional include of user file "user_misc.h".
+        These changes allow manual memory allocation rather than using heap
+
+The arch.h change allows operation with 2.x versions of Code Composer Studio.
+The bits.c change reduces the data memory usage.
+The misc.c change allows private memory allocation, for cases where it is not
+desirable to use the normal heap.
+
+Added files:
+
+testenc-TI-C5x.c  (For C54x and C55x builds, derived from testenc.c, 
+                       manual alloc, byte packing/unpacking added)
+testenc-TI-C64x.c  (For C64x builds, derived from testenc.c, manual alloc, byte packing/unpacking added)
+
+config.h (not automatically generated, sets memory sizes, enables/disables manual alloc)
+user_misc.h (contains the manual memory alloc routines, with debug code to display mem usage)
+speex\speex_config_types.h (match Speex types to compiler types, not generated from types.in)
+
+speex_c54_test\speex_c54_test.cmd (C5416 linker command file)
+speex_c54_test\speex_c54_test.pjt (Code Composer Studio Project File )
+speex_c55_test\speex_c55_test.cmd (C5509A linker command file)
+speex_c55_test\speex_c55_test.pjt (Code Composer Studio Project File )
+speex_c64_test\speex_c64_test.cmd (C6415 linker command file)
+speex_c64_test\speex_c64_test.pjt (Code Composer Studio Project File )
+
+samples\male.snd  
+
+Usage:
+1. Create a Speex 1.1.11 (or later) source tree.
+2. Edit the files testenc-TI-C5x.c and/or testenc-TI-C64x.c to change the hard-coded path 
+   for the test audio and data files.
+   This build uses the file e:\speextrunktest\samples\male.snd.
+   Note:  This is a headerless 16-bit stereo audio file derived from the male.wav test file 
+          http://www.speex.org/samples/male.wav
+3. Edit the .pjt file with a text editor and change projdir or projectdir to the correct path 
+   (one place near the top of the file).
+4. Edit config.h if desired, to change the memory allocation method (calloc or manual),
+   and to enable/disable debug prints for the memory allocation 
+   (this makes it easier to determine the required size).
+5. Run Code Composer Studio, and open the project for the desired target (e.g. speex_c55_test).
+   Note that the correct simulator must be selected (in CCS Setup) before starting CCS.
+6. Build and run the simulation.
+
+Note that assembly optimizations will be required to run C54x in real time.
+There are no assembly optimizations in any of these builds.

Added: freeswitch/trunk/libs/speex/README.blackfin
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/README.blackfin	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,21 @@
+Speex has been ported to the Blackfin DSP, for the STAMP development board.
+
+This port has been tested on the STAMP development board and requires the 
+toolchain available at http://blackfin.uclinux.org/
+
+1/ In order to cross-compile for uClinux from the Speex tarball:
+
+  ./configure --enable-blackfin-asm --enable-fixed-point --host=bfin-uclinux
+  cd libspeex
+  make
+
+The --enable-blackfin-asm option is not required, but it speeds up Speex by
+approximately a factor of two.
+
+2/ In order to cross-compile for uClinux from the Speex SVN:
+
+  svn co http://svn.xiph.org/trunk/speex speex-trunk
+  cd speex-trunk
+  ./autogen.sh --enable-blackfin-asm --enable-fixed-point --host=bfin-uclinux
+  cd libspeex
+  make

Added: freeswitch/trunk/libs/speex/README.symbian
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/README.symbian	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,43 @@
+Using Speex on Symbian OS
+Conrad Parker and Colin Ward, CSIRO Australia, July 2004
+
+
+Introduction
+------------
+
+The symbian/ directory contains the following files for Symbian's abuild tool:
+
+  bld.inf    Component definition file
+  speex.mmp  Project specification file
+  config.h   Configuration options for both emulator and device builds
+
+
+Developing applications for libspeex for Symbian OS
+---------------------------------------------------
+
+     Any references to the statically defined SpeexMode structures must be
+     replaced by a call to a speex_lib_get_mode () for that mode.
+
+     * References to the statically defined array speex_mode_list[modeID]
+     must be replaced by a call to speex_lib_get_mode (modeID):
+
+-      mode = speex_mode_list[modeID];
++      mode = speex_lib_get_mode (modeID);
+
+     * References to the statically defined mode structures must be replaced:
+
+       SpeexMode * mode1, * mode2, * mode3;
+
+-      mode1 = &speex_nb_mode;
++      mode1 = speex_lib_get_mode (SPEEX_MODEID_NB);
+
+-      mode2 = &speex_wb_mode;
++      mode2 = speex_lib_get_mode (SPEEX_MODEID_WB);
+
+-      mode3 = &speex_uwb_mode;
++      mode3 = speex_lib_get_mode (SPEEX_MODEID_UWB);
+
+     Note that the constants SPEEX_MODEID_NB, SPEEX_MODEID_WB and
+     SPEEX_MODEID_UWB were introduced in libspeex 1.1.6, and are
+     defined in <speex/speex.h>. speex_lib_get_mode() was introduced
+     in libspeex 1.1.7 and is declared in <speex/speex.h>.

Added: freeswitch/trunk/libs/speex/Speex.kdevelop
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/Speex.kdevelop	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,123 @@
+<?xml version = '1.0'?>
+<kdevelop>
+  <general>
+    <author>Jean-Marc Valin</author>
+    <email>jean-marc.valin at usherbrooke.ca</email>
+    <version>$VERSION$</version>
+    <projectmanagement>KDevAutoProject</projectmanagement>
+    <primarylanguage>C</primarylanguage>
+    <ignoreparts/>
+    <projectdirectory>.</projectdirectory>
+    <absoluteprojectpath>false</absoluteprojectpath>
+    <description/>
+    <secondaryLanguages/>
+  </general>
+  <kdevautoproject>
+    <general>
+      <activetarget>libspeex/libspeex.la</activetarget>
+      <useconfiguration>default</useconfiguration>
+    </general>
+    <run>
+      <mainprogram>src/Speex</mainprogram>
+      <directoryradio>executable</directoryradio>
+      <customdirectory>/</customdirectory>
+      <programargs/>
+      <terminal>false</terminal>
+      <autocompile>true</autocompile>
+      <envvars/>
+    </run>
+    <configurations>
+      <optimized>
+        <builddir>optimized</builddir>
+        <ccompiler>GccOptions</ccompiler>
+        <cxxcompiler>GppOptions</cxxcompiler>
+        <f77compiler>G77Options</f77compiler>
+        <cflags>-O2 -g0</cflags>
+      </optimized>
+      <debug>
+        <configargs>--enable-debug=full</configargs>
+        <builddir>debug</builddir>
+        <ccompiler>GccOptions</ccompiler>
+        <cxxcompiler>GppOptions</cxxcompiler>
+        <f77compiler>G77Options</f77compiler>
+        <cflags>-O0 -g3</cflags>
+      </debug>
+    </configurations>
+    <make>
+      <envvars>
+        <envvar value="1" name="WANT_AUTOCONF_2_5" />
+        <envvar value="1" name="WANT_AUTOMAKE_1_6" />
+      </envvars>
+      <abortonerror>false</abortonerror>
+      <numberofjobs>1</numberofjobs>
+      <dontact>false</dontact>
+      <makebin/>
+    </make>
+  </kdevautoproject>
+  <kdevdebugger>
+    <general>
+      <dbgshell>libtool</dbgshell>
+      <programargs/>
+      <gdbpath/>
+      <configGdbScript/>
+      <runShellScript/>
+      <runGdbScript/>
+      <breakonloadinglibs>true</breakonloadinglibs>
+      <separatetty>false</separatetty>
+      <floatingtoolbar>false</floatingtoolbar>
+    </general>
+    <display>
+      <staticmembers>false</staticmembers>
+      <demanglenames>true</demanglenames>
+    </display>
+  </kdevdebugger>
+  <kdevfilecreate>
+    <filetypes/>
+    <useglobaltypes>
+      <type ext="c" />
+      <type ext="h" />
+    </useglobaltypes>
+  </kdevfilecreate>
+  <kdevcppsupport>
+    <references/>
+    <codecompletion>
+      <includeGlobalFunctions>true</includeGlobalFunctions>
+      <includeTypes>true</includeTypes>
+      <includeEnums>true</includeEnums>
+      <includeTypedefs>false</includeTypedefs>
+      <automaticCodeCompletion>true</automaticCodeCompletion>
+      <automaticArgumentsHint>true</automaticArgumentsHint>
+      <automaticHeaderCompletion>true</automaticHeaderCompletion>
+      <codeCompletionDelay>250</codeCompletionDelay>
+      <argumentsHintDelay>400</argumentsHintDelay>
+      <headerCompletionDelay>250</headerCompletionDelay>
+    </codecompletion>
+  </kdevcppsupport>
+  <kdevfileview>
+    <groups>
+      <hidenonprojectfiles>false</hidenonprojectfiles>
+      <hidenonlocation>false</hidenonlocation>
+    </groups>
+    <tree>
+      <hidepatterns>*.o,*.lo,CVS</hidepatterns>
+      <hidenonprojectfiles>true</hidenonprojectfiles>
+    </tree>
+  </kdevfileview>
+  <kdevdoctreeview>
+    <projectdoc>
+      <userdocDir>html/</userdocDir>
+      <apidocDir>html/</apidocDir>
+    </projectdoc>
+    <ignoreqt_xml/>
+    <ignoredoxygen/>
+    <ignorekdocs/>
+    <ignoretocs/>
+    <ignoredevhelp/>
+  </kdevdoctreeview>
+  <cppsupportpart>
+    <filetemplates>
+      <interfacesuffix>.h</interfacesuffix>
+      <implementationsuffix>.cpp</implementationsuffix>
+    </filetemplates>
+  </cppsupportpart>
+</kdevelop>

Added: freeswitch/trunk/libs/speex/Speex.spec
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/Speex.spec	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,70 @@
+%define name     speex
+%define ver      1.2beta1
+%define rel      1
+
+Summary: An open-source, patent-free speech codec
+Name: %name
+Version: %ver
+Release: %rel
+License: BSD
+Group: Application/Devel
+Source: http://www.speex.org/download/%{name}-%{ver}.tar.gz
+URL: http://www.speex.org/
+Vendor: Speex
+Packager: Jean-Marc Valin (jean-marc.valin at usherbrooke.ca)
+BuildRoot: /var/tmp/%{name}-build-root
+Docdir: /usr/share/doc
+
+%description
+Speex is a patent-free audio codec designed especially for voice (unlike 
+Vorbis which targets general audio) signals and providing good narrowband 
+and wideband quality. This project aims to be complementary to the Vorbis
+codec.
+
+%package devel
+Summary:	Speex development files
+Group:		Development/Libraries
+Requires:	%{name} = %{version}
+
+%description devel
+Speex development files.
+
+%changelog
+* Thu Oct 03 2002 Jean-Marc Valin 
+- Added devel package inspired from PLD spec file
+
+* Tue Jul 30 2002 Fredrik Rambris <boost at users.sourceforge.net> 0.5.2
+- Added buildroot and docdir and ldconfig. Makes it builadble by non-roots
+  and also doesn't write to actual library paths when building.
+
+%prep
+%setup
+
+%build
+export CFLAGS='-O3'
+./configure --prefix=/usr --enable-shared --enable-static
+make
+
+%install
+rm -rf $RPM_BUILD_ROOT
+make DESTDIR=$RPM_BUILD_ROOT install
+
+%post -p /sbin/ldconfig
+%postun -p /sbin/ldconfig
+
+%files
+%defattr(644,root,root,755)
+%doc COPYING AUTHORS ChangeLog NEWS README
+%doc doc/manual.pdf
+/usr/share/man/man1/speexenc.1*
+/usr/share/man/man1/speexdec.1*
+%attr(755,root,root) %{_bindir}/speex*
+%attr(755,root,root) %{_libdir}/libspeex*.so*
+
+%files devel
+%defattr(644,root,root,755)
+%attr(755,root,root) %{_libdir}/libspeex*.la
+%{_includedir}/speex/speex*.h
+/usr/share/aclocal/speex.m4
+%{_libdir}/pkgconfig/speex.pc
+%{_libdir}/libspeex*.a

Added: freeswitch/trunk/libs/speex/Speex.spec.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/Speex.spec.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,70 @@
+%define name     @PACKAGE@
+%define ver      @VERSION@
+%define rel      1
+
+Summary: An open-source, patent-free speech codec
+Name: %name
+Version: %ver
+Release: %rel
+License: BSD
+Group: Application/Devel
+Source: http://www.speex.org/download/%{name}-%{ver}.tar.gz
+URL: http://www.speex.org/
+Vendor: Speex
+Packager: Jean-Marc Valin (jean-marc.valin at usherbrooke.ca)
+BuildRoot: /var/tmp/%{name}-build-root
+Docdir: /usr/share/doc
+
+%description
+Speex is a patent-free audio codec designed especially for voice (unlike 
+Vorbis which targets general audio) signals and providing good narrowband 
+and wideband quality. This project aims to be complementary to the Vorbis
+codec.
+
+%package devel
+Summary:	Speex development files
+Group:		Development/Libraries
+Requires:	%{name} = %{version}
+
+%description devel
+Speex development files.
+
+%changelog
+* Thu Oct 03 2002 Jean-Marc Valin 
+- Added devel package inspired from PLD spec file
+
+* Tue Jul 30 2002 Fredrik Rambris <boost at users.sourceforge.net> 0.5.2
+- Added buildroot and docdir and ldconfig. Makes it builadble by non-roots
+  and also doesn't write to actual library paths when building.
+
+%prep
+%setup
+
+%build
+export CFLAGS='-O3'
+./configure --prefix=/usr --enable-shared --enable-static
+make
+
+%install
+rm -rf $RPM_BUILD_ROOT
+make DESTDIR=$RPM_BUILD_ROOT install
+
+%post -p /sbin/ldconfig
+%postun -p /sbin/ldconfig
+
+%files
+%defattr(644,root,root,755)
+%doc COPYING AUTHORS ChangeLog NEWS README
+%doc doc/manual.pdf
+/usr/share/man/man1/speexenc.1*
+/usr/share/man/man1/speexdec.1*
+%attr(755,root,root) %{_bindir}/speex*
+%attr(755,root,root) %{_libdir}/libspeex*.so*
+
+%files devel
+%defattr(644,root,root,755)
+%attr(755,root,root) %{_libdir}/libspeex*.la
+%{_includedir}/speex/speex*.h
+/usr/share/aclocal/speex.m4
+%{_libdir}/pkgconfig/speex.pc
+%{_libdir}/libspeex*.a

Added: freeswitch/trunk/libs/speex/TODO
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/TODO	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,35 @@
+Better saturation handling in mdf?
+get rid of crap that shouldn't be exposed in speex.h
+
+Would be nice:
+
+Allocator override (speex_lib_ctl)
+Better error handling
+Fixed-point:
+  - Wideband
+  - Initialization
+  - Jitter buffer
+Denoiser:
+  - Smooth gain (remove musical noise)
+  - Better noise adaptation
+  - Do some tuning
+AGC:
+  - Use median filtering instead of "non-linear mean"
+
+
+
+Features
+-Add maximum/minimum bit-rate control for VBR
+-Improve error handling (with perror-like call?)
+
+Long-term quality improvements
+-Improve perceptual enhancement (including wideband)
+
+Standards
+-Complete Speex RTP profile
+-MIME type registration
+
+ideas:
+Peelable stream (double codebook, higher bands, stereo)
+LPC from spectral domain
+Better psycho-acoustic model. Masking curve from Vorbis?

Added: freeswitch/trunk/libs/speex/acinclude.m4
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/acinclude.m4	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,102 @@
+# Configure paths for libogg
+# Jack Moffitt <jack at icecast.org> 10-21-2000
+# Shamelessly stolen from Owen Taylor and Manish Singh
+
+dnl XIPH_PATH_OGG([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
+dnl Test for libogg, and define OGG_CFLAGS and OGG_LIBS
+dnl
+AC_DEFUN([XIPH_PATH_OGG],
+[dnl 
+dnl Get the cflags and libraries
+dnl
+AC_ARG_WITH(ogg,[  --with-ogg=PFX   Prefix where libogg is installed (optional)], ogg_prefix="$withval", ogg_prefix="")
+AC_ARG_WITH(ogg-libraries,[  --with-ogg-libraries=DIR   Directory where libogg library is installed (optional)], ogg_libraries="$withval", ogg_libraries="")
+AC_ARG_WITH(ogg-includes,[  --with-ogg-includes=DIR   Directory where libogg header files are installed (optional)], ogg_includes="$withval", ogg_includes="")
+AC_ARG_ENABLE(oggtest, [  --disable-oggtest       Do not try to compile and run a test Ogg program],, enable_oggtest=yes)
+
+  if test "x$ogg_libraries" != "x" ; then
+    OGG_LIBS="-L$ogg_libraries"
+  elif test "x$ogg_prefix" != "x" ; then
+    OGG_LIBS="-L$ogg_prefix/lib"
+  elif test "x$prefix" != "xNONE" ; then
+    OGG_LIBS="-L$prefix/lib"
+  fi
+
+  OGG_LIBS="$OGG_LIBS -logg"
+
+  if test "x$ogg_includes" != "x" ; then
+    OGG_CFLAGS="-I$ogg_includes"
+  elif test "x$ogg_prefix" != "x" ; then
+    OGG_CFLAGS="-I$ogg_prefix/include"
+  elif test "x$prefix" != "xNONE"; then
+    OGG_CFLAGS="-I$prefix/include"
+  fi
+
+  AC_MSG_CHECKING(for Ogg)
+  no_ogg=""
+
+
+  if test "x$enable_oggtest" = "xyes" ; then
+    ac_save_CFLAGS="$CFLAGS"
+    ac_save_LIBS="$LIBS"
+    CFLAGS="$CFLAGS $OGG_CFLAGS"
+    LIBS="$LIBS $OGG_LIBS"
+dnl
+dnl Now check if the installed Ogg is sufficiently new.
+dnl
+      rm -f conf.oggtest
+      AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <ogg/ogg.h>
+
+int main ()
+{
+  system("touch conf.oggtest");
+  return 0;
+}
+
+],, no_ogg=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+  fi
+
+  if test "x$no_ogg" = "x" ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$1], , :, [$1])     
+  else
+     AC_MSG_RESULT(no)
+     if test -f conf.oggtest ; then
+       :
+     else
+       echo "*** Could not run Ogg test program, checking why..."
+       CFLAGS="$CFLAGS $OGG_CFLAGS"
+       LIBS="$LIBS $OGG_LIBS"
+       AC_TRY_LINK([
+#include <stdio.h>
+#include <ogg/ogg.h>
+],     [ return 0; ],
+       [ echo "*** The test program compiled, but did not run. This usually means"
+       echo "*** that the run-time linker is not finding Ogg or finding the wrong"
+       echo "*** version of Ogg. If it is not finding Ogg, you'll need to set your"
+       echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+       echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+       echo "*** is required on your system"
+       echo "***"
+       echo "*** If you have an old version installed, it is best to remove it, although"
+       echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+       [ echo "*** The test program failed to compile or link. See the file config.log for the"
+       echo "*** exact error that occured. This usually means Ogg was incorrectly installed"
+       echo "*** or that you have moved Ogg since it was installed." ])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+     OGG_CFLAGS=""
+     OGG_LIBS=""
+     ifelse([$2], , :, [$2])
+  fi
+  AC_SUBST(OGG_CFLAGS)
+  AC_SUBST(OGG_LIBS)
+  rm -f conf.oggtest
+])

Added: freeswitch/trunk/libs/speex/aclocal.m4
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/aclocal.m4	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,7378 @@
+# generated automatically by aclocal 1.8.5 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+# Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+
+# serial 48 Debian 1.5.22-2 AC_PROG_LIBTOOL
+
+
+# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
+# -----------------------------------------------------------
+# If this macro is not defined by Autoconf, define it here.
+m4_ifdef([AC_PROVIDE_IFELSE],
+         [],
+         [m4_define([AC_PROVIDE_IFELSE],
+	         [m4_ifdef([AC_PROVIDE_$1],
+		           [$2], [$3])])])
+
+
+# AC_PROG_LIBTOOL
+# ---------------
+AC_DEFUN([AC_PROG_LIBTOOL],
+[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
+dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
+dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
+  AC_PROVIDE_IFELSE([AC_PROG_CXX],
+    [AC_LIBTOOL_CXX],
+    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
+  ])])
+dnl And a similar setup for Fortran 77 support
+  AC_PROVIDE_IFELSE([AC_PROG_F77],
+    [AC_LIBTOOL_F77],
+    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
+])])
+
+dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
+dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
+dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
+  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+    [AC_LIBTOOL_GCJ],
+    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+      [AC_LIBTOOL_GCJ],
+      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
+	[AC_LIBTOOL_GCJ],
+      [ifdef([AC_PROG_GCJ],
+	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+       ifdef([A][M_PROG_GCJ],
+	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+       ifdef([LT_AC_PROG_GCJ],
+	     [define([LT_AC_PROG_GCJ],
+		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
+])])# AC_PROG_LIBTOOL
+
+
+# _AC_PROG_LIBTOOL
+# ----------------
+AC_DEFUN([_AC_PROG_LIBTOOL],
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Prevent multiple expansion
+define([AC_PROG_LIBTOOL], [])
+])# _AC_PROG_LIBTOOL
+
+
+# AC_LIBTOOL_SETUP
+# ----------------
+AC_DEFUN([AC_LIBTOOL_SETUP],
+[AC_PREREQ(2.50)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+
+AC_REQUIRE([AC_PROG_LN_S])dnl
+AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+AC_REQUIRE([AC_OBJEXT])dnl
+AC_REQUIRE([AC_EXEEXT])dnl
+dnl
+
+AC_LIBTOOL_SYS_MAX_CMD_LEN
+AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+AC_LIBTOOL_OBJDIR
+
+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+_LT_AC_PROG_ECHO_BACKSLASH
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
+
+# Same as above, but do not quote variable references.
+[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+# Constants:
+rm="rm -f"
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+AC_CHECK_TOOL(AR, ar, false)
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(STRIP, strip, :)
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$SED" && SED=sed
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    AC_PATH_MAGIC
+  fi
+  ;;
+esac
+
+AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+enable_win32_dll=yes, enable_win32_dll=no)
+
+AC_ARG_ENABLE([libtool-lock],
+    [AC_HELP_STRING([--disable-libtool-lock],
+	[avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+AC_ARG_WITH([pic],
+    [AC_HELP_STRING([--with-pic],
+	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [pic_mode="$withval"],
+    [pic_mode=default])
+test -z "$pic_mode" && pic_mode=default
+
+# Use C for the default configuration in the libtool script
+tagname=
+AC_LIBTOOL_LANG_C_CONFIG
+_LT_AC_TAGCONFIG
+])# AC_LIBTOOL_SETUP
+
+
+# _LT_AC_SYS_COMPILER
+# -------------------
+AC_DEFUN([_LT_AC_SYS_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_AC_SYS_COMPILER
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+AC_DEFUN([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+  case $cc_temp in
+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+AC_DEFUN([_LT_COMPILER_BOILERPLATE],
+[ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+AC_DEFUN([_LT_LINKER_BOILERPLATE],
+[ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+])# _LT_LINKER_BOILERPLATE
+
+
+# _LT_AC_SYS_LIBPATH_AIX
+# ----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
+[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi],[])
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+])# _LT_AC_SYS_LIBPATH_AIX
+
+
+# _LT_AC_SHELL_INIT(ARG)
+# ----------------------
+AC_DEFUN([_LT_AC_SHELL_INIT],
+[ifdef([AC_DIVERSION_NOTICE],
+	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+	 [AC_DIVERT_PUSH(NOTICE)])
+$1
+AC_DIVERT_POP
+])# _LT_AC_SHELL_INIT
+
+
+# _LT_AC_PROG_ECHO_BACKSLASH
+# --------------------------
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
+AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
+[_LT_AC_SHELL_INIT([
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+  ;;
+esac
+
+echo=${ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X[$]1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+fi
+
+if test "X[$]1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+[$]*
+EOF
+  exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
+       echo_test_string=`eval $cmd` &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+    then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+   test "X$echo_testing_string" = "X$echo_test_string"; then
+  :
+else
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for dir in $PATH /usr/ucb; do
+    IFS="$lt_save_ifs"
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running configure again with it.
+      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+    else
+      # Try using printf.
+      echo='printf %s\n'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+	 test "X$echo_testing_string" = "X$echo_test_string"; then
+	# Cool, printf works
+	:
+      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	export CONFIG_SHELL
+	SHELL="$CONFIG_SHELL"
+	export SHELL
+	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+      else
+	# maybe with a smaller string...
+	prev=:
+
+	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+	  then
+	    break
+	  fi
+	  prev="$cmd"
+	done
+
+	if test "$prev" != 'sed 50q "[$]0"'; then
+	  echo_test_string=`eval $prev`
+	  export echo_test_string
+	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+	else
+	  # Oops.  We lost completely, so just stick with echo.
+	  echo=echo
+	fi
+      fi
+    fi
+  fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+fi
+
+AC_SUBST(ECHO)
+])])# _LT_AC_PROG_ECHO_BACKSLASH
+
+
+# _LT_AC_LOCK
+# -----------
+AC_DEFUN([_LT_AC_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+    [AC_HELP_STRING([--disable-libtool-lock],
+	[avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *ELF-32*)
+      HPUX_IA64_MODE="32"
+      ;;
+    *ELF-64*)
+      HPUX_IA64_MODE="64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+   if test "$lt_cv_prog_gnu_ld" = yes; then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -melf32bsmip"
+      ;;
+    *N32*)
+      LD="${LD-ld} -melf32bmipn32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -melf64bmip"
+      ;;
+    esac
+   else
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+   fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+    *32-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_i386"
+          ;;
+        ppc64-*linux*|powerpc64-*linux*)
+          LD="${LD-ld} -m elf32ppclinux"
+          ;;
+        s390x-*linux*)
+          LD="${LD-ld} -m elf_s390"
+          ;;
+        sparc64-*linux*)
+          LD="${LD-ld} -m elf32_sparc"
+          ;;
+      esac
+      ;;
+    *64-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        ppc*-*linux*|powerpc*-*linux*)
+          LD="${LD-ld} -m elf64ppc"
+          ;;
+        s390*-*linux*)
+          LD="${LD-ld} -m elf64_s390"
+          ;;
+        sparc*-*linux*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_LANG_PUSH(C)
+     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LANG_POP])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+sparc*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      *)    LD="${LD-ld} -64" ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+  ])
+esac
+
+need_locks="$enable_libtool_lock"
+
+])# _LT_AC_LOCK
+
+
+# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
+[AC_REQUIRE([LT_AC_PROG_SED])
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$3"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       $2=yes
+     fi
+   fi
+   $rm conftest*
+])
+
+if test x"[$]$2" = xyes; then
+    ifelse([$5], , :, [$5])
+else
+    ifelse([$6], , :, [$6])
+fi
+])# AC_LIBTOOL_COMPILER_OPTION
+
+
+# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                          [ACTION-SUCCESS], [ACTION-FAILURE])
+# ------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
+[AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $3"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&AS_MESSAGE_LOG_FD
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         $2=yes
+       fi
+     else
+       $2=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+    ifelse([$4], , :, [$4])
+else
+    ifelse([$5], , :, [$5])
+fi
+])# AC_LIBTOOL_LINKER_OPTION
+
+
+# AC_LIBTOOL_SYS_MAX_CMD_LEN
+# --------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
+[# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+  i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ 	]]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    # If test is not a shell built-in, we'll probably end up computing a
+    # maximum length that is only half of the actual maximum length, but
+    # we can't tell.
+    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+    while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+	       = "XX$teststring") >/dev/null 2>&1 &&
+	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
+	    lt_cv_sys_max_cmd_len=$new_result &&
+	    test $i != 17 # 1/2 MB should be enough
+    do
+      i=`expr $i + 1`
+      teststring=$teststring$teststring
+    done
+    teststring=
+    # Add a significant safety factor because C++ compilers can tack on massive
+    # amounts of additional arguments before passing them to the linker.
+    # It appears as though 1/2 is a usable value.
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    ;;
+  esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+  AC_MSG_RESULT(none)
+fi
+])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+
+
+# _LT_AC_CHECK_DLFCN
+# ------------------
+AC_DEFUN([_LT_AC_CHECK_DLFCN],
+[AC_CHECK_HEADERS(dlfcn.h)dnl
+])# _LT_AC_CHECK_DLFCN
+
+
+# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ---------------------------------------------------------------------
+AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+  [$4]
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+[#line __oline__ "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+    exit (status);
+}]
+EOF
+  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) $1 ;;
+      x$lt_dlneed_uscore) $2 ;;
+      x$lt_dlunknown|x*) $3 ;;
+    esac
+  else :
+    # compilation failed
+    $3
+  fi
+fi
+rm -fr conftest*
+])# _LT_AC_TRY_DLOPEN_SELF
+
+
+# AC_LIBTOOL_DLOPEN_SELF
+# ----------------------
+AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+   ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+   ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ])
+   ;;
+
+  *)
+    AC_CHECK_FUNC([shl_load],
+	  [lt_cv_dlopen="shl_load"],
+      [AC_CHECK_LIB([dld], [shl_load],
+	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+	[AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen="dlopen"],
+	  [AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+	    [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+	      ])
+	    ])
+	  ])
+	])
+      ])
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    AC_CACHE_CHECK([whether a program can dlopen itself],
+	  lt_cv_dlopen_self, [dnl
+	  _LT_AC_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+    ])
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+    	  lt_cv_dlopen_self_static, [dnl
+	  _LT_AC_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
+      ])
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+])# AC_LIBTOOL_DLOPEN_SELF
+
+
+# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
+# ---------------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler
+AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+     fi
+   fi
+   chmod u+w . 2>&AS_MESSAGE_LOG_FD
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+])
+])# AC_LIBTOOL_PROG_CC_C_O
+
+
+# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
+# -----------------------------------------
+# Check to see if we can do hard links to lock some files if needed
+AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
+[AC_REQUIRE([_LT_AC_LOCK])dnl
+
+hard_links="nottested"
+if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  AC_MSG_CHECKING([if we can lock with hard links])
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  AC_MSG_RESULT([$hard_links])
+  if test "$hard_links" = no; then
+    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
+
+
+# AC_LIBTOOL_OBJDIR
+# -----------------
+AC_DEFUN([AC_LIBTOOL_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+])# AC_LIBTOOL_OBJDIR
+
+
+# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
+# ----------------------------------------------
+# Check hardcoding attributes.
+AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_AC_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
+   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
+   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
+    # Linking always hardcodes the temporary library directory.
+    _LT_AC_TAGVAR(hardcode_action, $1)=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
+
+if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+
+
+# AC_LIBTOOL_SYS_LIB_STRIP
+# ------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
+[striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+   darwin*)
+       if test -n "$STRIP" ; then
+         striplib="$STRIP -x"
+         AC_MSG_RESULT([yes])
+       else
+  AC_MSG_RESULT([no])
+fi
+       ;;
+   *)
+  AC_MSG_RESULT([no])
+    ;;
+  esac
+fi
+])# AC_LIBTOOL_SYS_LIB_STRIP
+
+
+# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
+[AC_MSG_CHECKING([dynamic linker characteristics])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[[01]] | aix4.[[01]].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[[45]]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+  if test "$GCC" = yes; then
+    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+  else
+    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+  fi
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[[123]]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  freebsd*) # from 4.6 on
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+interix3*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
+knetbsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[[89]] | openbsd2.[[89]].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+
+
+# _LT_AC_TAGCONFIG
+# ----------------
+AC_DEFUN([_LT_AC_TAGCONFIG],
+[AC_ARG_WITH([tags],
+    [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
+        [include additional configurations @<:@automatic@:>@])],
+    [tagnames="$withval"])
+
+if test -f "$ltmain" && test -n "$tagnames"; then
+  if test ! -f "${ofile}"; then
+    AC_MSG_WARN([output file `$ofile' does not exist])
+  fi
+
+  if test -z "$LTCC"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
+    if test -z "$LTCC"; then
+      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
+    else
+      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
+    fi
+  fi
+  if test -z "$LTCFLAGS"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
+  fi
+
+  # Extract list of available tagged configurations in $ofile.
+  # Note that this assumes the entire list is on one line.
+  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+
+  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+  for tagname in $tagnames; do
+    IFS="$lt_save_ifs"
+    # Check whether tagname contains only valid characters
+    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
+    "") ;;
+    *)  AC_MSG_ERROR([invalid tag name: $tagname])
+	;;
+    esac
+
+    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
+    then
+      AC_MSG_ERROR([tag name \"$tagname\" already exists])
+    fi
+
+    # Update the list of available tags.
+    if test -n "$tagname"; then
+      echo appending configuration tag \"$tagname\" to $ofile
+
+      case $tagname in
+      CXX)
+	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+	    (test "X$CXX" != "Xg++"))) ; then
+	  AC_LIBTOOL_LANG_CXX_CONFIG
+	else
+	  tagname=""
+	fi
+	;;
+
+      F77)
+	if test -n "$F77" && test "X$F77" != "Xno"; then
+	  AC_LIBTOOL_LANG_F77_CONFIG
+	else
+	  tagname=""
+	fi
+	;;
+
+      GCJ)
+	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
+	  AC_LIBTOOL_LANG_GCJ_CONFIG
+	else
+	  tagname=""
+	fi
+	;;
+
+      RC)
+	AC_LIBTOOL_LANG_RC_CONFIG
+	;;
+
+      *)
+	AC_MSG_ERROR([Unsupported tag name: $tagname])
+	;;
+      esac
+
+      # Append the new tag name to the list of available tags.
+      if test -n "$tagname" ; then
+      available_tags="$available_tags $tagname"
+    fi
+    fi
+  done
+  IFS="$lt_save_ifs"
+
+  # Now substitute the updated list of available tags.
+  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
+    mv "${ofile}T" "$ofile"
+    chmod +x "$ofile"
+  else
+    rm -f "${ofile}T"
+    AC_MSG_ERROR([unable to update list of available tagged configurations.])
+  fi
+fi
+])# _LT_AC_TAGCONFIG
+
+
+# AC_LIBTOOL_DLOPEN
+# -----------------
+# enable checks for dlopen support
+AC_DEFUN([AC_LIBTOOL_DLOPEN],
+ [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
+])# AC_LIBTOOL_DLOPEN
+
+
+# AC_LIBTOOL_WIN32_DLL
+# --------------------
+# declare package support for building win32 DLLs
+AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
+])# AC_LIBTOOL_WIN32_DLL
+
+
+# AC_ENABLE_SHARED([DEFAULT])
+# ---------------------------
+# implement the --enable-shared flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_SHARED],
+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([shared],
+    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+	[build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
+])# AC_ENABLE_SHARED
+
+
+# AC_DISABLE_SHARED
+# -----------------
+# set the default shared flag to --disable-shared
+AC_DEFUN([AC_DISABLE_SHARED],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)
+])# AC_DISABLE_SHARED
+
+
+# AC_ENABLE_STATIC([DEFAULT])
+# ---------------------------
+# implement the --enable-static flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_STATIC],
+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([static],
+    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+	[build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
+])# AC_ENABLE_STATIC
+
+
+# AC_DISABLE_STATIC
+# -----------------
+# set the default static flag to --disable-static
+AC_DEFUN([AC_DISABLE_STATIC],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)
+])# AC_DISABLE_STATIC
+
+
+# AC_ENABLE_FAST_INSTALL([DEFAULT])
+# ---------------------------------
+# implement the --enable-fast-install flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([fast-install],
+    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
+])# AC_ENABLE_FAST_INSTALL
+
+
+# AC_DISABLE_FAST_INSTALL
+# -----------------------
+# set the default to --disable-fast-install
+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)
+])# AC_DISABLE_FAST_INSTALL
+
+
+# AC_LIBTOOL_PICMODE([MODE])
+# --------------------------
+# implement the --with-pic flag
+# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+AC_DEFUN([AC_LIBTOOL_PICMODE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+pic_mode=ifelse($#,1,$1,default)
+])# AC_LIBTOOL_PICMODE
+
+
+# AC_PROG_EGREP
+# -------------
+# This is predefined starting with Autoconf 2.54, so this conditional
+# definition can be removed once we require Autoconf 2.54 or later.
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
+[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
+   [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+    then ac_cv_prog_egrep='grep -E'
+    else ac_cv_prog_egrep='egrep'
+    fi])
+ EGREP=$ac_cv_prog_egrep
+ AC_SUBST([EGREP])
+])])
+
+
+# AC_PATH_TOOL_PREFIX
+# -------------------
+# find a file program which can recognise shared library
+AC_DEFUN([AC_PATH_TOOL_PREFIX],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] |  ?:[\\/]*])
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+  ac_dummy="ifelse([$2], , $PATH, [$2])"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$1; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool at gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  AC_MSG_RESULT($MAGIC_CMD)
+else
+  AC_MSG_RESULT(no)
+fi
+])# AC_PATH_TOOL_PREFIX
+
+
+# AC_PATH_MAGIC
+# -------------
+# find a file program which can recognise a shared library
+AC_DEFUN([AC_PATH_MAGIC],
+[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+  else
+    MAGIC_CMD=:
+  fi
+fi
+])# AC_PATH_MAGIC
+
+
+# AC_PROG_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([AC_PROG_LD],
+[AC_ARG_WITH([gnu-ld],
+    [AC_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])
+AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by $CC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]]* | ?:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])# AC_PROG_LD
+
+
+# AC_PROG_LD_GNU
+# --------------
+AC_DEFUN([AC_PROG_LD_GNU],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# AC_PROG_LD_GNU
+
+
+# AC_PROG_LD_RELOAD_FLAG
+# ----------------------
+# find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+  lt_cv_ld_reload_flag,
+  [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+])# AC_PROG_LD_RELOAD_FLAG
+
+
+# AC_DEPLIBS_CHECK_METHOD
+# -----------------------
+# how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+[AC_CACHE_CHECK([how to recognise dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix4* | aix5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[[45]]*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump'.
+  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | kfreebsd*-gnu | dragonfly*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix3*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+nto-qnx*)
+  lt_cv_deplibs_check_method=unknown
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+])# AC_DEPLIBS_CHECK_METHOD
+
+
+# AC_PROG_NM
+# ----------
+# find the pathname to a BSD-compatible name lister
+AC_DEFUN([AC_PROG_NM],
+[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then 
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi])
+NM="$lt_cv_path_NM"
+])# AC_PROG_NM
+
+
+# AC_CHECK_LIBM
+# -------------
+# check for math library
+AC_DEFUN([AC_CHECK_LIBM],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, cos, LIBM="-lm")
+  ;;
+esac
+])# AC_CHECK_LIBM
+
+
+# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl convenience library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-convenience to the configure arguments.  Note that
+# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
+# it is assumed to be `libltdl'.  LIBLTDL will be prefixed with
+# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
+# (note the single quotes!).  If your package is not flat and you're not
+# using automake, define top_builddir and top_srcdir appropriately in
+# the Makefiles.
+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  case $enable_ltdl_convenience in
+  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+  "") enable_ltdl_convenience=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+  esac
+  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  # For backwards non-gettext consistent compatibility...
+  INCLTDL="$LTDLINCL"
+])# AC_LIBLTDL_CONVENIENCE
+
+
+# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl installable library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-install to the configure arguments.  Note that
+# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
+# and an installed libltdl is not found, it is assumed to be `libltdl'.
+# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
+# '${top_srcdir}/' (note the single quotes!).  If your package is not
+# flat and you're not using automake, define top_builddir and top_srcdir
+# appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, lt_dlinit,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
+  ])
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
+    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    LTDLINCL=
+  fi
+  # For backwards non-gettext consistent compatibility...
+  INCLTDL="$LTDLINCL"
+])# AC_LIBLTDL_INSTALLABLE
+
+
+# AC_LIBTOOL_CXX
+# --------------
+# enable support for C++ libraries
+AC_DEFUN([AC_LIBTOOL_CXX],
+[AC_REQUIRE([_LT_AC_LANG_CXX])
+])# AC_LIBTOOL_CXX
+
+
+# _LT_AC_LANG_CXX
+# ---------------
+AC_DEFUN([_LT_AC_LANG_CXX],
+[AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
+])# _LT_AC_LANG_CXX
+
+# _LT_AC_PROG_CXXCPP
+# ------------------
+AC_DEFUN([_LT_AC_PROG_CXXCPP],
+[
+AC_REQUIRE([AC_PROG_CXX])
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+fi
+])# _LT_AC_PROG_CXXCPP
+
+# AC_LIBTOOL_F77
+# --------------
+# enable support for Fortran 77 libraries
+AC_DEFUN([AC_LIBTOOL_F77],
+[AC_REQUIRE([_LT_AC_LANG_F77])
+])# AC_LIBTOOL_F77
+
+
+# _LT_AC_LANG_F77
+# ---------------
+AC_DEFUN([_LT_AC_LANG_F77],
+[AC_REQUIRE([AC_PROG_F77])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
+])# _LT_AC_LANG_F77
+
+
+# AC_LIBTOOL_GCJ
+# --------------
+# enable support for GCJ libraries
+AC_DEFUN([AC_LIBTOOL_GCJ],
+[AC_REQUIRE([_LT_AC_LANG_GCJ])
+])# AC_LIBTOOL_GCJ
+
+
+# _LT_AC_LANG_GCJ
+# ---------------
+AC_DEFUN([_LT_AC_LANG_GCJ],
+[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
+    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
+      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
+	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
+	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
+])# _LT_AC_LANG_GCJ
+
+
+# AC_LIBTOOL_RC
+# -------------
+# enable support for Windows resource files
+AC_DEFUN([AC_LIBTOOL_RC],
+[AC_REQUIRE([LT_AC_PROG_RC])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
+])# AC_LIBTOOL_RC
+
+
+# AC_LIBTOOL_LANG_C_CONFIG
+# ------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
+AC_DEFUN([_LT_AC_LANG_C_CONFIG],
+[lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}\n'
+
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF
+
+# Report which library types will actually be built
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix4* | aix5*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+    ;;
+esac
+AC_MSG_RESULT([$enable_shared])
+
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_C_CONFIG
+
+
+# AC_LIBTOOL_LANG_CXX_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
+AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
+[AC_LANG_PUSH(C++)
+AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
+
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_AC_TAGVAR(no_undefined_flag, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Dependencies to place before and after the object being linked:
+_LT_AC_TAGVAR(predep_objects, $1)=
+_LT_AC_TAGVAR(postdep_objects, $1)=
+_LT_AC_TAGVAR(predeps, $1)=
+_LT_AC_TAGVAR(postdeps, $1)=
+_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_LD=$LD
+lt_save_GCC=$GCC
+GCC=$GXX
+lt_save_with_gnu_ld=$with_gnu_ld
+lt_save_path_LD=$lt_cv_path_LD
+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+else
+  $as_unset lt_cv_prog_gnu_ld
+fi
+if test -n "${lt_cv_path_LDCXX+set}"; then
+  lt_cv_path_LD=$lt_cv_path_LDCXX
+else
+  $as_unset lt_cv_path_LD
+fi
+test -z "${LDCXX+set}" || LD=$LDCXX
+CC=${CXX-"c++"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+
+# We don't want -fno-exception wen compiling C++ code, so set the
+# no_builtin_flag separately
+if test "$GXX" = yes; then
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+else
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+fi
+
+if test "$GXX" = yes; then
+  # Set up default GNU C++ configuration
+
+  AC_PROG_LD
+
+  # Check if GNU C++ uses GNU ld as the underlying linker, since the
+  # archiving commands below assume that GNU ld is being used.
+  if test "$with_gnu_ld" = yes; then
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+    #     investigate it a little bit more. (MM)
+    wlarc='${wl}'
+
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
+	grep 'no-whole-archive' > /dev/null; then
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    with_gnu_ld=no
+    wlarc=
+
+    # A generic and very simple default shared library creation
+    # command for GNU C++ for the case where it uses the native
+    # linker, instead of GNU ld.  If possible, this setting should
+    # overridden to take advantage of the native linker features on
+    # the platform it is being used on.
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+  fi
+
+  # Commands to make compiler produce verbose output that lists
+  # what "hidden" libraries, object files and flags are used when
+  # linking a shared library.
+  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+else
+  GXX=no
+  with_gnu_ld=no
+  wlarc=
+fi
+
+# PORTME: fill in a description of your system's C++ link characteristics
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+case $host_os in
+  aix3*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  aix4* | aix5*)
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      aix_use_runtimelinking=no
+
+      # Test if we are trying to use run time linking or normal
+      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+      # need to do runtime linking.
+      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+	for ld_flag in $LDFLAGS; do
+	  case $ld_flag in
+	  *-brtl*)
+	    aix_use_runtimelinking=yes
+	    break
+	    ;;
+	  esac
+	done
+	;;
+      esac
+
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+    _LT_AC_TAGVAR(archive_cmds, $1)=''
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+    if test "$GXX" = yes; then
+      case $host_os in aix4.[[012]]|aix4.[[012]].*)
+      # We only want to do this on AIX 4.2 and lower, the check
+      # below for broken collect2 doesn't work under 4.3+
+	collect2name=`${CC} -print-prog-name=collect2`
+	if test -f "$collect2name" && \
+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	then
+	  # We have reworked collect2
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	else
+	  # We have old collect2
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+	fi
+	;;
+      esac
+      shared_flag='-shared'
+      if test "$aix_use_runtimelinking" = yes; then
+	shared_flag="$shared_flag "'${wl}-G'
+      fi
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	shared_flag='-G'
+      else
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag='${wl}-G'
+	else
+	  shared_flag='${wl}-bM:SRE'
+	fi
+      fi
+    fi
+
+    # It seems that -bexpall does not export symbols beginning with
+    # underscore (_), so it is better to generate a list of symbols to export.
+    _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+    if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other runtime loading flags (-brtl),
+      # -berok will link without error, but may produce a broken library.
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+      # Determine the default libpath from the value encoded in an empty executable.
+      _LT_AC_SYS_LIBPATH_AIX
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+     else
+      if test "$host_cpu" = ia64; then
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+      else
+	# Determine the default libpath from the value encoded in an empty executable.
+	_LT_AC_SYS_LIBPATH_AIX
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	# Warning - without using the other run time loading flags,
+	# -berok will link without error, but may produce a broken library.
+	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	# Exported symbols can be pulled into shared objects from archives
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+	# This is similar to how AIX traditionally builds its shared libraries.
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+      fi
+    fi
+    ;;
+
+  beos*)
+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+    ;;
+
+  chorus*)
+    case $cc_basename in
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+    # as there is no search path for DLLs.
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+    _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+    _LT_AC_TAGVAR(always_export_symbols, $1)=no
+    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      # If the export-symbols file already is a .def file (1st line
+      # is EXPORTS), use it as is; otherwise, prepend...
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	cp $export_symbols $output_objdir/$soname.def;
+      else
+	echo EXPORTS > $output_objdir/$soname.def;
+	cat $export_symbols >> $output_objdir/$soname.def;
+      fi~
+      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+  ;;
+      darwin* | rhapsody*)
+        case $host_os in
+        rhapsody* | darwin1.[[012]])
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[[012]])
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+        esac
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+    if test "$GXX" = yes ; then
+      lt_int_apple_cc_single_mod=no
+      output_verbose_link_cmd='echo'
+      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
+       lt_int_apple_cc_single_mod=yes
+      fi
+      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      else
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+        fi
+        _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          else
+            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          fi
+            _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+          ;;
+      esac
+      fi
+        ;;
+
+  dgux*)
+    case $cc_basename in
+      ec++*)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      ghcx*)
+	# Green Hills C++ Compiler
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+  freebsd[[12]]*)
+    # C++ shared libraries reported to be fairly broken before switch to ELF
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  freebsd-elf*)
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    ;;
+  freebsd* | kfreebsd*-gnu | dragonfly*)
+    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+    # conventions
+    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+    ;;
+  gnu*)
+    ;;
+  hpux9*)
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				# but as the default
+				# location of the library.
+
+    case $cc_basename in
+    CC*)
+      # FIXME: insert proper C++ library support
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    aCC*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      #
+      # There doesn't appear to be a way to prevent this compiler from
+      # explicitly linking system object files so we need to strip them
+      # from the output so that they don't get included in the library
+      # dependencies.
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      ;;
+    *)
+      if test "$GXX" = yes; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+    ;;
+  hpux10*|hpux11*)
+    if test $with_gnu_ld = no; then
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+      case $host_cpu in
+      hppa*64*|ia64*)
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+        ;;
+      *)
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        ;;
+      esac
+    fi
+    case $host_cpu in
+    hppa*64*|ia64*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+    *)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					      # but as the default
+					      # location of the library.
+      ;;
+    esac
+
+    case $cc_basename in
+      CC*)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      aCC*)
+	case $host_cpu in
+	hppa*64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	esac
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes; then
+	  if test $with_gnu_ld = no; then
+	    case $host_cpu in
+	    hppa*64*)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    ia64*)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    *)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    esac
+	  fi
+	else
+	  # FIXME: insert proper C++ library support
+	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+    esac
+    ;;
+  interix3*)
+    _LT_AC_TAGVAR(hardcode_direct, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+    # Instead, shared libraries are loaded at an image base (0x10000000 by
+    # default) and relocated if they conflict, which is a slow very memory
+    # consuming and fragmenting process.  To avoid this, we pick a random,
+    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    ;;
+  irix5* | irix6*)
+    case $cc_basename in
+      CC*)
+	# SGI C++
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	# Archives containing C++ object files must be created using
+	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	;;
+      *)
+	if test "$GXX" = yes; then
+	  if test "$with_gnu_ld" = no; then
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	  else
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+	  fi
+	fi
+	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+	;;
+    esac
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+    ;;
+  linux*)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	;;
+      icpc*)
+	# Intel C++
+	with_gnu_ld=yes
+	# version 8.0 and above of icpc choke on multiply defined symbols
+	# if we add $predep_objects and $postdep_objects, however 7.1 and
+	# earlier do not add the objects themselves.
+	case `$CC -V 2>&1` in
+	*"Version 7."*)
+  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	*)  # Version 8.0 or newer
+	  tmp_idyn=
+	  case $host_cpu in
+	    ia64*) tmp_idyn=' -i_dynamic';;
+	  esac
+  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	esac
+	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	;;
+      pgCC*)
+        # Portland Group C++ compiler
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        ;;
+      cxx*)
+	# Compaq C++
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	runpath_var=LD_RUN_PATH
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+    esac
+    ;;
+  lynxos*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  m88k*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  mvs*)
+    case $cc_basename in
+      cxx*)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+  netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+      wlarc=
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    fi
+    # Workaround some broken pre-1.5 toolchains
+    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+    ;;
+  openbsd2*)
+    # C++ shared libraries are fairly broken
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  openbsd*)
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    fi
+    output_verbose_link_cmd='echo'
+    ;;
+  osf3*)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+
+	;;
+      RCC*)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      cxx*)
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+	else
+	  # FIXME: insert proper C++ library support
+	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+    esac
+    ;;
+  osf4* | osf5*)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Archives containing C++ object files must be created using
+	# the KAI C++ compiler.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
+	;;
+      RCC*)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      cxx*)
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	  echo "-hidden">> $lib.exp~
+	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
+	  $rm $lib.exp'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+	else
+	  # FIXME: insert proper C++ library support
+	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+    esac
+    ;;
+  psos*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  sunos4*)
+    case $cc_basename in
+      CC*)
+	# Sun C++ 4.x
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      lcc*)
+	# Lucid
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+  solaris*)
+    case $cc_basename in
+      CC*)
+	# Sun C++ 4.2, 5.x and Centerline C++
+        _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
+	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	case $host_os in
+	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	  *)
+	    # The C++ compiler is used as linker so we must use $wl
+	    # flag to pass the commands to the underlying system
+	    # linker. We must also pass each convience library through
+	    # to the system linker between allextract/defaultextract.
+	    # The C++ compiler will combine linker options so we
+	    # cannot just pass the convience library names through
+	    # without $wl.
+	    # Supported since Solaris 2.6 (maybe 2.5.1?)
+	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
+	    ;;
+	esac
+	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+	output_verbose_link_cmd='echo'
+
+	# Archives containing C++ object files must be created using
+	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	;;
+      gcx*)
+	# Green Hills C++ Compiler
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	# The C++ compiler must be used to create the archive.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	;;
+      *)
+	# GNU C++ compiler with Solaris linker
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	  if $CC --version | grep -v '^2\.7' > /dev/null; then
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  else
+	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	    # platform.
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  fi
+
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	fi
+	;;
+    esac
+    ;;
+  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
+    ;;
+  sysv5* | sco3.2v5* | sco5v6*)
+    # Note: We can NOT use -z defs as we might desire, because we do not
+    # link with -lc, and that would cause any symbols used from libc to
+    # always be unresolved, which means just about no library would
+    # ever link correctly.  If we're not using GNU ld we use -z text
+    # though, which does catch some bad symbols but isn't as heavy-handed
+    # as -z defs.
+    # For security reasons, it is highly recommended that you always
+    # use absolute paths for naming shared libraries, and exclude the
+    # DT_RUNPATH tag from executables and libraries.  But doing so
+    # requires that you compile everything twice, which is a pain.
+    # So that behaviour is only enabled if SCOABSPATH is set to a
+    # non-empty value in the environment.  Most likely only useful for
+    # creating official distributions of packages.
+    # This is a hack until libtool officially supports absolute path
+    # names for shared libraries.
+    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+    _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
+    ;;
+  tandem*)
+    case $cc_basename in
+      NCC*)
+	# NonStop-UX NCC 3.20
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+  vxworks*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  *)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+esac
+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_AC_TAGVAR(GCC, $1)="$GXX"
+_LT_AC_TAGVAR(LD, $1)="$LD"
+
+AC_LIBTOOL_POSTDEP_PREDEP($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC=$lt_save_CC
+LDCXX=$LD
+LD=$lt_save_LD
+GCC=$lt_save_GCC
+with_gnu_ldcxx=$with_gnu_ld
+with_gnu_ld=$lt_save_with_gnu_ld
+lt_cv_path_LDCXX=$lt_cv_path_LD
+lt_cv_path_LD=$lt_save_path_LD
+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+])# AC_LIBTOOL_LANG_CXX_CONFIG
+
+# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
+# ------------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
+int a;
+void foo (void) { a = 0; }
+EOF
+],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+EOF
+],[$1],[F77],[cat > conftest.$ac_ext <<EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+EOF
+],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+EOF
+])
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  # The `*' in the case matches for architectures that use `case' in
+  # $output_verbose_cmd can trigger glob expansion during the loop
+  # eval without this substitution.
+  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
+
+  for p in `eval $output_verbose_link_cmd`; do
+    case $p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" \
+	  || test $p = "-R"; then
+	 prev=$p
+	 continue
+       else
+	 prev=
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	   else
+	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
+	   _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
+	 else
+	   _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
+	 fi
+       fi
+       ;;
+
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
+	   _LT_AC_TAGVAR(predep_objects, $1)="$p"
+	 else
+	   _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
+	 fi
+       else
+	 if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
+	   _LT_AC_TAGVAR(postdep_objects, $1)="$p"
+	 else
+	   _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$rm -f confest.$objext
+
+# PORTME: override above test on systems where it is broken
+ifelse([$1],[CXX],
+[case $host_os in
+interix3*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_AC_TAGVAR(predep_objects,$1)=
+  _LT_AC_TAGVAR(postdep_objects,$1)=
+  _LT_AC_TAGVAR(postdeps,$1)=
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
+    ;;
+  esac
+  ;;
+esac
+])
+
+case " $_LT_AC_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+])# AC_LIBTOOL_POSTDEP_PREDEP
+
+# AC_LIBTOOL_LANG_F77_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
+AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
+[AC_REQUIRE([AC_PROG_F77])
+AC_LANG_PUSH(Fortran 77)
+
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_AC_TAGVAR(no_undefined_flag, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="      program t\n      end\n"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${F77-"f77"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+aix4* | aix5*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+  ;;
+esac
+AC_MSG_RESULT([$enable_shared])
+
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+
+_LT_AC_TAGVAR(GCC, $1)="$G77"
+_LT_AC_TAGVAR(LD, $1)="$LD"
+
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_F77_CONFIG
+
+
+# AC_LIBTOOL_LANG_GCJ_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
+AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
+[AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+
+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_GCJ_CONFIG
+
+
+# AC_LIBTOOL_LANG_RC_CONFIG
+# -------------------------
+# Ensure that the configuration vars for the Windows resource compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
+AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
+[AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${RC-"windres"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_RC_CONFIG
+
+
+# AC_LIBTOOL_CONFIG([TAGNAME])
+# ----------------------------
+# If TAGNAME is not passed, then create an initial libtool script
+# with a default configuration from the untagged config vars.  Otherwise
+# add code to config.status for appending the configuration named by
+# TAGNAME from the matching tagged config vars.
+AC_DEFUN([AC_LIBTOOL_CONFIG],
+[# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    _LT_AC_TAGVAR(compiler, $1) \
+    _LT_AC_TAGVAR(CC, $1) \
+    _LT_AC_TAGVAR(LD, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
+    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
+    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
+    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
+    _LT_AC_TAGVAR(old_archive_cmds, $1) \
+    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
+    _LT_AC_TAGVAR(predep_objects, $1) \
+    _LT_AC_TAGVAR(postdep_objects, $1) \
+    _LT_AC_TAGVAR(predeps, $1) \
+    _LT_AC_TAGVAR(postdeps, $1) \
+    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
+    _LT_AC_TAGVAR(archive_cmds, $1) \
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
+    _LT_AC_TAGVAR(postinstall_cmds, $1) \
+    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
+    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
+    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
+    _LT_AC_TAGVAR(no_undefined_flag, $1) \
+    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
+    _LT_AC_TAGVAR(hardcode_automatic, $1) \
+    _LT_AC_TAGVAR(module_cmds, $1) \
+    _LT_AC_TAGVAR(module_expsym_cmds, $1) \
+    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
+    _LT_AC_TAGVAR(exclude_expsyms, $1) \
+    _LT_AC_TAGVAR(include_expsyms, $1); do
+
+    case $var in
+    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
+    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
+    _LT_AC_TAGVAR(archive_cmds, $1) | \
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
+    _LT_AC_TAGVAR(module_cmds, $1) | \
+    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
+    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
+    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\[$]0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
+    ;;
+  esac
+
+ifelse([$1], [],
+  [cfgfile="${ofile}T"
+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+  $rm -f "$cfgfile"
+  AC_MSG_NOTICE([creating $ofile])],
+  [cfgfile="$ofile"])
+
+  cat <<__EOF__ >> "$cfgfile"
+ifelse([$1], [],
+[#! $SHELL
+
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+#
+# This file is part of GNU Libtool:
+# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="$SED -e 1s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# The names of the tagged configurations supported by this script.
+available_tags=
+
+# ### BEGIN LIBTOOL CONFIG],
+[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
+
+# Is the compiler the GNU C compiler?
+with_gcc=$_LT_AC_TAGVAR(GCC, $1)
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
+archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
+module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
+
+# Symbols that must always be exported.
+include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
+
+ifelse([$1],[],
+[# ### END LIBTOOL CONFIG],
+[# ### END LIBTOOL TAG CONFIG: $tagname])
+
+__EOF__
+
+ifelse([$1],[], [
+  case $host_os in
+  aix3*)
+    cat <<\EOF >> "$cfgfile"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+    ;;
+  esac
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" || \
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+])
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+])# AC_LIBTOOL_CONFIG
+
+
+# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------------------
+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+
+_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test "$GCC" = yes; then
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+
+  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+    lt_cv_prog_compiler_rtti_exceptions,
+    [-fno-rtti -fno-exceptions], [],
+    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
+
+
+# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+# ---------------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
+[AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([AC_PROG_NM])
+AC_REQUIRE([AC_OBJEXT])
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[[BCDT]]'
+  ;;
+cygwin* | mingw* | pw32*)
+  symcode='[[ABCDGISTW]]'
+  ;;
+hpux*) # Its linker distinguishes data from code symbols
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDEGRST]]'
+  fi
+  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  ;;
+linux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDGIRSTW]]'
+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[[BCDEGRST]]'
+  ;;
+osf*)
+  symcode='[[BCDEGQRST]]'
+  ;;
+solaris*)
+  symcode='[[BDRT]]'
+  ;;
+sco3.2v5*)
+  symcode='[[DT]]'
+  ;;
+sysv4.2uw2*)
+  symcode='[[DT]]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[[ABDT]]'
+  ;;
+sysv4)
+  symcode='[[DFNSTU]]'
+  ;;
+esac
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if grep ' nm_test_var$' "$nlist" >/dev/null; then
+	if grep ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+
+	  cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[[]] =
+{
+EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
+	  cat <<\EOF >> conftest.$ac_ext
+  {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+    fi
+  else
+    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+    cat conftest.$ac_ext >&5
+  fi
+  rm -f conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  AC_MSG_RESULT(failed)
+else
+  AC_MSG_RESULT(ok)
+fi
+]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+
+
+# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
+# ---------------------------------------
+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
+[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
+
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+ ifelse([$1],[CXX],[
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      ;;
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | os2* | pw32*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+      ;;
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	;;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix4* | aix5*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	else
+	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+       darwin*)
+         # PIC is the default on this platform
+         # Common symbols not allowed in MH_DYLIB files
+         case $cc_basename in
+           xlc*)
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+           ;;
+         esac
+       ;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | kfreebsd*-gnu | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux*)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    ;;
+	  icpc* | ecpc*)
+	    # Intel C++
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  pgCC*)
+	    # Portland Group C++ compiler.
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+	;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+	;;
+    esac
+  fi
+],
+[
+  if test "$GCC" = yes; then
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      ;;
+
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      else
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC (with -KPIC) is the default.
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    newsos6)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    linux*)
+      case $cc_basename in
+      icc* | ecc*)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      ccc*)
+        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        # All Alpha code is PIC.
+        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        ;;
+      esac
+      ;;
+
+    osf3* | osf4* | osf5*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # All OSF/1 code is PIC.
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    solaris*)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    unicos*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+
+    uts4*)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+    esac
+  fi
+])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
+    _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
+    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+    ;;
+  *)
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
+    ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
+AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
+  $lt_tmp_static_flag,
+  [],
+  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
+])
+
+
+# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
+# ------------------------------------
+# See if the linker supports building shared libraries.
+AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
+[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ifelse([$1],[CXX],[
+  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  case $host_os in
+  aix4* | aix5*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+    else
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+  ;;
+  cygwin* | mingw*)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  kfreebsd*-gnu)
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=no
+  ;;
+  linux*)
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=no
+  ;;
+  *)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  esac
+],[
+  runpath_var=
+  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+  _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_AC_TAGVAR(archive_cmds, $1)=
+  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
+  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_AC_TAGVAR(hardcode_automatic, $1)=no
+  _LT_AC_TAGVAR(module_cmds, $1)=
+  _LT_AC_TAGVAR(module_expsym_cmds, $1)=
+  _LT_AC_TAGVAR(always_export_symbols, $1)=no
+  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  _LT_AC_TAGVAR(include_expsyms, $1)=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  _LT_CC_BASENAME([$compiler])
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix3* | aix4* | aix5*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+
+      # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+      # as there is no search path for DLLs.
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(always_export_symbols, $1)=no
+      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    interix3*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    linux*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+	_LT_AC_TAGVAR(link_all_deplibs, $1)=no
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) 
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+
+    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
+      runpath_var=
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+      fi
+      ;;
+
+    aix4* | aix5*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+	else
+	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+	  for ld_flag in $LDFLAGS; do
+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+  	    aix_use_runtimelinking=yes
+  	    break
+  	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      _LT_AC_TAGVAR(archive_cmds, $1)=''
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[[012]]|aix4.[[012]].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+  	  # We have reworked collect2
+  	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	  else
+  	  # We have old collect2
+  	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+  	  # It fails to find uninstalled libraries when the uninstalled
+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
+  	  # to unsupported forces relinking
+  	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+  	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+  	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+  	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       _LT_AC_SYS_LIBPATH_AIX
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+	if test "$host_cpu" = ia64; then
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 _LT_AC_SYS_LIBPATH_AIX
+	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      # see comment about different semantics on the GNU ld section
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    bsdi[[45]]*)
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
+      # FIXME: Should let the user specify the lib program.
+      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
+      _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      ;;
+
+    darwin* | rhapsody*)
+      case $host_os in
+        rhapsody* | darwin1.[[012]])
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[[012]])
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+      esac
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+          ;;
+      esac
+    fi
+      ;;
+
+    dgux*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    freebsd1*)
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+      
+    # GNU/kFreeBSD uses gcc -shared to do shared libraries.
+    kfreebsd*-gnu)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    newsos6)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    openbsd*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      else
+       case $host_os in
+	 openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	   _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	   ;;
+	 *)
+	   _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	   ;;
+       esac
+      fi
+      ;;
+
+    os2*)
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      else
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    solaris*)
+      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+	wlarc=''
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      case $host_os in
+      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      *)
+ 	# The compiler driver will combine linker options so we
+ 	# cannot just pass the convience library names through
+ 	# without $wl, iff we do not link with $LD.
+ 	# Luckily, gcc supports the same syntax we need for Sun Studio.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+ 	case $wlarc in
+ 	'')
+ 	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
+ 	*)
+ 	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ 	esac ;;
+      esac
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+        ;;
+	motorola)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4.3*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*)
+      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    esac
+  fi
+])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+  # Assume -lc should be added
+  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $_LT_AC_TAGVAR(archive_cmds, $1) in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+      $rm conftest*
+      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+	pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+        if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
+        then
+	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+        else
+	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+        fi
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
+      ;;
+    esac
+  fi
+  ;;
+esac
+])# AC_LIBTOOL_PROG_LD_SHLIBS
+
+
+# _LT_AC_FILE_LTDLL_C
+# -------------------
+# Be careful that the start marker always follows a newline.
+AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# #  ifdef __CYGWIN32__
+# #    define __CYGWIN__ __CYGWIN32__
+# #  endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+#   __hDllInstance_base = hInst;
+#   return TRUE;
+# }
+# /* ltdll.c ends here */
+])# _LT_AC_FILE_LTDLL_C
+
+
+# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
+# ---------------------------------
+AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
+
+
+# old names
+AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
+AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
+AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
+AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
+AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
+
+# This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])
+
+AC_DEFUN([LT_AC_PROG_GCJ],
+[AC_CHECK_TOOL(GCJ, gcj, no)
+  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+  AC_SUBST(GCJFLAGS)
+])
+
+AC_DEFUN([LT_AC_PROG_RC],
+[AC_CHECK_TOOL(RC, windres, no)
+])
+
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+# LT_AC_PROG_SED
+# --------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+AC_DEFUN([LT_AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f $lt_ac_sed && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test $lt_ac_count -gt 10 && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test $lt_ac_count -gt $lt_ac_max; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
+])
+SED=$lt_cv_path_SED
+AC_MSG_RESULT([$SED])
+])
+
+#                                                        -*- Autoconf -*-
+# Copyright (C) 2002, 2003  Free Software Foundation, Inc.
+# Generated from amversion.in; do not edit by hand.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+	 [AM_AUTOMAKE_VERSION([1.8.5])])
+
+# AM_AUX_DIR_EXPAND
+
+# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                              -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 6
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.])
+fi])])
+
+# serial 7						-*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
+# Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])
+])
+
+# Generate code to set up dependency tracking.   -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+#serial 2
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+  # Strip MF so we end up with the name of the file.
+  mf=`echo "$mf" | sed -e 's/:.*$//'`
+  # Check whether this is an Automake generated Makefile or not.
+  # We used to match only the files named `Makefile.in', but
+  # some people rename them; so instead we look at the file content.
+  # Grep'ing the first line is not enough: some people post-process
+  # each Makefile.in and add a new line on top of each file to say so.
+  # So let's grep whole file.
+  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+    dirpart=`AS_DIRNAME("$mf")`
+  else
+    continue
+  fi
+  grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
+  # Extract the definition of DEP_FILES from the Makefile without
+  # running `make'.
+  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+  test -z "$DEPDIR" && continue
+  # When using ansi2knr, U may be empty or an underscore; expand it
+  U=`sed -n 's/^U = //p' < "$mf"`
+  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
+  # We invoke sed twice because it is the simplest approach to
+  # changing $(DEPDIR) to its actual value in the expansion.
+  for file in `sed -n '
+    /^DEP_FILES = .*\\\\$/ {
+      s/^DEP_FILES = //
+      :loop
+	s/\\\\$//
+	p
+	n
+	/\\\\$/ b loop
+      p
+    }
+    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+    # Make sure the directory exists.
+    test -f "$dirpart/$file" && continue
+    fdir=`AS_DIRNAME(["$file"])`
+    AS_MKDIR_P([$dirpart/$fdir])
+    # echo "creating $dirpart/$file"
+    echo '# dummy' > "$dirpart/$file"
+  done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 7
+
+# AM_CONFIG_HEADER is obsolete.  It has been replaced by AC_CONFIG_HEADERS.
+AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
+
+# Do all the work for Automake.                            -*- Autoconf -*-
+
+# This macro actually does too much some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 11
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.58])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+   test -f $srcdir/config.status; then
+  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_MISSING_PROG(AMTAR, tar)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+                  [_AM_DEPENDENCIES(CC)],
+                  [define([AC_PROG_CC],
+                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+                  [_AM_DEPENDENCIES(CXX)],
+                  [define([AC_PROG_CXX],
+                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $1 | $1:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+
+# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+#                                                          -*- Autoconf -*-
+# Copyright (C) 2003  Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 1
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Add --enable-maintainer-mode option to configure.
+# From Jim Meyering
+
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004
+# Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 3
+
+AC_DEFUN([AM_MAINTAINER_MODE],
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+  dnl maintainer-mode is disabled by default
+  AC_ARG_ENABLE(maintainer-mode,
+[  --enable-maintainer-mode  enable make rules and dependencies not useful
+			  (and sometimes confusing) to the casual installer],
+      USE_MAINTAINER_MODE=$enableval,
+      USE_MAINTAINER_MODE=no)
+  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+  AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
+  MAINT=$MAINTAINER_MODE_TRUE
+  AC_SUBST(MAINT)dnl
+]
+)
+
+AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+# Check to see how 'make' treats includes.	-*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 2
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+   am__include=include
+   am__quote=
+   _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+      am__include=.include
+      am__quote="\""
+      _am_result=BSD
+   fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+#  -*- Autoconf -*-
+
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 3
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+
+# Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
+# created by `make install' are always world readable, even if the
+# installer happens to have an overly restrictive umask (e.g. 077).
+# This was a mistake.  There are at least two reasons why we must not
+# use `-m 0755':
+#   - it causes special bits like SGID to be ignored,
+#   - it may be too restrictive (some setups expect 775 directories).
+#
+# Do not use -m 0755 and let people choose whatever they expect by
+# setting umask.
+#
+# We cannot accept any implementation of `mkdir' that recognizes `-p'.
+# Some implementations (such as Solaris 8's) are not thread-safe: if a
+# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
+# concurrently, both version can detect that a/ is missing, but only
+# one can create it and the other will error out.  Consequently we
+# restrict ourselves to GNU make (using the --version option ensures
+# this.)
+AC_DEFUN([AM_PROG_MKDIR_P],
+[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+  # Keeping the `.' argument allows $(mkdir_p) to be used without
+  # argument.  Indeed, we sometimes output rules like
+  #   $(mkdir_p) $(somedir)
+  # where $(somedir) is conditionally defined.
+  # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more
+  # expensive solution, as it forces Make to start a sub-shell.)
+  mkdir_p='mkdir -p -- .'
+else
+  # On NextStep and OpenStep, the `mkdir' command does not
+  # recognize any option.  It will interpret all options as
+  # directories to create, and then abort because `.' already
+  # exists.
+  for d in ./-p ./--version;
+  do
+    test -d $d && rmdir $d
+  done
+  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+  if test -f "$ac_aux_dir/mkinstalldirs"; then
+    mkdir_p='$(mkinstalldirs)'
+  else
+    mkdir_p='$(install_sh) -d'
+  fi
+fi
+AC_SUBST([mkdir_p])])
+
+# Helper functions for option handling.                    -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003  Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 2
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 3
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# AM_PROG_INSTALL_STRIP
+
+# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+m4_include([acinclude.m4])

Added: freeswitch/trunk/libs/speex/config.guess
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/config.guess	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,1466 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+timestamp='2005-08-03'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner <per at bothner.com>.
+# Please send patches to <config-patches at gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit build system type.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches at gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi at noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE_ARCH}" in
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep __ELF__ >/dev/null
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+	        os=netbsd
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+        echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit ;;
+    arm:riscos:*:*|arm:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee at wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    i86pc:SunOS:5.*:*)
+	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+        exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+        echo m68k-milan-mint${UNAME_RELEASE}
+        exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+        echo m68k-hades-mint${UNAME_RELEASE}
+        exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+        echo m68k-unknown-mint${UNAME_RELEASE}
+        exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+ 	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[45])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+                    case "${sc_cpu_version}" in
+                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+                      532)                      # CPU_PA_RISC2_0
+                        case "${sc_kernel_bits}" in
+                          32) HP_ARCH="hppa2.0n" ;;
+                          64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+                        esac ;;
+                    esac
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^              //' << EOF >$dummy.c
+
+              #define _HPUX_SOURCE
+              #include <stdlib.h>
+              #include <unistd.h>
+
+              int main ()
+              {
+              #if defined(_SC_KERNEL_BITS)
+                  long bits = sysconf(_SC_KERNEL_BITS);
+              #endif
+                  long cpu  = sysconf (_SC_CPU_VERSION);
+
+                  switch (cpu)
+              	{
+              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+              	case CPU_PA_RISC2_0:
+              #if defined(_SC_KERNEL_BITS)
+              	    switch (bits)
+              		{
+              		case 64: puts ("hppa2.0w"); break;
+              		case 32: puts ("hppa2.0n"); break;
+              		default: puts ("hppa2.0"); break;
+              		} break;
+              #else  /* !defined(_SC_KERNEL_BITS) */
+              	    puts ("hppa2.0"); break;
+              #endif
+              	default: puts ("hppa1.0"); break;
+              	}
+                  exit (0);
+              }
+EOF
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if [ ${HP_ARCH} = "hppa2.0w" ]
+	then
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep __LP64__ >/dev/null
+	    then
+		HP_ARCH="hppa2.0w"
+	    else
+		HP_ARCH="hppa64"
+	    fi
+	fi
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit ;;
+    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+        exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+        exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+        exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+        exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+        exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit ;;
+    5000:UNIX_System_V:4.*:*)
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:FreeBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit ;;
+    i*:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit ;;
+    i*:windows32*:*)
+    	# uname -m includes "-pc" on this system.
+    	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit ;;
+    x86:Interix*:[34]*)
+	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
+	exit ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i586-pc-interix
+	exit ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	exit ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit ;;
+    arm*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    cris:Linux:*:*)
+	echo cris-axis-linux-gnu
+	exit ;;
+    crisv32:Linux:*:*)
+	echo crisv32-axis-linux-gnu
+	exit ;;
+    frv:Linux:*:*)
+    	echo frv-unknown-linux-gnu
+	exit ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    mips:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips
+	#undef mipsel
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mipsel
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips64
+	#undef mips64el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mips64el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips64
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    or32:Linux:*:*)
+	echo or32-unknown-linux-gnu
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-gnu
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+        esac
+	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-gnu ;;
+	esac
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-gnu
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux
+	exit ;;
+    sh64*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    x86_64:Linux:*:*)
+	echo x86_64-unknown-linux-gnu
+	exit ;;
+    i*86:Linux:*:*)
+	# The BFD linker knows what the default object file format is, so
+	# first see if it will tell us. cd to the root directory to prevent
+	# problems with other programs or directories called `ld' in the path.
+	# Set LC_ALL=C to ensure ld outputs messages in English.
+	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
+			 | sed -ne '/supported targets:/!d
+				    s/[ 	][ 	]*/ /g
+				    s/.*supported targets: *//
+				    s/ .*//
+				    p'`
+        case "$ld_supported_targets" in
+	  elf32-i386)
+		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+		;;
+	  a.out-i386-linux)
+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		exit ;;
+	  coff-i386)
+		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		exit ;;
+	  "")
+		# Either a pre-BFD a.out linker (linux-gnuoldld) or
+		# one that does not give us useful --help.
+		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+		exit ;;
+	esac
+	# Determine whether the default compiler is a.out or elf
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <features.h>
+	#ifdef __ELF__
+	# ifdef __GLIBC__
+	#  if __GLIBC__ >= 2
+	LIBC=gnu
+	#  else
+	LIBC=gnulibc1
+	#  endif
+	# else
+	LIBC=gnulibc1
+	# endif
+	#else
+	#ifdef __INTEL_COMPILER
+	LIBC=gnu
+	#else
+	LIBC=gnuaout
+	#endif
+	#endif
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+	test x"${LIBC}" != x && {
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+		exit
+	}
+	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
+	;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+        # Unixware is an offshoot of SVR4, but it has its own version
+        # number series starting with 2...
+        # I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+        # Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
+        # the processor, so we play safe by assuming i386.
+	echo i386-pc-msdosdjgpp
+        exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+          && { echo i486-ncr-sysv4; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                      # says <Richard.M.Bartel at ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes at openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf at swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green at stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green at stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+	        echo mips-nec-sysv${UNAME_RELEASE}
+	else
+	        echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+        exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	case $UNAME_PROCESSOR in
+	    *86) UNAME_PROCESSOR=i686 ;;
+	    unknown) UNAME_PROCESSOR=powerpc ;;
+	esac
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = "x86"; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+        echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+          "4"
+#else
+	  ""
+#endif
+         ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    c34*)
+	echo c34-convex-bsd
+	exit ;;
+    c38*)
+	echo c38-convex-bsd
+	exit ;;
+    c4*)
+	echo c4-convex-bsd
+	exit ;;
+    esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+and
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches at gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:

Added: freeswitch/trunk/libs/speex/config.h.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/config.h.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,147 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Make use of ARM4 assembly optimizations */
+#undef ARM4_ASM
+
+/* Make use of ARM5E assembly optimizations */
+#undef ARM5E_ASM
+
+/* Make use of Blackfin assembly optimizations */
+#undef BFIN_ASM
+
+/* Disable wideband codec */
+#undef DISABLE_WIDEBAND
+
+/* Enable valgrind extra checks */
+#undef ENABLE_VALGRIND
+
+/* Enable support for Epic 4.8 kbps mode */
+#undef EPIC_48K
+
+/* Debug fixed-point implementation */
+#undef FIXED_DEBUG
+
+/* Compile as fixed-point */
+#undef FIXED_POINT
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the `getopt_long' function. */
+#undef HAVE_GETOPT_LONG
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `m' library (-lm). */
+#undef HAVE_LIBM
+
+/* Define to 1 if you have the `winmm' library (-lwinmm). */
+#undef HAVE_LIBWINMM
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/audioio.h> header file. */
+#undef HAVE_SYS_AUDIOIO_H
+
+/* Define to 1 if you have the <sys/soundcard.h> header file. */
+#undef HAVE_SYS_SOUNDCARD_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Reduce precision to 16 bits (EXPERIMENTAL) */
+#undef PRECISION16
+
+/* The size of a `int', as computed by sizeof. */
+#undef SIZEOF_INT
+
+/* The size of a `long', as computed by sizeof. */
+#undef SIZEOF_LONG
+
+/* The size of a `short', as computed by sizeof. */
+#undef SIZEOF_SHORT
+
+/* Version extra */
+#undef SPEEX_EXTRA_VERSION
+
+/* Version major */
+#undef SPEEX_MAJOR_VERSION
+
+/* Version micro */
+#undef SPEEX_MICRO_VERSION
+
+/* Version minor */
+#undef SPEEX_MINOR_VERSION
+
+/* Complete version string */
+#undef SPEEX_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Enable support for TI C55X DSP */
+#undef TI_C55X
+
+/* Make use of alloca */
+#undef USE_ALLOCA
+
+/* Use C99 variable-size arrays */
+#undef VAR_ARRAYS
+
+/* Enable Vorbis-style psychoacoustics (EXPERIMENTAL) */
+#undef VORBIS_PSYCHO
+
+/* Define to 1 if your processor stores words with the most significant byte
+   first (like Motorola and SPARC, unlike Intel and VAX). */
+#undef WORDS_BIGENDIAN
+
+/* Enable SSE support */
+#undef _USE_SSE
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+   calls it, or to nothing if 'inline' is not supported under any name.  */
+#ifndef __cplusplus
+#undef inline
+#endif
+
+/* Define to equivalent of C99 restrict keyword, or to nothing if this is not
+   supported. Do not define if restrict is supported directly. */
+#undef restrict

Added: freeswitch/trunk/libs/speex/config.sub
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/config.sub	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,1579 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+timestamp='2005-07-08'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches at gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches at gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
+  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis | -knuth | -cray)
+		os=
+		basic_machine=$1
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+ 	-chorusrdb)
+ 		os=-chorusrdb
+		basic_machine=$1
+ 		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	1750a | 580 \
+	| a29k \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| bfin \
+	| c4x | clipper \
+	| d10v | d30v | dlx | dsp16xx \
+	| fr30 | frv \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| i370 | i860 | i960 | ia64 \
+	| ip2k | iq2000 \
+	| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64vr | mips64vrel \
+	| mips64orion | mips64orionel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| ms1 \
+	| msp430 \
+	| ns16k | ns32k \
+	| or32 \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+	| pyramid \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b \
+	| strongarm \
+	| tahoe | thumb | tic4x | tic80 | tron \
+	| v850 | v850e \
+	| we32k \
+	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| z8k)
+		basic_machine=$basic_machine-unknown
+		;;
+	m32c)
+		basic_machine=$basic_machine-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12)
+		# Motorola 68HC11/12.
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	580-* \
+	| a29k-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+	| clipper-* | craynv-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| ip2k-* | iq2000-* \
+	| m32r-* | m32rle-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| ms1-* \
+	| msp430-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+	| pyramid-* \
+	| romp-* | rs6000-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+	| tahoe-* | thumb-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tron-* \
+	| v850-* | v850e-* | vax-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa-* \
+	| ymp-* \
+	| z8k-*)
+		;;
+	m32c-*)
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+    	abacus)
+		basic_machine=abacus-unknown
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | j90)
+		basic_machine=j90-cray
+		os=-unicos
+		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16c)
+		basic_machine=cr16c-unknown
+		os=-elf
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
+	i*86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i*86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i*86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i*86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	mingw32)
+		basic_machine=i386-pc
+		os=-mingw32
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	openrisc | openrisc-*)
+		basic_machine=or32-unknown
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+	pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pentium | p5 | k5 | k6 | nexgen | viac3)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2 | pentiumiii | pentium3)
+		basic_machine=i686-pc
+		;;
+	pentium4)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium4-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc)	basic_machine=powerpc-unknown
+		;;
+	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+		;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
+	sparclite-wrs | simso-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=alphaev5-cray
+		os=-unicos
+		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+	tic54x | c54x*)
+		basic_machine=tic54x-unknown
+		os=-coff
+		;;
+	tic55x | c55x*)
+		basic_machine=tic55x-unknown
+		os=-coff
+		;;
+	tic6x | c6x*)
+		basic_machine=tic6x-unknown
+		os=-coff
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+		basic_machine=f301-fujitsu
+		;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv8 | sparcv9 | sparcv9b)
+		basic_machine=sparc-sun
+		;;
+	cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+        # First match some system type aliases
+        # that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* \
+	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i*86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto-qnx*)
+		;;
+	-nto*)
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+        -os400*)
+		os=-os400
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-atheos*)
+		os=-atheos
+		;;
+	-syllable*)
+		os=-syllable
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
+	-ns2 )
+		os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+        -tpf*)
+		os=-tpf
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-aros*)
+		os=-aros
+		;;
+	-kaos*)
+		os=-kaos
+		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+    c4x-* | tic4x-*)
+        os=-coff
+        ;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=-tops20
+		;;
+	pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		# This also exists in the configure program, but was not the
+		# default.
+		# os=-sunos4
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	or32-*)
+		os=-coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-haiku)
+		os=-haiku
+		;;
+	*-ibm)
+		os=-aix
+		;;
+    	*-knuth)
+		os=-mmixware
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+	*-gould)
+		os=-sysv
+		;;
+	*-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+	*-sgi)
+		os=-irix
+		;;
+	*-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-os400*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-tpf*)
+				vendor=ibm
+				;;
+			-vxsim* | -vxworks* | -windiss*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:

Added: freeswitch/trunk/libs/speex/configure
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/configure	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,22773 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.59.
+#
+# Copyright (C) 2003 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)$' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\/\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
+  # Find who we are.  Look in the path if we contain no path at all
+  # relative or not.
+  case $0 in
+    *[\\/]* ) as_myself=$0 ;;
+    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+       ;;
+  esac
+  # We did not find ourselves, most probably we were run as `sh COMMAND'
+  # in which case we are not to be found in the path.
+  if test "x$as_myself" = x; then
+    as_myself=$0
+  fi
+  if test ! -f "$as_myself"; then
+    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+   { (exit 1); exit 1; }; }
+  fi
+  case $CONFIG_SHELL in
+  '')
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for as_base in sh bash ksh sh5; do
+	 case $as_dir in
+	 /*)
+	   if ("$as_dir/$as_base" -c '
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+	     CONFIG_SHELL=$as_dir/$as_base
+	     export CONFIG_SHELL
+	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+	   fi;;
+	 esac
+       done
+done
+;;
+  esac
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line before each line; the second 'sed' does the real
+  # work.  The second script uses 'N' to pair each line-number line
+  # with the numbered line, and appends trailing '-' during
+  # substitution so that $LINENO is not a special case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
+  sed '=' <$as_myself |
+    sed '
+      N
+      s,$,-,
+      : loop
+      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      t loop
+      s,-$,,
+      s,^['$as_cr_digits']*\n,,
+    ' >$as_me.lineno &&
+  chmod +x $as_me.lineno ||
+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensible to this).
+  . ./$as_me.lineno
+  # Exit status is that of the last command.
+  exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+  *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T='	' ;;
+  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  # We could just check for DJGPP; but this test a) works b) is more generic
+  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+  if test -f conf$$.exe; then
+    # Don't use ln at all; we don't have any links
+    as_ln_s='cp -p'
+  else
+    as_ln_s='ln -s'
+  fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" 	$as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+  ;;
+esac
+
+echo=${ECHO-echo}
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
+       echo_test_string=`eval $cmd` &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+    then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+   test "X$echo_testing_string" = "X$echo_test_string"; then
+  :
+else
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for dir in $PATH /usr/ucb; do
+    IFS="$lt_save_ifs"
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running configure again with it.
+      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+    else
+      # Try using printf.
+      echo='printf %s\n'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+	 test "X$echo_testing_string" = "X$echo_test_string"; then
+	# Cool, printf works
+	:
+      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	export CONFIG_SHELL
+	SHELL="$CONFIG_SHELL"
+	export SHELL
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      else
+	# maybe with a smaller string...
+	prev=:
+
+	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+	  then
+	    break
+	  fi
+	  prev="$cmd"
+	done
+
+	if test "$prev" != 'sed 50q "$0"'; then
+	  echo_test_string=`eval $prev`
+	  export echo_test_string
+	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+	else
+	  # Oops.  We lost completely, so just stick with echo.
+	  echo=echo
+	fi
+      fi
+    fi
+  fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+fi
+
+
+
+
+tagnames=${tagnames+${tagnames},}CXX
+
+tagnames=${tagnames+${tagnames},}F77
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+exec 6>&1
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_config_libobj_dir=.
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete.  It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+
+ac_unique_file="libspeex/speex.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#if HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#if HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#if STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# if HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#if HAVE_STRING_H
+# if !STDC_HEADERS && HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#if HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#if HAVE_INTTYPES_H
+# include <inttypes.h>
+#else
+# if HAVE_STDINT_H
+#  include <stdint.h>
+# endif
+#endif
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS SPEEX_LT_CURRENT SPEEX_LT_REVISION SPEEX_LT_AGE SPEEX_VERSION INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT build build_cpu build_vendor build_os host host_cpu host_vendor host_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL OGG_CFLAGS OGG_LIBS src LIBOBJS SIZE16 SIZE32 LTLIBOBJS'
+ac_subst_files=''
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+ac_prev=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_option in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+   { (exit 1); exit 1; }; }
+    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+    eval "enable_$ac_feature=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+   { (exit 1); exit 1; }; }
+    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+    case $ac_option in
+      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_$ac_feature='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid package name: $ac_package" >&2
+   { (exit 1); exit 1; }; }
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case $ac_option in
+      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_$ac_package='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid package name: $ac_package" >&2
+   { (exit 1); exit 1; }; }
+    ac_package=`echo $ac_package | sed 's/-/_/g'`
+    eval "with_$ac_package=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; }
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+   { (exit 1); exit 1; }; }
+    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+    eval "$ac_envvar='$ac_optarg'"
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  { echo "$as_me: error: missing argument to $ac_option" >&2
+   { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+  eval ac_val=$`echo $ac_var`
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+	      localstatedir libdir includedir oldincludedir infodir mandir
+do
+  eval ac_val=$`echo $ac_var`
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* ) ;;
+    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used." >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_confdir=`(dirname "$0") 2>/dev/null ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$0" : 'X\(//\)[^/]' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$0" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+   { (exit 1); exit 1; }; }
+  else
+    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+   { (exit 1); exit 1; }; }
+  fi
+fi
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+   { (exit 1); exit 1; }; }
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CC_set=${CC+set}
+ac_env_CC_value=$CC
+ac_cv_env_CC_set=${CC+set}
+ac_cv_env_CC_value=$CC
+ac_env_CFLAGS_set=${CFLAGS+set}
+ac_env_CFLAGS_value=$CFLAGS
+ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+ac_env_CPP_set=${CPP+set}
+ac_env_CPP_value=$CPP
+ac_cv_env_CPP_set=${CPP+set}
+ac_cv_env_CPP_value=$CPP
+ac_env_CXX_set=${CXX+set}
+ac_env_CXX_value=$CXX
+ac_cv_env_CXX_set=${CXX+set}
+ac_cv_env_CXX_value=$CXX
+ac_env_CXXFLAGS_set=${CXXFLAGS+set}
+ac_env_CXXFLAGS_value=$CXXFLAGS
+ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set}
+ac_cv_env_CXXFLAGS_value=$CXXFLAGS
+ac_env_CXXCPP_set=${CXXCPP+set}
+ac_env_CXXCPP_value=$CXXCPP
+ac_cv_env_CXXCPP_set=${CXXCPP+set}
+ac_cv_env_CXXCPP_value=$CXXCPP
+ac_env_F77_set=${F77+set}
+ac_env_F77_value=$F77
+ac_cv_env_F77_set=${F77+set}
+ac_cv_env_F77_value=$F77
+ac_env_FFLAGS_set=${FFLAGS+set}
+ac_env_FFLAGS_value=$FFLAGS
+ac_cv_env_FFLAGS_set=${FFLAGS+set}
+ac_cv_env_FFLAGS_value=$FFLAGS
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+_ACEOF
+
+  cat <<_ACEOF
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+			  [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+			  [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR           user executables [EPREFIX/bin]
+  --sbindir=DIR          system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR       program executables [EPREFIX/libexec]
+  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
+  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
+  --libdir=DIR           object code libraries [EPREFIX/lib]
+  --includedir=DIR       C header files [PREFIX/include]
+  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
+  --infodir=DIR          info documentation [PREFIX/info]
+  --mandir=DIR           man documentation [PREFIX/man]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-maintainer-mode  enable make rules and dependencies not useful
+			  (and sometimes confusing) to the casual installer
+  --enable-shared[=PKGS]
+                          build shared libraries [default=yes]
+  --enable-static[=PKGS]
+                          build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+  --disable-oggtest       Do not try to compile and run a test Ogg program
+  --disable-wideband      Disable wideband codec
+  --enable-vorbis-psy       Enable Vorbis-style psychoacoustics (EXPERIMENTAL)
+  --enable-valgrind       Enable valgrind extra checks
+  --enable-sse            Enable SSE support
+  --enable-fixed-point    Compile as fixed-point
+  --enable-arm4-asm       Make use of ARM4 assembly optimizations
+  --enable-arm5e-asm      Make use of ARM5E assembly optimizations
+  --enable-blackfin-asm      Make use of Blackfin assembly optimizations
+  --enable-fixed-point-debug  Debug fixed-point implementation
+  --enable-epic-48k       Enable support for Epic 4.8 kbps mode
+  --enable-ti-c55x        Enable support for TI C55X DSP
+  --enable-16bit-precision Reduce precision to 16 bits (EXPERIMENTAL)
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-pic              try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-tags[=TAGS]
+                          include additional configurations [automatic]
+  --with-ogg=PFX   Prefix where libogg is installed (optional)
+  --with-ogg-libraries=DIR   Directory where libogg library is installed (optional)
+  --with-ogg-includes=DIR   Directory where libogg header files are installed (optional)
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
+              headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+  CXX         C++ compiler command
+  CXXFLAGS    C++ compiler flags
+  CXXCPP      C++ preprocessor
+  F77         Fortran 77 compiler command
+  FFLAGS      Fortran 77 compiler flags
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+_ACEOF
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  ac_popdir=`pwd`
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d $ac_dir || continue
+    ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+  case "$ac_dir" in
+  .) ac_abs_builddir=`pwd`;;
+  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+  *) ac_abs_builddir=`pwd`/"$ac_dir";;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+  case ${ac_top_builddir}. in
+  .) ac_abs_top_builddir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+  case $ac_srcdir in
+  .) ac_abs_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+  case $ac_top_srcdir in
+  .) ac_abs_top_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+  esac;;
+esac
+
+    cd $ac_dir
+    # Check for guested configure; otherwise get Cygnus style configure.
+    if test -f $ac_srcdir/configure.gnu; then
+      echo
+      $SHELL $ac_srcdir/configure.gnu  --help=recursive
+    elif test -f $ac_srcdir/configure; then
+      echo
+      $SHELL $ac_srcdir/configure  --help=recursive
+    elif test -f $ac_srcdir/configure.ac ||
+	   test -f $ac_srcdir/configure.in; then
+      echo
+      $ac_configure --help
+    else
+      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi
+    cd "$ac_popdir"
+  done
+fi
+
+test -n "$ac_init_help" && exit 0
+if $ac_init_version; then
+  cat <<\_ACEOF
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit 0
+fi
+exec 5>config.log
+cat >&5 <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.59.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  echo "PATH: $as_dir"
+done
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_sep=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+    2)
+      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+      # Get rid of the leading space.
+      ac_sep=" "
+      ;;
+    esac
+  done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+{
+  (set) 2>&1 |
+    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+    *ac_space=\ *)
+      sed -n \
+	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+      ;;
+    *)
+      sed -n \
+	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      ;;
+    esac;
+}
+    echo
+
+    cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=$`echo $ac_var`
+      echo "$ac_var='"'"'$ac_val'"'"'"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=$`echo $ac_var`
+	echo "$ac_var='"'"'$ac_val'"'"'"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+      echo
+      sed "/^$/d" confdefs.h | sort
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      echo "$as_me: caught signal $ac_signal"
+    echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core &&
+  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+     ' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special
+  # files actually), so we avoid doing that.
+  if test -f "$cache_file"; then
+    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . $cache_file;;
+      *)                      . ./$cache_file;;
+    esac
+  fi
+else
+  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+  eval ac_new_val="\$ac_env_${ac_var}_value"
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
+echo "$as_me:   former value:  $ac_old_val" >&2;}
+	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
+echo "$as_me:   current value: $ac_new_val" >&2;}
+	ac_cache_corrupted=:
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+          ac_config_headers="$ac_config_headers config.h"
+
+
+SPEEX_MAJOR_VERSION=1
+SPEEX_MINOR_VERSION=1
+SPEEX_MICRO_VERSION=13
+SPEEX_EXTRA_VERSION=
+#SPEEX_VERSION=
+SPEEX_VERSION=$SPEEX_MAJOR_VERSION.$SPEEX_MINOR_VERSION.$SPEEX_MICRO_VERSION$SPEEX_EXTRA_VERSION
+SPEEX_VERSION="1.2beta1"
+
+SPEEX_LT_CURRENT=5
+SPEEX_LT_REVISION=0
+SPEEX_LT_AGE=4
+
+
+
+
+
+# For automake.
+VERSION=$SPEEX_VERSION
+PACKAGE=speex
+
+
+
+am__api_version="1.8"
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f $ac_dir/shtool; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+  ./ | .// | /cC/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	    break 3
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+done
+
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL=$ac_install_sh
+  fi
+fi
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&2;}
+   { (exit 1); exit 1; }; }
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+test "$program_prefix" != NONE &&
+  program_transform_name="s,^,$program_prefix,;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+# Double any \ or $.  echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm conftest.sed
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+  # Keeping the `.' argument allows $(mkdir_p) to be used without
+  # argument.  Indeed, we sometimes output rules like
+  #   $(mkdir_p) $(somedir)
+  # where $(somedir) is conditionally defined.
+  # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more
+  # expensive solution, as it forces Make to start a sub-shell.)
+  mkdir_p='mkdir -p -- .'
+else
+  # On NextStep and OpenStep, the `mkdir' command does not
+  # recognize any option.  It will interpret all options as
+  # directories to create, and then abort because `.' already
+  # exists.
+  for d in ./-p ./--version;
+  do
+    test -d $d && rmdir $d
+  done
+  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+  if test -f "$ac_aux_dir/mkinstalldirs"; then
+    mkdir_p='$(mkinstalldirs)'
+  else
+    mkdir_p='$(install_sh) -d'
+  fi
+fi
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AWK+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AWK="$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  test -n "$AWK" && break
+done
+
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.make <<\_ACEOF
+all:
+	@echo 'ac_maketemp="$(MAKE)"'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftest.make
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+  SET_MAKE=
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+   test -f $srcdir/config.status; then
+  { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE=$PACKAGE
+ VERSION=$VERSION
+
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  STRIP=$ac_ct_STRIP
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+
+
+
+echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
+    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+  enableval="$enable_maintainer_mode"
+  USE_MAINTAINER_MODE=$enableval
+else
+  USE_MAINTAINER_MODE=no
+fi;
+  echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
+
+
+if test $USE_MAINTAINER_MODE = yes; then
+  MAINTAINER_MODE_TRUE=
+  MAINTAINER_MODE_FALSE='#'
+else
+  MAINTAINER_MODE_TRUE='#'
+  MAINTAINER_MODE_FALSE=
+fi
+
+  MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+# Make sure we can run config.sub.
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+   { (exit 1); exit 1; }; }
+
+echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
+if test "${ac_cv_build+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+  ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
+  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+   { (exit 1); exit 1; }; }
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
+build=$ac_cv_build
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
+if test "${ac_cv_host+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+  ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
+host=$ac_cv_host
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+  enableval="$enable_shared"
+  p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_shared=yes
+fi;
+
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+  enableval="$enable_static"
+  p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi;
+
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+  enableval="$enable_fast_install"
+  p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi;
+
+DEPDIR="${am__leading_dot}deps"
+
+          ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+   am__include=include
+   am__quote=
+   _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+      am__include=.include
+      am__quote="\""
+      _am_result=BSD
+   fi
+fi
+
+
+echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then
+  enableval="$enable_dependency_tracking"
+
+fi;
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+
+
+if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  CC=$ac_ct_CC
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="cc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  CC=$ac_ct_CC
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  test -n "$ac_ct_CC" && break
+done
+
+  CC=$ac_ct_CC
+fi
+
+fi
+
+
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+     "checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+  (eval $ac_compiler --version </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+  (eval $ac_compiler -v </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+  (eval $ac_compiler -V </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+  (eval $ac_link_default) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # Find the output, starting from the most likely.  This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+
+# Be careful to initialize this variable, since it used to be cached.
+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ac_cv_exeext=
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+	;;
+    conftest.$ac_ext )
+	# This is the source file.
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	# FIXME: I believe we export ac_cv_exeext for Libtool,
+	# but it would be cool to find out if it's true.  Does anybody
+	# maintain Libtool? --akim.
+	export ac_cv_exeext
+	break;;
+    * )
+	break;;
+  esac
+done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
+   { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
+
+# Check the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+  if { ac_try='./$ac_file'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+    fi
+  fi
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
+
+echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  export ac_cv_exeext
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+if test "${ac_cv_objext+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_compiler_gnu=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+CFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_g+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cc_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_cc_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std1 is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std1.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX			-qlanglvl=ansi
+# Ultrix and OSF/1	-std1
+# HP-UX 10.20 and later	-Ae
+# HP-UX older versions	-Aa -D_HPUX_SOURCE
+# SVR4			-Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
+
+fi
+
+case "x$ac_cv_prog_cc_stdc" in
+  x|xno)
+    echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+  *)
+    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+    CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
+# Some people use a C++ compiler to compile C.  Since we use `exit',
+# in C++ we need to declare it.  In case someone uses the same compiler
+# for both compiling C and C++ we need to have the C++ compiler decide
+# the declaration of exit, since it's the most demanding environment.
+cat >conftest.$ac_ext <<_ACEOF
+#ifndef __cplusplus
+  choke me
+#endif
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  for ac_declaration in \
+   '' \
+   'extern "C" void std::exit (int) throw (); using std::exit;' \
+   'extern "C" void std::exit (int); using std::exit;' \
+   'extern "C" void exit (int) throw ();' \
+   'extern "C" void exit (int);' \
+   'void exit (int);'
+do
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+  echo '#ifdef __cplusplus' >>confdefs.h
+  echo $ac_declaration      >>confdefs.h
+  echo '#endif'             >>confdefs.h
+fi
+
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CC"   am_compiler_list=
+
+echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+
+
+if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6
+if test "${lt_cv_path_SED+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f $lt_ac_sed && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test $lt_ac_count -gt 10 && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test $lt_ac_count -gt $lt_ac_max; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
+
+fi
+
+SED=$lt_cv_path_SED
+echo "$as_me:$LINENO: result: $SED" >&5
+echo "${ECHO_T}$SED" >&6
+
+echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+    then ac_cv_prog_egrep='grep -E'
+    else ac_cv_prog_egrep='egrep'
+    fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+  withval="$with_gnu_ld"
+  test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi;
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+else
+  echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+fi
+if test "${lt_cv_path_LD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
+echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+if test "${lt_cv_prog_gnu_ld+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
+if test "${lt_cv_ld_reload_flag+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
+echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
+if test "${lt_cv_path_NM+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi
+fi
+echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
+echo "${ECHO_T}$lt_cv_path_NM" >&6
+NM="$lt_cv_path_NM"
+
+echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+  echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6
+fi
+
+echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
+echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6
+if test "${lt_cv_deplibs_check_method+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix4* | aix5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump'.
+  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | kfreebsd*-gnu | dragonfly*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix3*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+nto-qnx*)
+  lt_cv_deplibs_check_method=unknown
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+  enableval="$enable_libtool_lock"
+
+fi;
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *ELF-32*)
+      HPUX_IA64_MODE="32"
+      ;;
+    *ELF-64*)
+      HPUX_IA64_MODE="64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line 3700 "configure"' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+   if test "$lt_cv_prog_gnu_ld" = yes; then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -melf32bsmip"
+      ;;
+    *N32*)
+      LD="${LD-ld} -melf32bmipn32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -melf64bmip"
+      ;;
+    esac
+   else
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+   fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case `/usr/bin/file conftest.o` in
+    *32-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_i386"
+          ;;
+        ppc64-*linux*|powerpc64-*linux*)
+          LD="${LD-ld} -m elf32ppclinux"
+          ;;
+        s390x-*linux*)
+          LD="${LD-ld} -m elf_s390"
+          ;;
+        sparc64-*linux*)
+          LD="${LD-ld} -m elf32_sparc"
+          ;;
+      esac
+      ;;
+    *64-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        ppc*-*linux*|powerpc*-*linux*)
+          LD="${LD-ld} -m elf64ppc"
+          ;;
+        s390*-*linux*)
+          LD="${LD-ld} -m elf64_s390"
+          ;;
+        sparc*-*linux*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
+if test "${lt_cv_cc_needs_belf+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  lt_cv_cc_needs_belf=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+lt_cv_cc_needs_belf=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+sparc*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      *)    LD="${LD-ld} -64" ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+
+esac
+
+need_locks="$enable_libtool_lock"
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if test "${ac_cv_prog_CPP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether non-existent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  # Broken: success on invalid input.
+continue
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether non-existent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  # Broken: success on invalid input.
+continue
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  :
+else
+  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_header_stdc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then
+  :
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then
+  :
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then
+  :
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      exit(2);
+  exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+
+
+
+
+
+
+
+
+
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  eval "$as_ac_Header=yes"
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_Header=no"
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+for ac_header in dlfcn.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+  # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_header_compiler=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  ac_header_preproc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+  yes:no: )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+    ac_header_preproc=yes
+    ;;
+  no:yes:* )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------------ ##
+## Report this to the AC_PACKAGE_NAME lists.  ##
+## ------------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CXX+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CXX"; then
+  ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+  echo "$as_me:$LINENO: result: $CXX" >&5
+echo "${ECHO_T}$CXX" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+    test -n "$CXX" && break
+  done
+fi
+if test -z "$CXX"; then
+  ac_ct_CXX=$CXX
+  for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CXX"; then
+  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CXX="$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+  echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
+echo "${ECHO_T}$ac_ct_CXX" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  test -n "$ac_ct_CXX" && break
+done
+test -n "$ac_ct_CXX" || ac_ct_CXX="g++"
+
+  CXX=$ac_ct_CXX
+fi
+
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+     "checking for C++ compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+  (eval $ac_compiler --version </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+  (eval $ac_compiler -v </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+  (eval $ac_compiler -V </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+
+echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6
+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_compiler_gnu=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6
+GXX=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+CXXFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
+echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cxx_g+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cxx_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_cxx_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
+if test "$ac_test_CXXFLAGS" = set; then
+  CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+  if test "$GXX" = yes; then
+    CXXFLAGS="-g -O2"
+  else
+    CXXFLAGS="-g"
+  fi
+else
+  if test "$GXX" = yes; then
+    CXXFLAGS="-O2"
+  else
+    CXXFLAGS=
+  fi
+fi
+for ac_declaration in \
+   '' \
+   'extern "C" void std::exit (int) throw (); using std::exit;' \
+   'extern "C" void std::exit (int); using std::exit;' \
+   'extern "C" void exit (int) throw ();' \
+   'extern "C" void exit (int);' \
+   'void exit (int);'
+do
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+  echo '#ifdef __cplusplus' >>confdefs.h
+  echo $ac_declaration      >>confdefs.h
+  echo '#endif'             >>confdefs.h
+fi
+
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+depcc="$CXX"  am_compiler_list=
+
+echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CXX_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CXX_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+
+
+if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+  am__fastdepCXX_TRUE=
+  am__fastdepCXX_FALSE='#'
+else
+  am__fastdepCXX_TRUE='#'
+  am__fastdepCXX_FALSE=
+fi
+
+
+
+
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
+echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6
+if test -z "$CXXCPP"; then
+  if test "${ac_cv_prog_CXXCPP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+      # Double quotes because CXXCPP needs to be expanded
+    for CXXCPP in "$CXX -E" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_cxx_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether non-existent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_cxx_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  # Broken: success on invalid input.
+continue
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  break
+fi
+
+    done
+    ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+  CXXCPP=$ac_cv_prog_CXXCPP
+else
+  ac_cv_prog_CXXCPP=$CXXCPP
+fi
+echo "$as_me:$LINENO: result: $CXXCPP" >&5
+echo "${ECHO_T}$CXXCPP" >&6
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_cxx_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether non-existent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_cxx_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  # Broken: success on invalid input.
+continue
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  :
+else
+  { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+fi
+
+
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_F77+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$F77"; then
+  ac_cv_prog_F77="$F77" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+F77=$ac_cv_prog_F77
+if test -n "$F77"; then
+  echo "$as_me:$LINENO: result: $F77" >&5
+echo "${ECHO_T}$F77" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+    test -n "$F77" && break
+  done
+fi
+if test -z "$F77"; then
+  ac_ct_F77=$F77
+  for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_F77"; then
+  ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_F77="$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+ac_ct_F77=$ac_cv_prog_ac_ct_F77
+if test -n "$ac_ct_F77"; then
+  echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
+echo "${ECHO_T}$ac_ct_F77" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  test -n "$ac_ct_F77" && break
+done
+
+  F77=$ac_ct_F77
+fi
+
+
+# Provide some information about the compiler.
+echo "$as_me:5291:" \
+     "checking for Fortran 77 compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+  (eval $ac_compiler --version </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+  (eval $ac_compiler -v </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+  (eval $ac_compiler -V </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+rm -f a.out
+
+# If we don't use `.F' as extension, the preprocessor is not run on the
+# input file.  (Note that this only needs to work for GNU compilers.)
+ac_save_ext=$ac_ext
+ac_ext=F
+echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6
+if test "${ac_cv_f77_compiler_gnu+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+      program main
+#ifndef __GNUC__
+       choke me
+#endif
+
+      end
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_f77_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_compiler_gnu=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_f77_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6
+ac_ext=$ac_save_ext
+ac_test_FFLAGS=${FFLAGS+set}
+ac_save_FFLAGS=$FFLAGS
+FFLAGS=
+echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
+echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_f77_g+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  FFLAGS=-g
+cat >conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_f77_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_f77_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_f77_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
+echo "${ECHO_T}$ac_cv_prog_f77_g" >&6
+if test "$ac_test_FFLAGS" = set; then
+  FFLAGS=$ac_save_FFLAGS
+elif test $ac_cv_prog_f77_g = yes; then
+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
+    FFLAGS="-g -O2"
+  else
+    FFLAGS="-g"
+  fi
+else
+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
+    FFLAGS="-O2"
+  else
+    FFLAGS=
+  fi
+fi
+
+G77=`test $ac_compiler_gnu = yes && echo yes`
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# find the maximum length of command line arguments
+echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ 	]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    # If test is not a shell built-in, we'll probably end up computing a
+    # maximum length that is only half of the actual maximum length, but
+    # we can't tell.
+    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+    while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
+	       = "XX$teststring") >/dev/null 2>&1 &&
+	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
+	    lt_cv_sys_max_cmd_len=$new_result &&
+	    test $i != 17 # 1/2 MB should be enough
+    do
+      i=`expr $i + 1`
+      teststring=$teststring$teststring
+    done
+    teststring=
+    # Add a significant safety factor because C++ compilers can tack on massive
+    # amounts of additional arguments before passing them to the linker.
+    # It appears as though 1/2 is a usable value.
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
+else
+  echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6
+fi
+
+
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*) # Its linker distinguishes data from code symbols
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  ;;
+linux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDGIRSTW]'
+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if grep ' nm_test_var$' "$nlist" >/dev/null; then
+	if grep ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+
+	  cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{
+EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
+	  cat <<\EOF >> conftest.$ac_ext
+  {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -f conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  echo "$as_me:$LINENO: result: failed" >&5
+echo "${ECHO_T}failed" >&6
+else
+  echo "$as_me:$LINENO: result: ok" >&5
+echo "${ECHO_T}ok" >&6
+fi
+
+echo "$as_me:$LINENO: checking for objdir" >&5
+echo $ECHO_N "checking for objdir... $ECHO_C" >&6
+if test "${lt_cv_objdir+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
+echo "${ECHO_T}$lt_cv_objdir" >&6
+objdir=$lt_cv_objdir
+
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+# Constants:
+rm="rm -f"
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="${ac_tool_prefix}ar"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+  ac_ct_AR=$AR
+  # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AR="ar"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false"
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  AR=$ac_ct_AR
+else
+  AR="$ac_cv_prog_AR"
+fi
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  RANLIB=$ac_ct_RANLIB
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  STRIP=$ac_ct_STRIP
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$SED" && SED=sed
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool at gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    echo "$as_me:$LINENO: checking for file" >&5
+echo $ECHO_N "checking for file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool at gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+enable_dlopen=no
+enable_win32_dll=no
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+  enableval="$enable_libtool_lock"
+
+fi;
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+  withval="$with_pic"
+  pic_mode="$withval"
+else
+  pic_mode=default
+fi;
+test -z "$pic_mode" && pic_mode=default
+
+# Use C for the default configuration in the libtool script
+tagname=
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}\n'
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+
+
+echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:6352: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:6356: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+      ;;
+
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         lt_prog_compiler_pic='-qnocommon'
+         lt_prog_compiler_wl='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    linux*)
+      case $cc_basename in
+      icc* | ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      esac
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic" >&6
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6
+if test "${lt_prog_compiler_pic_works+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_pic_works=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:6620: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:6624: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_prog_compiler_pic_works=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6
+
+if test x"$lt_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_prog_compiler_static_works=yes
+       fi
+     else
+       lt_prog_compiler_static_works=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works" >&6
+
+if test x"$lt_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:6724: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:6728: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
+  if test "$hard_links" = no; then
+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+  runpath_var=
+  allow_undefined_flag=
+  enable_shared_with_static_runtimes=no
+  archive_cmds=
+  archive_expsym_cmds=
+  old_archive_From_new_cmds=
+  old_archive_from_expsyms_cmds=
+  export_dynamic_flag_spec=
+  whole_archive_flag_spec=
+  thread_safe_flag_spec=
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_flag_spec_ld=
+  hardcode_libdir_separator=
+  hardcode_direct=no
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  link_all_deplibs=unknown
+  hardcode_automatic=no
+  module_cmds=
+  module_expsym_cmds=
+  always_export_symbols=no
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix3* | aix4* | aix5*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+
+      # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      ld_shlibs=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    interix3*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    linux*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+	link_all_deplibs=no
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix4* | aix5*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	  for ld_flag in $LDFLAGS; do
+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+  	    aix_use_runtimelinking=yes
+  	    break
+  	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+  	  # We have reworked collect2
+  	  hardcode_direct=yes
+	  else
+  	  # We have old collect2
+  	  hardcode_direct=unsupported
+  	  # It fails to find uninstalled libraries when the uninstalled
+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
+  	  # to unsupported forces relinking
+  	  hardcode_minus_L=yes
+  	  hardcode_libdir_flag_spec='-L$libdir'
+  	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+  	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+       hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  whole_archive_flag_spec='$convenience'
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      # see comment about different semantics on the GNU ld section
+      ld_shlibs=no
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec=' '
+      allow_undefined_flag=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      old_archive_From_new_cmds='true'
+      # FIXME: Should let the user specify the lib program.
+      old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path='`cygpath -w "$srcfile"`'
+      enable_shared_with_static_runtimes=yes
+      ;;
+
+    darwin* | rhapsody*)
+      case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+      esac
+      archive_cmds_need_lc=no
+      hardcode_direct=no
+      hardcode_automatic=yes
+      hardcode_shlibpath_var=unsupported
+      whole_archive_flag_spec=''
+      link_all_deplibs=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+      archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs=no
+          ;;
+      esac
+    fi
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    freebsd1*)
+      ld_shlibs=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # GNU/kFreeBSD uses gcc -shared to do shared libraries.
+    kfreebsd*-gnu)
+      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      link_all_deplibs=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	hardcode_direct=yes
+	export_dynamic_flag_spec='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_libdir_flag_spec_ld='+b $libdir'
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_ld='-rpath $libdir'
+      fi
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      link_all_deplibs=yes
+      ;;
+
+    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    openbsd*)
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec='${wl}-E'
+      else
+       case $host_os in
+	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	   archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	   hardcode_libdir_flag_spec='-R$libdir'
+	   ;;
+	 *)
+	   archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	   hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	   ;;
+       esac
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z text'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+	wlarc=''
+	archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+ 	# The compiler driver will combine linker options so we
+ 	# cannot just pass the convience library names through
+ 	# without $wl, iff we do not link with $LD.
+ 	# Luckily, gcc supports the same syntax we need for Sun Studio.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+ 	case $wlarc in
+ 	'')
+ 	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+ 	*)
+ 	  whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ 	esac ;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $ld_shlibs" >&5
+echo "${ECHO_T}$ld_shlibs" >&6
+test "$ld_shlibs" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+      $rm conftest*
+      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl
+	pic_flag=$lt_prog_compiler_pic
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag
+        allow_undefined_flag=
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+        then
+	  archive_cmds_need_lc=no
+        else
+	  archive_cmds_need_lc=yes
+        fi
+        allow_undefined_flag=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
+echo "${ECHO_T}$archive_cmds_need_lc" >&6
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+  if test "$GCC" = yes; then
+    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+  else
+    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+  fi
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  freebsd*) # from 4.6 on
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+interix3*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
+knetbsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+   test -n "$runpath_var" || \
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action" >&5
+echo "${ECHO_T}$hardcode_action" >&6
+
+if test "$hardcode_action" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+striplib=
+old_striplib=
+echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+   darwin*)
+       if test -n "$STRIP" ; then
+         striplib="$STRIP -x"
+         echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+       else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+       ;;
+   *)
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+    ;;
+  esac
+fi
+
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+   ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+   ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dl_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+   ;;
+
+  *)
+    echo "$as_me:$LINENO: checking for shl_load" >&5
+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
+if test "${ac_cv_func_shl_load+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define shl_load innocuous_shl_load
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char shl_load (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef shl_load
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char shl_load ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
+choke me
+#else
+char (*f) () = shl_load;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != shl_load;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_func_shl_load=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_shl_load=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+echo "${ECHO_T}$ac_cv_func_shl_load" >&6
+if test $ac_cv_func_shl_load = yes; then
+  lt_cv_dlopen="shl_load"
+else
+  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_shl_load+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char shl_load ();
+int
+main ()
+{
+shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dld_shl_load=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dld_shl_load=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
+if test $ac_cv_lib_dld_shl_load = yes; then
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
+else
+  echo "$as_me:$LINENO: checking for dlopen" >&5
+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
+if test "${ac_cv_func_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define dlopen innocuous_dlopen
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char dlopen (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef dlopen
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
+choke me
+#else
+char (*f) () = dlopen;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != dlopen;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_func_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+echo "${ECHO_T}$ac_cv_func_dlopen" >&6
+if test $ac_cv_func_dlopen = yes; then
+  lt_cv_dlopen="dlopen"
+else
+  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dl_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
+if test "${ac_cv_lib_svld_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_svld_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_svld_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
+if test $ac_cv_lib_svld_dlopen = yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_dld_link+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dld_link ();
+int
+main ()
+{
+dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dld_dld_link=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dld_dld_link=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
+if test $ac_cv_lib_dld_dld_link = yes; then
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+#line 9082 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+    exit (status);
+}
+EOF
+  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self" >&6
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self_static+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+#line 9182 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+    exit (status);
+}
+EOF
+  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+# Report which library types will actually be built
+echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $can_build_shared" >&5
+echo "${ECHO_T}$can_build_shared" >&6
+
+echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix4* | aix5*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+    ;;
+esac
+echo "$as_me:$LINENO: result: $enable_shared" >&5
+echo "${ECHO_T}$enable_shared" >&6
+
+echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+echo "$as_me:$LINENO: result: $enable_static" >&5
+echo "${ECHO_T}$enable_static" >&6
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler \
+    CC \
+    LD \
+    lt_prog_compiler_wl \
+    lt_prog_compiler_pic \
+    lt_prog_compiler_static \
+    lt_prog_compiler_no_builtin_flag \
+    export_dynamic_flag_spec \
+    thread_safe_flag_spec \
+    whole_archive_flag_spec \
+    enable_shared_with_static_runtimes \
+    old_archive_cmds \
+    old_archive_from_new_cmds \
+    predep_objects \
+    postdep_objects \
+    predeps \
+    postdeps \
+    compiler_lib_search_path \
+    archive_cmds \
+    archive_expsym_cmds \
+    postinstall_cmds \
+    postuninstall_cmds \
+    old_archive_from_expsyms_cmds \
+    allow_undefined_flag \
+    no_undefined_flag \
+    export_symbols_cmds \
+    hardcode_libdir_flag_spec \
+    hardcode_libdir_flag_spec_ld \
+    hardcode_libdir_separator \
+    hardcode_automatic \
+    module_cmds \
+    module_expsym_cmds \
+    lt_cv_prog_compiler_c_o \
+    exclude_expsyms \
+    include_expsyms; do
+
+    case $var in
+    old_archive_cmds | \
+    old_archive_from_new_cmds | \
+    archive_cmds | \
+    archive_expsym_cmds | \
+    module_cmds | \
+    module_expsym_cmds | \
+    old_archive_from_expsyms_cmds | \
+    export_symbols_cmds | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+cfgfile="${ofile}T"
+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+  $rm -f "$cfgfile"
+  { echo "$as_me:$LINENO: creating $ofile" >&5
+echo "$as_me: creating $ofile" >&6;}
+
+  cat <<__EOF__ >> "$cfgfile"
+#! $SHELL
+
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+#
+# This file is part of GNU Libtool:
+# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="$SED -e 1s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# The names of the tagged configurations supported by this script.
+available_tags=
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# ### END LIBTOOL CONFIG
+
+__EOF__
+
+
+  case $host_os in
+  aix3*)
+    cat <<\EOF >> "$cfgfile"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+    ;;
+  esac
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" || \
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+# Check whether --with-tags or --without-tags was given.
+if test "${with_tags+set}" = set; then
+  withval="$with_tags"
+  tagnames="$withval"
+fi;
+
+if test -f "$ltmain" && test -n "$tagnames"; then
+  if test ! -f "${ofile}"; then
+    { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
+echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
+  fi
+
+  if test -z "$LTCC"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
+    if test -z "$LTCC"; then
+      { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
+echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
+    else
+      { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
+echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
+    fi
+  fi
+  if test -z "$LTCFLAGS"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
+  fi
+
+  # Extract list of available tagged configurations in $ofile.
+  # Note that this assumes the entire list is on one line.
+  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+
+  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+  for tagname in $tagnames; do
+    IFS="$lt_save_ifs"
+    # Check whether tagname contains only valid characters
+    case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
+    "") ;;
+    *)  { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
+echo "$as_me: error: invalid tag name: $tagname" >&2;}
+   { (exit 1); exit 1; }; }
+	;;
+    esac
+
+    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
+    then
+      { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
+echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
+   { (exit 1); exit 1; }; }
+    fi
+
+    # Update the list of available tags.
+    if test -n "$tagname"; then
+      echo appending configuration tag \"$tagname\" to $ofile
+
+      case $tagname in
+      CXX)
+	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+	    (test "X$CXX" != "Xg++"))) ; then
+	  ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+
+
+archive_cmds_need_lc_CXX=no
+allow_undefined_flag_CXX=
+always_export_symbols_CXX=no
+archive_expsym_cmds_CXX=
+export_dynamic_flag_spec_CXX=
+hardcode_direct_CXX=no
+hardcode_libdir_flag_spec_CXX=
+hardcode_libdir_flag_spec_ld_CXX=
+hardcode_libdir_separator_CXX=
+hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
+hardcode_automatic_CXX=no
+module_cmds_CXX=
+module_expsym_cmds_CXX=
+link_all_deplibs_CXX=unknown
+old_archive_cmds_CXX=$old_archive_cmds
+no_undefined_flag_CXX=
+whole_archive_flag_spec_CXX=
+enable_shared_with_static_runtimes_CXX=no
+
+# Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+objext_CXX=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_LD=$LD
+lt_save_GCC=$GCC
+GCC=$GXX
+lt_save_with_gnu_ld=$with_gnu_ld
+lt_save_path_LD=$lt_cv_path_LD
+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+else
+  $as_unset lt_cv_prog_gnu_ld
+fi
+if test -n "${lt_cv_path_LDCXX+set}"; then
+  lt_cv_path_LD=$lt_cv_path_LDCXX
+else
+  $as_unset lt_cv_path_LD
+fi
+test -z "${LDCXX+set}" || LD=$LDCXX
+CC=${CXX-"c++"}
+compiler=$CC
+compiler_CXX=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+# We don't want -fno-exception wen compiling C++ code, so set the
+# no_builtin_flag separately
+if test "$GXX" = yes; then
+  lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+else
+  lt_prog_compiler_no_builtin_flag_CXX=
+fi
+
+if test "$GXX" = yes; then
+  # Set up default GNU C++ configuration
+
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+  withval="$with_gnu_ld"
+  test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi;
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+else
+  echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+fi
+if test "${lt_cv_path_LD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
+echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+if test "${lt_cv_prog_gnu_ld+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+  # Check if GNU C++ uses GNU ld as the underlying linker, since the
+  # archiving commands below assume that GNU ld is being used.
+  if test "$with_gnu_ld" = yes; then
+    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+    #     investigate it a little bit more. (MM)
+    wlarc='${wl}'
+
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
+	grep 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec_CXX=
+    fi
+  else
+    with_gnu_ld=no
+    wlarc=
+
+    # A generic and very simple default shared library creation
+    # command for GNU C++ for the case where it uses the native
+    # linker, instead of GNU ld.  If possible, this setting should
+    # overridden to take advantage of the native linker features on
+    # the platform it is being used on.
+    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+  fi
+
+  # Commands to make compiler produce verbose output that lists
+  # what "hidden" libraries, object files and flags are used when
+  # linking a shared library.
+  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+else
+  GXX=no
+  with_gnu_ld=no
+  wlarc=
+fi
+
+# PORTME: fill in a description of your system's C++ link characteristics
+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+ld_shlibs_CXX=yes
+case $host_os in
+  aix3*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  aix4* | aix5*)
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      aix_use_runtimelinking=no
+
+      # Test if we are trying to use run time linking or normal
+      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+      # need to do runtime linking.
+      case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	for ld_flag in $LDFLAGS; do
+	  case $ld_flag in
+	  *-brtl*)
+	    aix_use_runtimelinking=yes
+	    break
+	    ;;
+	  esac
+	done
+	;;
+      esac
+
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+    archive_cmds_CXX=''
+    hardcode_direct_CXX=yes
+    hardcode_libdir_separator_CXX=':'
+    link_all_deplibs_CXX=yes
+
+    if test "$GXX" = yes; then
+      case $host_os in aix4.[012]|aix4.[012].*)
+      # We only want to do this on AIX 4.2 and lower, the check
+      # below for broken collect2 doesn't work under 4.3+
+	collect2name=`${CC} -print-prog-name=collect2`
+	if test -f "$collect2name" && \
+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	then
+	  # We have reworked collect2
+	  hardcode_direct_CXX=yes
+	else
+	  # We have old collect2
+	  hardcode_direct_CXX=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L_CXX=yes
+	  hardcode_libdir_flag_spec_CXX='-L$libdir'
+	  hardcode_libdir_separator_CXX=
+	fi
+	;;
+      esac
+      shared_flag='-shared'
+      if test "$aix_use_runtimelinking" = yes; then
+	shared_flag="$shared_flag "'${wl}-G'
+      fi
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	shared_flag='-G'
+      else
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag='${wl}-G'
+	else
+	  shared_flag='${wl}-bM:SRE'
+	fi
+      fi
+    fi
+
+    # It seems that -bexpall does not export symbols beginning with
+    # underscore (_), so it is better to generate a list of symbols to export.
+    always_export_symbols_CXX=yes
+    if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other runtime loading flags (-brtl),
+      # -berok will link without error, but may produce a broken library.
+      allow_undefined_flag_CXX='-berok'
+      # Determine the default libpath from the value encoded in an empty executable.
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+      hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+     else
+      if test "$host_cpu" = ia64; then
+	hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+	allow_undefined_flag_CXX="-z nodefs"
+	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+      else
+	# Determine the default libpath from the value encoded in an empty executable.
+	cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+	hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+	# Warning - without using the other run time loading flags,
+	# -berok will link without error, but may produce a broken library.
+	no_undefined_flag_CXX=' ${wl}-bernotok'
+	allow_undefined_flag_CXX=' ${wl}-berok'
+	# Exported symbols can be pulled into shared objects from archives
+	whole_archive_flag_spec_CXX='$convenience'
+	archive_cmds_need_lc_CXX=yes
+	# This is similar to how AIX traditionally builds its shared libraries.
+	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+      fi
+    fi
+    ;;
+
+  beos*)
+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      allow_undefined_flag_CXX=unsupported
+      # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    else
+      ld_shlibs_CXX=no
+    fi
+    ;;
+
+  chorus*)
+    case $cc_basename in
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+    # as there is no search path for DLLs.
+    hardcode_libdir_flag_spec_CXX='-L$libdir'
+    allow_undefined_flag_CXX=unsupported
+    always_export_symbols_CXX=no
+    enable_shared_with_static_runtimes_CXX=yes
+
+    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      # If the export-symbols file already is a .def file (1st line
+      # is EXPORTS), use it as is; otherwise, prepend...
+      archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	cp $export_symbols $output_objdir/$soname.def;
+      else
+	echo EXPORTS > $output_objdir/$soname.def;
+	cat $export_symbols >> $output_objdir/$soname.def;
+      fi~
+      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+    else
+      ld_shlibs_CXX=no
+    fi
+  ;;
+      darwin* | rhapsody*)
+        case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+        esac
+      archive_cmds_need_lc_CXX=no
+      hardcode_direct_CXX=no
+      hardcode_automatic_CXX=yes
+      hardcode_shlibpath_var_CXX=unsupported
+      whole_archive_flag_spec_CXX=''
+      link_all_deplibs_CXX=yes
+
+    if test "$GXX" = yes ; then
+      lt_int_apple_cc_single_mod=no
+      output_verbose_link_cmd='echo'
+      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
+       lt_int_apple_cc_single_mod=yes
+      fi
+      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+       archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      else
+          archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+        fi
+        module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          else
+            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          fi
+            module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+          module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_CXX=no
+          ;;
+      esac
+      fi
+        ;;
+
+  dgux*)
+    case $cc_basename in
+      ec++*)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      ghcx*)
+	# Green Hills C++ Compiler
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+  freebsd[12]*)
+    # C++ shared libraries reported to be fairly broken before switch to ELF
+    ld_shlibs_CXX=no
+    ;;
+  freebsd-elf*)
+    archive_cmds_need_lc_CXX=no
+    ;;
+  freebsd* | kfreebsd*-gnu | dragonfly*)
+    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+    # conventions
+    ld_shlibs_CXX=yes
+    ;;
+  gnu*)
+    ;;
+  hpux9*)
+    hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+    hardcode_libdir_separator_CXX=:
+    export_dynamic_flag_spec_CXX='${wl}-E'
+    hardcode_direct_CXX=yes
+    hardcode_minus_L_CXX=yes # Not in the search PATH,
+				# but as the default
+				# location of the library.
+
+    case $cc_basename in
+    CC*)
+      # FIXME: insert proper C++ library support
+      ld_shlibs_CXX=no
+      ;;
+    aCC*)
+      archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      #
+      # There doesn't appear to be a way to prevent this compiler from
+      # explicitly linking system object files so we need to strip them
+      # from the output so that they don't get included in the library
+      # dependencies.
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      ;;
+    *)
+      if test "$GXX" = yes; then
+        archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+      fi
+      ;;
+    esac
+    ;;
+  hpux10*|hpux11*)
+    if test $with_gnu_ld = no; then
+      hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_CXX=:
+
+      case $host_cpu in
+      hppa*64*|ia64*)
+	hardcode_libdir_flag_spec_ld_CXX='+b $libdir'
+        ;;
+      *)
+	export_dynamic_flag_spec_CXX='${wl}-E'
+        ;;
+      esac
+    fi
+    case $host_cpu in
+    hppa*64*|ia64*)
+      hardcode_direct_CXX=no
+      hardcode_shlibpath_var_CXX=no
+      ;;
+    *)
+      hardcode_direct_CXX=yes
+      hardcode_minus_L_CXX=yes # Not in the search PATH,
+					      # but as the default
+					      # location of the library.
+      ;;
+    esac
+
+    case $cc_basename in
+      CC*)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      aCC*)
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	esac
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes; then
+	  if test $with_gnu_ld = no; then
+	    case $host_cpu in
+	    hppa*64*)
+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    ia64*)
+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    *)
+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    esac
+	  fi
+	else
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	fi
+	;;
+    esac
+    ;;
+  interix3*)
+    hardcode_direct_CXX=no
+    hardcode_shlibpath_var_CXX=no
+    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+    export_dynamic_flag_spec_CXX='${wl}-E'
+    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+    # Instead, shared libraries are loaded at an image base (0x10000000 by
+    # default) and relocated if they conflict, which is a slow very memory
+    # consuming and fragmenting process.  To avoid this, we pick a random,
+    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+    archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    ;;
+  irix5* | irix6*)
+    case $cc_basename in
+      CC*)
+	# SGI C++
+	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	# Archives containing C++ object files must be created using
+	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	;;
+      *)
+	if test "$GXX" = yes; then
+	  if test "$with_gnu_ld" = no; then
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	  else
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+	  fi
+	fi
+	link_all_deplibs_CXX=yes
+	;;
+    esac
+    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator_CXX=:
+    ;;
+  linux*)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+	hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+	;;
+      icpc*)
+	# Intel C++
+	with_gnu_ld=yes
+	# version 8.0 and above of icpc choke on multiply defined symbols
+	# if we add $predep_objects and $postdep_objects, however 7.1 and
+	# earlier do not add the objects themselves.
+	case `$CC -V 2>&1` in
+	*"Version 7."*)
+  	  archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  	  archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	*)  # Version 8.0 or newer
+	  tmp_idyn=
+	  case $host_cpu in
+	    ia64*) tmp_idyn=' -i_dynamic';;
+	  esac
+  	  archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	esac
+	archive_cmds_need_lc_CXX=no
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	;;
+      pgCC*)
+        # Portland Group C++ compiler
+	archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+  	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        ;;
+      cxx*)
+	# Compaq C++
+	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	runpath_var=LD_RUN_PATH
+	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+    esac
+    ;;
+  lynxos*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  m88k*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  mvs*)
+    case $cc_basename in
+      cxx*)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+  netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+      wlarc=
+      hardcode_libdir_flag_spec_CXX='-R$libdir'
+      hardcode_direct_CXX=yes
+      hardcode_shlibpath_var_CXX=no
+    fi
+    # Workaround some broken pre-1.5 toolchains
+    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+    ;;
+  openbsd2*)
+    # C++ shared libraries are fairly broken
+    ld_shlibs_CXX=no
+    ;;
+  openbsd*)
+    hardcode_direct_CXX=yes
+    hardcode_shlibpath_var_CXX=no
+    archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+      export_dynamic_flag_spec_CXX='${wl}-E'
+      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    fi
+    output_verbose_link_cmd='echo'
+    ;;
+  osf3*)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+
+	;;
+      RCC*)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      cxx*)
+	allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	  hardcode_libdir_separator_CXX=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+	else
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	fi
+	;;
+    esac
+    ;;
+  osf4* | osf5*)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Archives containing C++ object files must be created using
+	# the KAI C++ compiler.
+	old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
+	;;
+      RCC*)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      cxx*)
+	allow_undefined_flag_CXX=' -expect_unresolved \*'
+	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	  echo "-hidden">> $lib.exp~
+	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
+	  $rm $lib.exp'
+
+	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	  hardcode_libdir_separator_CXX=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+	else
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	fi
+	;;
+    esac
+    ;;
+  psos*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  sunos4*)
+    case $cc_basename in
+      CC*)
+	# Sun C++ 4.x
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      lcc*)
+	# Lucid
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+  solaris*)
+    case $cc_basename in
+      CC*)
+	# Sun C++ 4.2, 5.x and Centerline C++
+        archive_cmds_need_lc_CXX=yes
+	no_undefined_flag_CXX=' -zdefs'
+	archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	hardcode_libdir_flag_spec_CXX='-R$libdir'
+	hardcode_shlibpath_var_CXX=no
+	case $host_os in
+	  solaris2.[0-5] | solaris2.[0-5].*) ;;
+	  *)
+	    # The C++ compiler is used as linker so we must use $wl
+	    # flag to pass the commands to the underlying system
+	    # linker. We must also pass each convience library through
+	    # to the system linker between allextract/defaultextract.
+	    # The C++ compiler will combine linker options so we
+	    # cannot just pass the convience library names through
+	    # without $wl.
+	    # Supported since Solaris 2.6 (maybe 2.5.1?)
+	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
+	    ;;
+	esac
+	link_all_deplibs_CXX=yes
+
+	output_verbose_link_cmd='echo'
+
+	# Archives containing C++ object files must be created using
+	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	;;
+      gcx*)
+	# Green Hills C++ Compiler
+	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	# The C++ compiler must be used to create the archive.
+	old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	;;
+      *)
+	# GNU C++ compiler with Solaris linker
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+	  if $CC --version | grep -v '^2\.7' > /dev/null; then
+	    archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  else
+	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	    # platform.
+	    archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  fi
+
+	  hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+	fi
+	;;
+    esac
+    ;;
+  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+    no_undefined_flag_CXX='${wl}-z,text'
+    archive_cmds_need_lc_CXX=no
+    hardcode_shlibpath_var_CXX=no
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
+    ;;
+  sysv5* | sco3.2v5* | sco5v6*)
+    # Note: We can NOT use -z defs as we might desire, because we do not
+    # link with -lc, and that would cause any symbols used from libc to
+    # always be unresolved, which means just about no library would
+    # ever link correctly.  If we're not using GNU ld we use -z text
+    # though, which does catch some bad symbols but isn't as heavy-handed
+    # as -z defs.
+    # For security reasons, it is highly recommended that you always
+    # use absolute paths for naming shared libraries, and exclude the
+    # DT_RUNPATH tag from executables and libraries.  But doing so
+    # requires that you compile everything twice, which is a pain.
+    # So that behaviour is only enabled if SCOABSPATH is set to a
+    # non-empty value in the environment.  Most likely only useful for
+    # creating official distributions of packages.
+    # This is a hack until libtool officially supports absolute path
+    # names for shared libraries.
+    no_undefined_flag_CXX='${wl}-z,text'
+    allow_undefined_flag_CXX='${wl}-z,nodefs'
+    archive_cmds_need_lc_CXX=no
+    hardcode_shlibpath_var_CXX=no
+    hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+    hardcode_libdir_separator_CXX=':'
+    link_all_deplibs_CXX=yes
+    export_dynamic_flag_spec_CXX='${wl}-Bexport'
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
+    ;;
+  tandem*)
+    case $cc_basename in
+      NCC*)
+	# NonStop-UX NCC 3.20
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+  vxworks*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  *)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+esac
+echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
+echo "${ECHO_T}$ld_shlibs_CXX" >&6
+test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+GCC_CXX="$GXX"
+LD_CXX="$LD"
+
+
+cat > conftest.$ac_ext <<EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+EOF
+
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  # The `*' in the case matches for architectures that use `case' in
+  # $output_verbose_cmd can trigger glob expansion during the loop
+  # eval without this substitution.
+  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
+
+  for p in `eval $output_verbose_link_cmd`; do
+    case $p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" \
+	  || test $p = "-R"; then
+	 prev=$p
+	 continue
+       else
+	 prev=
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$compiler_lib_search_path_CXX"; then
+	     compiler_lib_search_path_CXX="${prev}${p}"
+	   else
+	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$postdeps_CXX"; then
+	   postdeps_CXX="${prev}${p}"
+	 else
+	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+	 fi
+       fi
+       ;;
+
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$predep_objects_CXX"; then
+	   predep_objects_CXX="$p"
+	 else
+	   predep_objects_CXX="$predep_objects_CXX $p"
+	 fi
+       else
+	 if test -z "$postdep_objects_CXX"; then
+	   postdep_objects_CXX="$p"
+	 else
+	   postdep_objects_CXX="$postdep_objects_CXX $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling CXX test program"
+fi
+
+$rm -f confest.$objext
+
+# PORTME: override above test on systems where it is broken
+case $host_os in
+interix3*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  predep_objects_CXX=
+  postdep_objects_CXX=
+  postdeps_CXX=
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    postdeps_CXX='-lCstd -lCrun'
+    ;;
+  esac
+  ;;
+esac
+
+
+case " $postdeps_CXX " in
+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
+esac
+
+lt_prog_compiler_wl_CXX=
+lt_prog_compiler_pic_CXX=
+lt_prog_compiler_static_CXX=
+
+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    lt_prog_compiler_wl_CXX='-Wl,'
+    lt_prog_compiler_static_CXX='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_CXX='-Bstatic'
+      fi
+      ;;
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+      ;;
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | os2* | pw32*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_CXX='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      lt_prog_compiler_pic_CXX=
+      ;;
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_CXX=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	;;
+      *)
+	lt_prog_compiler_pic_CXX='-fPIC'
+	;;
+      esac
+      ;;
+    *)
+      lt_prog_compiler_pic_CXX='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix4* | aix5*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  lt_prog_compiler_static_CXX='-Bstatic'
+	else
+	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+       darwin*)
+         # PIC is the default on this platform
+         # Common symbols not allowed in MH_DYLIB files
+         case $cc_basename in
+           xlc*)
+           lt_prog_compiler_pic_CXX='-qnocommon'
+           lt_prog_compiler_wl_CXX='-Wl,'
+           ;;
+         esac
+       ;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | kfreebsd*-gnu | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      lt_prog_compiler_pic_CXX='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      lt_prog_compiler_pic_CXX='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux*)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    ;;
+	  icpc* | ecpc*)
+	    # Intel C++
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  pgCC*)
+	    # Portland Group C++ compiler.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fpic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    lt_prog_compiler_pic_CXX='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+	;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    lt_prog_compiler_wl_CXX='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    lt_prog_compiler_pic_CXX='-pic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	lt_prog_compiler_can_build_shared_CXX=no
+	;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_CXX"; then
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6
+if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_pic_works_CXX=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:11520: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:11524: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_prog_compiler_pic_works_CXX=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6
+
+if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then
+    case $lt_prog_compiler_pic_CXX in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
+     esac
+else
+    lt_prog_compiler_pic_CXX=
+     lt_prog_compiler_can_build_shared_CXX=no
+fi
+
+fi
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_CXX=
+    ;;
+  *)
+    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
+    ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works_CXX+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works_CXX=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_prog_compiler_static_works_CXX=yes
+       fi
+     else
+       lt_prog_compiler_static_works_CXX=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6
+
+if test x"$lt_prog_compiler_static_works_CXX" = xyes; then
+    :
+else
+    lt_prog_compiler_static_CXX=
+fi
+
+
+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_c_o_CXX=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:11624: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:11628: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
+  if test "$hard_links" = no; then
+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  case $host_os in
+  aix4* | aix5*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+    else
+      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    export_symbols_cmds_CXX="$ltdll_cmds"
+  ;;
+  cygwin* | mingw*)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  kfreebsd*-gnu)
+    link_all_deplibs_CXX=no
+  ;;
+  linux*)
+    link_all_deplibs_CXX=no
+  ;;
+  *)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  esac
+
+echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
+echo "${ECHO_T}$ld_shlibs_CXX" >&6
+test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_CXX" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_CXX=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_CXX in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+      $rm conftest*
+      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl_CXX
+	pic_flag=$lt_prog_compiler_pic_CXX
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+        allow_undefined_flag_CXX=
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+        then
+	  archive_cmds_need_lc_CXX=no
+        else
+	  archive_cmds_need_lc_CXX=yes
+        fi
+        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
+echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+  if test "$GCC" = yes; then
+    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+  else
+    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+  fi
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  freebsd*) # from 4.6 on
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+interix3*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
+knetbsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" || \
+   test -n "$runpath_var_CXX" || \
+   test "X$hardcode_automatic_CXX" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct_CXX" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
+     test "$hardcode_minus_L_CXX" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_CXX=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_CXX=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_CXX=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
+echo "${ECHO_T}$hardcode_action_CXX" >&6
+
+if test "$hardcode_action_CXX" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler_CXX \
+    CC_CXX \
+    LD_CXX \
+    lt_prog_compiler_wl_CXX \
+    lt_prog_compiler_pic_CXX \
+    lt_prog_compiler_static_CXX \
+    lt_prog_compiler_no_builtin_flag_CXX \
+    export_dynamic_flag_spec_CXX \
+    thread_safe_flag_spec_CXX \
+    whole_archive_flag_spec_CXX \
+    enable_shared_with_static_runtimes_CXX \
+    old_archive_cmds_CXX \
+    old_archive_from_new_cmds_CXX \
+    predep_objects_CXX \
+    postdep_objects_CXX \
+    predeps_CXX \
+    postdeps_CXX \
+    compiler_lib_search_path_CXX \
+    archive_cmds_CXX \
+    archive_expsym_cmds_CXX \
+    postinstall_cmds_CXX \
+    postuninstall_cmds_CXX \
+    old_archive_from_expsyms_cmds_CXX \
+    allow_undefined_flag_CXX \
+    no_undefined_flag_CXX \
+    export_symbols_cmds_CXX \
+    hardcode_libdir_flag_spec_CXX \
+    hardcode_libdir_flag_spec_ld_CXX \
+    hardcode_libdir_separator_CXX \
+    hardcode_automatic_CXX \
+    module_cmds_CXX \
+    module_expsym_cmds_CXX \
+    lt_cv_prog_compiler_c_o_CXX \
+    exclude_expsyms_CXX \
+    include_expsyms_CXX; do
+
+    case $var in
+    old_archive_cmds_CXX | \
+    old_archive_from_new_cmds_CXX | \
+    archive_cmds_CXX | \
+    archive_expsym_cmds_CXX | \
+    module_cmds_CXX | \
+    module_expsym_cmds_CXX | \
+    old_archive_from_expsyms_cmds_CXX | \
+    export_symbols_cmds_CXX | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+cfgfile="$ofile"
+
+  cat <<__EOF__ >> "$cfgfile"
+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_CXX
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_compiler_CXX
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC_CXX
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD_CXX
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_CXX
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_CXX
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds_CXX
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds_CXX
+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds_CXX
+module_expsym_cmds=$lt_module_expsym_cmds_CXX
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects_CXX
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects_CXX
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps_CXX
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps_CXX
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_CXX
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_CXX
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_CXX
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct_CXX
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L_CXX
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic_CXX
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_CXX
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path_CXX"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols_CXX
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_CXX
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_CXX
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_CXX
+
+# ### END LIBTOOL TAG CONFIG: $tagname
+
+__EOF__
+
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC=$lt_save_CC
+LDCXX=$LD
+LD=$lt_save_LD
+GCC=$lt_save_GCC
+with_gnu_ldcxx=$with_gnu_ld
+with_gnu_ld=$lt_save_with_gnu_ld
+lt_cv_path_LDCXX=$lt_cv_path_LD
+lt_cv_path_LD=$lt_save_path_LD
+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+
+	else
+	  tagname=""
+	fi
+	;;
+
+      F77)
+	if test -n "$F77" && test "X$F77" != "Xno"; then
+
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+
+
+archive_cmds_need_lc_F77=no
+allow_undefined_flag_F77=
+always_export_symbols_F77=no
+archive_expsym_cmds_F77=
+export_dynamic_flag_spec_F77=
+hardcode_direct_F77=no
+hardcode_libdir_flag_spec_F77=
+hardcode_libdir_flag_spec_ld_F77=
+hardcode_libdir_separator_F77=
+hardcode_minus_L_F77=no
+hardcode_automatic_F77=no
+module_cmds_F77=
+module_expsym_cmds_F77=
+link_all_deplibs_F77=unknown
+old_archive_cmds_F77=$old_archive_cmds
+no_undefined_flag_F77=
+whole_archive_flag_spec_F77=
+enable_shared_with_static_runtimes_F77=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+objext_F77=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="      program t\n      end\n"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${F77-"f77"}
+compiler=$CC
+compiler_F77=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $can_build_shared" >&5
+echo "${ECHO_T}$can_build_shared" >&6
+
+echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+aix4* | aix5*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+  ;;
+esac
+echo "$as_me:$LINENO: result: $enable_shared" >&5
+echo "${ECHO_T}$enable_shared" >&6
+
+echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+echo "$as_me:$LINENO: result: $enable_static" >&5
+echo "${ECHO_T}$enable_static" >&6
+
+GCC_F77="$G77"
+LD_F77="$LD"
+
+lt_prog_compiler_wl_F77=
+lt_prog_compiler_pic_F77=
+lt_prog_compiler_static_F77=
+
+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl_F77='-Wl,'
+    lt_prog_compiler_static_F77='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_F77='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
+      ;;
+
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_F77='-fno-common'
+      ;;
+
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared_F77=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_F77=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_F77='-fPIC'
+	;;
+      esac
+      ;;
+
+    *)
+      lt_prog_compiler_pic_F77='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_F77='-Bstatic'
+      else
+	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         lt_prog_compiler_pic_F77='-qnocommon'
+         lt_prog_compiler_wl_F77='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_F77='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static_F77='-non_shared'
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    linux*)
+      case $cc_basename in
+      icc* | ecc*)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-KPIC'
+	lt_prog_compiler_static_F77='-static'
+        ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-fpic'
+	lt_prog_compiler_static_F77='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl_F77='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static_F77='-non_shared'
+        ;;
+      esac
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static_F77='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl_F77='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl_F77='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl_F77='-Qoption ld '
+      lt_prog_compiler_pic_F77='-PIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic_F77='-Kconform_pic'
+	lt_prog_compiler_static_F77='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_can_build_shared_F77=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic_F77='-pic'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared_F77=no
+      ;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_F77"; then
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6
+if test "${lt_prog_compiler_pic_works_F77+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_pic_works_F77=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_F77"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:13212: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:13216: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_prog_compiler_pic_works_F77=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6
+
+if test x"$lt_prog_compiler_pic_works_F77" = xyes; then
+    case $lt_prog_compiler_pic_F77 in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
+     esac
+else
+    lt_prog_compiler_pic_F77=
+     lt_prog_compiler_can_build_shared_F77=no
+fi
+
+fi
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_F77=
+    ;;
+  *)
+    lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
+    ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works_F77+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works_F77=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_prog_compiler_static_works_F77=yes
+       fi
+     else
+       lt_prog_compiler_static_works_F77=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6
+
+if test x"$lt_prog_compiler_static_works_F77" = xyes; then
+    :
+else
+    lt_prog_compiler_static_F77=
+fi
+
+
+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_c_o_F77=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:13316: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:13320: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_F77=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
+  if test "$hard_links" = no; then
+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+  runpath_var=
+  allow_undefined_flag_F77=
+  enable_shared_with_static_runtimes_F77=no
+  archive_cmds_F77=
+  archive_expsym_cmds_F77=
+  old_archive_From_new_cmds_F77=
+  old_archive_from_expsyms_cmds_F77=
+  export_dynamic_flag_spec_F77=
+  whole_archive_flag_spec_F77=
+  thread_safe_flag_spec_F77=
+  hardcode_libdir_flag_spec_F77=
+  hardcode_libdir_flag_spec_ld_F77=
+  hardcode_libdir_separator_F77=
+  hardcode_direct_F77=no
+  hardcode_minus_L_F77=no
+  hardcode_shlibpath_var_F77=unsupported
+  link_all_deplibs_F77=unknown
+  hardcode_automatic_F77=no
+  module_cmds_F77=
+  module_expsym_cmds_F77=
+  always_export_symbols_F77=no
+  export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms_F77=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_"
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs_F77=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec_F77='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec_F77=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix3* | aix4* | aix5*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs_F77=no
+	cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_minus_L_F77=yes
+
+      # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      ld_shlibs_F77=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag_F77=unsupported
+	# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      allow_undefined_flag_F77=unsupported
+      always_export_symbols_F77=no
+      enable_shared_with_static_runtimes_F77=yes
+      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    interix3*)
+      hardcode_direct_F77=no
+      hardcode_shlibpath_var_F77=no
+      hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec_F77='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    linux*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+	link_all_deplibs_F77=no
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	ld_shlibs_F77=no
+	cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs_F77=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    ld_shlibs_F77=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs_F77" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec_F77=
+      export_dynamic_flag_spec_F77=
+      whole_archive_flag_spec_F77=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag_F77=unsupported
+      always_export_symbols_F77=yes
+      archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L_F77=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct_F77=unsupported
+      fi
+      ;;
+
+    aix4* | aix5*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	  for ld_flag in $LDFLAGS; do
+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+  	    aix_use_runtimelinking=yes
+  	    break
+  	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds_F77=''
+      hardcode_direct_F77=yes
+      hardcode_libdir_separator_F77=':'
+      link_all_deplibs_F77=yes
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+  	  # We have reworked collect2
+  	  hardcode_direct_F77=yes
+	  else
+  	  # We have old collect2
+  	  hardcode_direct_F77=unsupported
+  	  # It fails to find uninstalled libraries when the uninstalled
+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
+  	  # to unsupported forces relinking
+  	  hardcode_minus_L_F77=yes
+  	  hardcode_libdir_flag_spec_F77='-L$libdir'
+  	  hardcode_libdir_separator_F77=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+  	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols_F77=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag_F77='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       cat >conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_f77_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+       hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
+	archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag_F77="-z nodefs"
+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 cat >conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_f77_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+	 hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag_F77=' ${wl}-bernotok'
+	  allow_undefined_flag_F77=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  whole_archive_flag_spec_F77='$convenience'
+	  archive_cmds_need_lc_F77=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_minus_L_F77=yes
+      # see comment about different semantics on the GNU ld section
+      ld_shlibs_F77=no
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec_F77=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec_F77=' '
+      allow_undefined_flag_F77=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      old_archive_From_new_cmds_F77='true'
+      # FIXME: Should let the user specify the lib program.
+      old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
+      enable_shared_with_static_runtimes_F77=yes
+      ;;
+
+    darwin* | rhapsody*)
+      case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+      esac
+      archive_cmds_need_lc_F77=no
+      hardcode_direct_F77=no
+      hardcode_automatic_F77=yes
+      hardcode_shlibpath_var_F77=unsupported
+      whole_archive_flag_spec_F77=''
+      link_all_deplibs_F77=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+      archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_F77=no
+          ;;
+      esac
+    fi
+      ;;
+
+    dgux*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    freebsd1*)
+      ld_shlibs_F77=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_F77=yes
+      hardcode_minus_L_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    # GNU/kFreeBSD uses gcc -shared to do shared libraries.
+    kfreebsd*-gnu)
+      archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      link_all_deplibs_F77=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      hardcode_direct_F77=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L_F77=yes
+      export_dynamic_flag_spec_F77='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_F77=:
+
+	hardcode_direct_F77=yes
+	export_dynamic_flag_spec_F77='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L_F77=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_F77=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_libdir_flag_spec_ld_F77='+b $libdir'
+	  hardcode_direct_F77=no
+	  hardcode_shlibpath_var_F77=no
+	  ;;
+	*)
+	  hardcode_direct_F77=yes
+	  export_dynamic_flag_spec_F77='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L_F77=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
+      fi
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      link_all_deplibs_F77=yes
+      ;;
+
+    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    newsos6)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_F77=yes
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    openbsd*)
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec_F77='${wl}-E'
+      else
+       case $host_os in
+	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	   archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	   hardcode_libdir_flag_spec_F77='-R$libdir'
+	   ;;
+	 *)
+	   archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	   hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+	   ;;
+       esac
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_minus_L_F77=yes
+      allow_undefined_flag_F77=unsupported
+      archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag_F77=' -expect_unresolved \*'
+	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag_F77=' -expect_unresolved \*'
+	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec_F77='-rpath $libdir'
+      fi
+      hardcode_libdir_separator_F77=:
+      ;;
+
+    solaris*)
+      no_undefined_flag_F77=' -z text'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+	wlarc=''
+	archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_shlibpath_var_F77=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+ 	# The compiler driver will combine linker options so we
+ 	# cannot just pass the convience library names through
+ 	# without $wl, iff we do not link with $LD.
+ 	# Luckily, gcc supports the same syntax we need for Sun Studio.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+ 	case $wlarc in
+ 	'')
+ 	  whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;;
+ 	*)
+ 	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ 	esac ;;
+      esac
+      link_all_deplibs_F77=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_direct_F77=yes
+      hardcode_minus_L_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_F77=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds_F77='$CC -r -o $output$reload_objs'
+	  hardcode_direct_F77=no
+        ;;
+	motorola)
+	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var_F77=no
+      export_dynamic_flag_spec_F77='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var_F77=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs_F77=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
+      no_undefined_flag_F77='${wl}-z,text'
+      archive_cmds_need_lc_F77=no
+      hardcode_shlibpath_var_F77=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag_F77='${wl}-z,text'
+      allow_undefined_flag_F77='${wl}-z,nodefs'
+      archive_cmds_need_lc_F77=no
+      hardcode_shlibpath_var_F77=no
+      hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator_F77=':'
+      link_all_deplibs_F77=yes
+      export_dynamic_flag_spec_F77='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    *)
+      ld_shlibs_F77=no
+      ;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
+echo "${ECHO_T}$ld_shlibs_F77" >&6
+test "$ld_shlibs_F77" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_F77" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_F77=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_F77 in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+      $rm conftest*
+      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl_F77
+	pic_flag=$lt_prog_compiler_pic_F77
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag_F77
+        allow_undefined_flag_F77=
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+        then
+	  archive_cmds_need_lc_F77=no
+        else
+	  archive_cmds_need_lc_F77=yes
+        fi
+        allow_undefined_flag_F77=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
+echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+  if test "$GCC" = yes; then
+    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+  else
+    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+  fi
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  freebsd*) # from 4.6 on
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+interix3*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
+knetbsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action_F77=
+if test -n "$hardcode_libdir_flag_spec_F77" || \
+   test -n "$runpath_var_F77" || \
+   test "X$hardcode_automatic_F77" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct_F77" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
+     test "$hardcode_minus_L_F77" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_F77=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_F77=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_F77=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
+echo "${ECHO_T}$hardcode_action_F77" >&6
+
+if test "$hardcode_action_F77" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler_F77 \
+    CC_F77 \
+    LD_F77 \
+    lt_prog_compiler_wl_F77 \
+    lt_prog_compiler_pic_F77 \
+    lt_prog_compiler_static_F77 \
+    lt_prog_compiler_no_builtin_flag_F77 \
+    export_dynamic_flag_spec_F77 \
+    thread_safe_flag_spec_F77 \
+    whole_archive_flag_spec_F77 \
+    enable_shared_with_static_runtimes_F77 \
+    old_archive_cmds_F77 \
+    old_archive_from_new_cmds_F77 \
+    predep_objects_F77 \
+    postdep_objects_F77 \
+    predeps_F77 \
+    postdeps_F77 \
+    compiler_lib_search_path_F77 \
+    archive_cmds_F77 \
+    archive_expsym_cmds_F77 \
+    postinstall_cmds_F77 \
+    postuninstall_cmds_F77 \
+    old_archive_from_expsyms_cmds_F77 \
+    allow_undefined_flag_F77 \
+    no_undefined_flag_F77 \
+    export_symbols_cmds_F77 \
+    hardcode_libdir_flag_spec_F77 \
+    hardcode_libdir_flag_spec_ld_F77 \
+    hardcode_libdir_separator_F77 \
+    hardcode_automatic_F77 \
+    module_cmds_F77 \
+    module_expsym_cmds_F77 \
+    lt_cv_prog_compiler_c_o_F77 \
+    exclude_expsyms_F77 \
+    include_expsyms_F77; do
+
+    case $var in
+    old_archive_cmds_F77 | \
+    old_archive_from_new_cmds_F77 | \
+    archive_cmds_F77 | \
+    archive_expsym_cmds_F77 | \
+    module_cmds_F77 | \
+    module_expsym_cmds_F77 | \
+    old_archive_from_expsyms_cmds_F77 | \
+    export_symbols_cmds_F77 | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+cfgfile="$ofile"
+
+  cat <<__EOF__ >> "$cfgfile"
+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_F77
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_compiler_F77
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC_F77
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD_F77
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_F77
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_F77
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_F77
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds_F77
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds_F77
+archive_expsym_cmds=$lt_archive_expsym_cmds_F77
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds_F77
+module_expsym_cmds=$lt_module_expsym_cmds_F77
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects_F77
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects_F77
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps_F77
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps_F77
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_F77
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_F77
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_F77
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_F77
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct_F77
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L_F77
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic_F77
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_F77
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path_F77"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols_F77
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_F77
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_F77
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_F77
+
+# ### END LIBTOOL TAG CONFIG: $tagname
+
+__EOF__
+
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+	else
+	  tagname=""
+	fi
+	;;
+
+      GCJ)
+	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
+
+
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+objext_GCJ=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${GCJ-"gcj"}
+compiler=$CC
+compiler_GCJ=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+archive_cmds_need_lc_GCJ=no
+
+old_archive_cmds_GCJ=$old_archive_cmds
+
+
+lt_prog_compiler_no_builtin_flag_GCJ=
+
+if test "$GCC" = yes; then
+  lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
+
+
+echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:15539: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:15543: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+lt_prog_compiler_wl_GCJ=
+lt_prog_compiler_pic_GCJ=
+lt_prog_compiler_static_GCJ=
+
+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl_GCJ='-Wl,'
+    lt_prog_compiler_static_GCJ='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_GCJ='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
+      ;;
+
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_GCJ='-fno-common'
+      ;;
+
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared_GCJ=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_GCJ=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_GCJ='-fPIC'
+	;;
+      esac
+      ;;
+
+    *)
+      lt_prog_compiler_pic_GCJ='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_GCJ='-Bstatic'
+      else
+	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         lt_prog_compiler_pic_GCJ='-qnocommon'
+         lt_prog_compiler_wl_GCJ='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_GCJ='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static_GCJ='-non_shared'
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    linux*)
+      case $cc_basename in
+      icc* | ecc*)
+	lt_prog_compiler_wl_GCJ='-Wl,'
+	lt_prog_compiler_pic_GCJ='-KPIC'
+	lt_prog_compiler_static_GCJ='-static'
+        ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_GCJ='-Wl,'
+	lt_prog_compiler_pic_GCJ='-fpic'
+	lt_prog_compiler_static_GCJ='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl_GCJ='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static_GCJ='-non_shared'
+        ;;
+      esac
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static_GCJ='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl_GCJ='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl_GCJ='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl_GCJ='-Qoption ld '
+      lt_prog_compiler_pic_GCJ='-PIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic_GCJ='-Kconform_pic'
+	lt_prog_compiler_static_GCJ='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_can_build_shared_GCJ=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic_GCJ='-pic'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared_GCJ=no
+      ;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_GCJ"; then
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6
+if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_pic_works_GCJ=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:15807: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:15811: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_prog_compiler_pic_works_GCJ=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6
+
+if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then
+    case $lt_prog_compiler_pic_GCJ in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
+     esac
+else
+    lt_prog_compiler_pic_GCJ=
+     lt_prog_compiler_can_build_shared_GCJ=no
+fi
+
+fi
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_GCJ=
+    ;;
+  *)
+    lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
+    ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works_GCJ=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_prog_compiler_static_works_GCJ=yes
+       fi
+     else
+       lt_prog_compiler_static_works_GCJ=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6
+
+if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then
+    :
+else
+    lt_prog_compiler_static_GCJ=
+fi
+
+
+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_c_o_GCJ=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:15911: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:15915: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_GCJ=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
+  if test "$hard_links" = no; then
+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+  runpath_var=
+  allow_undefined_flag_GCJ=
+  enable_shared_with_static_runtimes_GCJ=no
+  archive_cmds_GCJ=
+  archive_expsym_cmds_GCJ=
+  old_archive_From_new_cmds_GCJ=
+  old_archive_from_expsyms_cmds_GCJ=
+  export_dynamic_flag_spec_GCJ=
+  whole_archive_flag_spec_GCJ=
+  thread_safe_flag_spec_GCJ=
+  hardcode_libdir_flag_spec_GCJ=
+  hardcode_libdir_flag_spec_ld_GCJ=
+  hardcode_libdir_separator_GCJ=
+  hardcode_direct_GCJ=no
+  hardcode_minus_L_GCJ=no
+  hardcode_shlibpath_var_GCJ=unsupported
+  link_all_deplibs_GCJ=unknown
+  hardcode_automatic_GCJ=no
+  module_cmds_GCJ=
+  module_expsym_cmds_GCJ=
+  always_export_symbols_GCJ=no
+  export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms_GCJ=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_"
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs_GCJ=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec_GCJ=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix3* | aix4* | aix5*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs_GCJ=no
+	cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_minus_L_GCJ=yes
+
+      # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      ld_shlibs_GCJ=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag_GCJ=unsupported
+	# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      allow_undefined_flag_GCJ=unsupported
+      always_export_symbols_GCJ=no
+      enable_shared_with_static_runtimes_GCJ=yes
+      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    interix3*)
+      hardcode_direct_GCJ=no
+      hardcode_shlibpath_var_GCJ=no
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec_GCJ='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    linux*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+	link_all_deplibs_GCJ=no
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	ld_shlibs_GCJ=no
+	cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs_GCJ=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    ld_shlibs_GCJ=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs_GCJ" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec_GCJ=
+      export_dynamic_flag_spec_GCJ=
+      whole_archive_flag_spec_GCJ=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag_GCJ=unsupported
+      always_export_symbols_GCJ=yes
+      archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L_GCJ=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct_GCJ=unsupported
+      fi
+      ;;
+
+    aix4* | aix5*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	  for ld_flag in $LDFLAGS; do
+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+  	    aix_use_runtimelinking=yes
+  	    break
+  	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds_GCJ=''
+      hardcode_direct_GCJ=yes
+      hardcode_libdir_separator_GCJ=':'
+      link_all_deplibs_GCJ=yes
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+  	  # We have reworked collect2
+  	  hardcode_direct_GCJ=yes
+	  else
+  	  # We have old collect2
+  	  hardcode_direct_GCJ=unsupported
+  	  # It fails to find uninstalled libraries when the uninstalled
+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
+  	  # to unsupported forces relinking
+  	  hardcode_minus_L_GCJ=yes
+  	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
+  	  hardcode_libdir_separator_GCJ=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+  	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols_GCJ=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag_GCJ='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+       hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
+	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag_GCJ="-z nodefs"
+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+	 hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag_GCJ=' ${wl}-bernotok'
+	  allow_undefined_flag_GCJ=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  whole_archive_flag_spec_GCJ='$convenience'
+	  archive_cmds_need_lc_GCJ=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_minus_L_GCJ=yes
+      # see comment about different semantics on the GNU ld section
+      ld_shlibs_GCJ=no
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec_GCJ=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec_GCJ=' '
+      allow_undefined_flag_GCJ=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      old_archive_From_new_cmds_GCJ='true'
+      # FIXME: Should let the user specify the lib program.
+      old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
+      enable_shared_with_static_runtimes_GCJ=yes
+      ;;
+
+    darwin* | rhapsody*)
+      case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+      esac
+      archive_cmds_need_lc_GCJ=no
+      hardcode_direct_GCJ=no
+      hardcode_automatic_GCJ=yes
+      hardcode_shlibpath_var_GCJ=unsupported
+      whole_archive_flag_spec_GCJ=''
+      link_all_deplibs_GCJ=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+      archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_GCJ=no
+          ;;
+      esac
+    fi
+      ;;
+
+    dgux*)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    freebsd1*)
+      ld_shlibs_GCJ=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_GCJ=yes
+      hardcode_minus_L_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    # GNU/kFreeBSD uses gcc -shared to do shared libraries.
+    kfreebsd*-gnu)
+      archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      link_all_deplibs_GCJ=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      hardcode_direct_GCJ=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L_GCJ=yes
+      export_dynamic_flag_spec_GCJ='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_GCJ=:
+
+	hardcode_direct_GCJ=yes
+	export_dynamic_flag_spec_GCJ='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L_GCJ=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_GCJ=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
+	  hardcode_direct_GCJ=no
+	  hardcode_shlibpath_var_GCJ=no
+	  ;;
+	*)
+	  hardcode_direct_GCJ=yes
+	  export_dynamic_flag_spec_GCJ='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L_GCJ=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
+      fi
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      link_all_deplibs_GCJ=yes
+      ;;
+
+    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    newsos6)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_GCJ=yes
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    openbsd*)
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec_GCJ='${wl}-E'
+      else
+       case $host_os in
+	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	   archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	   hardcode_libdir_flag_spec_GCJ='-R$libdir'
+	   ;;
+	 *)
+	   archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	   hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+	   ;;
+       esac
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_minus_L_GCJ=yes
+      allow_undefined_flag_GCJ=unsupported
+      archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag_GCJ=' -expect_unresolved \*'
+	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag_GCJ=' -expect_unresolved \*'
+	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
+      fi
+      hardcode_libdir_separator_GCJ=:
+      ;;
+
+    solaris*)
+      no_undefined_flag_GCJ=' -z text'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+	wlarc=''
+	archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_shlibpath_var_GCJ=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+ 	# The compiler driver will combine linker options so we
+ 	# cannot just pass the convience library names through
+ 	# without $wl, iff we do not link with $LD.
+ 	# Luckily, gcc supports the same syntax we need for Sun Studio.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+ 	case $wlarc in
+ 	'')
+ 	  whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;;
+ 	*)
+ 	  whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ 	esac ;;
+      esac
+      link_all_deplibs_GCJ=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_minus_L_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_GCJ=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds_GCJ='$CC -r -o $output$reload_objs'
+	  hardcode_direct_GCJ=no
+        ;;
+	motorola)
+	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var_GCJ=no
+      export_dynamic_flag_spec_GCJ='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var_GCJ=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs_GCJ=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
+      no_undefined_flag_GCJ='${wl}-z,text'
+      archive_cmds_need_lc_GCJ=no
+      hardcode_shlibpath_var_GCJ=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag_GCJ='${wl}-z,text'
+      allow_undefined_flag_GCJ='${wl}-z,nodefs'
+      archive_cmds_need_lc_GCJ=no
+      hardcode_shlibpath_var_GCJ=no
+      hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator_GCJ=':'
+      link_all_deplibs_GCJ=yes
+      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    *)
+      ld_shlibs_GCJ=no
+      ;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
+echo "${ECHO_T}$ld_shlibs_GCJ" >&6
+test "$ld_shlibs_GCJ" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_GCJ" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_GCJ=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_GCJ in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+      $rm conftest*
+      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl_GCJ
+	pic_flag=$lt_prog_compiler_pic_GCJ
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
+        allow_undefined_flag_GCJ=
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+        then
+	  archive_cmds_need_lc_GCJ=no
+        else
+	  archive_cmds_need_lc_GCJ=yes
+        fi
+        allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
+echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+  if test "$GCC" = yes; then
+    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+  else
+    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+  fi
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  freebsd*) # from 4.6 on
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+interix3*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
+knetbsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action_GCJ=
+if test -n "$hardcode_libdir_flag_spec_GCJ" || \
+   test -n "$runpath_var_GCJ" || \
+   test "X$hardcode_automatic_GCJ" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct_GCJ" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
+     test "$hardcode_minus_L_GCJ" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_GCJ=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_GCJ=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_GCJ=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
+echo "${ECHO_T}$hardcode_action_GCJ" >&6
+
+if test "$hardcode_action_GCJ" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler_GCJ \
+    CC_GCJ \
+    LD_GCJ \
+    lt_prog_compiler_wl_GCJ \
+    lt_prog_compiler_pic_GCJ \
+    lt_prog_compiler_static_GCJ \
+    lt_prog_compiler_no_builtin_flag_GCJ \
+    export_dynamic_flag_spec_GCJ \
+    thread_safe_flag_spec_GCJ \
+    whole_archive_flag_spec_GCJ \
+    enable_shared_with_static_runtimes_GCJ \
+    old_archive_cmds_GCJ \
+    old_archive_from_new_cmds_GCJ \
+    predep_objects_GCJ \
+    postdep_objects_GCJ \
+    predeps_GCJ \
+    postdeps_GCJ \
+    compiler_lib_search_path_GCJ \
+    archive_cmds_GCJ \
+    archive_expsym_cmds_GCJ \
+    postinstall_cmds_GCJ \
+    postuninstall_cmds_GCJ \
+    old_archive_from_expsyms_cmds_GCJ \
+    allow_undefined_flag_GCJ \
+    no_undefined_flag_GCJ \
+    export_symbols_cmds_GCJ \
+    hardcode_libdir_flag_spec_GCJ \
+    hardcode_libdir_flag_spec_ld_GCJ \
+    hardcode_libdir_separator_GCJ \
+    hardcode_automatic_GCJ \
+    module_cmds_GCJ \
+    module_expsym_cmds_GCJ \
+    lt_cv_prog_compiler_c_o_GCJ \
+    exclude_expsyms_GCJ \
+    include_expsyms_GCJ; do
+
+    case $var in
+    old_archive_cmds_GCJ | \
+    old_archive_from_new_cmds_GCJ | \
+    archive_cmds_GCJ | \
+    archive_expsym_cmds_GCJ | \
+    module_cmds_GCJ | \
+    module_expsym_cmds_GCJ | \
+    old_archive_from_expsyms_cmds_GCJ | \
+    export_symbols_cmds_GCJ | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+cfgfile="$ofile"
+
+  cat <<__EOF__ >> "$cfgfile"
+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_GCJ
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_compiler_GCJ
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC_GCJ
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD_GCJ
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_GCJ
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_GCJ
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_GCJ
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds_GCJ
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds_GCJ
+archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds_GCJ
+module_expsym_cmds=$lt_module_expsym_cmds_GCJ
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects_GCJ
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects_GCJ
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps_GCJ
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps_GCJ
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_GCJ
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_GCJ
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_GCJ
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct_GCJ
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L_GCJ
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic_GCJ
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_GCJ
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path_GCJ"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols_GCJ
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_GCJ
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_GCJ
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_GCJ
+
+# ### END LIBTOOL TAG CONFIG: $tagname
+
+__EOF__
+
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+	else
+	  tagname=""
+	fi
+	;;
+
+      RC)
+
+
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+objext_RC=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${RC-"windres"}
+compiler=$CC
+compiler_RC=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+lt_cv_prog_compiler_c_o_RC=yes
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler_RC \
+    CC_RC \
+    LD_RC \
+    lt_prog_compiler_wl_RC \
+    lt_prog_compiler_pic_RC \
+    lt_prog_compiler_static_RC \
+    lt_prog_compiler_no_builtin_flag_RC \
+    export_dynamic_flag_spec_RC \
+    thread_safe_flag_spec_RC \
+    whole_archive_flag_spec_RC \
+    enable_shared_with_static_runtimes_RC \
+    old_archive_cmds_RC \
+    old_archive_from_new_cmds_RC \
+    predep_objects_RC \
+    postdep_objects_RC \
+    predeps_RC \
+    postdeps_RC \
+    compiler_lib_search_path_RC \
+    archive_cmds_RC \
+    archive_expsym_cmds_RC \
+    postinstall_cmds_RC \
+    postuninstall_cmds_RC \
+    old_archive_from_expsyms_cmds_RC \
+    allow_undefined_flag_RC \
+    no_undefined_flag_RC \
+    export_symbols_cmds_RC \
+    hardcode_libdir_flag_spec_RC \
+    hardcode_libdir_flag_spec_ld_RC \
+    hardcode_libdir_separator_RC \
+    hardcode_automatic_RC \
+    module_cmds_RC \
+    module_expsym_cmds_RC \
+    lt_cv_prog_compiler_c_o_RC \
+    exclude_expsyms_RC \
+    include_expsyms_RC; do
+
+    case $var in
+    old_archive_cmds_RC | \
+    old_archive_from_new_cmds_RC | \
+    archive_cmds_RC | \
+    archive_expsym_cmds_RC | \
+    module_cmds_RC | \
+    module_expsym_cmds_RC | \
+    old_archive_from_expsyms_cmds_RC | \
+    export_symbols_cmds_RC | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+cfgfile="$ofile"
+
+  cat <<__EOF__ >> "$cfgfile"
+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_RC
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_compiler_RC
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC_RC
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD_RC
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_RC
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_RC
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_RC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds_RC
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds_RC
+archive_expsym_cmds=$lt_archive_expsym_cmds_RC
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds_RC
+module_expsym_cmds=$lt_module_expsym_cmds_RC
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects_RC
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects_RC
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps_RC
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps_RC
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_RC
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_RC
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_RC
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_RC
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct_RC
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L_RC
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic_RC
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_RC
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path_RC"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols_RC
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_RC
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_RC
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_RC
+
+# ### END LIBTOOL TAG CONFIG: $tagname
+
+__EOF__
+
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+	;;
+
+      *)
+	{ { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
+echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
+   { (exit 1); exit 1; }; }
+	;;
+      esac
+
+      # Append the new tag name to the list of available tags.
+      if test -n "$tagname" ; then
+      available_tags="$available_tags $tagname"
+    fi
+    fi
+  done
+  IFS="$lt_save_ifs"
+
+  # Now substitute the updated list of available tags.
+  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
+    mv "${ofile}T" "$ofile"
+    chmod +x "$ofile"
+  else
+    rm -f "${ofile}T"
+    { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
+echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+fi
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+# Prevent multiple expansion
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5
+echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6
+if test "${ac_cv_c_bigendian+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # See if sys/param.h defines the BYTE_ORDER macro.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/param.h>
+
+int
+main ()
+{
+#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
+ bogus endian macros
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  # It does; now see whether it defined to BIG_ENDIAN or not.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/param.h>
+
+int
+main ()
+{
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_c_bigendian=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_c_bigendian=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+# It does not; compile a test program.
+if test "$cross_compiling" = yes; then
+  # try to guess the endianness by grepping values into an object file
+  ac_cv_c_bigendian=unknown
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; }
+short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; }
+int
+main ()
+{
+ _ascii (); _ebcdic ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then
+  ac_cv_c_bigendian=yes
+fi
+if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
+  if test "$ac_cv_c_bigendian" = unknown; then
+    ac_cv_c_bigendian=no
+  else
+    # finding both strings is unlikely to happen, but who knows?
+    ac_cv_c_bigendian=unknown
+  fi
+fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+int
+main ()
+{
+  /* Are we little or big endian?  From Harbison&Steele.  */
+  union
+  {
+    long l;
+    char c[sizeof (long)];
+  } u;
+  u.l = 1;
+  exit (u.c[sizeof (long) - 1] == 1);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_c_bigendian=no
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_c_bigendian=yes
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
+echo "${ECHO_T}$ac_cv_c_bigendian" >&6
+case $ac_cv_c_bigendian in
+  yes)
+
+cat >>confdefs.h <<\_ACEOF
+#define WORDS_BIGENDIAN 1
+_ACEOF
+ ;;
+  no)
+     ;;
+  *)
+    { { echo "$as_me:$LINENO: error: unknown endianness
+presetting ac_cv_c_bigendian=no (or yes) will help" >&5
+echo "$as_me: error: unknown endianness
+presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
+   { (exit 1); exit 1; }; } ;;
+esac
+
+echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
+echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
+if test "${ac_cv_c_const+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+/* FIXME: Include the comments suggested by Paul. */
+#ifndef __cplusplus
+  /* Ultrix mips cc rejects this.  */
+  typedef int charset[2];
+  const charset x;
+  /* SunOS 4.1.1 cc rejects this.  */
+  char const *const *ccp;
+  char **p;
+  /* NEC SVR4.0.2 mips cc rejects this.  */
+  struct point {int x, y;};
+  static struct point const zero = {0,0};
+  /* AIX XL C 1.02.0.0 rejects this.
+     It does not let you subtract one const X* pointer from another in
+     an arm of an if-expression whose if-part is not a constant
+     expression */
+  const char *g = "string";
+  ccp = &g + (g ? g-g : 0);
+  /* HPUX 7.0 cc rejects these. */
+  ++ccp;
+  p = (char**) ccp;
+  ccp = (char const *const *) p;
+  { /* SCO 3.2v4 cc rejects this.  */
+    char *t;
+    char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+    *t++ = 0;
+  }
+  { /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
+    int x[] = {25, 17};
+    const int *foo = &x[0];
+    ++foo;
+  }
+  { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+    typedef const int *iptr;
+    iptr p = 0;
+    ++p;
+  }
+  { /* AIX XL C 1.02.0.0 rejects this saying
+       "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+    struct s { int j; const int *ap[3]; };
+    struct s *b; b->j = 5;
+  }
+  { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+    const int foo = 10;
+  }
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_c_const=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_c_const=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
+echo "${ECHO_T}$ac_cv_c_const" >&6
+if test $ac_cv_c_const = no; then
+
+cat >>confdefs.h <<\_ACEOF
+#define const
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking for inline" >&5
+echo $ECHO_N "checking for inline... $ECHO_C" >&6
+if test "${ac_cv_c_inline+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifndef __cplusplus
+typedef int foo_t;
+static $ac_kw foo_t static_foo () {return 0; }
+$ac_kw foo_t foo () {return 0; }
+#endif
+
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_c_inline=$ac_kw; break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5
+echo "${ECHO_T}$ac_cv_c_inline" >&6
+
+
+case $ac_cv_c_inline in
+  inline | yes) ;;
+  *)
+    case $ac_cv_c_inline in
+      no) ac_val=;;
+      *) ac_val=$ac_cv_c_inline;;
+    esac
+    cat >>confdefs.h <<_ACEOF
+#ifndef __cplusplus
+#define inline $ac_val
+#endif
+_ACEOF
+    ;;
+esac
+
+echo "$as_me:$LINENO: checking for C/C++ restrict keyword" >&5
+echo $ECHO_N "checking for C/C++ restrict keyword... $ECHO_C" >&6
+if test "${ac_cv_c_restrict+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_c_restrict=no
+   # Try the official restrict keyword, then gcc's __restrict, and
+   # the less common variants.
+   for ac_kw in restrict __restrict __restrict__ _Restrict; do
+     cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+float * $ac_kw x;
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_c_restrict=$ac_kw; break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+   done
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_restrict" >&5
+echo "${ECHO_T}$ac_cv_c_restrict" >&6
+ case $ac_cv_c_restrict in
+   restrict) ;;
+   no)
+cat >>confdefs.h <<\_ACEOF
+#define restrict
+_ACEOF
+ ;;
+   *)  cat >>confdefs.h <<_ACEOF
+#define restrict $ac_cv_c_restrict
+_ACEOF
+ ;;
+ esac
+
+
+
+echo "$as_me:$LINENO: checking for C99 variable-size arrays" >&5
+echo $ECHO_N "checking for C99 variable-size arrays... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+int foo=10;
+int array[foo];
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  has_var_arrays=yes;
+cat >>confdefs.h <<\_ACEOF
+#define VAR_ARRAYS
+_ACEOF
+
+
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+has_var_arrays=no
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $has_var_arrays" >&5
+echo "${ECHO_T}$has_var_arrays" >&6
+
+echo "$as_me:$LINENO: checking for alloca" >&5
+echo $ECHO_N "checking for alloca... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <alloca.h>
+int
+main ()
+{
+
+int foo=10;
+int *array = alloca(foo);
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+has_alloca=yes;
+if test x$has_var_arrays = "xno" ; then
+
+cat >>confdefs.h <<\_ACEOF
+#define USE_ALLOCA
+_ACEOF
+
+fi
+
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+has_alloca=no
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $has_alloca" >&5
+echo "${ECHO_T}$has_alloca" >&6
+
+
+
+
+for ac_header in sys/soundcard.h sys/audioio.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+  # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_header_compiler=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  ac_header_preproc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+  yes:no: )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+    ac_header_preproc=yes
+    ;;
+  no:yes:* )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------------ ##
+## Report this to the AC_PACKAGE_NAME lists.  ##
+## ------------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+# Check whether --with-ogg or --without-ogg was given.
+if test "${with_ogg+set}" = set; then
+  withval="$with_ogg"
+  ogg_prefix="$withval"
+else
+  ogg_prefix=""
+fi;
+
+# Check whether --with-ogg-libraries or --without-ogg-libraries was given.
+if test "${with_ogg_libraries+set}" = set; then
+  withval="$with_ogg_libraries"
+  ogg_libraries="$withval"
+else
+  ogg_libraries=""
+fi;
+
+# Check whether --with-ogg-includes or --without-ogg-includes was given.
+if test "${with_ogg_includes+set}" = set; then
+  withval="$with_ogg_includes"
+  ogg_includes="$withval"
+else
+  ogg_includes=""
+fi;
+# Check whether --enable-oggtest or --disable-oggtest was given.
+if test "${enable_oggtest+set}" = set; then
+  enableval="$enable_oggtest"
+
+else
+  enable_oggtest=yes
+fi;
+
+  if test "x$ogg_libraries" != "x" ; then
+    OGG_LIBS="-L$ogg_libraries"
+  elif test "x$ogg_prefix" != "x" ; then
+    OGG_LIBS="-L$ogg_prefix/lib"
+  elif test "x$prefix" != "xNONE" ; then
+    OGG_LIBS="-L$prefix/lib"
+  fi
+
+  OGG_LIBS="$OGG_LIBS -logg"
+
+  if test "x$ogg_includes" != "x" ; then
+    OGG_CFLAGS="-I$ogg_includes"
+  elif test "x$ogg_prefix" != "x" ; then
+    OGG_CFLAGS="-I$ogg_prefix/include"
+  elif test "x$prefix" != "xNONE"; then
+    OGG_CFLAGS="-I$prefix/include"
+  fi
+
+  echo "$as_me:$LINENO: checking for Ogg" >&5
+echo $ECHO_N "checking for Ogg... $ECHO_C" >&6
+  no_ogg=""
+
+
+  if test "x$enable_oggtest" = "xyes" ; then
+    ac_save_CFLAGS="$CFLAGS"
+    ac_save_LIBS="$LIBS"
+    CFLAGS="$CFLAGS $OGG_CFLAGS"
+    LIBS="$LIBS $OGG_LIBS"
+      rm -f conf.oggtest
+      if test "$cross_compiling" = yes; then
+  echo $ac_n "cross compiling; assumed OK... $ac_c"
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <ogg/ogg.h>
+
+int main ()
+{
+  system("touch conf.oggtest");
+  return 0;
+}
+
+
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+no_ogg=yes
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+  fi
+
+  if test "x$no_ogg" = "x" ; then
+     echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+     src="src"
+  else
+     echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+     if test -f conf.oggtest ; then
+       :
+     else
+       echo "*** Could not run Ogg test program, checking why..."
+       CFLAGS="$CFLAGS $OGG_CFLAGS"
+       LIBS="$LIBS $OGG_LIBS"
+       cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+#include <stdio.h>
+#include <ogg/ogg.h>
+
+int
+main ()
+{
+ return 0;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+   echo "*** The test program compiled, but did not run. This usually means"
+       echo "*** that the run-time linker is not finding Ogg or finding the wrong"
+       echo "*** version of Ogg. If it is not finding Ogg, you'll need to set your"
+       echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+       echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+       echo "*** is required on your system"
+       echo "***"
+       echo "*** If you have an old version installed, it is best to remove it, although"
+       echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ echo "*** The test program failed to compile or link. See the file config.log for the"
+       echo "*** exact error that occured. This usually means Ogg was incorrectly installed"
+       echo "*** or that you have moved Ogg since it was installed."
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+     OGG_CFLAGS=""
+     OGG_LIBS=""
+     src=""
+  fi
+
+
+  rm -f conf.oggtest
+
+
+
+
+echo "$as_me:$LINENO: checking for sin in -lm" >&5
+echo $ECHO_N "checking for sin in -lm... $ECHO_C" >&6
+if test "${ac_cv_lib_m_sin+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char sin ();
+int
+main ()
+{
+sin ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_m_sin=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_m_sin=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_m_sin" >&5
+echo "${ECHO_T}$ac_cv_lib_m_sin" >&6
+if test $ac_cv_lib_m_sin = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBM 1
+_ACEOF
+
+  LIBS="-lm $LIBS"
+
+fi
+
+
+# Check for getopt_long; if not found, use included source.
+
+for ac_func in getopt_long
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != $ac_func;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  eval "$as_ac_var=yes"
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+else
+  # FreeBSD has a gnugetopt library.
+  echo "$as_me:$LINENO: checking for getopt_long in -lgnugetopt" >&5
+echo $ECHO_N "checking for getopt_long in -lgnugetopt... $ECHO_C" >&6
+if test "${ac_cv_lib_gnugetopt_getopt_long+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lgnugetopt  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char getopt_long ();
+int
+main ()
+{
+getopt_long ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_gnugetopt_getopt_long=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_gnugetopt_getopt_long=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_gnugetopt_getopt_long" >&5
+echo "${ECHO_T}$ac_cv_lib_gnugetopt_getopt_long" >&6
+if test $ac_cv_lib_gnugetopt_getopt_long = yes; then
+  cat >>confdefs.h <<\_ACEOF
+#define HAVE_GETOPT_LONG 1
+_ACEOF
+
+else
+  # Use the GNU replacement.
+case $LIBOBJS in
+    "getopt.$ac_objext"   | \
+  *" getopt.$ac_objext"   | \
+    "getopt.$ac_objext "* | \
+  *" getopt.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS getopt.$ac_objext" ;;
+esac
+
+case $LIBOBJS in
+    "getopt1.$ac_objext"   | \
+  *" getopt1.$ac_objext"   | \
+    "getopt1.$ac_objext "* | \
+  *" getopt1.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS getopt1.$ac_objext" ;;
+esac
+
+fi
+
+fi
+done
+
+
+
+echo "$as_me:$LINENO: checking for main in -lwinmm" >&5
+echo $ECHO_N "checking for main in -lwinmm... $ECHO_C" >&6
+if test "${ac_cv_lib_winmm_main+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lwinmm  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+
+int
+main ()
+{
+main ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_winmm_main=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_winmm_main=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_winmm_main" >&5
+echo "${ECHO_T}$ac_cv_lib_winmm_main" >&6
+if test $ac_cv_lib_winmm_main = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBWINMM 1
+_ACEOF
+
+  LIBS="-lwinmm $LIBS"
+
+fi
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SPEEX_VERSION "${SPEEX_VERSION}"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define SPEEX_MAJOR_VERSION ${SPEEX_MAJOR_VERSION}
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define SPEEX_MINOR_VERSION ${SPEEX_MINOR_VERSION}
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define SPEEX_MICRO_VERSION ${SPEEX_MICRO_VERSION}
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define SPEEX_EXTRA_VERSION "${SPEEX_EXTRA_VERSION}"
+_ACEOF
+
+
+# Check whether --enable-wideband or --disable-wideband was given.
+if test "${enable_wideband+set}" = set; then
+  enableval="$enable_wideband"
+  if test "$enableval" = no; then
+
+cat >>confdefs.h <<\_ACEOF
+#define DISABLE_WIDEBAND
+_ACEOF
+
+fi
+fi;
+
+# Check whether --enable-vorbis-psy or --disable-vorbis-psy was given.
+if test "${enable_vorbis_psy+set}" = set; then
+  enableval="$enable_vorbis_psy"
+  if test "$enableval" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define VORBIS_PSYCHO
+_ACEOF
+
+fi
+fi;
+
+# Check whether --enable-valgrind or --disable-valgrind was given.
+if test "${enable_valgrind+set}" = set; then
+  enableval="$enable_valgrind"
+  if test "$enableval" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_VALGRIND
+_ACEOF
+
+fi
+fi;
+
+# Check whether --enable-sse or --disable-sse was given.
+if test "${enable_sse+set}" = set; then
+  enableval="$enable_sse"
+  if test "$enableval" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define _USE_SSE
+_ACEOF
+
+CFLAGS="$CFLAGS -O3 -msse"
+fi
+
+fi;
+
+# Check whether --enable-fixed-point or --disable-fixed-point was given.
+if test "${enable_fixed_point+set}" = set; then
+  enableval="$enable_fixed_point"
+  if test "$enableval" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define FIXED_POINT
+_ACEOF
+
+fi
+fi;
+
+# Check whether --enable-arm4-asm or --disable-arm4-asm was given.
+if test "${enable_arm4_asm+set}" = set; then
+  enableval="$enable_arm4_asm"
+  if test "$enableval" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define ARM4_ASM
+_ACEOF
+
+fi
+fi;
+
+# Check whether --enable-arm5e-asm or --disable-arm5e-asm was given.
+if test "${enable_arm5e_asm+set}" = set; then
+  enableval="$enable_arm5e_asm"
+  if test "$enableval" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define ARM5E_ASM
+_ACEOF
+
+fi
+fi;
+
+# Check whether --enable-blackfin-asm or --disable-blackfin-asm was given.
+if test "${enable_blackfin_asm+set}" = set; then
+  enableval="$enable_blackfin_asm"
+  if test "$enableval" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define BFIN_ASM
+_ACEOF
+
+  LDFLAGS="-Wl,-elf2flt=-s100000"
+fi
+fi;
+
+# Check whether --enable-fixed-point-debug or --disable-fixed-point-debug was given.
+if test "${enable_fixed_point_debug+set}" = set; then
+  enableval="$enable_fixed_point_debug"
+  if test "$enableval" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define FIXED_DEBUG
+_ACEOF
+
+fi
+fi;
+
+# Check whether --enable-epic-48k or --disable-epic-48k was given.
+if test "${enable_epic_48k+set}" = set; then
+  enableval="$enable_epic_48k"
+  if test "$enableval" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define EPIC_48K
+_ACEOF
+
+fi
+fi;
+
+# Check whether --enable-ti-c55x or --disable-ti-c55x was given.
+if test "${enable_ti_c55x+set}" = set; then
+  enableval="$enable_ti_c55x"
+  if test "$enableval" = yes; then
+  has_char16=yes;
+
+cat >>confdefs.h <<\_ACEOF
+#define TI_C55X
+_ACEOF
+
+fi
+fi;
+
+# Check whether --enable-16bit-precision or --disable-16bit-precision was given.
+if test "${enable_16bit_precision+set}" = set; then
+  enableval="$enable_16bit_precision"
+  if test "$enableval" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define PRECISION16
+_ACEOF
+
+fi
+fi;
+
+echo "$as_me:$LINENO: checking for short" >&5
+echo $ECHO_N "checking for short... $ECHO_C" >&6
+if test "${ac_cv_type_short+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+if ((short *) 0)
+  return 0;
+if (sizeof (short))
+  return 0;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_type_short=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_short=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_short" >&5
+echo "${ECHO_T}$ac_cv_type_short" >&6
+
+echo "$as_me:$LINENO: checking size of short" >&5
+echo $ECHO_N "checking size of short... $ECHO_C" >&6
+if test "${ac_cv_sizeof_short+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test "$ac_cv_type_short" = yes; then
+  # The cast to unsigned long works around a bug in the HP C Compiler
+  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+  # This bug is HP SR number 8606223364.
+  if test "$cross_compiling" = yes; then
+  # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (short))) >= 0)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_lo=0 ac_mid=0
+  while :; do
+    cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (short))) <= $ac_mid)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_hi=$ac_mid; break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+		    if test $ac_lo -le $ac_mid; then
+		      ac_lo= ac_hi=
+		      break
+		    fi
+		    ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (short))) < 0)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_hi=-1 ac_mid=-1
+  while :; do
+    cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (short))) >= $ac_mid)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_lo=$ac_mid; break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+		       if test $ac_mid -le $ac_hi; then
+			 ac_lo= ac_hi=
+			 break
+		       fi
+		       ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (short))) <= $ac_mid)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_hi=$ac_mid
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_short=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (short), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (short), 77
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; } ;;
+esac
+else
+  if test "$cross_compiling" = yes; then
+  { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
+   { (exit 1); exit 1; }; }
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+long longval () { return (long) (sizeof (short)); }
+unsigned long ulongval () { return (long) (sizeof (short)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+  FILE *f = fopen ("conftest.val", "w");
+  if (! f)
+    exit (1);
+  if (((long) (sizeof (short))) < 0)
+    {
+      long i = longval ();
+      if (i != ((long) (sizeof (short))))
+	exit (1);
+      fprintf (f, "%ld\n", i);
+    }
+  else
+    {
+      unsigned long i = ulongval ();
+      if (i != ((long) (sizeof (short))))
+	exit (1);
+      fprintf (f, "%lu\n", i);
+    }
+  exit (ferror (f) || fclose (f) != 0);
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_sizeof_short=`cat conftest.val`
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (short), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (short), 77
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+  ac_cv_sizeof_short=0
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_short" >&5
+echo "${ECHO_T}$ac_cv_sizeof_short" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_SHORT $ac_cv_sizeof_short
+_ACEOF
+
+
+echo "$as_me:$LINENO: checking for int" >&5
+echo $ECHO_N "checking for int... $ECHO_C" >&6
+if test "${ac_cv_type_int+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+if ((int *) 0)
+  return 0;
+if (sizeof (int))
+  return 0;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_type_int=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_int=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5
+echo "${ECHO_T}$ac_cv_type_int" >&6
+
+echo "$as_me:$LINENO: checking size of int" >&5
+echo $ECHO_N "checking size of int... $ECHO_C" >&6
+if test "${ac_cv_sizeof_int+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test "$ac_cv_type_int" = yes; then
+  # The cast to unsigned long works around a bug in the HP C Compiler
+  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+  # This bug is HP SR number 8606223364.
+  if test "$cross_compiling" = yes; then
+  # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) >= 0)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_lo=0 ac_mid=0
+  while :; do
+    cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_hi=$ac_mid; break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+		    if test $ac_lo -le $ac_mid; then
+		      ac_lo= ac_hi=
+		      break
+		    fi
+		    ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) < 0)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_hi=-1 ac_mid=-1
+  while :; do
+    cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) >= $ac_mid)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_lo=$ac_mid; break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+		       if test $ac_mid -le $ac_hi; then
+			 ac_lo= ac_hi=
+			 break
+		       fi
+		       ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_hi=$ac_mid
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_int=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (int), 77
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; } ;;
+esac
+else
+  if test "$cross_compiling" = yes; then
+  { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
+   { (exit 1); exit 1; }; }
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+long longval () { return (long) (sizeof (int)); }
+unsigned long ulongval () { return (long) (sizeof (int)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+  FILE *f = fopen ("conftest.val", "w");
+  if (! f)
+    exit (1);
+  if (((long) (sizeof (int))) < 0)
+    {
+      long i = longval ();
+      if (i != ((long) (sizeof (int))))
+	exit (1);
+      fprintf (f, "%ld\n", i);
+    }
+  else
+    {
+      unsigned long i = ulongval ();
+      if (i != ((long) (sizeof (int))))
+	exit (1);
+      fprintf (f, "%lu\n", i);
+    }
+  exit (ferror (f) || fclose (f) != 0);
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_sizeof_int=`cat conftest.val`
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (int), 77
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+  ac_cv_sizeof_int=0
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5
+echo "${ECHO_T}$ac_cv_sizeof_int" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_INT $ac_cv_sizeof_int
+_ACEOF
+
+
+echo "$as_me:$LINENO: checking for long" >&5
+echo $ECHO_N "checking for long... $ECHO_C" >&6
+if test "${ac_cv_type_long+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+if ((long *) 0)
+  return 0;
+if (sizeof (long))
+  return 0;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_type_long=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_long=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_long" >&5
+echo "${ECHO_T}$ac_cv_type_long" >&6
+
+echo "$as_me:$LINENO: checking size of long" >&5
+echo $ECHO_N "checking size of long... $ECHO_C" >&6
+if test "${ac_cv_sizeof_long+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test "$ac_cv_type_long" = yes; then
+  # The cast to unsigned long works around a bug in the HP C Compiler
+  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+  # This bug is HP SR number 8606223364.
+  if test "$cross_compiling" = yes; then
+  # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) >= 0)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_lo=0 ac_mid=0
+  while :; do
+    cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_hi=$ac_mid; break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+		    if test $ac_lo -le $ac_mid; then
+		      ac_lo= ac_hi=
+		      break
+		    fi
+		    ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) < 0)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_hi=-1 ac_mid=-1
+  while :; do
+    cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) >= $ac_mid)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_lo=$ac_mid; break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+		       if test $ac_mid -le $ac_hi; then
+			 ac_lo= ac_hi=
+			 break
+		       fi
+		       ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_hi=$ac_mid
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_long=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (long), 77
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; } ;;
+esac
+else
+  if test "$cross_compiling" = yes; then
+  { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
+   { (exit 1); exit 1; }; }
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+long longval () { return (long) (sizeof (long)); }
+unsigned long ulongval () { return (long) (sizeof (long)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+  FILE *f = fopen ("conftest.val", "w");
+  if (! f)
+    exit (1);
+  if (((long) (sizeof (long))) < 0)
+    {
+      long i = longval ();
+      if (i != ((long) (sizeof (long))))
+	exit (1);
+      fprintf (f, "%ld\n", i);
+    }
+  else
+    {
+      unsigned long i = ulongval ();
+      if (i != ((long) (sizeof (long))))
+	exit (1);
+      fprintf (f, "%lu\n", i);
+    }
+  exit (ferror (f) || fclose (f) != 0);
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_sizeof_long=`cat conftest.val`
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (long), 77
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+  ac_cv_sizeof_long=0
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_long" >&5
+echo "${ECHO_T}$ac_cv_sizeof_long" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_LONG $ac_cv_sizeof_long
+_ACEOF
+
+
+
+if test x$has_char16 = "xyes" ; then
+        case 1 in
+                $ac_cv_sizeof_short) SIZE16="short";;
+                $ac_cv_sizeof_int) SIZE16="int";;
+        esac
+else
+        case 2 in
+                $ac_cv_sizeof_short) SIZE16="short";;
+                $ac_cv_sizeof_int) SIZE16="int";;
+        esac
+fi
+
+if test x$has_char16 = "xyes" ; then
+        case 2 in
+                $ac_cv_sizeof_int) SIZE32="int";;
+                $ac_cv_sizeof_long) SIZE32="long";;
+                $ac_cv_sizeof_short) SIZE32="short";;
+        esac
+else
+        case 4 in
+                $ac_cv_sizeof_int) SIZE32="int";;
+                $ac_cv_sizeof_long) SIZE32="long";;
+                $ac_cv_sizeof_short) SIZE32="short";;
+        esac
+fi
+
+
+
+
+                                                                                                                                                                                                                                                                    ac_config_files="$ac_config_files Makefile libspeex/Makefile src/Makefile doc/Makefile Speex.spec include/Makefile include/speex/Makefile speex.pc win32/Makefile win32/libspeex/Makefile win32/speexenc/Makefile win32/speexdec/Makefile symbian/Makefile win32/VS2003/Makefile win32/VS2005/Makefile win32/VS2003/libspeex/Makefile win32/VS2003/speexdec/Makefile win32/VS2003/speexenc/Makefile win32/VS2005/libspeex/Makefile win32/VS2005/speexdec/Makefile win32/VS2005/speexenc/Makefile include/speex/speex_config_types.h ti/Makefile ti/speex_C54_test/Makefile ti/speex_C55_test/Makefile ti/speex_C64_test/Makefile"
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+  (set) 2>&1 |
+    case `(ac_space=' '; set | grep ac_space) 2>&1` in
+    *ac_space=\ *)
+      # `set' does not quote correctly, so add quotes (double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \).
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;;
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n \
+	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      ;;
+    esac;
+} |
+  sed '
+     t clear
+     : clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+  if test -w $cache_file; then
+    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+    cat confcache >$cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[	 ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[	 ]*$//;
+}'
+fi
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_i=`echo "$ac_i" |
+	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+  # 2. Add them.
+  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)$' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\/\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
+  # Find who we are.  Look in the path if we contain no path at all
+  # relative or not.
+  case $0 in
+    *[\\/]* ) as_myself=$0 ;;
+    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+       ;;
+  esac
+  # We did not find ourselves, most probably we were run as `sh COMMAND'
+  # in which case we are not to be found in the path.
+  if test "x$as_myself" = x; then
+    as_myself=$0
+  fi
+  if test ! -f "$as_myself"; then
+    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+  case $CONFIG_SHELL in
+  '')
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for as_base in sh bash ksh sh5; do
+	 case $as_dir in
+	 /*)
+	   if ("$as_dir/$as_base" -c '
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+	     CONFIG_SHELL=$as_dir/$as_base
+	     export CONFIG_SHELL
+	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+	   fi;;
+	 esac
+       done
+done
+;;
+  esac
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line before each line; the second 'sed' does the real
+  # work.  The second script uses 'N' to pair each line-number line
+  # with the numbered line, and appends trailing '-' during
+  # substitution so that $LINENO is not a special case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
+  sed '=' <$as_myself |
+    sed '
+      N
+      s,$,-,
+      : loop
+      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      t loop
+      s,-$,,
+      s,^['$as_cr_digits']*\n,,
+    ' >$as_me.lineno &&
+  chmod +x $as_me.lineno ||
+    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensible to this).
+  . ./$as_me.lineno
+  # Exit status is that of the last command.
+  exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+  *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T='	' ;;
+  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  # We could just check for DJGPP; but this test a) works b) is more generic
+  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+  if test -f conf$$.exe; then
+    # Don't use ln at all; we don't have any links
+    as_ln_s='cp -p'
+  else
+    as_ln_s='ln -s'
+  fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" 	$as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+exec 6>&1
+
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.  Logging --version etc. is OK.
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.59.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+_ACEOF
+
+# Files that config.status was made for.
+if test -n "$ac_config_files"; then
+  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_headers"; then
+  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_links"; then
+  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number, then exit
+  -q, --quiet      do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+  --file=FILE[:TEMPLATE]
+		   instantiate the configuration file FILE
+  --header=FILE[:TEMPLATE]
+		   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-autoconf at gnu.org>."
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.59,
+  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=$srcdir
+INSTALL="$INSTALL"
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value.  By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=*)
+    ac_option=`expr "x$1" : 'x\([^=]*\)='`
+    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  -*)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  *) # This is not an option, so the user has probably given explicit
+     # arguments.
+     ac_option=$1
+     ac_need_defaults=false;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --vers* | -V )
+    echo "$ac_cs_version"; exit 0 ;;
+  --he | --h)
+    # Conflict between --help and --header
+    { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; };;
+  --help | --hel | -h )
+    echo "$ac_cs_usage"; exit 0 ;;
+  --debug | --d* | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+    ac_need_defaults=false;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; } ;;
+
+  *) ac_config_targets="$ac_config_targets $1" ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+#
+# INIT-COMMANDS section.
+#
+
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_config_target in $ac_config_targets
+do
+  case "$ac_config_target" in
+  # Handling of arguments.
+  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+  "libspeex/Makefile" ) CONFIG_FILES="$CONFIG_FILES libspeex/Makefile" ;;
+  "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+  "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
+  "Speex.spec" ) CONFIG_FILES="$CONFIG_FILES Speex.spec" ;;
+  "include/Makefile" ) CONFIG_FILES="$CONFIG_FILES include/Makefile" ;;
+  "include/speex/Makefile" ) CONFIG_FILES="$CONFIG_FILES include/speex/Makefile" ;;
+  "speex.pc" ) CONFIG_FILES="$CONFIG_FILES speex.pc" ;;
+  "win32/Makefile" ) CONFIG_FILES="$CONFIG_FILES win32/Makefile" ;;
+  "win32/libspeex/Makefile" ) CONFIG_FILES="$CONFIG_FILES win32/libspeex/Makefile" ;;
+  "win32/speexenc/Makefile" ) CONFIG_FILES="$CONFIG_FILES win32/speexenc/Makefile" ;;
+  "win32/speexdec/Makefile" ) CONFIG_FILES="$CONFIG_FILES win32/speexdec/Makefile" ;;
+  "symbian/Makefile" ) CONFIG_FILES="$CONFIG_FILES symbian/Makefile" ;;
+  "win32/VS2003/Makefile" ) CONFIG_FILES="$CONFIG_FILES win32/VS2003/Makefile" ;;
+  "win32/VS2005/Makefile" ) CONFIG_FILES="$CONFIG_FILES win32/VS2005/Makefile" ;;
+  "win32/VS2003/libspeex/Makefile" ) CONFIG_FILES="$CONFIG_FILES win32/VS2003/libspeex/Makefile" ;;
+  "win32/VS2003/speexdec/Makefile" ) CONFIG_FILES="$CONFIG_FILES win32/VS2003/speexdec/Makefile" ;;
+  "win32/VS2003/speexenc/Makefile" ) CONFIG_FILES="$CONFIG_FILES win32/VS2003/speexenc/Makefile" ;;
+  "win32/VS2005/libspeex/Makefile" ) CONFIG_FILES="$CONFIG_FILES win32/VS2005/libspeex/Makefile" ;;
+  "win32/VS2005/speexdec/Makefile" ) CONFIG_FILES="$CONFIG_FILES win32/VS2005/speexdec/Makefile" ;;
+  "win32/VS2005/speexenc/Makefile" ) CONFIG_FILES="$CONFIG_FILES win32/VS2005/speexenc/Makefile" ;;
+  "include/speex/speex_config_types.h" ) CONFIG_FILES="$CONFIG_FILES include/speex/speex_config_types.h" ;;
+  "ti/Makefile" ) CONFIG_FILES="$CONFIG_FILES ti/Makefile" ;;
+  "ti/speex_C54_test/Makefile" ) CONFIG_FILES="$CONFIG_FILES ti/speex_C54_test/Makefile" ;;
+  "ti/speex_C55_test/Makefile" ) CONFIG_FILES="$CONFIG_FILES ti/speex_C55_test/Makefile" ;;
+  "ti/speex_C64_test/Makefile" ) CONFIG_FILES="$CONFIG_FILES ti/speex_C64_test/Makefile" ;;
+  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+  "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=./confstat$$-$RANDOM
+  (umask 077 && mkdir $tmp)
+} ||
+{
+   echo "$me: cannot create a temporary directory in ." >&2
+   { (exit 1); exit 1; }
+}
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "\$CONFIG_FILES"; then
+  # Protect against being on the right side of a sed subst in config.status.
+  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s, at SHELL@,$SHELL,;t t
+s, at PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s, at PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s, at PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s, at PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s, at PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s, at PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s, at exec_prefix@,$exec_prefix,;t t
+s, at prefix@,$prefix,;t t
+s, at program_transform_name@,$program_transform_name,;t t
+s, at bindir@,$bindir,;t t
+s, at sbindir@,$sbindir,;t t
+s, at libexecdir@,$libexecdir,;t t
+s, at datadir@,$datadir,;t t
+s, at sysconfdir@,$sysconfdir,;t t
+s, at sharedstatedir@,$sharedstatedir,;t t
+s, at localstatedir@,$localstatedir,;t t
+s, at libdir@,$libdir,;t t
+s, at includedir@,$includedir,;t t
+s, at oldincludedir@,$oldincludedir,;t t
+s, at infodir@,$infodir,;t t
+s, at mandir@,$mandir,;t t
+s, at build_alias@,$build_alias,;t t
+s, at host_alias@,$host_alias,;t t
+s, at target_alias@,$target_alias,;t t
+s, at DEFS@,$DEFS,;t t
+s, at ECHO_C@,$ECHO_C,;t t
+s, at ECHO_N@,$ECHO_N,;t t
+s, at ECHO_T@,$ECHO_T,;t t
+s, at LIBS@,$LIBS,;t t
+s, at SPEEX_LT_CURRENT@,$SPEEX_LT_CURRENT,;t t
+s, at SPEEX_LT_REVISION@,$SPEEX_LT_REVISION,;t t
+s, at SPEEX_LT_AGE@,$SPEEX_LT_AGE,;t t
+s, at SPEEX_VERSION@,$SPEEX_VERSION,;t t
+s, at INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s, at INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s, at INSTALL_DATA@,$INSTALL_DATA,;t t
+s, at CYGPATH_W@,$CYGPATH_W,;t t
+s, at PACKAGE@,$PACKAGE,;t t
+s, at VERSION@,$VERSION,;t t
+s, at ACLOCAL@,$ACLOCAL,;t t
+s, at AUTOCONF@,$AUTOCONF,;t t
+s, at AUTOMAKE@,$AUTOMAKE,;t t
+s, at AUTOHEADER@,$AUTOHEADER,;t t
+s, at MAKEINFO@,$MAKEINFO,;t t
+s, at AMTAR@,$AMTAR,;t t
+s, at install_sh@,$install_sh,;t t
+s, at STRIP@,$STRIP,;t t
+s, at ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s, at INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
+s, at mkdir_p@,$mkdir_p,;t t
+s, at AWK@,$AWK,;t t
+s, at SET_MAKE@,$SET_MAKE,;t t
+s, at am__leading_dot@,$am__leading_dot,;t t
+s, at MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
+s, at MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
+s, at MAINT@,$MAINT,;t t
+s, at build@,$build,;t t
+s, at build_cpu@,$build_cpu,;t t
+s, at build_vendor@,$build_vendor,;t t
+s, at build_os@,$build_os,;t t
+s, at host@,$host,;t t
+s, at host_cpu@,$host_cpu,;t t
+s, at host_vendor@,$host_vendor,;t t
+s, at host_os@,$host_os,;t t
+s, at CC@,$CC,;t t
+s, at CFLAGS@,$CFLAGS,;t t
+s, at LDFLAGS@,$LDFLAGS,;t t
+s, at CPPFLAGS@,$CPPFLAGS,;t t
+s, at ac_ct_CC@,$ac_ct_CC,;t t
+s, at EXEEXT@,$EXEEXT,;t t
+s, at OBJEXT@,$OBJEXT,;t t
+s, at DEPDIR@,$DEPDIR,;t t
+s, at am__include@,$am__include,;t t
+s, at am__quote@,$am__quote,;t t
+s, at AMDEP_TRUE@,$AMDEP_TRUE,;t t
+s, at AMDEP_FALSE@,$AMDEP_FALSE,;t t
+s, at AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
+s, at CCDEPMODE@,$CCDEPMODE,;t t
+s, at am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
+s, at am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
+s, at EGREP@,$EGREP,;t t
+s, at LN_S@,$LN_S,;t t
+s, at ECHO@,$ECHO,;t t
+s, at AR@,$AR,;t t
+s, at ac_ct_AR@,$ac_ct_AR,;t t
+s, at RANLIB@,$RANLIB,;t t
+s, at ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
+s, at CPP@,$CPP,;t t
+s, at CXX@,$CXX,;t t
+s, at CXXFLAGS@,$CXXFLAGS,;t t
+s, at ac_ct_CXX@,$ac_ct_CXX,;t t
+s, at CXXDEPMODE@,$CXXDEPMODE,;t t
+s, at am__fastdepCXX_TRUE@,$am__fastdepCXX_TRUE,;t t
+s, at am__fastdepCXX_FALSE@,$am__fastdepCXX_FALSE,;t t
+s, at CXXCPP@,$CXXCPP,;t t
+s, at F77@,$F77,;t t
+s, at FFLAGS@,$FFLAGS,;t t
+s, at ac_ct_F77@,$ac_ct_F77,;t t
+s, at LIBTOOL@,$LIBTOOL,;t t
+s, at OGG_CFLAGS@,$OGG_CFLAGS,;t t
+s, at OGG_LIBS@,$OGG_LIBS,;t t
+s, at src@,$src,;t t
+s, at LIBOBJS@,$LIBOBJS,;t t
+s, at SIZE16@,$SIZE16,;t t
+s, at SIZE32@,$SIZE32,;t t
+s, at LTLIBOBJS@,$LTLIBOBJS,;t t
+CEOF
+
+_ACEOF
+
+  cat >>$CONFIG_STATUS <<\_ACEOF
+  # Split the substitutions into bite-sized pieces for seds with
+  # small command number limits, like on Digital OSF/1 and HP-UX.
+  ac_max_sed_lines=48
+  ac_sed_frag=1 # Number of current file.
+  ac_beg=1 # First line for current file.
+  ac_end=$ac_max_sed_lines # Line after last line for current file.
+  ac_more_lines=:
+  ac_sed_cmds=
+  while $ac_more_lines; do
+    if test $ac_beg -gt 1; then
+      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    else
+      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    fi
+    if test ! -s $tmp/subs.frag; then
+      ac_more_lines=false
+    else
+      # The purpose of the label and of the branching condition is to
+      # speed up the sed processing (if there are no `@' at all, there
+      # is no need to browse any of the substitutions).
+      # These are the two extra sed commands mentioned above.
+      (echo ':t
+  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+      if test -z "$ac_sed_cmds"; then
+	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+      else
+	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+      fi
+      ac_sed_frag=`expr $ac_sed_frag + 1`
+      ac_beg=$ac_end
+      ac_end=`expr $ac_end + $ac_max_sed_lines`
+    fi
+  done
+  if test -z "$ac_sed_cmds"; then
+    ac_sed_cmds=cat
+  fi
+fi # test -n "$CONFIG_FILES"
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case $ac_file in
+  - | *:- | *:-:* ) # input from stdin
+	cat >$tmp/stdin
+	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  * )   ac_file_in=$ac_file.in ;;
+  esac
+
+  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+  ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+  case "$ac_dir" in
+  .) ac_abs_builddir=`pwd`;;
+  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+  *) ac_abs_builddir=`pwd`/"$ac_dir";;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+  case ${ac_top_builddir}. in
+  .) ac_abs_top_builddir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+  case $ac_srcdir in
+  .) ac_abs_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+  case $ac_top_srcdir in
+  .) ac_abs_top_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+  esac;;
+esac
+
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+  esac
+
+  # Let's still pretend it is `configure' which instantiates (i.e., don't
+  # use $as_me), people would be surprised to read:
+  #    /* config.h.  Generated by config.status.  */
+  if test x"$ac_file" = x-; then
+    configure_input=
+  else
+    configure_input="$ac_file.  "
+  fi
+  configure_input=$configure_input"Generated from `echo $ac_file_in |
+				     sed 's,.*/,,'` by configure."
+
+  # First look for the input files in the build tree, otherwise in the
+  # src tree.
+  ac_file_inputs=`IFS=:
+    for f in $ac_file_in; do
+      case $f in
+      -) echo $tmp/stdin ;;
+      [\\/$]*)
+	 # Absolute (can't be DOS-style, as IFS=:)
+	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 echo "$f";;
+      *) # Relative
+	 if test -f "$f"; then
+	   # Build tree
+	   echo "$f"
+	 elif test -f "$srcdir/$f"; then
+	   # Source tree
+	   echo "$srcdir/$f"
+	 else
+	   # /dev/null tree
+	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 fi;;
+      esac
+    done` || { (exit 1); exit 1; }
+
+  if test x"$ac_file" != x-; then
+    { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    rm -f "$ac_file"
+  fi
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+  sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s, at configure_input@,$configure_input,;t t
+s, at srcdir@,$ac_srcdir,;t t
+s, at abs_srcdir@,$ac_abs_srcdir,;t t
+s, at top_srcdir@,$ac_top_srcdir,;t t
+s, at abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s, at builddir@,$ac_builddir,;t t
+s, at abs_builddir@,$ac_abs_builddir,;t t
+s, at top_builddir@,$ac_top_builddir,;t t
+s, at abs_top_builddir@,$ac_abs_top_builddir,;t t
+s, at INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+  rm -f $tmp/stdin
+  if test x"$ac_file" != x-; then
+    mv $tmp/out $ac_file
+  else
+    cat $tmp/out
+    rm -f $tmp/out
+  fi
+
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_HEADER section.
+#
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s,^\([	 ]*\)#\([	 ]*define[	 ][	 ]*\)'
+ac_dB='[	 ].*$,\1#\2'
+ac_dC=' '
+ac_dD=',;t'
+# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_uA='s,^\([	 ]*\)#\([	 ]*\)undef\([	 ][	 ]*\)'
+ac_uB='$,\1#\2define\3'
+ac_uC=' '
+ac_uD=',;t'
+
+for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case $ac_file in
+  - | *:- | *:-:* ) # input from stdin
+	cat >$tmp/stdin
+	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  * )   ac_file_in=$ac_file.in ;;
+  esac
+
+  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+
+  # First look for the input files in the build tree, otherwise in the
+  # src tree.
+  ac_file_inputs=`IFS=:
+    for f in $ac_file_in; do
+      case $f in
+      -) echo $tmp/stdin ;;
+      [\\/$]*)
+	 # Absolute (can't be DOS-style, as IFS=:)
+	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 # Do quote $f, to prevent DOS paths from being IFS'd.
+	 echo "$f";;
+      *) # Relative
+	 if test -f "$f"; then
+	   # Build tree
+	   echo "$f"
+	 elif test -f "$srcdir/$f"; then
+	   # Source tree
+	   echo "$srcdir/$f"
+	 else
+	   # /dev/null tree
+	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 fi;;
+      esac
+    done` || { (exit 1); exit 1; }
+  # Remove the trailing spaces.
+  sed 's/[	 ]*$//' $ac_file_inputs >$tmp/in
+
+_ACEOF
+
+# Transform confdefs.h into two sed scripts, `conftest.defines' and
+# `conftest.undefs', that substitutes the proper values into
+# config.h.in to produce config.h.  The first handles `#define'
+# templates, and the second `#undef' templates.
+# And first: Protect against being on the right side of a sed subst in
+# config.status.  Protect against being in an unquoted here document
+# in config.status.
+rm -f conftest.defines conftest.undefs
+# Using a here document instead of a string reduces the quoting nightmare.
+# Putting comments in sed scripts is not portable.
+#
+# `end' is used to avoid that the second main sed command (meant for
+# 0-ary CPP macros) applies to n-ary macro definitions.
+# See the Autoconf documentation for `clear'.
+cat >confdef2sed.sed <<\_ACEOF
+s/[\\&,]/\\&/g
+s,[\\$`],\\&,g
+t clear
+: clear
+s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*\)\(([^)]*)\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
+t end
+s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
+: end
+_ACEOF
+# If some macros were called several times there might be several times
+# the same #defines, which is useless.  Nevertheless, we may not want to
+# sort them, since we want the *last* AC-DEFINE to be honored.
+uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
+sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
+rm -f confdef2sed.sed
+
+# This sed command replaces #undef with comments.  This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >>conftest.undefs <<\_ACEOF
+s,^[	 ]*#[	 ]*undef[	 ][	 ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
+_ACEOF
+
+# Break up conftest.defines because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
+echo '  if grep "^[	 ]*#[	 ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
+echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
+echo '  :' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.defines >/dev/null
+do
+  # Write a limited-size here document to $tmp/defines.sed.
+  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
+  # Speed up: don't consider the non `#define' lines.
+  echo '/^[	 ]*#[	 ]*define/!b' >>$CONFIG_STATUS
+  # Work around the forget-to-reset-the-flag bug.
+  echo 't clr' >>$CONFIG_STATUS
+  echo ': clr' >>$CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
+  echo 'CEOF
+  sed -f $tmp/defines.sed $tmp/in >$tmp/out
+  rm -f $tmp/in
+  mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
+  rm -f conftest.defines
+  mv conftest.tail conftest.defines
+done
+rm -f conftest.defines
+echo '  fi # grep' >>$CONFIG_STATUS
+echo >>$CONFIG_STATUS
+
+# Break up conftest.undefs because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.undefs >/dev/null
+do
+  # Write a limited-size here document to $tmp/undefs.sed.
+  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
+  # Speed up: don't consider the non `#undef'
+  echo '/^[	 ]*#[	 ]*undef/!b' >>$CONFIG_STATUS
+  # Work around the forget-to-reset-the-flag bug.
+  echo 't clr' >>$CONFIG_STATUS
+  echo ': clr' >>$CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
+  echo 'CEOF
+  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
+  rm -f $tmp/in
+  mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
+  rm -f conftest.undefs
+  mv conftest.tail conftest.undefs
+done
+rm -f conftest.undefs
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+  # Let's still pretend it is `configure' which instantiates (i.e., don't
+  # use $as_me), people would be surprised to read:
+  #    /* config.h.  Generated by config.status.  */
+  if test x"$ac_file" = x-; then
+    echo "/* Generated by configure.  */" >$tmp/config.h
+  else
+    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
+  fi
+  cat $tmp/in >>$tmp/config.h
+  rm -f $tmp/in
+  if test x"$ac_file" != x-; then
+    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
+      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+      { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+      rm -f $ac_file
+      mv $tmp/config.h $ac_file
+    fi
+  else
+    cat $tmp/config.h
+    rm -f $tmp/config.h
+  fi
+# Compute $ac_file's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $ac_file | $ac_file:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
+$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X$ac_file : 'X\(//\)[^/]' \| \
+	 X$ac_file : 'X\(//\)$' \| \
+	 X$ac_file : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X$ac_file |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`/stamp-h$_am_stamp_count
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_COMMANDS section.
+#
+for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
+  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
+  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
+  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
+$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_dest" : 'X\(//\)[^/]' \| \
+	 X"$ac_dest" : 'X\(//\)$' \| \
+	 X"$ac_dest" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_dest" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+  ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+  case "$ac_dir" in
+  .) ac_abs_builddir=`pwd`;;
+  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+  *) ac_abs_builddir=`pwd`/"$ac_dir";;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+  case ${ac_top_builddir}. in
+  .) ac_abs_top_builddir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+  case $ac_srcdir in
+  .) ac_abs_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+  case $ac_top_srcdir in
+  .) ac_abs_top_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+  esac;;
+esac
+
+
+  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
+echo "$as_me: executing $ac_dest commands" >&6;}
+  case $ac_dest in
+    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+  # Strip MF so we end up with the name of the file.
+  mf=`echo "$mf" | sed -e 's/:.*$//'`
+  # Check whether this is an Automake generated Makefile or not.
+  # We used to match only the files named `Makefile.in', but
+  # some people rename them; so instead we look at the file content.
+  # Grep'ing the first line is not enough: some people post-process
+  # each Makefile.in and add a new line on top of each file to say so.
+  # So let's grep whole file.
+  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+    dirpart=`(dirname "$mf") 2>/dev/null ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  else
+    continue
+  fi
+  grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
+  # Extract the definition of DEP_FILES from the Makefile without
+  # running `make'.
+  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+  test -z "$DEPDIR" && continue
+  # When using ansi2knr, U may be empty or an underscore; expand it
+  U=`sed -n 's/^U = //p' < "$mf"`
+  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
+  # We invoke sed twice because it is the simplest approach to
+  # changing $(DEPDIR) to its actual value in the expansion.
+  for file in `sed -n '
+    /^DEP_FILES = .*\\\\$/ {
+      s/^DEP_FILES = //
+      :loop
+	s/\\\\$//
+	p
+	n
+	/\\\\$/ b loop
+      p
+    }
+    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+    # Make sure the directory exists.
+    test -f "$dirpart/$file" && continue
+    fdir=`(dirname "$file") 2>/dev/null ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    { if $as_mkdir_p; then
+    mkdir -p $dirpart/$fdir
+  else
+    as_dir=$dirpart/$fdir
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
+echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+    # echo "creating $dirpart/$file"
+    echo '# dummy' > "$dirpart/$file"
+  done
+done
+ ;;
+  esac
+done
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || { (exit 1); exit 1; }
+fi
+
+
+if test "x$src" = "x"; then
+echo "**IMPORTANT**"
+echo "You don't seem to have the development package for libogg (libogg-devel) installed. Only the Speex library (libspeex) will be built (no encoder/decoder executable)"
+echo "You can download libogg from http://downloads.xiph.org/releases/ogg/"
+fi
+
+echo "Type \"make; make install\" to compile and install Speex";

Added: freeswitch/trunk/libs/speex/configure.ac
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/configure.ac	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,209 @@
+dnl Process this file with autoconf to produce a configure script. -*-m4-*-
+
+AC_INIT(libspeex/speex.c)
+
+AM_CONFIG_HEADER([config.h])
+
+SPEEX_MAJOR_VERSION=1
+SPEEX_MINOR_VERSION=1
+SPEEX_MICRO_VERSION=13
+SPEEX_EXTRA_VERSION=
+#SPEEX_VERSION=
+SPEEX_VERSION=$SPEEX_MAJOR_VERSION.$SPEEX_MINOR_VERSION.$SPEEX_MICRO_VERSION$SPEEX_EXTRA_VERSION
+SPEEX_VERSION="1.2beta1"
+
+SPEEX_LT_CURRENT=5
+SPEEX_LT_REVISION=0
+SPEEX_LT_AGE=4
+
+AC_SUBST(SPEEX_LT_CURRENT)
+AC_SUBST(SPEEX_LT_REVISION)
+AC_SUBST(SPEEX_LT_AGE)
+
+# For automake.
+VERSION=$SPEEX_VERSION
+PACKAGE=speex
+
+AC_SUBST(SPEEX_VERSION)
+
+AM_INIT_AUTOMAKE($PACKAGE, $VERSION, no-define)
+AM_MAINTAINER_MODE
+
+AC_CANONICAL_HOST
+AM_PROG_LIBTOOL
+
+AC_C_BIGENDIAN
+AC_C_CONST
+AC_C_INLINE
+AC_C_RESTRICT
+
+
+AC_MSG_CHECKING(for C99 variable-size arrays)
+AC_TRY_COMPILE( , [
+int foo=10;
+int array[foo];
+],
+[has_var_arrays=yes;AC_DEFINE([VAR_ARRAYS], [], [Use C99 variable-size arrays])
+],
+has_var_arrays=no
+)
+AC_MSG_RESULT($has_var_arrays)
+
+AC_MSG_CHECKING(for alloca)
+AC_TRY_COMPILE( [#include <alloca.h>], [
+int foo=10;
+int *array = alloca(foo);
+],
+[
+has_alloca=yes;
+if test x$has_var_arrays = "xno" ; then
+AC_DEFINE([USE_ALLOCA], [], [Make use of alloca])
+fi
+],
+has_alloca=no
+)
+AC_MSG_RESULT($has_alloca)
+
+
+AC_CHECK_HEADERS(sys/soundcard.h sys/audioio.h)
+
+XIPH_PATH_OGG([src="src"], [src=""])
+AC_SUBST(src)
+
+AC_CHECK_LIB(m, sin)
+
+# Check for getopt_long; if not found, use included source.
+AC_CHECK_FUNCS([getopt_long],,
+[# FreeBSD has a gnugetopt library.
+  AC_CHECK_LIB([gnugetopt],[getopt_long],
+[AC_DEFINE([HAVE_GETOPT_LONG])],
+[# Use the GNU replacement.
+AC_LIBOBJ(getopt)
+AC_LIBOBJ(getopt1)])])
+
+AC_CHECK_LIB(winmm, main)
+
+AC_DEFINE_UNQUOTED(SPEEX_VERSION, "${SPEEX_VERSION}", [Complete version string])
+AC_DEFINE_UNQUOTED(SPEEX_MAJOR_VERSION, ${SPEEX_MAJOR_VERSION}, [Version major])
+AC_DEFINE_UNQUOTED(SPEEX_MINOR_VERSION, ${SPEEX_MINOR_VERSION}, [Version minor])
+AC_DEFINE_UNQUOTED(SPEEX_MICRO_VERSION, ${SPEEX_MICRO_VERSION}, [Version micro])
+AC_DEFINE_UNQUOTED(SPEEX_EXTRA_VERSION, "${SPEEX_EXTRA_VERSION}", [Version extra])
+
+AC_ARG_ENABLE(wideband, [  --disable-wideband      Disable wideband codec],
+[if test "$enableval" = no; then
+  AC_DEFINE([DISABLE_WIDEBAND], , [Disable wideband codec])
+fi])
+
+AC_ARG_ENABLE(vorbis-psy, [  --enable-vorbis-psy       Enable Vorbis-style psychoacoustics (EXPERIMENTAL)],
+[if test "$enableval" = yes; then
+  AC_DEFINE([VORBIS_PSYCHO], , [Enable Vorbis-style psychoacoustics (EXPERIMENTAL)])
+fi])
+
+AC_ARG_ENABLE(valgrind, [  --enable-valgrind       Enable valgrind extra checks],
+[if test "$enableval" = yes; then
+  AC_DEFINE([ENABLE_VALGRIND], , [Enable valgrind extra checks])
+fi])
+
+AC_ARG_ENABLE(sse, [  --enable-sse            Enable SSE support], [if test "$enableval" = yes; then
+AC_DEFINE([_USE_SSE], , [Enable SSE support])
+CFLAGS="$CFLAGS -O3 -msse"
+fi
+])
+
+AC_ARG_ENABLE(fixed-point, [  --enable-fixed-point    Compile as fixed-point],
+[if test "$enableval" = yes; then
+  AC_DEFINE([FIXED_POINT], , [Compile as fixed-point])
+fi])
+
+AC_ARG_ENABLE(arm4-asm, [  --enable-arm4-asm       Make use of ARM4 assembly optimizations],
+[if test "$enableval" = yes; then
+  AC_DEFINE([ARM4_ASM], , [Make use of ARM4 assembly optimizations])
+fi])
+
+AC_ARG_ENABLE(arm5e-asm, [  --enable-arm5e-asm      Make use of ARM5E assembly optimizations],
+[if test "$enableval" = yes; then
+  AC_DEFINE([ARM5E_ASM], , [Make use of ARM5E assembly optimizations])
+fi])
+
+AC_ARG_ENABLE(blackfin-asm, [  --enable-blackfin-asm      Make use of Blackfin assembly optimizations],
+[if test "$enableval" = yes; then
+  AC_DEFINE([BFIN_ASM], , [Make use of Blackfin assembly optimizations])
+  LDFLAGS="-Wl,-elf2flt=-s100000"
+fi])
+
+AC_ARG_ENABLE(fixed-point-debug, [  --enable-fixed-point-debug  Debug fixed-point implementation],
+[if test "$enableval" = yes; then
+  AC_DEFINE([FIXED_DEBUG], , [Debug fixed-point implementation])
+fi])
+
+AC_ARG_ENABLE(epic-48k, [  --enable-epic-48k       Enable support for Epic 4.8 kbps mode],
+[if test "$enableval" = yes; then
+  AC_DEFINE([EPIC_48K], , [Enable support for Epic 4.8 kbps mode])
+fi])
+
+AC_ARG_ENABLE(ti-c55x, [  --enable-ti-c55x        Enable support for TI C55X DSP],
+[if test "$enableval" = yes; then
+  has_char16=yes;
+  AC_DEFINE([TI_C55X], , [Enable support for TI C55X DSP])
+fi])
+
+AC_ARG_ENABLE(16bit-precision, [  --enable-16bit-precision Reduce precision to 16 bits (EXPERIMENTAL)],
+[if test "$enableval" = yes; then
+  AC_DEFINE([PRECISION16], , [Reduce precision to 16 bits (EXPERIMENTAL)])
+fi])
+
+AC_CHECK_SIZEOF(short)
+AC_CHECK_SIZEOF(int)
+AC_CHECK_SIZEOF(long)
+
+if test x$has_char16 = "xyes" ; then
+        case 1 in
+                $ac_cv_sizeof_short) SIZE16="short";;
+                $ac_cv_sizeof_int) SIZE16="int";;
+        esac
+else
+        case 2 in
+                $ac_cv_sizeof_short) SIZE16="short";;
+                $ac_cv_sizeof_int) SIZE16="int";;
+        esac
+fi
+
+if test x$has_char16 = "xyes" ; then
+        case 2 in
+                $ac_cv_sizeof_int) SIZE32="int";;
+                $ac_cv_sizeof_long) SIZE32="long";;
+                $ac_cv_sizeof_short) SIZE32="short";;
+        esac
+else
+        case 4 in
+                $ac_cv_sizeof_int) SIZE32="int";;
+                $ac_cv_sizeof_long) SIZE32="long";;
+                $ac_cv_sizeof_short) SIZE32="short";;
+        esac
+fi
+
+AC_SUBST(SIZE16)
+AC_SUBST(SIZE32)
+
+AC_OUTPUT([Makefile libspeex/Makefile src/Makefile doc/Makefile Speex.spec
+           include/Makefile include/speex/Makefile speex.pc
+           win32/Makefile win32/libspeex/Makefile win32/speexenc/Makefile
+           win32/speexdec/Makefile symbian/Makefile 
+           win32/VS2003/Makefile win32/VS2005/Makefile
+           win32/VS2003/libspeex/Makefile
+           win32/VS2003/speexdec/Makefile
+           win32/VS2003/speexenc/Makefile
+           win32/VS2005/libspeex/Makefile
+           win32/VS2005/speexdec/Makefile
+           win32/VS2005/speexenc/Makefile
+           include/speex/speex_config_types.h ti/Makefile 
+	   ti/speex_C54_test/Makefile ti/speex_C55_test/Makefile
+	   ti/speex_C64_test/Makefile ])
+
+if test "x$src" = "x"; then 
+echo "**IMPORTANT**"
+echo "You don't seem to have the development package for libogg (libogg-devel) installed. Only the Speex library (libspeex) will be built (no encoder/decoder executable)"
+echo "You can download libogg from http://downloads.xiph.org/releases/ogg/"
+fi
+
+echo "Type \"make; make install\" to compile and install Speex";

Added: freeswitch/trunk/libs/speex/depcomp
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/depcomp	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,526 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2004-04-25.13
+
+# Copyright (C) 1999, 2000, 2003, 2004 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva at dcc.unicamp.br>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by `PROGRAMS ARGS'.
+  object      Object file output by `PROGRAMS ARGS'.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputing dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake at gnu.org>.
+EOF
+    exit 0
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit 0
+    ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+# `libtool' can also be set to `yes' or `no'.
+
+if test -z "$depfile"; then
+   base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
+   dir=`echo "$object" | sed 's,/.*$,/,'`
+   if test "$dir" = "$object"; then
+      dir=
+   fi
+   # FIXME: should be _deps on DOS.
+   depfile="$dir.deps/$base"
+fi
+
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> $depfile
+    echo >> $depfile
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> $depfile
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+  tmpdepfile="$stripped.u"
+  if test "$libtool" = yes; then
+    "$@" -Wc,-M
+  else
+    "$@" -M
+  fi
+  stat=$?
+
+  if test -f "$tmpdepfile"; then :
+  else
+    stripped=`echo "$stripped" | sed 's,^.*/,,'`
+    tmpdepfile="$stripped.u"
+  fi
+
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+
+  if test -f "$tmpdepfile"; then
+    outname="$stripped.o"
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+icc)
+  # Intel's C compiler understands `-MD -MF file'.  However on
+  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+  # ICC 7.0 will fill foo.d with something like
+  #    foo.o: sub/foo.c
+  #    foo.o: sub/foo.h
+  # which is wrong.  We want:
+  #    sub/foo.o: sub/foo.c
+  #    sub/foo.o: sub/foo.h
+  #    sub/foo.c:
+  #    sub/foo.h:
+  # ICC 7.1 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using \ :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+    sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      # Dependencies are output in .lo.d with libtool 1.4.
+      # They are output in .o.d with libtool 1.5.
+      tmpdepfile1="$dir.libs/$base.lo.d"
+      tmpdepfile2="$dir.libs/$base.o.d"
+      tmpdepfile3="$dir.libs/$base.d"
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1="$dir$base.o.d"
+      tmpdepfile2="$dir$base.d"
+      tmpdepfile3="$dir$base.d"
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+      exit $stat
+   fi
+
+   if test -f "$tmpdepfile1"; then
+      tmpdepfile="$tmpdepfile1"
+   elif test -f "$tmpdepfile2"; then
+      tmpdepfile="$tmpdepfile2"
+   else
+      tmpdepfile="$tmpdepfile3"
+   fi
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a tab and a space in the [].
+      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for `:'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  "$@" $dashmflag |
+    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no
+  for arg in "$@"; do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  "$@" || exit $?
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
+    esac
+  done
+  "$@" -E |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

Added: freeswitch/trunk/libs/speex/doc/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/doc/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,5 @@
+docdir=$(prefix)/share/doc/@PACKAGE at -@VERSION@
+
+doc_DATA = manual.pdf
+
+EXTRA_DIST = $(doc_DATA)

Added: freeswitch/trunk/libs/speex/doc/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/doc/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,345 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = doc
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+am__installdirs = "$(DESTDIR)$(docdir)"
+docDATA_INSTALL = $(INSTALL_DATA)
+DATA = $(doc_DATA)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+docdir = $(prefix)/share/doc/@PACKAGE at -@VERSION@
+doc_DATA = manual.pdf
+EXTRA_DIST = $(doc_DATA)
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  doc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+install-docDATA: $(doc_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(docdir)" || $(mkdir_p) "$(DESTDIR)$(docdir)"
+	@list='$(doc_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
+	  $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
+	done
+
+uninstall-docDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(doc_DATA)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
+	done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(docdir)"; do \
+	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-docDATA
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-docDATA uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-docDATA install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	uninstall uninstall-am uninstall-docDATA uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/doc/manual.pdf
==============================================================================
Binary file. No diff available.

Added: freeswitch/trunk/libs/speex/include/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/include/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,2 @@
+
+SUBDIRS = speex

Added: freeswitch/trunk/libs/speex/include/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/include/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,462 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = include
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-exec-recursive install-info-recursive \
+	install-recursive installcheck-recursive installdirs-recursive \
+	pdf-recursive ps-recursive uninstall-info-recursive \
+	uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS = speex
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  include/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  include/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || mkdir "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="../$(top_distdir)" \
+	        distdir="../$(distdir)/$$subdir" \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
+	clean clean-generic clean-libtool clean-recursive ctags \
+	ctags-recursive distclean distclean-generic distclean-libtool \
+	distclean-recursive distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-exec install-exec-am install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic maintainer-clean-recursive \
+	mostlyclean mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/include/speex/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/include/speex/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,15 @@
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+nodist_pkginclude_HEADERS = speex_config_types.h
+
+pkginclude_HEADERS =  speex.h \
+	speex_types.h \
+	speex_bits.h \
+	speex_header.h \
+	speex_callbacks.h \
+	speex_stereo.h \
+	speex_preprocess.h \
+	speex_jitter.h \
+	speex_echo.h
+

Added: freeswitch/trunk/libs/speex/include/speex/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/include/speex/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,427 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = include/speex
+DIST_COMMON = $(pkginclude_HEADERS) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(srcdir)/speex_config_types.h.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = speex_config_types.h
+SOURCES =
+DIST_SOURCES =
+am__installdirs = "$(DESTDIR)$(pkgincludedir)" "$(DESTDIR)$(pkgincludedir)"
+nodist_pkgincludeHEADERS_INSTALL = $(INSTALL_HEADER)
+pkgincludeHEADERS_INSTALL = $(INSTALL_HEADER)
+HEADERS = $(nodist_pkginclude_HEADERS) $(pkginclude_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+nodist_pkginclude_HEADERS = speex_config_types.h
+pkginclude_HEADERS = speex.h \
+	speex_types.h \
+	speex_bits.h \
+	speex_header.h \
+	speex_callbacks.h \
+	speex_stereo.h \
+	speex_preprocess.h \
+	speex_jitter.h \
+	speex_echo.h
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  include/speex/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  include/speex/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+speex_config_types.h: $(top_builddir)/config.status $(srcdir)/speex_config_types.h.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+install-nodist_pkgincludeHEADERS: $(nodist_pkginclude_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(pkgincludedir)" || $(mkdir_p) "$(DESTDIR)$(pkgincludedir)"
+	@list='$(nodist_pkginclude_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(nodist_pkgincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgincludedir)/$$f'"; \
+	  $(nodist_pkgincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgincludedir)/$$f"; \
+	done
+
+uninstall-nodist_pkgincludeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nodist_pkginclude_HEADERS)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f '$(DESTDIR)$(pkgincludedir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(pkgincludedir)/$$f"; \
+	done
+install-pkgincludeHEADERS: $(pkginclude_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(pkgincludedir)" || $(mkdir_p) "$(DESTDIR)$(pkgincludedir)"
+	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(pkgincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgincludedir)/$$f'"; \
+	  $(pkgincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgincludedir)/$$f"; \
+	done
+
+uninstall-pkgincludeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f '$(DESTDIR)$(pkgincludedir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(pkgincludedir)/$$f"; \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(HEADERS)
+installdirs:
+	for dir in "$(DESTDIR)$(pkgincludedir)" "$(DESTDIR)$(pkgincludedir)"; do \
+	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-nodist_pkgincludeHEADERS \
+	install-pkgincludeHEADERS
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am uninstall-nodist_pkgincludeHEADERS \
+	uninstall-pkgincludeHEADERS
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+	clean-libtool ctags distclean distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-exec install-exec-am install-info \
+	install-info-am install-man install-nodist_pkgincludeHEADERS \
+	install-pkgincludeHEADERS install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
+	uninstall-am uninstall-info-am \
+	uninstall-nodist_pkgincludeHEADERS uninstall-pkgincludeHEADERS
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/include/speex/speex.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/include/speex/speex.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,431 @@
+/* Copyright (C) 2002-2006 Jean-Marc Valin*/
+/**
+  @file speex.h
+  @brief Describes the different modes of the codec
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifndef SPEEX_H
+#define SPEEX_H
+
+#include "speex/speex_bits.h"
+#include "speex/speex_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Values allowed for *ctl() requests */
+
+/** Set enhancement on/off (decoder only) */
+#define SPEEX_SET_ENH 0
+/** Get enhancement state (decoder only) */
+#define SPEEX_GET_ENH 1
+
+/*Would be SPEEX_SET_FRAME_SIZE, but it's (currently) invalid*/
+/** Obtain frame size used by encoder/decoder */
+#define SPEEX_GET_FRAME_SIZE 3
+
+/** Set quality value */
+#define SPEEX_SET_QUALITY 4
+/** Get current quality setting */
+/* #define SPEEX_GET_QUALITY 5 -- Doesn't make much sense, does it? */
+
+/** Set sub-mode to use */
+#define SPEEX_SET_MODE 6
+/** Get current sub-mode in use */
+#define SPEEX_GET_MODE 7
+
+/** Set low-band sub-mode to use (wideband only)*/
+#define SPEEX_SET_LOW_MODE 8
+/** Get current low-band mode in use (wideband only)*/
+#define SPEEX_GET_LOW_MODE 9
+
+/** Set high-band sub-mode to use (wideband only)*/
+#define SPEEX_SET_HIGH_MODE 10
+/** Get current high-band mode in use (wideband only)*/
+#define SPEEX_GET_HIGH_MODE 11
+
+/** Set VBR on (1) or off (0) */
+#define SPEEX_SET_VBR 12
+/** Get VBR status (1 for on, 0 for off) */
+#define SPEEX_GET_VBR 13
+
+/** Set quality value for VBR encoding (0-10) */
+#define SPEEX_SET_VBR_QUALITY 14
+/** Get current quality value for VBR encoding (0-10) */
+#define SPEEX_GET_VBR_QUALITY 15
+
+/** Set complexity of the encoder (0-10) */
+#define SPEEX_SET_COMPLEXITY 16
+/** Get current complexity of the encoder (0-10) */
+#define SPEEX_GET_COMPLEXITY 17
+
+/** Set bit-rate used by the encoder (or lower) */
+#define SPEEX_SET_BITRATE 18
+/** Get current bit-rate used by the encoder or decoder */
+#define SPEEX_GET_BITRATE 19
+
+/** Define a handler function for in-band Speex request*/
+#define SPEEX_SET_HANDLER 20
+
+/** Define a handler function for in-band user-defined request*/
+#define SPEEX_SET_USER_HANDLER 22
+
+/** Set sampling rate used in bit-rate computation */
+#define SPEEX_SET_SAMPLING_RATE 24
+/** Get sampling rate used in bit-rate computation */
+#define SPEEX_GET_SAMPLING_RATE 25
+
+/** Reset the encoder/decoder memories to zero*/
+#define SPEEX_RESET_STATE 26
+
+/** Get VBR info (mostly used internally) */
+#define SPEEX_GET_RELATIVE_QUALITY 29
+
+/** Set VAD status (1 for on, 0 for off) */
+#define SPEEX_SET_VAD 30
+
+/** Get VAD status (1 for on, 0 for off) */
+#define SPEEX_GET_VAD 31
+
+/** Set Average Bit-Rate (ABR) to n bits per seconds */
+#define SPEEX_SET_ABR 32
+/** Get Average Bit-Rate (ABR) setting (in bps) */
+#define SPEEX_GET_ABR 33
+
+/** Set DTX status (1 for on, 0 for off) */
+#define SPEEX_SET_DTX 34
+/** Get DTX status (1 for on, 0 for off) */
+#define SPEEX_GET_DTX 35
+
+/** Set submode encoding in each frame (1 for yes, 0 for no, setting to no breaks the standard) */
+#define SPEEX_SET_SUBMODE_ENCODING 36
+/** Get submode encoding in each frame */
+#define SPEEX_GET_SUBMODE_ENCODING 37
+
+/*#define SPEEX_SET_LOOKAHEAD 38*/
+/** Returns the lookahead used by Speex */
+#define SPEEX_GET_LOOKAHEAD 39
+
+/** Sets tuning for packet-loss concealment (expected loss rate) */
+#define SPEEX_SET_PLC_TUNING 40
+/** Gets tuning for PLC */
+#define SPEEX_GET_PLC_TUNING 41
+
+/** Sets the max bit-rate allowed in VBR mode */
+#define SPEEX_SET_VBR_MAX_BITRATE 42
+/** Gets the max bit-rate allowed in VBR mode */
+#define SPEEX_GET_VBR_MAX_BITRATE 43
+
+/** Turn on/off input/output high-pass filtering */
+#define SPEEX_SET_HIGHPASS 44
+/** Get status of input/output high-pass filtering */
+#define SPEEX_GET_HIGHPASS 45
+
+/* Used internally, NOT TO BE USED in applications */
+/** Used internally*/
+#define SPEEX_GET_PI_GAIN 100
+/** Used internally*/
+#define SPEEX_GET_EXC     101
+/** Used internally*/
+#define SPEEX_GET_INNOV   102
+/** Used internally*/
+#define SPEEX_GET_DTX_STATUS   103
+/** Used internally*/
+#define SPEEX_SET_INNOVATION_SAVE   104
+/** Used internally*/
+#define SPEEX_SET_WIDEBAND   105
+
+
+/* Preserving compatibility:*/
+/** Equivalent to SPEEX_SET_ENH */
+#define SPEEX_SET_PF 0
+/** Equivalent to SPEEX_GET_ENH */
+#define SPEEX_GET_PF 1
+
+
+
+
+/* Values allowed for mode queries */
+/** Query the frame size of a mode */
+#define SPEEX_MODE_FRAME_SIZE 0
+
+/** Query the size of an encoded frame for a particular sub-mode */
+#define SPEEX_SUBMODE_BITS_PER_FRAME 1
+
+
+
+/** Get major Speex version */
+#define SPEEX_LIB_GET_MAJOR_VERSION 1
+/** Get minor Speex version */
+#define SPEEX_LIB_GET_MINOR_VERSION 3
+/** Get micro Speex version */
+#define SPEEX_LIB_GET_MICRO_VERSION 5
+/** Get extra Speex version */
+#define SPEEX_LIB_GET_EXTRA_VERSION 7
+/** Get Speex version string */
+#define SPEEX_LIB_GET_VERSION_STRING 9
+
+/*#define SPEEX_LIB_SET_ALLOC_FUNC 10
+#define SPEEX_LIB_GET_ALLOC_FUNC 11
+#define SPEEX_LIB_SET_FREE_FUNC 12
+#define SPEEX_LIB_GET_FREE_FUNC 13
+
+#define SPEEX_LIB_SET_WARNING_FUNC 14
+#define SPEEX_LIB_GET_WARNING_FUNC 15
+#define SPEEX_LIB_SET_ERROR_FUNC 16
+#define SPEEX_LIB_GET_ERROR_FUNC 17
+*/
+
+/** Number of defined modes in Speex */
+#define SPEEX_NB_MODES 3
+
+/** modeID for the defined narrowband mode */
+#define SPEEX_MODEID_NB 0
+
+/** modeID for the defined wideband mode */
+#define SPEEX_MODEID_WB 1
+
+/** modeID for the defined ultra-wideband mode */
+#define SPEEX_MODEID_UWB 2
+
+#ifdef EPIC_48K
+/** modeID for the Epic 48K mode */
+#define SPEEX_MODEID_NB_48K 1000
+#endif
+
+struct SpeexMode;
+
+
+/* Prototypes for mode function pointers */
+
+/** Encoder state initialization function */
+typedef void *(*encoder_init_func)(const struct SpeexMode *mode);
+
+/** Encoder state destruction function */
+typedef void (*encoder_destroy_func)(void *st);
+
+/** Main encoding function */
+typedef int (*encode_func)(void *state, void *in, SpeexBits *bits);
+
+/** Function for controlling the encoder options */
+typedef int (*encoder_ctl_func)(void *state, int request, void *ptr);
+
+/** Decoder state initialization function */
+typedef void *(*decoder_init_func)(const struct SpeexMode *mode);
+
+/** Decoder state destruction function */
+typedef void (*decoder_destroy_func)(void *st);
+
+/** Main decoding function */
+typedef int  (*decode_func)(void *state, SpeexBits *bits, void *out);
+
+/** Function for controlling the decoder options */
+typedef int (*decoder_ctl_func)(void *state, int request, void *ptr);
+
+
+/** Query function for a mode */
+typedef int (*mode_query_func)(const void *mode, int request, void *ptr);
+
+/** Struct defining a Speex mode */ 
+typedef struct SpeexMode {
+   /** Pointer to the low-level mode data */
+   const void *mode;
+
+   /** Pointer to the mode query function */
+   mode_query_func query;
+   
+   /** The name of the mode (you should not rely on this to identify the mode)*/
+   const char *modeName;
+
+   /**ID of the mode*/
+   int modeID;
+
+   /**Version number of the bitstream (incremented every time we break
+    bitstream compatibility*/
+   int bitstream_version;
+
+   /** Pointer to encoder initialization function */
+   encoder_init_func enc_init;
+
+   /** Pointer to encoder destruction function */
+   encoder_destroy_func enc_destroy;
+
+   /** Pointer to frame encoding function */
+   encode_func enc;
+
+   /** Pointer to decoder initialization function */
+   decoder_init_func dec_init;
+
+   /** Pointer to decoder destruction function */
+   decoder_destroy_func dec_destroy;
+
+   /** Pointer to frame decoding function */
+   decode_func dec;
+
+   /** ioctl-like requests for encoder */
+   encoder_ctl_func enc_ctl;
+
+   /** ioctl-like requests for decoder */
+   decoder_ctl_func dec_ctl;
+
+} SpeexMode;
+
+/**
+ * Returns a handle to a newly created Speex encoder state structure. For now, 
+ * the "mode" argument can be &nb_mode or &wb_mode . In the future, more modes 
+ * may be added. Note that for now if you have more than one channels to 
+ * encode, you need one state per channel.
+ *
+ * @param mode The mode to use (either speex_nb_mode or speex_wb.mode) 
+ * @return A newly created encoder
+ */
+void *speex_encoder_init(const SpeexMode *mode);
+
+/** Frees all resources associated to an existing Speex encoder state. 
+ * @param state Encoder state to be destroyed */
+void speex_encoder_destroy(void *state);
+
+/** Uses an existing encoder state to encode one frame of speech pointed to by
+    "in". The encoded bit-stream is saved in "bits".
+ @param state Encoder state
+ @param in Frame that will be encoded with a +-2^15 range
+ @param bits Bit-stream where the data will be written
+ @return 0 if frame needs not be transmitted (DTX only), 1 otherwise
+ */
+int speex_encode(void *state, float *in, SpeexBits *bits);
+
+/** Uses an existing encoder state to encode one frame of speech pointed to by
+    "in". The encoded bit-stream is saved in "bits".
+ @param state Encoder state
+ @param in Frame that will be encoded with a +-2^15 range
+ @param bits Bit-stream where the data will be written
+ @return 0 if frame needs not be transmitted (DTX only), 1 otherwise
+ */
+int speex_encode_int(void *state, spx_int16_t *in, SpeexBits *bits);
+
+/** Used like the ioctl function to control the encoder parameters
+ *
+ * @param state Encoder state
+ * @param request ioctl-type request (one of the SPEEX_* macros)
+ * @param ptr Data exchanged to-from function
+ * @return 0 if no error, -1 if request in unknown
+ */
+int speex_encoder_ctl(void *state, int request, void *ptr);
+
+
+/** Returns a handle to a newly created decoder state structure. For now, 
+ * the mode argument can be &nb_mode or &wb_mode . In the future, more modes
+ * may be added.  Note that for now if you have more than one channels to
+ * decode, you need one state per channel.
+ *
+ * @param mode Speex mode (one of speex_nb_mode or speex_wb_mode)
+ * @return A newly created decoder state
+ */ 
+void *speex_decoder_init(const SpeexMode *mode);
+
+/** Frees all resources associated to an existing decoder state.
+ *
+ * @param state State to be destroyed
+ */
+void speex_decoder_destroy(void *state);
+
+/** Uses an existing decoder state to decode one frame of speech from
+ * bit-stream bits. The output speech is saved written to out.
+ *
+ * @param state Decoder state
+ * @param bits Bit-stream from which to decode the frame (NULL if the packet was lost)
+ * @param out Where to write the decoded frame
+ * @return return status (0 for no error, -1 for end of stream, -2 corrupt stream)
+ */
+int speex_decode(void *state, SpeexBits *bits, float *out);
+
+/** Uses an existing decoder state to decode one frame of speech from
+ * bit-stream bits. The output speech is saved written to out.
+ *
+ * @param state Decoder state
+ * @param bits Bit-stream from which to decode the frame (NULL if the packet was lost)
+ * @param out Where to write the decoded frame
+ * @return return status (0 for no error, -1 for end of stream, -2 corrupt stream)
+ */
+int speex_decode_int(void *state, SpeexBits *bits, spx_int16_t *out);
+
+/** Used like the ioctl function to control the encoder parameters
+ *
+ * @param state Decoder state
+ * @param request ioctl-type request (one of the SPEEX_* macros)
+ * @param ptr Data exchanged to-from function
+ * @return 0 if no error, -1 if request in unknown
+ */
+int speex_decoder_ctl(void *state, int request, void *ptr);
+
+
+/** Query function for mode information
+ *
+ * @param mode Speex mode
+ * @param request ioctl-type request (one of the SPEEX_* macros)
+ * @param ptr Data exchanged to-from function
+ */
+int speex_mode_query(const SpeexMode *mode, int request, void *ptr);
+
+/** Functions for controlling the behavior of libspeex
+ * @param request ioctl-type request (one of the SPEEX_LIB_* macros)
+ * @param ptr Data exchanged to-from function
+ */
+int speex_lib_ctl(int request, void *ptr);
+
+/** Default narrowband mode */
+extern const SpeexMode speex_nb_mode;
+
+/** Default wideband mode */
+extern const SpeexMode speex_wb_mode;
+
+/** Default "ultra-wideband" mode */
+extern const SpeexMode speex_uwb_mode;
+
+#ifdef EPIC_48K
+/** 4.8 kbps narrowband mode */
+extern const SpeexMode speex_nb_48k_mode;
+#endif
+
+/** List of all modes available */
+extern const SpeexMode * const speex_mode_list[SPEEX_NB_MODES];
+
+/** Obtain one of the modes available */
+const SpeexMode * speex_lib_get_mode (int mode);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif

Added: freeswitch/trunk/libs/speex/include/speex/speex_bits.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/include/speex/speex_bits.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,151 @@
+/* Copyright (C) 2002 Jean-Marc Valin */
+/**
+   @file speex_bits.h
+   @brief Handles bit packing/unpacking
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifndef BITS_H
+#define BITS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Bit-packing data structure representing (part of) a bit-stream. */
+typedef struct SpeexBits {
+   char *chars;   /**< "raw" data */
+   int   nbBits;  /**< Total number of bits stored in the stream*/
+   int   charPtr; /**< Position of the byte "cursor" */
+   int   bitPtr;  /**< Position of the bit "cursor" within the current char */
+   int   owner;   /**< Does the struct "own" the "raw" buffer (member "chars") */
+   int   overflow;/**< Set to one if we try to read past the valid data */
+   int   buf_size;/**< Allocated size for buffer */
+   int   reserved1; /**< Reserved for future use */
+   void *reserved2; /**< Reserved for future use */
+} SpeexBits;
+
+/** Initializes and allocates resources for a SpeexBits struct */
+void speex_bits_init(SpeexBits *bits);
+
+/** Initializes SpeexBits struct using a pre-allocated buffer*/
+void speex_bits_init_buffer(SpeexBits *bits, void *buff, int buf_size);
+
+/** Frees all resources associated to a SpeexBits struct. Right now this does nothing since no resources are allocated, but this could change in the future.*/
+void speex_bits_destroy(SpeexBits *bits);
+
+/** Resets bits to initial value (just after initialization, erasing content)*/
+void speex_bits_reset(SpeexBits *bits);
+
+/** Rewind the bit-stream to the beginning (ready for read) without erasing the content */
+void speex_bits_rewind(SpeexBits *bits);
+
+/** Initializes the bit-stream from the data in an area of memory */
+void speex_bits_read_from(SpeexBits *bits, char *bytes, int len);
+
+/** Append bytes to the bit-stream
+ * @param bits Bit-stream to operate on
+ * @param bytes pointer to the bytes what will be appended
+ * @param len Number of bytes of append
+ */
+void speex_bits_read_whole_bytes(SpeexBits *bits, char *bytes, int len);
+
+/** Write the content of a bit-stream to an area of memory */
+int speex_bits_write(SpeexBits *bits, char *bytes, int max_len);
+
+/** Like speex_bits_write, but writes only the complete bytes in the stream. Also removes the written bytes from the stream */
+int speex_bits_write_whole_bytes(SpeexBits *bits, char *bytes, int max_len);
+
+/** Append bits to the bit-stream
+ * @param bits Bit-stream to operate on
+ * @param data Value to append as integer
+ * @param nbBits number of bits to consider in "data"
+ */
+void speex_bits_pack(SpeexBits *bits, int data, int nbBits);
+
+/** Interpret the next bits in the bit-stream as a signed integer
+ *
+ * @param bits Bit-stream to operate on
+ * @param nbBits Number of bits to interpret
+ * @return A signed integer represented by the bits read
+ */
+int speex_bits_unpack_signed(SpeexBits *bits, int nbBits);
+
+/** Interpret the next bits in the bit-stream as an unsigned integer
+ *
+ * @param bits Bit-stream to operate on
+ * @param nbBits Number of bits to interpret
+ * @return An unsigned integer represented by the bits read
+ */
+unsigned int speex_bits_unpack_unsigned(SpeexBits *bits, int nbBits);
+
+/** Returns the number of bytes in the bit-stream, including the last one even if it is not "full"
+ *
+ * @param bits Bit-stream to operate on
+ * @return Number of bytes in the stream
+ */
+int speex_bits_nbytes(SpeexBits *bits);
+
+/** Same as speex_bits_unpack_unsigned, but without modifying the cursor position */
+unsigned int speex_bits_peek_unsigned(SpeexBits *bits, int nbBits);
+
+/** Get the value of the next bit in the stream, without modifying the
+ * "cursor" position 
+ * 
+ * @param bits Bit-stream to operate on
+ */
+int speex_bits_peek(SpeexBits *bits);
+
+/** Advances the position of the "bit cursor" in the stream 
+ *
+ * @param bits Bit-stream to operate on
+ * @param n Number of bits to advance
+ */
+void speex_bits_advance(SpeexBits *bits, int n);
+
+/** Returns the number of bits remaining to be read in a stream
+ *
+ * @param bits Bit-stream to operate on
+ */
+int speex_bits_remaining(SpeexBits *bits);
+
+/** Insert a terminator so that the data can be sent as a packet while auto-detecting 
+ * the number of frames in each packet 
+ *
+ * @param bits Bit-stream to operate on
+ */
+void speex_bits_insert_terminator(SpeexBits *bits);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

Added: freeswitch/trunk/libs/speex/include/speex/speex_callbacks.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/include/speex/speex_callbacks.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,128 @@
+/* Copyright (C) 2002 Jean-Marc Valin*/
+/**
+  @file speex_callbacks.h
+  @brief Describes callback handling and in-band signalling
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifndef SPEEX_CALLBACKS_H
+#define SPEEX_CALLBACKS_H
+
+#include "speex.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Total number of callbacks */
+#define SPEEX_MAX_CALLBACKS 16
+
+/* Describes all the in-band requests */
+
+/*These are 1-bit requests*/
+/** Request for perceptual enhancement (1 for on, 0 for off) */
+#define SPEEX_INBAND_ENH_REQUEST         0
+/** Reserved */
+#define SPEEX_INBAND_RESERVED1           1
+
+/*These are 4-bit requests*/
+/** Request for a mode change */
+#define SPEEX_INBAND_MODE_REQUEST        2
+/** Request for a low mode change */
+#define SPEEX_INBAND_LOW_MODE_REQUEST    3
+/** Request for a high mode change */
+#define SPEEX_INBAND_HIGH_MODE_REQUEST   4
+/** Request for VBR (1 on, 0 off) */
+#define SPEEX_INBAND_VBR_QUALITY_REQUEST 5
+/** Request to be sent acknowledge */
+#define SPEEX_INBAND_ACKNOWLEDGE_REQUEST 6
+/** Request for VBR (1 for on, 0 for off) */
+#define SPEEX_INBAND_VBR_REQUEST         7
+
+/*These are 8-bit requests*/
+/** Send a character in-band */
+#define SPEEX_INBAND_CHAR                8
+/** Intensity stereo information */
+#define SPEEX_INBAND_STEREO              9
+
+/*These are 16-bit requests*/
+/** Transmit max bit-rate allowed */
+#define SPEEX_INBAND_MAX_BITRATE         10
+
+/*These are 32-bit requests*/
+/** Acknowledge packet reception */
+#define SPEEX_INBAND_ACKNOWLEDGE         12
+
+/** Callback function type */
+typedef int (*speex_callback_func)(SpeexBits *bits, void *state, void *data);
+
+/** Callback information */
+typedef struct SpeexCallback {
+   int callback_id;             /**< ID associated to the callback */
+   speex_callback_func func;    /**< Callback handler function */
+   void *data;                  /**< Data that will be sent to the handler */
+   void *reserved1;             /**< Reserved for future use */
+   int   reserved2;             /**< Reserved for future use */
+} SpeexCallback;
+
+/** Handle in-band request */
+int speex_inband_handler(SpeexBits *bits, SpeexCallback *callback_list, void *state);
+
+/** Standard handler for mode request (change mode, no questions asked) */
+int speex_std_mode_request_handler(SpeexBits *bits, void *state, void *data);
+
+/** Standard handler for high mode request (change high mode, no questions asked) */
+int speex_std_high_mode_request_handler(SpeexBits *bits, void *state, void *data);
+
+/** Standard handler for in-band characters (write to stderr) */
+int speex_std_char_handler(SpeexBits *bits, void *state, void *data);
+
+/** Default handler for user-defined requests: in this case, just ignore */
+int speex_default_user_handler(SpeexBits *bits, void *state, void *data);
+
+
+
+
+int speex_std_low_mode_request_handler(SpeexBits *bits, void *state, void *data);
+
+int speex_std_vbr_request_handler(SpeexBits *bits, void *state, void *data);
+
+int speex_std_enh_request_handler(SpeexBits *bits, void *state, void *data);
+
+int speex_std_vbr_quality_request_handler(SpeexBits *bits, void *state, void *data);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif

Added: freeswitch/trunk/libs/speex/include/speex/speex_config_types.h.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/include/speex/speex_config_types.h.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,11 @@
+#ifndef __SPEEX_TYPES_H__
+#define __SPEEX_TYPES_H__
+
+/* these are filled in by configure */
+typedef @SIZE16@ spx_int16_t;
+typedef unsigned @SIZE16@ spx_uint16_t;
+typedef @SIZE32@ spx_int32_t;
+typedef unsigned @SIZE32@ spx_uint32_t;
+
+#endif
+

Added: freeswitch/trunk/libs/speex/include/speex/speex_echo.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/include/speex/speex_echo.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,88 @@
+/* Copyright (C) Jean-Marc Valin */
+/**
+   @file speex_echo.h
+   @brief Echo cancellation
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are
+   met:
+
+   1. Redistributions of source code must retain the above copyright notice,
+   this list of conditions and the following disclaimer.
+
+   2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   3. The name of the author may not be used to endorse or promote products
+   derived from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+   DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+   ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef SPEEX_ECHO_H
+#define SPEEX_ECHO_H
+
+#include "speex/speex_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Obtain frame size used by the AEC */
+#define SPEEX_ECHO_GET_FRAME_SIZE 3
+
+/** Set sampling rate */
+#define SPEEX_ECHO_SET_SAMPLING_RATE 24
+/** Get sampling rate */
+#define SPEEX_ECHO_GET_SAMPLING_RATE 25
+
+
+/*struct drft_lookup;*/
+struct SpeexEchoState_;
+
+typedef struct SpeexEchoState_ SpeexEchoState;
+
+/** Creates a new echo canceller state */
+SpeexEchoState *speex_echo_state_init(int frame_size, int filter_length);
+
+/** Destroys an echo canceller state */
+void speex_echo_state_destroy(SpeexEchoState *st);
+
+/** Performs echo cancellation a frame */
+void speex_echo_cancel(SpeexEchoState *st, const spx_int16_t *rec, const spx_int16_t *play, spx_int16_t *out, spx_int32_t *Yout);
+
+/** Perform echo cancellation using internal playback buffer */
+void speex_echo_capture(SpeexEchoState *st, const spx_int16_t *rec, spx_int16_t *out, spx_int32_t *Yout);
+
+/** Let the echo canceller know that a frame was just played */
+void speex_echo_playback(SpeexEchoState *st, const spx_int16_t *play);
+
+/** Reset the echo canceller state */
+void speex_echo_state_reset(SpeexEchoState *st);
+
+/** Used like the ioctl function to control the echo canceller parameters
+ *
+ * @param state Encoder state
+ * @param request ioctl-type request (one of the SPEEX_ECHO_* macros)
+ * @param ptr Data exchanged to-from function
+ * @return 0 if no error, -1 if request in unknown
+ */
+int speex_echo_ctl(SpeexEchoState *st, int request, void *ptr);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

Added: freeswitch/trunk/libs/speex/include/speex/speex_header.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/include/speex/speex_header.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,86 @@
+/* Copyright (C) 2002 Jean-Marc Valin */
+/**
+   @file speex_header.h
+   @brief Describes the Speex header
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+
+#ifndef SPEEX_HEADER_H
+#define SPEEX_HEADER_H
+
+#include "speex/speex_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct SpeexMode;
+
+#define SPEEX_HEADER_STRING_LENGTH 8
+
+/** Maximum number of characters for encoding the Speex version number in the header */
+#define SPEEX_HEADER_VERSION_LENGTH 20
+
+/** Speex header info for file-based formats */
+typedef struct SpeexHeader {
+   char speex_string[SPEEX_HEADER_STRING_LENGTH];   /**< Identifies a Speex bit-stream, always set to "Speex   " */
+   char speex_version[SPEEX_HEADER_VERSION_LENGTH]; /**< Speex version */ 
+   spx_int32_t speex_version_id;       /**< Version for Speex (for checking compatibility) */
+   spx_int32_t header_size;            /**< Total size of the header ( sizeof(SpeexHeader) ) */
+   spx_int32_t rate;                   /**< Sampling rate used */
+   spx_int32_t mode;                   /**< Mode used (0 for narrowband, 1 for wideband) */
+   spx_int32_t mode_bitstream_version; /**< Version ID of the bit-stream */
+   spx_int32_t nb_channels;            /**< Number of channels encoded */
+   spx_int32_t bitrate;                /**< Bit-rate used */
+   spx_int32_t frame_size;             /**< Size of frames */
+   spx_int32_t vbr;                    /**< 1 for a VBR encoding, 0 otherwise */
+   spx_int32_t frames_per_packet;      /**< Number of frames stored per Ogg packet */
+   spx_int32_t extra_headers;          /**< Number of additional headers after the comments */
+   spx_int32_t reserved1;              /**< Reserved for future use, must be zero */
+   spx_int32_t reserved2;              /**< Reserved for future use, must be zero */
+} SpeexHeader;
+
+/** Initializes a SpeexHeader using basic information */
+void speex_init_header(SpeexHeader *header, int rate, int nb_channels, const struct SpeexMode *m);
+
+/** Creates the header packet from the header itself (mostly involves endianness conversion) */
+char *speex_header_to_packet(SpeexHeader *header, int *size);
+
+/** Creates a SpeexHeader from a packet */
+SpeexHeader *speex_packet_to_header(char *packet, int size);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif

Added: freeswitch/trunk/libs/speex/include/speex/speex_jitter.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/include/speex/speex_jitter.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,117 @@
+/* Copyright (C) 2002 Jean-Marc Valin */
+/**
+   @file speex_jitter.h
+   @brief Adaptive jitter buffer for Speex
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifndef SPEEX_JITTER_H
+#define SPEEX_JITTER_H
+
+#include "speex.h"
+#include "speex_bits.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct JitterBuffer_;
+
+typedef struct JitterBuffer_ JitterBuffer;
+
+typedef struct _JitterBufferPacket JitterBufferPacket;
+
+struct _JitterBufferPacket {
+   char        *data;
+   spx_uint32_t len;
+   spx_uint32_t timestamp;
+   spx_uint32_t span;
+};
+
+
+#define JITTER_BUFFER_OK 0
+#define JITTER_BUFFER_MISSING 1
+#define JITTER_BUFFER_INCOMPLETE 2
+#define JITTER_BUFFER_INTERNAL_ERROR -1
+#define JITTER_BUFFER_BAD_ARGUMENT -2
+
+/** Initialise jitter buffer */
+JitterBuffer *jitter_buffer_init(int tick);
+
+/** Reset jitter buffer */
+void jitter_buffer_reset(JitterBuffer *jitter);
+
+/** Destroy jitter buffer */
+void jitter_buffer_destroy(JitterBuffer *jitter);
+
+/** Put one packet into the jitter buffer */
+void jitter_buffer_put(JitterBuffer *jitter, const JitterBufferPacket *packet);
+
+/** Get one packet from the jitter buffer */
+int jitter_buffer_get(JitterBuffer *jitter, JitterBufferPacket *packet, spx_uint32_t *current_timestamp);
+
+/** Get pointer timestamp of jitter buffer */
+int jitter_buffer_get_pointer_timestamp(JitterBuffer *jitter);
+
+/** Advance by one tick */
+void jitter_buffer_tick(JitterBuffer *jitter);
+
+
+/** Speex jitter-buffer state. */
+typedef struct SpeexJitter {
+   SpeexBits current_packet;                                              /**< Current Speex packet                */
+   int valid_bits;                                                        /**< True if Speex bits are valid        */
+   JitterBuffer *packets;
+   void *dec;                                                             /**< Pointer to Speex decoder            */
+   spx_int32_t frame_size;                                                        /**< Frame size of Speex decoder         */
+} SpeexJitter;
+
+/** Initialise jitter buffer */
+void speex_jitter_init(SpeexJitter *jitter, void *decoder, int sampling_rate);
+
+/** Destroy jitter buffer */
+void speex_jitter_destroy(SpeexJitter *jitter);
+
+/** Put one packet into the jitter buffer */
+void speex_jitter_put(SpeexJitter *jitter, char *packet, int len, int timestamp);
+
+/** Get one packet from the jitter buffer */
+void speex_jitter_get(SpeexJitter *jitter, spx_int16_t *out, int *start_offset);
+
+/** Get pointer timestamp of jitter buffer */
+int speex_jitter_get_pointer_timestamp(SpeexJitter *jitter);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif

Added: freeswitch/trunk/libs/speex/include/speex/speex_preprocess.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/include/speex/speex_preprocess.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,171 @@
+/* Copyright (C) 2003 Epic Games
+   Written by Jean-Marc Valin */
+/**
+   @file speex_preprocess.h
+   @brief Speex preprocessor
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are
+   met:
+
+   1. Redistributions of source code must retain the above copyright notice,
+   this list of conditions and the following disclaimer.
+
+   2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   3. The name of the author may not be used to endorse or promote products
+   derived from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+   DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+   ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef SPEEX_PREPROCESS_H
+#define SPEEX_PREPROCESS_H
+
+#include "speex/speex_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct drft_lookup;
+
+/** Speex pre-processor state. */
+typedef struct SpeexPreprocessState {
+   int    frame_size;        /**< Number of samples processed each time */
+   int    ps_size;           /**< Number of points in the power spectrum */
+   int    sampling_rate;     /**< Sampling rate of the input/output */
+   
+   /* parameters */
+   int    denoise_enabled;
+   int    agc_enabled;
+   float  agc_level;
+   int    vad_enabled;
+   int    dereverb_enabled;
+   float  reverb_decay;
+   float  reverb_level;
+   float  speech_prob_start;
+   float  speech_prob_continue;
+   
+   float *frame;             /**< Processing frame (2*ps_size) */
+   float *ps;                /**< Current power spectrum */
+   float *gain2;             /**< Adjusted gains */
+   float *window;            /**< Analysis/Synthesis window */
+   float *noise;             /**< Noise estimate */
+   float *reverb_estimate;   /**< Estimate of reverb energy */
+   float *old_ps;            /**< Power spectrum for last frame */
+   float *gain;              /**< Ephraim Malah gain */
+   float *prior;             /**< A-priori SNR */
+   float *post;              /**< A-posteriori SNR */
+
+   float *S;                 /**< Smoothed power spectrum */
+   float *Smin;              /**< See Cohen paper */
+   float *Stmp;              /**< See Cohen paper */
+   float *update_prob;       /**< Propability of speech presence for noise update */
+
+   float *zeta;              /**< Smoothed a priori SNR */
+   float  Zpeak;
+   float  Zlast;
+
+   float *loudness_weight;   /**< Perceptual loudness curve */
+
+   float *echo_noise;
+
+   float *noise_bands;
+   float *noise_bands2;
+   int    noise_bandsN;
+   float *speech_bands;
+   float *speech_bands2;
+   int    speech_bandsN;
+
+   float *inbuf;             /**< Input buffer (overlapped analysis) */
+   float *outbuf;            /**< Output buffer (for overlap and add) */
+
+   float  speech_prob;
+   int    last_speech;
+   float  loudness;          /**< loudness estimate */
+   float  loudness2;         /**< loudness estimate */
+   int    nb_adapt;          /**< Number of frames used for adaptation so far */
+   int    nb_loudness_adapt; /**< Number of frames used for loudness adaptation so far */
+   int    consec_noise;      /**< Number of consecutive noise frames */
+   int    nb_preprocess;     /**< Number of frames processed so far */
+   struct drft_lookup *fft_lookup;   /**< Lookup table for the FFT */
+
+} SpeexPreprocessState;
+
+/** Creates a new preprocessing state */
+SpeexPreprocessState *speex_preprocess_state_init(int frame_size, int sampling_rate);
+
+/** Destroys a denoising state */
+void speex_preprocess_state_destroy(SpeexPreprocessState *st);
+
+/** Preprocess a frame */
+int speex_preprocess(SpeexPreprocessState *st, spx_int16_t *x, spx_int32_t *echo);
+
+/** Preprocess a frame */
+void speex_preprocess_estimate_update(SpeexPreprocessState *st, spx_int16_t *x, spx_int32_t *echo);
+
+/** Used like the ioctl function to control the preprocessor parameters */
+int speex_preprocess_ctl(SpeexPreprocessState *st, int request, void *ptr);
+
+
+
+/** Set preprocessor denoiser state */
+#define SPEEX_PREPROCESS_SET_DENOISE 0
+/** Get preprocessor denoiser state */
+#define SPEEX_PREPROCESS_GET_DENOISE 1
+
+/** Set preprocessor Automatic Gain Control state */
+#define SPEEX_PREPROCESS_SET_AGC 2
+/** Get preprocessor Automatic Gain Control state */
+#define SPEEX_PREPROCESS_GET_AGC 3
+
+/** Set preprocessor Voice Activity Detection state */
+#define SPEEX_PREPROCESS_SET_VAD 4
+/** Get preprocessor Voice Activity Detection state */
+#define SPEEX_PREPROCESS_GET_VAD 5
+
+/** Set preprocessor Automatic Gain Control level */
+#define SPEEX_PREPROCESS_SET_AGC_LEVEL 6
+/** Get preprocessor Automatic Gain Control level */
+#define SPEEX_PREPROCESS_GET_AGC_LEVEL 7
+
+/** Set preprocessor dereverb state */
+#define SPEEX_PREPROCESS_SET_DEREVERB 8
+/** Get preprocessor dereverb state */
+#define SPEEX_PREPROCESS_GET_DEREVERB 9
+
+/** Set preprocessor dereverb level */
+#define SPEEX_PREPROCESS_SET_DEREVERB_LEVEL 10
+/** Get preprocessor dereverb level */
+#define SPEEX_PREPROCESS_GET_DEREVERB_LEVEL 11
+
+/** Set preprocessor dereverb decay */
+#define SPEEX_PREPROCESS_SET_DEREVERB_DECAY 12
+/** Get preprocessor dereverb decay */
+#define SPEEX_PREPROCESS_GET_DEREVERB_DECAY 13
+
+#define SPEEX_PREPROCESS_SET_PROB_START 14
+#define SPEEX_PREPROCESS_GET_PROB_START 15
+
+#define SPEEX_PREPROCESS_SET_PROB_CONTINUE 16
+#define SPEEX_PREPROCESS_GET_PROB_CONTINUE 17
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

Added: freeswitch/trunk/libs/speex/include/speex/speex_stereo.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/include/speex/speex_stereo.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,78 @@
+/* Copyright (C) 2002 Jean-Marc Valin*/
+/**
+   @file speex_stereo.h
+   @brief Describes the handling for intensity stereo
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef STEREO_H
+#define STEREO_H
+
+#include "speex/speex_types.h"
+#include "speex/speex_bits.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** State used for decoding (intensity) stereo information */
+typedef struct SpeexStereoState {
+   float balance;      /**< Left/right balance info */
+   float e_ratio;      /**< Ratio of energies: E(left+right)/[E(left)+E(right)]  */
+   float smooth_left;  /**< Smoothed left channel gain */
+   float smooth_right; /**< Smoothed right channel gain */
+   float reserved1;    /**< Reserved for future use */
+   float reserved2;    /**< Reserved for future use */
+} SpeexStereoState;
+
+/** Initialization value for a stereo state */
+#define SPEEX_STEREO_STATE_INIT {1,.5,1,1,0,0}
+
+/** Transforms a stereo frame into a mono frame and stores intensity stereo info in 'bits' */
+void speex_encode_stereo(float *data, int frame_size, SpeexBits *bits);
+
+/** Transforms a stereo frame into a mono frame and stores intensity stereo info in 'bits' */
+void speex_encode_stereo_int(spx_int16_t *data, int frame_size, SpeexBits *bits);
+
+/** Transforms a mono frame into a stereo frame using intensity stereo info */
+void speex_decode_stereo(float *data, int frame_size, SpeexStereoState *stereo);
+
+/** Transforms a mono frame into a stereo frame using intensity stereo info */
+void speex_decode_stereo_int(spx_int16_t *data, int frame_size, SpeexStereoState *stereo);
+
+/** Callback handler for intensity stereo info */
+int speex_std_stereo_request_handler(SpeexBits *bits, void *state, void *data);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif

Added: freeswitch/trunk/libs/speex/include/speex/speex_types.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/include/speex/speex_types.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,126 @@
+/* speex_types.h taken from libogg */
+/********************************************************************
+ *                                                                  *
+ * THIS FILE IS PART OF THE OggVorbis SOFTWARE CODEC SOURCE CODE.   *
+ * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS     *
+ * GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE *
+ * IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING.       *
+ *                                                                  *
+ * THE OggVorbis SOURCE CODE IS (C) COPYRIGHT 1994-2002             *
+ * by the Xiph.Org Foundation http://www.xiph.org/                  *
+ *                                                                  *
+ ********************************************************************
+
+ function: #ifdef jail to whip a few platforms into the UNIX ideal.
+ last mod: $Id: os_types.h 7524 2004-08-11 04:20:36Z conrad $
+
+ ********************************************************************/
+/**
+   @file speex_types.h
+   @brief Speex types
+*/
+#ifndef _SPEEX_TYPES_H
+#define _SPEEX_TYPES_H
+
+#if defined(_WIN32) 
+
+#  if defined(__CYGWIN__)
+#    include <_G_config.h>
+     typedef _G_int32_t spx_int32_t;
+     typedef _G_uint32_t spx_uint32_t;
+     typedef _G_int16_t spx_int16_t;
+     typedef _G_uint16_t spx_uint16_t;
+#  elif defined(__MINGW32__)
+     typedef short spx_int16_t;                                                                             
+     typedef unsigned short spx_uint16_t;                                                                   
+     typedef int spx_int32_t;                                                                               
+     typedef unsigned int spx_uint32_t;                                                                     
+#  elif defined(__MWERKS__)
+     typedef int spx_int32_t;
+     typedef unsigned int spx_uint32_t;
+     typedef short spx_int16_t;
+     typedef unsigned short spx_uint16_t;
+#  else
+     /* MSVC/Borland */
+     typedef __int32 spx_int32_t;
+     typedef unsigned __int32 spx_uint32_t;
+     typedef __int16 spx_int16_t;
+     typedef unsigned __int16 spx_uint16_t;
+#  endif
+
+#elif defined(__MACOS__)
+
+#  include <sys/types.h>
+   typedef SInt16 spx_int16_t;
+   typedef UInt16 spx_uint16_t;
+   typedef SInt32 spx_int32_t;
+   typedef UInt32 spx_uint32_t;
+
+#elif defined(__MACOSX__) /* MacOS X Framework build */
+
+#  include <sys/types.h>
+   typedef int16_t spx_int16_t;
+   typedef u_int16_t spx_uint16_t;
+   typedef int32_t spx_int32_t;
+   typedef u_int32_t spx_uint32_t;
+
+#elif defined(__BEOS__)
+
+   /* Be */
+#  include <inttypes.h>
+   typedef int16_t spx_int16_t;
+   typedef u_int16_t spx_uint16_t;
+   typedef int32_t spx_int32_t;
+   typedef u_int32_t spx_uint32_t;
+
+#elif defined (__EMX__)
+
+   /* OS/2 GCC */
+   typedef short spx_int16_t;
+   typedef unsigned short spx_uint16_t;
+   typedef int spx_int32_t;
+   typedef unsigned int spx_uint32_t;
+
+#elif defined (DJGPP)
+
+   /* DJGPP */
+   typedef short spx_int16_t;
+   typedef int spx_int32_t;
+   typedef unsigned int spx_uint32_t;
+
+#elif defined(R5900)
+
+   /* PS2 EE */
+   typedef int spx_int32_t;
+   typedef unsigned spx_uint32_t;
+   typedef short spx_int16_t;
+
+#elif defined(__SYMBIAN32__)
+
+   /* Symbian GCC */
+   typedef signed short spx_int16_t;
+   typedef unsigned short spx_uint16_t;
+   typedef signed int spx_int32_t;
+   typedef unsigned int spx_uint32_t;
+
+#elif defined(CONFIG_TI_C54X) || defined (CONFIG_TI_C55X)
+
+   typedef short spx_int16_t;
+   typedef unsigned short spx_uint16_t;
+   typedef long spx_int32_t;
+   typedef unsigned long spx_uint32_t;
+
+#elif defined(CONFIG_TI_C6X)
+
+   typedef short spx_int16_t;
+   typedef unsigned short spx_uint16_t;
+   typedef int spx_int32_t;
+   typedef unsigned int spx_uint32_t;
+
+#else
+
+#  include <speex/speex_config_types.h>
+
+#endif
+
+#endif  /* _SPEEX_TYPES_H */

Added: freeswitch/trunk/libs/speex/install-sh
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/install-sh	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,325 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2004-04-01.17
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=
+transform_arg=
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+
+usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 -d DIRECTORIES...
+
+In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
+In the second, create the directory path DIR.
+
+Options:
+-b=TRANSFORMBASENAME
+-c         copy source (using $cpprog) instead of moving (using $mvprog).
+-d         create directories instead of installing files.
+-g GROUP   $chgrp installed files to GROUP.
+-m MODE    $chmod installed files to MODE.
+-o USER    $chown installed files to USER.
+-s         strip installed files (using $stripprog).
+-t=TRANSFORM
+--help     display this help and exit.
+--version  display version info and exit.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+  case $1 in
+    -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+        shift
+        continue;;
+
+    -c) instcmd=$cpprog
+        shift
+        continue;;
+
+    -d) dir_arg=true
+        shift
+        continue;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift
+        shift
+        continue;;
+
+    --help) echo "$usage"; exit 0;;
+
+    -m) chmodcmd="$chmodprog $2"
+        shift
+        shift
+        continue;;
+
+    -o) chowncmd="$chownprog $2"
+        shift
+        shift
+        continue;;
+
+    -s) stripcmd=$stripprog
+        shift
+        continue;;
+
+    -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+        shift
+        continue;;
+
+    --version) echo "$0 $scriptversion"; exit 0;;
+
+    *)  # When -d is used, all remaining arguments are directories to create.
+	test -n "$dir_arg" && break
+        # Otherwise, the last argument is the destination.  Remove it from $@.
+	for arg
+	do
+          if test -n "$dstarg"; then
+	    # $@ is not empty: it contains at least $arg.
+	    set fnord "$@" "$dstarg"
+	    shift # fnord
+	  fi
+	  shift # arg
+	  dstarg=$arg
+	done
+	break;;
+  esac
+done
+
+if test -z "$1"; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src ;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    src=
+
+    if test -d "$dst"; then
+      instcmd=:
+      chmodcmd=
+    else
+      instcmd=$mkdirprog
+    fi
+  else
+    # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dstarg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dstarg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst ;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      dst=$dst/`basename "$src"`
+    fi
+  fi
+
+  # This sed command emulates the dirname command.
+  dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+  # Make sure that the destination directory exists.
+
+  # Skip lots of stat calls in the usual case.
+  if test ! -d "$dstdir"; then
+    defaultIFS='
+	 '
+    IFS="${IFS-$defaultIFS}"
+
+    oIFS=$IFS
+    # Some sh's can't handle IFS=/ for some reason.
+    IFS='%'
+    set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+    IFS=$oIFS
+
+    pathcomp=
+
+    while test $# -ne 0 ; do
+      pathcomp=$pathcomp$1
+      shift
+      if test ! -d "$pathcomp"; then
+        $mkdirprog "$pathcomp" || lasterr=$?
+	# mkdir can fail with a `File exist' error in case several
+	# install-sh are creating the directory concurrently.  This
+	# is OK.
+	test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; }
+      fi
+      pathcomp=$pathcomp/
+    done
+  fi
+
+  if test -n "$dir_arg"; then
+    $doit $instcmd "$dst" \
+      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+  else
+    # If we're going to rename the final executable, determine the name now.
+    if test -z "$transformarg"; then
+      dstfile=`basename "$dst"`
+    else
+      dstfile=`basename "$dst" $transformbasename \
+               | sed $transformarg`$transformbasename
+    fi
+
+    # don't allow the sed command to completely eliminate the filename.
+    test -z "$dstfile" && dstfile=`basename "$dst"`
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+    trap '(exit $?); exit' 1 2 13 15
+
+    # Move or copy the file name to the temp name
+    $doit $instcmd "$src" "$dsttmp" &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $instcmd $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+    # Now rename the file to the real destination.
+    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+      || {
+	   # The rename failed, perhaps because mv can't rename something else
+	   # to itself, or perhaps because mv is so ancient that it does not
+	   # support -f.
+
+	   # Now remove or move aside any old file at destination location.
+	   # We try this two ways since rm can't unlink itself on some
+	   # systems and the destination file might be busy for other
+	   # reasons.  In this case, the final cleanup might fail but the new
+	   # file should still install successfully.
+	   {
+	     if test -f "$dstdir/$dstfile"; then
+	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+	       || {
+		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		 (exit 1); exit
+	       }
+	     else
+	       :
+	     fi
+	   } &&
+
+	   # Now rename the file to the real destination.
+	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+	 }
+    }
+  fi || { (exit 1); exit; }
+done
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+  (exit 0); exit
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

Added: freeswitch/trunk/libs/speex/libspeex/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,42 @@
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+
+EXTRA_DIST=testenc.c testenc_wb.c testenc_uwb.c testdenoise.c testecho.c
+
+INCLUDES = -I$(top_srcdir)/include -I$(top_builddir)/include -I$(top_builddir) @OGG_CFLAGS@
+
+lib_LTLIBRARIES = libspeex.la
+
+# Sources for compilation in the library
+libspeex_la_SOURCES = nb_celp.c 	sb_celp.c 	lpc.c 	ltp.c 	lsp.c 	quant_lsp.c \
+				lsp_tables_nb.c 	gain_table.c 	gain_table_lbr.c 	cb_search.c 	filters.c 	bits.c \
+				modes.c 	speex.c 	vq.c 	high_lsp_tables.c 	vbr.c 	hexc_table.c \
+				exc_5_256_table.c 	exc_5_64_table.c 	exc_8_128_table.c 	exc_10_32_table.c \
+				exc_10_16_table.c 	exc_20_32_table.c 	hexc_10_32_table.c 	misc.c 	speex_header.c \
+				speex_callbacks.c 	math_approx.c 	stereo.c 	preprocess.c 	smallft.c 	lbr_48k_tables.c \
+				jitter.c 	mdf.c vorbis_psy.c fftwrap.c kiss_fft.c _kiss_fft_guts.h kiss_fft.h \
+	kiss_fftr.c kiss_fftr.h window.c
+
+noinst_HEADERS = lsp.h 	nb_celp.h 	lpc.h 	lpc_bfin.h 	ltp.h 	quant_lsp.h \
+				cb_search.h 	filters.h 	stack_alloc.h 	vq.h 	vq_sse.h 	vq_arm4.h 	vq_bfin.h \
+				modes.h 	sb_celp.h 	vbr.h 	misc.h 	misc_bfin.h 	ltp_sse.h 	ltp_arm4.h \
+				ltp_bfin.h 	filters_sse.h 	filters_arm4.h 	filters_bfin.h 	math_approx.h \
+				smallft.h 	arch.h 	fixed_arm4.h 	fixed_arm5e.h 	fixed_bfin.h 	fixed_debug.h \
+				fixed_generic.h 	cb_search_sse.h 	cb_search_arm4.h 	cb_search_bfin.h vorbis_psy.h \
+		fftwrap.h pseudofloat.h lsp_bfin.h quant_lsp_bfin.h
+
+
+libspeex_la_LDFLAGS = -no-undefined -version-info @SPEEX_LT_CURRENT@:@SPEEX_LT_REVISION@:@SPEEX_LT_AGE@
+
+noinst_PROGRAMS = testenc testenc_wb testenc_uwb testdenoise testecho
+testenc_SOURCES = testenc.c
+testenc_LDADD = $(top_builddir)/libspeex/libspeex.la
+testenc_wb_SOURCES = testenc_wb.c
+testenc_wb_LDADD = $(top_builddir)/libspeex/libspeex.la
+testenc_uwb_SOURCES = testenc_uwb.c
+testenc_uwb_LDADD = $(top_builddir)/libspeex/libspeex.la
+testdenoise_SOURCES = testdenoise.c
+testdenoise_LDADD = $(top_builddir)/libspeex/libspeex.la
+testecho_SOURCES = testecho.c
+testecho_LDADD = $(top_builddir)/libspeex/libspeex.la

Added: freeswitch/trunk/libs/speex/libspeex/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,623 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+
+
+SOURCES = $(libspeex_la_SOURCES) $(testdenoise_SOURCES) $(testecho_SOURCES) $(testenc_SOURCES) $(testenc_uwb_SOURCES) $(testenc_wb_SOURCES)
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+noinst_PROGRAMS = testenc$(EXEEXT) testenc_wb$(EXEEXT) \
+	testenc_uwb$(EXEEXT) testdenoise$(EXEEXT) testecho$(EXEEXT)
+subdir = libspeex
+DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+am__installdirs = "$(DESTDIR)$(libdir)"
+libLTLIBRARIES_INSTALL = $(INSTALL)
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libspeex_la_LIBADD =
+am_libspeex_la_OBJECTS = nb_celp.lo sb_celp.lo lpc.lo ltp.lo lsp.lo \
+	quant_lsp.lo lsp_tables_nb.lo gain_table.lo gain_table_lbr.lo \
+	cb_search.lo filters.lo bits.lo modes.lo speex.lo vq.lo \
+	high_lsp_tables.lo vbr.lo hexc_table.lo exc_5_256_table.lo \
+	exc_5_64_table.lo exc_8_128_table.lo exc_10_32_table.lo \
+	exc_10_16_table.lo exc_20_32_table.lo hexc_10_32_table.lo \
+	misc.lo speex_header.lo speex_callbacks.lo math_approx.lo \
+	stereo.lo preprocess.lo smallft.lo lbr_48k_tables.lo jitter.lo \
+	mdf.lo vorbis_psy.lo fftwrap.lo kiss_fft.lo kiss_fftr.lo \
+	window.lo
+libspeex_la_OBJECTS = $(am_libspeex_la_OBJECTS)
+PROGRAMS = $(noinst_PROGRAMS)
+am_testdenoise_OBJECTS = testdenoise.$(OBJEXT)
+testdenoise_OBJECTS = $(am_testdenoise_OBJECTS)
+testdenoise_DEPENDENCIES = $(top_builddir)/libspeex/libspeex.la
+am_testecho_OBJECTS = testecho.$(OBJEXT)
+testecho_OBJECTS = $(am_testecho_OBJECTS)
+testecho_DEPENDENCIES = $(top_builddir)/libspeex/libspeex.la
+am_testenc_OBJECTS = testenc.$(OBJEXT)
+testenc_OBJECTS = $(am_testenc_OBJECTS)
+testenc_DEPENDENCIES = $(top_builddir)/libspeex/libspeex.la
+am_testenc_uwb_OBJECTS = testenc_uwb.$(OBJEXT)
+testenc_uwb_OBJECTS = $(am_testenc_uwb_OBJECTS)
+testenc_uwb_DEPENDENCIES = $(top_builddir)/libspeex/libspeex.la
+am_testenc_wb_OBJECTS = testenc_wb.$(OBJEXT)
+testenc_wb_OBJECTS = $(am_testenc_wb_OBJECTS)
+testenc_wb_DEPENDENCIES = $(top_builddir)/libspeex/libspeex.la
+DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+ at AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/bits.Plo ./$(DEPDIR)/cb_search.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/exc_10_16_table.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/exc_10_32_table.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/exc_20_32_table.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/exc_5_256_table.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/exc_5_64_table.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/exc_8_128_table.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/fftwrap.Plo ./$(DEPDIR)/filters.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/gain_table.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/gain_table_lbr.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/hexc_10_32_table.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/hexc_table.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/high_lsp_tables.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/jitter.Plo ./$(DEPDIR)/kiss_fft.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/kiss_fftr.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/lbr_48k_tables.Plo ./$(DEPDIR)/lpc.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/lsp.Plo ./$(DEPDIR)/lsp_tables_nb.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/ltp.Plo ./$(DEPDIR)/math_approx.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/mdf.Plo ./$(DEPDIR)/misc.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/modes.Plo ./$(DEPDIR)/nb_celp.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/preprocess.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/quant_lsp.Plo ./$(DEPDIR)/sb_celp.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/smallft.Plo ./$(DEPDIR)/speex.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/speex_callbacks.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/speex_header.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/stereo.Plo ./$(DEPDIR)/testdenoise.Po \
+ at AMDEP_TRUE@	./$(DEPDIR)/testecho.Po ./$(DEPDIR)/testenc.Po \
+ at AMDEP_TRUE@	./$(DEPDIR)/testenc_uwb.Po \
+ at AMDEP_TRUE@	./$(DEPDIR)/testenc_wb.Po ./$(DEPDIR)/vbr.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/vorbis_psy.Plo ./$(DEPDIR)/vq.Plo \
+ at AMDEP_TRUE@	./$(DEPDIR)/window.Plo
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(libspeex_la_SOURCES) $(testdenoise_SOURCES) \
+	$(testecho_SOURCES) $(testenc_SOURCES) $(testenc_uwb_SOURCES) \
+	$(testenc_wb_SOURCES)
+DIST_SOURCES = $(libspeex_la_SOURCES) $(testdenoise_SOURCES) \
+	$(testecho_SOURCES) $(testenc_SOURCES) $(testenc_uwb_SOURCES) \
+	$(testenc_wb_SOURCES)
+HEADERS = $(noinst_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = testenc.c testenc_wb.c testenc_uwb.c testdenoise.c testecho.c
+INCLUDES = -I$(top_srcdir)/include -I$(top_builddir)/include -I$(top_builddir) @OGG_CFLAGS@
+lib_LTLIBRARIES = libspeex.la
+
+# Sources for compilation in the library
+libspeex_la_SOURCES = nb_celp.c 	sb_celp.c 	lpc.c 	ltp.c 	lsp.c 	quant_lsp.c \
+				lsp_tables_nb.c 	gain_table.c 	gain_table_lbr.c 	cb_search.c 	filters.c 	bits.c \
+				modes.c 	speex.c 	vq.c 	high_lsp_tables.c 	vbr.c 	hexc_table.c \
+				exc_5_256_table.c 	exc_5_64_table.c 	exc_8_128_table.c 	exc_10_32_table.c \
+				exc_10_16_table.c 	exc_20_32_table.c 	hexc_10_32_table.c 	misc.c 	speex_header.c \
+				speex_callbacks.c 	math_approx.c 	stereo.c 	preprocess.c 	smallft.c 	lbr_48k_tables.c \
+				jitter.c 	mdf.c vorbis_psy.c fftwrap.c kiss_fft.c _kiss_fft_guts.h kiss_fft.h \
+	kiss_fftr.c kiss_fftr.h window.c
+
+noinst_HEADERS = lsp.h 	nb_celp.h 	lpc.h 	lpc_bfin.h 	ltp.h 	quant_lsp.h \
+				cb_search.h 	filters.h 	stack_alloc.h 	vq.h 	vq_sse.h 	vq_arm4.h 	vq_bfin.h \
+				modes.h 	sb_celp.h 	vbr.h 	misc.h 	misc_bfin.h 	ltp_sse.h 	ltp_arm4.h \
+				ltp_bfin.h 	filters_sse.h 	filters_arm4.h 	filters_bfin.h 	math_approx.h \
+				smallft.h 	arch.h 	fixed_arm4.h 	fixed_arm5e.h 	fixed_bfin.h 	fixed_debug.h \
+				fixed_generic.h 	cb_search_sse.h 	cb_search_arm4.h 	cb_search_bfin.h vorbis_psy.h \
+		fftwrap.h pseudofloat.h lsp_bfin.h quant_lsp_bfin.h
+
+libspeex_la_LDFLAGS = -no-undefined -version-info @SPEEX_LT_CURRENT@:@SPEEX_LT_REVISION@:@SPEEX_LT_AGE@
+testenc_SOURCES = testenc.c
+testenc_LDADD = $(top_builddir)/libspeex/libspeex.la
+testenc_wb_SOURCES = testenc_wb.c
+testenc_wb_LDADD = $(top_builddir)/libspeex/libspeex.la
+testenc_uwb_SOURCES = testenc_uwb.c
+testenc_uwb_LDADD = $(top_builddir)/libspeex/libspeex.la
+testdenoise_SOURCES = testdenoise.c
+testdenoise_LDADD = $(top_builddir)/libspeex/libspeex.la
+testecho_SOURCES = testecho.c
+testecho_LDADD = $(top_builddir)/libspeex/libspeex.la
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  libspeex/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  libspeex/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    f="`echo $$p | sed -e 's|^.*/||'`"; \
+	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
+	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
+	  else :; fi; \
+	done
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	    p="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
+	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libspeex.la: $(libspeex_la_OBJECTS) $(libspeex_la_DEPENDENCIES) 
+	$(LINK) -rpath $(libdir) $(libspeex_la_LDFLAGS) $(libspeex_la_OBJECTS) $(libspeex_la_LIBADD) $(LIBS)
+
+clean-noinstPROGRAMS:
+	@list='$(noinst_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  echo " rm -f $$p $$f"; \
+	  rm -f $$p $$f ; \
+	done
+testdenoise$(EXEEXT): $(testdenoise_OBJECTS) $(testdenoise_DEPENDENCIES) 
+	@rm -f testdenoise$(EXEEXT)
+	$(LINK) $(testdenoise_LDFLAGS) $(testdenoise_OBJECTS) $(testdenoise_LDADD) $(LIBS)
+testecho$(EXEEXT): $(testecho_OBJECTS) $(testecho_DEPENDENCIES) 
+	@rm -f testecho$(EXEEXT)
+	$(LINK) $(testecho_LDFLAGS) $(testecho_OBJECTS) $(testecho_LDADD) $(LIBS)
+testenc$(EXEEXT): $(testenc_OBJECTS) $(testenc_DEPENDENCIES) 
+	@rm -f testenc$(EXEEXT)
+	$(LINK) $(testenc_LDFLAGS) $(testenc_OBJECTS) $(testenc_LDADD) $(LIBS)
+testenc_uwb$(EXEEXT): $(testenc_uwb_OBJECTS) $(testenc_uwb_DEPENDENCIES) 
+	@rm -f testenc_uwb$(EXEEXT)
+	$(LINK) $(testenc_uwb_LDFLAGS) $(testenc_uwb_OBJECTS) $(testenc_uwb_LDADD) $(LIBS)
+testenc_wb$(EXEEXT): $(testenc_wb_OBJECTS) $(testenc_wb_DEPENDENCIES) 
+	@rm -f testenc_wb$(EXEEXT)
+	$(LINK) $(testenc_wb_LDFLAGS) $(testenc_wb_OBJECTS) $(testenc_wb_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/bits.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/cb_search.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/exc_10_16_table.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/exc_10_32_table.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/exc_20_32_table.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/exc_5_256_table.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/exc_5_64_table.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/exc_8_128_table.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/fftwrap.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/filters.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/gain_table.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/gain_table_lbr.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/hexc_10_32_table.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/hexc_table.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/high_lsp_tables.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/jitter.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/kiss_fft.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/kiss_fftr.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/lbr_48k_tables.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/lpc.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/lsp.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/lsp_tables_nb.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/ltp.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/math_approx.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/mdf.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/misc.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/modes.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/nb_celp.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/preprocess.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/quant_lsp.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/sb_celp.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/smallft.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/speex.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/speex_callbacks.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/speex_header.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/stereo.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/testdenoise.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/testecho.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/testenc.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/testenc_uwb.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/testenc_wb.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/vbr.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/vorbis_psy.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/vq.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/window.Plo at am__quote@
+
+.c.o:
+ at am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+ at am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@	$(COMPILE) -c $<
+
+.c.obj:
+ at am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
+ at am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+ at am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+ at am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(HEADERS)
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)"; do \
+	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
+	clean-noinstPROGRAMS mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am: install-libLTLIBRARIES
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+	clean-libLTLIBRARIES clean-libtool clean-noinstPROGRAMS ctags \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-exec install-exec-am install-info \
+	install-info-am install-libLTLIBRARIES install-man \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	pdf pdf-am ps ps-am tags uninstall uninstall-am \
+	uninstall-info-am uninstall-libLTLIBRARIES
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/libspeex/_kiss_fft_guts.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/_kiss_fft_guts.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,147 @@
+/*
+Copyright (c) 2003-2004, Mark Borgerding
+
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
+    * Neither the author nor the names of any contributors may be used to endorse or promote products derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#define MIN(a,b) ((a)<(b) ? (a):(b))
+#define MAX(a,b) ((a)>(b) ? (a):(b))
+
+/* kiss_fft.h
+   defines kiss_fft_scalar as either short or a float type
+   and defines
+   typedef struct { kiss_fft_scalar r; kiss_fft_scalar i; }kiss_fft_cpx; */
+#include "kiss_fft.h"
+
+#define MAXFACTORS 32
+/* e.g. an fft of length 128 has 4 factors 
+ as far as kissfft is concerned
+ 4*4*4*2
+ */
+
+struct kiss_fft_state{
+    int nfft;
+    int inverse;
+    int factors[2*MAXFACTORS];
+    kiss_fft_cpx twiddles[1];
+};
+
+/*
+  Explanation of macros dealing with complex math:
+
+   C_MUL(m,a,b)         : m = a*b
+   C_FIXDIV( c , div )  : if a fixed point impl., c /= div. noop otherwise
+   C_SUB( res, a,b)     : res = a - b
+   C_SUBFROM( res , a)  : res -= a
+   C_ADDTO( res , a)    : res += a
+ * */
+#ifdef FIXED_POINT
+#include "misc.h"
+# define FRACBITS 15
+# define SAMPPROD spx_int32_t 
+#define SAMP_MAX 32767
+
+#define SAMP_MIN -SAMP_MAX
+
+#if defined(CHECK_OVERFLOW)
+#  define CHECK_OVERFLOW_OP(a,op,b)  \
+	if ( (SAMPPROD)(a) op (SAMPPROD)(b) > SAMP_MAX || (SAMPPROD)(a) op (SAMPPROD)(b) < SAMP_MIN ) { \
+		fprintf(stderr,"WARNING:overflow @ " __FILE__ "(%d): (%d " #op" %d) = %ld\n",__LINE__,(a),(b),(SAMPPROD)(a) op (SAMPPROD)(b) );  }
+#endif
+
+
+#   define smul(a,b) ( (SAMPPROD)(a)*(b) )
+#   define sround( x )  (kiss_fft_scalar)( ( (x) + (1<<(FRACBITS-1)) ) >> FRACBITS )
+
+#   define S_MUL(a,b) sround( smul(a,b) )
+
+#   define C_MUL(m,a,b) \
+      do{ (m).r = sround( smul((a).r,(b).r) - smul((a).i,(b).i) ); \
+          (m).i = sround( smul((a).r,(b).i) + smul((a).i,(b).r) ); }while(0)
+
+#   define DIVSCALAR(x,k) \
+	(x) = sround( smul(  x, SAMP_MAX/k ) )
+
+#   define C_FIXDIV(c,div) \
+	do {    DIVSCALAR( (c).r , div);  \
+		DIVSCALAR( (c).i  , div); }while (0)
+
+#   define C_MULBYSCALAR( c, s ) \
+    do{ (c).r =  sround( smul( (c).r , s ) ) ;\
+        (c).i =  sround( smul( (c).i , s ) ) ; }while(0)
+
+#else  /* not FIXED_POINT*/
+
+#   define S_MUL(a,b) ( (a)*(b) )
+#define C_MUL(m,a,b) \
+    do{ (m).r = (a).r*(b).r - (a).i*(b).i;\
+        (m).i = (a).r*(b).i + (a).i*(b).r; }while(0)
+#   define C_FIXDIV(c,div) /* NOOP */
+#   define C_MULBYSCALAR( c, s ) \
+    do{ (c).r *= (s);\
+        (c).i *= (s); }while(0)
+#endif
+
+#ifndef CHECK_OVERFLOW_OP
+#  define CHECK_OVERFLOW_OP(a,op,b) /* noop */
+#endif
+
+#define  C_ADD( res, a,b)\
+    do { \
+	    CHECK_OVERFLOW_OP((a).r,+,(b).r)\
+	    CHECK_OVERFLOW_OP((a).i,+,(b).i)\
+	    (res).r=(a).r+(b).r;  (res).i=(a).i+(b).i; \
+    }while(0)
+#define  C_SUB( res, a,b)\
+    do { \
+	    CHECK_OVERFLOW_OP((a).r,-,(b).r)\
+	    CHECK_OVERFLOW_OP((a).i,-,(b).i)\
+	    (res).r=(a).r-(b).r;  (res).i=(a).i-(b).i; \
+    }while(0)
+#define C_ADDTO( res , a)\
+    do { \
+	    CHECK_OVERFLOW_OP((res).r,+,(a).r)\
+	    CHECK_OVERFLOW_OP((res).i,+,(a).i)\
+	    (res).r += (a).r;  (res).i += (a).i;\
+    }while(0)
+
+#define C_SUBFROM( res , a)\
+    do {\
+	    CHECK_OVERFLOW_OP((res).r,-,(a).r)\
+	    CHECK_OVERFLOW_OP((res).i,-,(a).i)\
+	    (res).r -= (a).r;  (res).i -= (a).i; \
+    }while(0)
+
+
+#ifdef FIXED_POINT
+#  define KISS_FFT_COS(phase)  floor(MIN(32767,MAX(-32767,.5+32768 * cos (phase))))
+#  define KISS_FFT_SIN(phase)  floor(MIN(32767,MAX(-32767,.5+32768 * sin (phase))))
+#  define HALF_OF(x) ((x)>>1)
+#elif defined(USE_SIMD)
+#  define KISS_FFT_COS(phase) _mm_set1_ps( cos(phase) )
+#  define KISS_FFT_SIN(phase) _mm_set1_ps( sin(phase) )
+#  define HALF_OF(x) ((x)*_mm_set1_ps(.5))
+#else
+#  define KISS_FFT_COS(phase) (kiss_fft_scalar) cos(phase)
+#  define KISS_FFT_SIN(phase) (kiss_fft_scalar) sin(phase)
+#  define HALF_OF(x) ((x)*.5)
+#endif
+
+#define  kf_cexp(x,phase) \
+	do{ \
+		(x)->r = KISS_FFT_COS(phase);\
+		(x)->i = KISS_FFT_SIN(phase);\
+	}while(0)
+
+
+/* a debugging function */
+#define pcpx(c)\
+    fprintf(stderr,"%g + %gi\n",(double)((c)->r),(double)((c)->i) )

Added: freeswitch/trunk/libs/speex/libspeex/arch.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/arch.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,189 @@
+/* Copyright (C) 2003 Jean-Marc Valin */
+/**
+   @file arch.h
+   @brief Various architecture definitions Speex
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef ARCH_H
+#define ARCH_H
+
+#include "speex/speex_types.h"
+
+#define ABS(x) ((x) < 0 ? (-(x)) : (x))      /**< Absolute integer value. */
+#define ABS16(x) ((x) < 0 ? (-(x)) : (x))    /**< Absolute 16-bit value.  */
+#define MAX16(a,b) ((a) > (b) ? (a) : (b))   /**< Maximum 16-bit value.   */
+#define ABS32(x) ((x) < 0 ? (-(x)) : (x))    /**< Absolute 32-bit value.  */
+#define MAX32(a,b) ((a) > (b) ? (a) : (b))   /**< Maximum 32-bit value.   */
+
+#ifdef FIXED_POINT
+
+typedef spx_int16_t spx_word16_t;
+typedef spx_int32_t   spx_word32_t;
+typedef spx_word32_t spx_mem_t;
+typedef spx_word16_t spx_coef_t;
+typedef spx_word16_t spx_lsp_t;
+typedef spx_word32_t spx_sig_t;
+
+#define Q15ONE 32767
+
+#define LPC_SCALING  8192
+#define SIG_SCALING  16384
+#define LSP_SCALING  8192.
+#define GAMMA_SCALING 32768.
+#define GAIN_SCALING 64
+#define GAIN_SCALING_1 0.015625
+
+#define LPC_SHIFT    13
+#define LSP_SHIFT    13
+#define SIG_SHIFT    14
+
+#define VERY_SMALL 0
+#define VERY_LARGE32 ((spx_word32_t)2147483647)
+#define VERY_LARGE16 ((spx_word16_t)32767)
+
+
+#ifdef FIXED_DEBUG
+#include "fixed_debug.h"
+#else
+
+#include "fixed_generic.h"
+
+#ifdef ARM5E_ASM
+#include "fixed_arm5e.h"
+#elif defined (ARM4_ASM)
+#include "fixed_arm4.h"
+#elif defined (ARM5E_ASM)
+#include "fixed_arm5e.h"
+#elif defined (BFIN_ASM)
+#include "fixed_bfin.h"
+#endif
+
+#endif
+
+
+#else
+
+typedef float spx_mem_t;
+typedef float spx_coef_t;
+typedef float spx_lsp_t;
+typedef float spx_sig_t;
+typedef float spx_word16_t;
+typedef float spx_word32_t;
+
+#define Q15ONE 1.0f
+#define LPC_SCALING  1.f
+#define SIG_SCALING  1.f
+#define LSP_SCALING  1.f
+#define GAMMA_SCALING 1.f
+#define GAIN_SCALING 1.f
+#define GAIN_SCALING_1 1.f
+
+#define LPC_SHIFT    0
+#define LSP_SHIFT    0
+#define SIG_SHIFT    0
+
+#define VERY_SMALL 1e-15f
+#define VERY_LARGE32 1e15f
+#define VERY_LARGE16 1e15f
+
+#define QCONST16(x,bits) (x)
+#define QCONST32(x,bits) (x)
+
+#define NEG16(x) (-(x))
+#define NEG32(x) (-(x))
+#define EXTRACT16(x) (x)
+#define EXTEND32(x) (x)
+#define SHR16(a,shift) (a)
+#define SHL16(a,shift) (a)
+#define SHR32(a,shift) (a)
+#define SHL32(a,shift) (a)
+#define PSHR16(a,shift) (a)
+#define PSHR32(a,shift) (a)
+#define SATURATE16(x,a) (x)
+#define SATURATE32(x,a) (x)
+
+#define PSHR(a,shift)       (a)
+#define SHR(a,shift)       (a)
+#define SHL(a,shift)       (a)
+#define SATURATE(x,a) (x)
+
+#define ADD16(a,b) ((a)+(b))
+#define SUB16(a,b) ((a)-(b))
+#define ADD32(a,b) ((a)+(b))
+#define SUB32(a,b) ((a)-(b))
+#define MULT16_16_16(a,b)     ((a)*(b))
+#define MULT16_16(a,b)     ((spx_word32_t)(a)*(spx_word32_t)(b))
+#define MAC16_16(c,a,b)     ((c)+(spx_word32_t)(a)*(spx_word32_t)(b))
+
+#define MULT16_32_Q11(a,b)     ((a)*(b))
+#define MULT16_32_Q13(a,b)     ((a)*(b))
+#define MULT16_32_Q14(a,b)     ((a)*(b))
+#define MULT16_32_Q15(a,b)     ((a)*(b))
+
+#define MAC16_32_Q11(c,a,b)     ((c)+(a)*(b))
+#define MAC16_32_Q15(c,a,b)     ((c)+(a)*(b))
+
+#define MAC16_16_Q11(c,a,b)     ((c)+(a)*(b))
+#define MAC16_16_Q13(c,a,b)     ((c)+(a)*(b))
+#define MAC16_16_P13(c,a,b)     ((c)+(a)*(b))
+#define MULT16_16_Q11_32(a,b)     ((a)*(b))
+#define MULT16_16_Q13(a,b)     ((a)*(b))
+#define MULT16_16_Q14(a,b)     ((a)*(b))
+#define MULT16_16_Q15(a,b)     ((a)*(b))
+#define MULT16_16_P15(a,b)     ((a)*(b))
+#define MULT16_16_P13(a,b)     ((a)*(b))
+#define MULT16_16_P14(a,b)     ((a)*(b))
+
+#define DIV32_16(a,b)     (((spx_word32_t)(a))/(spx_word16_t)(b))
+#define PDIV32_16(a,b)     (((spx_word32_t)(a))/(spx_word16_t)(b))
+#define DIV32(a,b)     (((spx_word32_t)(a))/(spx_word32_t)(b))
+#define PDIV32(a,b)     (((spx_word32_t)(a))/(spx_word32_t)(b))
+
+
+#endif
+
+
+#if defined (CONFIG_TI_C54X) || defined (CONFIG_TI_C55X)
+
+/* 2 on TI C5x DSP */
+#define BYTES_PER_CHAR 2 
+#define BITS_PER_CHAR 16
+#define LOG2_BITS_PER_CHAR 4
+
+#else 
+
+#define BYTES_PER_CHAR 1
+#define BITS_PER_CHAR 8
+#define LOG2_BITS_PER_CHAR 3
+
+#endif
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/bits.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/bits.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,363 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: speex_bits.c
+
+   Handles bit packing/unpacking
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <speex/speex_bits.h>
+#include "misc.h"
+
+/* Maximum size of the bit-stream (for fixed-size allocation) */
+#ifndef MAX_CHARS_PER_FRAME
+#define MAX_CHARS_PER_FRAME (2000/BYTES_PER_CHAR)
+#endif
+
+void speex_bits_init(SpeexBits *bits)
+{
+   bits->chars = (char*)speex_alloc(MAX_CHARS_PER_FRAME);
+   if (!bits->chars)
+      return;
+
+   bits->buf_size = MAX_CHARS_PER_FRAME;
+
+   bits->owner=1;
+
+   speex_bits_reset(bits);
+}
+
+void speex_bits_init_buffer(SpeexBits *bits, void *buff, int buf_size)
+{
+   bits->chars = (char*)buff;
+   bits->buf_size = buf_size;
+
+   bits->owner=0;
+
+   speex_bits_reset(bits);
+}
+
+void speex_bits_destroy(SpeexBits *bits)
+{
+   if (bits->owner)
+      speex_free(bits->chars);
+   /* Will do something once the allocation is dynamic */
+}
+
+void speex_bits_reset(SpeexBits *bits)
+{
+   bits->chars[0]=0;
+   bits->nbBits=0;
+   bits->charPtr=0;
+   bits->bitPtr=0;
+   bits->overflow=0;
+}
+
+void speex_bits_rewind(SpeexBits *bits)
+{
+   bits->charPtr=0;
+   bits->bitPtr=0;
+   bits->overflow=0;
+}
+
+void speex_bits_read_from(SpeexBits *bits, char *chars, int len)
+{
+   int i;
+   int nchars = len / BYTES_PER_CHAR;
+   if (nchars > bits->buf_size)
+   {
+      speex_warning_int("Packet is larger than allocated buffer: ", len);
+      if (bits->owner)
+      {
+         char *tmp = (char*)speex_realloc(bits->chars, nchars);
+         if (tmp)
+         {
+            bits->buf_size=nchars;
+            bits->chars=tmp;
+         } else {
+            nchars=bits->buf_size;
+            speex_warning("Could not resize input buffer: truncating input");
+         }
+      } else {
+         speex_warning("Do not own input buffer: truncating input");
+         nchars=bits->buf_size;
+      }
+   }
+#if (BYTES_PER_CHAR==2)
+/* Swap bytes to proper endian order (could be done externally) */
+#define HTOLS(A) ((((A) >> 8)&0xff)|(((A) & 0xff)<<8))
+#else
+#define HTOLS(A) (A)
+#endif
+   for (i=0;i<nchars;i++)
+      bits->chars[i]=HTOLS(chars[i]);
+
+   bits->nbBits=nchars<<LOG2_BITS_PER_CHAR;
+   bits->charPtr=0;
+   bits->bitPtr=0;
+   bits->overflow=0;
+}
+
+static void speex_bits_flush(SpeexBits *bits)
+{
+   int i;
+   int nchars = ((bits->nbBits+BITS_PER_CHAR-1)>>LOG2_BITS_PER_CHAR);
+   if (bits->charPtr>0)
+   {
+     for (i=bits->charPtr;i<nchars; i++) 
+       bits->chars[i-bits->charPtr]=bits->chars[i];
+   }
+   bits->nbBits -= bits->charPtr<<LOG2_BITS_PER_CHAR;
+   bits->charPtr=0;
+}
+
+void speex_bits_read_whole_bytes(SpeexBits *bits, char *chars, int nbytes)
+{
+   int i,pos;
+   int nchars = nbytes/BYTES_PER_CHAR;
+
+   if (((bits->nbBits+BITS_PER_CHAR-1)>>LOG2_BITS_PER_CHAR)+nchars > bits->buf_size)
+   {
+      /* Packet is larger than allocated buffer */
+      if (bits->owner)
+      {
+         char *tmp = (char*)speex_realloc(bits->chars, (bits->nbBits>>LOG2_BITS_PER_CHAR)+nchars+1);
+         if (tmp)
+         {
+            bits->buf_size=(bits->nbBits>>LOG2_BITS_PER_CHAR)+nchars+1;
+            bits->chars=tmp;
+         } else {
+            nchars=bits->buf_size-(bits->nbBits>>LOG2_BITS_PER_CHAR)-1;
+            speex_warning("Could not resize input buffer: truncating input");
+         }
+      } else {
+         speex_warning("Do not own input buffer: truncating input");
+         nchars=bits->buf_size;
+      }
+   }
+
+   speex_bits_flush(bits);
+   pos=bits->nbBits>>LOG2_BITS_PER_CHAR;
+   for (i=0;i<nchars;i++)
+      bits->chars[pos+i]=HTOLS(chars[i]);
+   bits->nbBits+=nchars<<LOG2_BITS_PER_CHAR;
+}
+
+int speex_bits_write(SpeexBits *bits, char *chars, int max_nbytes)
+{
+   int i;
+   int max_nchars = max_nbytes/BYTES_PER_CHAR;
+   int charPtr, bitPtr, nbBits;
+
+   /* Insert terminator, but save the data so we can put it back after */
+   bitPtr=bits->bitPtr;
+   charPtr=bits->charPtr;
+   nbBits=bits->nbBits;
+   speex_bits_insert_terminator(bits);
+   bits->bitPtr=bitPtr;
+   bits->charPtr=charPtr;
+   bits->nbBits=nbBits;
+
+   if (max_nchars > ((bits->nbBits+BITS_PER_CHAR-1)>>LOG2_BITS_PER_CHAR))
+      max_nchars = ((bits->nbBits+BITS_PER_CHAR-1)>>LOG2_BITS_PER_CHAR);
+
+   for (i=0;i<max_nchars;i++)
+      chars[i]=HTOLS(bits->chars[i]);
+   return max_nchars*BYTES_PER_CHAR;
+}
+
+int speex_bits_write_whole_bytes(SpeexBits *bits, char *chars, int max_nbytes)
+{
+   int max_nchars = max_nbytes/BYTES_PER_CHAR;
+   int i;
+   if (max_nchars > ((bits->nbBits)>>LOG2_BITS_PER_CHAR))
+      max_nchars = ((bits->nbBits)>>LOG2_BITS_PER_CHAR);
+   for (i=0;i<max_nchars;i++)
+      chars[i]=HTOLS(bits->chars[i]);
+
+   if (bits->bitPtr>0)
+      bits->chars[0]=bits->chars[max_nchars];
+   else
+      bits->chars[0]=0;
+   for (i=1;i<((bits->nbBits)>>LOG2_BITS_PER_CHAR)+1;i++)
+      bits->chars[i]=0;
+   bits->charPtr=0;
+   bits->nbBits &= (BITS_PER_CHAR-1);
+   return max_nchars*BYTES_PER_CHAR;
+}
+
+void speex_bits_pack(SpeexBits *bits, int data, int nbBits)
+{
+   unsigned int d=data;
+
+   if (bits->charPtr+((nbBits+bits->bitPtr)>>LOG2_BITS_PER_CHAR) >= bits->buf_size)
+   {
+      speex_warning("Buffer too small to pack bits");
+      if (bits->owner)
+      {
+	int new_nchars = ((bits->buf_size+5)*3)>>1;
+         char *tmp = (char*)speex_realloc(bits->chars, new_nchars);
+         if (tmp)
+         {
+	    speex_memset_bytes(tmp, 0, new_nchars);
+            bits->buf_size=new_nchars;
+            bits->chars=tmp;
+         } else {
+            speex_warning("Could not resize input buffer: not packing");
+            return;
+         }
+      } else {
+         speex_warning("Do not own input buffer: not packing");
+         return;
+      }
+   }
+
+   while(nbBits)
+   {
+      int bit;
+      bit = (d>>(nbBits-1))&1;
+      bits->chars[bits->charPtr] |= bit<<(BITS_PER_CHAR-1-bits->bitPtr);
+      bits->bitPtr++;
+
+      if (bits->bitPtr==BITS_PER_CHAR)
+      {
+         bits->bitPtr=0;
+         bits->charPtr++;
+         bits->chars[bits->charPtr] = 0;
+      }
+      bits->nbBits++;
+      nbBits--;
+   }
+}
+
+int speex_bits_unpack_signed(SpeexBits *bits, int nbBits)
+{
+   unsigned int d=speex_bits_unpack_unsigned(bits,nbBits);
+   /* If number is negative */
+   if (d>>(nbBits-1))
+   {
+      d |= (-1)<<nbBits;
+   }
+   return d;
+}
+
+unsigned int speex_bits_unpack_unsigned(SpeexBits *bits, int nbBits)
+{
+   unsigned int d=0;
+   if ((bits->charPtr<<LOG2_BITS_PER_CHAR)+bits->bitPtr+nbBits>bits->nbBits)
+      bits->overflow=1;
+   if (bits->overflow)
+      return 0;
+   while(nbBits)
+   {
+      d<<=1;
+      d |= (bits->chars[bits->charPtr]>>(BITS_PER_CHAR-1 - bits->bitPtr))&1;
+      bits->bitPtr++;
+      if (bits->bitPtr==BITS_PER_CHAR)
+      {
+         bits->bitPtr=0;
+         bits->charPtr++;
+      }
+      nbBits--;
+   }
+   return d;
+}
+
+unsigned int speex_bits_peek_unsigned(SpeexBits *bits, int nbBits)
+{
+   unsigned int d=0;
+   int bitPtr, charPtr;
+   char *chars;
+
+   if ((bits->charPtr<<LOG2_BITS_PER_CHAR)+bits->bitPtr+nbBits>bits->nbBits)
+     bits->overflow=1;
+   if (bits->overflow)
+      return 0;
+
+   bitPtr=bits->bitPtr;
+   charPtr=bits->charPtr;
+   chars = bits->chars;
+   while(nbBits)
+   {
+      d<<=1;
+      d |= (chars[charPtr]>>(BITS_PER_CHAR-1 - bitPtr))&1;
+      bitPtr++;
+      if (bitPtr==BITS_PER_CHAR)
+      {
+         bitPtr=0;
+         charPtr++;
+      }
+      nbBits--;
+   }
+   return d;
+}
+
+int speex_bits_peek(SpeexBits *bits)
+{
+   if ((bits->charPtr<<LOG2_BITS_PER_CHAR)+bits->bitPtr+1>bits->nbBits)
+      bits->overflow=1;
+   if (bits->overflow)
+      return 0;
+   return (bits->chars[bits->charPtr]>>(BITS_PER_CHAR-1 - bits->bitPtr))&1;
+}
+
+void speex_bits_advance(SpeexBits *bits, int n)
+{
+    if (((bits->charPtr<<LOG2_BITS_PER_CHAR)+bits->bitPtr+n>bits->nbBits) || bits->overflow){
+      bits->overflow=1;
+      return;
+    }
+   bits->charPtr += (bits->bitPtr+n) >> LOG2_BITS_PER_CHAR; /* divide by BITS_PER_CHAR */
+   bits->bitPtr = (bits->bitPtr+n) & (BITS_PER_CHAR-1);       /* modulo by BITS_PER_CHAR */
+}
+
+int speex_bits_remaining(SpeexBits *bits)
+{
+   if (bits->overflow)
+      return -1;
+   else
+      return bits->nbBits-((bits->charPtr<<LOG2_BITS_PER_CHAR)+bits->bitPtr);
+}
+
+int speex_bits_nbytes(SpeexBits *bits)
+{
+   return ((bits->nbBits+BITS_PER_CHAR-1)>>LOG2_BITS_PER_CHAR);
+}
+
+void speex_bits_insert_terminator(SpeexBits *bits)
+{
+   if (bits->bitPtr)
+      speex_bits_pack(bits, 0, 1);
+   while (bits->bitPtr)
+      speex_bits_pack(bits, 1, 1);
+}

Added: freeswitch/trunk/libs/speex/libspeex/cb_search.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/cb_search.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,606 @@
+/* Copyright (C) 2002-2006 Jean-Marc Valin 
+   File: cb_search.c
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "cb_search.h"
+#include "filters.h"
+#include "stack_alloc.h"
+#include "vq.h"
+#include "misc.h"
+
+#ifdef _USE_SSE
+#include "cb_search_sse.h"
+#elif defined(ARM4_ASM) || defined(ARM5E_ASM)
+#include "cb_search_arm4.h"
+#elif defined(BFIN_ASM)
+#include "cb_search_bfin.h"
+#endif
+
+#ifndef OVERRIDE_COMPUTE_WEIGHTED_CODEBOOK
+static void compute_weighted_codebook(const signed char *shape_cb, const spx_word16_t *r, spx_word16_t *resp, spx_word16_t *resp2, spx_word32_t *E, int shape_cb_size, int subvect_size, char *stack)
+{
+   int i, j, k;
+   VARDECL(spx_word16_t *shape);
+   ALLOC(shape, subvect_size, spx_word16_t);
+   for (i=0;i<shape_cb_size;i++)
+   {
+      spx_word16_t *res;
+      
+      res = resp+i*subvect_size;
+      for (k=0;k<subvect_size;k++)
+         shape[k] = (spx_word16_t)shape_cb[i*subvect_size+k];
+      E[i]=0;
+
+      /* Compute codeword response using convolution with impulse response */
+      for(j=0;j<subvect_size;j++)
+      {
+         spx_word32_t resj=0;
+         spx_word16_t res16;
+         for (k=0;k<=j;k++)
+            resj = MAC16_16(resj,shape[k],r[j-k]);
+#ifdef FIXED_POINT
+         res16 = EXTRACT16(SHR32(resj, 13));
+#else
+         res16 = 0.03125f*resj;
+#endif
+         /* Compute codeword energy */
+         E[i]=MAC16_16(E[i],res16,res16);
+         res[j] = res16;
+         /*printf ("%d\n", (int)res[j]);*/
+      }
+   }
+
+}
+#endif
+
+#ifndef OVERRIDE_TARGET_UPDATE
+static inline void target_update(spx_word16_t *t, spx_word16_t g, spx_word16_t *r, int len)
+{
+   int n;
+   for (n=0;n<len;n++)
+      t[n] = SUB16(t[n],PSHR32(MULT16_16(g,r[n]),13));
+}
+#endif
+
+
+
+static void split_cb_search_shape_sign_N1(
+spx_word16_t target[],			/* target vector */
+spx_coef_t ak[],			/* LPCs for this subframe */
+spx_coef_t awk1[],			/* Weighted LPCs for this subframe */
+spx_coef_t awk2[],			/* Weighted LPCs for this subframe */
+const void *par,                      /* Codebook/search parameters*/
+int   p,                        /* number of LPC coeffs */
+int   nsf,                      /* number of samples in subframe */
+spx_sig_t *exc,
+spx_word16_t *r,
+SpeexBits *bits,
+char *stack,
+int   update_target
+)
+{
+   int i,j,m,q;
+   VARDECL(spx_word16_t *resp);
+#ifdef _USE_SSE
+   VARDECL(__m128 *resp2);
+   VARDECL(__m128 *E);
+#else
+   spx_word16_t *resp2;
+   VARDECL(spx_word32_t *E);
+#endif
+   VARDECL(spx_word16_t *t);
+   VARDECL(spx_sig_t *e);
+   const signed char *shape_cb;
+   int shape_cb_size, subvect_size, nb_subvect;
+   const split_cb_params *params;
+   int best_index;
+   spx_word32_t best_dist;
+   int have_sign;
+   
+   params = (const split_cb_params *) par;
+   subvect_size = params->subvect_size;
+   nb_subvect = params->nb_subvect;
+   shape_cb_size = 1<<params->shape_bits;
+   shape_cb = params->shape_cb;
+   have_sign = params->have_sign;
+   ALLOC(resp, shape_cb_size*subvect_size, spx_word16_t);
+#ifdef _USE_SSE
+   ALLOC(resp2, (shape_cb_size*subvect_size)>>2, __m128);
+   ALLOC(E, shape_cb_size>>2, __m128);
+#else
+   resp2 = resp;
+   ALLOC(E, shape_cb_size, spx_word32_t);
+#endif
+   ALLOC(t, nsf, spx_word16_t);
+   ALLOC(e, nsf, spx_sig_t);
+   
+   /* FIXME: Do we still need to copy the target? */
+   for (i=0;i<nsf;i++)
+      t[i]=target[i];
+
+   compute_weighted_codebook(shape_cb, r, resp, resp2, E, shape_cb_size, subvect_size, stack);
+
+   for (i=0;i<nb_subvect;i++)
+   {
+      spx_word16_t *x=t+subvect_size*i;
+      /*Find new n-best based on previous n-best j*/
+      if (have_sign)
+         vq_nbest_sign(x, resp2, subvect_size, shape_cb_size, E, 1, &best_index, &best_dist, stack);
+      else
+         vq_nbest(x, resp2, subvect_size, shape_cb_size, E, 1, &best_index, &best_dist, stack);
+      
+      speex_bits_pack(bits,best_index,params->shape_bits+have_sign);
+      
+      {
+         int rind;
+         spx_word16_t *res;
+         spx_word16_t sign=1;
+         rind = best_index;
+         if (rind>=shape_cb_size)
+         {
+            sign=-1;
+            rind-=shape_cb_size;
+         }
+         res = resp+rind*subvect_size;
+         if (sign>0)
+            for (m=0;m<subvect_size;m++)
+               t[subvect_size*i+m] = SUB16(t[subvect_size*i+m], res[m]);
+         else
+            for (m=0;m<subvect_size;m++)
+               t[subvect_size*i+m] = ADD16(t[subvect_size*i+m], res[m]);
+
+#ifdef FIXED_POINT
+         if (sign)
+         {
+            for (j=0;j<subvect_size;j++)
+               e[subvect_size*i+j]=SHL32(EXTEND32(shape_cb[rind*subvect_size+j]),SIG_SHIFT-5);
+         } else {
+            for (j=0;j<subvect_size;j++)
+               e[subvect_size*i+j]=NEG32(SHL32(EXTEND32(shape_cb[rind*subvect_size+j]),SIG_SHIFT-5));
+         }
+#else
+         for (j=0;j<subvect_size;j++)
+            e[subvect_size*i+j]=sign*0.03125*shape_cb[rind*subvect_size+j];
+#endif
+      
+      }
+            
+      for (m=0;m<subvect_size;m++)
+      {
+         spx_word16_t g;
+         int rind;
+         spx_word16_t sign=1;
+         rind = best_index;
+         if (rind>=shape_cb_size)
+         {
+            sign=-1;
+            rind-=shape_cb_size;
+         }
+         
+         q=subvect_size-m;
+#ifdef FIXED_POINT
+         g=sign*shape_cb[rind*subvect_size+m];
+#else
+         g=sign*0.03125*shape_cb[rind*subvect_size+m];
+#endif
+         target_update(t+subvect_size*(i+1), g, r+q, nsf-subvect_size*(i+1));
+      }
+   }
+
+   /* Update excitation */
+   /* FIXME: We could update the excitation directly above */
+   for (j=0;j<nsf;j++)
+      exc[j]=ADD32(exc[j],e[j]);
+   
+   /* Update target: only update target if necessary */
+   if (update_target)
+   {
+      VARDECL(spx_sig_t *r2);
+      ALLOC(r2, nsf, spx_sig_t);
+      syn_percep_zero(e, ak, awk1, awk2, r2, nsf,p, stack);
+      for (j=0;j<nsf;j++)
+         target[j]=SUB16(target[j],EXTRACT16(PSHR32(r2[j],8)));
+   }
+}
+
+
+
+void split_cb_search_shape_sign(
+spx_word16_t target[],			/* target vector */
+spx_coef_t ak[],			/* LPCs for this subframe */
+spx_coef_t awk1[],			/* Weighted LPCs for this subframe */
+spx_coef_t awk2[],			/* Weighted LPCs for this subframe */
+const void *par,                      /* Codebook/search parameters*/
+int   p,                        /* number of LPC coeffs */
+int   nsf,                      /* number of samples in subframe */
+spx_sig_t *exc,
+spx_word16_t *r,
+SpeexBits *bits,
+char *stack,
+int   complexity,
+int   update_target
+)
+{
+   int i,j,k,m,n,q;
+   VARDECL(spx_word16_t *resp);
+#ifdef _USE_SSE
+   VARDECL(__m128 *resp2);
+   VARDECL(__m128 *E);
+#else
+   spx_word16_t *resp2;
+   VARDECL(spx_word32_t *E);
+#endif
+   VARDECL(spx_word16_t *t);
+   VARDECL(spx_sig_t *e);
+   VARDECL(spx_sig_t *r2);
+   VARDECL(spx_word16_t *tmp);
+   VARDECL(spx_word32_t *ndist);
+   VARDECL(spx_word32_t *odist);
+   VARDECL(int *itmp);
+   VARDECL(spx_word16_t **ot2);
+   VARDECL(spx_word16_t **nt2);
+   spx_word16_t **ot, **nt;
+   VARDECL(int **nind);
+   VARDECL(int **oind);
+   VARDECL(int *ind);
+   const signed char *shape_cb;
+   int shape_cb_size, subvect_size, nb_subvect;
+   const split_cb_params *params;
+   int N=2;
+   VARDECL(int *best_index);
+   VARDECL(spx_word32_t *best_dist);
+   VARDECL(int *best_nind);
+   VARDECL(int *best_ntarget);
+   int have_sign;
+   N=complexity;
+   if (N>10)
+      N=10;
+   /* Complexity isn't as important for the codebooks as it is for the pitch */
+   N=(2*N)/3;
+   if (N<1)
+      N=1;
+   if (N==1)
+   {
+      split_cb_search_shape_sign_N1(target,ak,awk1,awk2,par,p,nsf,exc,r,bits,stack,update_target);
+      return;
+   }
+   ALLOC(ot2, N, spx_word16_t*);
+   ALLOC(nt2, N, spx_word16_t*);
+   ALLOC(oind, N, int*);
+   ALLOC(nind, N, int*);
+
+   params = (const split_cb_params *) par;
+   subvect_size = params->subvect_size;
+   nb_subvect = params->nb_subvect;
+   shape_cb_size = 1<<params->shape_bits;
+   shape_cb = params->shape_cb;
+   have_sign = params->have_sign;
+   ALLOC(resp, shape_cb_size*subvect_size, spx_word16_t);
+#ifdef _USE_SSE
+   ALLOC(resp2, (shape_cb_size*subvect_size)>>2, __m128);
+   ALLOC(E, shape_cb_size>>2, __m128);
+#else
+   resp2 = resp;
+   ALLOC(E, shape_cb_size, spx_word32_t);
+#endif
+   ALLOC(t, nsf, spx_word16_t);
+   ALLOC(e, nsf, spx_sig_t);
+   ALLOC(r2, nsf, spx_sig_t);
+   ALLOC(ind, nb_subvect, int);
+
+   ALLOC(tmp, 2*N*nsf, spx_word16_t);
+   for (i=0;i<N;i++)
+   {
+      ot2[i]=tmp+2*i*nsf;
+      nt2[i]=tmp+(2*i+1)*nsf;
+   }
+   ot=ot2;
+   nt=nt2;
+   ALLOC(best_index, N, int);
+   ALLOC(best_dist, N, spx_word32_t);
+   ALLOC(best_nind, N, int);
+   ALLOC(best_ntarget, N, int);
+   ALLOC(ndist, N, spx_word32_t);
+   ALLOC(odist, N, spx_word32_t);
+   
+   ALLOC(itmp, 2*N*nb_subvect, int);
+   for (i=0;i<N;i++)
+   {
+      nind[i]=itmp+2*i*nb_subvect;
+      oind[i]=itmp+(2*i+1)*nb_subvect;
+   }
+   
+   for (i=0;i<nsf;i++)
+      t[i]=target[i];
+
+   for (j=0;j<N;j++)
+      speex_move(&ot[j][0], t, nsf*sizeof(spx_word16_t));
+
+   /* Pre-compute codewords response and energy */
+   compute_weighted_codebook(shape_cb, r, resp, resp2, E, shape_cb_size, subvect_size, stack);
+
+   for (j=0;j<N;j++)
+      odist[j]=0;
+   
+   /*For all subvectors*/
+   for (i=0;i<nb_subvect;i++)
+   {
+      /*"erase" nbest list*/
+      for (j=0;j<N;j++)
+         ndist[j]=VERY_LARGE32;
+
+      /*For all n-bests of previous subvector*/
+      for (j=0;j<N;j++)
+      {
+         spx_word16_t *x=ot[j]+subvect_size*i;
+         spx_word32_t tener = 0;
+         for (m=0;m<subvect_size;m++)
+            tener = MAC16_16(tener, x[m],x[m]);
+#ifdef FIXED_POINT
+         tener = SHR32(tener,1);
+#else
+         tener *= .5;
+#endif
+         /*Find new n-best based on previous n-best j*/
+         if (have_sign)
+            vq_nbest_sign(x, resp2, subvect_size, shape_cb_size, E, N, best_index, best_dist, stack);
+         else
+            vq_nbest(x, resp2, subvect_size, shape_cb_size, E, N, best_index, best_dist, stack);
+
+         /*For all new n-bests*/
+         for (k=0;k<N;k++)
+         {
+            /* Compute total distance (including previous sub-vectors */
+            spx_word32_t err = ADD32(ADD32(odist[j],best_dist[k]),tener);
+            
+            /*update n-best list*/
+            if (err<ndist[N-1])
+            {
+               for (m=0;m<N;m++)
+               {
+                  if (err < ndist[m])
+                  {
+                     for (n=N-1;n>m;n--)
+                     {
+                        ndist[n] = ndist[n-1];
+                        best_nind[n] = best_nind[n-1];
+                        best_ntarget[n] = best_ntarget[n-1];
+                     }
+                     ndist[m] = err;
+                     best_nind[n] = best_index[k];
+                     best_ntarget[n] = j;
+                     break;
+                  }
+               }
+            }
+         }
+         if (i==0)
+            break;
+      }
+      for (j=0;j<N;j++)
+      {
+         /*previous target (we don't care what happened before*/
+         for (m=(i+1)*subvect_size;m<nsf;m++)
+            nt[j][m]=ot[best_ntarget[j]][m];
+         
+         /* New code: update the rest of the target only if it's worth it */
+         for (m=0;m<subvect_size;m++)
+         {
+            spx_word16_t g;
+            int rind;
+            spx_word16_t sign=1;
+            rind = best_nind[j];
+            if (rind>=shape_cb_size)
+            {
+               sign=-1;
+               rind-=shape_cb_size;
+            }
+
+            q=subvect_size-m;
+#ifdef FIXED_POINT
+            g=sign*shape_cb[rind*subvect_size+m];
+#else
+            g=sign*0.03125*shape_cb[rind*subvect_size+m];
+#endif
+            target_update(nt[j]+subvect_size*(i+1), g, r+q, nsf-subvect_size*(i+1));
+         }
+
+         for (q=0;q<nb_subvect;q++)
+            nind[j][q]=oind[best_ntarget[j]][q];
+         nind[j][i]=best_nind[j];
+      }
+
+      /*update old-new data*/
+      /* just swap pointers instead of a long copy */
+      {
+         spx_word16_t **tmp2;
+         tmp2=ot;
+         ot=nt;
+         nt=tmp2;
+      }
+      for (j=0;j<N;j++)
+         for (m=0;m<nb_subvect;m++)
+            oind[j][m]=nind[j][m];
+      for (j=0;j<N;j++)
+         odist[j]=ndist[j];
+   }
+
+   /*save indices*/
+   for (i=0;i<nb_subvect;i++)
+   {
+      ind[i]=nind[0][i];
+      speex_bits_pack(bits,ind[i],params->shape_bits+have_sign);
+   }
+   
+   /* Put everything back together */
+   for (i=0;i<nb_subvect;i++)
+   {
+      int rind;
+      spx_word16_t sign=1;
+      rind = ind[i];
+      if (rind>=shape_cb_size)
+      {
+         sign=-1;
+         rind-=shape_cb_size;
+      }
+#ifdef FIXED_POINT
+      if (sign==1)
+      {
+         for (j=0;j<subvect_size;j++)
+            e[subvect_size*i+j]=SHL32(EXTEND32(shape_cb[rind*subvect_size+j]),SIG_SHIFT-5);
+      } else {
+         for (j=0;j<subvect_size;j++)
+            e[subvect_size*i+j]=NEG32(SHL32(EXTEND32(shape_cb[rind*subvect_size+j]),SIG_SHIFT-5));
+      }
+#else
+      for (j=0;j<subvect_size;j++)
+         e[subvect_size*i+j]=sign*0.03125*shape_cb[rind*subvect_size+j];
+#endif
+   }   
+   /* Update excitation */
+   for (j=0;j<nsf;j++)
+      exc[j]=ADD32(exc[j],e[j]);
+   
+   /* Update target: only update target if necessary */
+   if (update_target)
+   {
+      syn_percep_zero(e, ak, awk1, awk2, r2, nsf,p, stack);
+      for (j=0;j<nsf;j++)
+         target[j]=SUB16(target[j],EXTRACT16(PSHR32(r2[j],8)));
+   }
+}
+
+
+void split_cb_shape_sign_unquant(
+spx_sig_t *exc,
+const void *par,                      /* non-overlapping codebook */
+int   nsf,                      /* number of samples in subframe */
+SpeexBits *bits,
+char *stack,
+spx_int32_t *seed
+)
+{
+   int i,j;
+   VARDECL(int *ind);
+   VARDECL(int *signs);
+   const signed char *shape_cb;
+   int shape_cb_size, subvect_size, nb_subvect;
+   const split_cb_params *params;
+   int have_sign;
+
+   params = (const split_cb_params *) par;
+   subvect_size = params->subvect_size;
+   nb_subvect = params->nb_subvect;
+   shape_cb_size = 1<<params->shape_bits;
+   shape_cb = params->shape_cb;
+   have_sign = params->have_sign;
+
+   ALLOC(ind, nb_subvect, int);
+   ALLOC(signs, nb_subvect, int);
+
+   /* Decode codewords and gains */
+   for (i=0;i<nb_subvect;i++)
+   {
+      if (have_sign)
+         signs[i] = speex_bits_unpack_unsigned(bits, 1);
+      else
+         signs[i] = 0;
+      ind[i] = speex_bits_unpack_unsigned(bits, params->shape_bits);
+   }
+   /* Compute decoded excitation */
+   for (i=0;i<nb_subvect;i++)
+   {
+      spx_word16_t s=1;
+      if (signs[i])
+         s=-1;
+#ifdef FIXED_POINT
+      if (s==1)
+      {
+         for (j=0;j<subvect_size;j++)
+            exc[subvect_size*i+j]=SHL32(EXTEND32(shape_cb[ind[i]*subvect_size+j]),SIG_SHIFT-5);
+      } else {
+         for (j=0;j<subvect_size;j++)
+            exc[subvect_size*i+j]=NEG32(SHL32(EXTEND32(shape_cb[ind[i]*subvect_size+j]),SIG_SHIFT-5));
+      }
+#else
+      for (j=0;j<subvect_size;j++)
+         exc[subvect_size*i+j]+=s*0.03125*shape_cb[ind[i]*subvect_size+j];      
+#endif
+   }
+}
+
+void noise_codebook_quant(
+spx_word16_t target[],			/* target vector */
+spx_coef_t ak[],			/* LPCs for this subframe */
+spx_coef_t awk1[],			/* Weighted LPCs for this subframe */
+spx_coef_t awk2[],			/* Weighted LPCs for this subframe */
+const void *par,                      /* Codebook/search parameters*/
+int   p,                        /* number of LPC coeffs */
+int   nsf,                      /* number of samples in subframe */
+spx_sig_t *exc,
+spx_word16_t *r,
+SpeexBits *bits,
+char *stack,
+int   complexity,
+int   update_target
+)
+{
+   int i;
+   VARDECL(spx_sig_t *tmp);
+   ALLOC(tmp, nsf, spx_sig_t);
+   for (i=0;i<nsf;i++)
+      tmp[i]=PSHR32(EXTEND32(target[i]),SIG_SHIFT);
+   residue_percep_zero(tmp, ak, awk1, awk2, tmp, nsf, p, stack);
+
+   for (i=0;i<nsf;i++)
+      exc[i]+=tmp[i];
+   for (i=0;i<nsf;i++)
+      target[i]=0;
+}
+
+
+void noise_codebook_unquant(
+spx_sig_t *exc,
+const void *par,                      /* non-overlapping codebook */
+int   nsf,                      /* number of samples in subframe */
+SpeexBits *bits,
+char *stack,
+spx_int32_t *seed
+)
+{
+   int i;
+   /* FIXME: This is bad, but I don't think the function ever gets called anyway */
+   for (i=0;i<nsf;i++)
+      exc[i]=SHL32(EXTEND32(speex_rand(1, seed)),SIG_SHIFT);
+}

Added: freeswitch/trunk/libs/speex/libspeex/cb_search.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/cb_search.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,103 @@
+/* Copyright (C) 2002 Jean-Marc Valin & David Rowe */
+/**
+   @file cb_search.h
+   @brief Overlapped codebook search
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef CB_SEARCH_H
+#define CB_SEARCH_H
+
+#include <speex/speex_bits.h>
+#include "misc.h"
+
+/** Split codebook parameters. */
+typedef struct split_cb_params {
+   int     subvect_size;
+   int     nb_subvect;
+   const signed char  *shape_cb;
+   int     shape_bits;
+   int     have_sign;
+} split_cb_params;
+
+
+void split_cb_search_shape_sign(
+spx_word16_t target[],             /* target vector */
+spx_coef_t ak[],                /* LPCs for this subframe */
+spx_coef_t awk1[],              /* Weighted LPCs for this subframe */
+spx_coef_t awk2[],              /* Weighted LPCs for this subframe */
+const void *par,                /* Codebook/search parameters */
+int   p,                        /* number of LPC coeffs */
+int   nsf,                      /* number of samples in subframe */
+spx_sig_t *exc,
+spx_word16_t *r,
+SpeexBits *bits,
+char *stack,
+int   complexity,
+int   update_target
+);
+
+void split_cb_shape_sign_unquant(
+spx_sig_t *exc,
+const void *par,                /* non-overlapping codebook */
+int   nsf,                      /* number of samples in subframe */
+SpeexBits *bits,
+char *stack,
+spx_int32_t *seed
+);
+
+
+void noise_codebook_quant(
+spx_word16_t target[],             /* target vector */
+spx_coef_t ak[],                /* LPCs for this subframe */
+spx_coef_t awk1[],              /* Weighted LPCs for this subframe */
+spx_coef_t awk2[],              /* Weighted LPCs for this subframe */
+const void *par,                /* Codebook/search parameters */
+int   p,                        /* number of LPC coeffs */
+int   nsf,                      /* number of samples in subframe */
+spx_sig_t *exc,
+spx_word16_t *r,
+SpeexBits *bits,
+char *stack,
+int   complexity,
+int   update_target
+);
+
+
+void noise_codebook_unquant(
+spx_sig_t *exc,
+const void *par,                /* non-overlapping codebook */
+int   nsf,                      /* number of samples in subframe */
+SpeexBits *bits,
+char *stack,
+spx_int32_t *seed
+);
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/cb_search_arm4.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/cb_search_arm4.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,137 @@
+/* Copyright (C) 2004 Jean-Marc Valin */
+/**
+   @file cb_search_arm4.h
+   @brief Fixed codebook functions (ARM4 version)
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/* This optimization is temporaly disabled until it is fixed to account for the fact 
+   that "r" is now a 16-bit array */
+#if 0
+#define OVERRIDE_COMPUTE_WEIGHTED_CODEBOOK
+static void compute_weighted_codebook(const signed char *shape_cb, const spx_word16_t *r, spx_word16_t *resp, spx_word16_t *resp2, spx_word32_t *E, int shape_cb_size, int subvect_size, char *stack)
+{
+   int i, j, k;
+  //const signed char *shape;
+   for (i=0;i<shape_cb_size;i+=4)
+   {
+
+      //shape = shape_cb;
+      E[0]=0;
+      E[1]=0;
+      E[2]=0;
+      E[3]=0;
+
+      /* Compute codeword response using convolution with impulse response */
+      for(j=0;j<subvect_size;j++)
+      {
+#if 1
+          spx_word16_t *res;
+          res = resp+j;
+          spx_word32_t resj0,resj1,resj2,resj3;
+          spx_word32_t dead1, dead2, dead3, dead4, dead5, dead6, dead7, dead8;
+          __asm__ __volatile__ (
+                "mov %0, #0 \n\t"
+                "mov %1, #0 \n\t"
+                "mov %2, #0 \n\t"
+                "mov %3, #0 \n\t"
+                ".weighted%=: \n\t"
+                "ldrsb %8, [%6] \n\t"
+                "ldr %10, [%5], #-4 \n\t"
+                "mov %9, %6 \n\t"
+                "ldrsb %11, [%9, %7]! \n\t"
+                "mla %0, %10, %8, %0 \n\t"
+                "ldrsb %8, [%9, %7]! \n\t"
+                "mla %1, %10, %11, %1 \n\t"
+                "ldrsb %11, [%9, %7]! \n\t"
+                "mla %2, %10, %8, %2 \n\t"
+                "subs %4, %4, #1 \n\t"
+                "mla %3, %10, %11, %3 \n\t"
+                "add %6, %6, #1 \n\t"
+                "bne .weighted%= \n\t"
+            : "=r" (resj0), "=r" (resj1), "=r" (resj2), "=r" (resj3),
+          "=r" (dead1), "=r" (dead2), "=r" (dead3), "=r" (dead4),
+          "=r" (dead5), "=r" (dead6), "=r" (dead7), "=r" (dead8)
+            : "4" (j+1), "5" (r+j), "6" (shape_cb), "7" (subvect_size)
+            : "cc", "memory");
+#else
+          spx_word16_t *res;
+          res = resp+j;
+          spx_word32_t resj0=0;
+          spx_word32_t resj1=0;
+          spx_word32_t resj2=0;
+          spx_word32_t resj3=0;
+          for (k=0;k<=j;k++)
+          {
+             const signed char *shape=shape_cb+k;
+             resj0 = MAC16_16(resj0,*shape,r[j-k]);
+             shape += subvect_size;
+             resj1 = MAC16_16(resj1,*shape,r[j-k]);
+             shape += subvect_size;
+             resj2 = MAC16_16(resj2,*shape,r[j-k]);
+             shape += subvect_size;
+             resj3 = MAC16_16(resj3,*shape,r[j-k]);
+             shape += subvect_size;
+          }
+#endif
+
+#ifdef FIXED_POINT
+          resj0 = SHR(resj0, 11);
+          resj1 = SHR(resj1, 11);
+          resj2 = SHR(resj2, 11);
+          resj3 = SHR(resj3, 11);
+#else
+          resj0 *= 0.03125;
+          resj1 *= 0.03125;
+          resj2 *= 0.03125;
+          resj3 *= 0.03125;
+#endif
+
+          /* Compute codeword energy */
+          E[0]=ADD32(E[0],MULT16_16(resj0,resj0));
+          E[1]=ADD32(E[1],MULT16_16(resj1,resj1));
+          E[2]=ADD32(E[2],MULT16_16(resj2,resj2));
+          E[3]=ADD32(E[3],MULT16_16(resj3,resj3));
+          *res = resj0;
+          res += subvect_size;
+          *res = resj1;
+          res += subvect_size;
+          *res = resj2;
+          res += subvect_size;
+          *res = resj3;
+          res += subvect_size;
+      }
+      resp += subvect_size<<2;
+      shape_cb += subvect_size<<2;
+      E+=4;
+   }
+
+}
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/cb_search_bfin.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/cb_search_bfin.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,109 @@
+/* Copyright (C) 2005 Analog Devices */
+/**
+   @author Jean-Marc Valin 
+   @file cb_search_bfin.h
+   @brief Fixed codebook functions (Blackfin version)
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#define OVERRIDE_COMPUTE_WEIGHTED_CODEBOOK 
+void compute_weighted_codebook(const signed char *shape_cb, const spx_word16_t *r, spx_word16_t *resp, spx_word16_t *resp2, spx_word32_t *E, int shape_cb_size, int subvect_size, char *stack)
+{
+   int i;
+   for (i=0;i<shape_cb_size;i++)
+   {
+      __asm__ __volatile__ (
+         "P0 = %0;\n\t"
+         "LC0 = P0;\n\t"
+         "P1 = %1;\n\t"
+         "P2 = %2;\n\t"
+         "P3 = %3;\n\t"
+         "P0 = 1;\n\t"
+         "L0 = 0;\n\t"
+         "L1 = 0;\n\t"
+         "R2 = 0;\n\t"
+         "A1 = 0;\n\t"
+         "LOOP outter%= LC0;\n\t"
+         "LOOP_BEGIN outter%=;\n\t"
+            "A0 = 0;\n\t"
+            "P4 = P1;\n\t"
+            "I1 = P2;\n\t"
+            "R0 = B[P4++] (X) || R1.L = W[I1--];\n\t"
+            "LOOP inner%= LC1 = P0;\n\t"
+            "LOOP_BEGIN inner%=;\n\t"
+               "A0 += R0.L*R1.L (IS) || R0 = B[P4++] (X) || R1.L = W[I1--];\n\t"
+            "LOOP_END inner%=;\n\t"
+            "R0 = A0;\n\t"
+            "R0 >>>= 13;\n\t"
+            "A1 += R0.L*R0.L (IS);\n\t"
+            "W[P3++] = R0;\n\t"
+            "P0 += 1;\n\t"
+            "P2 += 2;\n\t"
+         "LOOP_END outter%=;\n\t"
+         "P4 = %4;\n\t"
+         "R1 = A1;\n\t"
+         "[P4] = R1;\n\t"
+         :
+      : "m" (subvect_size), "m" (shape_cb), "m" (r), "m" (resp), "m" (E)
+      : "A0", "P0", "P1", "P2", "P3", "P4", "R0", "R1", "R2", "I0", "I1", "L0", 
+        "L1", "A0", "A1", "memory", "LC0", "LC1"
+      );
+      shape_cb += subvect_size;
+      resp += subvect_size;
+      E++;
+   }
+}
+
+#define OVERRIDE_TARGET_UPDATE
+static inline void target_update(spx_word16_t *t, spx_word16_t g, spx_word16_t *r, int len)
+{
+   if (!len)
+      return;
+   __asm__ __volatile__
+         (
+         "I0 = %0;\n\t"
+         "I1 = %1;\n\t"
+         "L0 = 0;\n\t"
+         "L1 = 0;\n\t"
+         "R2 = 4096;\n\t"
+         "LOOP tupdate%= LC0 = %3;\n\t"
+         "LOOP_BEGIN tupdate%=;\n\t"
+            "R0.L = W[I0] || R1.L = W[I1++];\n\t"
+            "R1 = (A1 = R1.L*%2.L) (IS);\n\t"
+            "R1 = R1 + R2;\n\t"
+            "R1 >>>= 13;\n\t"
+            "R0.L = R0.L - R1.L;\n\t"
+            "W[I0++] = R0.L;\n\t"
+         "LOOP_END tupdate%=;\n\t"
+   :
+   : "a" (t), "a" (r), "d" (g), "a" (len)
+   : "R0", "R1", "R2", "A1", "I0", "I1", "L0", "L1"
+         );
+}

Added: freeswitch/trunk/libs/speex/libspeex/cb_search_sse.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/cb_search_sse.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,84 @@
+/* Copyright (C) 2004 Jean-Marc Valin */
+/**
+   @file cb_search_sse.h
+   @brief Fixed codebook functions (SSE version)
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#include <xmmintrin.h>
+
+static inline void _spx_mm_getr_ps (__m128 U, float *__Z, float *__Y, float *__X, float *__W)
+{
+  union {
+    float __a[4];
+    __m128 __v;
+  } __u;
+  
+  __u.__v = U;
+
+  *__Z = __u.__a[0];
+  *__Y = __u.__a[1];
+  *__X = __u.__a[2];
+  *__W = __u.__a[3];
+
+}
+
+#define OVERRIDE_COMPUTE_WEIGHTED_CODEBOOK
+static void compute_weighted_codebook(const signed char *shape_cb, const spx_sig_t *_r, float *resp, __m128 *resp2, __m128 *E, int shape_cb_size, int subvect_size, char *stack)
+{
+   int i, j, k;
+   __m128 resj, EE;
+   VARDECL(__m128 *r);
+   VARDECL(__m128 *shape);
+   ALLOC(r, subvect_size, __m128);
+   ALLOC(shape, subvect_size, __m128);
+   for(j=0;j<subvect_size;j++)
+      r[j] = _mm_load_ps1(_r+j);
+   for (i=0;i<shape_cb_size;i+=4)
+   {
+      float *_res = resp+i*subvect_size;
+      const signed char *_shape = shape_cb+i*subvect_size;
+      EE = _mm_setzero_ps();
+      for(j=0;j<subvect_size;j++)
+      {
+         shape[j] = _mm_setr_ps(0.03125*_shape[j], 0.03125*_shape[subvect_size+j], 0.03125*_shape[2*subvect_size+j], 0.03125*_shape[3*subvect_size+j]);
+      }
+      for(j=0;j<subvect_size;j++)
+      {
+         resj = _mm_setzero_ps();
+         for (k=0;k<=j;k++)
+            resj = _mm_add_ps(resj, _mm_mul_ps(shape[k],r[j-k]));
+         _spx_mm_getr_ps(resj, _res+j, _res+subvect_size+j, _res+2*subvect_size+j, _res+3*subvect_size+j);
+         *resp2++ = resj;
+         EE = _mm_add_ps(EE, _mm_mul_ps(resj, resj));
+      }
+      E[i>>2] = EE;
+   }
+}

Added: freeswitch/trunk/libs/speex/libspeex/exc_10_16_table.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/exc_10_16_table.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,50 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: exc_10_16_table.c
+   Codebook for excitation in narrowband CELP mode (3200 bps)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+
+const signed char exc_10_16_table[160] = {
+22,39,14,44,11,35,-2,23,-4,6,
+46,-28,13,-27,-23,12,4,20,-5,9,
+37,-18,-23,23,0,9,-6,-20,4,-1,
+-17,-5,-4,17,0,1,9,-2,1,2,
+2,-12,8,-25,39,15,9,16,-55,-11,
+9,11,5,10,-2,-60,8,13,-6,11,
+-16,27,-47,-12,11,1,16,-7,9,-3,
+-29,9,-14,25,-19,34,36,12,40,-10,
+-3,-24,-14,-37,-21,-35,-2,-36,3,-6,
+67,28,6,-17,-3,-12,-16,-15,-17,-7,
+-59,-36,-13,1,7,1,2,10,2,11,
+13,10,8,-2,7,3,5,4,2,2,
+-3,-8,4,-5,6,7,-42,15,35,-2,
+-46,38,28,-20,-9,1,7,-3,0,-2,
+0,0,0,0,0,0,0,0,0,0,
+-15,-28,52,32,5,-5,-17,-20,-10,-1};

Added: freeswitch/trunk/libs/speex/libspeex/exc_10_32_table.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/exc_10_32_table.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,66 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: exc_10_32_table.c
+   Codebook for excitation in narrowband CELP mode (4000 bps)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+
+const signed char exc_10_32_table[320] = {
+7,17,17,27,25,22,12,4,-3,0,
+28,-36,39,-24,-15,3,-9,15,-5,10,
+31,-28,11,31,-21,9,-11,-11,-2,-7,
+-25,14,-22,31,4,-14,19,-12,14,-5,
+4,-7,4,-5,9,0,-2,42,-47,-16,
+1,8,0,9,23,-57,0,28,-11,6,
+-31,55,-45,3,-5,4,2,-2,4,-7,
+-3,6,-2,7,-3,12,5,8,54,-10,
+8,-7,-8,-24,-25,-27,-14,-5,8,5,
+44,23,5,-9,-11,-11,-13,-9,-12,-8,
+-29,-8,-22,6,-15,3,-12,-1,-5,-3,
+34,-1,29,-16,17,-4,12,2,1,4,
+-2,-4,2,-1,11,-3,-52,28,30,-9,
+-32,25,44,-20,-24,4,6,-1,0,0,
+0,0,0,0,0,0,0,0,0,0,
+-25,-10,22,29,13,-13,-22,-13,-4,0,
+-4,-16,10,15,-36,-24,28,25,-1,-3,
+66,-33,-11,-15,6,0,3,4,-2,5,
+24,-20,-47,29,19,-2,-4,-1,0,-1,
+-2,3,1,8,-11,5,5,-57,28,28,
+0,-16,4,-4,12,-6,-1,2,-20,61,
+-9,24,-22,-42,29,6,17,8,4,2,
+-65,15,8,10,5,6,5,3,2,-2,
+-3,5,-9,4,-5,23,13,23,-3,-63,
+3,-5,-4,-6,0,-3,23,-36,-46,9,
+5,5,8,4,9,-5,1,-3,10,1,
+-6,10,-11,24,-47,31,22,-12,14,-10,
+6,11,-7,-7,7,-31,51,-12,-6,7,
+6,-17,9,-11,-20,52,-19,3,-6,-6,
+-8,-5,23,-41,37,1,-21,10,-14,8,
+7,5,-15,-15,23,39,-26,-33,7,2,
+-32,-30,-21,-8,4,12,17,15,14,11};

Added: freeswitch/trunk/libs/speex/libspeex/exc_20_32_table.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/exc_20_32_table.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,66 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: exc_20_32_table.c
+   Codebook for excitation in narrowband CELP mode (2000 bps)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+
+const signed char exc_20_32_table[640] = {
+12,32,25,46,36,33,9,14,-3,6,1,-8,0,-10,-5,-7,-7,-7,-5,-5,
+31,-27,24,-32,-4,10,-11,21,-3,19,23,-9,22,24,-10,-1,-10,-13,-7,-11,
+42,-33,31,19,-8,0,-10,-16,1,-21,-17,10,-8,14,8,4,11,-2,5,-2,
+-33,11,-16,33,11,-4,9,-4,11,2,6,-5,8,-5,11,-4,-6,26,-36,-16,
+0,4,-2,-8,12,6,-1,34,-46,-22,9,9,21,9,5,-66,-5,26,2,10,
+13,2,19,9,12,-81,3,13,13,0,-14,22,-35,6,-7,-4,6,-6,10,-6,
+-31,38,-33,0,-10,-11,5,-12,12,-17,5,0,-6,13,-9,10,8,25,33,2,
+-12,8,-6,10,-2,21,7,17,43,5,11,-7,-9,-20,-36,-20,-23,-4,-4,-3,
+27,-9,-9,-49,-39,-38,-11,-9,6,5,23,25,5,3,3,4,1,2,-3,-1,
+87,39,17,-21,-9,-19,-9,-15,-13,-14,-17,-11,-10,-11,-8,-6,-1,-3,-3,-1,
+-54,-34,-27,-8,-11,-4,-5,0,0,4,8,6,9,7,9,7,6,5,5,5,
+48,10,19,-10,12,-1,9,-3,2,5,-3,2,-2,-2,0,-2,-26,6,9,-7,
+-16,-9,2,7,7,-5,-43,11,22,-11,-9,34,37,-15,-13,-6,1,-1,1,1,
+-64,56,52,-11,-27,5,4,3,1,2,1,3,-1,-4,-4,-10,-7,-4,-4,2,
+-1,-7,-7,-12,-10,-15,-9,-5,-5,-11,-16,-13,6,16,4,-13,-16,-10,-4,2,
+-47,-13,25,47,19,-14,-20,-8,-17,0,-3,-13,1,6,-17,-14,15,1,10,6,
+-24,0,-10,19,-69,-8,14,49,17,-5,33,-29,3,-4,0,2,-8,5,-6,2,
+120,-56,-12,-47,23,-9,6,-5,1,2,-5,1,-10,4,-1,-1,4,-1,0,-3,
+30,-52,-67,30,22,11,-1,-4,3,0,7,2,0,1,-10,-4,-8,-13,5,1,
+1,-1,5,13,-9,-3,-10,-62,22,48,-4,-6,2,3,5,1,1,4,1,13,
+3,-20,10,-9,13,-2,-4,9,-20,44,-1,20,-32,-67,19,0,28,11,8,2,
+-11,15,-19,-53,31,2,34,10,6,-4,-58,8,10,13,14,1,12,2,0,0,
+-128,37,-8,44,-9,26,-3,18,2,6,11,-1,9,1,5,3,0,1,1,2,
+12,3,-2,-3,7,25,9,18,-6,-37,3,-8,-16,3,-10,-7,17,-34,-44,11,
+17,-15,-3,-16,-1,-13,11,-46,-65,-2,8,13,2,4,4,5,15,5,9,6,
+0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+-9,19,-12,12,-28,38,29,-1,12,2,5,23,-10,3,4,-15,21,-4,3,3,
+6,17,-9,-4,-8,-20,26,5,-10,6,1,-19,18,-15,-12,47,-6,-2,-7,-9,
+-1,-17,-2,-2,-14,30,-14,2,-7,-4,-1,-12,11,-25,16,-3,-12,11,-7,7,
+-17,1,19,-28,31,-7,-10,7,-10,3,12,5,-16,6,24,41,-29,-54,0,1,
+7,-1,5,-6,13,10,-4,-8,8,-9,-27,-53,-38,-1,10,19,17,16,12,12,
+0,3,-7,-4,13,12,-31,-14,6,-5,3,5,17,43,50,25,10,1,-6,-2};

Added: freeswitch/trunk/libs/speex/libspeex/exc_5_256_table.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/exc_5_256_table.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,290 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: exc_5_256_table.c
+   Codebook for excitation in narrowband CELP mode (12800 bps)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+
+const signed char exc_5_256_table[1280] = {
+-8,-37,5,-43,5,
+73,61,39,12,-3,
+-61,-32,2,42,30,
+-3,17,-27,9,34,
+20,-1,-5,2,23,
+-7,-46,26,53,-47,
+20,-2,-33,-89,-51,
+-64,27,11,15,-34,
+-5,-56,25,-9,-1,
+-29,1,40,67,-23,
+-16,16,33,19,7,
+14,85,22,-10,-10,
+-12,-7,-1,52,89,
+29,11,-20,-37,-46,
+-15,17,-24,-28,24,
+2,1,0,23,-101,
+23,14,-1,-23,-18,
+9,5,-13,38,1,
+-28,-28,4,27,51,
+-26,34,-40,35,47,
+54,38,-54,-26,-6,
+42,-25,13,-30,-36,
+18,41,-4,-33,23,
+-32,-7,-4,51,-3,
+17,-52,56,-47,36,
+-2,-21,36,10,8,
+-33,31,19,9,-5,
+-40,10,-9,-21,19,
+18,-78,-18,-5,0,
+-26,-36,-47,-51,-44,
+18,40,27,-2,29,
+49,-26,2,32,-54,
+30,-73,54,3,-5,
+36,22,53,10,-1,
+-84,-53,-29,-5,3,
+-44,53,-51,4,22,
+71,-35,-1,33,-5,
+-27,-7,36,17,-23,
+-39,16,-9,-55,-15,
+-20,39,-35,6,-39,
+-14,18,48,-64,-17,
+-15,9,39,81,37,
+-68,37,47,-21,-6,
+-104,13,6,9,-2,
+35,8,-23,18,42,
+45,21,33,-5,-49,
+9,-6,-43,-56,39,
+2,-16,-25,87,1,
+-3,-9,17,-25,-11,
+-9,-1,10,2,-14,
+-14,4,-1,-10,28,
+-23,40,-32,26,-9,
+26,4,-27,-23,3,
+42,-60,1,49,-3,
+27,10,-52,-40,-2,
+18,45,-23,17,-44,
+3,-3,17,-46,52,
+-40,-47,25,75,31,
+-49,53,30,-30,-32,
+-36,38,-6,-15,-16,
+54,-27,-48,3,38,
+-29,-32,-22,-14,-4,
+-23,-13,32,-39,9,
+8,-45,-13,34,-16,
+49,40,32,31,28,
+23,23,32,47,59,
+-68,8,62,44,25,
+-14,-24,-65,-16,36,
+67,-25,-38,-21,4,
+-33,-2,42,5,-63,
+40,11,26,-42,-23,
+-61,79,-31,23,-20,
+10,-32,53,-25,-36,
+10,-26,-5,3,0,
+-71,5,-10,-37,1,
+-24,21,-54,-17,1,
+-29,-25,-15,-27,32,
+68,45,-16,-37,-18,
+-5,1,0,-77,71,
+-6,3,-20,71,-67,
+29,-35,10,-30,19,
+4,16,17,5,0,
+-14,19,2,28,26,
+59,3,2,24,39,
+55,-50,-45,-18,-17,
+33,-35,14,-1,1,
+8,87,-35,-29,0,
+-27,13,-7,23,-13,
+37,-40,50,-35,14,
+19,-7,-14,49,54,
+-5,22,-2,-29,-8,
+-27,38,13,27,48,
+12,-41,-21,-15,28,
+7,-16,-24,-19,-20,
+11,-20,9,2,13,
+23,-20,11,27,-27,
+71,-69,8,2,-6,
+22,12,16,16,9,
+-16,-8,-17,1,25,
+1,40,-37,-33,66,
+94,53,4,-22,-25,
+-41,-42,25,35,-16,
+-15,57,31,-29,-32,
+21,16,-60,45,15,
+-1,7,57,-26,-47,
+-29,11,8,15,19,
+-105,-8,54,27,10,
+-17,6,-12,-1,-10,
+4,0,23,-10,31,
+13,11,10,12,-64,
+23,-3,-8,-19,16,
+52,24,-40,16,10,
+40,5,9,0,-13,
+-7,-21,-8,-6,-7,
+-21,59,16,-53,18,
+-60,11,-47,14,-18,
+25,-13,-24,4,-39,
+16,-28,54,26,-67,
+30,27,-20,-52,20,
+-12,55,12,18,-16,
+39,-14,-6,-26,56,
+-88,-55,12,25,26,
+-37,6,75,0,-34,
+-81,54,-30,1,-7,
+49,-23,-14,21,10,
+-62,-58,-57,-47,-34,
+15,-4,34,-78,31,
+25,-11,7,50,-10,
+42,-63,14,-36,-4,
+57,55,57,53,42,
+-42,-1,15,40,37,
+15,25,-11,6,1,
+31,-2,-6,-1,-7,
+-64,34,28,30,-1,
+3,21,0,-88,-12,
+-56,25,-28,40,8,
+-28,-14,9,12,2,
+-6,-17,22,49,-6,
+-26,14,28,-20,4,
+-12,50,35,40,13,
+-38,-58,-29,17,30,
+22,60,26,-54,-39,
+-12,58,-28,-63,10,
+-21,-8,-12,26,-62,
+6,-10,-11,-22,-6,
+-7,4,1,18,2,
+-70,11,14,4,13,
+19,-24,-34,24,67,
+17,51,-21,13,23,
+54,-30,48,1,-13,
+80,26,-16,-2,13,
+-4,6,-30,29,-24,
+73,-58,30,-27,20,
+-2,-21,41,45,30,
+-27,-3,-5,-18,-20,
+-49,-3,-35,10,42,
+-19,-67,-53,-11,9,
+13,-15,-33,-51,-30,
+15,7,25,-30,4,
+28,-22,-34,54,-29,
+39,-46,20,16,34,
+-4,47,75,1,-44,
+-55,-24,7,-1,9,
+-42,50,-8,-36,41,
+68,0,-4,-10,-23,
+-15,-50,64,36,-9,
+-27,12,25,-38,-47,
+-37,32,-49,51,-36,
+2,-4,69,-26,19,
+7,45,67,46,13,
+-63,46,15,-47,4,
+-41,13,-6,5,-21,
+37,26,-55,-7,33,
+-1,-28,10,-17,-64,
+-14,0,-36,-17,93,
+-3,-9,-66,44,-21,
+3,-12,38,-6,-13,
+-12,19,13,43,-43,
+-10,-12,6,-5,9,
+-49,32,-5,2,4,
+5,15,-16,10,-21,
+8,-62,-8,64,8,
+79,-1,-66,-49,-18,
+5,40,-5,-30,-45,
+1,-6,21,-32,93,
+-18,-30,-21,32,21,
+-18,22,8,5,-41,
+-54,80,22,-10,-7,
+-8,-23,-64,66,56,
+-14,-30,-41,-46,-14,
+-29,-37,27,-14,42,
+-2,-9,-29,34,14,
+33,-14,22,4,10,
+26,26,28,32,23,
+-72,-32,3,0,-14,
+35,-42,-78,-32,6,
+29,-18,-45,-5,7,
+-33,-45,-3,-22,-34,
+8,-8,4,-51,-25,
+-9,59,-78,21,-5,
+-25,-48,66,-15,-17,
+-24,-49,-13,25,-23,
+-64,-6,40,-24,-19,
+-11,57,-33,-8,1,
+10,-52,-54,28,39,
+49,34,-11,-61,-41,
+-43,10,15,-15,51,
+30,15,-51,32,-34,
+-2,-34,14,18,16,
+1,1,-3,-3,1,
+1,-18,6,16,48,
+12,-5,-42,7,36,
+48,7,-20,-10,7,
+12,2,54,39,-38,
+37,54,4,-11,-8,
+-46,-10,5,-10,-34,
+46,-12,29,-37,39,
+36,-11,24,56,17,
+14,20,25,0,-25,
+-28,55,-7,-5,27,
+3,9,-26,-8,6,
+-24,-10,-30,-31,-34,
+18,4,22,21,40,
+-1,-29,-37,-8,-21,
+92,-29,11,-3,11,
+73,23,22,7,4,
+-44,-9,-11,21,-13,
+11,9,-78,-1,47,
+114,-12,-37,-19,-5,
+-11,-22,19,12,-30,
+7,38,45,-21,-8,
+-9,55,-45,56,-21,
+7,17,46,-57,-87,
+-6,27,31,31,7,
+-56,-12,46,21,-5,
+-12,36,3,3,-21,
+43,19,12,-7,9,
+-14,0,-9,-33,-91,
+7,26,3,-11,64,
+83,-31,-46,25,2,
+9,5,2,2,-1,
+20,-17,10,-5,-27,
+-8,20,8,-19,16,
+-21,-13,-31,5,5,
+42,24,9,34,-20,
+28,-61,22,11,-39,
+64,-20,-1,-30,-9,
+-20,24,-25,-24,-29,
+22,-60,6,-5,41,
+-9,-87,14,34,15,
+-57,52,69,15,-3,
+-102,58,16,3,6,
+60,-75,-32,26,7,
+-57,-27,-32,-24,-21,
+-29,-16,62,-46,31,
+30,-27,-15,7,15};

Added: freeswitch/trunk/libs/speex/libspeex/exc_5_64_table.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/exc_5_64_table.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,98 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: exc_5_64_table.c
+   Codebook for excitation in narrowband CELP mode (9600 bps)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+
+const signed char exc_5_64_table[320]={
+1,5,-15,49,-66,
+-48,-4,50,-44,7,
+37,16,-18,25,-26,
+-26,-15,19,19,-27,
+-47,28,57,5,-17,
+-32,-41,68,21,-2,
+64,56,8,-16,-13,
+-26,-9,-16,11,6,
+-39,25,-19,22,-31,
+20,-45,55,-43,10,
+-16,47,-40,40,-20,
+-51,3,-17,-14,-15,
+-24,53,-20,-46,46,
+27,-68,32,3,-18,
+-5,9,-31,16,-9,
+-10,-1,-23,48,95,
+47,25,-41,-32,-3,
+15,-25,-55,36,41,
+-27,20,5,13,14,
+-22,5,2,-23,18,
+46,-15,17,-18,-34,
+-5,-8,27,-55,73,
+16,2,-1,-17,40,
+-78,33,0,2,19,
+4,53,-16,-15,-16,
+-28,-3,-13,49,8,
+-7,-29,27,-13,32,
+20,32,-61,16,14,
+41,44,40,24,20,
+7,4,48,-60,-77,
+17,-6,-48,65,-15,
+32,-30,-71,-10,-3,
+-6,10,-2,-7,-29,
+-56,67,-30,7,-5,
+86,-6,-10,0,5,
+-31,60,34,-38,-3,
+24,10,-2,30,23,
+24,-41,12,70,-43,
+15,-17,6,13,16,
+-13,8,30,-15,-8,
+5,23,-34,-98,-4,
+-13,13,-48,-31,70,
+12,31,25,24,-24,
+26,-7,33,-16,8,
+5,-11,-14,-8,-65,
+13,10,-2,-9,0,
+-3,-68,5,35,7,
+0,-31,-1,-17,-9,
+-9,16,-37,-18,-1,
+69,-48,-28,22,-21,
+-11,5,49,55,23,
+-86,-36,16,2,13,
+63,-51,30,-11,13,
+24,-18,-6,14,-19,
+1,41,9,-5,27,
+-36,-44,-34,-37,-21,
+-26,31,-39,15,43,
+5,-8,29,20,-8,
+-20,-52,-28,-1,13,
+26,-34,-10,-9,27,
+-8,8,27,-66,4,
+12,-22,49,10,-77,
+32,-18,3,-38,12,
+-3,-1,2,2,0};

Added: freeswitch/trunk/libs/speex/libspeex/exc_8_128_table.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/exc_8_128_table.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,162 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: exc_8_128_table.c
+   Codebook for excitation in narrowband CELP mode (7000 bps)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+
+const signed char exc_8_128_table[1024] = {
+-14,9,13,-32,2,-10,31,-10,
+-8,-8,6,-4,-1,10,-64,23,
+6,20,13,6,8,-22,16,34,
+7,42,-49,-28,5,26,4,-15,
+41,34,41,32,33,24,23,14,
+8,40,34,4,-24,-41,-19,-15,
+13,-13,33,-54,24,27,-44,33,
+27,-15,-15,24,-19,14,-36,14,
+-9,24,-12,-4,37,-5,16,-34,
+5,10,33,-15,-54,-16,12,25,
+12,1,2,0,3,-1,-4,-4,
+11,2,-56,54,27,-20,13,-6,
+-46,-41,-33,-11,-5,7,12,14,
+-14,-5,8,20,6,3,4,-8,
+-5,-42,11,8,-14,25,-2,2,
+13,11,-22,39,-9,9,5,-45,
+-9,7,-9,12,-7,34,-17,-102,
+7,2,-42,18,35,-9,-34,11,
+-5,-2,3,22,46,-52,-25,-9,
+-94,8,11,-5,-5,-5,4,-7,
+-35,-7,54,5,-32,3,24,-9,
+-22,8,65,37,-1,-12,-23,-6,
+-9,-28,55,-33,14,-3,2,18,
+-60,41,-17,8,-16,17,-11,0,
+-11,29,-28,37,9,-53,33,-14,
+-9,7,-25,-7,-11,26,-32,-8,
+24,-21,22,-19,19,-10,29,-14,
+0,0,0,0,0,0,0,0,
+-5,-52,10,41,6,-30,-4,16,
+32,22,-27,-22,32,-3,-28,-3,
+3,-35,6,17,23,21,8,2,
+4,-45,-17,14,23,-4,-31,-11,
+-3,14,1,19,-11,2,61,-8,
+9,-12,7,-10,12,-3,-24,99,
+-48,23,50,-37,-5,-23,0,8,
+-14,35,-64,-5,46,-25,13,-1,
+-49,-19,-15,9,34,50,25,11,
+-6,-9,-16,-20,-32,-33,-32,-27,
+10,-8,12,-15,56,-14,-32,33,
+3,-9,1,65,-9,-9,-10,-2,
+-6,-23,9,17,3,-28,13,-32,
+4,-2,-10,4,-16,76,12,-52,
+6,13,33,-6,4,-14,-9,-3,
+1,-15,-16,28,1,-15,11,16,
+9,4,-21,-37,-40,-6,22,12,
+-15,-23,-14,-17,-16,-9,-10,-9,
+13,-39,41,5,-9,16,-38,25,
+46,-47,4,49,-14,17,-2,6,
+18,5,-6,-33,-22,44,50,-2,
+1,3,-6,7,7,-3,-21,38,
+-18,34,-14,-41,60,-13,6,16,
+-24,35,19,-13,-36,24,3,-17,
+-14,-10,36,44,-44,-29,-3,3,
+-54,-8,12,55,26,4,-2,-5,
+2,-11,22,-23,2,22,1,-25,
+-39,66,-49,21,-8,-2,10,-14,
+-60,25,6,10,27,-25,16,5,
+-2,-9,26,-13,-20,58,-2,7,
+52,-9,2,5,-4,-15,23,-1,
+-38,23,8,27,-6,0,-27,-7,
+39,-10,-14,26,11,-45,-12,9,
+-5,34,4,-35,10,43,-22,-11,
+56,-7,20,1,10,1,-26,9,
+94,11,-27,-14,-13,1,-11,0,
+14,-5,-6,-10,-4,-15,-8,-41,
+21,-5,1,-28,-8,22,-9,33,
+-23,-4,-4,-12,39,4,-7,3,
+-60,80,8,-17,2,-6,12,-5,
+1,9,15,27,31,30,27,23,
+61,47,26,10,-5,-8,-12,-13,
+5,-18,25,-15,-4,-15,-11,12,
+-2,-2,-16,-2,-6,24,12,11,
+-4,9,1,-9,14,-45,57,12,
+20,-35,26,11,-64,32,-10,-10,
+42,-4,-9,-16,32,24,7,10,
+52,-11,-57,29,0,8,0,-6,
+17,-17,-56,-40,7,20,18,12,
+-6,16,5,7,-1,9,1,10,
+29,12,16,13,-2,23,7,9,
+-3,-4,-5,18,-64,13,55,-25,
+9,-9,24,14,-25,15,-11,-40,
+-30,37,1,-19,22,-5,-31,13,
+-2,0,7,-4,16,-67,12,66,
+-36,24,-8,18,-15,-23,19,0,
+-45,-7,4,3,-13,13,35,5,
+13,33,10,27,23,0,-7,-11,
+43,-74,36,-12,2,5,-8,6,
+-33,11,-16,-14,-5,-7,-3,17,
+-34,27,-16,11,-9,15,33,-31,
+8,-16,7,-6,-7,63,-55,-17,
+11,-1,20,-46,34,-30,6,9,
+19,28,-9,5,-24,-8,-23,-2,
+31,-19,-16,-5,-15,-18,0,26,
+18,37,-5,-15,-2,17,5,-27,
+21,-33,44,12,-27,-9,17,11,
+25,-21,-31,-7,13,33,-8,-25,
+-7,7,-10,4,-6,-9,48,-82,
+-23,-8,6,11,-23,3,-3,49,
+-29,25,31,4,14,16,9,-4,
+-18,10,-26,3,5,-44,-9,9,
+-47,-55,15,9,28,1,4,-3,
+46,6,-6,-38,-29,-31,-15,-6,
+3,0,14,-6,8,-54,-50,33,
+-5,1,-14,33,-48,26,-4,-5,
+-3,-5,-3,-5,-28,-22,77,55,
+-1,2,10,10,-9,-14,-66,-49,
+11,-36,-6,-20,10,-10,16,12,
+4,-1,-16,45,-44,-50,31,-2,
+25,42,23,-32,-22,0,11,20,
+-40,-35,-40,-36,-32,-26,-21,-13,
+52,-22,6,-24,-20,17,-5,-8,
+36,-25,-11,21,-26,6,34,-8,
+7,20,-3,5,-25,-8,18,-5,
+-9,-4,1,-9,20,20,39,48,
+-24,9,5,-65,22,29,4,3,
+-43,-11,32,-6,9,19,-27,-10,
+-47,-14,24,10,-7,-36,-7,-1,
+-4,-5,-5,16,53,25,-26,-29,
+-4,-12,45,-58,-34,33,-5,2,
+-1,27,-48,31,-15,22,-5,4,
+7,7,-25,-3,11,-22,16,-12,
+8,-3,7,-11,45,14,-73,-19,
+56,-46,24,-20,28,-12,-2,-1,
+-36,-3,-33,19,-6,7,2,-15,
+5,-31,-45,8,35,13,20,0,
+-9,48,-13,-43,-3,-13,2,-5,
+72,-68,-27,2,1,-2,-7,5,
+36,33,-40,-12,-4,-5,23,19};

Added: freeswitch/trunk/libs/speex/libspeex/fftwrap.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/fftwrap.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,315 @@
+/* Copyright (C) 2005-2006 Jean-Marc Valin 
+   File: fftwrap.c
+
+   Wrapper for various FFTs 
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+/*#define USE_SMALLFT*/
+#define USE_KISS_FFT
+
+
+#include "misc.h"
+
+#define MAX_FFT_SIZE 2048
+
+#ifdef FIXED_POINT
+static int maximize_range(spx_word16_t *in, spx_word16_t *out, spx_word16_t bound, int len)
+{
+   int i, shift;
+   spx_word16_t max_val = 0;
+   for (i=0;i<len;i++)
+   {
+      if (in[i]>max_val)
+         max_val = in[i];
+      if (-in[i]>max_val)
+         max_val = -in[i];
+   }
+   shift=0;
+   while (max_val <= (bound>>1) && max_val != 0)
+   {
+      max_val <<= 1;
+      shift++;
+   }
+   for (i=0;i<len;i++)
+   {
+      out[i] = in[i] << shift;
+   }   
+   return shift;
+}
+
+static void renorm_range(spx_word16_t *in, spx_word16_t *out, int shift, int len)
+{
+   int i;
+   for (i=0;i<len;i++)
+   {
+      out[i] = (in[i] + (1<<(shift-1))) >> shift;
+   }
+}
+#endif
+
+#ifdef USE_SMALLFT
+
+#include "smallft.h"
+#include <math.h>
+
+void *spx_fft_init(int size)
+{
+   struct drft_lookup *table;
+   table = speex_alloc(sizeof(struct drft_lookup));
+   spx_drft_init((struct drft_lookup *)table, size);
+   return (void*)table;
+}
+
+void spx_fft_destroy(void *table)
+{
+   spx_drft_clear(table);
+   speex_free(table);
+}
+
+void spx_fft(void *table, float *in, float *out)
+{
+   if (in==out)
+   {
+      int i;
+      speex_warning("FFT should not be done in-place");
+      float scale = 1./((struct drft_lookup *)table)->n;
+      for (i=0;i<((struct drft_lookup *)table)->n;i++)
+         out[i] = scale*in[i];
+   } else {
+      int i;
+      float scale = 1./((struct drft_lookup *)table)->n;
+      for (i=0;i<((struct drft_lookup *)table)->n;i++)
+         out[i] = scale*in[i];
+   }
+   spx_drft_forward((struct drft_lookup *)table, out);
+}
+
+void spx_ifft(void *table, float *in, float *out)
+{
+   if (in==out)
+   {
+      int i;
+      speex_warning("FFT should not be done in-place");
+   } else {
+      int i;
+      for (i=0;i<((struct drft_lookup *)table)->n;i++)
+         out[i] = in[i];
+   }
+   spx_drft_backward((struct drft_lookup *)table, out);
+}
+
+#elif defined(USE_KISS_FFT)
+
+#include "kiss_fftr.h"
+#include "kiss_fft.h"
+
+struct kiss_config {
+   kiss_fftr_cfg forward;
+   kiss_fftr_cfg backward;
+   kiss_fft_cpx *freq_data;
+   int N;
+};
+
+void *spx_fft_init(int size)
+{
+   struct kiss_config *table;
+   table = (struct kiss_config*)speex_alloc(sizeof(struct kiss_config));
+   table->freq_data = (kiss_fft_cpx*)speex_alloc(sizeof(kiss_fft_cpx)*((size>>1)+1));
+   table->forward = kiss_fftr_alloc(size,0,NULL,NULL);
+   table->backward = kiss_fftr_alloc(size,1,NULL,NULL);
+   table->N = size;
+   return table;
+}
+
+void spx_fft_destroy(void *table)
+{
+   struct kiss_config *t = (struct kiss_config *)table;
+   kiss_fftr_free(t->forward);
+   kiss_fftr_free(t->backward);
+   speex_free(t->freq_data);
+   speex_free(table);
+}
+
+#ifdef FIXED_POINT
+
+void spx_fft(void *table, spx_word16_t *in, spx_word16_t *out)
+{
+   int i;
+   int shift;
+   struct kiss_config *t = (struct kiss_config *)table;
+   shift = maximize_range(in, in, 32000, t->N);
+   kiss_fftr(t->forward, in, t->freq_data);
+   out[0] = t->freq_data[0].r;
+   for (i=1;i<t->N>>1;i++)
+   {
+      out[(i<<1)-1] = t->freq_data[i].r;
+      out[(i<<1)] = t->freq_data[i].i;
+   }
+   out[(i<<1)-1] = t->freq_data[i].r;
+   renorm_range(in, in, shift, t->N);
+   renorm_range(out, out, shift, t->N);
+}
+
+#else
+
+void spx_fft(void *table, spx_word16_t *in, spx_word16_t *out)
+{
+   int i;
+   float scale;
+   struct kiss_config *t = (struct kiss_config *)table;
+   scale = 1./t->N;
+   kiss_fftr(t->forward, in, t->freq_data);
+   out[0] = scale*t->freq_data[0].r;
+   for (i=1;i<t->N>>1;i++)
+   {
+      out[(i<<1)-1] = scale*t->freq_data[i].r;
+      out[(i<<1)] = scale*t->freq_data[i].i;
+   }
+   out[(i<<1)-1] = scale*t->freq_data[i].r;
+}
+#endif
+
+void spx_ifft(void *table, spx_word16_t *in, spx_word16_t *out)
+{
+   int i;
+   struct kiss_config *t = (struct kiss_config *)table;
+   t->freq_data[0].r = in[0];
+   t->freq_data[0].i = 0;
+   for (i=1;i<t->N>>1;i++)
+   {
+      t->freq_data[i].r = in[(i<<1)-1];
+      t->freq_data[i].i = in[(i<<1)];
+   }
+   t->freq_data[i].r = in[(i<<1)-1];
+   t->freq_data[i].i = 0;
+
+   kiss_fftri(t->backward, t->freq_data, out);
+}
+
+
+#else
+
+#error No other FFT implemented
+
+#endif
+
+
+#ifdef FIXED_POINT
+/*#include "smallft.h"*/
+
+
+void spx_fft_float(void *table, float *in, float *out)
+{
+   int i;
+#ifdef USE_SMALLFT
+   int N = ((struct drft_lookup *)table)->n;
+#elif defined(USE_KISS_FFT)
+   int N = ((struct kiss_config *)table)->N;
+#else
+#endif
+#ifdef VAR_ARRAYS
+   spx_word16_t _in[N];
+   spx_word16_t _out[N];
+#else
+   spx_word16_t _in[MAX_FFT_SIZE];
+   spx_word16_t _out[MAX_FFT_SIZE];
+#endif
+   for (i=0;i<N;i++)
+      _in[i] = (int)floor(.5+in[i]);
+   spx_fft(table, _in, _out);
+   for (i=0;i<N;i++)
+      out[i] = _out[i];
+#if 0
+   if (!fixed_point)
+   {
+      float scale;
+      struct drft_lookup t;
+      spx_drft_init(&t, ((struct kiss_config *)table)->N);
+      scale = 1./((struct kiss_config *)table)->N;
+      for (i=0;i<((struct kiss_config *)table)->N;i++)
+         out[i] = scale*in[i];
+      spx_drft_forward(&t, out);
+      spx_drft_clear(&t);
+   }
+#endif
+}
+
+void spx_ifft_float(void *table, float *in, float *out)
+{
+   int i;
+#ifdef USE_SMALLFT
+   int N = ((struct drft_lookup *)table)->n;
+#elif defined(USE_KISS_FFT)
+   int N = ((struct kiss_config *)table)->N;
+#else
+#endif
+#ifdef VAR_ARRAYS
+   spx_word16_t _in[N];
+   spx_word16_t _out[N];
+#else
+   spx_word16_t _in[MAX_FFT_SIZE];
+   spx_word16_t _out[MAX_FFT_SIZE];
+#endif
+   for (i=0;i<N;i++)
+      _in[i] = (int)floor(.5+in[i]);
+   spx_ifft(table, _in, _out);
+   for (i=0;i<N;i++)
+      out[i] = _out[i];
+#if 0
+   if (!fixed_point)
+   {
+      int i;
+      struct drft_lookup t;
+      spx_drft_init(&t, ((struct kiss_config *)table)->N);
+      for (i=0;i<((struct kiss_config *)table)->N;i++)
+         out[i] = in[i];
+      spx_drft_backward(&t, out);
+      spx_drft_clear(&t);
+   }
+#endif
+}
+
+#else
+
+void spx_fft_float(void *table, float *in, float *out)
+{
+   spx_fft(table, in, out);
+}
+void spx_ifft_float(void *table, float *in, float *out)
+{
+   spx_ifft(table, in, out);
+}
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/fftwrap.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/fftwrap.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,58 @@
+/* Copyright (C) 2005 Jean-Marc Valin 
+   File: fftwrap.h
+
+   Wrapper for various FFTs 
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifndef FFTWRAP_H
+#define FFTWRAP_H
+
+#include "misc.h"
+
+/** Compute tables for an FFT */
+void *spx_fft_init(int size);
+
+/** Destroy tables for an FFT */
+void spx_fft_destroy(void *table);
+
+/** Forward (real to half-complex) transform */
+void spx_fft(void *table, spx_word16_t *in, spx_word16_t *out);
+
+/** Backward (half-complex to real) transform */
+void spx_ifft(void *table, spx_word16_t *in, spx_word16_t *out);
+
+/** Forward (real to half-complex) transform of float data */
+void spx_fft_float(void *table, float *in, float *out);
+
+/** Backward (half-complex to real) transform of float data */
+void spx_ifft_float(void *table, float *in, float *out);
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/filters.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/filters.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,902 @@
+/* Copyright (C) 2002-2006 Jean-Marc Valin 
+   File: filters.c
+   Various analysis/synthesis filters
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "filters.h"
+#include "stack_alloc.h"
+#include "misc.h"
+#include "math_approx.h"
+#include "ltp.h"
+#include <math.h>
+
+#ifdef _USE_SSE
+#include "filters_sse.h"
+#elif defined (ARM4_ASM) || defined(ARM5E_ASM)
+#include "filters_arm4.h"
+#elif defined (BFIN_ASM)
+#include "filters_bfin.h"
+#endif
+
+
+
+void bw_lpc(spx_word16_t gamma, const spx_coef_t *lpc_in, spx_coef_t *lpc_out, int order)
+{
+   int i;
+   spx_word16_t tmp=gamma;
+   for (i=0;i<order;i++)
+   {
+      lpc_out[i] = MULT16_16_P15(tmp,lpc_in[i]);
+      tmp = MULT16_16_P15(tmp, gamma);
+   }
+}
+
+void highpass(const spx_word16_t *x, spx_word16_t *y, int len, int filtID, spx_mem_t *mem)
+{
+   int i;
+#ifdef FIXED_POINT
+   const spx_word16_t Pcoef[5][3] = {{16384, -31313, 14991}, {16384, -31569, 15249}, {16384, -31677, 15328}, {16384, -32313, 15947}, {16384, -22446, 6537}};
+   const spx_word16_t Zcoef[5][3] = {{15672, -31344, 15672}, {15802, -31601, 15802}, {15847, -31694, 15847}, {16162, -32322, 16162}, {14418, -28836, 14418}};
+#else
+   const spx_word16_t Pcoef[5][3] = {{1.00000f, -1.91120f, 0.91498f}, {1.00000f, -1.92683f, 0.93071f}, {1.00000f, -1.93338f, 0.93553f}, {1.00000f, -1.97226f, 0.97332f}, {1.00000f, -1.37000f, 0.39900f}};
+   const spx_word16_t Zcoef[5][3] = {{0.95654f, -1.91309f, 0.95654f}, {0.96446f, -1.92879f, 0.96446f}, {0.96723f, -1.93445f, 0.96723f}, {0.98645f, -1.97277f, 0.98645f}, {0.88000f, -1.76000f, 0.88000f}};
+#endif
+   const spx_word16_t *den, *num;
+   if (filtID>4)
+      filtID=4;
+   
+   den = Pcoef[filtID]; num = Zcoef[filtID];
+   /*return;*/
+   for (i=0;i<len;i++)
+   {
+      spx_word16_t yi;
+      spx_word32_t vout = ADD32(MULT16_16(num[0], x[i]),mem[0]);
+      yi = EXTRACT16(SATURATE(PSHR32(vout,14),32767));
+      mem[0] = ADD32(MAC16_16(mem[1], num[1],x[i]), MULT16_32_Q14(-den[1],vout));
+      mem[1] = ADD32(MULT16_16(num[2],x[i]), MULT16_32_Q14(-den[2],vout));
+      y[i] = yi;
+   }
+}
+
+#ifdef FIXED_POINT
+
+/* FIXME: These functions are ugly and probably introduce too much error */
+void signal_mul(const spx_sig_t *x, spx_sig_t *y, spx_word32_t scale, int len)
+{
+   int i;
+   for (i=0;i<len;i++)
+   {
+      y[i] = SHL32(MULT16_32_Q14(EXTRACT16(SHR32(x[i],7)),scale),7);
+   }
+}
+
+void signal_div(const spx_word16_t *x, spx_word16_t *y, spx_word32_t scale, int len)
+{
+   int i;
+   if (scale > SHL32(EXTEND32(SIG_SCALING), 8))
+   {
+      spx_word16_t scale_1;
+      scale = PSHR32(scale, SIG_SHIFT);
+      scale_1 = EXTRACT16(PDIV32_16(SHL32(EXTEND32(SIG_SCALING),7),scale));
+      for (i=0;i<len;i++)
+      {
+         y[i] = MULT16_16_P15(scale_1, x[i]);
+      }
+   } else if (scale > SHR32(EXTEND32(SIG_SCALING), 2)) {
+      spx_word16_t scale_1;
+      scale = PSHR32(scale, SIG_SHIFT-5);
+      scale_1 = DIV32_16(SHL32(EXTEND32(SIG_SCALING),3),scale);
+      for (i=0;i<len;i++)
+      {
+         y[i] = PSHR32(MULT16_16(scale_1, SHL16(x[i],2)),8);
+      }
+   } else {
+      spx_word16_t scale_1;
+      scale = PSHR32(scale, SIG_SHIFT-7);
+      if (scale < 5)
+         scale = 5;
+      scale_1 = DIV32_16(SHL32(EXTEND32(SIG_SCALING),3),scale);
+      for (i=0;i<len;i++)
+      {
+         y[i] = PSHR32(MULT16_16(scale_1, SHL16(x[i],2)),6);
+      }
+   }
+}
+
+#else
+
+void signal_mul(const spx_sig_t *x, spx_sig_t *y, spx_word32_t scale, int len)
+{
+   int i;
+   for (i=0;i<len;i++)
+      y[i] = scale*x[i];
+}
+
+void signal_div(const spx_sig_t *x, spx_sig_t *y, spx_word32_t scale, int len)
+{
+   int i;
+   float scale_1 = 1/scale;
+   for (i=0;i<len;i++)
+      y[i] = scale_1*x[i];
+}
+#endif
+
+
+
+#ifdef FIXED_POINT
+
+
+
+spx_word16_t compute_rms(const spx_sig_t *x, int len)
+{
+   int i;
+   spx_word32_t sum=0;
+   spx_sig_t max_val=1;
+   int sig_shift;
+
+   for (i=0;i<len;i++)
+   {
+      spx_sig_t tmp = x[i];
+      if (tmp<0)
+         tmp = -tmp;
+      if (tmp > max_val)
+         max_val = tmp;
+   }
+
+   sig_shift=0;
+   while (max_val>16383)
+   {
+      sig_shift++;
+      max_val >>= 1;
+   }
+
+   for (i=0;i<len;i+=4)
+   {
+      spx_word32_t sum2=0;
+      spx_word16_t tmp;
+      tmp = EXTRACT16(SHR32(x[i],sig_shift));
+      sum2 = MAC16_16(sum2,tmp,tmp);
+      tmp = EXTRACT16(SHR32(x[i+1],sig_shift));
+      sum2 = MAC16_16(sum2,tmp,tmp);
+      tmp = EXTRACT16(SHR32(x[i+2],sig_shift));
+      sum2 = MAC16_16(sum2,tmp,tmp);
+      tmp = EXTRACT16(SHR32(x[i+3],sig_shift));
+      sum2 = MAC16_16(sum2,tmp,tmp);
+      sum = ADD32(sum,SHR32(sum2,6));
+   }
+   
+   return EXTRACT16(PSHR32(SHL32(EXTEND32(spx_sqrt(DIV32(sum,len))),(sig_shift+3)),SIG_SHIFT));
+}
+
+spx_word16_t compute_rms16(const spx_word16_t *x, int len)
+{
+   int i;
+   spx_word16_t max_val=10; 
+
+   for (i=0;i<len;i++)
+   {
+      spx_sig_t tmp = x[i];
+      if (tmp<0)
+         tmp = -tmp;
+      if (tmp > max_val)
+         max_val = tmp;
+   }
+   if (max_val>16383)
+   {
+      spx_word32_t sum=0;
+      for (i=0;i<len;i+=4)
+      {
+         spx_word32_t sum2=0;
+         sum2 = MAC16_16(sum2,PSHR16(x[i],1),PSHR16(x[i],1));
+         sum2 = MAC16_16(sum2,PSHR16(x[i+1],1),PSHR16(x[i+1],1));
+         sum2 = MAC16_16(sum2,PSHR16(x[i+2],1),PSHR16(x[i+2],1));
+         sum2 = MAC16_16(sum2,PSHR16(x[i+3],1),PSHR16(x[i+3],1));
+         sum = ADD32(sum,SHR32(sum2,6));
+      }
+      return SHL16(spx_sqrt(DIV32(sum,len)),4);
+   } else {
+      spx_word32_t sum=0;
+      int sig_shift=0;
+      if (max_val < 8192)
+         sig_shift=1;
+      if (max_val < 4096)
+         sig_shift=2;
+      if (max_val < 2048)
+         sig_shift=3;
+      for (i=0;i<len;i+=4)
+      {
+         spx_word32_t sum2=0;
+         sum2 = MAC16_16(sum2,SHL16(x[i],sig_shift),SHL16(x[i],sig_shift));
+         sum2 = MAC16_16(sum2,SHL16(x[i+1],sig_shift),SHL16(x[i+1],sig_shift));
+         sum2 = MAC16_16(sum2,SHL16(x[i+2],sig_shift),SHL16(x[i+2],sig_shift));
+         sum2 = MAC16_16(sum2,SHL16(x[i+3],sig_shift),SHL16(x[i+3],sig_shift));
+         sum = ADD32(sum,SHR32(sum2,6));
+      }
+      return SHL16(spx_sqrt(DIV32(sum,len)),3-sig_shift);   
+   }
+}
+
+#ifndef OVERRIDE_NORMALIZE16
+int normalize16(const spx_sig_t *x, spx_word16_t *y, spx_sig_t max_scale, int len)
+{
+   int i;
+   spx_sig_t max_val=1;
+   int sig_shift;
+   
+   for (i=0;i<len;i++)
+   {
+      spx_sig_t tmp = x[i];
+      if (tmp<0)
+         tmp = NEG32(tmp);
+      if (tmp >= max_val)
+         max_val = tmp;
+   }
+
+   sig_shift=0;
+   while (max_val>max_scale)
+   {
+      sig_shift++;
+      max_val >>= 1;
+   }
+
+   for (i=0;i<len;i++)
+      y[i] = EXTRACT16(SHR32(x[i], sig_shift));
+   
+   return sig_shift;
+}
+#endif
+
+#else
+
+spx_word16_t compute_rms(const spx_sig_t *x, int len)
+{
+   int i;
+   float sum=0;
+   for (i=0;i<len;i++)
+   {
+      sum += x[i]*x[i];
+   }
+   return sqrt(.1+sum/len);
+}
+spx_word16_t compute_rms16(const spx_word16_t *x, int len)
+{
+   return compute_rms(x, len);
+}
+#endif
+
+
+
+#ifndef OVERRIDE_FILTER_MEM2
+#ifdef PRECISION16
+void filter_mem2(const spx_sig_t *x, const spx_coef_t *num, const spx_coef_t *den, spx_sig_t *y, int N, int ord, spx_mem_t *mem)
+{
+   int i,j;
+   spx_word16_t xi,yi,nyi;
+
+   for (i=0;i<N;i++)
+   {
+      xi= EXTRACT16(PSHR32(SATURATE(x[i],536870911),SIG_SHIFT));
+      yi = EXTRACT16(PSHR32(SATURATE(ADD32(x[i], SHL32(mem[0],1)),536870911),SIG_SHIFT));
+      nyi = NEG16(yi);
+      for (j=0;j<ord-1;j++)
+      {
+         mem[j] = MAC16_16(MAC16_16(mem[j+1], num[j],xi), den[j],nyi);
+      }
+      mem[ord-1] = ADD32(MULT16_16(num[ord-1],xi), MULT16_16(den[ord-1],nyi));
+      y[i] = SHL32(EXTEND32(yi),SIG_SHIFT);
+   }
+}
+#else
+void filter_mem2(const spx_sig_t *x, const spx_coef_t *num, const spx_coef_t *den, spx_sig_t *y, int N, int ord, spx_mem_t *mem)
+{
+   int i,j;
+   spx_sig_t xi,yi,nyi;
+
+   for (i=0;i<ord;i++)
+      mem[i] = SHR32(mem[i],1);   
+   for (i=0;i<N;i++)
+   {
+      xi=SATURATE(x[i],805306368);
+      yi = SATURATE(ADD32(xi, SHL32(mem[0],2)),805306368);
+      nyi = NEG32(yi);
+      for (j=0;j<ord-1;j++)
+      {
+         mem[j] = MAC16_32_Q15(MAC16_32_Q15(mem[j+1], num[j],xi), den[j],nyi);
+      }
+      mem[ord-1] = SUB32(MULT16_32_Q15(num[ord-1],xi), MULT16_32_Q15(den[ord-1],yi));
+      y[i] = yi;
+   }
+   for (i=0;i<ord;i++)
+      mem[i] = SHL32(mem[i],1);   
+}
+#endif
+#endif
+
+#ifdef FIXED_POINT
+#ifndef OVERRIDE_FILTER_MEM16
+void filter_mem16(const spx_word16_t *x, const spx_coef_t *num, const spx_coef_t *den, spx_word16_t *y, int N, int ord, spx_mem_t *mem, char *stack)
+{
+   int i,j;
+   spx_word16_t xi,yi,nyi;
+   for (i=0;i<N;i++)
+   {
+      xi= x[i];
+      yi = EXTRACT16(SATURATE(ADD32(EXTEND32(x[i]),PSHR32(mem[0],LPC_SHIFT)),32767));
+      nyi = NEG16(yi);
+      for (j=0;j<ord-1;j++)
+      {
+         mem[j] = MAC16_16(MAC16_16(mem[j+1], num[j],xi), den[j],nyi);
+      }
+      mem[ord-1] = ADD32(MULT16_16(num[ord-1],xi), MULT16_16(den[ord-1],nyi));
+      y[i] = yi;
+   }
+}
+#endif
+#else
+void filter_mem16(const spx_word16_t *x, const spx_coef_t *num, const spx_coef_t *den, spx_word16_t *y, int N, int ord, spx_mem_t *mem, char *stack)
+{
+   filter_mem2(x, num, den, y, N, ord, mem);
+}
+#endif
+
+
+#ifndef OVERRIDE_IIR_MEM2
+#ifdef PRECISION16
+void iir_mem2(const spx_sig_t *x, const spx_coef_t *den, spx_sig_t *y, int N, int ord, spx_mem_t *mem)
+{
+   int i,j;
+   spx_word16_t yi,nyi;
+
+   for (i=0;i<N;i++)
+   {
+      yi = EXTRACT16(PSHR32(SATURATE(x[i] + SHL32(mem[0],1),536870911),SIG_SHIFT));
+      nyi = NEG16(yi);
+      for (j=0;j<ord-1;j++)
+      {
+         mem[j] = MAC16_16(mem[j+1],den[j],nyi);
+      }
+      mem[ord-1] = MULT16_16(den[ord-1],nyi);
+      y[i] = SHL32(EXTEND32(yi),SIG_SHIFT);
+   }
+}
+#else
+void iir_mem2(const spx_sig_t *x, const spx_coef_t *den, spx_sig_t *y, int N, int ord, spx_mem_t *mem)
+{
+   int i,j;
+   spx_word32_t xi,yi,nyi;
+
+   for (i=0;i<ord;i++)
+      mem[i] = SHR32(mem[i],1);   
+   for (i=0;i<N;i++)
+   {
+      xi=SATURATE(x[i],805306368);
+      yi = SATURATE(xi + SHL32(mem[0],2),805306368);
+      nyi = NEG32(yi);
+      for (j=0;j<ord-1;j++)
+      {
+         mem[j] = MAC16_32_Q15(mem[j+1],den[j],nyi);
+      }
+      mem[ord-1] = MULT16_32_Q15(den[ord-1],nyi);
+      y[i] = yi;
+   }
+   for (i=0;i<ord;i++)
+      mem[i] = SHL32(mem[i],1);   
+}
+#endif
+#endif
+
+#ifdef FIXED_POINT
+#ifndef OVERRIDE_IIR_MEM16
+void iir_mem16(const spx_word16_t *x, const spx_coef_t *den, spx_word16_t *y, int N, int ord, spx_mem_t *mem, char *stack)
+{
+   int i,j;
+   spx_word16_t yi,nyi;
+
+   for (i=0;i<N;i++)
+   {
+      yi = EXTRACT16(SATURATE(ADD32(EXTEND32(x[i]),PSHR32(mem[0],LPC_SHIFT)),32767));
+      nyi = NEG16(yi);
+      for (j=0;j<ord-1;j++)
+      {
+         mem[j] = MAC16_16(mem[j+1],den[j],nyi);
+      }
+      mem[ord-1] = MULT16_16(den[ord-1],nyi);
+      y[i] = yi;
+   }
+}
+#endif
+#else
+void iir_mem16(const spx_word16_t *x, const spx_coef_t *den, spx_word16_t *y, int N, int ord, spx_mem_t *mem, char *stack)
+{
+   iir_mem2(x, den, y, N, ord, mem);
+}
+#endif
+
+
+#ifndef OVERRIDE_FIR_MEM2
+#ifdef PRECISION16
+void fir_mem2(const spx_sig_t *x, const spx_coef_t *num, spx_sig_t *y, int N, int ord, spx_mem_t *mem)
+{
+   int i,j;
+   spx_word16_t xi,yi;
+
+   for (i=0;i<N;i++)
+   {
+      xi= EXTRACT16(PSHR32(SATURATE(x[i],536870911),SIG_SHIFT));
+      yi = EXTRACT16(PSHR32(SATURATE(x[i] + SHL32(mem[0],1),536870911),SIG_SHIFT));
+      for (j=0;j<ord-1;j++)
+      {
+         mem[j] = MAC16_16(mem[j+1], num[j],xi);
+      }
+      mem[ord-1] = MULT16_16(num[ord-1],xi);
+      y[i] = SHL32(EXTEND32(yi),SIG_SHIFT);
+   }
+}
+#else
+void fir_mem2(const spx_sig_t *x, const spx_coef_t *num, spx_sig_t *y, int N, int ord, spx_mem_t *mem)
+{
+   int i,j;
+   spx_word32_t xi,yi;
+
+   for (i=0;i<ord;i++)
+      mem[i] = SHR32(mem[i],1);   
+   for (i=0;i<N;i++)
+   {
+      xi=SATURATE(x[i],805306368);
+      yi = xi + SHL32(mem[0],2);
+      for (j=0;j<ord-1;j++)
+      {
+         mem[j] = MAC16_32_Q15(mem[j+1], num[j],xi);
+      }
+      mem[ord-1] = MULT16_32_Q15(num[ord-1],xi);
+      y[i] = SATURATE(yi,805306368);
+   }
+   for (i=0;i<ord;i++)
+      mem[i] = SHL32(mem[i],1);   
+}
+#endif
+#endif
+
+#ifdef FIXED_POINT
+#ifndef OVERRIDE_FIR_MEM16
+void fir_mem16(const spx_word16_t *x, const spx_coef_t *num, spx_word16_t *y, int N, int ord, spx_mem_t *mem, char *stack)
+{
+   int i,j;
+   spx_word16_t xi,yi;
+
+   for (i=0;i<N;i++)
+   {
+      xi=x[i];
+      yi = EXTRACT16(SATURATE(ADD32(EXTEND32(x[i]),PSHR32(mem[0],LPC_SHIFT)),32767));
+      for (j=0;j<ord-1;j++)
+      {
+         mem[j] = MAC16_16(mem[j+1], num[j],xi);
+      }
+      mem[ord-1] = MULT16_16(num[ord-1],xi);
+      y[i] = yi;
+   }
+}
+#endif
+#else
+void fir_mem16(const spx_word16_t *x, const spx_coef_t *num, spx_word16_t *y, int N, int ord, spx_mem_t *mem, char *stack)
+{
+   fir_mem2(x, num, y, N, ord, mem);
+}
+#endif
+
+
+
+
+
+
+void syn_percep_zero(const spx_sig_t *xx, const spx_coef_t *ak, const spx_coef_t *awk1, const spx_coef_t *awk2, spx_sig_t *y, int N, int ord, char *stack)
+{
+   int i;
+   VARDECL(spx_mem_t *mem);
+   ALLOC(mem, ord, spx_mem_t);
+   for (i=0;i<ord;i++)
+     mem[i]=0;
+   iir_mem2(xx, ak, y, N, ord, mem);
+   for (i=0;i<ord;i++)
+      mem[i]=0;
+   filter_mem2(y, awk1, awk2, y, N, ord, mem);
+}
+
+void residue_percep_zero(const spx_sig_t *xx, const spx_coef_t *ak, const spx_coef_t *awk1, const spx_coef_t *awk2, spx_sig_t *y, int N, int ord, char *stack)
+{
+   int i;
+   VARDECL(spx_mem_t *mem);
+   ALLOC(mem, ord, spx_mem_t);
+   for (i=0;i<ord;i++)
+      mem[i]=0;
+   filter_mem2(xx, ak, awk1, y, N, ord, mem);
+   for (i=0;i<ord;i++)
+     mem[i]=0;
+   fir_mem2(y, awk2, y, N, ord, mem);
+}
+
+#ifndef OVERRIDE_COMPUTE_IMPULSE_RESPONSE
+void compute_impulse_response(const spx_coef_t *ak, const spx_coef_t *awk1, const spx_coef_t *awk2, spx_word16_t *y, int N, int ord, char *stack)
+{
+   int i,j;
+   spx_word16_t y1, ny1i, ny2i;
+   VARDECL(spx_mem_t *mem1);
+   VARDECL(spx_mem_t *mem2);
+   ALLOC(mem1, ord, spx_mem_t);
+   ALLOC(mem2, ord, spx_mem_t);
+   
+   y[0] = LPC_SCALING;
+   for (i=0;i<ord;i++)
+      y[i+1] = awk1[i];
+   i++;
+   for (;i<N;i++)
+      y[i] = VERY_SMALL;
+   for (i=0;i<ord;i++)
+      mem1[i] = mem2[i] = 0;
+   for (i=0;i<N;i++)
+   {
+      y1 = ADD16(y[i], EXTRACT16(PSHR32(mem1[0],LPC_SHIFT)));
+      ny1i = NEG16(y1);
+      y[i] = PSHR32(ADD32(SHL32(EXTEND32(y1),LPC_SHIFT+1),mem2[0]),LPC_SHIFT);
+      ny2i = NEG16(y[i]);
+      for (j=0;j<ord-1;j++)
+      {
+         mem1[j] = MAC16_16(mem1[j+1], awk2[j],ny1i);
+         mem2[j] = MAC16_16(mem2[j+1], ak[j],ny2i);
+      }
+      mem1[ord-1] = MULT16_16(awk2[ord-1],ny1i);
+      mem2[ord-1] = MULT16_16(ak[ord-1],ny2i);
+   }
+}
+#endif
+
+void qmf_decomp(const spx_word16_t *xx, const spx_word16_t *aa, spx_sig_t *y1, spx_sig_t *y2, int N, int M, spx_word16_t *mem, char *stack)
+{
+   int i,j,k,M2;
+   VARDECL(spx_word16_t *a);
+   VARDECL(spx_word16_t *x);
+   spx_word16_t *x2;
+   
+   ALLOC(a, M, spx_word16_t);
+   ALLOC(x, N+M-1, spx_word16_t);
+   x2=x+M-1;
+   M2=M>>1;
+   for (i=0;i<M;i++)
+      a[M-i-1]= aa[i];
+
+   for (i=0;i<M-1;i++)
+      x[i]=mem[M-i-2];
+   for (i=0;i<N;i++)
+      x[i+M-1]=SATURATE(PSHR(xx[i],1),16383);
+   for (i=0,k=0;i<N;i+=2,k++)
+   {
+      y1[k]=0;
+      y2[k]=0;
+      for (j=0;j<M2;j++)
+      {
+         y1[k]=ADD32(y1[k],MULT16_16(a[j],ADD16(x[i+j],x2[i-j])));
+         y2[k]=SUB32(y2[k],MULT16_16(a[j],SUB16(x[i+j],x2[i-j])));
+         j++;
+         y1[k]=ADD32(y1[k],MULT16_16(a[j],ADD16(x[i+j],x2[i-j])));
+         y2[k]=ADD32(y2[k],MULT16_16(a[j],SUB16(x[i+j],x2[i-j])));
+      }
+      y1[k] = SHR32(y1[k],1);
+      y2[k] = SHR32(y2[k],1);
+   }
+   for (i=0;i<M-1;i++)
+     mem[i]=SATURATE(PSHR(xx[N-i-1],1),16383);
+}
+
+
+/* By segher */
+void fir_mem_up(const spx_sig_t *x, const spx_word16_t *a, spx_sig_t *y, int N, int M, spx_word32_t *mem, char *stack)
+   /* assumptions:
+      all odd x[i] are zero -- well, actually they are left out of the array now
+      N and M are multiples of 4 */
+{
+   int i, j;
+   VARDECL(spx_word16_t *xx);
+   
+   ALLOC(xx, M+N-1, spx_word16_t);
+
+   for (i = 0; i < N/2; i++)
+      xx[2*i] = PSHR32(x[N/2-1-i],SIG_SHIFT);
+   for (i = 0; i < M - 1; i += 2)
+      xx[N+i] = mem[i+1];
+
+   for (i = 0; i < N; i += 4) {
+      spx_sig_t y0, y1, y2, y3;
+      spx_word16_t x0;
+
+      y0 = y1 = y2 = y3 = 0;
+      x0 = xx[N-4-i];
+
+      for (j = 0; j < M; j += 4) {
+         spx_word16_t x1;
+         spx_word16_t a0, a1;
+
+         a0 = a[j];
+         a1 = a[j+1];
+         x1 = xx[N-2+j-i];
+
+         y0 = ADD32(y0,SHR(MULT16_16(a0, x1),2));
+         y1 = ADD32(y1,SHR(MULT16_16(a1, x1),2));
+         y2 = ADD32(y2,SHR(MULT16_16(a0, x0),2));
+         y3 = ADD32(y3,SHR(MULT16_16(a1, x0),2));
+
+         a0 = a[j+2];
+         a1 = a[j+3];
+         x0 = xx[N+j-i];
+
+         y0 = ADD32(y0,SHR(MULT16_16(a0, x0),2));
+         y1 = ADD32(y1,SHR(MULT16_16(a1, x0),2));
+         y2 = ADD32(y2,SHR(MULT16_16(a0, x1),2));
+         y3 = ADD32(y3,SHR(MULT16_16(a1, x1),2));
+      }
+      y[i] = y0;
+      y[i+1] = y1;
+      y[i+2] = y2;
+      y[i+3] = y3;
+   }
+
+   for (i = 0; i < M - 1; i += 2)
+      mem[i+1] = xx[i];
+}
+
+#ifdef FIXED_POINT
+#if 0
+spx_word16_t shift_filt[3][7] = {{-33,    1043,   -4551,   19959,   19959,   -4551,    1043},
+                                 {-98,    1133,   -4425,   29179,    8895,   -2328,     444},
+                                 {444,   -2328,    8895,   29179,   -4425,    1133,     -98}};
+#else
+spx_word16_t shift_filt[3][7] = {{-390,    1540,   -4993,   20123,   20123,   -4993,    1540},
+                                {-1064,    2817,   -6694,   31589,    6837,    -990,    -209},
+                                 {-209,    -990,    6837,   31589,   -6694,    2817,   -1064}};
+#endif
+#else
+#if 0
+float shift_filt[3][7] = {{-9.9369e-04, 3.1831e-02, -1.3889e-01, 6.0910e-01, 6.0910e-01, -1.3889e-01, 3.1831e-02},
+                          {-0.0029937, 0.0345613, -0.1350474, 0.8904793, 0.2714479, -0.0710304, 0.0135403},
+                          {0.0135403, -0.0710304, 0.2714479, 0.8904793, -0.1350474, 0.0345613,  -0.0029937}};
+#else
+float shift_filt[3][7] = {{-0.011915, 0.046995, -0.152373, 0.614108, 0.614108, -0.152373, 0.046995},
+                          {-0.0324855, 0.0859768, -0.2042986, 0.9640297, 0.2086420, -0.0302054, -0.0063646},
+                          {-0.0063646, -0.0302054, 0.2086420, 0.9640297, -0.2042986, 0.0859768, -0.0324855}};
+#endif
+#endif
+
+int interp_pitch(
+spx_word16_t *exc,          /*decoded excitation*/
+spx_word16_t *interp,          /*decoded excitation*/
+int pitch,               /*pitch period*/
+int len
+)
+{
+   int i,j,k;
+   spx_word32_t corr[4][7];
+   spx_word32_t maxcorr;
+   int maxi, maxj;
+   for (i=0;i<7;i++)
+   {
+      corr[0][i] = inner_prod(exc, exc-pitch-3+i, len);
+   }
+   for (i=0;i<3;i++)
+   {
+      for (j=0;j<7;j++)
+      {
+         int i1, i2;
+         spx_word32_t tmp=0;
+         i1 = 3-j;
+         if (i1<0)
+            i1 = 0;
+         i2 = 10-j;
+         if (i2>7)
+            i2 = 7;
+         for (k=i1;k<i2;k++)
+            tmp += MULT16_32_Q15(shift_filt[i][k],corr[0][j+k-3]);
+         corr[i+1][j] = tmp;
+      }
+   }
+   maxi=maxj=0;
+   maxcorr = corr[0][0];
+   for (i=0;i<4;i++)
+   {
+      for (j=0;j<7;j++)
+      {
+         if (corr[i][j] > maxcorr)
+         {
+            maxcorr = corr[i][j];
+            maxi=i;
+            maxj=j;
+         }
+      }
+   }
+   for (i=0;i<len;i++)
+   {
+      spx_word32_t tmp = 0;
+      if (maxi>0)
+      {
+         for (k=0;k<7;k++)
+         {
+            tmp += MULT16_16(exc[i-(pitch-maxj+3)+k-3],shift_filt[maxi-1][k]);
+         }
+      } else {
+         tmp = SHL32(exc[i-(pitch-maxj+3)],15);
+      }
+      interp[i] = PSHR32(tmp,15);
+   }
+   return pitch-maxj+3;
+}
+
+void multicomb(
+spx_word16_t *exc,          /*decoded excitation*/
+spx_word16_t *new_exc,      /*enhanced excitation*/
+spx_coef_t *ak,           /*LPC filter coefs*/
+int p,               /*LPC order*/
+int nsf,             /*sub-frame size*/
+int pitch,           /*pitch period*/
+int max_pitch,
+spx_word16_t  comb_gain,    /*gain of comb filter*/
+char *stack
+)
+{
+   int i; 
+   VARDECL(spx_word16_t *iexc);
+   spx_word16_t old_ener, new_ener;
+   int corr_pitch;
+   
+   spx_word16_t iexc0_mag, iexc1_mag, exc_mag;
+   spx_word32_t corr0, corr1;
+   spx_word16_t gain0, gain1;
+   spx_word16_t pgain1, pgain2;
+   spx_word16_t c1, c2;
+   spx_word16_t g1, g2;
+   spx_word16_t ngain;
+   spx_word16_t gg1, gg2;
+
+#if 0 /* Set to 1 to enable full pitch search */
+   int nol_pitch[6];
+   spx_word16_t nol_pitch_coef[6];
+   spx_word16_t ol_pitch_coef;
+   open_loop_nbest_pitch(exc, 20, 120, nsf, 
+                         nol_pitch, nol_pitch_coef, 6, stack);
+   corr_pitch=nol_pitch[0];
+   ol_pitch_coef = nol_pitch_coef[0];
+   /*Try to remove pitch multiples*/
+   for (i=1;i<6;i++)
+   {
+#ifdef FIXED_POINT
+      if ((nol_pitch_coef[i]>MULT16_16_Q15(nol_pitch_coef[0],19661)) && 
+#else
+      if ((nol_pitch_coef[i]>.6*nol_pitch_coef[0]) && 
+#endif
+         (ABS(2*nol_pitch[i]-corr_pitch)<=2 || ABS(3*nol_pitch[i]-corr_pitch)<=3 || 
+         ABS(4*nol_pitch[i]-corr_pitch)<=4 || ABS(5*nol_pitch[i]-corr_pitch)<=5))
+      {
+         corr_pitch = nol_pitch[i];
+      }
+   }
+#else
+   corr_pitch = pitch;
+#endif
+   
+   ALLOC(iexc, 2*nsf, spx_word16_t);
+   
+   interp_pitch(exc, iexc, corr_pitch, 80);
+   if (corr_pitch>max_pitch)
+      interp_pitch(exc, iexc+nsf, 2*corr_pitch, 80);
+   else
+      interp_pitch(exc, iexc+nsf, -corr_pitch, 80);
+
+   /*interp_pitch(exc, iexc+2*nsf, 2*corr_pitch, 80);*/
+   
+   /*printf ("%d %d %f\n", pitch, corr_pitch, max_corr*ener_1);*/
+   iexc0_mag = spx_sqrt(1000+inner_prod(iexc,iexc,nsf));
+   iexc1_mag = spx_sqrt(1000+inner_prod(iexc+nsf,iexc+nsf,nsf));
+   exc_mag = spx_sqrt(1+inner_prod(exc,exc,nsf));
+   corr0  = inner_prod(iexc,exc,nsf);
+   if (corr0<0)
+      corr0=0;
+   corr1 = inner_prod(iexc+nsf,exc,nsf);
+   if (corr1<0)
+      corr1=0;
+#ifdef FIXED_POINT
+   /* Doesn't cost much to limit the ratio and it makes the rest easier */
+   if (SHL32(EXTEND32(iexc0_mag),6) < EXTEND32(exc_mag))
+      iexc0_mag = ADD16(1,PSHR16(exc_mag,6));
+   if (SHL32(EXTEND32(iexc1_mag),6) < EXTEND32(exc_mag))
+      iexc1_mag = ADD16(1,PSHR16(exc_mag,6));
+#endif
+   if (corr0 > MULT16_16(iexc0_mag,exc_mag))
+      pgain1 = QCONST16(1., 14);
+   else
+      pgain1 = PDIV32_16(SHL32(PDIV32(corr0, exc_mag),14),iexc0_mag);
+   if (corr1 > MULT16_16(iexc1_mag,exc_mag))
+      pgain2 = QCONST16(1., 14);
+   else
+      pgain2 = PDIV32_16(SHL32(PDIV32(corr1, exc_mag),14),iexc1_mag);
+   gg1 = PDIV32_16(SHL32(EXTEND32(exc_mag),8), iexc0_mag);
+   gg2 = PDIV32_16(SHL32(EXTEND32(exc_mag),8), iexc1_mag);
+   if (comb_gain>0)
+   {
+#ifdef FIXED_POINT
+      c1 = (MULT16_16_Q15(QCONST16(.4,15),comb_gain)+QCONST16(.07,15));
+      c2 = QCONST16(.5,15)+MULT16_16_Q14(QCONST16(1.72,14),(c1-QCONST16(.07,15)));
+#else
+      c1 = .4*comb_gain+.07;
+      c2 = .5+1.72*(c1-.07);
+#endif
+   } else 
+   {
+      c1=c2=0;
+   }
+#ifdef FIXED_POINT
+   g1 = 32767 - MULT16_16_Q13(MULT16_16_Q15(c2, pgain1),pgain1);
+   g2 = 32767 - MULT16_16_Q13(MULT16_16_Q15(c2, pgain2),pgain2);
+#else
+   g1 = 1-c2*pgain1*pgain1;
+   g2 = 1-c2*pgain2*pgain2;
+#endif
+   if (g1<c1)
+      g1 = c1;
+   if (g2<c1)
+      g2 = c1;
+   g1 = (spx_word16_t)PDIV32_16(SHL32(EXTEND32(c1),14),(spx_word16_t)g1);
+   g2 = (spx_word16_t)PDIV32_16(SHL32(EXTEND32(c1),14),(spx_word16_t)g2);
+   if (corr_pitch>max_pitch)
+   {
+      gain0 = MULT16_16_Q15(QCONST16(.7,15),MULT16_16_Q14(g1,gg1));
+      gain1 = MULT16_16_Q15(QCONST16(.3,15),MULT16_16_Q14(g2,gg2));
+   } else {
+      gain0 = MULT16_16_Q15(QCONST16(.6,15),MULT16_16_Q14(g1,gg1));
+      gain1 = MULT16_16_Q15(QCONST16(.6,15),MULT16_16_Q14(g2,gg2));
+   }
+   for (i=0;i<nsf;i++)
+      new_exc[i] = ADD16(exc[i], EXTRACT16(PSHR32(ADD32(MULT16_16(gain0,iexc[i]), MULT16_16(gain1,iexc[i+nsf])),8)));
+   /* FIXME: compute_rms16 is currently not quite accurate enough (but close) */
+   new_ener = compute_rms16(new_exc, nsf);
+   old_ener = compute_rms16(exc, nsf);
+   
+   if (old_ener < 1)
+      old_ener = 1;
+   if (new_ener < 1)
+      new_ener = 1;
+   if (old_ener > new_ener)
+      old_ener = new_ener;
+   ngain = PDIV32_16(SHL32(EXTEND32(old_ener),14),new_ener);
+   
+   for (i=0;i<nsf;i++)
+      new_exc[i] = MULT16_16_Q14(ngain, new_exc[i]);
+}
+

Added: freeswitch/trunk/libs/speex/libspeex/filters.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/filters.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,96 @@
+/* Copyright (C) 2002 Jean-Marc Valin */
+/**
+   @file filters.h
+   @brief Various analysis/synthesis filters
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef FILTERS_H
+#define FILTERS_H
+
+#include "misc.h"
+
+spx_word16_t compute_rms(const spx_sig_t *x, int len);
+spx_word16_t compute_rms16(const spx_word16_t *x, int len);
+void signal_mul(const spx_sig_t *x, spx_sig_t *y, spx_word32_t scale, int len);
+void signal_div(const spx_word16_t *x, spx_word16_t *y, spx_word32_t scale, int len);
+
+#ifdef FIXED_POINT
+
+int normalize16(const spx_sig_t *x, spx_word16_t *y, spx_sig_t max_scale, int len);
+
+#endif
+
+
+#define HIGHPASS_NARROWBAND 0
+#define HIGHPASS_WIDEBAND 2
+#define HIGHPASS_INPUT 0
+#define HIGHPASS_OUTPUT 1
+#define HIGHPASS_IRS 4
+
+void highpass(const spx_word16_t *x, spx_word16_t *y, int len, int filtID, spx_mem_t *mem);
+
+
+void qmf_decomp(const spx_word16_t *xx, const spx_word16_t *aa, spx_sig_t *, spx_sig_t *y2, int N, int M, spx_word16_t *mem, char *stack);
+void fir_mem_up(const spx_sig_t *x, const spx_word16_t *a, spx_sig_t *y, int N, int M, spx_word32_t *mem, char *stack);
+
+
+void filter_mem2(const spx_sig_t *x, const spx_coef_t *num, const spx_coef_t *den, spx_sig_t *y, int N, int ord, spx_mem_t *mem);
+void fir_mem2(const spx_sig_t *x, const spx_coef_t *num, spx_sig_t *y, int N, int ord, spx_mem_t *mem);
+void iir_mem2(const spx_sig_t *x, const spx_coef_t *den, spx_sig_t *y, int N, int ord, spx_mem_t *mem);
+
+void filter_mem16(const spx_word16_t *x, const spx_coef_t *num, const spx_coef_t *den, spx_word16_t *y, int N, int ord, spx_mem_t *mem, char *stack);
+void iir_mem16(const spx_word16_t *x, const spx_coef_t *den, spx_word16_t *y, int N, int ord, spx_mem_t *mem, char *stack);
+void fir_mem16(const spx_word16_t *x, const spx_coef_t *num, spx_word16_t *y, int N, int ord, spx_mem_t *mem, char *stack);
+
+/* Apply bandwidth expansion on LPC coef */
+void bw_lpc(spx_word16_t , const spx_coef_t *lpc_in, spx_coef_t *lpc_out, int order);
+
+
+
+void syn_percep_zero(const spx_sig_t *x, const spx_coef_t *ak, const spx_coef_t *awk1, const spx_coef_t *awk2, spx_sig_t *y, int N, int ord, char *stack);
+
+void residue_percep_zero(const spx_sig_t *xx, const spx_coef_t *ak, const spx_coef_t *awk1, const spx_coef_t *awk2, spx_sig_t *y, int N, int ord, char *stack);
+
+void compute_impulse_response(const spx_coef_t *ak, const spx_coef_t *awk1, const spx_coef_t *awk2, spx_word16_t *y, int N, int ord, char *stack);
+
+void multicomb(
+spx_word16_t *exc,          /*decoded excitation*/
+spx_word16_t *new_exc,      /*enhanced excitation*/
+spx_coef_t *ak,           /*LPC filter coefs*/
+int p,               /*LPC order*/
+int nsf,             /*sub-frame size*/
+int pitch,           /*pitch period*/
+int max_pitch,   /*pitch gain (3-tap)*/
+spx_word16_t  comb_gain,    /*gain of comb filter*/
+char *stack
+);
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/filters_arm4.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/filters_arm4.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,389 @@
+/* Copyright (C) 2004 Jean-Marc Valin */
+/**
+   @file filters_arm4.h
+   @brief Various analysis/synthesis filters (ARM4 version)
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#define OVERRIDE_NORMALIZE16
+int normalize16(const spx_sig_t *x, spx_word16_t *y, int max_scale, int len)
+{
+   int i;
+   spx_sig_t max_val=1;
+   int sig_shift;
+   int dead1, dead2, dead3, dead4, dead5, dead6;
+
+   __asm__ __volatile__ (
+         "\tmov %1, #1 \n"
+         "\tmov %3, #0 \n"
+
+         ".normalize16loop1%=: \n"
+
+         "\tldr %4, [%0], #4 \n"
+         "\tcmps %4, %1 \n"
+         "\tmovgt %1, %4 \n"
+         "\tcmps %4, %3 \n"
+         "\tmovlt %3, %4 \n"
+
+         "\tsubs %2, %2, #1 \n"
+         "\tbne .normalize16loop1%=\n"
+
+         "\trsb %3, %3, #0 \n"
+         "\tcmp %1, %3 \n"
+         "\tmovlt %1, %3 \n"
+   : "=r" (dead1), "=r" (max_val), "=r" (dead3), "=r" (dead4),
+   "=r" (dead5), "=r" (dead6)
+   : "0" (x), "2" (len)
+   : "cc");
+
+   sig_shift=0;
+   while (max_val>max_scale)
+   {
+      sig_shift++;
+      max_val >>= 1;
+   }
+   
+   __asm__ __volatile__ (
+         ".normalize16loop%=: \n"
+
+         "\tldr %4, [%0], #4 \n"
+         "\tldr %5, [%0], #4 \n"
+         "\tmov %4, %4, asr %3 \n"
+         "\tstrh %4, [%1], #2 \n"
+         "\tldr %4, [%0], #4 \n"
+         "\tmov %5, %5, asr %3 \n"
+         "\tstrh %5, [%1], #2 \n"
+         "\tldr %5, [%0], #4 \n"
+         "\tmov %4, %4, asr %3 \n"
+         "\tstrh %4, [%1], #2 \n"
+         "\tsubs %2, %2, #1 \n"
+         "\tmov %5, %5, asr %3 \n"
+         "\tstrh %5, [%1], #2 \n"
+
+         "\tbge .normalize16loop%=\n"
+   : "=r" (dead1), "=r" (dead2), "=r" (dead3), "=r" (dead4),
+   "=r" (dead5), "=r" (dead6)
+   : "0" (x), "1" (y), "2" (len>>2), "3" (sig_shift)
+   : "cc", "memory");
+   return sig_shift;
+}
+
+#define OVERRIDE_FILTER_MEM2
+void filter_mem2(const spx_sig_t *x, const spx_coef_t *num, const spx_coef_t *den, spx_sig_t *y, int N, int ord, spx_mem_t *mem)
+{
+   int i,j;
+   spx_sig_t xi,yi,nyi;
+
+   for (i=0;i<ord;i++)
+      mem[i] = SHR32(mem[i],1);   
+   for (i=0;i<N;i++)
+   {
+      int deadm, deadn, deadd, deadidx, x1, y1, dead1, dead2, dead3, dead4, dead5, dead6;
+      xi=SATURATE(x[i],805306368);
+      yi = SATURATE(ADD32(xi, SHL(mem[0],2)),805306368);
+      nyi = -yi;
+      y[i] = yi;
+      __asm__ __volatile__ (
+            "\tldrsh %6, [%1], #2\n"
+            "\tsmull %8, %9, %4, %6\n"
+#ifdef SHORTCUTS
+            "\tldrsh %6, [%2], #2\n"
+            "\tldr %10, [%0, #4]\n"
+            "\tmov %8, %8, lsr #15\n"
+            "\tsmull %7, %11, %5, %6\n"
+            "\tldrsh %6, [%1], #2\n"
+            "\tadd %8, %8, %9, lsl #17\n"
+            "\tadd %10, %10, %8\n"
+            "\tsmull %8, %9, %4, %6\n"
+            "\tadd %10, %10, %7, lsr #15\n"
+            "\tadd %10, %10, %11, lsl #17\n"
+            "\tstr %10, [%0], #4 \n"
+
+            "\tldrsh %6, [%2], #2\n"
+            "\tldr %10, [%0, #4]\n"
+            "\tmov %8, %8, lsr #15\n"
+            "\tsmull %7, %11, %5, %6\n"
+            "\tldrsh %6, [%1], #2\n"
+            "\tadd %8, %8, %9, lsl #17\n"
+            "\tadd %10, %10, %8\n"
+            "\tsmull %8, %9, %4, %6\n"
+            "\tadd %10, %10, %7, lsr #15\n"
+            "\tadd %10, %10, %11, lsl #17\n"
+            "\tstr %10, [%0], #4 \n"
+
+            "\tldrsh %6, [%2], #2\n"
+            "\tldr %10, [%0, #4]\n"
+            "\tmov %8, %8, lsr #15\n"
+            "\tsmull %7, %11, %5, %6\n"
+            "\tldrsh %6, [%1], #2\n"
+            "\tadd %8, %8, %9, lsl #17\n"
+            "\tadd %10, %10, %8\n"
+            "\tsmull %8, %9, %4, %6\n"
+            "\tadd %10, %10, %7, lsr #15\n"
+            "\tadd %10, %10, %11, lsl #17\n"
+            "\tstr %10, [%0], #4 \n"
+
+            "\tldrsh %6, [%2], #2\n"
+            "\tldr %10, [%0, #4]\n"
+            "\tmov %8, %8, lsr #15\n"
+            "\tsmull %7, %11, %5, %6\n"
+            "\tldrsh %6, [%1], #2\n"
+            "\tadd %8, %8, %9, lsl #17\n"
+            "\tadd %10, %10, %8\n"
+            "\tsmull %8, %9, %4, %6\n"
+            "\tadd %10, %10, %7, lsr #15\n"
+            "\tadd %10, %10, %11, lsl #17\n"
+            "\tstr %10, [%0], #4 \n"
+
+            "\tldrsh %6, [%2], #2\n"
+            "\tldr %10, [%0, #4]\n"
+            "\tmov %8, %8, lsr #15\n"
+            "\tsmull %7, %11, %5, %6\n"
+            "\tldrsh %6, [%1], #2\n"
+            "\tadd %8, %8, %9, lsl #17\n"
+            "\tadd %10, %10, %8\n"
+            "\tsmull %8, %9, %4, %6\n"
+            "\tadd %10, %10, %7, lsr #15\n"
+            "\tadd %10, %10, %11, lsl #17\n"
+            "\tstr %10, [%0], #4 \n"
+
+            "\tldrsh %6, [%2], #2\n"
+            "\tldr %10, [%0, #4]\n"
+            "\tmov %8, %8, lsr #15\n"
+            "\tsmull %7, %11, %5, %6\n"
+            "\tldrsh %6, [%1], #2\n"
+            "\tadd %8, %8, %9, lsl #17\n"
+            "\tadd %10, %10, %8\n"
+            "\tsmull %8, %9, %4, %6\n"
+            "\tadd %10, %10, %7, lsr #15\n"
+            "\tadd %10, %10, %11, lsl #17\n"
+            "\tstr %10, [%0], #4 \n"
+
+            "\tldrsh %6, [%2], #2\n"
+            "\tldr %10, [%0, #4]\n"
+            "\tmov %8, %8, lsr #15\n"
+            "\tsmull %7, %11, %5, %6\n"
+            "\tldrsh %6, [%1], #2\n"
+            "\tadd %8, %8, %9, lsl #17\n"
+            "\tadd %10, %10, %8\n"
+            "\tsmull %8, %9, %4, %6\n"
+            "\tadd %10, %10, %7, lsr #15\n"
+            "\tadd %10, %10, %11, lsl #17\n"
+            "\tstr %10, [%0], #4 \n"
+
+            "\tldrsh %6, [%2], #2\n"
+            "\tldr %10, [%0, #4]\n"
+            "\tmov %8, %8, lsr #15\n"
+            "\tsmull %7, %11, %5, %6\n"
+            "\tldrsh %6, [%1], #2\n"
+            "\tadd %8, %8, %9, lsl #17\n"
+            "\tadd %10, %10, %8\n"
+            "\tsmull %8, %9, %4, %6\n"
+            "\tadd %10, %10, %7, lsr #15\n"
+            "\tadd %10, %10, %11, lsl #17\n"
+            "\tstr %10, [%0], #4 \n"
+
+            "\tldrsh %6, [%2], #2\n"
+            "\tldr %10, [%0, #4]\n"
+            "\tmov %8, %8, lsr #15\n"
+            "\tsmull %7, %11, %5, %6\n"
+            "\tldrsh %6, [%1], #2\n"
+            "\tadd %8, %8, %9, lsl #17\n"
+            "\tadd %10, %10, %8\n"
+            "\tsmull %8, %9, %4, %6\n"
+            "\tadd %10, %10, %7, lsr #15\n"
+            "\tadd %10, %10, %11, lsl #17\n"
+            "\tstr %10, [%0], #4 \n"
+
+
+#else
+            ".filterloop%=: \n"
+            "\tldrsh %6, [%2], #2\n"
+            "\tldr %10, [%0, #4]\n"
+            "\tmov %8, %8, lsr #15\n"
+            "\tsmull %7, %11, %5, %6\n"
+            "\tadd %8, %8, %9, lsl #17\n"
+            "\tldrsh %6, [%1], #2\n"
+            "\tadd %10, %10, %8\n"
+            "\tsmull %8, %9, %4, %6\n"
+            "\tadd %10, %10, %7, lsr #15\n"
+            "\tsubs %3, %3, #1\n"
+            "\tadd %10, %10, %11, lsl #17\n"
+            "\tstr %10, [%0], #4 \n"
+            "\t bne .filterloop%=\n"
+#endif
+            "\tmov %8, %8, lsr #15\n"
+            "\tadd %10, %8, %9, lsl #17\n"
+            "\tldrsh %6, [%2], #2\n"
+            "\tsmull %8, %9, %5, %6\n"
+            "\tadd %10, %10, %8, lsr #15\n"
+            "\tadd %10, %10, %9, lsl #17\n"
+            "\tstr %10, [%0], #4 \n"
+
+         : "=r" (deadm), "=r" (deadn), "=r" (deadd), "=r" (deadidx),
+      "=r" (xi), "=r" (nyi), "=r" (dead1), "=r" (dead2),
+      "=r" (dead3), "=r" (dead4), "=r" (dead5), "=r" (dead6)
+         : "0" (mem), "1" (num), "2" (den), "3" (ord-1), "4" (xi), "5" (nyi)
+         : "cc", "memory");
+   
+   }
+   for (i=0;i<ord;i++)
+      mem[i] = SHL32(mem[i],1);   
+}
+
+#define OVERRIDE_IIR_MEM2
+void iir_mem2(const spx_sig_t *x, const spx_coef_t *den, spx_sig_t *y, int N, int ord, spx_mem_t *mem)
+{
+   int i,j;
+   spx_sig_t xi,yi,nyi;
+
+   for (i=0;i<ord;i++)
+      mem[i] = SHR32(mem[i],1);   
+
+   for (i=0;i<N;i++)
+   {
+      int deadm, deadd, deadidx, dead1, dead2, dead3, dead4, dead5, dead6;
+      xi=SATURATE(x[i],805306368);
+      yi = SATURATE(ADD32(xi, SHL(mem[0],2)),805306368);
+      nyi = -yi;
+      y[i] = yi;
+      __asm__ __volatile__ (
+            "\tldrsh %4, [%1], #2\n"
+            "\tsmull %5, %6, %3, %4\n"
+
+#ifdef SHORTCUTS
+                        
+            "\tldrsh %4, [%1], #2\n"
+            "\tmov %5, %5, lsr #15\n"
+            "\tldr %7, [%0, #4]\n"
+            "\tadd %8, %5, %6, lsl #17\n"
+            "\tsmull %5, %6, %3, %4\n"
+            "\tadd %7, %7, %8\n"
+            "\tstr %7, [%0], #4 \n"
+
+                 
+            "\tldrsh %4, [%1], #2\n"
+            "\tmov %5, %5, lsr #15\n"
+            "\tldr %9, [%0, #4]\n"
+            "\tadd %8, %5, %6, lsl #17\n"
+            "\tsmull %5, %6, %3, %4\n"
+            "\tadd %9, %9, %8\n"
+            "\tstr %9, [%0], #4 \n"
+
+            "\tldrsh %4, [%1], #2\n"
+            "\tmov %5, %5, lsr #15\n"
+            "\tldr %7, [%0, #4]\n"
+            "\tadd %8, %5, %6, lsl #17\n"
+            "\tsmull %5, %6, %3, %4\n"
+            "\tadd %7, %7, %8\n"
+            "\tstr %7, [%0], #4 \n"
+
+            
+            "\tldrsh %4, [%1], #2\n"
+            "\tmov %5, %5, lsr #15\n"
+            "\tldr %9, [%0, #4]\n"
+            "\tadd %8, %5, %6, lsl #17\n"
+            "\tsmull %5, %6, %3, %4\n"
+            "\tadd %9, %9, %8\n"
+            "\tstr %9, [%0], #4 \n"
+
+            "\tldrsh %4, [%1], #2\n"
+            "\tmov %5, %5, lsr #15\n"
+            "\tldr %7, [%0, #4]\n"
+            "\tadd %8, %5, %6, lsl #17\n"
+            "\tsmull %5, %6, %3, %4\n"
+            "\tadd %7, %7, %8\n"
+            "\tstr %7, [%0], #4 \n"
+
+            
+            "\tldrsh %4, [%1], #2\n"
+            "\tmov %5, %5, lsr #15\n"
+            "\tldr %9, [%0, #4]\n"
+            "\tadd %8, %5, %6, lsl #17\n"
+            "\tsmull %5, %6, %3, %4\n"
+            "\tadd %9, %9, %8\n"
+            "\tstr %9, [%0], #4 \n"
+
+            "\tldrsh %4, [%1], #2\n"
+            "\tmov %5, %5, lsr #15\n"
+            "\tldr %7, [%0, #4]\n"
+            "\tadd %8, %5, %6, lsl #17\n"
+            "\tsmull %5, %6, %3, %4\n"
+            "\tadd %7, %7, %8\n"
+            "\tstr %7, [%0], #4 \n"
+
+            
+            "\tldrsh %4, [%1], #2\n"
+            "\tmov %5, %5, lsr #15\n"
+            "\tldr %9, [%0, #4]\n"
+            "\tadd %8, %5, %6, lsl #17\n"
+            "\tsmull %5, %6, %3, %4\n"
+            "\tadd %9, %9, %8\n"
+            "\tstr %9, [%0], #4 \n"
+
+            "\tldrsh %4, [%1], #2\n"
+            "\tmov %5, %5, lsr #15\n"
+            "\tldr %7, [%0, #4]\n"
+            "\tadd %8, %5, %6, lsl #17\n"
+            "\tsmull %5, %6, %3, %4\n"
+            "\tadd %7, %7, %8\n"
+            "\tstr %7, [%0], #4 \n"
+
+            
+            
+#else
+            ".iirloop%=: \n"
+            "\tldr %7, [%0, #4]\n"
+
+            "\tldrsh %4, [%1], #2\n"
+            "\tmov %5, %5, lsr #15\n"
+            "\tadd %8, %5, %6, lsl #17\n"
+            "\tsmull %5, %6, %3, %4\n"
+            "\tadd %7, %7, %8\n"
+            "\tstr %7, [%0], #4 \n"
+            "\tsubs %2, %2, #1\n"
+            "\t bne .iirloop%=\n"
+            
+#endif
+            "\tmov %5, %5, lsr #15\n"
+            "\tadd %7, %5, %6, lsl #17\n"
+            "\tstr %7, [%0], #4 \n"
+
+         : "=r" (deadm), "=r" (deadd), "=r" (deadidx), "=r" (nyi),
+      "=r" (dead1), "=r" (dead2), "=r" (dead3), "=r" (dead4),
+      "=r" (dead5), "=r" (dead6)
+         : "0" (mem), "1" (den), "2" (ord-1), "3" (nyi)
+         : "cc", "memory");
+   
+   }
+   for (i=0;i<ord;i++)
+      mem[i] = SHL32(mem[i],1);   
+
+}

Added: freeswitch/trunk/libs/speex/libspeex/filters_bfin.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/filters_bfin.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,788 @@
+/* Copyright (C) 2005 Analog Devices */
+/**
+   @file filters_bfin.h
+   @brief Various analysis/synthesis filters (Blackfin version)
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#define OVERRIDE_NORMALIZE16
+int normalize16(const spx_sig_t *x, spx_word16_t *y, spx_sig_t max_scale, int len)
+{
+   spx_sig_t max_val=1;
+   int sig_shift;
+   __asm__ 
+   (
+   "%0 = 0;\n\t"
+   "I0 = %1;\n\t"
+   "L0 = 0;\n\t"
+   "R1 = [I0++];\n\t"
+   "LOOP norm_max%= LC0 = %2;\n\t"
+   "LOOP_BEGIN norm_max%=;\n\t"
+      "R2 = ABS R1 || R1 = [I0++];\n\t"
+      "%0 = MAX(%0, R2);\n\t"
+   "LOOP_END norm_max%=;\n\t"
+   : "=&d" (max_val)
+   : "a" (x), "a" (len)
+   : "R1", "R2"
+   );
+
+   sig_shift=0;
+   while (max_val>max_scale)
+   {
+      sig_shift++;
+      max_val >>= 1;
+   }
+
+   __asm__ __volatile__ 
+   (
+   "I0 = %0;\n\t"
+   "L0 = 0;\n\t"
+   "P1 = %1;\n\t"
+   "R0 = [I0++];\n\t"
+   "LOOP norm_shift%= LC0 = %3;\n\t"
+   "LOOP_BEGIN norm_shift%=;\n\t"
+      "R1 = ASHIFT R0 by %2.L || R0 = [I0++];\n\t"
+      "W[P1++] = R1;\n\t"
+   "LOOP_END norm_shift%=;\n\t"
+   "R1 = ASHIFT R0 by %2.L;\n\t"
+   "W[P1++] = R1;\n\t"
+   : : "a" (x), "a" (y), "d" (-sig_shift), "a" (len-1)
+   : "I0", "L0", "P1", "R0", "R1", "memory"
+   );
+   return sig_shift;
+}
+
+#define OVERRIDE_FILTER_MEM2
+void filter_mem2(const spx_sig_t *_x, const spx_coef_t *num, const spx_coef_t *den, spx_sig_t *_y, int N, int ord, spx_mem_t *mem)
+{
+   spx_word32_t xy2[N+1];
+   spx_word32_t *xy = xy2+1;
+   spx_word32_t numden_a[2*ord+2];
+   spx_word16_t *numden = (spx_word16_t*) numden_a;
+   int i;
+   for (i=0;i<ord;i++)
+   {
+      numden[2*i] = num[i];
+      numden[2*i+1] = den[i];
+   }
+   __asm__ __volatile__
+   (
+   /* Register setup */
+   "R0 = %5;\n\t"      /*ord */
+   
+   "P0 = %3;\n\t"
+   "I0 = P0;\n\t"
+   "B0 = P0;\n\t" /* numden */
+   "L0 = 0;\n\t"
+      
+   "P2 = %0;\n\t" /* Fused xy */
+   "I2 = P2;\n\t"
+   "L2 = 0;\n\t"
+   
+   "P4 = %6;\n\t" /* mem */
+   "P0 = %1;\n\t" /* _x */
+   "P1 = %2;\n\t" /* _y */
+   
+   /* First sample */
+   "R1 = [P4++];\n\t"
+   "R1 <<= 1;\n\t" /* shift mem */
+   "R2 = [P0++];\n\t" /* load x[0] */
+   "R1 = R1 + R2;\n\t"
+   "[P1++] = R1;\n\t" /* store y[0] */
+   "R1 <<= 2;\n\t"
+   "R2 <<= 2;\n\t"
+   "R2 = PACK(R1.H, R2.H);\n\t" /* pack x16 and y16 */
+   "[P2] = R2;\n\t"
+               
+   /* Samples 1 to ord-1 (using memory) */
+   "R0 += -1;\n\t"
+   "R3 = 0;\n\t"
+   "LC0 = R0;\n\t"
+   "LOOP filter_start%= LC0;\n\t"
+   "LOOP_BEGIN filter_start%=;\n\t"
+      "R3 += 1;\n\t"
+      "LC1 = R3;\n\t"
+      
+      "R1 = [P4++];\n\t"
+      "A1 = R1;\n\t"
+      "A0 = 0;\n\t"
+      "I0 = B0;\n\t"
+      "I2 = P2;\n\t"
+      "P2 += 4;\n\t"
+      "R4 = [I0++] || R5 = [I2--];\n\t"
+      "LOOP filter_start_inner%= LC1;\n\t"
+      "LOOP_BEGIN filter_start_inner%=;\n\t"
+         "A1 -= R4.H*R5.H, A0 += R4.L*R5.L (IS) || R4 = [I0++] || R5 = [I2--];\n\t"
+      "LOOP_END filter_start_inner%=;\n\t"
+      "A0 += A1;\n\t"
+      "R4 = A0;\n\t"
+      "R4 <<= 1;\n\t" /* shift mem */
+      "R2 = [P0++];\n\t" /* load x */
+      "R4 = R4 + R2;\n\t"
+      "[P1++] = R4;\n\t" /* store y */
+      "R4 <<= 2;\n\t"
+      "R2 <<= 2;\n\t"
+      "R2 = PACK(R4.H, R2.H);\n\t" /* pack x16 and y16 */
+      "[P2] = R2;\n\t"
+
+   "LOOP_END filter_start%=;\n\t"
+
+   /* Samples ord to N*/   
+   "R0 = %5;\n\t"
+   "R0 <<= 1;\n\t"
+   "I0 = B0;\n\t" /* numden */
+   "R0 <<= 1;\n\t"   
+   "L0 = R0;\n\t"
+   
+   "R0 = %5;\n\t" /* org */
+   "R2 = %4;\n\t" /* N */
+   "R2 = R2 - R0;\n\t"
+   "R4 = [I0++];\n\t" /* numden */
+   "LC0 = R2;\n\t"
+   "P3 = R0;\n\t"
+   "R0 <<= 2;\n\t"
+   "R0 += 8;\n\t"
+   "I2 = P2;\n\t"
+   "M0 = R0;\n\t"
+   "A1 = A0 = 0;\n\t"
+   "R5 = [I2--];\n\t" /* load xy */
+   "LOOP filter_mid%= LC0;\n\t"
+   "LOOP_BEGIN filter_mid%=;\n\t"
+      "LOOP filter_mid_inner%= LC1=P3;\n\t"
+      "LOOP_BEGIN filter_mid_inner%=;\n\t"
+         "A1 -= R4.H*R5.H, A0 += R4.L*R5.L (IS) || R4 = [I0++] || R5 = [I2--];\n\t"
+      "LOOP_END filter_mid_inner%=;\n\t"
+      "R0 = (A0 += A1) || I2 += M0;\n\t"
+      "R0 = R0 << 1 || R5 = [P0++];\n\t" /* load x */
+      "R0 = R0 + R5;\n\t"
+      "R0 = R0 << 2 || [P1++] = R0;\n\t" /* shift y | store y */
+      "R5 = R5 << 2;\n\t"
+      "R5 = PACK(R0.H, R5.H);\n\t"
+      "A1 = A0 = 0 || [I2--] = R5\n\t"
+      "LOOP_END filter_mid%=;\n\t"
+   "I2 += 4;\n\t"
+   "P2 = I2;\n\t"
+   /* Update memory */
+   "P4 = %6;\n\t"
+   "R0 = %5;\n\t"
+   "LC0 = R0;\n\t"
+   "P0 = B0;\n\t"
+   "A1 = A0 = 0;\n\t"
+   "LOOP mem_update%= LC0;\n\t"
+   "LOOP_BEGIN mem_update%=;\n\t"
+      "I2 = P2;\n\t"
+      "I0 = P0;\n\t"
+      "P0 += 4;\n\t"
+      "R0 = LC0;\n\t"
+      "LC1 = R0;\n\t"
+      "R5 = [I2--] || R4 = [I0++];\n\t"
+      "LOOP mem_accum%= LC1;\n\t"
+      "LOOP_BEGIN mem_accum%=;\n\t"
+         "A1 -= R4.H*R5.H, A0 += R4.L*R5.L (IS) || R4 = [I0++] || R5 = [I2--];\n\t"
+      "LOOP_END mem_accum%=;\n\t"
+      "R0 = (A0 += A1);\n\t"
+      "A1 = A0 = 0 || [P4++] = R0;\n\t"
+   "LOOP_END mem_update%=;\n\t"
+   "L0 = 0;\n\t"
+   : : "m" (xy), "m" (_x), "m" (_y), "m" (numden), "m" (N), "m" (ord), "m" (mem)
+   : "A0", "A1", "R0", "R1", "R2", "R3", "R4", "R5", "P0", "P1", "P2", "P3", "P4", "B0", "I0", "I2", "L0", "L2", "M0", "memory"
+   );
+
+}
+
+
+#define OVERRIDE_FILTER_MEM16
+void filter_mem16(const spx_word16_t *_x, const spx_coef_t *num, const spx_coef_t *den, spx_word16_t *_y, int N, int ord, spx_mem_t *mem, char *stack)
+{
+   VARDECL(spx_word32_t *xy2);
+   VARDECL(spx_word32_t *numden_a);
+   spx_word32_t *xy;
+   spx_word16_t *numden;
+   int i;
+
+   ALLOC(xy2, (N+1), spx_word32_t);
+   ALLOC(numden_a, (2*ord+2), spx_word32_t);
+   xy = xy2+1;  
+   numden = (spx_word16_t*) numden_a;
+
+   for (i=0;i<ord;i++)
+   {
+      numden[2*i] = num[i];
+      numden[2*i+1] = den[i];
+   }
+   __asm__ __volatile__
+   (
+   /* Register setup */
+   "R0 = %5;\n\t"      /*ord */
+   
+   "P0 = %3;\n\t"
+   "I0 = P0;\n\t"
+   "B0 = P0;\n\t" /* numden */
+   "L0 = 0;\n\t"
+      
+   "P2 = %0;\n\t" /* Fused xy */
+   "I2 = P2;\n\t"
+   "L2 = 0;\n\t"
+   
+   "P4 = %6;\n\t" /* mem */
+   "P0 = %1;\n\t" /* _x */
+   "P1 = %2;\n\t" /* _y */
+   
+   /* First sample */
+   "R1 = [P4++];\n\t"
+   "R1 <<= 3;\n\t" /* shift mem */
+   "R1.L = R1 (RND);\n\t"
+   "R2 = W[P0++];\n\t" /* load x[0] */
+   "R1.L = R1.L + R2.L;\n\t"
+   "W[P1++] = R1;\n\t" /* store y[0] */
+   "R2 = PACK(R1.L, R2.L);\n\t" /* pack x16 and y16 */
+   "[P2] = R2;\n\t"
+               
+   /* Samples 1 to ord-1 (using memory) */
+   "R0 += -1;\n\t"
+   "R3 = 0;\n\t"
+   "LC0 = R0;\n\t"
+   "LOOP filter_start%= LC0;\n\t"
+   "LOOP_BEGIN filter_start%=;\n\t"
+      "R3 += 1;\n\t"
+      "LC1 = R3;\n\t"
+      
+      "R1 = [P4++];\n\t"
+      "A1 = R1;\n\t"
+      "A0 = 0;\n\t"
+      "I0 = B0;\n\t"
+      "I2 = P2;\n\t"
+      "P2 += 4;\n\t"
+      "R4 = [I0++] || R5 = [I2--];\n\t"
+      "LOOP filter_start_inner%= LC1;\n\t"
+      "LOOP_BEGIN filter_start_inner%=;\n\t"
+         "A1 -= R4.H*R5.H, A0 += R4.L*R5.L (IS) || R4 = [I0++] || R5 = [I2--];\n\t"
+      "LOOP_END filter_start_inner%=;\n\t"
+      "A0 += A1;\n\t"
+      "R4 = A0;\n\t"
+      "R4 <<= 3;\n\t" /* shift mem */
+      "R4.L = R4 (RND);\n\t"
+      "R2 = W[P0++];\n\t" /* load x */
+      "R4.L = R4.L + R2.L;\n\t"
+      "W[P1++] = R4;\n\t" /* store y */
+      //"R4 <<= 2;\n\t"
+      //"R2 <<= 2;\n\t"
+      "R2 = PACK(R4.L, R2.L);\n\t" /* pack x16 and y16 */
+      "[P2] = R2;\n\t"
+
+   "LOOP_END filter_start%=;\n\t"
+
+   /* Samples ord to N*/   
+   "R0 = %5;\n\t"
+   "R0 <<= 1;\n\t"
+   "I0 = B0;\n\t" /* numden */
+   "R0 <<= 1;\n\t"   
+   "L0 = R0;\n\t"
+   
+   "R0 = %5;\n\t" /* org */
+   "R2 = %4;\n\t" /* N */
+   "R2 = R2 - R0;\n\t"
+   "R4 = [I0++];\n\t" /* numden */
+   "LC0 = R2;\n\t"
+   "P3 = R0;\n\t"
+   "R0 <<= 2;\n\t"
+   "R0 += 8;\n\t"
+   "I2 = P2;\n\t"
+   "M0 = R0;\n\t"
+   "A1 = A0 = 0;\n\t"
+   "R5 = [I2--];\n\t" /* load xy */
+   "LOOP filter_mid%= LC0;\n\t"
+   "LOOP_BEGIN filter_mid%=;\n\t"
+      "LOOP filter_mid_inner%= LC1=P3;\n\t"
+      "LOOP_BEGIN filter_mid_inner%=;\n\t"
+         "A1 -= R4.H*R5.H, A0 += R4.L*R5.L (IS) || R4 = [I0++] || R5 = [I2--];\n\t"
+      "LOOP_END filter_mid_inner%=;\n\t"
+      "R0 = (A0 += A1) || I2 += M0;\n\t"
+      "R0 = R0 << 3 || R5 = W[P0++];\n\t" /* load x */
+      "R0.L = R0 (RND);\n\t"
+      "R0.L = R0.L + R5.L;\n\t"
+      "R5 = PACK(R0.L, R5.L) || W[P1++] = R0;\n\t" /* shift y | store y */
+      "A1 = A0 = 0 || [I2--] = R5\n\t"
+      "LOOP_END filter_mid%=;\n\t"
+   "I2 += 4;\n\t"
+   "P2 = I2;\n\t"
+   /* Update memory */
+   "P4 = %6;\n\t"
+   "R0 = %5;\n\t"
+   "LC0 = R0;\n\t"
+   "P0 = B0;\n\t"
+   "A1 = A0 = 0;\n\t"
+   "LOOP mem_update%= LC0;\n\t"
+   "LOOP_BEGIN mem_update%=;\n\t"
+      "I2 = P2;\n\t"
+      "I0 = P0;\n\t"
+      "P0 += 4;\n\t"
+      "R0 = LC0;\n\t"
+      "LC1 = R0;\n\t"
+      "R5 = [I2--] || R4 = [I0++];\n\t"
+      "LOOP mem_accum%= LC1;\n\t"
+      "LOOP_BEGIN mem_accum%=;\n\t"
+         "A1 -= R4.H*R5.H, A0 += R4.L*R5.L (IS) || R4 = [I0++] || R5 = [I2--];\n\t"
+      "LOOP_END mem_accum%=;\n\t"
+      "R0 = (A0 += A1);\n\t"
+      "A1 = A0 = 0 || [P4++] = R0;\n\t"
+   "LOOP_END mem_update%=;\n\t"
+   "L0 = 0;\n\t"
+   : : "m" (xy), "m" (_x), "m" (_y), "m" (numden), "m" (N), "m" (ord), "m" (mem)
+   : "A0", "A1", "R0", "R1", "R2", "R3", "R4", "R5", "P0", "P1", "P2", "P3", "P4", "B0", "I0", "I2", "L0", "L2", "M0", "memory"
+   );
+
+}
+
+
+
+
+#define OVERRIDE_IIR_MEM2
+void iir_mem2(const spx_sig_t *_x, const spx_coef_t *den, spx_sig_t *_y, int N, int ord, spx_mem_t *mem)
+{
+   spx_word16_t y[N+2];
+   spx_word16_t *yy;
+   yy = y+2;
+   __asm__ __volatile__
+   (
+   /* Register setup */
+   "R0 = %5;\n\t"      /*ord */
+   
+   "P1 = %3;\n\t"
+   "I1 = P1;\n\t"
+   "B1 = P1;\n\t"
+   "L1 = 0;\n\t"
+   
+   "P3 = %0;\n\t"
+   "I3 = P3;\n\t"
+   "L3 = 0;\n\t"
+   
+   "P4 = %6;\n\t"
+   "P0 = %1;\n\t"
+   "P1 = %2;\n\t"
+   
+   /* First sample */
+   "R1 = [P4++];\n\t"
+   "R1 <<= 1;\n\t"
+   "R2 = [P0++];\n\t"
+   "R1 = R1 + R2;\n\t"
+   "[P1++] = R1;\n\t"
+   "R1 <<= 2;\n\t"
+   "W[P3] = R1.H;\n\t"
+   "R2 <<= 2;\n\t"
+
+   /* Samples 1 to ord-1 (using memory) */
+   "R0 += -1;\n\t"
+   "R3 = 0;\n\t"
+   "LC0 = R0;\n\t"
+   "LOOP filter_start%= LC0;\n\t"
+   "LOOP_BEGIN filter_start%=;\n\t"
+      "R3 += 1;\n\t"
+      "LC1 = R3;\n\t"
+      
+      "R1 = [P4++];\n\t"
+      "A1 = R1;\n\t"
+      "I1 = B1;\n\t"
+      "I3 = P3;\n\t"
+      "P3 += 2;\n\t"
+      "LOOP filter_start_inner%= LC1;\n\t"
+      "LOOP_BEGIN filter_start_inner%=;\n\t"
+         "R4.L = W[I1++];\n\t"
+         "R5.L = W[I3--];\n\t"
+         "A1 -= R4.L*R5.L (IS);\n\t"
+      "LOOP_END filter_start_inner%=;\n\t"
+   
+      "R1 = A1;\n\t"
+      "R1 <<= 1;\n\t"
+      "R2 = [P0++];\n\t"
+      "R1 = R1 + R2;\n\t"
+      "[P1++] = R1;\n\t"
+      "R1 <<= 2;\n\t"
+      "W[P3] = R1.H;\n\t"
+      "R2 <<= 2;\n\t"
+   "LOOP_END filter_start%=;\n\t"
+
+   /* Samples ord to N*/   
+   "R0 = %5;\n\t"
+   "R0 <<= 1;\n\t"
+   "I1 = B1;\n\t"
+   "L1 = R0;\n\t"
+   
+   "R0 = %5;\n\t"
+   "R2 = %4;\n\t"
+   "R2 = R2 - R0;\n\t"
+   "R4.L = W[I1++];\n\t"
+   "LC0 = R2;\n\t"
+   "LOOP filter_mid%= LC0;\n\t"
+   "LOOP_BEGIN filter_mid%=;\n\t"
+      "LC1 = R0;\n\t"
+      "A1 = 0;\n\t"
+      "I3 = P3;\n\t"
+      "P3 += 2;\n\t"
+      "R5.L = W[I3--];\n\t"
+      "LOOP filter_mid_inner%= LC1;\n\t"
+      "LOOP_BEGIN filter_mid_inner%=;\n\t"
+         "A1 -= R4.L*R5.L (IS) || R4.L = W[I1++] || R5.L = W[I3--];\n\t"
+      "LOOP_END filter_mid_inner%=;\n\t"
+      "R1 = A1;\n\t"
+      "R1 = R1 << 1 || R2 = [P0++];\n\t"
+      "R1 = R1 + R2;\n\t"
+      "R1 = R1 << 2 || [P1++] = R1;\n\t"
+      "W[P3] = R1.H;\n\t"
+   "LOOP_END filter_mid%=;\n\t"
+     
+   /* Update memory */
+   "P4 = %6;\n\t"
+   "R0 = %5;\n\t"
+   "LC0 = R0;\n\t"
+   "P1 = B1;\n\t"
+   "LOOP mem_update%= LC0;\n\t"
+   "LOOP_BEGIN mem_update%=;\n\t"
+      "A0 = 0;\n\t"
+      "I3 = P3;\n\t"
+      "I1 = P1;\n\t"
+      "P1 += 2;\n\t"
+      "R0 = LC0;\n\t"
+      "LC1=R0;\n\t"
+      "R5.L = W[I3--] || R4.L = W[I1++];\n\t"
+      "LOOP mem_accum%= LC1;\n\t"
+      "LOOP_BEGIN mem_accum%=;\n\t"
+         "A0 -= R4.L*R5.L (IS) || R4.L = W[I1++] || R5.L = W[I3--];\n\t"
+      "LOOP_END mem_accum%=;\n\t"
+      "R0 = A0;\n\t"
+      "[P4++] = R0;\n\t"
+   "LOOP_END mem_update%=;\n\t"
+   "L1 = 0;\n\t"
+   : : "m" (yy), "m" (_x), "m" (_y), "m" (den), "m" (N), "m" (ord), "m" (mem)
+   : "A0", "A1", "R0", "R1", "R2", "R3", "R4", "R5", "P0", "P1", "P2", "P3", "P4", "B1", "I1", "I3", "L1", "L3", "memory"
+   );
+
+}
+
+
+#define OVERRIDE_IIR_MEM16
+void iir_mem16(const spx_word16_t *_x, const spx_coef_t *den, spx_word16_t *_y, int N, int ord, spx_mem_t *mem, char *stack)
+{
+   VARDECL(spx_word16_t *y);
+   spx_word16_t *yy;
+
+   ALLOC(y, (N+2), spx_word16_t);
+   yy = y+2;
+
+   __asm__ __volatile__
+   (
+   /* Register setup */
+   "R0 = %5;\n\t"      /*ord */
+   
+   "P1 = %3;\n\t"
+   "I1 = P1;\n\t"
+   "B1 = P1;\n\t"
+   "L1 = 0;\n\t"
+   
+   "P3 = %0;\n\t"
+   "I3 = P3;\n\t"
+   "L3 = 0;\n\t"
+   
+   "P4 = %6;\n\t"
+   "P0 = %1;\n\t"
+   "P1 = %2;\n\t"
+   
+   /* First sample */
+   "R1 = [P4++];\n\t"
+   "R1 = R1 << 3 (S);\n\t"
+   "R1.L = R1 (RND);\n\t"
+   "R2 = W[P0++];\n\t"
+   "R1 = R1 + R2;\n\t"
+   "W[P1++] = R1;\n\t"
+   "W[P3] = R1;\n\t"
+
+   /* Samples 1 to ord-1 (using memory) */
+   "R0 += -1;\n\t"
+   "R3 = 0;\n\t"
+   "LC0 = R0;\n\t"
+   "LOOP filter_start%= LC0;\n\t"
+   "LOOP_BEGIN filter_start%=;\n\t"
+      "R3 += 1;\n\t"
+      "LC1 = R3;\n\t"
+      
+      "R1 = [P4++];\n\t"
+      "A1 = R1;\n\t"
+      "I1 = B1;\n\t"
+      "I3 = P3;\n\t"
+      "P3 += 2;\n\t"
+      "LOOP filter_start_inner%= LC1;\n\t"
+      "LOOP_BEGIN filter_start_inner%=;\n\t"
+         "R4.L = W[I1++];\n\t"
+         "R5.L = W[I3--];\n\t"
+         "A1 -= R4.L*R5.L (IS);\n\t"
+      "LOOP_END filter_start_inner%=;\n\t"
+   
+      "R1 = A1;\n\t"
+      "R1 <<= 3;\n\t"
+      "R1.L = R1 (RND);\n\t"
+      "R2 = W[P0++];\n\t"
+      "R1 = R1 + R2;\n\t"
+      "W[P1++] = R1;\n\t"
+      "W[P3] = R1;\n\t"
+   "LOOP_END filter_start%=;\n\t"
+
+   /* Samples ord to N*/   
+   "R0 = %5;\n\t"
+   "R0 <<= 1;\n\t"
+   "I1 = B1;\n\t"
+   "L1 = R0;\n\t"
+   
+   "R0 = %5;\n\t"
+   "R2 = %4;\n\t"
+   "R2 = R2 - R0;\n\t"
+   "R4.L = W[I1++];\n\t"
+   "LC0 = R2;\n\t"
+   "LOOP filter_mid%= LC0;\n\t"
+   "LOOP_BEGIN filter_mid%=;\n\t"
+      "LC1 = R0;\n\t"
+      "A1 = 0;\n\t"
+      "I3 = P3;\n\t"
+      "P3 += 2;\n\t"
+      "R5.L = W[I3--];\n\t"
+      "LOOP filter_mid_inner%= LC1;\n\t"
+      "LOOP_BEGIN filter_mid_inner%=;\n\t"
+         "A1 -= R4.L*R5.L (IS) || R4.L = W[I1++] || R5.L = W[I3--];\n\t"
+      "LOOP_END filter_mid_inner%=;\n\t"
+      "R1 = A1;\n\t"
+      "R1 = R1 << 3 || R2 = W[P0++];\n\t"
+      "R1.L = R1 (RND);\n\t"
+      "R1 = R1 + R2;\n\t"
+      "W[P1++] = R1;\n\t"
+      "W[P3] = R1;\n\t"
+   "LOOP_END filter_mid%=;\n\t"
+     
+   /* Update memory */
+   "P4 = %6;\n\t"
+   "R0 = %5;\n\t"
+   "LC0 = R0;\n\t"
+   "P1 = B1;\n\t"
+   "LOOP mem_update%= LC0;\n\t"
+   "LOOP_BEGIN mem_update%=;\n\t"
+      "A0 = 0;\n\t"
+      "I3 = P3;\n\t"
+      "I1 = P1;\n\t"
+      "P1 += 2;\n\t"
+      "R0 = LC0;\n\t"
+      "LC1=R0;\n\t"
+      "R5.L = W[I3--] || R4.L = W[I1++];\n\t"
+      "LOOP mem_accum%= LC1;\n\t"
+      "LOOP_BEGIN mem_accum%=;\n\t"
+         "A0 -= R4.L*R5.L (IS) || R4.L = W[I1++] || R5.L = W[I3--];\n\t"
+      "LOOP_END mem_accum%=;\n\t"
+      "R0 = A0;\n\t"
+      "[P4++] = R0;\n\t"
+   "LOOP_END mem_update%=;\n\t"
+   "L1 = 0;\n\t"
+   : : "m" (yy), "m" (_x), "m" (_y), "m" (den), "m" (N), "m" (ord), "m" (mem)
+   : "A0", "A1", "R0", "R1", "R2", "R3", "R4", "R5", "P0", "P1", "P2", "P3", "P4", "B1", "I1", "I3", "L1", "L3", "memory"
+   );
+
+}
+
+
+#define OVERRIDE_FIR_MEM2
+void fir_mem2(const spx_sig_t *x, const spx_coef_t *num, spx_sig_t *y, int N, int ord, spx_mem_t *mem)
+{
+   int i;
+   spx_coef_t den2[12];
+   spx_coef_t *den;
+   den = (spx_coef_t*)((((int)den2)+4)&0xfffffffc);
+   for (i=0;i<10;i++)
+      den[i] = 0;
+   filter_mem2(x, num, den, y, N, ord, mem);
+}
+
+#define OVERRIDE_FIR_MEM16
+void fir_mem16(const spx_word16_t *x, const spx_coef_t *num, spx_word16_t *y, int N, int ord, spx_mem_t *mem, char *stack)
+{
+   int i;
+   spx_coef_t den2[12];
+   spx_coef_t *den;
+   den = (spx_coef_t*)((((int)den2)+4)&0xfffffffc);
+   for (i=0;i<10;i++)
+      den[i] = 0;
+   filter_mem16(x, num, den, y, N, ord, mem, stack);
+}
+
+
+#define OVERRIDE_COMPUTE_IMPULSE_RESPONSE
+void compute_impulse_response(const spx_coef_t *ak, const spx_coef_t *awk1, const spx_coef_t *awk2, spx_word16_t *y, int N, int ord, char *stack)
+{
+   int i;
+   VARDECL(spx_word16_t *ytmp);
+   ALLOC(ytmp, N, spx_word16_t);
+   spx_word16_t *ytmp2 = ytmp;
+   y[0] = LPC_SCALING;
+   for (i=0;i<ord;i++)
+      y[i+1] = awk1[i];
+   i++;
+   for (;i<N;i++)
+      y[i] = 0;
+
+   N-=1;
+   __asm__ __volatile__
+   (
+         "I0 = %0;\n\t"
+         "I1 = %1;\n\t"
+         "L0 = 0;\n\t"
+         "L1 = 0;\n\t"
+         "L2 = 0;\n\t"
+         "L3 = 0;\n\t"
+         "R0 = 1;\n\t"
+         "R0 <<= 13;\n\t"
+         "W[I0] = R0.L;\n\t"
+         "R0 <<= 1;\n\t"
+         "W[I1] = R0.L;\n\t"
+         "R0 = %5;\n\t"
+         "LC0 = R0;\n\t"
+         "R2 = 0;\n\t"
+         "LOOP samples%= LC0;\n\t"
+         "LOOP_BEGIN samples%=;\n\t"
+            "R2 += 1;\n\t"
+            "R2 = MIN(R2, %4);\n\t"
+            "I0 = %0;\n\t"
+            "I1 = %1;\n\t"
+            "I2 = %2;\n\t"
+            "I3 = %3;\n\t"
+            "%0 += 2;\n\t"
+            "%1 += 2;\n\t"
+            "A1 = A0 = 0;\n\t"
+            "R0.L = W[I0--] || R1.L = W[I2++];\n\t"
+            "LC1 = R2;\n\t"
+            "LOOP filter%= LC1;\n\t"
+            "LOOP_BEGIN filter%=;\n\t"
+               "A0 -= R0.L*R1.L (IS) || R0.L = W[I1--] || R1.L = W[I3++];\n\t"
+               "A1 -= R0.L*R1.L (IS) || R0.L = W[I0--] || R1.L = W[I2++];\n\t"
+            "LOOP_END filter%=;\n\t"
+            "R0 = A0, R1 = A1;\n\t"
+            "R3 = W[%1] (X);\n\t"
+            "R3 <<= 13;\n\t"
+            "R0 = R0 + R3;\n\t"
+            "R3 = R0 >>> 13;\n\t"
+            "W[%0] = R3.L;\n\t"
+            "R0 <<= 1;\n\t"
+            "R1 = R1 + R0;\n\t"
+            "R1 >>>= 13;\n\t"
+            "W[%1] = R1.L;\n\t"
+         "LOOP_END samples%=;\n\t"
+   : "=a" (ytmp2), "=a" (y)
+   : "a" (awk2), "a" (ak), "d" (ord), "m" (N), "0" (ytmp2), "1" (y)
+   : "A0", "A1", "R0", "R1", "R2", "R3", "I0", "I1", "I2", "I3", "L0", "L1", "L2", "L3", "A0", "A1"
+   );
+}
+
+
+
+#if 0 /* Equivalent C function for filter_mem2 and compute_impulse_response */
+#define min(a,b) ((a)<(b) ? (a):(b))
+
+void compute_impulse_response(const spx_coef_t *ak, const spx_coef_t *awk1, const spx_coef_t *awk2, spx_word16_t *y, int N, int ord, char *stack)
+{
+   int i,j;
+   VARDECL(spx_word16_t *ytmp);
+   ALLOC(ytmp, N, spx_word16_t);
+   
+   y[0] = LPC_SCALING;
+   for (i=0;i<ord;i++)
+      y[i+1] = awk1[i];
+   i++;
+   for (;i<N;i++)
+      y[i] = 0;
+
+   for (i=0;i<N;i++)
+   {
+      spx_word32_t yi = SHL32(EXTEND32(y[i]),LPC_SHIFT);
+      spx_word32_t yi2 = 0;
+      for (j=0;j<min(i,ord);j++)
+      {
+         yi = MAC16_16(yi, awk2[j], -ytmp[i-j-1]);
+         yi2 = MAC16_16(yi2, ak[j], -y[i-j-1]);
+      }
+      ytmp[i] = EXTRACT16(SHR32(yi,LPC_SHIFT));
+      yi2 = ADD32(yi2,SHL32(yi,1));
+      y[i] = EXTRACT16(SHR32(yi2,LPC_SHIFT));
+   }
+
+}
+
+
+void filter_mem2(const spx_sig_t *_x, const spx_coef_t *num, const spx_coef_t *den, spx_sig_t *_y, int N, int ord, spx_mem_t *mem)
+{
+   int i,j;
+   spx_word16_t xi,yi,nyi;
+   spx_word16_t x[N],y[N];
+   spx_word16_t *xx, *yy;
+   xx = x;
+   yy = y;
+   for (i=0;i<N;i++)
+   {
+      x[i] = EXTRACT16(SHR32(_x[i],SIG_SHIFT));
+   }
+   
+   for (i=0;i<ord;i++)
+   {
+      spx_word32_t yi = mem[i];
+      for (j=0;j<i;j++)
+      {
+         yi = MAC16_16(yi, num[j], x[i-j-1]);
+         yi = MAC16_16(yi, den[j], -y[i-j-1]);
+      }
+      _y[i] = ADD32(_x[i],SHL32(yi,1));
+      y[i] = EXTRACT16(SHR32(_y[i],SIG_SHIFT));
+   }
+   for (i=ord;i<N;i++)
+   {
+      spx_word32_t yi = 0;
+      for (j=0;j<ord;j++)
+      {
+         yi = MAC16_16(yi, num[j], x[i-j-1]);
+         yi = MAC16_16(yi, den[j], -y[i-j-1]);
+      }
+      _y[i] = ADD32(_x[i],SHL32(yi,1));
+      y[i] = EXTRACT16(SHR32(_y[i],SIG_SHIFT));
+   }
+
+   for (i=0;i<ord;i++)
+   {
+      spx_mem_t m = 0;
+      for (j=0;j<ord-i;j++)
+      {
+         m = MAC16_16(m, x[N-1-j], num[j+i]);
+         m = MAC16_16(m, -y[N-1-j], den[j+i]);
+      }
+      mem[i] = m;
+   }
+}
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/filters_sse.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/filters_sse.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,336 @@
+/* Copyright (C) 2002 Jean-Marc Valin */
+/**
+   @file filters_sse.h
+   @brief Various analysis/synthesis filters (SSE version)
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#include <xmmintrin.h>
+
+void filter_mem2_10(const float *x, const float *_num, const float *_den, float *y, int N, int ord, float *_mem)
+{
+   __m128 num[3], den[3], mem[3];
+
+   int i;
+
+   /* Copy numerator, denominator and memory to aligned xmm */
+   for (i=0;i<2;i++)
+   {
+      mem[i] = _mm_loadu_ps(_mem+4*i);
+      num[i] = _mm_loadu_ps(_num+4*i);
+      den[i] = _mm_loadu_ps(_den+4*i);
+   }
+   mem[2] = _mm_setr_ps(_mem[8], _mem[9], 0, 0);
+   num[2] = _mm_setr_ps(_num[8], _num[9], 0, 0);
+   den[2] = _mm_setr_ps(_den[8], _den[9], 0, 0);
+   
+   for (i=0;i<N;i++)
+   {
+      __m128 xx;
+      __m128 yy;
+      /* Compute next filter result */
+      xx = _mm_load_ps1(x+i);
+      yy = _mm_add_ss(xx, mem[0]);
+      _mm_store_ss(y+i, yy);
+      yy = _mm_shuffle_ps(yy, yy, 0);
+      
+      /* Update memory */
+      mem[0] = _mm_move_ss(mem[0], mem[1]);
+      mem[0] = _mm_shuffle_ps(mem[0], mem[0], 0x39);
+
+      mem[0] = _mm_add_ps(mem[0], _mm_mul_ps(xx, num[0]));
+      mem[0] = _mm_sub_ps(mem[0], _mm_mul_ps(yy, den[0]));
+
+      mem[1] = _mm_move_ss(mem[1], mem[2]);
+      mem[1] = _mm_shuffle_ps(mem[1], mem[1], 0x39);
+
+      mem[1] = _mm_add_ps(mem[1], _mm_mul_ps(xx, num[1]));
+      mem[1] = _mm_sub_ps(mem[1], _mm_mul_ps(yy, den[1]));
+
+      mem[2] = _mm_shuffle_ps(mem[2], mem[2], 0xfd);
+
+      mem[2] = _mm_add_ps(mem[2], _mm_mul_ps(xx, num[2]));
+      mem[2] = _mm_sub_ps(mem[2], _mm_mul_ps(yy, den[2]));
+   }
+   /* Put memory back in its place */
+   _mm_storeu_ps(_mem, mem[0]);
+   _mm_storeu_ps(_mem+4, mem[1]);
+   _mm_store_ss(_mem+8, mem[2]);
+   mem[2] = _mm_shuffle_ps(mem[2], mem[2], 0x55);
+   _mm_store_ss(_mem+9, mem[2]);
+}
+
+void filter_mem2_8(const float *x, const float *_num, const float *_den, float *y, int N, int ord, float *_mem)
+{
+   __m128 num[2], den[2], mem[2];
+
+   int i;
+
+   /* Copy numerator, denominator and memory to aligned xmm */
+   for (i=0;i<2;i++)
+   {
+      mem[i] = _mm_loadu_ps(_mem+4*i);
+      num[i] = _mm_loadu_ps(_num+4*i);
+      den[i] = _mm_loadu_ps(_den+4*i);
+   }
+   
+   for (i=0;i<N;i++)
+   {
+      __m128 xx;
+      __m128 yy;
+      /* Compute next filter result */
+      xx = _mm_load_ps1(x+i);
+      yy = _mm_add_ss(xx, mem[0]);
+      _mm_store_ss(y+i, yy);
+      yy = _mm_shuffle_ps(yy, yy, 0);
+      
+      /* Update memory */
+      mem[0] = _mm_move_ss(mem[0], mem[1]);
+      mem[0] = _mm_shuffle_ps(mem[0], mem[0], 0x39);
+
+      mem[0] = _mm_add_ps(mem[0], _mm_mul_ps(xx, num[0]));
+      mem[0] = _mm_sub_ps(mem[0], _mm_mul_ps(yy, den[0]));
+
+      mem[1] = _mm_sub_ss(mem[1], mem[1]);
+      mem[1] = _mm_shuffle_ps(mem[1], mem[1], 0x39);
+
+      mem[1] = _mm_add_ps(mem[1], _mm_mul_ps(xx, num[1]));
+      mem[1] = _mm_sub_ps(mem[1], _mm_mul_ps(yy, den[1]));
+   }
+   /* Put memory back in its place */
+   _mm_storeu_ps(_mem, mem[0]);
+   _mm_storeu_ps(_mem+4, mem[1]);
+}
+
+
+#define OVERRIDE_FILTER_MEM2
+void filter_mem2(const float *x, const float *_num, const float *_den, float *y, int N, int ord, float *_mem)
+{
+   if(ord==10)
+      filter_mem2_10(x, _num, _den, y, N, ord, _mem);
+   else if (ord==8)
+      filter_mem2_8(x, _num, _den, y, N, ord, _mem);
+}
+
+
+
+void iir_mem2_10(const float *x, const float *_den, float *y, int N, int ord, float *_mem)
+{
+   __m128 den[3], mem[3];
+
+   int i;
+
+   /* Copy numerator, denominator and memory to aligned xmm */
+   for (i=0;i<2;i++)
+   {
+      mem[i] = _mm_loadu_ps(_mem+4*i);
+      den[i] = _mm_loadu_ps(_den+4*i);
+   }
+   mem[2] = _mm_setr_ps(_mem[8], _mem[9], 0, 0);
+   den[2] = _mm_setr_ps(_den[8], _den[9], 0, 0);
+   
+   for (i=0;i<N;i++)
+   {
+      __m128 xx;
+      __m128 yy;
+      /* Compute next filter result */
+      xx = _mm_load_ps1(x+i);
+      yy = _mm_add_ss(xx, mem[0]);
+      _mm_store_ss(y+i, yy);
+      yy = _mm_shuffle_ps(yy, yy, 0);
+      
+      /* Update memory */
+      mem[0] = _mm_move_ss(mem[0], mem[1]);
+      mem[0] = _mm_shuffle_ps(mem[0], mem[0], 0x39);
+
+      mem[0] = _mm_sub_ps(mem[0], _mm_mul_ps(yy, den[0]));
+
+      mem[1] = _mm_move_ss(mem[1], mem[2]);
+      mem[1] = _mm_shuffle_ps(mem[1], mem[1], 0x39);
+
+      mem[1] = _mm_sub_ps(mem[1], _mm_mul_ps(yy, den[1]));
+
+      mem[2] = _mm_shuffle_ps(mem[2], mem[2], 0xfd);
+
+      mem[2] = _mm_sub_ps(mem[2], _mm_mul_ps(yy, den[2]));
+   }
+   /* Put memory back in its place */
+   _mm_storeu_ps(_mem, mem[0]);
+   _mm_storeu_ps(_mem+4, mem[1]);
+   _mm_store_ss(_mem+8, mem[2]);
+   mem[2] = _mm_shuffle_ps(mem[2], mem[2], 0x55);
+   _mm_store_ss(_mem+9, mem[2]);
+}
+
+
+void iir_mem2_8(const float *x, const float *_den, float *y, int N, int ord, float *_mem)
+{
+   __m128 den[2], mem[2];
+
+   int i;
+
+   /* Copy numerator, denominator and memory to aligned xmm */
+   for (i=0;i<2;i++)
+   {
+      mem[i] = _mm_loadu_ps(_mem+4*i);
+      den[i] = _mm_loadu_ps(_den+4*i);
+   }
+   
+   for (i=0;i<N;i++)
+   {
+      __m128 xx;
+      __m128 yy;
+      /* Compute next filter result */
+      xx = _mm_load_ps1(x+i);
+      yy = _mm_add_ss(xx, mem[0]);
+      _mm_store_ss(y+i, yy);
+      yy = _mm_shuffle_ps(yy, yy, 0);
+      
+      /* Update memory */
+      mem[0] = _mm_move_ss(mem[0], mem[1]);
+      mem[0] = _mm_shuffle_ps(mem[0], mem[0], 0x39);
+
+      mem[0] = _mm_sub_ps(mem[0], _mm_mul_ps(yy, den[0]));
+
+      mem[1] = _mm_sub_ss(mem[1], mem[1]);
+      mem[1] = _mm_shuffle_ps(mem[1], mem[1], 0x39);
+
+      mem[1] = _mm_sub_ps(mem[1], _mm_mul_ps(yy, den[1]));
+   }
+   /* Put memory back in its place */
+   _mm_storeu_ps(_mem, mem[0]);
+   _mm_storeu_ps(_mem+4, mem[1]);
+}
+
+#define OVERRIDE_IIR_MEM2
+void iir_mem2(const float *x, const float *_den, float *y, int N, int ord, float *_mem)
+{
+   if(ord==10)
+      iir_mem2_10(x, _den, y, N, ord, _mem);
+   else if (ord==8)
+      iir_mem2_8(x, _den, y, N, ord, _mem);
+}
+
+
+void fir_mem2_10(const float *x, const float *_num, float *y, int N, int ord, float *_mem)
+{
+   __m128 num[3], mem[3];
+
+   int i;
+
+   /* Copy numerator, denominator and memory to aligned xmm */
+   for (i=0;i<2;i++)
+   {
+      mem[i] = _mm_loadu_ps(_mem+4*i);
+      num[i] = _mm_loadu_ps(_num+4*i);
+   }
+   mem[2] = _mm_setr_ps(_mem[8], _mem[9], 0, 0);
+   num[2] = _mm_setr_ps(_num[8], _num[9], 0, 0);
+   
+   for (i=0;i<N;i++)
+   {
+      __m128 xx;
+      __m128 yy;
+      /* Compute next filter result */
+      xx = _mm_load_ps1(x+i);
+      yy = _mm_add_ss(xx, mem[0]);
+      _mm_store_ss(y+i, yy);
+      yy = _mm_shuffle_ps(yy, yy, 0);
+      
+      /* Update memory */
+      mem[0] = _mm_move_ss(mem[0], mem[1]);
+      mem[0] = _mm_shuffle_ps(mem[0], mem[0], 0x39);
+
+      mem[0] = _mm_add_ps(mem[0], _mm_mul_ps(xx, num[0]));
+
+      mem[1] = _mm_move_ss(mem[1], mem[2]);
+      mem[1] = _mm_shuffle_ps(mem[1], mem[1], 0x39);
+
+      mem[1] = _mm_add_ps(mem[1], _mm_mul_ps(xx, num[1]));
+
+      mem[2] = _mm_shuffle_ps(mem[2], mem[2], 0xfd);
+
+      mem[2] = _mm_add_ps(mem[2], _mm_mul_ps(xx, num[2]));
+   }
+   /* Put memory back in its place */
+   _mm_storeu_ps(_mem, mem[0]);
+   _mm_storeu_ps(_mem+4, mem[1]);
+   _mm_store_ss(_mem+8, mem[2]);
+   mem[2] = _mm_shuffle_ps(mem[2], mem[2], 0x55);
+   _mm_store_ss(_mem+9, mem[2]);
+}
+
+void fir_mem2_8(const float *x, const float *_num, float *y, int N, int ord, float *_mem)
+{
+   __m128 num[2], mem[2];
+
+   int i;
+
+   /* Copy numerator, denominator and memory to aligned xmm */
+   for (i=0;i<2;i++)
+   {
+      mem[i] = _mm_loadu_ps(_mem+4*i);
+      num[i] = _mm_loadu_ps(_num+4*i);
+   }
+   
+   for (i=0;i<N;i++)
+   {
+      __m128 xx;
+      __m128 yy;
+      /* Compute next filter result */
+      xx = _mm_load_ps1(x+i);
+      yy = _mm_add_ss(xx, mem[0]);
+      _mm_store_ss(y+i, yy);
+      yy = _mm_shuffle_ps(yy, yy, 0);
+      
+      /* Update memory */
+      mem[0] = _mm_move_ss(mem[0], mem[1]);
+      mem[0] = _mm_shuffle_ps(mem[0], mem[0], 0x39);
+
+      mem[0] = _mm_add_ps(mem[0], _mm_mul_ps(xx, num[0]));
+
+      mem[1] = _mm_sub_ss(mem[1], mem[1]);
+      mem[1] = _mm_shuffle_ps(mem[1], mem[1], 0x39);
+
+      mem[1] = _mm_add_ps(mem[1], _mm_mul_ps(xx, num[1]));
+   }
+   /* Put memory back in its place */
+   _mm_storeu_ps(_mem, mem[0]);
+   _mm_storeu_ps(_mem+4, mem[1]);
+}
+
+#define OVERRIDE_FIR_MEM2
+void fir_mem2(const float *x, const float *_num, float *y, int N, int ord, float *_mem)
+{
+   if(ord==10)
+      fir_mem2_10(x, _num, y, N, ord, _mem);
+   else if (ord==8)
+      fir_mem2_8(x, _num, y, N, ord, _mem);
+}

Added: freeswitch/trunk/libs/speex/libspeex/fixed_arm4.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/fixed_arm4.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,148 @@
+/* Copyright (C) 2004 Jean-Marc Valin */
+/**
+   @file fixed_arm4.h
+   @brief ARM4 fixed-point operations
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef FIXED_ARM4_H
+#define FIXED_ARM4_H
+
+#undef MULT16_32_Q14
+static inline spx_word32_t MULT16_32_Q14(spx_word16_t x, spx_word32_t y) {
+  int res;
+  int dummy;
+  asm (
+        "smull  %0,%1,%2,%3 \n\t"
+        "mov %0, %0, lsr #14 \n\t"
+        "add %0, %0, %1, lsl #18 \n\t"
+   : "=&r"(res), "=&r" (dummy)
+   : "r"(y),"r"((int)x));
+  return(res);
+}
+
+#undef MULT16_32_Q15
+static inline spx_word32_t MULT16_32_Q15(spx_word16_t x, spx_word32_t y) {
+  int res;
+  int dummy;
+  asm (
+        "smull  %0,%1,%2,%3 \n\t"
+        "mov %0, %0, lsr #15 \n\t"
+        "add %0, %0, %1, lsl #17 \n\t"
+   : "=&r"(res), "=&r" (dummy)
+   : "r"(y),"r"((int)x));
+  return(res);
+}
+
+#undef DIV32_16
+static inline short DIV32_16(int a, int b)
+{
+   int res=0;
+   int dead1, dead2, dead3, dead4, dead5;
+   __asm__ __volatile__ (
+         "\teor %5, %0, %1\n"
+         "\tmovs %4, %0\n"
+         "\trsbmi %0, %0, #0 \n"
+         "\tmovs %4, %1\n"
+         "\trsbmi %1, %1, #0 \n"
+         "\tmov %4, #1\n"
+
+         "\tsubs %3, %0, %1, asl #14 \n"
+         "\tmovpl %0, %3 \n"
+         "\torrpl %2, %2, %4, asl #14 \n"
+
+         "\tsubs %3, %0, %1, asl #13 \n"
+         "\tmovpl %0, %3 \n"
+         "\torrpl %2, %2, %4, asl #13 \n"
+
+         "\tsubs %3, %0, %1, asl #12 \n"
+         "\tmovpl %0, %3 \n"
+         "\torrpl %2, %2, %4, asl #12 \n"
+
+         "\tsubs %3, %0, %1, asl #11 \n"
+         "\tmovpl %0, %3 \n"
+         "\torrpl %2, %2, %4, asl #11 \n"
+
+         "\tsubs %3, %0, %1, asl #10 \n"
+         "\tmovpl %0, %3 \n"
+         "\torrpl %2, %2, %4, asl #10 \n"
+
+         "\tsubs %3, %0, %1, asl #9 \n"
+         "\tmovpl %0, %3 \n"
+         "\torrpl %2, %2, %4, asl #9 \n"
+
+         "\tsubs %3, %0, %1, asl #8 \n"
+         "\tmovpl %0, %3 \n"
+         "\torrpl %2, %2, %4, asl #8 \n"
+
+         "\tsubs %3, %0, %1, asl #7 \n"
+         "\tmovpl %0, %3 \n"
+         "\torrpl %2, %2, %4, asl #7 \n"
+
+         "\tsubs %3, %0, %1, asl #6 \n"
+         "\tmovpl %0, %3 \n"
+         "\torrpl %2, %2, %4, asl #6 \n"
+         
+         "\tsubs %3, %0, %1, asl #5 \n"
+         "\tmovpl %0, %3 \n"
+         "\torrpl %2, %2, %4, asl #5 \n"
+
+         "\tsubs %3, %0, %1, asl #4 \n"
+         "\tmovpl %0, %3 \n"
+         "\torrpl %2, %2, %4, asl #4 \n"
+
+         "\tsubs %3, %0, %1, asl #3 \n"
+         "\tmovpl %0, %3 \n"
+         "\torrpl %2, %2, %4, asl #3 \n"
+
+         "\tsubs %3, %0, %1, asl #2 \n"
+         "\tmovpl %0, %3 \n"
+         "\torrpl %2, %2, %4, asl #2 \n"
+
+         "\tsubs %3, %0, %1, asl #1 \n"
+         "\tmovpl %0, %3 \n"
+         "\torrpl %2, %2, %4, asl #1 \n"
+
+         "\tsubs %3, %0, %1 \n"
+         "\tmovpl %0, %3 \n"
+         "\torrpl %2, %2, %4 \n"
+
+         "\tmovs %5, %5, lsr #31 \n"
+         "\trsbne %2, %2, #0 \n"
+   : "=r" (dead1), "=r" (dead2), "=r" (res),
+   "=r" (dead3), "=r" (dead4), "=r" (dead5)
+   : "0" (a), "1" (b), "2" (res)
+   : "cc"
+                        );
+   return res;
+}
+
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/fixed_arm5e.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/fixed_arm5e.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,178 @@
+/* Copyright (C) 2003 Jean-Marc Valin */
+/**
+   @file fixed_arm5e.h
+   @brief ARM-tuned fixed-point operations
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef FIXED_ARM5E_H
+#define FIXED_ARM5E_H
+
+#undef MULT16_16
+static inline spx_word32_t MULT16_16(spx_word16_t x, spx_word16_t y) {
+  int res;
+  asm ("smulbb  %0,%1,%2;\n"
+              : "=&r"(res)
+              : "%r"(x),"r"(y));
+  return(res);
+}
+
+#undef MAC16_16
+static inline spx_word32_t MAC16_16(spx_word32_t a, spx_word16_t x, spx_word32_t y) {
+  int res;
+  asm ("smlabb  %0,%1,%2,%3;\n"
+              : "=&r"(res)
+               : "%r"(x),"r"(y),"r"(a));
+  return(res);
+}
+
+#undef MULT16_32_Q15
+static inline spx_word32_t MULT16_32_Q15(spx_word16_t x, spx_word32_t y) {
+  int res;
+  asm ("smulwb  %0,%1,%2;\n"
+              : "=&r"(res)
+               : "%r"(y<<1),"r"(x));
+  return(res);
+}
+
+#undef MAC16_32_Q15
+static inline spx_word32_t MAC16_32_Q15(spx_word32_t a, spx_word16_t x, spx_word32_t y) {
+  int res;
+  asm ("smlawb  %0,%1,%2,%3;\n"
+              : "=&r"(res)
+               : "%r"(y<<1),"r"(x),"r"(a));
+  return(res);
+}
+
+#undef MULT16_32_Q11
+static inline spx_word32_t MULT16_32_Q11(spx_word16_t x, spx_word32_t y) {
+  int res;
+  asm ("smulwb  %0,%1,%2;\n"
+              : "=&r"(res)
+               : "%r"(y<<5),"r"(x));
+  return(res);
+}
+
+#undef MAC16_32_Q11
+static inline spx_word32_t MAC16_32_Q11(spx_word32_t a, spx_word16_t x, spx_word32_t y) {
+  int res;
+  asm ("smlawb  %0,%1,%2,%3;\n"
+              : "=&r"(res)
+               : "%r"(y<<5),"r"(x),"r"(a));
+  return(res);
+}
+
+#undef DIV32_16
+static inline short DIV32_16(int a, int b)
+{
+   int res=0;
+   int dead1, dead2, dead3, dead4, dead5;
+   __asm__ __volatile__ (
+         "\teor %5, %0, %1\n"
+         "\tmovs %4, %0\n"
+         "\trsbmi %0, %0, #0 \n"
+         "\tmovs %4, %1\n"
+         "\trsbmi %1, %1, #0 \n"
+         "\tmov %4, #1\n"
+
+         "\tsubs %3, %0, %1, asl #14 \n"
+         "\torrpl %2, %2, %4, asl #14 \n"
+         "\tmovpl %0, %3 \n"
+
+         "\tsubs %3, %0, %1, asl #13 \n"
+         "\torrpl %2, %2, %4, asl #13 \n"
+         "\tmovpl %0, %3 \n"
+
+         "\tsubs %3, %0, %1, asl #12 \n"
+         "\torrpl %2, %2, %4, asl #12 \n"
+         "\tmovpl %0, %3 \n"
+
+         "\tsubs %3, %0, %1, asl #11 \n"
+         "\torrpl %2, %2, %4, asl #11 \n"
+         "\tmovpl %0, %3 \n"
+
+         "\tsubs %3, %0, %1, asl #10 \n"
+         "\torrpl %2, %2, %4, asl #10 \n"
+         "\tmovpl %0, %3 \n"
+
+         "\tsubs %3, %0, %1, asl #9 \n"
+         "\torrpl %2, %2, %4, asl #9 \n"
+         "\tmovpl %0, %3 \n"
+
+         "\tsubs %3, %0, %1, asl #8 \n"
+         "\torrpl %2, %2, %4, asl #8 \n"
+         "\tmovpl %0, %3 \n"
+
+         "\tsubs %3, %0, %1, asl #7 \n"
+         "\torrpl %2, %2, %4, asl #7 \n"
+         "\tmovpl %0, %3 \n"
+
+         "\tsubs %3, %0, %1, asl #6 \n"
+         "\torrpl %2, %2, %4, asl #6 \n"
+         "\tmovpl %0, %3 \n"
+
+         "\tsubs %3, %0, %1, asl #5 \n"
+         "\torrpl %2, %2, %4, asl #5 \n"
+         "\tmovpl %0, %3 \n"
+
+         "\tsubs %3, %0, %1, asl #4 \n"
+         "\torrpl %2, %2, %4, asl #4 \n"
+         "\tmovpl %0, %3 \n"
+
+         "\tsubs %3, %0, %1, asl #3 \n"
+         "\torrpl %2, %2, %4, asl #3 \n"
+         "\tmovpl %0, %3 \n"
+
+         "\tsubs %3, %0, %1, asl #2 \n"
+         "\torrpl %2, %2, %4, asl #2 \n"
+         "\tmovpl %0, %3 \n"
+
+         "\tsubs %3, %0, %1, asl #1 \n"
+         "\torrpl %2, %2, %4, asl #1 \n"
+         "\tmovpl %0, %3 \n"
+
+         "\tsubs %3, %0, %1 \n"
+         "\torrpl %2, %2, %4 \n"
+         "\tmovpl %0, %3 \n"
+         
+         "\tmovs %5, %5, lsr #31 \n"
+         "\trsbne %2, %2, #0 \n"
+   : "=r" (dead1), "=r" (dead2), "=r" (res),
+   "=r" (dead3), "=r" (dead4), "=r" (dead5)
+   : "0" (a), "1" (b), "2" (res)
+   : "memory", "cc"
+                        );
+   return res;
+}
+
+
+
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/fixed_bfin.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/fixed_bfin.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,173 @@
+/* Copyright (C) 2005 Analog Devices
+   Author: Jean-Marc Valin */
+/**
+   @file fixed_bfin.h
+   @brief Blackfin fixed-point operations
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef FIXED_BFIN_H
+#define FIXED_BFIN_H
+
+#undef PDIV32_16
+static inline spx_word16_t PDIV32_16(spx_word32_t a, spx_word16_t b)
+{
+   spx_word32_t res, bb;
+   bb = b;
+   a += b>>1;
+   __asm__  (
+         "P0 = 15;\n\t"
+         "R0 = %1;\n\t"
+         "R1 = %2;\n\t"
+         //"R0 = R0 + R1;\n\t"
+         "R0 <<= 1;\n\t"
+         "DIVS (R0, R1);\n\t"
+         "LOOP divide%= LC0 = P0;\n\t"
+         "LOOP_BEGIN divide%=;\n\t"
+            "DIVQ (R0, R1);\n\t"
+         "LOOP_END divide%=;\n\t"
+         "R0 = R0.L;\n\t"
+         "%0 = R0;\n\t"
+   : "=m" (res)
+   : "m" (a), "m" (bb)
+   : "P0", "R0", "R1", "cc");
+   return res;
+}
+
+#undef DIV32_16
+static inline spx_word16_t DIV32_16(spx_word32_t a, spx_word16_t b)
+{
+   spx_word32_t res, bb;
+   bb = b;
+   /* Make the roundinf consistent with the C version 
+      (do we need to do that?)*/
+   if (a<0) 
+      a += (b-1);
+   __asm__  (
+         "P0 = 15;\n\t"
+         "R0 = %1;\n\t"
+         "R1 = %2;\n\t"
+         "R0 <<= 1;\n\t"
+         "DIVS (R0, R1);\n\t"
+         "LOOP divide%= LC0 = P0;\n\t"
+         "LOOP_BEGIN divide%=;\n\t"
+            "DIVQ (R0, R1);\n\t"
+         "LOOP_END divide%=;\n\t"
+         "R0 = R0.L;\n\t"
+         "%0 = R0;\n\t"
+   : "=m" (res)
+   : "m" (a), "m" (bb)
+   : "P0", "R0", "R1", "cc");
+   return res;
+}
+
+#undef MAX16
+static inline spx_word16_t MAX16(spx_word16_t a, spx_word16_t b)
+{
+   spx_word32_t res;
+   __asm__  (
+         "%1 = %1.L (X);\n\t"
+         "%2 = %2.L (X);\n\t"
+         "%0 = MAX(%1,%2);"
+   : "=d" (res)
+   : "%d" (a), "d" (b)
+   );
+   return res;
+}
+
+#undef MULT16_32_Q15
+static inline spx_word32_t MULT16_32_Q15(spx_word16_t a, spx_word32_t b)
+{
+   spx_word32_t res;
+   __asm__
+   (
+         "A1 = %2.L*%1.L (M);\n\t"
+         "A1 = A1 >>> 15;\n\t"
+         "%0 = (A1 += %2.L*%1.H) ;\n\t"
+   : "=&W" (res), "=&d" (b)
+   : "d" (a), "1" (b)
+   : "A1"
+   );
+   return res;
+}
+
+#undef MAC16_32_Q15
+static inline spx_word32_t MAC16_32_Q15(spx_word32_t c, spx_word16_t a, spx_word32_t b)
+{
+   spx_word32_t res;
+   __asm__
+         (
+         "A1 = %2.L*%1.L (M);\n\t"
+         "A1 = A1 >>> 15;\n\t"
+         "%0 = (A1 += %2.L*%1.H);\n\t"
+         "%0 = %0 + %4;\n\t"
+   : "=&W" (res), "=&d" (b)
+   : "d" (a), "1" (b), "d" (c)
+   : "A1"
+         );
+   return res;
+}
+
+#undef MULT16_32_Q14
+static inline spx_word32_t MULT16_32_Q14(spx_word16_t a, spx_word32_t b)
+{
+   spx_word32_t res;
+   __asm__
+         (
+         "%2 <<= 1;\n\t"
+         "A1 = %1.L*%2.L (M);\n\t"
+         "A1 = A1 >>> 15;\n\t"
+         "%0 = (A1 += %1.L*%2.H);\n\t"
+   : "=W" (res), "=d" (a), "=d" (b)
+   : "1" (a), "2" (b)
+   : "A1"
+         );
+   return res;
+}
+
+#undef MAC16_32_Q14
+static inline spx_word32_t MAC16_32_Q14(spx_word32_t c, spx_word16_t a, spx_word32_t b)
+{
+   spx_word32_t res;
+   __asm__
+         (
+         "%1 <<= 1;\n\t"
+         "A1 = %2.L*%1.L (M);\n\t"
+         "A1 = A1 >>> 15;\n\t"
+         "%0 = (A1 += %2.L*%1.H);\n\t"
+         "%0 = %0 + %4;\n\t"
+   : "=&W" (res), "=&d" (b)
+   : "d" (a), "1" (b), "d" (c)
+   : "A1"
+         );
+   return res;
+}
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/fixed_debug.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/fixed_debug.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,448 @@
+/* Copyright (C) 2003 Jean-Marc Valin */
+/**
+   @file fixed_debug.h
+   @brief Fixed-point operations with debugging
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef FIXED_DEBUG_H
+#define FIXED_DEBUG_H
+
+#include <stdio.h>
+
+extern long long spx_mips;
+#define MIPS_INC spx_mips++,
+
+#define QCONST16(x,bits) ((spx_word16_t)(.5+(x)*(((spx_word32_t)1)<<(bits))))
+#define QCONST32(x,bits) ((spx_word32_t)(.5+(x)*(((spx_word32_t)1)<<(bits))))
+
+
+#define VERIFY_SHORT(x) ((x)<=32767&&(x)>=-32768)
+#define VERIFY_INT(x) ((x)<=2147483647LL&&(x)>=-2147483648LL)
+
+static inline short NEG16(int x)
+{
+   int res;
+   if (!VERIFY_SHORT(x))
+   {
+      fprintf (stderr, "NEG16: input is not short: %d\n", (int)x);
+   }
+   res = -x;
+   if (!VERIFY_SHORT(res))
+      fprintf (stderr, "NEG16: output is not short: %d\n", (int)res);
+   spx_mips++;
+   return res;
+}
+static inline int NEG32(long long x)
+{
+   long long res;
+   if (!VERIFY_INT(x))
+   {
+      fprintf (stderr, "NEG16: input is not int: %d\n", (int)x);
+   }
+   res = -x;
+   if (!VERIFY_INT(res))
+      fprintf (stderr, "NEG16: output is not int: %d\n", (int)res);
+   spx_mips++;
+   return res;
+}
+
+static inline short EXTRACT16(int x)
+{
+   int res;
+   if (!VERIFY_SHORT(x))
+   {
+      fprintf (stderr, "EXTRACT16: input is not short: %d\n", x);
+   }
+   res = x;
+   spx_mips++;
+   return res;
+}
+
+static inline int EXTEND32(int x)
+{
+   int res;
+   if (!VERIFY_SHORT(x))
+   {
+      fprintf (stderr, "EXTRACT16: input is not short: %d\n", x);
+   }
+   res = x;
+   spx_mips++;
+   return res;
+}
+
+static inline short SHR16(int a, int shift) 
+{
+   int res;
+   if (!VERIFY_SHORT(a) || !VERIFY_SHORT(shift))
+   {
+      fprintf (stderr, "SHR16: inputs are not short: %d %d\n", a, shift);
+   }
+   res = a>>shift;
+   if (!VERIFY_SHORT(res))
+      fprintf (stderr, "SHR16: output is not short: %d\n", res);
+   spx_mips++;
+   return res;
+}
+static inline short SHL16(int a, int shift) 
+{
+   int res;
+   if (!VERIFY_SHORT(a) || !VERIFY_SHORT(shift))
+   {
+      fprintf (stderr, "SHR16: inputs are not short: %d %d\n", a, shift);
+   }
+   res = a<<shift;
+   if (!VERIFY_SHORT(res))
+      fprintf (stderr, "SHR16: output is not short: %d\n", res);
+   spx_mips++;
+   return res;
+}
+
+static inline int SHR32(long long a, int shift) 
+{
+   long long  res;
+   if (!VERIFY_INT(a) || !VERIFY_SHORT(shift))
+   {
+      fprintf (stderr, "SHR32: inputs are not int: %d %d\n", (int)a, shift);
+   }
+   res = a>>shift;
+   if (!VERIFY_INT(res))
+      fprintf (stderr, "SHR32: output is not int: %d\n", (int)res);
+   spx_mips++;
+   return res;
+}
+static inline int SHL32(long long a, int shift) 
+{
+   long long  res;
+   if (!VERIFY_INT(a) || !VERIFY_SHORT(shift))
+   {
+      fprintf (stderr, "SHR32: inputs are not int: %d %d\n", (int)a, shift);
+   }
+   res = a<<shift;
+   if (!VERIFY_INT(res))
+      fprintf (stderr, "SHR32: output is not int: %d\n", (int)res);
+   spx_mips++;
+   return res;
+}
+
+
+#define PSHR16(a,shift) (SHR16(ADD16(a,(1<<((shift)-1))),shift))
+#define PSHR32(a,shift) (SHR32(ADD32(a,(1<<((shift)-1))),shift))
+#define SATURATE16(x,a) (((x)>(a) ? (a) : (x)<-(a) ? -(a) : (x)))
+#define SATURATE32(x,a) (((x)>(a) ? (a) : (x)<-(a) ? -(a) : (x)))
+
+#define SHR(a,shift) ((a) >> (shift))
+#define SHL(a,shift) ((a) << (shift))
+
+static inline short ADD16(int a, int b) 
+{
+   int res;
+   if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
+   {
+      fprintf (stderr, "ADD16: inputs are not short: %d %d\n", a, b);
+   }
+   res = a+b;
+   if (!VERIFY_SHORT(res))
+      fprintf (stderr, "ADD16: output is not short: %d+%d=%d\n", a,b,res);
+   spx_mips++;
+   return res;
+}
+static inline short SUB16(int a, int b) 
+{
+   int res;
+   if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
+   {
+      fprintf (stderr, "SUB16: inputs are not short: %d %d\n", a, b);
+   }
+   res = a-b;
+   if (!VERIFY_SHORT(res))
+      fprintf (stderr, "SUB16: output is not short: %d\n", res);
+   spx_mips++;
+   return res;
+}
+
+static inline int ADD32(long long a, long long b) 
+{
+   long long res;
+   if (!VERIFY_INT(a) || !VERIFY_INT(b))
+   {
+      fprintf (stderr, "ADD32: inputs are not int: %d %d\n", (int)a, (int)b);
+   }
+   res = a+b;
+   if (!VERIFY_INT(res))
+   {
+      fprintf (stderr, "ADD32: output is not int: %d\n", (int)res);
+   }
+   spx_mips++;
+   return res;
+}
+
+static inline int SUB32(long long a, long long b) 
+{
+   long long res;
+   if (!VERIFY_INT(a) || !VERIFY_INT(b))
+   {
+      fprintf (stderr, "SUB32: inputs are not int: %d %d\n", (int)a, (int)b);
+   }
+   res = a-b;
+   if (!VERIFY_INT(res))
+      fprintf (stderr, "SUB32: output is not int: %d\n", (int)res);
+   spx_mips++;
+   return res;
+}
+
+#define ADD64(a,b) (MIPS_INC(a)+(b))
+
+#define PSHR(a,shift) (SHR((a)+(1<<((shift)-1)),shift))
+
+/* result fits in 16 bits */
+static inline short MULT16_16_16(int a, int b) 
+{
+   int res;
+   if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
+   {
+      fprintf (stderr, "MULT16_16_16: inputs are not short: %d %d\n", a, b);
+   }
+   res = a*b;
+   if (!VERIFY_SHORT(res))
+      fprintf (stderr, "MULT16_16_16: output is not short: %d\n", res);
+   spx_mips++;
+   return res;
+}
+
+static inline int MULT16_16(int a, int b) 
+{
+   long long res;
+   if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
+   {
+      fprintf (stderr, "MULT16_16: inputs are not short: %d %d\n", a, b);
+   }
+   res = ((long long)a)*b;
+   if (!VERIFY_INT(res))
+      fprintf (stderr, "MULT16_16: output is not int: %d\n", (int)res);
+   spx_mips++;
+   return res;
+}
+
+#define MAC16_16(c,a,b)     (spx_mips--,ADD32((c),MULT16_16((a),(b))))
+#define MAC16_16_Q11(c,a,b)     (ADD16((c),EXTRACT16(SHR32(MULT16_16((a),(b)),11))))
+#define MAC16_16_Q13(c,a,b)     (ADD16((c),EXTRACT16(SHR32(MULT16_16((a),(b)),13))))
+#define MAC16_16_P13(c,a,b)     (ADD32((c),SHR(ADD32(4096,MULT16_16((a),(b))),13)))
+
+
+static inline int MULT16_32_QX(int a, long long b, int Q)
+{
+   long long res;
+   if (!VERIFY_SHORT(a) || !VERIFY_INT(b))
+   {
+      fprintf (stderr, "MULT16_32_Q%d: inputs are not short+int: %d %d\n", Q, (int)a, (int)b);
+   }
+   res = (((long long)a)*(long long)b) >> Q;
+   if (!VERIFY_INT(res))
+      fprintf (stderr, "MULT16_32_Q%d: output is not int: %d*%d=%d\n", Q, (int)a, (int)b,(int)res);
+   spx_mips+=5;
+   return res;
+}
+
+
+#define MULT16_32_Q11(a,b) MULT16_32_QX(a,b,11)
+#define MAC16_32_Q11(c,a,b) ADD32((c),MULT16_32_Q11((a),(b)))
+#define MULT16_32_Q12(a,b) MULT16_32_QX(a,b,12)
+#define MULT16_32_Q13(a,b) MULT16_32_QX(a,b,13)
+#define MULT16_32_Q14(a,b) MULT16_32_QX(a,b,14)
+#define MULT16_32_Q15(a,b) MULT16_32_QX(a,b,15)
+#define MAC16_32_Q15(c,a,b) ADD32((c),MULT16_32_Q15((a),(b)))
+
+static inline int SATURATE(int a, int b)
+{
+   if (a>b)
+      a=b;
+   if (a<-b)
+      a = -b;
+   return a;
+}
+
+static inline int MULT16_16_Q11_32(int a, int b) 
+{
+   long long res;
+   if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
+   {
+      fprintf (stderr, "MULT16_16_Q11: inputs are not short: %d %d\n", a, b);
+   }
+   res = ((long long)a)*b;
+   res >>= 11;
+   if (!VERIFY_INT(res))
+      fprintf (stderr, "MULT16_16_Q11: output is not short: %d*%d=%d\n", (int)a, (int)b, (int)res);
+   spx_mips+=3;
+   return res;
+}
+static inline short MULT16_16_Q13(int a, int b) 
+{
+   long long res;
+   if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
+   {
+      fprintf (stderr, "MULT16_16_Q13: inputs are not short: %d %d\n", a, b);
+   }
+   res = ((long long)a)*b;
+   res >>= 13;
+   if (!VERIFY_SHORT(res))
+      fprintf (stderr, "MULT16_16_Q13: output is not short: %d*%d=%d\n", a, b, (int)res);
+   spx_mips+=3;
+   return res;
+}
+static inline short MULT16_16_Q14(int a, int b) 
+{
+   long long res;
+   if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
+   {
+      fprintf (stderr, "MULT16_16_Q14: inputs are not short: %d %d\n", a, b);
+   }
+   res = ((long long)a)*b;
+   res >>= 14;
+   if (!VERIFY_SHORT(res))
+      fprintf (stderr, "MULT16_16_Q14: output is not short: %d\n", (int)res);
+   spx_mips+=3;
+   return res;
+}
+static inline short MULT16_16_Q15(int a, int b) 
+{
+   long long res;
+   if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
+   {
+      fprintf (stderr, "MULT16_16_Q15: inputs are not short: %d %d\n", a, b);
+   }
+   res = ((long long)a)*b;
+   res >>= 15;
+   if (!VERIFY_SHORT(res))
+      fprintf (stderr, "MULT16_16_Q15: output is not short: %d\n", (int)res);
+   spx_mips+=3;
+   return res;
+}
+
+static inline short MULT16_16_P13(int a, int b) 
+{
+   long long res;
+   if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
+   {
+      fprintf (stderr, "MULT16_16_P13: inputs are not short: %d %d\n", a, b);
+   }
+   res = ((long long)a)*b;
+   res += 4096;
+   if (!VERIFY_INT(res))
+      fprintf (stderr, "MULT16_16_P13: overflow: %d*%d=%d\n", a, b, (int)res);
+   res >>= 13;
+   if (!VERIFY_SHORT(res))
+      fprintf (stderr, "MULT16_16_P13: output is not short: %d*%d=%d\n", a, b, (int)res);
+   spx_mips+=4;
+   return res;
+}
+static inline short MULT16_16_P14(int a, int b) 
+{
+   long long res;
+   if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
+   {
+      fprintf (stderr, "MULT16_16_P14: inputs are not short: %d %d\n", a, b);
+   }
+   res = ((long long)a)*b;
+   res += 8192;
+   if (!VERIFY_INT(res))
+      fprintf (stderr, "MULT16_16_P14: overflow: %d*%d=%d\n", a, b, (int)res);
+   res >>= 14;
+   if (!VERIFY_SHORT(res))
+      fprintf (stderr, "MULT16_16_P14: output is not short: %d*%d=%d\n", a, b, (int)res);
+   spx_mips+=4;
+   return res;
+}
+static inline short MULT16_16_P15(int a, int b) 
+{
+   long long res;
+   if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
+   {
+      fprintf (stderr, "MULT16_16_P15: inputs are not short: %d %d\n", a, b);
+   }
+   res = ((long long)a)*b;
+   res += 16384;
+   if (!VERIFY_INT(res))
+      fprintf (stderr, "MULT16_16_P15: overflow: %d*%d=%d\n", a, b, (int)res);
+   res >>= 15;
+   if (!VERIFY_SHORT(res))
+      fprintf (stderr, "MULT16_16_P15: output is not short: %d*%d=%d\n", a, b, (int)res);
+   spx_mips+=4;
+   return res;
+}
+
+
+static inline int DIV32_16(long long a, long long b) 
+{
+   long long res;
+   if (b==0)
+   {
+      fprintf(stderr, "DIV32_16: divide by zero: %d/%d\n", (int)a, (int)b);
+      return 0;
+   }
+   if (!VERIFY_INT(a) || !VERIFY_SHORT(b))
+   {
+      fprintf (stderr, "DIV32_16: inputs are not int/short: %d %d\n", (int)a, (int)b);
+   }
+   res = a/b;
+   if (!VERIFY_SHORT(res))
+   {
+      fprintf (stderr, "DIV32_16: output is not short: %d / %d = %d\n", (int)a,(int)b,(int)res);
+      if (res>32767)
+         res = 32767;
+      if (res<-32768)
+         res = -32768;
+   }
+   spx_mips+=20;
+   return res;
+}
+static inline int DIV32(long long a, long long b) 
+{
+   long long res;
+   if (b==0)
+   {
+      fprintf(stderr, "DIV32: divide by zero: %d/%d\n", (int)a, (int)b);
+      return 0;
+   }
+
+   if (!VERIFY_INT(a) || !VERIFY_INT(b))
+   {
+      fprintf (stderr, "DIV32: inputs are not int/short: %d %d\n", (int)a, (int)b);
+   }
+   res = a/b;
+   if (!VERIFY_INT(res))
+      fprintf (stderr, "DIV32: output is not int: %d\n", (int)res);
+   spx_mips+=36;
+   return res;
+}
+#define PDIV32(a,b) DIV32(ADD32((a),(b)>>1),b)
+#define PDIV32_16(a,b) DIV32_16(ADD32((a),(b)>>1),b)
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/fixed_generic.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/fixed_generic.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,104 @@
+/* Copyright (C) 2003 Jean-Marc Valin */
+/**
+   @file fixed_generic.h
+   @brief Generic fixed-point operations
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef FIXED_GENERIC_H
+#define FIXED_GENERIC_H
+
+#define QCONST16(x,bits) ((spx_word16_t)(.5+(x)*(((spx_word32_t)1)<<(bits))))
+#define QCONST32(x,bits) ((spx_word32_t)(.5+(x)*(((spx_word32_t)1)<<(bits))))
+
+#define NEG16(x) (-(x))
+#define NEG32(x) (-(x))
+#define EXTRACT16(x) ((spx_word16_t)(x))
+#define EXTEND32(x) ((spx_word32_t)(x))
+#define SHR16(a,shift) ((a) >> (shift))
+#define SHL16(a,shift) ((a) << (shift))
+#define SHR32(a,shift) ((a) >> (shift))
+#define SHL32(a,shift) ((a) << (shift))
+#define PSHR16(a,shift) (SHR16((a)+(1<<((shift)-1)),shift))
+#define PSHR32(a,shift) (SHR32((a)+(1<<((shift)-1)),shift))
+#define SATURATE16(x,a) (((x)>(a) ? (a) : (x)<-(a) ? -(a) : (x)))
+#define SATURATE32(x,a) (((x)>(a) ? (a) : (x)<-(a) ? -(a) : (x)))
+
+#define SHR(a,shift) ((a) >> (shift))
+#define SHL(a,shift) ((spx_word32_t)(a) << (shift))
+#define PSHR(a,shift) (SHR((a)+(1<<((shift)-1)),shift))
+#define SATURATE(x,a) (((x)>(a) ? (a) : (x)<-(a) ? -(a) : (x)))
+
+
+#define ADD16(a,b) ((spx_word16_t)((spx_word16_t)(a)+(spx_word16_t)(b)))
+#define SUB16(a,b) ((spx_word16_t)(a)-(spx_word16_t)(b))
+#define ADD32(a,b) ((spx_word32_t)(a)+(spx_word32_t)(b))
+#define SUB32(a,b) ((spx_word32_t)(a)-(spx_word32_t)(b))
+
+
+/* result fits in 16 bits */
+#define MULT16_16_16(a,b)     ((((spx_word16_t)(a))*((spx_word16_t)(b))))
+
+/* (spx_word32_t)(spx_word16_t) gives TI compiler a hint that it's 16x16->32 multiply */
+#define MULT16_16(a,b)     (((spx_word32_t)(spx_word16_t)(a))*((spx_word32_t)(spx_word16_t)(b)))
+
+#define MAC16_16(c,a,b) (ADD32((c),MULT16_16((a),(b))))
+#define MULT16_32_Q12(a,b) ADD32(MULT16_16((a),SHR((b),12)), SHR(MULT16_16((a),((b)&0x00000fff)),12))
+#define MULT16_32_Q13(a,b) ADD32(MULT16_16((a),SHR((b),13)), SHR(MULT16_16((a),((b)&0x00001fff)),13))
+#define MULT16_32_Q14(a,b) ADD32(MULT16_16((a),SHR((b),14)), SHR(MULT16_16((a),((b)&0x00003fff)),14))
+
+#define MULT16_32_Q11(a,b) ADD32(MULT16_16((a),SHR((b),11)), SHR(MULT16_16((a),((b)&0x000007ff)),11))
+#define MAC16_32_Q11(c,a,b) ADD32(c,ADD32(MULT16_16((a),SHR((b),11)), SHR(MULT16_16((a),((b)&0x000007ff)),11)))
+
+#define MULT16_32_Q15(a,b) ADD32(MULT16_16((a),SHR((b),15)), SHR(MULT16_16((a),((b)&0x00007fff)),15))
+#define MAC16_32_Q15(c,a,b) ADD32(c,ADD32(MULT16_16((a),SHR((b),15)), SHR(MULT16_16((a),((b)&0x00007fff)),15)))
+
+
+#define MAC16_16_Q11(c,a,b)     (ADD32((c),SHR(MULT16_16((a),(b)),11)))
+#define MAC16_16_Q13(c,a,b)     (ADD32((c),SHR(MULT16_16((a),(b)),13)))
+#define MAC16_16_P13(c,a,b)     (ADD32((c),SHR(ADD32(4096,MULT16_16((a),(b))),13)))
+
+#define MULT16_16_Q11_32(a,b) (SHR(MULT16_16((a),(b)),11))
+#define MULT16_16_Q13(a,b) (SHR(MULT16_16((a),(b)),13))
+#define MULT16_16_Q14(a,b) (SHR(MULT16_16((a),(b)),14))
+#define MULT16_16_Q15(a,b) (SHR(MULT16_16((a),(b)),15))
+
+#define MULT16_16_P13(a,b) (SHR(ADD32(4096,MULT16_16((a),(b))),13))
+#define MULT16_16_P14(a,b) (SHR(ADD32(8192,MULT16_16((a),(b))),14))
+#define MULT16_16_P15(a,b) (SHR(ADD32(16384,MULT16_16((a),(b))),15))
+
+#define MUL_16_32_R15(a,bh,bl) ADD32(MULT16_16((a),(bh)), SHR(MULT16_16((a),(bl)),15))
+
+#define DIV32_16(a,b) ((spx_word16_t)(((spx_word32_t)(a))/((spx_word16_t)(b))))
+#define PDIV32_16(a,b) ((spx_word16_t)(((spx_word32_t)(a)+((spx_word16_t)(b)>>1))/((spx_word16_t)(b))))
+#define DIV32(a,b) (((spx_word32_t)(a))/((spx_word32_t)(b)))
+#define PDIV32(a,b) (((spx_word32_t)(a)+((spx_word16_t)(b)>>1))/((spx_word32_t)(b)))
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/gain_table.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/gain_table.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,160 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: gain_table.c
+   Codebook for 3-tap pitch prediction gain (128 entries)
+  
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are
+   met:
+
+   1. Redistributions of source code must retain the above copyright notice,
+   this list of conditions and the following disclaimer.  
+
+   2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   3. The name of the author may not be used to endorse or promote products
+   derived from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+   DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+   ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+*/
+
+const signed char gain_cdbk_nb[512] = {
+-32, -32, -32, 0,
+-28, -67, -5, 33,
+-42, -6, -32, 18,
+-57, -10, -54, 35,
+-16, 27, -41, 42,
+19, -19, -40, 36,
+-45, 24, -21, 40,
+-8, -14, -18, 28,
+1, 14, -58, 53,
+-18, -88, -39, 39,
+-38, 21, -18, 37,
+-19, 20, -43, 38,
+10, 17, -48, 54,
+-52, -58, -13, 33,
+-44, -1, -11, 32,
+-12, -11, -34, 22,
+14, 0, -46, 46,
+-37, -35, -34, 5,
+-25, 44, -30, 43,
+6, -4, -63, 49,
+-31, 43, -41, 43,
+-23, 30, -43, 41,
+-43, 26, -14, 44,
+-33, 1, -13, 27,
+-13, 18, -37, 37,
+-46, -73, -45, 34,
+-36, 24, -25, 34,
+-36, -11, -20, 19,
+-25, 12, -18, 33,
+-36, -69, -59, 34,
+-45, 6, 8, 46,
+-22, -14, -24, 18,
+-1, 13, -44, 44,
+-39, -48, -26, 15,
+-32, 31, -37, 34,
+-33, 15, -46, 31,
+-24, 30, -36, 37,
+-41, 31, -23, 41,
+-50, 22, -4, 50,
+-22, 2, -21, 28,
+-17, 30, -34, 40,
+-7, -60, -28, 29,
+-38, 42, -28, 42,
+-44, -11, 21, 43,
+-16, 8, -44, 34,
+-39, -55, -43, 21,
+-11, -35, 26, 41,
+-9, 0, -34, 29,
+-8, 121, -81, 113,
+7, -16, -22, 33,
+-37, 33, -31, 36,
+-27, -7, -36, 17,
+-34, 70, -57, 65,
+-37, -11, -48, 21,
+-40, 17, -1, 44,
+-33, 6, -6, 33,
+-9, 0, -20, 34,
+-21, 69, -33, 57,
+-29, 33, -31, 35,
+-55, 12, -1, 49,
+-33, 27, -22, 35,
+-50, -33, -47, 17,
+-50, 54, 51, 94,
+-1, -5, -44, 35,
+-4, 22, -40, 45,
+-39, -66, -25, 24,
+-33, 1, -26, 20,
+-24, -23, -25, 12,
+-11, 21, -45, 44,
+-25, -45, -19, 17,
+-43, 105, -16, 82,
+5, -21, 1, 41,
+-16, 11, -33, 30,
+-13, -99, -4, 57,
+-37, 33, -15, 44,
+-25, 37, -63, 54,
+-36, 24, -31, 31,
+-53, -56, -38, 26,
+-41, -4, 4, 37,
+-33, 13, -30, 24,
+49, 52, -94, 114,
+-5, -30, -15, 23,
+1, 38, -40, 56,
+-23, 12, -36, 29,
+-17, 40, -47, 51,
+-37, -41, -39, 11,
+-49, 34, 0, 58,
+-18, -7, -4, 34,
+-16, 17, -27, 35,
+30, 5, -62, 65,
+4, 48, -68, 76,
+-43, 11, -11, 38,
+-18, 19, -15, 41,
+-23, -62, -39, 23,
+-42, 10, -2, 41,
+-21, -13, -13, 25,
+-9, 13, -47, 42,
+-23, -62, -24, 24,
+-44, 60, -21, 58,
+-18, -3, -52, 32,
+-22, 22, -36, 34,
+-75, 57, 16, 90,
+-19, 3, 10, 45,
+-29, 23, -38, 32,
+-5, -62, -51, 38,
+-51, 40, -18, 53,
+-42, 13, -24, 32,
+-34, 14, -20, 30,
+-56, -75, -26, 37,
+-26, 32, 15, 59,
+-26, 17, -29, 29,
+-7, 28, -52, 53,
+-12, -30, 5, 30,
+-5, -48, -5, 35,
+2, 2, -43, 40,
+21, 16, 16, 75,
+-25, -45, -32, 10,
+-43, 18, -10, 42,
+9, 0, -1, 52,
+-1, 7, -30, 36,
+19, -48, -4, 48,
+-28, 25, -29, 32,
+-22, 0, -31, 22,
+-32, 17, -10, 36,
+-64, -41, -62, 36,
+-52, 15, 16, 58,
+-30, -22, -32, 6,
+-7, 9, -38, 36};

Added: freeswitch/trunk/libs/speex/libspeex/gain_table_lbr.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/gain_table_lbr.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,64 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: gain_table_lbr.c
+   Codebook for 3-tap pitch prediction gain (32 entries)
+  
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are
+   met:
+
+   1. Redistributions of source code must retain the above copyright notice,
+   this list of conditions and the following disclaimer.  
+
+   2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   3. The name of the author may not be used to endorse or promote products
+   derived from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+   DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+   ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+*/
+
+const signed char gain_cdbk_lbr[128] = {
+-32, -32, -32, 0,
+-31, -58, -16, 22,
+-41, -24, -43, 14,
+-56, -22, -55, 29,
+-13, 33, -41, 47,
+-4, -39, -9, 29,
+-41, 15, -12, 38,
+-8, -15, -12, 31,
+1, 2, -44, 40,
+-22, -66, -42, 27,
+-38, 28, -23, 38,
+-21, 14, -37, 31,
+0, 21, -50, 52,
+-53, -71, -27, 33,
+-37, -1, -19, 25,
+-19, -5, -28, 22,
+6, 65, -44, 74,
+-33, -48, -33, 9,
+-40, 57, -14, 58,
+-17, 4, -45, 32,
+-31, 38, -33, 36,
+-23, 28, -40, 39,
+-43, 29, -12, 46,
+-34, 13, -23, 28,
+-16, 15, -27, 34,
+-14, -82, -15, 43,
+-31, 25, -32, 29,
+-21, 5, -5, 38,
+-47, -63, -51, 33,
+-46, 12, 3, 47,
+-28, -17, -29, 11,
+-10, 14, -40, 38};

Added: freeswitch/trunk/libs/speex/libspeex/hexc_10_32_table.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/hexc_10_32_table.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,66 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: hexc_10_32_table.c
+   Codebook for high-band excitation in SB-CELP mode (4000 bps)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+const signed char hexc_10_32_table[320] = {
+-3, -2, -1, 0, -4, 5, 35, -40, -9, 13, 
+-44, 5, -27, -1, -7, 6, -11, 7, -8, 7, 
+19, -14, 15, -4, 9, -10, 10, -8, 10, -9, 
+-1, 1, 0, 0, 2, 5, -18, 22, -53, 50, 
+1, -23, 50, -36, 15, 3, -13, 14, -10, 6, 
+1, 5, -3, 4, -2, 5, -32, 25, 5, -2, 
+-1, -4, 1, 11, -29, 26, -6, -15, 30, -18, 
+0, 15, -17, 40, -41, 3, 9, -2, -2, 3, 
+-3, -1, -5, 2, 21, -6, -16, -21, 23, 2, 
+60, 15, 16, -16, -9, 14, 9, -1, 7, -9, 
+0, 1, 1, 0, -1, -6, 17, -28, 54, -45, 
+-1, 1, -1, -6, -6, 2, 11, 26, -29, -2, 
+46, -21, 34, 12, -23, 32, -23, 16, -10, 3, 
+66, 19, -20, 24, 7, 11, -3, 0, -3, -1, 
+-50, -46, 2, -18, -3, 4, -1, -2, 3, -3, 
+-19, 41, -36, 9, 11, -24, 21, -16, 9, -3, 
+-25, -3, 10, 18, -9, -2, -5, -1, -5, 6, 
+-4, -3, 2, -26, 21, -19, 35, -15, 7, -13, 
+17, -19, 39, -43, 48, -31, 16, -9, 7, -2, 
+-5, 3, -4, 9, -19, 27, -55, 63, -35, 10, 
+26, -44, -2, 9, 4, 1, -6, 8, -9, 5, 
+-8, -1, -3, -16, 45, -42, 5, 15, -16, 10, 
+0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 
+-16, 24, -55, 47, -38, 27, -19, 7, -3, 1, 
+16, 27, 20, -19, 18, 5, -7, 1, -5, 2, 
+-6, 8, -22, 0, -3, -3, 8, -1, 7, -8, 
+1, -3, 5, 0, 17, -48, 58, -52, 29, -7, 
+-2, 3, -10, 6, -26, 58, -31, 1, -6, 3, 
+93, -29, 39, 3, 17, 5, 6, -1, -1, -1, 
+27, 13, 10, 19, -7, -34, 12, 10, -4, 9, 
+-76, 9, 8, -28, -2, -11, 2, -1, 3, 1, 
+-83, 38, -39, 4, -16, -6, -2, -5, 5, -2, 
+};

Added: freeswitch/trunk/libs/speex/libspeex/hexc_table.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/hexc_table.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,162 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: hexc_table.c
+   Codebook for high-band excitation in SB-CELP mode (8000 bps with sign)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+const signed char hexc_table[1024] = {
+-24, 21, -20, 5, -5, -7, 14, -10, 
+2, -27, 16, -20, 0, -32, 26, 19, 
+8, -11, -41, 31, 28, -27, -32, 34, 
+42, 34, -17, 22, -10, 13, -29, 18, 
+-12, -26, -24, 11, 22, 5, -5, -5, 
+54, -68, -43, 57, -25, 24, 4, 4, 
+26, -8, -12, -17, 54, 30, -45, 1, 
+10, -15, 18, -41, 11, 68, -67, 37, 
+-16, -24, -16, 38, -22, 6, -29, 30, 
+66, -27, 5, 7, -16, 13, 2, -12, 
+-7, -3, -20, 36, 4, -28, 9, 3, 
+32, 48, 26, 39, 3, 0, 7, -21, 
+-13, 5, -82, -7, 73, -20, 34, -9, 
+-5, 1, -1, 10, -5, -10, -1, 9, 
+1, -9, 10, 0, -14, 11, -1, -2, 
+-1, 11, 20, 96, -81, -22, -12, -9, 
+-58, 9, 24, -30, 26, -35, 27, -12, 
+13, -18, 56, -59, 15, -7, 23, -15, 
+-1, 6, -25, 14, -22, -20, 47, -11, 
+16, 2, 38, -23, -19, -30, -9, 40, 
+-11, 5, 4, -6, 8, 26, -21, -11, 
+127, 4, 1, 6, -9, 2, -7, -2, 
+-3, 7, -5, 10, -19, 7, -106, 91, 
+-3, 9, -4, 21, -8, 26, -80, 8, 
+1, -2, -10, -17, -17, -27, 32, 71, 
+6, -29, 11, -23, 54, -38, 29, -22, 
+39, 87, -31, -12, -20, 3, -2, -2, 
+2, 20, 0, -1, -35, 27, 9, -6, 
+-12, 3, -12, -6, 13, 1, 14, -22, 
+-59, -15, -17, -25, 13, -7, 7, 3, 
+0, 1, -7, 6, -3, 61, -37, -23, 
+-23, -29, 38, -31, 27, 1, -8, 2, 
+-27, 23, -26, 36, -34, 5, 24, -24, 
+-6, 7, 3, -59, 78, -62, 44, -16, 
+1, 6, 0, 17, 8, 45, 0, -110, 
+6, 14, -2, 32, -77, -56, 62, -3, 
+3, -13, 4, -16, 102, -15, -36, -1, 
+9, -113, 6, 23, 0, 9, 9, 5, 
+-8, -1, -14, 5, -12, 121, -53, -27, 
+-8, -9, 22, -13, 3, 2, -3, 1, 
+-2, -71, 95, 38, -19, 15, -16, -5, 
+71, 10, 2, -32, -13, -5, 15, -1, 
+-2, -14, -85, 30, 29, 6, 3, 2, 
+0, 0, 0, 0, 0, 0, 0, 0, 
+2, -65, -56, -9, 18, 18, 23, -14, 
+-2, 0, 12, -29, 26, -12, 1, 2, 
+-12, -64, 90, -6, 4, 1, 5, -5, 
+-110, -3, -31, 22, -29, 9, 0, 8, 
+-40, -5, 21, -5, -5, 13, 10, -18, 
+40, 1, 35, -20, 30, -28, 11, -6, 
+19, 7, 14, 18, -64, 9, -6, 16, 
+51, 68, 8, 16, 12, -8, 0, -9, 
+20, -22, 25, 7, -4, -13, 41, -35, 
+93, -18, -54, 11, -1, 1, -9, 4, 
+-66, 66, -31, 20, -22, 25, -23, 11, 
+10, 9, 19, 15, 11, -5, -31, -10, 
+-23, -28, -6, -6, -3, -4, 5, 3, 
+-28, 22, -11, -42, 25, -25, -16, 41, 
+34, 47, -6, 2, 42, -19, -22, 5, 
+-39, 32, 6, -35, 22, 17, -30, 8, 
+-26, -11, -11, 3, -12, 33, 33, -37, 
+21, -1, 6, -4, 3, 0, -5, 5, 
+12, -12, 57, 27, -61, -3, 20, -17, 
+2, 0, 4, 0, -2, -33, -58, 81, 
+-23, 39, -10, -5, 2, 6, -7, 5, 
+4, -3, -2, -13, -23, -72, 107, 15, 
+-5, 0, -7, -3, -6, 5, -4, 15, 
+47, 12, -31, 25, -16, 8, 22, -25, 
+-62, -56, -18, 14, 28, 12, 2, -11, 
+74, -66, 41, -20, -7, 16, -20, 16, 
+-8, 0, -16, 4, -19, 92, 12, -59, 
+-14, -39, 49, -25, -16, 23, -27, 19, 
+-3, -33, 19, 85, -29, 6, -7, -10, 
+16, -7, -12, 1, -6, 2, 4, -2, 
+64, 10, -25, 41, -2, -31, 15, 0, 
+110, 50, 69, 35, 28, 19, -10, 2, 
+-43, -49, -56, -15, -16, 10, 3, 12, 
+-1, -8, 1, 26, -12, -1, 7, -11, 
+-27, 41, 25, 1, -11, -18, 22, -7, 
+-1, -47, -8, 23, -3, -17, -7, 18, 
+-125, 59, -5, 3, 18, 1, 2, 3, 
+27, -35, 65, -53, 50, -46, 37, -21, 
+-28, 7, 14, -37, -5, -5, 12, 5, 
+-8, 78, -19, 21, -6, -16, 8, -7, 
+5, 2, 7, 2, 10, -6, 12, -60, 
+44, 11, -36, -32, 31, 0, 2, -2, 
+2, 1, -3, 7, -10, 17, -21, 10, 
+6, -2, 19, -2, 59, -38, -86, 38, 
+8, -41, -30, -45, -33, 7, 15, 28, 
+29, -7, 24, -40, 7, 7, 5, -2, 
+9, 24, -23, -18, 6, -29, 30, 2, 
+28, 49, -11, -46, 10, 43, -13, -9, 
+-1, -3, -7, -7, -17, -6, 97, -33, 
+-21, 3, 5, 1, 12, -43, -8, 28, 
+7, -43, -7, 17, -20, 19, -1, 2, 
+-13, 9, 54, 34, 9, -28, -11, -9, 
+-17, 110, -59, 44, -26, 0, 3, -12, 
+-47, 73, -34, -43, 38, -33, 16, -5, 
+-46, -4, -6, -2, -25, 19, -29, 28, 
+-13, 5, 14, 27, -40, -43, 4, 32, 
+-13, -2, -35, -4, 112, -42, 9, -12, 
+37, -28, 17, 14, -19, 35, -39, 23, 
+3, -14, -1, -57, -5, 94, -9, 3, 
+-39, 5, 30, -10, -32, 42, -13, -14, 
+-97, -63, 30, -9, 1, -7, 12, 5, 
+20, 17, -9, -36, -30, 25, 47, -9, 
+-15, 12, -22, 98, -8, -50, 15, -27, 
+21, -16, -11, 2, 12, -10, 10, -3, 
+33, 36, -96, 0, -17, 31, -9, 9, 
+3, -20, 13, -11, 8, -4, 10, -10, 
+9, 1, 112, -70, -27, 5, -21, 2, 
+-57, -3, -29, 10, 19, -21, 21, -10, 
+-66, -3, 91, -35, 30, -12, 0, -7, 
+59, -28, 26, 2, 14, -18, 1, 1, 
+11, 17, 20, -54, -59, 27, 4, 29, 
+32, 5, 19, 12, -4, 1, 7, -10, 
+5, -2, 10, 0, 23, -5, 28, -104, 
+46, 11, 16, 3, 29, 1, -8, -14, 
+1, 7, -50, 88, -62, 26, 8, -17, 
+-14, 50, 0, 32, -12, -3, -27, 18, 
+-8, -5, 8, 3, -20, -11, 37, -12, 
+9, 33, 46, -101, -1, -4, 1, 6, 
+-1, 28, -42, -15, 16, 5, -1, -2, 
+-55, 85, 38, -9, -4, 11, -2, -9, 
+-6, 3, -20, -10, -77, 89, 24, -3, 
+-104, -57, -26, -31, -20, -6, -9, 14, 
+20, -23, 46, -15, -31, 28, 1, -15, 
+-2, 6, -2, 31, 45, -76, 23, -25, 
+};

Added: freeswitch/trunk/libs/speex/libspeex/high_lsp_tables.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/high_lsp_tables.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,163 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: high_lsp_tables.c
+   Codebooks for high-band LSPs in SB-CELP mode
+  
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are
+   met:
+
+   1. Redistributions of source code must retain the above copyright notice,
+   this list of conditions and the following disclaimer.  
+
+   2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   3. The name of the author may not be used to endorse or promote products
+   derived from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+   DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+   ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+*/
+ 
+const signed char high_lsp_cdbk[512]={
+39,12,-14,-20,-29,-61,-67,-76,
+-32,-71,-67,68,77,46,34,5,
+-13,-48,-46,-72,-81,-84,-60,-58,
+-40,-28,82,93,68,45,29,3,
+-19,-47,-28,-43,-35,-30,-8,-13,
+-39,-91,-91,-123,-96,10,10,-6,
+-18,-55,-60,-91,-56,-36,-27,-16,
+-48,-75,40,28,-10,-28,35,9,
+37,19,1,-20,-31,-41,-18,-25,
+-35,-68,-80,45,27,-1,47,13,
+0,-29,-35,-57,-50,-79,-73,-38,
+-19,5,35,14,-10,-23,16,-8,
+5,-24,-40,-62,-23,-27,-22,-16,
+-18,-46,-72,-77,43,21,33,1,
+-80,-70,-70,-64,-56,-52,-39,-33,
+-31,-38,-19,-19,-15,32,33,-2,
+7,-15,-15,-24,-23,-33,-41,-56,
+-24,-57,5,89,64,41,27,5,
+-9,-47,-60,-97,-97,-124,-20,-9,
+-44,-73,31,29,-4,64,48,7,
+-35,-57,0,-3,-26,-47,-3,-6,
+-40,-76,-79,-48,12,81,55,10,
+9,-24,-43,-73,-57,-69,16,5,
+-28,-53,18,29,20,0,-4,-11,
+6,-13,23,7,-17,-35,-37,-37,
+-30,-68,-63,6,24,-9,-14,3,
+21,-13,-27,-57,-49,-80,-24,-41,
+-5,-16,-5,1,45,25,12,-7,
+3,-15,-6,-16,-15,-8,6,-13,
+-42,-81,-80,-87,14,1,-10,-3,
+-43,-69,-46,-24,-28,-29,36,6,
+-43,-56,-12,12,54,79,43,9,
+54,22,2,8,-12,-43,-46,-52,
+-38,-69,-89,-5,75,38,33,5,
+-13,-53,-62,-87,-89,-113,-99,-55,
+-34,-37,62,55,33,16,21,-2,
+-17,-46,-29,-38,-38,-48,-39,-42,
+-36,-75,-72,-88,-48,-30,21,2,
+-15,-57,-64,-98,-84,-76,25,1,
+-46,-80,-12,18,-7,3,34,6,
+38,31,23,4,-1,20,14,-15,
+-43,-78,-91,-24,14,-3,54,16,
+0,-27,-28,-44,-56,-83,-92,-89,
+-3,34,56,41,36,22,20,-8,
+-7,-35,-42,-62,-49,3,12,-10,
+-50,-87,-96,-66,92,70,38,9,
+-70,-71,-62,-42,-39,-43,-11,-7,
+-50,-79,-58,-50,-31,32,31,-6,
+-4,-25,7,-17,-38,-70,-58,-27,
+-43,-83,-28,59,36,20,31,2,
+-27,-71,-80,-109,-98,-75,-33,-32,
+-31,-2,33,15,-6,43,33,-5,
+0,-22,-10,-27,-34,-49,-11,-20,
+-41,-91,-100,-121,-39,57,41,10,
+-19,-50,-38,-59,-60,-70,-18,-20,
+-8,-31,-8,-15,1,-14,-26,-25,
+33,21,32,17,1,-19,-19,-26,
+-58,-81,-35,-22,45,30,11,-11,
+3,-26,-48,-87,-67,-83,-58,3,
+-1,-26,-20,44,10,25,39,5,
+-9,-35,-27,-38,7,10,4,-9,
+-42,-85,-102,-127,52,44,28,10,
+-47,-61,-40,-39,-17,-1,-10,-33,
+-42,-74,-48,21,-4,70,52,10};
+
+
+const signed char high_lsp_cdbk2[512]={
+-36,-62,6,-9,-10,-14,-56,23,
+1,-26,23,-48,-17,12,8,-7,
+23,29,-36,-28,-6,-29,-17,-5,
+40,23,10,10,-46,-13,36,6,
+4,-30,-29,62,32,-32,-1,22,
+-14,1,-4,-22,-45,2,54,4,
+-30,-57,-59,-12,27,-3,-31,8,
+-9,5,10,-14,32,66,19,9,
+2,-25,-37,23,-15,18,-38,-31,
+5,-9,-21,15,0,22,62,30,
+15,-12,-14,-46,77,21,33,3,
+34,29,-19,50,2,11,9,-38,
+-12,-37,62,1,-15,54,32,6,
+2,-24,20,35,-21,2,19,24,
+-13,55,4,9,39,-19,30,-1,
+-21,73,54,33,8,18,3,15,
+6,-19,-47,6,-3,-48,-50,1,
+26,20,8,-23,-50,65,-14,-55,
+-17,-31,-37,-28,53,-1,-17,-53,
+1,57,11,-8,-25,-30,-37,64,
+5,-52,-45,15,23,31,15,14,
+-25,24,33,-2,-44,-56,-18,6,
+-21,-43,4,-12,17,-37,20,-10,
+34,15,2,15,55,21,-11,-31,
+-6,46,25,16,-9,-25,-8,-62,
+28,17,20,-32,-29,26,30,25,
+-19,2,-16,-17,26,-51,2,50,
+42,19,-66,23,29,-2,3,19,
+-19,-37,32,15,6,30,-34,13,
+11,-5,40,31,10,-42,4,-9,
+26,-9,-70,17,-2,-23,20,-22,
+-55,51,-24,-31,22,-22,15,-13,
+3,-10,-28,-16,56,4,-63,11,
+-18,-15,-18,-38,-35,16,-7,34,
+-1,-21,-49,-47,9,-37,7,8,
+69,55,20,6,-33,-45,-10,-9,
+6,-9,12,71,15,-3,-42,-7,
+-24,32,-35,-2,-42,-17,-5,0,
+-2,-33,-54,13,-12,-34,47,23,
+19,55,7,-8,74,31,14,16,
+-23,-26,19,12,-18,-49,-28,-31,
+-20,2,-14,-20,-47,78,40,13,
+-23,-11,21,-6,18,1,47,5,
+38,35,32,46,22,8,13,16,
+-14,18,51,19,40,39,11,-26,
+-1,-17,47,2,-53,-15,31,-22,
+38,21,-15,-16,5,-33,53,15,
+-38,86,11,-3,-24,49,13,-4,
+-11,-18,28,20,-12,-27,-26,35,
+-25,-35,-3,-20,-61,30,10,-55,
+-12,-22,-52,-54,-14,19,-32,-12,
+45,15,-8,-48,-9,11,-32,8,
+-16,-34,-13,51,18,38,-2,-32,
+-17,22,-2,-18,-28,-70,59,27,
+-28,-19,-10,-20,-9,-9,-8,-21,
+21,-8,35,-2,45,-3,-9,12,
+0,30,7,-39,43,27,-38,-91,
+30,26,19,-55,-4,63,14,-17,
+13,9,13,2,7,4,6,61,
+72,-1,-17,29,-1,-22,-17,8,
+-28,-37,63,44,41,3,2,14,
+9,-6,75,-8,-7,-12,-15,-12,
+13,9,-4,30,-22,-65,15,0,
+-45,4,-4,1,5,22,11,23};

Added: freeswitch/trunk/libs/speex/libspeex/jitter.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/jitter.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,508 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: speex_jitter.h
+
+   Adaptive jitter buffer for Speex
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+
+#include "misc.h"
+#include <speex/speex.h>
+#include <speex/speex_bits.h>
+#include <speex/speex_jitter.h>
+#include <stdio.h>
+
+#define LATE_BINS 10
+#define MAX_MARGIN 30                     /**< Number of bins in margin histogram */
+
+#define SPEEX_JITTER_MAX_BUFFER_SIZE 200   /**< Maximum number of packets in jitter buffer */
+
+
+
+#define GT32(a,b) (((spx_int32_t)((a)-(b)))>0)
+#define GE32(a,b) (((spx_int32_t)((a)-(b)))>=0)
+#define LT32(a,b) (((spx_int32_t)((a)-(b)))<0)
+#define LE32(a,b) (((spx_int32_t)((a)-(b)))<=0)
+
+/** Jitter buffer structure */
+struct JitterBuffer_ {
+   spx_uint32_t pointer_timestamp;                                        /**< Timestamp of what we will *get* next */
+   spx_uint32_t current_timestamp;                                        /**< Timestamp of the local clock (what we will *play* next) */
+
+   char *buf[SPEEX_JITTER_MAX_BUFFER_SIZE];                               /**< Buffer of packets (NULL if slot is free) */
+   spx_uint32_t timestamp[SPEEX_JITTER_MAX_BUFFER_SIZE];                  /**< Timestamp of packet                 */
+   int span[SPEEX_JITTER_MAX_BUFFER_SIZE];                                /**< Timestamp of packet                 */
+   int len[SPEEX_JITTER_MAX_BUFFER_SIZE];                                 /**< Number of bytes in packet           */
+
+   int tick_size;                                                         /**< Output granularity                  */
+   int reset_state;                                                       /**< True if state was just reset        */
+   int buffer_margin;                                                     /**< How many frames we want to keep in the buffer (lower bound) */
+   
+   int lost_count;                                                        /**< Number of consecutive lost packets  */
+   float shortterm_margin[MAX_MARGIN];                                    /**< Short term margin histogram         */
+   float longterm_margin[MAX_MARGIN];                                     /**< Long term margin histogram          */
+   float loss_rate;                                                       /**< Average loss rate                   */
+};
+
+/** Initialise jitter buffer */
+JitterBuffer *jitter_buffer_init(int tick)
+{
+   JitterBuffer *jitter = (JitterBuffer*)speex_alloc(sizeof(JitterBuffer));
+   if (jitter)
+   {
+      int i;
+      for (i=0;i<SPEEX_JITTER_MAX_BUFFER_SIZE;i++)
+         jitter->buf[i]=NULL;
+      jitter->tick_size = tick;
+      jitter->buffer_margin = 1;
+      jitter_buffer_reset(jitter);
+   }
+   return jitter;
+}
+
+/** Reset jitter buffer */
+void jitter_buffer_reset(JitterBuffer *jitter)
+{
+   int i;
+   for (i=0;i<SPEEX_JITTER_MAX_BUFFER_SIZE;i++)
+   {
+      if (jitter->buf[i])
+      {
+         speex_free(jitter->buf[i]);
+         jitter->buf[i] = NULL;
+      }
+   }
+   /* Timestamp is actually undefined at this point */
+   jitter->pointer_timestamp = 0;
+   jitter->current_timestamp = 0;
+   jitter->reset_state = 1;
+   jitter->lost_count = 0;
+   jitter->loss_rate = 0;
+   for (i=0;i<MAX_MARGIN;i++)
+   {
+      jitter->shortterm_margin[i] = 0;
+      jitter->longterm_margin[i] = 0;
+   }
+   /*fprintf (stderr, "reset\n");*/
+}
+
+/** Destroy jitter buffer */
+void jitter_buffer_destroy(JitterBuffer *jitter)
+{
+   jitter_buffer_reset(jitter);
+   speex_free(jitter);
+}
+
+/** Put one packet into the jitter buffer */
+void jitter_buffer_put(JitterBuffer *jitter, const JitterBufferPacket *packet)
+{
+   int i,j;
+   spx_int32_t arrival_margin;
+   /*fprintf (stderr, "put packet %d %d\n", timestamp, span);*/
+   if (jitter->reset_state)
+   {
+      jitter->reset_state=0;
+      jitter->pointer_timestamp = packet->timestamp;
+      jitter->current_timestamp = packet->timestamp;
+      /*fprintf(stderr, "reset to %d\n", timestamp);*/
+   }
+   
+   /* Cleanup buffer (remove old packets that weren't played) */
+   for (i=0;i<SPEEX_JITTER_MAX_BUFFER_SIZE;i++)
+   {
+      if (jitter->buf[i] && LE32(jitter->timestamp[i] + jitter->span[i], jitter->pointer_timestamp))
+      {
+         /*fprintf (stderr, "cleaned (not played)\n");*/
+         speex_free(jitter->buf[i]);
+         jitter->buf[i] = NULL;
+      }
+   }
+
+   /*Find an empty slot in the buffer*/
+   for (i=0;i<SPEEX_JITTER_MAX_BUFFER_SIZE;i++)
+   {
+      if (jitter->buf[i]==NULL)
+         break;
+   }
+
+   /*fprintf(stderr, "%d %d %f\n", timestamp, jitter->pointer_timestamp, jitter->drift_average);*/
+   /*No place left in the buffer*/
+   if (i==SPEEX_JITTER_MAX_BUFFER_SIZE)
+   {
+      int earliest=jitter->timestamp[0];
+      i=0;
+      for (j=1;j<SPEEX_JITTER_MAX_BUFFER_SIZE;j++)
+      {
+         if (!jitter->buf[i] || LT32(jitter->timestamp[j],earliest))
+         {
+            earliest = jitter->timestamp[j];
+            i=j;
+         }
+      }
+      speex_free(jitter->buf[i]);
+      jitter->buf[i]=NULL;
+      if (jitter->lost_count>20)
+      {
+         jitter_buffer_reset(jitter);
+      }
+      /*fprintf (stderr, "Buffer is full, discarding earliest frame %d (currently at %d)\n", timestamp, jitter->pointer_timestamp);*/      
+   }
+   
+   /* Copy packet in buffer */
+   jitter->buf[i]=(char*)speex_alloc(packet->len);
+   for (j=0;j<packet->len;j++)
+      jitter->buf[i][j]=packet->data[j];
+   jitter->timestamp[i]=packet->timestamp;
+   jitter->span[i]=packet->span;
+   jitter->len[i]=packet->len;
+   
+   /* Adjust the buffer size depending on network conditions */
+   arrival_margin = (packet->timestamp - jitter->current_timestamp) - jitter->buffer_margin*jitter->tick_size;
+   
+   if (arrival_margin >= -LATE_BINS*jitter->tick_size)
+   {
+      spx_int32_t int_margin;
+      for (i=0;i<MAX_MARGIN;i++)
+      {
+         jitter->shortterm_margin[i] *= .98;
+         jitter->longterm_margin[i] *= .995;
+      }
+      int_margin = LATE_BINS + arrival_margin/jitter->tick_size;
+      if (int_margin>MAX_MARGIN-1)
+         int_margin = MAX_MARGIN-1;
+      if (int_margin>=0)
+      {
+         jitter->shortterm_margin[int_margin] += .02;
+         jitter->longterm_margin[int_margin] += .005;
+      }
+   } else {
+      
+      /*fprintf (stderr, "way too late = %d\n", arrival_margin);*/
+      if (jitter->lost_count>20)
+      {
+         jitter_buffer_reset(jitter);
+      }
+   }
+#if 0 /* Enable to check how much is being buffered */
+   if (rand()%1000==0)
+   {
+      int count = 0;
+      for (j=0;j<SPEEX_JITTER_MAX_BUFFER_SIZE;j++)
+      {
+         if (jitter->buf[j])
+            count++;
+      }
+      fprintf (stderr, "buffer_size = %d\n", count);
+   }
+#endif
+}
+
+/** Get one packet from the jitter buffer */
+int jitter_buffer_get(JitterBuffer *jitter, JitterBufferPacket *packet, spx_uint32_t *start_offset)
+{
+   int i, j;
+   float late_ratio_short;
+   float late_ratio_long;
+   float ontime_ratio_short;
+   float ontime_ratio_long;
+   float early_ratio_short;
+   float early_ratio_long;
+   int chunk_size;
+   int incomplete = 0;
+   
+   if (LT32(jitter->current_timestamp+jitter->tick_size, jitter->pointer_timestamp))
+   {
+      jitter->current_timestamp = jitter->pointer_timestamp;
+      speex_warning("did you forget to call jitter_buffer_tick() by any chance?");
+   }
+   /*fprintf (stderr, "get packet %d %d\n", jitter->pointer_timestamp, jitter->current_timestamp);*/
+
+   /* FIXME: This should be only what remaining of the current tick */
+   chunk_size = jitter->tick_size;
+   
+   /* Compiling arrival statistics */
+   
+   late_ratio_short = 0;
+   late_ratio_long = 0;
+   for (i=0;i<LATE_BINS;i++)
+   {
+      late_ratio_short += jitter->shortterm_margin[i];
+      late_ratio_long += jitter->longterm_margin[i];
+   }
+   ontime_ratio_short = jitter->shortterm_margin[LATE_BINS];
+   ontime_ratio_long = jitter->longterm_margin[LATE_BINS];
+   early_ratio_short = early_ratio_long = 0;
+   for (i=LATE_BINS+1;i<MAX_MARGIN;i++)
+   {
+      early_ratio_short += jitter->shortterm_margin[i];
+      early_ratio_long += jitter->longterm_margin[i];
+   }
+   if (0&&jitter->pointer_timestamp%1000==0)
+   {
+      /*fprintf (stderr, "%f %f %f %f %f %f\n", early_ratio_short, early_ratio_long, ontime_ratio_short, ontime_ratio_long, late_ratio_short, late_ratio_long);*/
+      /*fprintf (stderr, "%f %f\n", early_ratio_short + ontime_ratio_short + late_ratio_short, early_ratio_long + ontime_ratio_long + late_ratio_long);*/
+   }
+   
+   /* Adjusting the buffering */
+   
+   if (late_ratio_short > .1 || late_ratio_long > .03)
+   {
+      /* If too many packets are arriving late */
+      jitter->shortterm_margin[MAX_MARGIN-1] += jitter->shortterm_margin[MAX_MARGIN-2];
+      jitter->longterm_margin[MAX_MARGIN-1] += jitter->longterm_margin[MAX_MARGIN-2];
+      for (i=MAX_MARGIN-3;i>=0;i--)
+      {
+         jitter->shortterm_margin[i+1] = jitter->shortterm_margin[i];
+         jitter->longterm_margin[i+1] = jitter->longterm_margin[i];         
+      }
+      jitter->shortterm_margin[0] = 0;
+      jitter->longterm_margin[0] = 0;            
+      jitter->pointer_timestamp -= jitter->tick_size;
+      jitter->current_timestamp -= jitter->tick_size;
+      /*fprintf (stderr, "i");*/
+      /*fprintf (stderr, "interpolate (getting some slack)\n");*/
+   } else if (late_ratio_short + ontime_ratio_short < .005 && late_ratio_long + ontime_ratio_long < .01 && early_ratio_short > .8)
+   {
+      /* Many frames arriving early */
+      jitter->shortterm_margin[0] += jitter->shortterm_margin[1];
+      jitter->longterm_margin[0] += jitter->longterm_margin[1];
+      for (i=1;i<MAX_MARGIN-1;i++)
+      {
+         jitter->shortterm_margin[i] = jitter->shortterm_margin[i+1];
+         jitter->longterm_margin[i] = jitter->longterm_margin[i+1];         
+      }
+      jitter->shortterm_margin[MAX_MARGIN-1] = 0;
+      jitter->longterm_margin[MAX_MARGIN-1] = 0;      
+      /*fprintf (stderr, "drop frame\n");*/
+      /*fprintf (stderr, "d");*/
+      jitter->pointer_timestamp += jitter->tick_size;
+      jitter->current_timestamp += jitter->tick_size;
+      /*fprintf (stderr, "dropping packet (getting more aggressive)\n");*/
+   }
+   
+   /* Searching for the packet that fits best */
+   
+   /* Search the buffer for a packet with the right timestamp and spanning the whole current chunk */
+   for (i=0;i<SPEEX_JITTER_MAX_BUFFER_SIZE;i++)
+   {
+      if (jitter->buf[i] && jitter->timestamp[i]==jitter->pointer_timestamp && GE32(jitter->timestamp[i]+jitter->span[i],jitter->pointer_timestamp+chunk_size))
+         break;
+   }
+   
+   /* If no match, try for an "older" packet that still spans (fully) the current chunk */
+   if (i==SPEEX_JITTER_MAX_BUFFER_SIZE)
+   {
+      for (i=0;i<SPEEX_JITTER_MAX_BUFFER_SIZE;i++)
+      {
+         if (jitter->buf[i] && jitter->timestamp[i]<=jitter->pointer_timestamp && GE32(jitter->timestamp[i]+jitter->span[i],jitter->pointer_timestamp+chunk_size))
+            break;
+      }
+   }
+   
+   /* If still no match, try for an "older" packet that spans part of the current chunk */
+   if (i==SPEEX_JITTER_MAX_BUFFER_SIZE)
+   {
+      for (i=0;i<SPEEX_JITTER_MAX_BUFFER_SIZE;i++)
+      {
+         if (jitter->buf[i] && jitter->timestamp[i]<=jitter->pointer_timestamp && GT32(jitter->timestamp[i]+jitter->span[i],jitter->pointer_timestamp))
+            break;
+      }
+   }
+   
+   /* If still no match, try for earliest packet possible */
+   if (i==SPEEX_JITTER_MAX_BUFFER_SIZE)
+   {
+      int found = 0;
+      spx_uint32_t best_time=0;
+      int best_span=0;
+      int besti=0;
+      for (i=0;i<SPEEX_JITTER_MAX_BUFFER_SIZE;i++)
+      {
+         /* check if packet starts within current chunk */
+         if (jitter->buf[i] && LT32(jitter->timestamp[i],jitter->pointer_timestamp+chunk_size) && GE32(jitter->timestamp[i],jitter->pointer_timestamp))
+         {
+            if (!found || LT32(jitter->timestamp[i],best_time) || (jitter->timestamp[i]==best_time && GT32(jitter->span[i],best_span)))
+            {
+               best_time = jitter->timestamp[i];
+               best_span = jitter->span[i];
+               besti = i;
+               found = 1;
+            }
+         }
+      }
+      if (found)
+      {
+         i=besti;
+         incomplete = 1;
+         /*fprintf (stderr, "incomplete: %d %d %d %d\n", jitter->timestamp[i], jitter->pointer_timestamp, chunk_size, jitter->span[i]);*/
+      }
+   }
+
+   /* If we find something */
+   if (i!=SPEEX_JITTER_MAX_BUFFER_SIZE)
+   {
+      /* We (obviously) haven't lost this packet */
+      jitter->lost_count = 0;
+      jitter->loss_rate = .999*jitter->loss_rate;
+      /* Check for potential overflow */
+      packet->len = jitter->len[i];
+      /* Copy packet */
+      for (j=0;j<packet->len;j++)
+         packet->data[j] = jitter->buf[i][j];
+      /* Remove packet */
+      speex_free(jitter->buf[i]);
+      jitter->buf[i] = NULL;
+      /* Set timestamp and span (if requested) */
+      if (start_offset)
+         *start_offset = jitter->timestamp[i]-jitter->pointer_timestamp;
+      packet->timestamp = jitter->timestamp[i];
+      packet->span = jitter->span[i];
+      /* Point at the end of the current packet */
+      jitter->pointer_timestamp = jitter->timestamp[i]+jitter->span[i];
+      if (incomplete)
+         return JITTER_BUFFER_INCOMPLETE;
+      else
+         return JITTER_BUFFER_OK;
+   }
+   
+   
+   /* If we haven't found anything worth returning */
+   /*fprintf (stderr, "not found\n");*/
+   jitter->lost_count++;
+   /*fprintf (stderr, "m");*/
+   /*fprintf (stderr, "lost_count = %d\n", jitter->lost_count);*/
+   jitter->loss_rate = .999*jitter->loss_rate + .001;
+   if (start_offset)
+      *start_offset = 0;
+   packet->timestamp = jitter->pointer_timestamp;
+   packet->span = jitter->tick_size;
+   jitter->pointer_timestamp += chunk_size;
+   packet->len = 0;
+   return JITTER_BUFFER_MISSING;
+
+}
+
+/** Get pointer timestamp of jitter buffer */
+int jitter_buffer_get_pointer_timestamp(JitterBuffer *jitter)
+{
+   return jitter->pointer_timestamp;
+}
+
+void jitter_buffer_tick(JitterBuffer *jitter)
+{
+   jitter->current_timestamp += jitter->tick_size;
+}
+
+
+
+
+
+void speex_jitter_init(SpeexJitter *jitter, void *decoder, int sampling_rate)
+{
+   jitter->dec = decoder;
+   speex_decoder_ctl(decoder, SPEEX_GET_FRAME_SIZE, &jitter->frame_size);
+
+   jitter->packets = jitter_buffer_init(jitter->frame_size);
+
+   speex_bits_init(&jitter->current_packet);
+   jitter->valid_bits = 0;
+
+}
+
+void speex_jitter_destroy(SpeexJitter *jitter)
+{
+   jitter_buffer_destroy(jitter->packets);
+   speex_bits_destroy(&jitter->current_packet);
+}
+
+void speex_jitter_put(SpeexJitter *jitter, char *packet, int len, int timestamp)
+{
+   JitterBufferPacket p;
+   p.data = packet;
+   p.len = len;
+   p.timestamp = timestamp;
+   p.span = jitter->frame_size;
+   jitter_buffer_put(jitter->packets, &p);
+}
+
+void speex_jitter_get(SpeexJitter *jitter, short *out, int *current_timestamp)
+{
+   int i;
+   int ret;
+   char data[2048];
+   JitterBufferPacket packet;
+   packet.data = data;
+   
+   if (jitter->valid_bits)
+   {
+      /* Try decoding last received packet */
+      ret = speex_decode_int(jitter->dec, &jitter->current_packet, out);
+      if (ret == 0)
+      {
+         jitter_buffer_tick(jitter->packets);
+         return;
+      } else {
+         jitter->valid_bits = 0;
+      }
+   }
+
+   ret = jitter_buffer_get(jitter->packets, &packet, NULL);
+   
+   if (ret != JITTER_BUFFER_OK)
+   {
+      /* No packet found */
+
+      /*fprintf (stderr, "lost/late frame\n");*/
+      /*Packet is late or lost*/
+      speex_decode_int(jitter->dec, NULL, out);
+   } else {
+      speex_bits_read_from(&jitter->current_packet, packet.data, packet.len);
+      /* Decode packet */
+      ret = speex_decode_int(jitter->dec, &jitter->current_packet, out);
+      if (ret == 0)
+      {
+         jitter->valid_bits = 1;
+      } else {
+         /* Error while decoding */
+         for (i=0;i<jitter->frame_size;i++)
+            out[i]=0;
+      }
+   }
+   jitter_buffer_tick(jitter->packets);
+}
+
+int speex_jitter_get_pointer_timestamp(SpeexJitter *jitter)
+{
+   return jitter_buffer_get_pointer_timestamp(jitter->packets);
+}

Added: freeswitch/trunk/libs/speex/libspeex/kiss_fft.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/kiss_fft.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,430 @@
+/*
+Copyright (c) 2003-2004, Mark Borgerding
+
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
+    * Neither the author nor the names of any contributors may be used to endorse or promote products derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "_kiss_fft_guts.h"
+#include "misc.h"
+
+/* The guts header contains all the multiplication and addition macros that are defined for
+ fixed or floating point complex numbers.  It also delares the kf_ internal functions.
+ */
+
+static kiss_fft_cpx *scratchbuf=NULL;
+static size_t nscratchbuf=0;
+static kiss_fft_cpx *tmpbuf=NULL;
+static size_t ntmpbuf=0;
+
+#define CHECKBUF(buf,nbuf,n) \
+    do { \
+        if ( nbuf < (size_t)(n) ) {\
+            speex_free(buf); \
+            buf = (kiss_fft_cpx*)KISS_FFT_MALLOC(sizeof(kiss_fft_cpx)*(n)); \
+            nbuf = (size_t)(n); \
+        } \
+   }while(0)
+        
+static void kf_bfly2(
+        kiss_fft_cpx * Fout,
+        const size_t fstride,
+        const kiss_fft_cfg st,
+        int m
+        )
+{
+    kiss_fft_cpx * Fout2;
+    kiss_fft_cpx * tw1 = st->twiddles;
+    kiss_fft_cpx t;
+    Fout2 = Fout + m;
+    if (!st->inverse) {
+       int i;
+       kiss_fft_cpx *x=Fout;
+       for (i=0;i<2*m;i++)
+       {
+          x[i].r = SHR(x[i].r,1);
+          x[i].i = SHR(x[i].i,1);
+       }
+    }
+
+    do{
+        C_MUL (t,  *Fout2 , *tw1);
+        tw1 += fstride;
+        C_SUB( *Fout2 ,  *Fout , t );
+        C_ADDTO( *Fout ,  t );
+        ++Fout2;
+        ++Fout;
+    }while (--m);
+}
+
+static void kf_bfly4(
+        kiss_fft_cpx * Fout,
+        const size_t fstride,
+        const kiss_fft_cfg st,
+        const size_t m
+        )
+{
+    kiss_fft_cpx *tw1,*tw2,*tw3;
+    kiss_fft_cpx scratch[6];
+    size_t k=m;
+    const size_t m2=2*m;
+    const size_t m3=3*m;
+
+    tw3 = tw2 = tw1 = st->twiddles;
+
+    if (!st->inverse) {
+       int i;
+       kiss_fft_cpx *x=Fout;
+       for (i=0;i<4*m;i++)
+       {
+          x[i].r = PSHR16(x[i].r,2);
+          x[i].i = PSHR16(x[i].i,2);
+       }
+    }
+    if (st->inverse)
+    {
+       do {
+          C_MUL(scratch[0],Fout[m] , *tw1 );
+          C_MUL(scratch[1],Fout[m2] , *tw2 );
+          C_MUL(scratch[2],Fout[m3] , *tw3 );
+          
+          C_SUB( scratch[5] , *Fout, scratch[1] );
+          C_ADDTO(*Fout, scratch[1]);
+          C_ADD( scratch[3] , scratch[0] , scratch[2] );
+          C_SUB( scratch[4] , scratch[0] , scratch[2] );
+          C_SUB( Fout[m2], *Fout, scratch[3] );
+          tw1 += fstride;
+          tw2 += fstride*2;
+          tw3 += fstride*3;
+          C_ADDTO( *Fout , scratch[3] );
+
+          Fout[m].r = scratch[5].r - scratch[4].i;
+          Fout[m].i = scratch[5].i + scratch[4].r;
+          Fout[m3].r = scratch[5].r + scratch[4].i;
+          Fout[m3].i = scratch[5].i - scratch[4].r;
+          ++Fout;
+       } while(--k);
+    } else
+    {
+       do {
+          C_MUL(scratch[0],Fout[m] , *tw1 );
+          C_MUL(scratch[1],Fout[m2] , *tw2 );
+          C_MUL(scratch[2],Fout[m3] , *tw3 );
+          
+          C_SUB( scratch[5] , *Fout, scratch[1] );
+          C_ADDTO(*Fout, scratch[1]);
+          C_ADD( scratch[3] , scratch[0] , scratch[2] );
+          C_SUB( scratch[4] , scratch[0] , scratch[2] );
+          C_SUB( Fout[m2], *Fout, scratch[3] );
+          tw1 += fstride;
+          tw2 += fstride*2;
+          tw3 += fstride*3;
+          C_ADDTO( *Fout , scratch[3] );
+          
+          Fout[m].r = scratch[5].r + scratch[4].i;
+          Fout[m].i = scratch[5].i - scratch[4].r;
+          Fout[m3].r = scratch[5].r - scratch[4].i;
+          Fout[m3].i = scratch[5].i + scratch[4].r;
+          ++Fout;
+       }while(--k);
+    }
+}
+
+static void kf_bfly3(
+         kiss_fft_cpx * Fout,
+         const size_t fstride,
+         const kiss_fft_cfg st,
+         size_t m
+         )
+{
+     size_t k=m;
+     const size_t m2 = 2*m;
+     kiss_fft_cpx *tw1,*tw2;
+     kiss_fft_cpx scratch[5];
+     kiss_fft_cpx epi3;
+     epi3 = st->twiddles[fstride*m];
+
+     tw1=tw2=st->twiddles;
+
+     do{
+        if (!st->inverse) {
+         C_FIXDIV(*Fout,3); C_FIXDIV(Fout[m],3); C_FIXDIV(Fout[m2],3);
+	}
+
+         C_MUL(scratch[1],Fout[m] , *tw1);
+         C_MUL(scratch[2],Fout[m2] , *tw2);
+
+         C_ADD(scratch[3],scratch[1],scratch[2]);
+         C_SUB(scratch[0],scratch[1],scratch[2]);
+         tw1 += fstride;
+         tw2 += fstride*2;
+
+         Fout[m].r = Fout->r - HALF_OF(scratch[3].r);
+         Fout[m].i = Fout->i - HALF_OF(scratch[3].i);
+
+         C_MULBYSCALAR( scratch[0] , epi3.i );
+
+         C_ADDTO(*Fout,scratch[3]);
+
+         Fout[m2].r = Fout[m].r + scratch[0].i;
+         Fout[m2].i = Fout[m].i - scratch[0].r;
+
+         Fout[m].r -= scratch[0].i;
+         Fout[m].i += scratch[0].r;
+
+         ++Fout;
+     }while(--k);
+}
+
+static void kf_bfly5(
+        kiss_fft_cpx * Fout,
+        const size_t fstride,
+        const kiss_fft_cfg st,
+        int m
+        )
+{
+    kiss_fft_cpx *Fout0,*Fout1,*Fout2,*Fout3,*Fout4;
+    int u;
+    kiss_fft_cpx scratch[13];
+    kiss_fft_cpx * twiddles = st->twiddles;
+    kiss_fft_cpx *tw;
+    kiss_fft_cpx ya,yb;
+    ya = twiddles[fstride*m];
+    yb = twiddles[fstride*2*m];
+
+    Fout0=Fout;
+    Fout1=Fout0+m;
+    Fout2=Fout0+2*m;
+    Fout3=Fout0+3*m;
+    Fout4=Fout0+4*m;
+
+    tw=st->twiddles;
+    for ( u=0; u<m; ++u ) {
+        if (!st->inverse) {
+        C_FIXDIV( *Fout0,5); C_FIXDIV( *Fout1,5); C_FIXDIV( *Fout2,5); C_FIXDIV( *Fout3,5); C_FIXDIV( *Fout4,5);
+	}
+        scratch[0] = *Fout0;
+
+        C_MUL(scratch[1] ,*Fout1, tw[u*fstride]);
+        C_MUL(scratch[2] ,*Fout2, tw[2*u*fstride]);
+        C_MUL(scratch[3] ,*Fout3, tw[3*u*fstride]);
+        C_MUL(scratch[4] ,*Fout4, tw[4*u*fstride]);
+
+        C_ADD( scratch[7],scratch[1],scratch[4]);
+        C_SUB( scratch[10],scratch[1],scratch[4]);
+        C_ADD( scratch[8],scratch[2],scratch[3]);
+        C_SUB( scratch[9],scratch[2],scratch[3]);
+
+        Fout0->r += scratch[7].r + scratch[8].r;
+        Fout0->i += scratch[7].i + scratch[8].i;
+
+        scratch[5].r = scratch[0].r + S_MUL(scratch[7].r,ya.r) + S_MUL(scratch[8].r,yb.r);
+        scratch[5].i = scratch[0].i + S_MUL(scratch[7].i,ya.r) + S_MUL(scratch[8].i,yb.r);
+
+        scratch[6].r =  S_MUL(scratch[10].i,ya.i) + S_MUL(scratch[9].i,yb.i);
+        scratch[6].i = -S_MUL(scratch[10].r,ya.i) - S_MUL(scratch[9].r,yb.i);
+
+        C_SUB(*Fout1,scratch[5],scratch[6]);
+        C_ADD(*Fout4,scratch[5],scratch[6]);
+
+        scratch[11].r = scratch[0].r + S_MUL(scratch[7].r,yb.r) + S_MUL(scratch[8].r,ya.r);
+        scratch[11].i = scratch[0].i + S_MUL(scratch[7].i,yb.r) + S_MUL(scratch[8].i,ya.r);
+        scratch[12].r = - S_MUL(scratch[10].i,yb.i) + S_MUL(scratch[9].i,ya.i);
+        scratch[12].i = S_MUL(scratch[10].r,yb.i) - S_MUL(scratch[9].r,ya.i);
+
+        C_ADD(*Fout2,scratch[11],scratch[12]);
+        C_SUB(*Fout3,scratch[11],scratch[12]);
+
+        ++Fout0;++Fout1;++Fout2;++Fout3;++Fout4;
+    }
+}
+
+/* perform the butterfly for one stage of a mixed radix FFT */
+static void kf_bfly_generic(
+        kiss_fft_cpx * Fout,
+        const size_t fstride,
+        const kiss_fft_cfg st,
+        int m,
+        int p
+        )
+{
+    int u,k,q1,q;
+    kiss_fft_cpx * twiddles = st->twiddles;
+    kiss_fft_cpx t;
+    int Norig = st->nfft;
+
+    CHECKBUF(scratchbuf,nscratchbuf,p);
+
+    for ( u=0; u<m; ++u ) {
+        k=u;
+        for ( q1=0 ; q1<p ; ++q1 ) {
+            scratchbuf[q1] = Fout[ k  ];
+        if (!st->inverse) {
+            C_FIXDIV(scratchbuf[q1],p);
+	}
+            k += m;
+        }
+
+        k=u;
+        for ( q1=0 ; q1<p ; ++q1 ) {
+            int twidx=0;
+            Fout[ k ] = scratchbuf[0];
+            for (q=1;q<p;++q ) {
+                twidx += fstride * k;
+                if (twidx>=Norig) twidx-=Norig;
+                C_MUL(t,scratchbuf[q] , twiddles[twidx] );
+                C_ADDTO( Fout[ k ] ,t);
+            }
+            k += m;
+        }
+    }
+}
+
+static
+void kf_work(
+        kiss_fft_cpx * Fout,
+        const kiss_fft_cpx * f,
+        const size_t fstride,
+        int in_stride,
+        int * factors,
+        const kiss_fft_cfg st
+        )
+{
+    kiss_fft_cpx * Fout_beg=Fout;
+    const int p=*factors++; /* the radix  */
+    const int m=*factors++; /* stage's fft length/p */
+    const kiss_fft_cpx * Fout_end = Fout + p*m;
+
+    if (m==1) {
+        do{
+            *Fout = *f;
+            f += fstride*in_stride;
+        }while(++Fout != Fout_end );
+    }else{
+        do{
+            kf_work( Fout , f, fstride*p, in_stride, factors,st);
+            f += fstride*in_stride;
+        }while( (Fout += m) != Fout_end );
+    }
+
+    Fout=Fout_beg;
+
+    switch (p) {
+        case 2: kf_bfly2(Fout,fstride,st,m); break;
+        case 3: kf_bfly3(Fout,fstride,st,m); break; 
+        case 4: kf_bfly4(Fout,fstride,st,m); break;
+        case 5: kf_bfly5(Fout,fstride,st,m); break; 
+        default: kf_bfly_generic(Fout,fstride,st,m,p); break;
+    }
+}
+
+/*  facbuf is populated by p1,m1,p2,m2, ...
+    where 
+    p[i] * m[i] = m[i-1]
+    m0 = n                  */
+static 
+void kf_factor(int n,int * facbuf)
+{
+    int p=4;
+    double floor_sqrt;
+    floor_sqrt = floor( sqrt((double)n) );
+
+    /*factor out powers of 4, powers of 2, then any remaining primes */
+    do {
+        while (n % p) {
+            switch (p) {
+                case 4: p = 2; break;
+                case 2: p = 3; break;
+                default: p += 2; break;
+            }
+            if (p > floor_sqrt)
+                p = n;          /* no more factors, skip to end */
+        }
+        n /= p;
+        *facbuf++ = p;
+        *facbuf++ = n;
+    } while (n > 1);
+}
+
+/*
+ *
+ * User-callable function to allocate all necessary storage space for the fft.
+ *
+ * The return value is a contiguous block of memory, allocated with malloc.  As such,
+ * It can be freed with free(), rather than a kiss_fft-specific function.
+ * */
+kiss_fft_cfg kiss_fft_alloc(int nfft,int inverse_fft,void * mem,size_t * lenmem )
+{
+    kiss_fft_cfg st=NULL;
+    size_t memneeded = sizeof(struct kiss_fft_state)
+        + sizeof(kiss_fft_cpx)*(nfft-1); /* twiddle factors*/
+
+    if ( lenmem==NULL ) {
+        st = ( kiss_fft_cfg)KISS_FFT_MALLOC( memneeded );
+    }else{
+        if (mem != NULL && *lenmem >= memneeded)
+            st = (kiss_fft_cfg)mem;
+        *lenmem = memneeded;
+    }
+    if (st) {
+        int i;
+        st->nfft=nfft;
+        st->inverse = inverse_fft;
+
+        for (i=0;i<nfft;++i) {
+            const double pi=3.14159265358979323846264338327;
+            double phase = ( -2*pi /nfft ) * i;
+            if (st->inverse)
+                phase *= -1;
+            kf_cexp(st->twiddles+i, phase );
+        }
+
+        kf_factor(nfft,st->factors);
+    }
+    return st;
+}
+
+
+
+    
+void kiss_fft_stride(kiss_fft_cfg st,const kiss_fft_cpx *fin,kiss_fft_cpx *fout,int in_stride)
+{
+    if (fin == fout) {
+        CHECKBUF(tmpbuf,ntmpbuf,st->nfft);
+        kf_work(tmpbuf,fin,1,in_stride, st->factors,st);
+        speex_move(fout,tmpbuf,sizeof(kiss_fft_cpx)*st->nfft);
+    }else{
+        kf_work( fout, fin, 1,in_stride, st->factors,st );
+    }
+}
+
+void kiss_fft(kiss_fft_cfg cfg,const kiss_fft_cpx *fin,kiss_fft_cpx *fout)
+{
+    kiss_fft_stride(cfg,fin,fout,1);
+}
+
+
+/* not really necessary to call, but if someone is doing in-place ffts, they may want to free the 
+   buffers from CHECKBUF
+ */ 
+void kiss_fft_cleanup(void)
+{
+    speex_free(scratchbuf);
+    scratchbuf = NULL;
+    nscratchbuf=0;
+    speex_free(tmpbuf);
+    tmpbuf=NULL;
+    ntmpbuf=0;
+}

Added: freeswitch/trunk/libs/speex/libspeex/kiss_fft.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/kiss_fft.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,108 @@
+#ifndef KISS_FFT_H
+#define KISS_FFT_H
+
+#include <stdlib.h>
+#include <math.h>
+#include "misc.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ ATTENTION!
+ If you would like a :
+ -- a utility that will handle the caching of fft objects
+ -- real-only (no imaginary time component ) FFT
+ -- a multi-dimensional FFT
+ -- a command-line utility to perform ffts
+ -- a command-line utility to perform fast-convolution filtering
+
+ Then see kfc.h kiss_fftr.h kiss_fftnd.h fftutil.c kiss_fastfir.c
+  in the tools/ directory.
+*/
+
+#ifdef USE_SIMD
+# include <xmmintrin.h>
+# define kiss_fft_scalar __m128
+#define KISS_FFT_MALLOC(nbytes) memalign(16,nbytes)
+#else	
+#define KISS_FFT_MALLOC speex_alloc
+#endif	
+
+
+#ifdef FIXED_POINT
+#include "misc.h"	
+#  define kiss_fft_scalar spx_int16_t
+#else
+# ifndef kiss_fft_scalar
+/*  default is float */
+#   define kiss_fft_scalar float
+# endif
+#endif
+
+typedef struct {
+    kiss_fft_scalar r;
+    kiss_fft_scalar i;
+}kiss_fft_cpx;
+
+typedef struct kiss_fft_state* kiss_fft_cfg;
+
+/* 
+ *  kiss_fft_alloc
+ *  
+ *  Initialize a FFT (or IFFT) algorithm's cfg/state buffer.
+ *
+ *  typical usage:      kiss_fft_cfg mycfg=kiss_fft_alloc(1024,0,NULL,NULL);
+ *
+ *  The return value from fft_alloc is a cfg buffer used internally
+ *  by the fft routine or NULL.
+ *
+ *  If lenmem is NULL, then kiss_fft_alloc will allocate a cfg buffer using malloc.
+ *  The returned value should be free()d when done to avoid memory leaks.
+ *  
+ *  The state can be placed in a user supplied buffer 'mem':
+ *  If lenmem is not NULL and mem is not NULL and *lenmem is large enough,
+ *      then the function places the cfg in mem and the size used in *lenmem
+ *      and returns mem.
+ *  
+ *  If lenmem is not NULL and ( mem is NULL or *lenmem is not large enough),
+ *      then the function returns NULL and places the minimum cfg 
+ *      buffer size in *lenmem.
+ * */
+
+kiss_fft_cfg kiss_fft_alloc(int nfft,int inverse_fft,void * mem,size_t * lenmem); 
+
+/*
+ * kiss_fft(cfg,in_out_buf)
+ *
+ * Perform an FFT on a complex input buffer.
+ * for a forward FFT,
+ * fin should be  f[0] , f[1] , ... ,f[nfft-1]
+ * fout will be   F[0] , F[1] , ... ,F[nfft-1]
+ * Note that each element is complex and can be accessed like
+    f[k].r and f[k].i
+ * */
+void kiss_fft(kiss_fft_cfg cfg,const kiss_fft_cpx *fin,kiss_fft_cpx *fout);
+
+/*
+ A more generic version of the above function. It reads its input from every Nth sample.
+ * */
+void kiss_fft_stride(kiss_fft_cfg cfg,const kiss_fft_cpx *fin,kiss_fft_cpx *fout,int fin_stride);
+
+/* If kiss_fft_alloc allocated a buffer, it is one contiguous 
+   buffer and can be simply free()d when no longer needed*/
+#define kiss_fft_free speex_free
+
+/*
+ Cleans up some memory that gets managed internally. Not necessary to call, but it might clean up 
+ your compiler output to call this before you exit.
+*/
+void kiss_fft_cleanup(void);
+	
+
+#ifdef __cplusplus
+} 
+#endif
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/kiss_fftr.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/kiss_fftr.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,163 @@
+/*
+Copyright (c) 2003-2004, Mark Borgerding
+
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
+    * Neither the author nor the names of any contributors may be used to endorse or promote products derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "kiss_fftr.h"
+#include "_kiss_fft_guts.h"
+
+struct kiss_fftr_state{
+    kiss_fft_cfg substate;
+    kiss_fft_cpx * tmpbuf;
+    kiss_fft_cpx * super_twiddles;
+#ifdef USE_SIMD    
+    long pad;
+#endif    
+};
+
+kiss_fftr_cfg kiss_fftr_alloc(int nfft,int inverse_fft,void * mem,size_t * lenmem)
+{
+    int i;
+    kiss_fftr_cfg st = NULL;
+    size_t subsize, memneeded;
+
+    if (nfft & 1) {
+        speex_warning("Real FFT optimization must be even.\n");
+        return NULL;
+    }
+    nfft >>= 1;
+
+    kiss_fft_alloc (nfft, inverse_fft, NULL, &subsize);
+    memneeded = sizeof(struct kiss_fftr_state) + subsize + sizeof(kiss_fft_cpx) * ( nfft * 2);
+
+    if (lenmem == NULL) {
+        st = (kiss_fftr_cfg) KISS_FFT_MALLOC (memneeded);
+    } else {
+        if (*lenmem >= memneeded)
+            st = (kiss_fftr_cfg) mem;
+        *lenmem = memneeded;
+    }
+    if (!st)
+        return NULL;
+
+    st->substate = (kiss_fft_cfg) (st + 1); /*just beyond kiss_fftr_state struct */
+    st->tmpbuf = (kiss_fft_cpx *) (((char *) st->substate) + subsize);
+    st->super_twiddles = st->tmpbuf + nfft;
+    kiss_fft_alloc(nfft, inverse_fft, st->substate, &subsize);
+
+    for (i = 0; i < nfft; ++i) {
+        double phase =
+            -3.14159265358979323846264338327 * ((double) i / nfft + .5);
+        if (inverse_fft)
+            phase *= -1;
+        kf_cexp (st->super_twiddles+i,phase);
+    }
+    return st;
+}
+
+void kiss_fftr(kiss_fftr_cfg st,const kiss_fft_scalar *timedata,kiss_fft_cpx *freqdata)
+{
+    /* input buffer timedata is stored row-wise */
+    int k,ncfft;
+    kiss_fft_cpx fpnk,fpk,f1k,f2k,tw,tdc;
+
+    if ( st->substate->inverse) {
+        speex_warning("kiss fft usage error: improper alloc\n");
+        exit(1);
+    }
+
+    ncfft = st->substate->nfft;
+
+    /*perform the parallel fft of two real signals packed in real,imag*/
+    kiss_fft( st->substate , (const kiss_fft_cpx*)timedata, st->tmpbuf );
+    /* The real part of the DC element of the frequency spectrum in st->tmpbuf
+     * contains the sum of the even-numbered elements of the input time sequence
+     * The imag part is the sum of the odd-numbered elements
+     *
+     * The sum of tdc.r and tdc.i is the sum of the input time sequence. 
+     *      yielding DC of input time sequence
+     * The difference of tdc.r - tdc.i is the sum of the input (dot product) [1,-1,1,-1... 
+     *      yielding Nyquist bin of input time sequence
+     */
+ 
+    tdc.r = st->tmpbuf[0].r;
+    tdc.i = st->tmpbuf[0].i;
+    C_FIXDIV(tdc,2);
+    CHECK_OVERFLOW_OP(tdc.r ,+, tdc.i);
+    CHECK_OVERFLOW_OP(tdc.r ,-, tdc.i);
+    freqdata[0].r = tdc.r + tdc.i;
+    freqdata[ncfft].r = tdc.r - tdc.i;
+#ifdef USE_SIMD    
+    freqdata[ncfft].i = freqdata[0].i = _mm_set1_ps(0);
+#else
+    freqdata[ncfft].i = freqdata[0].i = 0;
+#endif
+
+    for ( k=1;k <= ncfft/2 ; ++k ) {
+        fpk    = st->tmpbuf[k]; 
+        fpnk.r =   st->tmpbuf[ncfft-k].r;
+        fpnk.i = - st->tmpbuf[ncfft-k].i;
+        C_FIXDIV(fpk,2);
+        C_FIXDIV(fpnk,2);
+
+        C_ADD( f1k, fpk , fpnk );
+        C_SUB( f2k, fpk , fpnk );
+        C_MUL( tw , f2k , st->super_twiddles[k]);
+
+        freqdata[k].r = HALF_OF(f1k.r + tw.r);
+        freqdata[k].i = HALF_OF(f1k.i + tw.i);
+        freqdata[ncfft-k].r = HALF_OF(f1k.r - tw.r);
+        freqdata[ncfft-k].i = HALF_OF(tw.i - f1k.i);
+    }
+}
+
+void kiss_fftri(kiss_fftr_cfg st,const kiss_fft_cpx *freqdata,kiss_fft_scalar *timedata)
+{
+    /* input buffer timedata is stored row-wise */
+    int k, ncfft;
+
+    if (st->substate->inverse == 0) {
+        speex_warning ("kiss fft usage error: improper alloc\n");
+        exit (1);
+    }
+
+    ncfft = st->substate->nfft;
+
+    st->tmpbuf[0].r = freqdata[0].r + freqdata[ncfft].r;
+    st->tmpbuf[0].i = freqdata[0].r - freqdata[ncfft].r;
+    /*C_FIXDIV(st->tmpbuf[0],2);*/
+
+    for (k = 1; k <= ncfft / 2; ++k) {
+        kiss_fft_cpx fk, fnkc, fek, fok, tmp;
+        fk = freqdata[k];
+        fnkc.r = freqdata[ncfft - k].r;
+        fnkc.i = -freqdata[ncfft - k].i;
+        /*C_FIXDIV( fk , 2 );
+        C_FIXDIV( fnkc , 2 );*/
+
+        C_ADD (fek, fk, fnkc);
+        C_SUB (tmp, fk, fnkc);
+        C_MUL (fok, tmp, st->super_twiddles[k]);
+        C_ADD (st->tmpbuf[k],     fek, fok);
+        C_SUB (st->tmpbuf[ncfft - k], fek, fok);
+#ifdef USE_SIMD        
+        st->tmpbuf[ncfft - k].i *= _mm_set1_ps(-1.0);
+#else
+        st->tmpbuf[ncfft - k].i *= -1;
+#endif
+    }
+    kiss_fft (st->substate, st->tmpbuf, (kiss_fft_cpx *) timedata);
+}

Added: freeswitch/trunk/libs/speex/libspeex/kiss_fftr.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/kiss_fftr.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,46 @@
+#ifndef KISS_FTR_H
+#define KISS_FTR_H
+
+#include "kiss_fft.h"
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+    
+/* 
+ 
+ Real optimized version can save about 45% cpu time vs. complex fft of a real seq.
+
+ 
+ 
+ */
+
+typedef struct kiss_fftr_state *kiss_fftr_cfg;
+
+
+kiss_fftr_cfg kiss_fftr_alloc(int nfft,int inverse_fft,void * mem, size_t * lenmem);
+/*
+ nfft must be even
+
+ If you don't care to allocate space, use mem = lenmem = NULL 
+*/
+
+
+void kiss_fftr(kiss_fftr_cfg cfg,const kiss_fft_scalar *timedata,kiss_fft_cpx *freqdata);
+/*
+ input timedata has nfft scalar points
+ output freqdata has nfft/2+1 complex points
+*/
+
+void kiss_fftri(kiss_fftr_cfg cfg,const kiss_fft_cpx *freqdata,kiss_fft_scalar *timedata);
+/*
+ input freqdata has  nfft/2+1 complex points
+ output timedata has nfft scalar points
+*/
+
+#define kiss_fftr_free speex_free
+
+#ifdef __cplusplus
+}
+#endif
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/lbr_48k_tables.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/lbr_48k_tables.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,678 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: lbr_48k_tables.c
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+
+int dummy_epic_48k_variable=0;
+#ifdef EPIC_48K
+
+const signed char gain_cdbk_ulbr[192] = {
+-31, -48, -30, 
+-19, -10, -18, 
+-33, -22, -45, 
+-5, -56, -43, 
+-30, -56, -3, 
+-59, -17, -52, 
+-41, -60, -58, 
+-64, -47, -22, 
+-30, -31, -31, 
+-29, -14, -31, 
+-22, -37, -58, 
+-31, -44, 13, 
+-37, 0, 1, 
+-46, -55, -35, 
+-56, -14, -53, 
+-8, 1, -36, 
+-29, -15, -27, 
+-29, -39, -28, 
+-43, -5, 3, 
+-51, -27, -54, 
+10, -46, -36, 
+3, -3, -42, 
+-27, 16, -22, 
+-34, -52, 13, 
+-31, -21, -28, 
+-34, -45, -40, 
+-20, -48, 4, 
+-40, -27, 16, 
+-6, 11, -44, 
+-35, 12, -5, 
+19, -33, -37, 
+-29, 18, -32, 
+-29, -23, -19, 
+16, -47, -28, 
+-34, -30, 17, 
+-20, 2, -26, 
+-38, -40, -36, 
+15, -14, -40, 
+-39, 14, -9, 
+-15, 25, -39, 
+-26, 19, -32, 
+-39, 17, -14, 
+10, -36, -26, 
+14, -13, -40, 
+-29, -21, -12, 
+-8, 19, -39, 
+-36, -18, 15, 
+-32, -38, -38, 
+-19, 4, -23, 
+-38, -7, 11, 
+9, -10, -39, 
+-37, 24, -19, 
+-34, -5, -8, 
+-20, 23, -41, 
+-4, 17, -31, 
+-17, -26, -26, 
+-24, 28, -36, 
+-7, 15, -39, 
+-42, 16, -11, 
+-29, 14, -6, 
+-36, 28, -27, 
+-21, 5, -26, 
+11, -9, -39, 
+-38, -7, 13, 
+};
+
+
+const signed char exc_12_32_table[384] = {
+34, 55, 9, 55, 4, 44, -2, 25, 4, -6, 13, -22, 
+20, 26, -13, -56, -37, 18, 5, 28, 4, 10, 6, -7, 
+37, -24, -31, 22, 12, -6, -4, -7, 2, 0, -3, -2, 
+-16, -13, -1, 9, -2, 4, 6, 5, -3, 3, 8, -1, 
+-1, -6, -2, -1, 8, 24, 19, 33, -73, -53, 6, -18, 
+14, 7, 11, 8, -33, -94, -5, 7, 0, 44, 1, 19, 
+-9, -7, -34, -16, 8, 2, 5, 0, 3, 1, -2, 3, 
+-22, 6, -2, 12, 16, 30, 39, 25, 25, 2, 10, -2, 
+-1, -40, -6, -51, -5, -48, -9, -33, -14, -1, -24, 15, 
+104, 39, 12, -9, -20, -12, -30, -10, -31, -7, -30, -8, 
+-71, -53, -4, -11, 9, -10, 7, -10, 10, -1, 11, 8, 
+24, 14, 6, -3, 10, 8, 8, 11, -6, 11, 0, -2, 
+-6, -2, 1, -1, -3, 8, -41, 27, 57, -7, 11, -16, 
+-61, 50, 10, -10, 4, -13, 14, -7, 1, 5, -4, 4, 
+0, 2, -1, -2, -1, 1, 1, 0, -1, -1, -2, -3, 
+-3, -15, 69, 60, 10, -10, -10, -29, -21, -7, -16, 2, 
+24, -32, 24, -18, -14, -2, -11, 11, -6, 10, 1, 3, 
+24, -10, 14, 18, -13, 17, -16, 4, -3, -21, -3, -11, 
+-19, 12, -14, 26, 20, -9, 24, -15, 18, 1, -32, -2, 
+-1, 8, -3, 4, 11, -47, 7, 46, -4, -10, -10, -2, 
+-24, 29, -33, 6, -20, -3, 0, -12, 5, -30, 8, -13, 
+28, 9, 5, -11, 0, -14, -13, -22, -12, -8, -4, 1, 
+-6, 28, 45, -18, -31, -5, 1, 2, 1, 5, 0, -3, 
+-19, -10, 10, 27, 8, -16, -28, -9, 2, -5, 8, -1, 
+100, -49, 4, -43, 25, -7, 1, 9, -13, 13, -18, 13, 
+-1, -1, 0, 2, -2, -8, 9, -46, -7, 70, 23, 7, 
+-103, 20, 8, 42, -5, 21, -4, 4, 1, -8, 16, -8, 
+3, 3, 8, 4, 7, -3, -3, -4, 9, 6, 2, 13, 
+6, 3, -15, 11, -43, 31, 40, -13, 12, -21, -2, -3, 
+-10, -9, 16, -35, 31, -3, -12, 8, -34, 7, 12, 22, 
+-3, -4, -7, -12, 24, 53, -19, -43, 4, -3, -4, 6, 
+-18, -30, -58, -17, -11, 17, 23, 34, 30, 28, 28, 15, 
+};
+
+
+const signed char cdbk_lsp_vlbr[5120]={
+23, 34, 108, 100, 102, 82, 69, 48, 52, 25,
+0, -37, -55, -78, -111, -79, 58, 57, 45, 32,
+27, -9, -12, -14, -41, -29, -17, -41, 44, 35,
+-24, -68, -72, 61, 100, 73, 100, 80, 70, 37,
+12, -5, 22, 11, -10, -40, -33, -17, 19, 12,
+-20, -57, -94, -92, 56, 71, 48, 31, 22, -5,
+41, 28, 6, -6, -12, -39, -18, -16, -30, -23,
+65, 54, 41, 28, 23, 9, 26, 18, 22, 6,
+17, -16, -33, -54, -87, -79, 8, -8, 44, 35,
+-20, -62, -78, 22, 78, 47, 44, 33, 26, 14,
+8, 1, 45, 47, 72, 68, 55, 31, 36, 17,
+-27, -68, -86, -65, -10, 23, 8, -22, -31, 25,
+-4, -38, -55, -68, -96, -118, -39, 30, 28, 31,
+-21, -66, -47, 99, 91, 68, 78, 56, 64, 36,
+33, 22, 13, -13, -36, -22, 44, 37, 54, 33,
+-31, -76, -106, -100, -5, 21, 7, -17, 13, 48,
+-26, -65, -84, -84, -46, 67, 97, 66, 58, 31,
+-20, -52, -32, -20, 3, 16, 27, 40, 54, 29,
+-6, -35, -56, -64, -8, -31, -36, 21, 26, -3,
+32, 23, 1, -23, -19, -44, -45, -7, 10, -10,
+-24, -55, 2, 67, 72, 85, 90, 74, 77, 45,
+-21, -58, -45, -49, 16, 34, 13, -15, -16, 16,
+8, -31, -34, -61, -83, 10, 24, 8, 56, 25,
+-8, -49, -74, -95, -123, -77, 6, 40, 46, 42,
+-21, -60, -59, -34, -12, 27, 8, -19, -48, -17,
+-25, -66, -78, -73, -81, -16, 14, 0, -2, 33,
+78, 79, 69, 49, 44, 32, 50, 44, 46, 22,
+24, 9, -4, -18, -37, -56, 22, 34, 22, 11,
+-19, -59, -85, -41, 46, 72, 60, 33, 29, -3,
+-21, -66, -70, 65, 92, 57, 61, 41, 40, 23,
+-4, -41, -60, -72, -102, -106, 4, 56, 57, 31,
+-5, -48, -62, -91, -109, 1, 76, 54, 72, 39,
+-21, -61, -86, -46, -34, -39, 42, 25, 15, 12,
+5, -16, -36, -56, 5, 18, 11, 13, 52, 23,
+12, -6, 30, 40, 59, 40, 27, 8, 19, 6,
+25, 8, -9, -19, -25, -53, -40, -38, -46, -4,
+-17, -59, -83, 2, 58, 29, 18, -2, -17, -5,
+-35, -80, -111, -117, -41, -9, 14, 23, 36, 56,
+48, 67, 93, 71, 77, 91, 110, 95, 83, 47,
+-25, -62, -97, -93, 76, 96, 73, 52, 61, 28,
+-9, -55, -46, 49, 33, 8, 1, -25, 28, 23,
+-10, -47, -60, -45, -62, -58, 56, 57, 48, 28,
+34, 12, -9, 0, 34, 4, 6, 11, 3, -18,
+21, -9, -16, -13, -39, -41, 14, -8, 33, 28,
+-7, -49, -61, 15, 34, 3, 2, -13, -28, -17,
+-14, -50, -46, -65, -76, -13, -10, -29, -30, 22,
+-28, -68, -97, -98, -8, 38, 36, 26, 25, 15,
+6, -33, -9, 1, -28, -11, -19, -24, 61, 36,
+-15, -60, -19, 81, 58, 52, 42, 28, 66, 36,
+-15, -52, -71, -15, 11, -13, 38, 28, 11, -4,
+34, 1, -9, -27, -57, -19, 36, 6, 14, 0,
+-1, -43, -14, 16, -12, -5, -14, -29, -33, -32,
+-13, -57, -75, -100, -111, 1, 2, 13, 48, 33,
+12, 16, 100, 85, 69, 49, 40, 29, 46, 23,
+-4, -26, -41, -44, -7, -26, -39, -27, 18, 0,
+-4, -47, -51, 17, 7, -19, 13, -10, -16, 9,
+-24, -63, -93, -53, 25, 14, 73, 51, 35, 8,
+-34, -77, -106, -83, -51, -47, 2, 12, 41, 53,
+-13, -47, -67, -44, 42, 20, 24, 33, 21, -3,
+11, -15, -29, -51, -79, -88, 22, 56, 43, 20,
+11, -22, -37, -1, 61, 40, 28, 24, 22, -6,
+-3, -33, -50, -66, -93, -100, -16, -16, 3, 41,
+-18, -58, -82, -5, 95, 78, 56, 39, 30, 1,
+-6, -47, -28, -26, -36, 49, 55, 51, 71, 35,
+-6, -50, -42, -4, -32, -1, -1, -18, 67, 40,
+-23, -63, -56, -48, -32, 0, -14, -43, -46, 25,
+-17, -61, -63, 13, -1, 28, 23, 10, 67, 36,
+45, 92, 124, 111, 108, 86, 77, 56, 57, 28,
+50, 35, 13, 3, -2, -32, 3, 14, 6, -8,
+12, -17, -24, -42, -67, -23, 67, 49, 64, 38,
+-21, -60, -90, -45, 32, 6, 7, -3, -15, 9,
+-16, -62, -73, 50, 46, 18, 7, -13, 63, 39,
+19, -16, -19, 20, 5, -15, 16, -9, 5, 8,
+-11, -46, -42, -39, -55, -68, -62, -27, -18, 23,
+-23, -61, -67, -71, -29, 44, 32, 10, -15, -12,
+-6, -45, -43, -40, -67, -22, 42, 19, 61, 38,
+9, -13, -38, -37, 40, 30, 15, 9, 11, -16,
+0, -18, -29, -34, -17, -44, -50, -3, 47, 15,
+-3, -46, -26, 20, -10, 16, 20, -2, 43, 18,
+-23, -46, 46, 91, 99, 100, 99, 79, 72, 42,
+-1, -44, -33, -36, -56, 22, 17, 4, 71, 37,
+0, -38, -49, 0, -1, -30, -21, -35, -44, -6,
+-32, -74, -101, -98, -14, -21, -23, 7, 26, 45,
+8, -28, -44, -63, -96, -84, 34, 21, 13, 23,
+10, -24, -38, -17, -29, -53, -16, -41, -14, 23,
+-19, -61, -76, -12, 97, 99, 79, 60, 59, 25,
+5, -11, -26, -54, -26, -8, -13, 3, 25, 4,
+17, 16, 4, -24, -1, 42, 60, 63, 70, 37,
+10, -27, -22, -43, -62, -7, -16, 10, 75, 40,
+-26, -64, -96, -106, -3, 73, 73, 46, 55, 29,
+-2, -45, -43, 45, 46, 17, 37, 10, 30, 32,
+21, -2, -18, -28, -47, -63, -38, -56, -3, 27,
+-17, -48, -9, 9, 3, 28, 50, 58, 73, 44,
+8, -14, -32, -56, -81, -106, -35, 41, 53, 26,
+1, -38, -51, -66, -100, -61, 32, 17, 66, 42,
+17, 5, -6, -21, -26, -52, -36, 23, 56, 22,
+6, -20, -31, -22, -19, -48, 16, 38, 22, -2,
+-25, -67, -93, -51, 82, 62, 71, 69, 63, 35,
+-12, -51, -71, -60, -76, -91, -14, 41, 35, 20,
+-16, -31, 22, 32, 55, 80, 98, 91, 85, 49,
+-21, -63, -92, -6, 57, 27, 36, 11, 60, 39,
+-7, -45, -67, -81, -114, -110, 0, 24, 23, 45,
+-18, -55, -61, -56, -60, -64, -32, -2, 58, 36,
+-3, -33, -51, -24, 19, -10, -19, 4, 14, -15,
+-19, -59, -81, -12, 7, -12, 36, 16, 48, 36,
+17, -13, -32, -49, -78, -95, -1, -3, -10, 25,
+15, 5, 41, 59, 108, 101, 103, 81, 70, 35,
+-14, -52, -37, 15, 93, 83, 66, 50, 47, 15,
+-3, -31, -49, -52, -9, -31, -10, 37, 62, 27,
+-15, -56, -82, -17, 75, 56, 36, 22, 7, -16,
+-24, -63, -93, -84, 25, 94, 98, 65, 60, 31,
+-2, -45, -39, -61, -61, 48, 35, 32, 54, 18,
+-19, -51, -45, -57, -28, -8, 10, 14, 38, 26,
+-2, -46, -38, 45, 26, 22, 48, 21, 63, 40,
+-22, -61, -73, -75, -67, -31, 13, 18, 51, 34,
+-12, -2, -1, -17, -3, -27, -3, 6, -1, -15,
+-16, -59, -78, 10, 36, 9, 4, -18, 33, 22,
+-25, -62, -97, -107, 39, 87, 69, 46, 42, 12,
+11, -7, -30, -36, 19, 2, -10, -7, -4, -24,
+11, -8, 25, 28, 28, 5, -4, -10, 5, -2,
+-10, -48, -37, -17, -38, -9, -2, -19, -30, -22,
+-23, -61, -79, -81, -2, 15, -4, 17, 20, 2,
+25, -14, -3, -10, -38, 1, 14, -14, -9, -27,
+2, -18, -38, -36, -11, -39, -36, -28, -36, -11,
+32, 59, 127, 124, 127, 108, 91, 68, 64, 34,
+3, -32, -37, -10, -25, -46, 12, 1, -17, -24,
+-29, -69, -102, -100, 2, -7, 11, 14, 1, 31,
+30, -6, -4, -16, -44, -5, 3, -9, 66, 40,
+-9, -45, -52, -5, 37, 19, 26, 6, 51, 32,
+-31, -73, -96, -45, -25, -37, -15, -16, 32, 39,
+3, -15, 18, 21, 28, 33, 58, 58, 69, 42,
+-31, -73, -99, -99, -48, 14, 21, 5, 2, 39,
+7, -35, -20, 29, 2, -8, -8, -28, 38, 26,
+-5, -39, -64, -36, 15, -15, -11, -21, -23, 5,
+-8, -51, -56, 15, -1, -14, -8, -31, 36, 22,
+-8, -53, -68, -98, -101, 42, 49, 38, 41, 12,
+10, -27, -22, 4, -23, -21, 30, -1, 22, 26,
+-13, -56, -42, 31, 9, -1, -10, -2, 22, -4,
+15, 8, 56, 57, 45, 55, 57, 46, 72, 44,
+-7, -53, -26, 53, 21, 17, 0, 0, 74, 41,
+3, -18, -2, 0, 19, 17, 42, 36, 47, 26,
+24, -7, -23, -34, -62, -60, 6, -22, 18, 25,
+-11, -42, -46, -61, -83, -99, -67, -11, 28, 39,
+30, -3, -10, -1, -24, -30, -1, -28, 15, 18,
+19, -15, -10, -6, -35, -26, 33, 10, 56, 39,
+-13, -53, -82, -42, 53, 37, 18, 10, -3, -21,
+-21, -60, -89, -46, 89, 94, 71, 46, 42, 9,
+-2, -34, -44, -46, -64, -84, -1, 37, 16, 0,
+-17, -51, -65, -64, -7, -17, -29, -11, 52, 27,
+22, -15, -16, -39, -55, 26, 36, 21, 62, 28,
+-2, -26, -38, -49, -55, -80, -75, 8, 20, 9,
+-6, -47, -61, -82, -103, -17, -15, -25, 53, 40,
+-8, -47, -66, -18, 56, 43, 25, 29, 39, 3,
+-27, -66, -86, -69, -50, -59, -34, -1, 19, 42,
+3, -20, 2, 21, 72, 57, 52, 36, 31, 7,
+-12, -49, -61, -13, -1, -33, 5, 37, 26, 2,
+-27, -69, -92, -62, 2, 43, 88, 67, 64, 36,
+0, -40, -4, -6, -20, 43, 33, 25, 50, 20,
+14, -20, -30, -44, -73, -37, -24, -47, 26, 20,
+31, 53, 111, 118, 127, 126, 121, 99, 85, 46,
+-14, -45, -51, -39, 24, 5, -6, 17, 46, 14,
+-4, -43, -45, -70, -63, 8, 14, 58, 78, 39,
+-8, -47, -66, -84, -114, -55, 10, -8, 32, 40,
+28, 22, 42, 26, 8, -21, -16, -6, 22, 10,
+24, 10, 34, 31, 35, 31, 46, 39, 59, 36,
+-4, -43, -62, -10, 20, -14, 2, 14, -6, -19,
+-21, -62, -89, -22, 62, 33, 30, 16, 15, 15,
+0, -22, -31, -45, -58, -80, -66, 13, 68, 34,
+-16, -45, -6, 7, -6, -17, -14, -15, 2, 2,
+10, -5, -22, -38, -40, -70, -60, -15, -23, 0,
+22, -11, -22, -39, -67, -25, 30, 5, 58, 37,
+-21, -47, 6, 43, 37, 45, 65, 66, 73, 43,
+2, -25, -40, -53, -72, -94, -35, 24, 9, 8,
+-3, 0, -3, -9, 4, -23, -10, 20, 43, 14,
+-2, -41, -60, -9, 57, 32, 17, 16, 6, -19,
+1, -31, -36, -36, -54, -68, -77, -75, 21, 37,
+-19, -32, 79, 90, 92, 81, 67, 47, 52, 28,
+-6, -36, -57, -62, 27, 40, 21, 11, 9, -19,
+-10, -47, -49, -59, -74, -18, -14, -30, 25, 18,
+-23, -69, -82, 60, 66, 40, 75, 54, 65, 38,
+-19, -57, -92, -68, 66, 58, 34, 18, 1, -16,
+-29, -68, -99, -88, -37, -38, 13, 8, 5, 40,
+-22, -63, -75, 14, 15, 7, 75, 58, 59, 34,
+-23, -62, -82, -39, -31, -53, -27, 5, -3, 20,
+13, -26, -20, 22, 2, -3, 35, 13, 54, 39,
+32, 5, -13, -22, -45, -58, -1, -20, -19, 7,
+30, 46, 70, 55, 89, 88, 91, 67, 56, 28,
+-13, -50, -63, -25, -28, -50, -23, -32, -34, 19,
+-13, -54, -65, -9, -20, -37, 29, 6, 11, 25,
+0, -40, -55, -78, -107, -25, 47, 20, 34, 16,
+-20, -58, -96, -103, 38, 43, 27, 30, 15, -1,
+-16, -49, -52, -66, -80, -57, -44, -39, 6, 38,
+0, -38, 5, 13, -8, 23, 24, 1, 7, -9,
+-18, -56, -64, -7, 38, 13, 11, 32, 28, 0,
+14, -3, -20, -17, 4, -26, -34, -8, 19, -9,
+-23, -60, -83, -38, -8, -32, 11, 19, -1, -5,
+-5, -47, -12, 56, 38, 22, 18, -8, -5, -8,
+18, -4, -24, -16, 27, 2, -6, 5, 25, -5,
+13, 0, -19, -35, -23, -45, -59, -30, 19, 3,
+19, -12, -23, 1, -7, -35, -14, -32, -23, 4,
+-23, -64, -67, -22, -27, -5, -5, -20, 20, 5,
+20, 11, 83, 92, 85, 89, 69, 53, 80, 48,
+15, -2, -21, -29, -18, -48, -52, -12, -11, -21,
+-6, -38, -55, -68, -9, 33, 22, 19, 25, -1,
+-8, -46, -49, -67, -64, 16, 8, -6, 32, 15,
+3, -25, -46, -46, 39, 50, 34, 21, 46, 14,
+8, -33, -37, -68, -82, 31, 34, 13, 19, -6,
+33, 0, 5, -7, -32, 2, 22, -3, 35, 17,
+-23, -62, -91, -64, 6, 3, 36, 26, 7, -3,
+-12, -54, -60, 26, 46, 16, 30, 22, 8, -4,
+-23, -61, -40, 31, 58, 73, 88, 77, 74, 41,
+-2, -42, -49, 13, 5, -15, 22, -4, 26, 27,
+-13, -54, -39, 18, 2, -8, -12, 34, 56, 23,
+-20, -31, 27, 23, 24, 28, 39, 33, 47, 27,
+36, 17, -4, -20, -30, -61, -8, 20, 0, -15,
+-10, -51, -72, -82, -111, -73, 34, 25, 19, 38,
+-10, -45, -63, -55, -46, -75, -45, 34, 34, 12,
+6, -18, 29, 26, 7, -9, 0, 5, 38, 22,
+-7, -52, -16, 69, 43, 26, 23, 2, 51, 34,
+-12, -51, -59, -78, -88, 15, 20, 0, -14, 12,
+-3, -36, -59, -45, 60, 49, 28, 20, 16, -13,
+-28, -70, -90, 9, 67, 48, 90, 77, 70, 38,
+-10, -39, -58, -54, 15, -12, 3, 35, 27, -3,
+12, -1, 28, 29, 55, 53, 80, 65, 51, 23,
+-17, -61, -39, 74, 56, 43, 75, 51, 58, 36,
+-30, -71, -93, -43, -29, -26, 4, -19, -14, 37,
+3, -13, -31, -38, 11, -5, -22, -11, 43, 14,
+-25, -65, -80, -79, -71, 3, 37, 32, 20, 9,
+-20, -60, -77, -26, 18, 43, 44, 24, 22, -3,
+-4, -42, -22, -19, -45, -32, -35, -39, -46, 1,
+-25, -59, -27, -10, -7, -4, 7, 13, 25, 12,
+8, -25, -32, -47, -74, -32, 27, 6, 25, 7,
+41, 40, 62, 64, 64, 50, 54, 42, 49, 25,
+-21, -63, -88, -21, 16, -3, -4, -26, 57, 38,
+8, -25, -34, 2, -8, -28, 2, -22, 12, 23,
+-19, -49, 10, 71, 84, 71, 66, 48, 42, 22,
+-20, -58, -89, -57, 62, 44, 33, 36, 25, -1,
+-22, -55, -27, 1, 43, 37, 46, 50, 51, 26,
+1, -38, -46, 22, 34, 4, 20, -2, 3, 9,
+-4, -42, -49, -75, -89, -24, -25, 19, 71, 39,
+5, -28, -45, -43, -63, -75, -17, -38, 14, 30,
+-4, -36, -62, -59, -29, -43, -4, -16, 11, 23,
+-19, -57, -82, -39, 26, 2, -2, 20, 11, -10,
+-28, -68, -92, -70, 9, -1, -15, -30, 11, 31,
+1, -22, -41, -49, -30, -58, -48, 8, 4, -9,
+38, 41, 108, 115, 96, 98, 103, 84, 86, 51,
+15, 1, 58, 46, 26, 6, 16, 18, 41, 24,
+4, -34, -14, -27, -42, 20, 18, 2, 23, 1,
+-22, -59, -83, -70, -22, -42, -26, 29, 29, 15,
+-14, -34, 11, -1, -21, -35, -3, 1, 29, 16,
+-16, -57, -78, -7, 17, -13, 8, -13, -6, 22,
+-22, -32, -21, -20, 20, -4, 10, 13, 12, -4,
+8, -30, -30, -46, -71, -4, 3, -11, 4, -11,
+16, 5, -15, -21, 3, -23, -25, -19, -28, -32,
+-28, -68, -98, -101, -34, 19, 71, 52, 49, 30,
+-18, -57, -82, -56, -56, -66, 15, 12, 1, 29,
+-21, -62, -76, -27, -33, -38, 18, 30, 54, 32,
+3, -36, -10, -17, -34, -3, -8, 32, 63, 27,
+1, -30, -44, -20, -13, -49, -25, 3, -14, -18,
+-26, -68, -80, -46, -28, 17, 42, 37, 58, 34,
+30, 26, 57, 55, 49, 25, 16, 3, 24, 11,
+35, 35, 67, 57, 60, 82, 114, 103, 93, 55,
+18, -8, -23, -32, -53, -68, 15, 11, -6, -7,
+-2, -43, -29, 0, -28, -5, -5, -15, 25, -1,
+4, -13, -35, -45, 14, -6, -2, 19, 16, -9,
+-30, -72, -93, -93, -73, -10, -15, 6, 30, 45,
+-23, -58, -50, -55, -74, -60, -23, 0, 6, 21,
+-4, -40, -63, -24, 7, -19, 4, -18, 27, 28,
+-12, 1, 88, 76, 74, 88, 93, 90, 80, 44,
+-13, -59, -43, 52, 27, 21, 15, 12, 42, 11,
+22, -14, -17, -33, -57, -4, 5, -18, 40, 18,
+-3, -23, -43, -44, 8, -16, -14, -4, -20, -29,
+35, 45, 75, 82, 111, 117, 125, 105, 89, 51,
+-3, -38, -57, -30, 79, 71, 48, 33, 33, 0,
+-17, -62, -57, 66, 67, 35, 29, 5, 22, 17,
+3, -31, -34, -21, -44, -49, 42, 23, 24, 26,
+-23, -62, -74, -49, -30, -30, -37, -50, 9, 35,
+-17, -57, -71, -81, -45, 61, 58, 37, 31, 9,
+3, -7, 28, 14, -2, 0, 40, 41, 58, 33,
+-11, -51, -74, -17, 40, 12, 8, 13, -4, -22,
+-16, -46, -31, -35, -49, -49, -26, -9, -7, -7,
+17, -9, -24, -41, -68, -73, 38, 33, 19, 16,
+-15, -50, -47, -16, -24, -21, 59, 56, 53, 30,
+-14, -54, -57, 2, -17, -33, -34, -21, 4, -4,
+-23, -62, -93, -72, 48, 31, 21, 6, 3, 17,
+-18, -63, -79, 44, 68, 36, 45, 20, 57, 37,
+-29, -72, -99, -111, -86, -31, 7, 25, 39, 55,
+-14, -49, -53, -63, -80, -31, 24, 13, 1, -1,
+-9, -45, -55, -27, -31, -63, -23, 25, 13, -5,
+-20, -61, -80, 7, 44, 16, 54, 40, 32, 17,
+24, 7, -8, -43, -62, -54, -11, 7, 35, 27,
+-12, -55, -59, -48, -69, -4, -1, -12, 68, 39,
+-12, -31, 52, 63, 53, 34, 29, 22, 36, 19,
+-26, -66, -97, -79, 50, 41, 40, 48, 54, 28,
+-2, -37, -41, -2, -11, -30, 29, 16, 4, -2,
+40, 49, 56, 37, 39, 40, 64, 59, 67, 39,
+11, -5, 20, 14, 25, 16, 25, 22, 37, 17,
+-3, -43, -46, -10, -35, -38, -35, -39, 67, 43,
+-7, -47, -33, -39, -60, -12, -18, 11, 43, 11,
+-25, -65, -91, -76, -91, -81, 0, 13, 34, 50,
+-9, -50, -52, 17, 0, -4, 43, 18, 63, 42,
+-8, -15, 15, 41, 56, 35, 51, 45, 51, 29,
+0, -14, -24, -36, -43, -70, -39, 27, 33, 5,
+-25, -62, -81, -66, -12, -26, -16, -4, -13, 21,
+-29, -68, -60, -24, -3, 11, 18, 19, 30, 20,
+1, -35, -42, -30, -57, -51, 13, -17, 3, 22,
+-8, -27, -12, -2, -7, -21, 36, 41, 34, 12,
+-17, -56, -62, -72, -73, -17, -26, 9, 16, 13,
+11, -21, -37, -3, 16, -17, 1, -3, -18, -19,
+15, -20, -19, -22, -49, -30, -7, -29, 3, -2,
+17, -4, 11, 6, 51, 40, 36, 34, 48, 22,
+-19, -55, -29, 37, 68, 49, 45, 33, 42, 23,
+7, -30, -22, 3, -22, -36, -36, -54, 20, 22,
+20, 2, -15, -39, -59, -85, -10, 37, 21, 2,
+-15, -54, -77, -54, 74, 70, 48, 32, 51, 20,
+-25, -64, -70, -75, -52, 17, 6, -20, -30, 26,
+-13, -55, -15, 39, 16, 42, 30, 33, 62, 28,
+-21, -56, -30, -35, 6, 13, -4, -29, 33, 27,
+-17, -55, -75, -31, 3, -28, -26, 16, 18, -4,
+-13, -44, -60, -52, -9, -36, -38, 1, -9, -9,
+-12, -50, -77, -70, 43, 47, 28, 13, 43, 16,
+-13, -57, -80, -104, -113, -30, 43, 45, 52, 39,
+3, -28, -42, -37, -58, -67, 23, 4, 38, 33,
+-21, -64, -74, -22, 43, 83, 81, 56, 62, 32,
+34, 26, 23, 9, 14, 17, 26, 16, 37, 19,
+-5, -48, -49, -75, -65, 9, -6, 41, 45, 15,
+32, 30, 63, 83, 90, 91, 100, 84, 85, 52,
+-19, -54, -68, -71, 11, 30, 13, 1, 63, 37,
+44, 76, 99, 87, 117, 113, 103, 77, 64, 32,
+-16, -45, -12, 30, 27, 15, 57, 49, 42, 22,
+9, -15, -31, -28, -36, -61, -13, -18, -33, -5,
+-12, -55, -8, 82, 64, 47, 42, 21, 27, 9,
+-15, -56, -74, -12, -19, -28, 7, -16, 53, 38,
+-7, -45, -64, -55, -74, -80, 35, 45, 24, 15,
+-25, -48, -34, -42, -6, -27, -9, 9, 13, -7,
+-25, -65, -84, -35, 30, 14, 24, 39, 48, 28,
+-22, -62, -86, -51, 64, 104, 94, 61, 62, 31,
+16, -15, -25, -28, -55, -56, -10, -23, 52, 36,
+10, -10, -22, -46, -71, -92, -45, -13, 16, 26,
+-22, -65, -84, 17, 85, 55, 66, 48, 55, 31,
+-1, -38, -33, -25, -49, -15, 18, -10, 41, 30,
+-3, -24, -47, -60, -30, -46, -17, -13, -27, 1,
+-7, -41, -61, -54, -50, -78, -28, 5, -2, 20,
+17, -12, -27, -4, 8, -27, -5, 23, 14, -12,
+-36, -81, -111, -75, -17, -9, 9, 9, 39, 49,
+-13, -59, -54, 68, 51, 32, 35, 14, 64, 38,
+-11, -44, -69, -57, 11, -11, -5, 3, -16, -15,
+34, 36, 41, 16, -8, -24, 11, 23, 48, 28,
+-17, -42, 8, 17, 45, 69, 71, 55, 49, 23,
+3, -30, -46, -64, -95, -109, 2, 39, 19, 19,
+25, -13, -7, 16, -11, -5, 8, -11, 52, 33,
+-8, -37, -57, -60, 13, 7, -14, -4, 20, -7,
+7, -31, 9, 44, 20, 22, 29, 10, 52, 31,
+3, -22, -36, -53, -80, -77, -35, -41, 54, 41,
+-21, -59, -87, -83, 12, 69, 57, 36, 32, 2,
+6, -14, -34, -42, -4, -32, -27, 10, 4, -20,
+-11, -56, -59, 25, 8, -5, -9, -26, 68, 43,
+22, 13, 40, 39, 73, 81, 95, 88, 82, 45,
+-18, -62, -79, 28, 60, 28, 29, 3, 23, 25,
+6, -31, -39, -55, -85, -32, 7, -17, 48, 30,
+7, -24, -42, -8, 39, 10, 7, 11, 1, -20,
+-1, -36, -26, -30, -48, 2, 46, 26, 35, 14,
+-17, -57, -56, -10, -4, 26, 22, 6, -4, -16,
+-18, -55, -59, -67, -86, -50, 3, 29, 29, 16,
+-25, -61, -33, 2, 26, 25, 23, 10, 24, 16,
+26, 15, -8, -20, 6, -21, -16, 3, 0, -22,
+13, -17, -26, -12, -31, -48, 15, -3, 1, 14,
+4, -27, -33, -21, -29, -53, -52, -64, -42, 22,
+-11, -41, -42, -40, -42, -64, 0, 48, 50, 19,
+-13, -47, -42, -56, -50, 10, 3, -9, -30, -16,
+-4, -47, -12, 14, -13, 21, 13, 6, 73, 40,
+-15, -50, -63, -41, -31, -55, -60, -13, 28, 15,
+-6, -50, -56, -81, -95, 30, 29, 21, 71, 35,
+-14, -58, -65, 37, 40, 9, 18, -10, -4, 20,
+31, 33, 79, 106, 119, 103, 100, 77, 64, 33,
+14, 7, 56, 81, 97, 85, 85, 61, 45, 20,
+-24, -66, -74, -51, -17, 16, 5, -21, 22, 26,
+-1, -25, -38, -24, -2, -35, -26, 21, 34, 1,
+20, 15, 75, 59, 39, 26, 48, 43, 50, 29,
+26, 1, -15, -4, -9, -38, 9, 2, -9, -8,
+20, 14, 19, 13, 2, -16, 24, 25, 19, 3,
+-8, -41, -58, -78, -109, -106, -27, 9, 53, 46,
+17, 5, -13, -25, -24, -54, -20, 2, -21, -25,
+-11, -50, -48, 19, 10, -7, 46, 26, 24, 17,
+-28, -68, -69, -50, -49, -33, -7, 10, 20, 21,
+4, -36, -21, 38, 19, 1, 25, -3, 20, 22,
+-18, -58, -87, -44, 82, 73, 49, 31, 19, -7,
+-21, -61, -78, -44, -58, -66, -9, -23, 10, 40,
+-25, -66, -76, -33, -33, 6, 16, -6, -21, 5,
+-27, -69, -77, 5, -2, -7, 6, 9, 24, 6,
+1, -41, -41, -58, -79, 25, 69, 43, 68, 36,
+-28, -67, -85, -71, -34, 0, 14, 12, -2, 4,
+-2, -33, -55, -37, 37, 25, 6, 6, 29, -4,
+-8, -25, -11, -9, 40, 23, 17, 25, 37, 12,
+-21, -27, 52, 60, 47, 58, 76, 70, 69, 38,
+23, 15, 22, -8, -32, -50, -10, 3, 31, 21,
+-10, -44, -67, -61, -29, -54, 8, 39, 21, 4,
+31, 18, 30, 36, 46, 28, 50, 42, 35, 13,
+-21, -57, -24, -16, -15, 14, 3, -25, -17, 20,
+23, 6, 24, 35, 90, 72, 64, 55, 55, 23,
+7, -28, -42, -19, -36, -50, -15, -40, 29, 28,
+-21, -59, -66, -59, -6, 85, 83, 53, 54, 26,
+2, -20, -42, -52, -27, -49, 5, 9, -9, -8,
+-18, -56, -84, -72, 24, 51, 32, 20, 13, -10,
+-13, -53, -64, -39, -63, -40, 24, 0, 34, 29,
+0, -31, -45, -63, -90, -53, 3, -18, -9, 24,
+-13, -57, -71, 27, 19, -3, 25, -3, 45, 35,
+12, -9, -26, -40, -51, -78, -24, 11, -9, -6,
+-12, -49, -45, -33, -50, -48, -46, -52, 2, 25,
+-14, -56, -84, -108, -122, -50, 4, 22, 42, 53,
+-6, -44, -54, -28, -41, -61, 19, 25, 6, 1,
+-32, -75, -95, -38, -1, -15, 7, 14, 23, 23,
+11, 12, 37, 30, 38, 51, 80, 80, 82, 47,
+-19, -56, -69, -82, -98, -64, -29, 2, 28, 42,
+-18, -49, 3, 34, 41, 39, 32, 18, 21, 7,
+-8, 23, 39, 30, 30, 27, 41, 36, 44, 23,
+-16, -49, -69, -46, 1, -27, 41, 48, 35, 15,
+6, -32, -36, 5, -17, -30, 2, -16, 51, 35,
+-23, -64, -91, -21, 71, 44, 52, 44, 40, 21,
+-22, -55, -40, -20, 62, 52, 38, 29, 27, 5,
+-27, -69, -75, -6, -8, 3, -2, -30, -42, 13,
+2, -29, -42, -10, 29, 2, 15, 30, 26, 0,
+-27, -69, -85, -75, -54, -8, -14, -31, 16, 42,
+-2, -44, -54, -75, -101, -6, 4, -3, 32, 13,
+7, -3, -22, -43, -14, -27, -24, -11, -14, -12,
+-18, -57, -85, -66, 47, 86, 75, 45, 42, 10,
+18, 3, 39, 76, 80, 48, 48, 41, 44, 21,
+-13, -51, -73, -22, -15, -41, 3, -4, -22, 3,
+-10, -50, -63, -9, -23, -42, -6, -30, 11, 28,
+15, -11, -29, -39, -57, -71, -23, -40, -33, 20,
+-2, -40, -48, -5, -21, -25, 31, 7, 53, 35,
+-19, -63, -72, 39, 34, 16, 37, 17, 54, 31,
+-18, -49, -28, -27, -40, -29, 4, 4, 19, 11,
+-1, -43, -41, 24, 15, -12, -4, -31, -4, 23,
+-11, -46, -79, -74, 34, 21, 9, 15, 3, -13,
+-16, -51, -56, -55, 8, 62, 50, 30, 43, 14,
+-1, -25, -27, -32, -46, -62, -66, -36, 53, 32,
+-12, -49, -77, -50, 2, -21, 23, 6, 14, 21,
+-5, -47, -58, -77, -105, -14, 30, 9, 73, 44,
+-24, -52, -4, 10, 13, 13, 27, 27, 42, 24,
+-10, -38, -27, -15, -24, -52, -53, 1, 14, -6,
+-17, -45, -13, 2, 19, 53, 83, 79, 76, 43,
+-21, -62, -86, -48, 40, 17, 14, -9, 40, 30,
+-1, -32, -51, -33, -3, -35, 2, 17, -2, -12,
+-21, -60, -85, -70, 33, 73, 58, 37, 67, 36,
+-1, -45, -39, 37, 17, 3, 18, -8, 53, 35,
+-8, -47, -65, -61, -87, -93, 9, 9, 2, 33,
+-13, -55, -56, -19, -29, 14, 17, 6, 55, 28,
+5, 1, -7, -23, -26, -56, -39, 14, 11, -13,
+-28, -69, -89, -74, -83, -45, 1, 0, 16, 45,
+-3, 5, 91, 104, 119, 111, 97, 76, 72, 39,
+19, 5, -12, -34, -41, -72, -67, 14, 21, 1,
+-17, -49, 15, 27, 13, 6, 2, 12, 27, 10,
+-10, -30, 18, 36, 93, 87, 87, 69, 58, 26,
+37, 32, 64, 54, 53, 67, 78, 73, 80, 48,
+48, 46, 38, 9, -1, 8, 47, 44, 58, 33,
+-23, -61, -88, -76, 27, 14, 9, 36, 36, 10,
+-24, -66, -88, -97, -55, 20, 19, 16, 52, 31,
+4, -16, -1, -8, 2, 0, 15, 13, 29, 14,
+-9, -44, -66, -72, 8, 32, 37, 38, 46, 16,
+-22, -65, -62, 30, 22, 51, 57, 45, 68, 38,
+-4, -42, -53, -33, -54, -53, -4, -18, 62, 40,
+-5, -37, -61, -41, 35, 15, -2, -3, -12, -28,
+-18, -65, -55, 90, 80, 49, 44, 21, 59, 36,
+5, -16, -31, -32, -37, -62, -19, -11, 9, 16,
+-22, -60, -67, -51, -61, -35, -5, -18, -27, 24,
+-18, -55, -39, -42, -40, 20, 25, 6, 6, 7,
+0, -25, -42, -50, -59, -84, -31, -13, -22, 17,
+-32, -73, -100, -89, -21, -10, 18, 38, 31, 23,
+-15, -54, -57, -13, -18, -41, -32, 17, 50, 21,
+-16, -57, -71, -10, -8, -26, -38, -47, 42, 25,
+-17, -58, -82, -7, 33, 3, 30, 11, 13, 24,
+-23, -61, -97, -83, 82, 81, 57, 39, 31, 2,
+26, 32, 104, 86, 62, 55, 77, 70, 74, 43,
+-8, -29, -33, -52, -74, -73, -17, 14, 39, 25,
+-21, -60, -68, -22, 43, 37, 51, 54, 64, 36,
+-5, -30, -50, -52, 22, 7, 10, 13, 0, -20,
+-15, -53, -61, -34, -50, -25, 15, 6, 0, -14,
+-10, -51, -60, 20, 77, 50, 34, 22, 8, -8,
+-8, -45, -52, -59, -76, -35, -43, -49, 47, 40,
+41, 44, 53, 40, 41, 30, 38, 31, 46, 24,
+19, 3, -15, -26, -16, -45, -13, 24, 18, -5,
+-3, -39, -54, -35, -49, -70, 2, -6, -19, 15,
+-13, -53, -36, 6, -3, 45, 50, 30, 33, 10,
+15, -25, -16, -4, -32, 7, 23, 6, 67, 36,
+-21, -58, -87, -71, 10, -12, -16, 19, 10, 0,
+9, -15, -6, 25, 31, 7, 30, 28, 20, 2,
+2, -28, -42, -50, -67, -75, 12, 12, -4, 8,
+-17, -63, -58, 56, 49, 36, 60, 38, 37, 14,
+-13, -48, -38, -29, -44, -25, -20, -33, 38, 20,
+2, -37, -42, -1, -18, -42, 3, -17, -19, 12,
+-20, -60, -73, -7, 12, -13, -22, -38, 4, 10,
+-8, -41, -63, -65, 42, 63, 45, 31, 31, 0,
+-4, -46, -38, -9, -35, 15, 50, 27, 67, 39,
+3, -7, -13, -34, -51, -47, 9, 39, 54, 29,
+-29, -71, -89, -52, -39, -6, 3, 2, 38, 28,
+-14, -42, -13, -15, -19, 0, 20, 12, 37, 25,
+11, -26, -24, -40, -65, -11, -13, -27, 65, 37,
+0, -31, -46, -17, -21, -45, 11, -2, 25, 24,
+51, 91, 102, 87, 85, 63, 57, 42, 48, 23,
+-4, -34, -56, -70, -10, -14, 4, 18, 3, -8,
+-23, -59, -39, -44, -42, -14, -10, -23, -4, 17,
+-2, 4, 35, 63, 69, 75, 82, 63, 78, 48,
+-17, -55, -60, -3, -4, -19, 4, -4, -18, -29,
+2, -20, -36, -50, -32, -59, -16, 30, 16, -6,
+-12, -47, 24, 68, 45, 46, 41, 32, 65, 37,
+-4, -40, -54, -67, -96, -66, -9, -25, 42, 38,
+-15, 13, 58, 58, 84, 104, 119, 104, 89, 51,
+-15, -24, -9, -24, -27, -50, -7, 28, 29, 6,
+-7, -33, -35, -49, -65, -53, -37, -10, 33, 14,
+31, 19, 46, 72, 67, 45, 83, 68, 63, 41,
+-14, -53, -59, -17, 55, 79, 64, 39, 43, 10,
+};
+
+const signed char cdbk_lsp2_vlbr[160]={
+-20, -30, -24, 17, 7, -13, -21, 61, 56, 16,
+12, 1, 10, 77, 32, 3, 7, 3, -25, -31,
+-4, 2, -36, -83, 18, 5, -5, 5, 11, 23,
+-2, -1, -11, -12, -20, -28, 68, 50, -17, -20,
+5, 2, 1, 20, 17, 4, -52, -66, 36, 24,
+-4, -10, 7, -15, -32, 80, 37, 8, -13, -29,
+33, 37, 28, 15, 8, 14, 35, 18, 50, 36,
+-4, -1, 4, -7, 3, 3, -11, -58, -75, 13,
+13, 21, 24, -11, -12, -38, -72, 33, 15, -12,
+-44, -17, 83, 21, 2, 7, 0, 4, 0, -1,
+-25, -42, -51, 33, 20, 15, 30, -13, 9, 32,
+6, 2, -8, 7, -38, -77, 6, -13, -7, 32,
+48, 57, 32, -12, -10, -4, 2, -15, -29, -29,
+2, 10, -9, -16, 79, 44, 7, 12, -5, -18,
+-23, -29, -35, -3, -3, -18, -34, -3, -39, -50,
+-5, -10, -8, -37, -76, 11, -4, -19, 30, 16,
+};
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/lpc.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/lpc.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,201 @@
+/*
+  Copyright 1992, 1993, 1994 by Jutta Degener and Carsten Bormann,
+  Technische Universitaet Berlin
+
+  Any use of this software is permitted provided that this notice is not
+  removed and that neither the authors nor the Technische Universitaet Berlin
+  are deemed to have made any representations as to the suitability of this
+  software for any purpose nor are held responsible for any defects of
+  this software.  THERE IS ABSOLUTELY NO WARRANTY FOR THIS SOFTWARE.
+
+  As a matter of courtesy, the authors request to be informed about uses
+  this software has found, about bugs in this software, and about any
+  improvements that may be of general interest.
+
+  Berlin, 28.11.1994
+  Jutta Degener
+  Carsten Bormann
+
+
+   Code modified by Jean-Marc Valin
+
+   Speex License:
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "lpc.h"
+
+#ifdef BFIN_ASM
+#include "lpc_bfin.h"
+#endif
+
+/* LPC analysis
+ *
+ * The next two functions calculate linear prediction coefficients
+ * and/or the related reflection coefficients from the first P_MAX+1
+ * values of the autocorrelation function.
+ */
+
+/* Invented by N. Levinson in 1947, modified by J. Durbin in 1959.
+ */
+
+/* returns minimum mean square error    */
+spx_word32_t _spx_lpc(
+spx_coef_t       *lpc, /* out: [0...p-1] LPC coefficients      */
+const spx_word16_t *ac,  /* in:  [0...p] autocorrelation values  */
+int          p
+)
+{
+   int i, j;  
+   spx_word16_t r;
+   spx_word16_t error = ac[0];
+
+   if (ac[0] == 0)
+   {
+      for (i = 0; i < p; i++)
+         lpc[i] = 0;
+      return 0;
+   }
+
+   for (i = 0; i < p; i++) {
+
+      /* Sum up this iteration's reflection coefficient */
+      spx_word32_t rr = NEG32(SHL32(EXTEND32(ac[i + 1]),13));
+      for (j = 0; j < i; j++) 
+         rr = SUB32(rr,MULT16_16(lpc[j],ac[i - j]));
+#ifdef FIXED_POINT
+      r = DIV32_16(rr+PSHR32(error,1),ADD16(error,8));
+#else
+      r = rr/(error+.003*ac[0]);
+#endif
+      /*  Update LPC coefficients and total error */
+      lpc[i] = r;
+      for (j = 0; j < i>>1; j++) 
+      {
+         spx_word16_t tmp  = lpc[j];
+         lpc[j]     = MAC16_16_P13(lpc[j],r,lpc[i-1-j]);
+         lpc[i-1-j] = MAC16_16_P13(lpc[i-1-j],r,tmp);
+      }
+      if (i & 1) 
+         lpc[j] = MAC16_16_P13(lpc[j],lpc[j],r);
+
+      error = SUB16(error,MULT16_16_Q13(r,MULT16_16_Q13(error,r)));
+   }
+   return error;
+}
+
+
+#ifdef FIXED_POINT
+
+/* Compute the autocorrelation
+ *                      ,--,
+ *              ac(i) = >  x(n) * x(n-i)  for all n
+ *                      `--'
+ * for lags between 0 and lag-1, and x == 0 outside 0...n-1
+ */
+
+#ifndef OVERRIDE_SPEEX_AUTOCORR
+void _spx_autocorr(
+const spx_word16_t *x,   /*  in: [0...n-1] samples x   */
+spx_word16_t       *ac,  /* out: [0...lag-1] ac values */
+int          lag, 
+int          n
+)
+{
+   spx_word32_t d;
+   int i, j;
+   spx_word32_t ac0=1;
+   int shift, ac_shift;
+   
+   for (j=0;j<n;j++)
+      ac0 = ADD32(ac0,SHR32(MULT16_16(x[j],x[j]),8));
+   ac0 = ADD32(ac0,n);
+   shift = 8;
+   while (shift && ac0<0x40000000)
+   {
+      shift--;
+      ac0 <<= 1;
+   }
+   ac_shift = 18;
+   while (ac_shift && ac0<0x40000000)
+   {
+      ac_shift--;
+      ac0 <<= 1;
+   }
+   
+   
+   for (i=0;i<lag;i++)
+   {
+      d=0;
+      for (j=i;j<n;j++)
+      {
+         d = ADD32(d,SHR32(MULT16_16(x[j],x[j-i]), shift));
+      }
+      
+      ac[i] = SHR32(d, ac_shift);
+   }
+}
+#endif
+
+
+#else
+
+
+
+/* Compute the autocorrelation
+ *                      ,--,
+ *              ac(i) = >  x(n) * x(n-i)  for all n
+ *                      `--'
+ * for lags between 0 and lag-1, and x == 0 outside 0...n-1
+ */
+void _spx_autocorr(
+const spx_word16_t *x,   /*  in: [0...n-1] samples x   */
+float       *ac,  /* out: [0...lag-1] ac values */
+int          lag, 
+int          n
+)
+{
+   float d;
+   int i;
+   while (lag--) 
+   {
+      for (i = lag, d = 0; i < n; i++) 
+         d += x[i] * x[i-lag];
+      ac[lag] = d;
+   }
+   ac[0] += 10;
+}
+
+#endif
+
+

Added: freeswitch/trunk/libs/speex/libspeex/lpc.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/lpc.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,53 @@
+/* Copyright (C) 2002 Jean-Marc Valin */
+/**
+   @file lpc.h
+   @brief Functions for LPC (Linear Prediction Coefficients) analysis
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef LPC_H
+#define LPC_H
+
+#include "misc.h"
+
+void _spx_autocorr(
+              const spx_word16_t * x,   /*  in: [0...n-1] samples x   */
+              spx_word16_t *ac,   /* out: [0...lag-1] ac values */
+              int lag, int   n);
+
+spx_word32_t                      /* returns minimum mean square error    */
+_spx_lpc(
+    spx_coef_t       * lpc, /*      [0...p-1] LPC coefficients      */
+    const spx_word16_t * ac,  /*  in: [0...p] autocorrelation values  */
+    int p
+    );
+
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/lpc_bfin.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/lpc_bfin.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,131 @@
+/* Copyright (C) 2005 Analog Devices */
+/**
+   @file lpc_bfin.h
+   @author Jean-Marc Valin 
+   @brief Functions for LPC (Linear Prediction Coefficients) analysis (Blackfin version)
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#define OVERRIDE_SPEEX_AUTOCORR
+void _spx_autocorr(
+const spx_word16_t *x,   /*  in: [0...n-1] samples x   */
+spx_word16_t       *ac,  /* out: [0...lag-1] ac values */
+int          lag, 
+int          n
+                  )
+{
+   spx_word32_t d;
+   const spx_word16_t *xs;
+   int i, j;
+   spx_word32_t ac0=1;
+   spx_word32_t ac32[11], *ac32top;
+   int shift, ac_shift;
+   ac32top = ac32+lag-1;
+   int lag_1, N_lag;
+   int nshift;
+   lag_1 = lag-1;
+   N_lag = n-lag_1;
+   for (j=0;j<n;j++)
+      ac0 = ADD32(ac0,SHR32(MULT16_16(x[j],x[j]),8));
+   ac0 = ADD32(ac0,n);
+   shift = 8;
+   while (shift && ac0<0x40000000)
+   {
+      shift--;
+      ac0 <<= 1;
+   }
+   ac_shift = 18;
+   while (ac_shift && ac0<0x40000000)
+   {
+      ac_shift--;
+      ac0 <<= 1;
+   }
+   
+   xs = x+lag-1;
+   nshift = -shift;
+   __asm__ __volatile__ 
+   (
+         "P2 = %0;\n\t"
+         "I0 = P2;\n\t" /* x in I0 */
+         "B0 = P2;\n\t" /* x in B0 */
+         "R0 = %3;\n\t" /* len in R0 */
+         "P3 = %3;\n\t" /* len in R0 */
+         "P4 = %4;\n\t" /* nb_pitch in R0 */
+         "R1 = R0 << 1;\n\t" /* number of bytes in x */
+         "L0 = R1;\n\t"
+         "P0 = %1;\n\t"
+         "P1 = %2;\n\t"
+         "B1 = P1;\n\t"
+         "R4 = %5;\n\t"
+         "L1 = 0;\n\t" /*Disable looping on I1*/
+
+         "r0 = [I0++];\n\t"
+         "R2 = 0;R3=0;"
+         "LOOP pitch%= LC0 = P4 >> 1;\n\t"
+         "LOOP_BEGIN pitch%=;\n\t"
+            "I1 = P0;\n\t"
+            "A1 = A0 = 0;\n\t"
+            "R1 = [I1++];\n\t"
+            "LOOP inner_prod%= LC1 = P3 >> 1;\n\t"
+            "LOOP_BEGIN inner_prod%=;\n\t"
+               "A1 += R0.L*R1.H, A0 += R0.L*R1.L (IS) || R1.L = W[I1++];\n\t"
+               "A1 += R0.H*R1.L, A0 += R0.H*R1.H (IS) || R1.H = W[I1++] || R0 = [I0++];\n\t"
+            "LOOP_END inner_prod%=;\n\t"
+            "A0 = ASHIFT A0 by R4.L;\n\t"
+            "A1 = ASHIFT A1 by R4.L;\n\t"
+   
+            "R2 = A0, R3 = A1;\n\t"
+            "[P1--] = R2;\n\t"
+            "[P1--] = R3;\n\t"
+            "P0 += 4;\n\t"
+         "LOOP_END pitch%=;\n\t"
+   : : "m" (xs), "m" (x), "m" (ac32top), "m" (N_lag), "m" (lag_1), "m" (nshift)
+   : "A0", "A1", "P0", "P1", "P2", "P3", "P4", "R0", "R1", "R2", "R3", "R4", "I0", "I1", "L0", "L1", "B0", "B1", "memory"
+   );
+   d=0;
+   for (j=0;j<n;j++)
+   {
+      d = ADD32(d,SHR32(MULT16_16(x[j],x[j]), shift));
+   }
+   ac32[0] = d;
+   
+   for (i=0;i<lag;i++)
+   {
+      d=0;
+      for (j=i;j<lag_1;j++)
+      {
+         d = ADD32(d,SHR32(MULT16_16(x[j],x[j-i]), shift));
+      }
+      if (i)
+         ac32[i] += d;
+      ac[i] = SHR32(ac32[i], ac_shift);
+   }
+}
+

Added: freeswitch/trunk/libs/speex/libspeex/lsp.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/lsp.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,656 @@
+/*---------------------------------------------------------------------------*\
+Original copyright
+	FILE........: lsp.c
+	AUTHOR......: David Rowe
+	DATE CREATED: 24/2/93
+
+Heavily modified by Jean-Marc Valin (c) 2002-2006 (fixed-point, 
+                       optimizations, additional functions, ...)
+
+   This file contains functions for converting Linear Prediction
+   Coefficients (LPC) to Line Spectral Pair (LSP) and back. Note that the
+   LSP coefficients are not in radians format but in the x domain of the
+   unit circle.
+
+   Speex License:
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/*---------------------------------------------------------------------------*\
+
+  Introduction to Line Spectrum Pairs (LSPs)
+  ------------------------------------------
+
+  LSPs are used to encode the LPC filter coefficients {ak} for
+  transmission over the channel.  LSPs have several properties (like
+  less sensitivity to quantisation noise) that make them superior to
+  direct quantisation of {ak}.
+
+  A(z) is a polynomial of order lpcrdr with {ak} as the coefficients.
+
+  A(z) is transformed to P(z) and Q(z) (using a substitution and some
+  algebra), to obtain something like:
+
+    A(z) = 0.5[P(z)(z+z^-1) + Q(z)(z-z^-1)]  (1)
+
+  As you can imagine A(z) has complex zeros all over the z-plane. P(z)
+  and Q(z) have the very neat property of only having zeros _on_ the
+  unit circle.  So to find them we take a test point z=exp(jw) and
+  evaluate P (exp(jw)) and Q(exp(jw)) using a grid of points between 0
+  and pi.
+
+  The zeros (roots) of P(z) also happen to alternate, which is why we
+  swap coefficients as we find roots.  So the process of finding the
+  LSP frequencies is basically finding the roots of 5th order
+  polynomials.
+
+  The root so P(z) and Q(z) occur in symmetrical pairs at +/-w, hence
+  the name Line Spectrum Pairs (LSPs).
+
+  To convert back to ak we just evaluate (1), "clocking" an impulse
+  thru it lpcrdr times gives us the impulse response of A(z) which is
+  {ak}.
+
+\*---------------------------------------------------------------------------*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <math.h>
+#include "lsp.h"
+#include "stack_alloc.h"
+#include "math_approx.h"
+
+#ifndef M_PI
+#define M_PI           3.14159265358979323846  /* pi */
+#endif
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+#ifdef FIXED_POINT
+
+#define FREQ_SCALE 16384
+
+/*#define ANGLE2X(a) (32768*cos(((a)/8192.)))*/
+#define ANGLE2X(a) (SHL16(spx_cos(a),2))
+
+/*#define X2ANGLE(x) (acos(.00006103515625*(x))*LSP_SCALING)*/
+#define X2ANGLE(x) (spx_acos(x))
+
+#ifdef BFIN_ASM
+#include "lsp_bfin.h"
+#endif
+
+#else
+
+/*#define C1 0.99940307
+#define C2 -0.49558072
+#define C3 0.03679168*/
+
+#define FREQ_SCALE 1.
+#define ANGLE2X(a) (spx_cos(a))
+#define X2ANGLE(x) (acos(x))
+
+#endif
+
+
+/*---------------------------------------------------------------------------*\
+
+   FUNCTION....: cheb_poly_eva()
+
+   AUTHOR......: David Rowe
+   DATE CREATED: 24/2/93
+
+   This function evaluates a series of Chebyshev polynomials
+
+\*---------------------------------------------------------------------------*/
+
+#ifdef FIXED_POINT
+
+#ifndef OVERRIDE_CHEB_POLY_EVA
+static inline spx_word32_t cheb_poly_eva(
+  spx_word16_t *coef, /* P or Q coefs in Q13 format               */
+  spx_word16_t     x, /* cos of freq (-1.0 to 1.0) in Q14 format  */
+  int              m, /* LPC order/2                              */
+  char         *stack
+)
+{
+    int i;
+    spx_word16_t b0, b1;
+    spx_word32_t sum;
+
+    /*Prevents overflows*/
+    if (x>16383)
+       x = 16383;
+    if (x<-16383)
+       x = -16383;
+
+    /* Initialise values */
+    b1=16384;
+    b0=x;
+
+    /* Evaluate Chebyshev series formulation usin g iterative approach  */
+    sum = ADD32(EXTEND32(coef[m]), EXTEND32(MULT16_16_P14(coef[m-1],x)));
+    for(i=2;i<=m;i++)
+    {
+       spx_word16_t tmp=b0;
+       b0 = SUB16(MULT16_16_Q13(x,b0), b1);
+       b1 = tmp;
+       sum = ADD32(sum, EXTEND32(MULT16_16_P14(coef[m-i],b0)));
+    }
+    
+    return sum;
+}
+#endif
+
+#else
+
+static float cheb_poly_eva(spx_word32_t *coef, spx_word16_t x, int m, char *stack)
+{
+   int k;
+   float b0, b1, tmp;
+
+   /* Initial conditions */
+   b0=0; /* b_(m+1) */
+   b1=0; /* b_(m+2) */
+
+   x*=2;
+
+   /* Calculate the b_(k) */
+   for(k=m;k>0;k--)
+   {
+      tmp=b0;                           /* tmp holds the previous value of b0 */
+      b0=x*b0-b1+coef[m-k];    /* b0 holds its new value based on b0 and b1 */
+      b1=tmp;                           /* b1 holds the previous value of b0 */
+   }
+
+   return(-b1+.5*x*b0+coef[m]);
+}
+#endif
+
+/*---------------------------------------------------------------------------*\
+
+    FUNCTION....: lpc_to_lsp()
+
+    AUTHOR......: David Rowe
+    DATE CREATED: 24/2/93
+
+    This function converts LPC coefficients to LSP
+    coefficients.
+
+\*---------------------------------------------------------------------------*/
+
+#ifdef FIXED_POINT
+#define SIGN_CHANGE(a,b) (((a)&0x70000000)^((b)&0x70000000)||(b==0))
+#else
+#define SIGN_CHANGE(a,b) (((a)*(b))<0.0)
+#endif
+
+
+int lpc_to_lsp (spx_coef_t *a,int lpcrdr,spx_lsp_t *freq,int nb,spx_word16_t delta, char *stack)
+/*  float *a 		     	lpc coefficients			*/
+/*  int lpcrdr			order of LPC coefficients (10) 		*/
+/*  float *freq 	      	LSP frequencies in the x domain       	*/
+/*  int nb			number of sub-intervals (4) 		*/
+/*  float delta			grid spacing interval (0.02) 		*/
+
+
+{
+    spx_word16_t temp_xr,xl,xr,xm=0;
+    spx_word32_t psuml,psumr,psumm,temp_psumr/*,temp_qsumr*/;
+    int i,j,m,flag,k;
+    VARDECL(spx_word32_t *Q);                 	/* ptrs for memory allocation 		*/
+    VARDECL(spx_word32_t *P);
+    VARDECL(spx_word16_t *Q16);         /* ptrs for memory allocation 		*/
+    VARDECL(spx_word16_t *P16);
+    spx_word32_t *px;                	/* ptrs of respective P'(z) & Q'(z)	*/
+    spx_word32_t *qx;
+    spx_word32_t *p;
+    spx_word32_t *q;
+    spx_word16_t *pt;                	/* ptr used for cheb_poly_eval()
+				whether P' or Q' 			*/
+    int roots=0;              	/* DR 8/2/94: number of roots found 	*/
+    flag = 1;                	/*  program is searching for a root when,
+				1 else has found one 			*/
+    m = lpcrdr/2;            	/* order of P'(z) & Q'(z) polynomials 	*/
+
+    /* Allocate memory space for polynomials */
+    ALLOC(Q, (m+1), spx_word32_t);
+    ALLOC(P, (m+1), spx_word32_t);
+
+    /* determine P'(z)'s and Q'(z)'s coefficients where
+      P'(z) = P(z)/(1 + z^(-1)) and Q'(z) = Q(z)/(1-z^(-1)) */
+
+    px = P;                      /* initialise ptrs 			*/
+    qx = Q;
+    p = px;
+    q = qx;
+
+#ifdef FIXED_POINT
+    *px++ = LPC_SCALING;
+    *qx++ = LPC_SCALING;
+    for(i=0;i<m;i++){
+       *px++ = SUB32(ADD32(EXTEND32(a[i]),EXTEND32(a[lpcrdr-i-1])), *p++);
+       *qx++ = ADD32(SUB32(EXTEND32(a[i]),EXTEND32(a[lpcrdr-i-1])), *q++);
+    }
+    px = P;
+    qx = Q;
+    for(i=0;i<m;i++)
+    {
+       /*if (fabs(*px)>=32768)
+          speex_warning_int("px", *px);
+       if (fabs(*qx)>=32768)
+       speex_warning_int("qx", *qx);*/
+       *px = PSHR32(*px,2);
+       *qx = PSHR32(*qx,2);
+       px++;
+       qx++;
+    }
+    /* The reason for this lies in the way cheb_poly_eva() is implemented for fixed-point */
+    P[m] = PSHR32(P[m],3);
+    Q[m] = PSHR32(Q[m],3);
+#else
+    *px++ = LPC_SCALING;
+    *qx++ = LPC_SCALING;
+    for(i=0;i<m;i++){
+       *px++ = (a[i]+a[lpcrdr-1-i]) - *p++;
+       *qx++ = (a[i]-a[lpcrdr-1-i]) + *q++;
+    }
+    px = P;
+    qx = Q;
+    for(i=0;i<m;i++){
+       *px = 2**px;
+       *qx = 2**qx;
+       px++;
+       qx++;
+    }
+#endif
+
+    px = P;             	/* re-initialise ptrs 			*/
+    qx = Q;
+
+    /* now that we have computed P and Q convert to 16 bits to
+       speed up cheb_poly_eval */
+
+    ALLOC(P16, m+1, spx_word16_t);
+    ALLOC(Q16, m+1, spx_word16_t);
+
+    for (i=0;i<m+1;i++)
+    {
+       P16[i] = P[i];
+       Q16[i] = Q[i];
+    }
+
+    /* Search for a zero in P'(z) polynomial first and then alternate to Q'(z).
+    Keep alternating between the two polynomials as each zero is found 	*/
+
+    xr = 0;             	/* initialise xr to zero 		*/
+    xl = FREQ_SCALE;               	/* start at point xl = 1 		*/
+
+    for(j=0;j<lpcrdr;j++){
+	if(j&1)            	/* determines whether P' or Q' is eval. */
+	    pt = Q16;
+	else
+	    pt = P16;
+
+	psuml = cheb_poly_eva(pt,xl,m,stack);	/* evals poly. at xl 	*/
+	flag = 1;
+	while(flag && (xr >= -FREQ_SCALE)){
+           spx_word16_t dd;
+           /* Modified by JMV to provide smaller steps around x=+-1 */
+#ifdef FIXED_POINT
+           dd = MULT16_16_Q15(delta,SUB16(FREQ_SCALE, MULT16_16_Q14(MULT16_16_Q14(xl,xl),14000)));
+           if (psuml<512 && psuml>-512)
+              dd = PSHR16(dd,1);
+#else
+           dd=delta*(1-.9*xl*xl);
+           if (fabs(psuml)<.2)
+              dd *= .5;
+#endif
+           xr = SUB16(xl, dd);                        	/* interval spacing 	*/
+	    psumr = cheb_poly_eva(pt,xr,m,stack);/* poly(xl-delta_x) 	*/
+	    temp_psumr = psumr;
+	    temp_xr = xr;
+
+    /* if no sign change increment xr and re-evaluate poly(xr). Repeat til
+    sign change.
+    if a sign change has occurred the interval is bisected and then
+    checked again for a sign change which determines in which
+    interval the zero lies in.
+    If there is no sign change between poly(xm) and poly(xl) set interval
+    between xm and xr else set interval between xl and xr and repeat till
+    root is located within the specified limits 			*/
+
+	    if(SIGN_CHANGE(psumr,psuml))
+            {
+		roots++;
+
+		psumm=psuml;
+		for(k=0;k<=nb;k++){
+#ifdef FIXED_POINT
+		    xm = ADD16(PSHR16(xl,1),PSHR16(xr,1));        	/* bisect the interval 	*/
+#else
+                    xm = .5*(xl+xr);        	/* bisect the interval 	*/
+#endif
+		    psumm=cheb_poly_eva(pt,xm,m,stack);
+		    /*if(psumm*psuml>0.)*/
+		    if(!SIGN_CHANGE(psumm,psuml))
+                    {
+			psuml=psumm;
+			xl=xm;
+		    } else {
+			psumr=psumm;
+			xr=xm;
+		    }
+		}
+
+	       /* once zero is found, reset initial interval to xr 	*/
+	       freq[j] = X2ANGLE(xm);
+	       xl = xm;
+	       flag = 0;       		/* reset flag for next search 	*/
+	    }
+	    else{
+		psuml=temp_psumr;
+		xl=temp_xr;
+	    }
+	}
+    }
+    return(roots);
+}
+
+/*---------------------------------------------------------------------------*\
+
+	FUNCTION....: lsp_to_lpc()
+
+	AUTHOR......: David Rowe
+	DATE CREATED: 24/2/93
+
+        Converts LSP coefficients to LPC coefficients.
+
+\*---------------------------------------------------------------------------*/
+
+#ifdef FIXED_POINT
+
+void lsp_to_lpc(spx_lsp_t *freq,spx_coef_t *ak,int lpcrdr, char *stack)
+/*  float *freq 	array of LSP frequencies in the x domain	*/
+/*  float *ak 		array of LPC coefficients 			*/
+/*  int lpcrdr  	order of LPC coefficients 			*/
+{
+    int i,j;
+    spx_word32_t xout1,xout2,xin;
+    spx_word32_t mult, a;
+    VARDECL(spx_word16_t *freqn);
+    VARDECL(spx_word32_t **xp);
+    VARDECL(spx_word32_t *xpmem);
+    VARDECL(spx_word32_t **xq);
+    VARDECL(spx_word32_t *xqmem);
+    int m = lpcrdr>>1;
+
+    /* 
+    
+       Reconstruct P(z) and Q(z) by cascading second order polynomials
+       in form 1 - 2cos(w)z(-1) + z(-2), where w is the LSP frequency.
+       In the time domain this is:
+
+       y(n) = x(n) - 2cos(w)x(n-1) + x(n-2)
+    
+       This is what the ALLOCS below are trying to do:
+
+         int xp[m+1][lpcrdr+1+2]; // P matrix in QIMP
+         int xq[m+1][lpcrdr+1+2]; // Q matrix in QIMP
+
+       These matrices store the output of each stage on each row.  The
+       final (m-th) row has the output of the final (m-th) cascaded
+       2nd order filter.  The first row is the impulse input to the
+       system (not written as it is known).
+
+       The version below takes advantage of the fact that a lot of the
+       outputs are zero or known, for example if we put an inpulse
+       into the first section the "clock" it 10 times only the first 3
+       outputs samples are non-zero (it's an FIR filter).
+    */
+
+    ALLOC(xp, (m+1), spx_word32_t*);
+    ALLOC(xpmem, (m+1)*(lpcrdr+1+2), spx_word32_t);
+
+    ALLOC(xq, (m+1), spx_word32_t*);
+    ALLOC(xqmem, (m+1)*(lpcrdr+1+2), spx_word32_t);
+    
+    for(i=0; i<=m; i++) {
+      xp[i] = xpmem + i*(lpcrdr+1+2);
+      xq[i] = xqmem + i*(lpcrdr+1+2);
+    }
+
+    /* work out 2cos terms in Q14 */
+
+    ALLOC(freqn, lpcrdr, spx_word16_t);
+    for (i=0;i<lpcrdr;i++) 
+       freqn[i] = ANGLE2X(freq[i]);
+
+    #define QIMP  21   /* scaling for impulse */
+
+    xin = SHL32(EXTEND32(1), (QIMP-1)); /* 0.5 in QIMP format */
+   
+    /* first col and last non-zero values of each row are trivial */
+    
+    for(i=0;i<=m;i++) {
+     xp[i][1] = 0;
+     xp[i][2] = xin;
+     xp[i][2+2*i] = xin;
+     xq[i][1] = 0;
+     xq[i][2] = xin;
+     xq[i][2+2*i] = xin;
+    }
+
+    /* 2nd row (first output row) is trivial */
+
+    xp[1][3] = -MULT16_32_Q14(freqn[0],xp[0][2]);
+    xq[1][3] = -MULT16_32_Q14(freqn[1],xq[0][2]);
+
+    xout1 = xout2 = 0;
+
+    /* now generate remaining rows */
+
+    for(i=1;i<m;i++) {
+
+      for(j=1;j<2*(i+1)-1;j++) {
+	mult = MULT16_32_Q14(freqn[2*i],xp[i][j+1]);
+	xp[i+1][j+2] = ADD32(SUB32(xp[i][j+2], mult), xp[i][j]);
+	mult = MULT16_32_Q14(freqn[2*i+1],xq[i][j+1]);
+	xq[i+1][j+2] = ADD32(SUB32(xq[i][j+2], mult), xq[i][j]);
+      }
+
+      /* for last col xp[i][j+2] = xq[i][j+2] = 0 */
+
+      mult = MULT16_32_Q14(freqn[2*i],xp[i][j+1]);
+      xp[i+1][j+2] = SUB32(xp[i][j], mult);
+      mult = MULT16_32_Q14(freqn[2*i+1],xq[i][j+1]);
+      xq[i+1][j+2] = SUB32(xq[i][j], mult);
+    }
+
+    /* process last row to extra a{k} */
+
+    for(j=1;j<=lpcrdr;j++) {
+      int shift = QIMP-13;
+
+      /* final filter sections */
+      a = PSHR32(xp[m][j+2] + xout1 + xq[m][j+2] - xout2, shift); 
+      xout1 = xp[m][j+2];
+      xout2 = xq[m][j+2];
+      
+      /* hard limit ak's to +/- 32767 */
+
+      if (a < -32767) a = 32767;
+      if (a > 32767) a = 32767;
+      ak[j-1] = (short)a;
+     
+    }
+
+}
+
+#else
+
+void lsp_to_lpc(spx_lsp_t *freq,spx_coef_t *ak,int lpcrdr, char *stack)
+/*  float *freq 	array of LSP frequencies in the x domain	*/
+/*  float *ak 		array of LPC coefficients 			*/
+/*  int lpcrdr  	order of LPC coefficients 			*/
+
+
+{
+    int i,j;
+    float xout1,xout2,xin1,xin2;
+    VARDECL(float *Wp);
+    float *pw,*n1,*n2,*n3,*n4=NULL;
+    VARDECL(float *x_freq);
+    int m = lpcrdr>>1;
+
+    ALLOC(Wp, 4*m+2, float);
+    pw = Wp;
+
+    /* initialise contents of array */
+
+    for(i=0;i<=4*m+1;i++){       	/* set contents of buffer to 0 */
+	*pw++ = 0.0;
+    }
+
+    /* Set pointers up */
+
+    pw = Wp;
+    xin1 = 1.0;
+    xin2 = 1.0;
+
+    ALLOC(x_freq, lpcrdr, float);
+    for (i=0;i<lpcrdr;i++)
+       x_freq[i] = ANGLE2X(freq[i]);
+
+    /* reconstruct P(z) and Q(z) by  cascading second order
+      polynomials in form 1 - 2xz(-1) +z(-2), where x is the
+      LSP coefficient */
+
+    for(j=0;j<=lpcrdr;j++){
+       int i2=0;
+	for(i=0;i<m;i++,i2+=2){
+	    n1 = pw+(i*4);
+	    n2 = n1 + 1;
+	    n3 = n2 + 1;
+	    n4 = n3 + 1;
+	    xout1 = xin1 - 2.f*x_freq[i2] * *n1 + *n2;
+	    xout2 = xin2 - 2.f*x_freq[i2+1] * *n3 + *n4;
+	    *n2 = *n1;
+	    *n4 = *n3;
+	    *n1 = xin1;
+	    *n3 = xin2;
+	    xin1 = xout1;
+	    xin2 = xout2;
+	}
+	xout1 = xin1 + *(n4+1);
+	xout2 = xin2 - *(n4+2);
+	if (j>0)
+	   ak[j-1] = (xout1 + xout2)*0.5f;
+	*(n4+1) = xin1;
+	*(n4+2) = xin2;
+
+	xin1 = 0.0;
+	xin2 = 0.0;
+    }
+
+}
+#endif
+
+
+#ifdef FIXED_POINT
+
+/*Makes sure the LSPs are stable*/
+void lsp_enforce_margin(spx_lsp_t *lsp, int len, spx_word16_t margin)
+{
+   int i;
+   spx_word16_t m = margin;
+   spx_word16_t m2 = 25736-margin;
+  
+   if (lsp[0]<m)
+      lsp[0]=m;
+   if (lsp[len-1]>m2)
+      lsp[len-1]=m2;
+   for (i=1;i<len-1;i++)
+   {
+      if (lsp[i]<lsp[i-1]+m)
+         lsp[i]=lsp[i-1]+m;
+
+      if (lsp[i]>lsp[i+1]-m)
+         lsp[i]= SHR16(lsp[i],1) + SHR16(lsp[i+1]-m,1);
+   }
+}
+
+
+void lsp_interpolate(spx_lsp_t *old_lsp, spx_lsp_t *new_lsp, spx_lsp_t *interp_lsp, int len, int subframe, int nb_subframes)
+{
+   int i;
+   spx_word16_t tmp = DIV32_16(SHL32(EXTEND32(1 + subframe),14),nb_subframes);
+   spx_word16_t tmp2 = 16384-tmp;
+   for (i=0;i<len;i++)
+   {
+      interp_lsp[i] = MULT16_16_P14(tmp2,old_lsp[i]) + MULT16_16_P14(tmp,new_lsp[i]);
+   }
+}
+
+#else
+
+/*Makes sure the LSPs are stable*/
+void lsp_enforce_margin(spx_lsp_t *lsp, int len, spx_word16_t margin)
+{
+   int i;
+   if (lsp[0]<LSP_SCALING*margin)
+      lsp[0]=LSP_SCALING*margin;
+   if (lsp[len-1]>LSP_SCALING*(M_PI-margin))
+      lsp[len-1]=LSP_SCALING*(M_PI-margin);
+   for (i=1;i<len-1;i++)
+   {
+      if (lsp[i]<lsp[i-1]+LSP_SCALING*margin)
+         lsp[i]=lsp[i-1]+LSP_SCALING*margin;
+
+      if (lsp[i]>lsp[i+1]-LSP_SCALING*margin)
+         lsp[i]= .5f* (lsp[i] + lsp[i+1]-LSP_SCALING*margin);
+   }
+}
+
+
+void lsp_interpolate(spx_lsp_t *old_lsp, spx_lsp_t *new_lsp, spx_lsp_t *interp_lsp, int len, int subframe, int nb_subframes)
+{
+   int i;
+   float tmp = (1.0f + subframe)/nb_subframes;
+   for (i=0;i<len;i++)
+   {
+      interp_lsp[i] = (1-tmp)*old_lsp[i] + tmp*new_lsp[i];
+   }
+}
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/lsp.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/lsp.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,64 @@
+/*---------------------------------------------------------------------------*\
+Original Copyright
+	FILE........: AK2LSPD.H
+	TYPE........: Turbo C header file
+	COMPANY.....: Voicetronix
+	AUTHOR......: James Whitehall
+	DATE CREATED: 21/11/95
+
+Modified by Jean-Marc Valin
+
+    This file contains functions for converting Linear Prediction
+    Coefficients (LPC) to Line Spectral Pair (LSP) and back. Note that the
+    LSP coefficients are not in radians format but in the x domain of the
+    unit circle.
+
+\*---------------------------------------------------------------------------*/
+/**
+   @file lsp.h
+   @brief Line Spectral Pair (LSP) functions.
+*/
+/* Speex License:
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef __AK2LSPD__
+#define __AK2LSPD__
+
+#include "misc.h"
+
+int lpc_to_lsp (spx_coef_t *a, int lpcrdr, spx_lsp_t *freq, int nb, spx_word16_t delta, char *stack);
+void lsp_to_lpc(spx_lsp_t *freq, spx_coef_t *ak, int lpcrdr, char *stack);
+
+/*Added by JMV*/
+void lsp_enforce_margin(spx_lsp_t *lsp, int len, spx_word16_t margin);
+
+void lsp_interpolate(spx_lsp_t *old_lsp, spx_lsp_t *new_lsp, spx_lsp_t *interp_lsp, int len, int subframe, int nb_subframes);
+
+#endif	/* __AK2LSPD__ */

Added: freeswitch/trunk/libs/speex/libspeex/lsp_bfin.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/lsp_bfin.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,89 @@
+/* Copyright (C) 2006 David Rowe */
+/**
+   @file lsp_bfin.h
+   @author David Rowe
+   @brief LSP routines optimised for the Blackfin
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#define OVERRIDE_CHEB_POLY_EVA
+#ifdef OVERRIDE_CHEB_POLY_EVA
+static inline spx_word32_t cheb_poly_eva(
+  spx_word16_t *coef, /* P or Q coefs in Q13 format               */
+  spx_word16_t     x, /* cos of freq (-1.0 to 1.0) in Q14 format  */
+  int              m, /* LPC order/2                              */
+  char         *stack
+)
+{
+    spx_word32_t sum;
+
+   __asm__ __volatile__
+     (
+      "P0 = %2;\n\t"           /* P0: coef[m], coef[m-1],..., coef[0] */
+      "R4 = 8192;\n\t"         /* R4: rounding constant               */
+      "R2 = %1;\n\t"           /* R2: x  */
+
+      "R5 = -16383;\n\t"
+      "R2 = MAX(R2,R5);\n\t"
+      "R5 = 16383;\n\t"
+      "R2 = MIN(R2,R5);\n\t"
+
+      "R3 = W[P0--] (X);\n\t"  /* R3: sum */
+      "R5 = W[P0--] (X);\n\t"
+      "R5 = R5.L * R2.L (IS);\n\t"
+      "R5 = R5 + R4;\n\t"
+      "R5 >>>= 14;\n\t"
+      "R3 = R3 + R5;\n\t" 
+      
+      "R0 = R2;\n\t"           /* R0: b0 */
+      "R1 = 16384;\n\t"        /* R1: b1 */
+      "LOOP cpe%= LC0 = %3;\n\t"
+      "LOOP_BEGIN cpe%=;\n\t"
+        "P1 = R0;\n\t" 
+        "R0 = R2.L * R0.L (IS) || R5 = W[P0--] (X);\n\t"
+        "R0 >>>= 13;\n\t"
+        "R0 = R0 - R1;\n\t"
+        "R1 = P1;\n\t"
+        "R5 = R5.L * R0.L (IS);\n\t"
+        "R5 = R5 + R4;\n\t"
+        "R5 >>>= 14;\n\t"
+        "R3 = R3 + R5;\n\t"
+      "LOOP_END cpe%=;\n\t"
+      "%0 = R3;\n\t"
+      : "=&d" (sum)
+      : "a" (x), "a" (&coef[m]), "a" (m-1)
+      : "R0", "R1", "R3", "R2", "R4", "R5", "P0", "P1"
+      );
+    return sum;
+}
+#endif
+
+
+

Added: freeswitch/trunk/libs/speex/libspeex/lsp_tables_nb.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/lsp_tables_nb.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,360 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: lsp_tables_nb.c
+   Codebooks for LSPs in narrowband CELP mode
+  
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are
+   met:
+
+   1. Redistributions of source code must retain the above copyright notice,
+   this list of conditions and the following disclaimer.  
+
+   2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   3. The name of the author may not be used to endorse or promote products
+   derived from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+   DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+   ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+*/
+
+const signed char cdbk_nb[640]={
+30,19,38,34,40,32,46,43,58,43,
+5,-18,-25,-40,-33,-55,-52,20,34,28,
+-20,-63,-97,-92,61,53,47,49,53,75,
+-14,-53,-77,-79,0,-3,-5,19,22,26,
+-9,-53,-55,66,90,72,85,68,74,52,
+-4,-41,-58,-31,-18,-31,27,32,30,18,
+24,3,8,5,-12,-3,26,28,74,63,
+-2,-39,-67,-77,-106,-74,59,59,73,65,
+44,40,71,72,82,83,98,88,89,60,
+-6,-31,-47,-48,-13,-39,-9,7,2,79,
+-1,-39,-60,-17,87,81,65,50,45,19,
+-21,-67,-91,-87,-41,-50,7,18,39,74,
+10,-31,-28,39,24,13,23,5,56,45,
+29,10,-5,-13,-11,-35,-18,-8,-10,-8,
+-25,-71,-77,-21,2,16,50,63,87,87,
+5,-32,-40,-51,-68,0,12,6,54,34,
+5,-12,32,52,68,64,69,59,65,45,
+14,-16,-31,-40,-65,-67,41,49,47,37,
+-11,-52,-75,-84,-4,57,48,42,42,33,
+-11,-51,-68,-6,13,0,8,-8,26,32,
+-23,-53,0,36,56,76,97,105,111,97,
+-1,-28,-39,-40,-43,-54,-44,-40,-18,35,
+16,-20,-19,-28,-42,29,47,38,74,45,
+3,-29,-48,-62,-80,-104,-33,56,59,59,
+10,17,46,72,84,101,117,123,123,106,
+-7,-33,-49,-51,-70,-67,-27,-31,70,67,
+-16,-62,-85,-20,82,71,86,80,85,74,
+-19,-58,-75,-45,-29,-33,-18,-25,45,57,
+-12,-42,-5,12,28,36,52,64,81,82,
+13,-9,-27,-28,22,3,2,22,26,6,
+-6,-44,-51,2,15,10,48,43,49,34,
+-19,-62,-84,-89,-102,-24,8,17,61,68,
+39,24,23,19,16,-5,12,15,27,15,
+-8,-44,-49,-60,-18,-32,-28,52,54,62,
+-8,-48,-77,-70,66,101,83,63,61,37,
+-12,-50,-75,-64,33,17,13,25,15,77,
+1,-42,-29,72,64,46,49,31,61,44,
+-8,-47,-54,-46,-30,19,20,-1,-16,0,
+16,-12,-18,-9,-26,-27,-10,-22,53,45,
+-10,-47,-75,-82,-105,-109,8,25,49,77,
+50,65,114,117,124,118,115,96,90,61,
+-9,-45,-63,-60,-75,-57,8,11,20,29,
+0,-35,-49,-43,40,47,35,40,55,38,
+-24,-76,-103,-112,-27,3,23,34,52,75,
+8,-29,-43,12,63,38,35,29,24,8,
+25,11,1,-15,-18,-43,-7,37,40,21,
+-20,-56,-19,-19,-4,-2,11,29,51,63,
+-2,-44,-62,-75,-89,30,57,51,74,51,
+50,46,68,64,65,52,63,55,65,43,
+18,-9,-26,-35,-55,-69,3,6,8,17,
+-15,-61,-86,-97,1,86,93,74,78,67,
+-1,-38,-66,-48,48,39,29,25,17,-1,
+13,13,29,39,50,51,69,82,97,98,
+-2,-36,-46,-27,-16,-30,-13,-4,-7,-4,
+25,-5,-11,-6,-25,-21,33,12,31,29,
+-8,-38,-52,-63,-68,-89,-33,-1,10,74,
+-2,-15,59,91,105,105,101,87,84,62,
+-7,-33,-50,-35,-54,-47,25,17,82,81,
+-13,-56,-83,21,58,31,42,25,72,65,
+-24,-66,-91,-56,9,-2,21,10,69,75,
+2,-24,11,22,25,28,38,34,48,33,
+7,-29,-26,17,15,-1,14,0,-2,0,
+-6,-41,-67,6,-2,-9,19,2,85,74,
+-22,-67,-84,-71,-50,3,11,-9,2,62};
+
+const signed char cdbk_nb_low1[320]={
+-34,-52,-15,45,2,
+23,21,52,24,-33,
+-9,-1,9,-44,-41,
+-13,-17,44,22,-17,
+-6,-4,-1,22,38,
+26,16,2,50,27,
+-35,-34,-9,-41,6,
+0,-16,-34,51,8,
+-14,-31,-49,15,-33,
+45,49,33,-11,-37,
+-62,-54,45,11,-5,
+-72,11,-1,-12,-11,
+24,27,-11,-43,46,
+43,33,-12,-9,-1,
+1,-4,-23,-57,-71,
+11,8,16,17,-8,
+-20,-31,-41,53,48,
+-16,3,65,-24,-8,
+-23,-32,-37,-32,-49,
+-10,-17,6,38,5,
+-9,-17,-46,8,52,
+3,6,45,40,39,
+-7,-6,-34,-74,31,
+8,1,-16,43,68,
+-11,-19,-31,4,6,
+0,-6,-17,-16,-38,
+-16,-30,2,9,-39,
+-16,-1,43,-10,48,
+3,3,-16,-31,-3,
+62,68,43,13,3,
+-10,8,20,-56,12,
+12,-2,-18,22,-15,
+-40,-36,1,7,41,
+0,1,46,-6,-62,
+-4,-12,-2,-11,-83,
+-13,-2,91,33,-10,
+0,4,-11,-16,79,
+32,37,14,9,51,
+-21,-28,-56,-34,0,
+21,9,-26,11,28,
+-42,-54,-23,-2,-15,
+31,30,8,-39,-66,
+-39,-36,31,-28,-40,
+-46,35,40,22,24,
+33,48,23,-34,14,
+40,32,17,27,-3,
+25,26,-13,-61,-17,
+11,4,31,60,-6,
+-26,-41,-64,13,16,
+-26,54,31,-11,-23,
+-9,-11,-34,-71,-21,
+-34,-35,55,50,29,
+-22,-27,-50,-38,57,
+33,42,57,48,26,
+11,0,-49,-31,26,
+-4,-14,5,78,37,
+17,0,-49,-12,-23,
+26,14,2,2,-43,
+-17,-12,10,-8,-4,
+8,18,12,-6,20,
+-12,-6,-13,-25,34,
+15,40,49,7,8,
+13,20,20,-19,-22,
+-2,-8,2,51,-51};
+
+const signed char cdbk_nb_low2[320]={
+-6,53,-21,-24,4,
+26,17,-4,-37,25,
+17,-36,-13,31,3,
+-6,27,15,-10,31,
+28,26,-10,-10,-40,
+16,-7,15,13,41,
+-9,0,-4,50,-6,
+-7,14,38,22,0,
+-48,2,1,-13,-19,
+32,-3,-60,11,-17,
+-1,-24,-34,-1,35,
+-5,-27,28,44,13,
+25,15,42,-11,15,
+51,35,-36,20,8,
+-4,-12,-29,19,-47,
+49,-15,-4,16,-29,
+-39,14,-30,4,25,
+-9,-5,-51,-14,-3,
+-40,-32,38,5,-9,
+-8,-4,-1,-22,71,
+-3,14,26,-18,-22,
+24,-41,-25,-24,6,
+23,19,-10,39,-26,
+-27,65,45,2,-7,
+-26,-8,22,-12,16,
+15,16,-35,-5,33,
+-21,-8,0,23,33,
+34,6,21,36,6,
+-7,-22,8,-37,-14,
+31,38,11,-4,-3,
+-39,-32,-8,32,-23,
+-6,-12,16,20,-28,
+-4,23,13,-52,-1,
+22,6,-33,-40,-6,
+4,-62,13,5,-26,
+35,39,11,2,57,
+-11,9,-20,-28,-33,
+52,-5,-6,-2,22,
+-14,-16,-48,35,1,
+-58,20,13,33,-1,
+-74,56,-18,-22,-31,
+12,6,-14,4,-2,
+-9,-47,10,-3,29,
+-17,-5,61,14,47,
+-12,2,72,-39,-17,
+92,64,-53,-51,-15,
+-30,-38,-41,-29,-28,
+27,9,36,9,-35,
+-42,81,-21,20,25,
+-16,-5,-17,-35,21,
+15,-28,48,2,-2,
+9,-19,29,-40,30,
+-18,-18,18,-16,-57,
+15,-20,-12,-15,-37,
+-15,33,-39,21,-22,
+-13,35,11,13,-38,
+-63,29,23,-27,32,
+18,3,-26,42,33,
+-64,-66,-17,16,56,
+2,36,3,31,21,
+-41,-39,8,-57,14,
+37,-2,19,-36,-19,
+-23,-29,-16,1,-3,
+-8,-10,31,64,-65};
+
+const signed char cdbk_nb_high1[320]={
+-26,-8,29,21,4,
+19,-39,33,-7,-36,
+56,54,48,40,29,
+-4,-24,-42,-66,-43,
+-60,19,-2,37,41,
+-10,-37,-60,-64,18,
+-22,77,73,40,25,
+4,19,-19,-66,-2,
+11,5,21,14,26,
+-25,-86,-4,18,1,
+26,-37,10,37,-1,
+24,-12,-59,-11,20,
+-6,34,-16,-16,42,
+19,-28,-51,53,32,
+4,10,62,21,-12,
+-34,27,4,-48,-48,
+-50,-49,31,-7,-21,
+-42,-25,-4,-43,-22,
+59,2,27,12,-9,
+-6,-16,-8,-32,-58,
+-16,-29,-5,41,23,
+-30,-33,-46,-13,-10,
+-38,52,52,1,-17,
+-9,10,26,-25,-6,
+33,-20,53,55,25,
+-32,-5,-42,23,21,
+66,5,-28,20,9,
+75,29,-7,-42,-39,
+15,3,-23,21,6,
+11,1,-29,14,63,
+10,54,26,-24,-51,
+-49,7,-23,-51,15,
+-66,1,60,25,10,
+0,-30,-4,-15,17,
+19,59,40,4,-5,
+33,6,-22,-58,-70,
+-5,23,-6,60,44,
+-29,-16,-47,-29,52,
+-19,50,28,16,35,
+31,36,0,-21,6,
+21,27,22,42,7,
+-66,-40,-8,7,19,
+46,0,-4,60,36,
+45,-7,-29,-6,-32,
+-39,2,6,-9,33,
+20,-51,-34,18,-6,
+19,6,11,5,-19,
+-29,-2,42,-11,-45,
+-21,-55,57,37,2,
+-14,-67,-16,-27,-38,
+69,48,19,2,-17,
+20,-20,-16,-34,-17,
+-25,-61,10,73,45,
+16,-40,-64,-17,-29,
+-22,56,17,-39,8,
+-11,8,-25,-18,-13,
+-19,8,54,57,36,
+-17,-26,-4,6,-21,
+40,42,-4,20,31,
+53,10,-34,-53,31,
+-17,35,0,15,-6,
+-20,-63,-73,22,25,
+29,17,8,-29,-39,
+-69,18,15,-15,-5};
+
+const signed char cdbk_nb_high2[320]={
+11,47,16,-9,-46,
+-32,26,-64,34,-5,
+38,-7,47,20,2,
+-73,-99,-3,-45,20,
+70,-52,15,-6,-7,
+-82,31,21,47,51,
+39,-3,9,0,-41,
+-7,-15,-54,2,0,
+27,-31,9,-45,-22,
+-38,-24,-24,8,-33,
+23,5,50,-36,-17,
+-18,-51,-2,13,19,
+43,12,-15,-12,61,
+38,38,7,13,0,
+6,-1,3,62,9,
+27,22,-33,38,-35,
+-9,30,-43,-9,-32,
+-1,4,-4,1,-5,
+-11,-8,38,31,11,
+-10,-42,-21,-37,1,
+43,15,-13,-35,-19,
+-18,15,23,-26,59,
+1,-21,53,8,-41,
+-50,-14,-28,4,21,
+25,-28,-40,5,-40,
+-41,4,51,-33,-8,
+-8,1,17,-60,12,
+25,-41,17,34,43,
+19,45,7,-37,24,
+-15,56,-2,35,-10,
+48,4,-47,-2,5,
+-5,-54,5,-3,-33,
+-10,30,-2,-44,-24,
+-38,9,-9,42,4,
+6,-56,44,-16,9,
+-40,-26,18,-20,10,
+28,-41,-21,-4,13,
+-18,32,-30,-3,37,
+15,22,28,50,-40,
+3,-29,-64,7,51,
+-19,-11,17,-27,-40,
+-64,24,-12,-7,-27,
+3,37,48,-1,2,
+-9,-38,-34,46,1,
+27,-6,19,-13,26,
+10,34,20,25,40,
+50,-6,-7,30,9,
+-24,0,-23,71,-61,
+22,58,-34,-4,2,
+-49,-33,25,30,-8,
+-6,-16,77,2,38,
+-8,-35,-6,-30,56,
+78,31,33,-20,13,
+-39,20,22,4,21,
+-8,4,-6,10,-83,
+-41,9,-25,-43,15,
+-7,-12,-34,-39,-37,
+-33,19,30,16,-33,
+42,-25,25,-68,44,
+-15,-11,-4,23,50,
+14,4,-39,-43,20,
+-30,60,9,-20,7,
+16,19,-33,37,29,
+16,-35,7,38,-27};

Added: freeswitch/trunk/libs/speex/libspeex/ltp.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/ltp.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,778 @@
+/* Copyright (C) 2002-2006 Jean-Marc Valin 
+   File: ltp.c
+   Long-Term Prediction functions
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <math.h>
+#include "ltp.h"
+#include "stack_alloc.h"
+#include "filters.h"
+#include <speex/speex_bits.h>
+#include "math_approx.h"
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+
+#ifdef _USE_SSE
+#include "ltp_sse.h"
+#elif defined (ARM4_ASM) || defined(ARM5E_ASM)
+#include "ltp_arm4.h"
+#elif defined (BFIN_ASM)
+#include "ltp_bfin.h"
+#endif
+
+#ifndef OVERRIDE_INNER_PROD
+spx_word32_t inner_prod(const spx_word16_t *x, const spx_word16_t *y, int len)
+{
+   spx_word32_t sum=0;
+   len >>= 2;
+   while(len--)
+   {
+      spx_word32_t part=0;
+      part = MAC16_16(part,*x++,*y++);
+      part = MAC16_16(part,*x++,*y++);
+      part = MAC16_16(part,*x++,*y++);
+      part = MAC16_16(part,*x++,*y++);
+      /* HINT: If you had a 40-bit accumulator, you could shift only at the end */
+      sum = ADD32(sum,SHR32(part,6));
+   }
+   return sum;
+}
+#endif
+
+#ifndef OVERRIDE_PITCH_XCORR
+#if 0 /* HINT: Enable this for machines with enough registers (i.e. not x86) */
+void pitch_xcorr(const spx_word16_t *_x, const spx_word16_t *_y, spx_word32_t *corr, int len, int nb_pitch, char *stack)
+{
+   int i,j;
+   for (i=0;i<nb_pitch;i+=4)
+   {
+      /* Compute correlation*/
+      /*corr[nb_pitch-1-i]=inner_prod(x, _y+i, len);*/
+      spx_word32_t sum1=0;
+      spx_word32_t sum2=0;
+      spx_word32_t sum3=0;
+      spx_word32_t sum4=0;
+      const spx_word16_t *y = _y+i;
+      const spx_word16_t *x = _x;
+      spx_word16_t y0, y1, y2, y3;
+      /*y0=y[0];y1=y[1];y2=y[2];y3=y[3];*/
+      y0=*y++;
+      y1=*y++;
+      y2=*y++;
+      y3=*y++;
+      for (j=0;j<len;j+=4)
+      {
+         spx_word32_t part1;
+         spx_word32_t part2;
+         spx_word32_t part3;
+         spx_word32_t part4;
+         part1 = MULT16_16(*x,y0);
+         part2 = MULT16_16(*x,y1);
+         part3 = MULT16_16(*x,y2);
+         part4 = MULT16_16(*x,y3);
+         x++;
+         y0=*y++;
+         part1 = MAC16_16(part1,*x,y1);
+         part2 = MAC16_16(part2,*x,y2);
+         part3 = MAC16_16(part3,*x,y3);
+         part4 = MAC16_16(part4,*x,y0);
+         x++;
+         y1=*y++;
+         part1 = MAC16_16(part1,*x,y2);
+         part2 = MAC16_16(part2,*x,y3);
+         part3 = MAC16_16(part3,*x,y0);
+         part4 = MAC16_16(part4,*x,y1);
+         x++;
+         y2=*y++;
+         part1 = MAC16_16(part1,*x,y3);
+         part2 = MAC16_16(part2,*x,y0);
+         part3 = MAC16_16(part3,*x,y1);
+         part4 = MAC16_16(part4,*x,y2);
+         x++;
+         y3=*y++;
+         
+         sum1 = ADD32(sum1,SHR32(part1,6));
+         sum2 = ADD32(sum2,SHR32(part2,6));
+         sum3 = ADD32(sum3,SHR32(part3,6));
+         sum4 = ADD32(sum4,SHR32(part4,6));
+      }
+      corr[nb_pitch-1-i]=sum1;
+      corr[nb_pitch-2-i]=sum2;
+      corr[nb_pitch-3-i]=sum3;
+      corr[nb_pitch-4-i]=sum4;
+   }
+
+}
+#else
+void pitch_xcorr(const spx_word16_t *_x, const spx_word16_t *_y, spx_word32_t *corr, int len, int nb_pitch, char *stack)
+{
+   int i;
+   for (i=0;i<nb_pitch;i++)
+   {
+      /* Compute correlation*/
+      corr[nb_pitch-1-i]=inner_prod(_x, _y+i, len);
+   }
+
+}
+#endif
+#endif
+
+#ifndef OVERRIDE_COMPUTE_PITCH_ERROR
+static inline spx_word32_t compute_pitch_error(spx_word16_t *C, spx_word16_t *g, spx_word16_t pitch_control)
+{
+   spx_word32_t sum = 0;
+   sum = ADD32(sum,MULT16_16(MULT16_16_16(g[0],pitch_control),C[0]));
+   sum = ADD32(sum,MULT16_16(MULT16_16_16(g[1],pitch_control),C[1]));
+   sum = ADD32(sum,MULT16_16(MULT16_16_16(g[2],pitch_control),C[2]));
+   sum = SUB32(sum,MULT16_16(MULT16_16_16(g[0],g[1]),C[3]));
+   sum = SUB32(sum,MULT16_16(MULT16_16_16(g[2],g[1]),C[4]));
+   sum = SUB32(sum,MULT16_16(MULT16_16_16(g[2],g[0]),C[5]));
+   sum = SUB32(sum,MULT16_16(MULT16_16_16(g[0],g[0]),C[6]));
+   sum = SUB32(sum,MULT16_16(MULT16_16_16(g[1],g[1]),C[7]));
+   sum = SUB32(sum,MULT16_16(MULT16_16_16(g[2],g[2]),C[8]));
+   return sum;
+}
+#endif
+
+#ifndef OVERRIDE_OPEN_LOOP_NBEST_PITCH
+void open_loop_nbest_pitch(spx_word16_t *sw, int start, int end, int len, int *pitch, spx_word16_t *gain, int N, char *stack)
+{
+   int i,j,k;
+   VARDECL(spx_word32_t *best_score);
+   VARDECL(spx_word32_t *best_ener);
+   spx_word32_t e0;
+   VARDECL(spx_word32_t *corr);
+   VARDECL(spx_word32_t *energy);
+
+   ALLOC(best_score, N, spx_word32_t);
+   ALLOC(best_ener, N, spx_word32_t);
+   ALLOC(corr, end-start+1, spx_word32_t);
+   ALLOC(energy, end-start+2, spx_word32_t);
+
+   for (i=0;i<N;i++)
+   {
+        best_score[i]=-1;
+        best_ener[i]=0;
+        pitch[i]=start;
+   }
+
+   energy[0]=inner_prod(sw-start, sw-start, len);
+   e0=inner_prod(sw, sw, len);
+   for (i=start;i<end;i++)
+   {
+      /* Update energy for next pitch*/
+      energy[i-start+1] = SUB32(ADD32(energy[i-start],SHR32(MULT16_16(sw[-i-1],sw[-i-1]),6)), SHR32(MULT16_16(sw[-i+len-1],sw[-i+len-1]),6));
+      if (energy[i-start+1] < 0)
+         energy[i-start+1] = 0;
+   }
+
+   pitch_xcorr(sw, sw-end, corr, len, end-start+1, stack);
+
+   /* FIXME: Fixed-point and floating-point code should be merged */
+#ifdef FIXED_POINT
+   {
+      VARDECL(spx_word16_t *corr16);
+      VARDECL(spx_word16_t *ener16);
+      ALLOC(corr16, end-start+1, spx_word16_t);
+      ALLOC(ener16, end-start+1, spx_word16_t);
+      /* Normalize to 180 so we can square it and it still fits in 16 bits */
+      normalize16(corr, corr16, 180, end-start+1);
+      normalize16(energy, ener16, 180, end-start+1);
+
+      for (i=start;i<=end;i++)
+      {
+         spx_word16_t tmp = MULT16_16_16(corr16[i-start],corr16[i-start]);
+         /* Instead of dividing the tmp by the energy, we multiply on the other side */
+         if (MULT16_16(tmp,best_ener[N-1])>MULT16_16(best_score[N-1],ADD16(1,ener16[i-start])))
+         {
+            /* We can safely put it last and then check */
+            best_score[N-1]=tmp;
+            best_ener[N-1]=ener16[i-start]+1;
+            pitch[N-1]=i;
+            /* Check if it comes in front of others */
+            for (j=0;j<N-1;j++)
+            {
+               if (MULT16_16(tmp,best_ener[j])>MULT16_16(best_score[j],ADD16(1,ener16[i-start])))
+               {
+                  for (k=N-1;k>j;k--)
+                  {
+                     best_score[k]=best_score[k-1];
+                     best_ener[k]=best_ener[k-1];
+                     pitch[k]=pitch[k-1];
+                  }
+                  best_score[j]=tmp;
+                  best_ener[j]=ener16[i-start]+1;
+                  pitch[j]=i;
+                  break;
+               }
+            }
+         }
+      }
+   }
+#else
+   for (i=start;i<=end;i++)
+   {
+      float tmp = corr[i-start]*corr[i-start];
+      if (tmp*best_ener[N-1]>best_score[N-1]*(1+energy[i-start]))
+      {
+         for (j=0;j<N;j++)
+         {
+            if (tmp*best_ener[j]>best_score[j]*(1+energy[i-start]))
+            {
+               for (k=N-1;k>j;k--)
+               {
+                  best_score[k]=best_score[k-1];
+                  best_ener[k]=best_ener[k-1];
+                  pitch[k]=pitch[k-1];
+               }
+               best_score[j]=tmp;
+               best_ener[j]=energy[i-start]+1;
+               pitch[j]=i;
+               break;
+            }
+         }
+      }
+   }
+#endif
+
+   /* Compute open-loop gain */
+   if (gain)
+   {
+       for (j=0;j<N;j++)
+       {
+          spx_word16_t g;
+          i=pitch[j];
+          g = DIV32(corr[i-start], 10+SHR32(MULT16_16(spx_sqrt(e0),spx_sqrt(energy[i-start])),6));
+          /* FIXME: g = max(g,corr/energy) */
+                   if (g<0)
+                   g = 0;
+             gain[j]=g;
+       }
+   }
+}
+#endif
+
+#ifndef OVERRIDE_PITCH_GAIN_SEARCH_3TAP_VQ
+static int pitch_gain_search_3tap_vq(
+  const signed char *gain_cdbk,
+  int                gain_cdbk_size,
+  spx_word16_t      *C16,
+  spx_word16_t       max_gain
+)
+{
+  const signed char *ptr=gain_cdbk;
+  int                best_cdbk=0;
+  spx_word32_t       best_sum=-VERY_LARGE32;
+  spx_word32_t       sum=0;
+  spx_word16_t       g[3];
+  spx_word16_t       pitch_control=64;
+  spx_word16_t       gain_sum;
+  int                i;
+
+  for (i=0;i<gain_cdbk_size;i++) {
+         
+    ptr = gain_cdbk+4*i;
+    g[0]=ADD16((spx_word16_t)ptr[0],32);
+    g[1]=ADD16((spx_word16_t)ptr[1],32);
+    g[2]=ADD16((spx_word16_t)ptr[2],32);
+    gain_sum = (spx_word16_t)ptr[3];
+         
+    sum = compute_pitch_error(C16, g, pitch_control);
+         
+    if (sum>best_sum && gain_sum<=max_gain) {
+      best_sum=sum;
+      best_cdbk=i;
+    }
+  }
+
+  return best_cdbk;
+}
+#endif
+
+/** Finds the best quantized 3-tap pitch predictor by analysis by synthesis */
+static spx_word32_t pitch_gain_search_3tap(
+const spx_word16_t target[],       /* Target vector */
+const spx_coef_t ak[],          /* LPCs for this subframe */
+const spx_coef_t awk1[],        /* Weighted LPCs #1 for this subframe */
+const spx_coef_t awk2[],        /* Weighted LPCs #2 for this subframe */
+spx_sig_t exc[],                /* Excitation */
+const signed char *gain_cdbk,
+int gain_cdbk_size,
+int   pitch,                    /* Pitch value */
+int   p,                        /* Number of LPC coeffs */
+int   nsf,                      /* Number of samples in subframe */
+SpeexBits *bits,
+char *stack,
+const spx_word16_t *exc2,
+const spx_word16_t *r,
+spx_word16_t *new_target,
+int  *cdbk_index,
+int plc_tuning,
+spx_word32_t cumul_gain
+)
+{
+   int i,j;
+   VARDECL(spx_word16_t *tmp1);
+   VARDECL(spx_word16_t *e);
+   spx_word16_t *x[3];
+   spx_word32_t corr[3];
+   spx_word32_t A[3][3];
+   spx_word16_t gain[3];
+   spx_word32_t err;
+   spx_word16_t max_gain=128;
+   int          best_cdbk=0;
+
+   ALLOC(tmp1, 3*nsf, spx_word16_t);
+   ALLOC(e, nsf, spx_word16_t);
+
+   if (cumul_gain > 262144)
+      max_gain = 31;
+   
+   x[0]=tmp1;
+   x[1]=tmp1+nsf;
+   x[2]=tmp1+2*nsf;
+   
+   {
+      VARDECL(spx_mem_t *mm);
+      int pp=pitch-1;
+      ALLOC(mm, p, spx_mem_t);
+      for (j=0;j<nsf;j++)
+      {
+         if (j-pp<0)
+            e[j]=exc2[j-pp];
+         else if (j-pp-pitch<0)
+            e[j]=exc2[j-pp-pitch];
+         else
+            e[j]=0;
+      }
+      for (j=0;j<p;j++)
+         mm[j] = 0;
+      iir_mem16(e, ak, e, nsf, p, mm, stack);
+      for (j=0;j<p;j++)
+         mm[j] = 0;
+      filter_mem16(e, awk1, awk2, e, nsf, p, mm, stack);
+      for (j=0;j<nsf;j++)
+         x[2][j] = e[j];
+   }
+   for (i=1;i>=0;i--)
+   {
+      spx_word16_t e0=exc2[-pitch-1+i];
+      x[i][0]=MULT16_16_Q14(r[0], e0);
+      for (j=0;j<nsf-1;j++)
+         x[i][j+1]=ADD32(x[i+1][j],MULT16_16_P14(r[j+1], e0));
+   }
+
+   for (i=0;i<3;i++)
+      corr[i]=inner_prod(x[i],target,nsf);
+   for (i=0;i<3;i++)
+      for (j=0;j<=i;j++)
+         A[i][j]=A[j][i]=inner_prod(x[i],x[j],nsf);
+
+   {
+      spx_word32_t C[9];
+#ifdef FIXED_POINT
+      spx_word16_t C16[9];
+#else
+      spx_word16_t *C16=C;
+#endif      
+      C[0]=corr[2];
+      C[1]=corr[1];
+      C[2]=corr[0];
+      C[3]=A[1][2];
+      C[4]=A[0][1];
+      C[5]=A[0][2];      
+      C[6]=A[2][2];
+      C[7]=A[1][1];
+      C[8]=A[0][0];
+      
+      /*plc_tuning *= 2;*/
+      if (plc_tuning<2)
+         plc_tuning=2;
+      if (plc_tuning>30)
+         plc_tuning=30;
+#ifdef FIXED_POINT
+      C[0] = SHL32(C[0],1);
+      C[1] = SHL32(C[1],1);
+      C[2] = SHL32(C[2],1);
+      C[3] = SHL32(C[3],1);
+      C[4] = SHL32(C[4],1);
+      C[5] = SHL32(C[5],1);
+      C[6] = MAC16_32_Q15(C[6],MULT16_16_16(plc_tuning,655),C[6]);
+      C[7] = MAC16_32_Q15(C[7],MULT16_16_16(plc_tuning,655),C[7]);
+      C[8] = MAC16_32_Q15(C[8],MULT16_16_16(plc_tuning,655),C[8]);
+      normalize16(C, C16, 32767, 9);
+#else
+      C[6]*=.5*(1+.02*plc_tuning);
+      C[7]*=.5*(1+.02*plc_tuning);
+      C[8]*=.5*(1+.02*plc_tuning);
+#endif
+
+      best_cdbk = pitch_gain_search_3tap_vq(gain_cdbk, gain_cdbk_size, C16, max_gain);
+
+#ifdef FIXED_POINT
+      gain[0] = ADD16(32,(spx_word16_t)gain_cdbk[best_cdbk*4]);
+      gain[1] = ADD16(32,(spx_word16_t)gain_cdbk[best_cdbk*4+1]);
+      gain[2] = ADD16(32,(spx_word16_t)gain_cdbk[best_cdbk*4+2]);
+      /*printf ("%d %d %d %d\n",gain[0],gain[1],gain[2], best_cdbk);*/
+#else
+      gain[0] = 0.015625*gain_cdbk[best_cdbk*4]  + .5;
+      gain[1] = 0.015625*gain_cdbk[best_cdbk*4+1]+ .5;
+      gain[2] = 0.015625*gain_cdbk[best_cdbk*4+2]+ .5;
+#endif
+      *cdbk_index=best_cdbk;
+   }
+
+   for (i=0;i<nsf;i++)
+      exc[i]=0;
+   for (i=0;i<3;i++)
+   {
+      int j;
+      int tmp1, tmp3;
+      int pp=pitch+1-i;
+      tmp1=nsf;
+      if (tmp1>pp)
+         tmp1=pp;
+      for (j=0;j<tmp1;j++)
+         exc[j]=MAC16_16(exc[j],SHL16(gain[2-i],7),exc2[j-pp]);
+      tmp3=nsf;
+      if (tmp3>pp+pitch)
+         tmp3=pp+pitch;
+      for (j=tmp1;j<tmp3;j++)
+         exc[j]=MAC16_16(exc[j],SHL16(gain[2-i],7),exc2[j-pp-pitch]);
+   }
+   for (i=0;i<nsf;i++)
+   {
+      spx_word32_t tmp = ADD32(ADD32(MULT16_16(gain[0],x[2][i]),MULT16_16(gain[1],x[1][i])),
+                            MULT16_16(gain[2],x[0][i]));
+      new_target[i] = SUB16(target[i], EXTRACT16(PSHR32(tmp,6)));
+   }
+   err = inner_prod(new_target, new_target, nsf);
+
+   return err;
+}
+
+/** Finds the best quantized 3-tap pitch predictor by analysis by synthesis */
+int pitch_search_3tap(
+spx_word16_t target[],                 /* Target vector */
+spx_word16_t *sw,
+spx_coef_t ak[],                     /* LPCs for this subframe */
+spx_coef_t awk1[],                   /* Weighted LPCs #1 for this subframe */
+spx_coef_t awk2[],                   /* Weighted LPCs #2 for this subframe */
+spx_sig_t exc[],                    /* Excitation */
+const void *par,
+int   start,                    /* Smallest pitch value allowed */
+int   end,                      /* Largest pitch value allowed */
+spx_word16_t pitch_coef,               /* Voicing (pitch) coefficient */
+int   p,                        /* Number of LPC coeffs */
+int   nsf,                      /* Number of samples in subframe */
+SpeexBits *bits,
+char *stack,
+spx_word16_t *exc2,
+spx_word16_t *r,
+int complexity,
+int cdbk_offset,
+int plc_tuning,
+spx_word32_t *cumul_gain
+)
+{
+   int i,j;
+   int cdbk_index, pitch=0, best_gain_index=0;
+   VARDECL(spx_sig_t *best_exc);
+   VARDECL(spx_word16_t *new_target);
+   VARDECL(spx_word16_t *best_target);
+   int best_pitch=0;
+   spx_word32_t err, best_err=-1;
+   int N;
+   const ltp_params *params;
+   const signed char *gain_cdbk;
+   int   gain_cdbk_size;
+   
+   VARDECL(int *nbest);
+   
+   params = (const ltp_params*) par;
+   gain_cdbk_size = 1<<params->gain_bits;
+   gain_cdbk = params->gain_cdbk + 4*gain_cdbk_size*cdbk_offset;
+   
+   N=complexity;
+   if (N>10)
+      N=10;
+   if (N<1)
+      N=1;
+
+   ALLOC(nbest, N, int);
+   params = (const ltp_params*) par;
+
+   if (end<start)
+   {
+      speex_bits_pack(bits, 0, params->pitch_bits);
+      speex_bits_pack(bits, 0, params->gain_bits);
+      for (i=0;i<nsf;i++)
+         exc[i]=0;
+      return start;
+   }
+   
+   if (N>end-start+1)
+      N=end-start+1;
+   if (end != start)
+      open_loop_nbest_pitch(sw, start, end, nsf, nbest, NULL, N, stack);
+   else
+      nbest[0] = start;
+   
+   ALLOC(best_exc, nsf, spx_sig_t);
+   ALLOC(new_target, nsf, spx_word16_t);
+   ALLOC(best_target, nsf, spx_word16_t);
+   
+   for (i=0;i<N;i++)
+   {
+      pitch=nbest[i];
+      for (j=0;j<nsf;j++)
+         exc[j]=0;
+      err=pitch_gain_search_3tap(target, ak, awk1, awk2, exc, gain_cdbk, gain_cdbk_size, pitch, p, nsf,
+                                 bits, stack, exc2, r, new_target, &cdbk_index, plc_tuning, *cumul_gain);
+      if (err<best_err || best_err<0)
+      {
+         for (j=0;j<nsf;j++)
+            best_exc[j]=exc[j];
+         for (j=0;j<nsf;j++)
+            best_target[j]=new_target[j];
+         best_err=err;
+         best_pitch=pitch;
+         best_gain_index=cdbk_index;
+      }
+   }
+   /*printf ("pitch: %d %d\n", best_pitch, best_gain_index);*/
+   speex_bits_pack(bits, best_pitch-start, params->pitch_bits);
+   speex_bits_pack(bits, best_gain_index, params->gain_bits);
+#ifdef FIXED_POINT
+   *cumul_gain = MULT16_32_Q13(SHL16(params->gain_cdbk[4*best_gain_index+3],8), MAX32(1024,*cumul_gain));
+#else
+   *cumul_gain = 0.03125*MAX32(1024,*cumul_gain)*params->gain_cdbk[4*best_gain_index+3];
+#endif
+   /*printf ("%f\n", cumul_gain);*/
+   /*printf ("encode pitch: %d %d\n", best_pitch, best_gain_index);*/
+   for (i=0;i<nsf;i++)
+      exc[i]=best_exc[i];
+   for (i=0;i<nsf;i++)
+      target[i]=best_target[i];
+
+   return pitch;
+}
+
+void pitch_unquant_3tap(
+spx_word16_t exc[],             /* Input excitation */
+spx_word32_t exc_out[],         /* Output excitation */
+int   start,                    /* Smallest pitch value allowed */
+int   end,                      /* Largest pitch value allowed */
+spx_word16_t pitch_coef,        /* Voicing (pitch) coefficient */
+const void *par,
+int   nsf,                      /* Number of samples in subframe */
+int *pitch_val,
+spx_word16_t *gain_val,
+SpeexBits *bits,
+char *stack,
+int count_lost,
+int subframe_offset,
+spx_word16_t last_pitch_gain,
+int cdbk_offset
+)
+{
+   int i;
+   int pitch;
+   int gain_index;
+   spx_word16_t gain[3];
+   const signed char *gain_cdbk;
+   int gain_cdbk_size;
+   const ltp_params *params;
+
+   params = (const ltp_params*) par;
+   gain_cdbk_size = 1<<params->gain_bits;
+   gain_cdbk = params->gain_cdbk + 4*gain_cdbk_size*cdbk_offset;
+
+   pitch = speex_bits_unpack_unsigned(bits, params->pitch_bits);
+   pitch += start;
+   gain_index = speex_bits_unpack_unsigned(bits, params->gain_bits);
+   /*printf ("decode pitch: %d %d\n", pitch, gain_index);*/
+#ifdef FIXED_POINT
+   gain[0] = ADD16(32,(spx_word16_t)gain_cdbk[gain_index*4]);
+   gain[1] = ADD16(32,(spx_word16_t)gain_cdbk[gain_index*4+1]);
+   gain[2] = ADD16(32,(spx_word16_t)gain_cdbk[gain_index*4+2]);
+#else
+   gain[0] = 0.015625*gain_cdbk[gain_index*4]+.5;
+   gain[1] = 0.015625*gain_cdbk[gain_index*4+1]+.5;
+   gain[2] = 0.015625*gain_cdbk[gain_index*4+2]+.5;
+#endif
+
+   if (count_lost && pitch > subframe_offset)
+   {
+      spx_word16_t gain_sum;
+      if (1) {
+#ifdef FIXED_POINT
+         spx_word16_t tmp = count_lost < 4 ? last_pitch_gain : SHR16(last_pitch_gain,1);
+         if (tmp>62)
+            tmp=62;
+#else
+         spx_word16_t tmp = count_lost < 4 ? last_pitch_gain : 0.5 * last_pitch_gain;
+         if (tmp>.95)
+            tmp=.95;
+#endif
+         gain_sum = gain_3tap_to_1tap(gain);
+
+         if (gain_sum > tmp)
+         {
+            spx_word16_t fact = DIV32_16(SHL32(EXTEND32(tmp),14),gain_sum);
+            for (i=0;i<3;i++)
+               gain[i]=MULT16_16_Q14(fact,gain[i]);
+         }
+
+      }
+
+   }
+
+   *pitch_val = pitch;
+   gain_val[0]=gain[0];
+   gain_val[1]=gain[1];
+   gain_val[2]=gain[2];
+   gain[0] = SHL16(gain[0],7);
+   gain[1] = SHL16(gain[1],7);
+   gain[2] = SHL16(gain[2],7);
+   for (i=0;i<nsf;i++)
+      exc_out[i]=0;
+   for (i=0;i<3;i++)
+   {
+      int j;
+      int tmp1, tmp3;
+      int pp=pitch+1-i;
+      tmp1=nsf;
+      if (tmp1>pp)
+         tmp1=pp;
+      for (j=0;j<tmp1;j++)
+         exc_out[j]=MAC16_16(exc_out[j],gain[2-i],exc[j-pp]);
+      tmp3=nsf;
+      if (tmp3>pp+pitch)
+         tmp3=pp+pitch;
+      for (j=tmp1;j<tmp3;j++)
+         exc_out[j]=MAC16_16(exc_out[j],gain[2-i],exc[j-pp-pitch]);
+   }
+   /*for (i=0;i<nsf;i++)
+   exc[i]=PSHR32(exc32[i],13);*/
+}
+
+
+/** Forced pitch delay and gain */
+int forced_pitch_quant(
+spx_word16_t target[],                 /* Target vector */
+spx_word16_t *sw,
+spx_coef_t ak[],                     /* LPCs for this subframe */
+spx_coef_t awk1[],                   /* Weighted LPCs #1 for this subframe */
+spx_coef_t awk2[],                   /* Weighted LPCs #2 for this subframe */
+spx_sig_t exc[],                    /* Excitation */
+const void *par,
+int   start,                    /* Smallest pitch value allowed */
+int   end,                      /* Largest pitch value allowed */
+spx_word16_t pitch_coef,               /* Voicing (pitch) coefficient */
+int   p,                        /* Number of LPC coeffs */
+int   nsf,                      /* Number of samples in subframe */
+SpeexBits *bits,
+char *stack,
+spx_word16_t *exc2,
+spx_word16_t *r,
+int complexity,
+int cdbk_offset,
+int plc_tuning,
+spx_word32_t *cumul_gain
+)
+{
+   int i;
+   VARDECL(spx_sig_t *res);
+   ALLOC(res, nsf, spx_sig_t);
+#ifdef FIXED_POINT
+   if (pitch_coef>63)
+      pitch_coef=63;
+#else
+   if (pitch_coef>.99)
+      pitch_coef=.99;
+#endif
+   for (i=0;i<nsf&&i<start;i++)
+   {
+      exc[i]=MULT16_16(SHL16(pitch_coef, 7),exc2[i-start]);
+   }
+   for (;i<nsf;i++)
+   {
+      exc[i]=MULT16_32_Q15(SHL16(pitch_coef, 9),exc[i-start]);
+   }
+   syn_percep_zero(exc, ak, awk1, awk2, res, nsf, p, stack);
+   for (i=0;i<nsf;i++)
+      target[i]=EXTRACT16(SATURATE(SUB32(EXTEND32(target[i]),PSHR32(res[i],SIG_SHIFT-1)),32700));
+   return start;
+}
+
+/** Unquantize forced pitch delay and gain */
+void forced_pitch_unquant(
+spx_word16_t exc[],             /* Input excitation */
+spx_word32_t exc_out[],         /* Output excitation */
+int   start,                    /* Smallest pitch value allowed */
+int   end,                      /* Largest pitch value allowed */
+spx_word16_t pitch_coef,        /* Voicing (pitch) coefficient */
+const void *par,
+int   nsf,                      /* Number of samples in subframe */
+int *pitch_val,
+spx_word16_t *gain_val,
+SpeexBits *bits,
+char *stack,
+int count_lost,
+int subframe_offset,
+spx_word16_t last_pitch_gain,
+int cdbk_offset
+)
+{
+   int i;
+#ifdef FIXED_POINT
+   if (pitch_coef>63)
+      pitch_coef=63;
+#else
+   if (pitch_coef>.99)
+      pitch_coef=.99;
+#endif
+   for (i=0;i<nsf;i++)
+   {
+      exc_out[i]=MULT16_16(exc[i-start],SHL16(pitch_coef,7));
+      exc[i] = PSHR(exc_out[i],13);
+   }
+   *pitch_val = start;
+   gain_val[0]=gain_val[2]=0;
+   gain_val[1] = pitch_coef;
+}

Added: freeswitch/trunk/libs/speex/libspeex/ltp.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/ltp.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,141 @@
+/* Copyright (C) 2002 Jean-Marc Valin */
+/**
+   @file ltp.h
+   @brief Long-Term Prediction functions
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#include <speex/speex_bits.h>
+#include "misc.h"
+
+/** LTP parameters. */
+typedef struct {
+   const signed char *gain_cdbk;
+   int     gain_bits;
+   int     pitch_bits;
+} ltp_params;
+
+#ifdef FIXED_POINT
+#define gain_3tap_to_1tap(g) (ABS(g[1]) + (g[0]>0 ? g[0] : -SHR16(g[0],1)) + (g[2]>0 ? g[2] : -SHR16(g[2],1)))
+#else
+#define gain_3tap_to_1tap(g) (ABS(g[1]) + (g[0]>0 ? g[0] : -.5*g[0]) + (g[2]>0 ? g[2] : -.5*g[2]))
+#endif
+
+spx_word32_t inner_prod(const spx_word16_t *x, const spx_word16_t *y, int len);
+void pitch_xcorr(const spx_word16_t *_x, const spx_word16_t *_y, spx_word32_t *corr, int len, int nb_pitch, char *stack);
+
+void open_loop_nbest_pitch(spx_word16_t *sw, int start, int end, int len, int *pitch, spx_word16_t *gain, int N, char *stack);
+
+
+/** Finds the best quantized 3-tap pitch predictor by analysis by synthesis */
+int pitch_search_3tap(
+spx_word16_t target[],                 /* Target vector */
+spx_word16_t *sw,
+spx_coef_t ak[],                     /* LPCs for this subframe */
+spx_coef_t awk1[],                   /* Weighted LPCs #1 for this subframe */
+spx_coef_t awk2[],                   /* Weighted LPCs #2 for this subframe */
+spx_sig_t exc[],                    /* Overlapping codebook */
+const void *par,
+int   start,                    /* Smallest pitch value allowed */
+int   end,                      /* Largest pitch value allowed */
+spx_word16_t pitch_coef,               /* Voicing (pitch) coefficient */
+int   p,                        /* Number of LPC coeffs */
+int   nsf,                      /* Number of samples in subframe */
+SpeexBits *bits,
+char *stack,
+spx_word16_t *exc2,
+spx_word16_t *r,
+int   complexity,
+int   cdbk_offset,
+int plc_tuning,
+spx_word32_t *cumul_gain
+);
+
+/*Unquantize adaptive codebook and update pitch contribution*/
+void pitch_unquant_3tap(
+spx_word16_t exc[],             /* Input excitation */
+spx_word32_t exc_out[],         /* Output excitation */
+int   start,                    /* Smallest pitch value allowed */
+int   end,                      /* Largest pitch value allowed */
+spx_word16_t pitch_coef,        /* Voicing (pitch) coefficient */
+const void *par,
+int   nsf,                      /* Number of samples in subframe */
+int *pitch_val,
+spx_word16_t *gain_val,
+SpeexBits *bits,
+char *stack,
+int lost,
+int subframe_offset,
+spx_word16_t last_pitch_gain,
+int cdbk_offset
+);
+
+/** Forced pitch delay and gain */
+int forced_pitch_quant(
+spx_word16_t target[],                 /* Target vector */
+spx_word16_t *sw,
+spx_coef_t ak[],                     /* LPCs for this subframe */
+spx_coef_t awk1[],                   /* Weighted LPCs #1 for this subframe */
+spx_coef_t awk2[],                   /* Weighted LPCs #2 for this subframe */
+spx_sig_t exc[],                    /* Excitation */
+const void *par,
+int   start,                    /* Smallest pitch value allowed */
+int   end,                      /* Largest pitch value allowed */
+spx_word16_t pitch_coef,               /* Voicing (pitch) coefficient */
+int   p,                        /* Number of LPC coeffs */
+int   nsf,                      /* Number of samples in subframe */
+SpeexBits *bits,
+char *stack,
+spx_word16_t *exc2,
+spx_word16_t *r,
+int complexity,
+int cdbk_offset,
+int plc_tuning,
+spx_word32_t *cumul_gain
+);
+
+/** Unquantize forced pitch delay and gain */
+void forced_pitch_unquant(
+spx_word16_t exc[],             /* Input excitation */
+spx_word32_t exc_out[],         /* Output excitation */
+int   start,                    /* Smallest pitch value allowed */
+int   end,                      /* Largest pitch value allowed */
+spx_word16_t pitch_coef,        /* Voicing (pitch) coefficient */
+const void *par,
+int   nsf,                      /* Number of samples in subframe */
+int *pitch_val,
+spx_word16_t *gain_val,
+SpeexBits *bits,
+char *stack,
+int lost,
+int subframe_offset,
+spx_word16_t last_pitch_gain,
+int cdbk_offset
+);

Added: freeswitch/trunk/libs/speex/libspeex/ltp_arm4.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/ltp_arm4.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,188 @@
+/* Copyright (C) 2004 Jean-Marc Valin */
+/**
+   @file ltp_arm4.h
+   @brief Long-Term Prediction functions (ARM4 version)
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#define OVERRIDE_INNER_PROD
+spx_word32_t inner_prod(const spx_word16_t *x, const spx_word16_t *y, int len)
+{
+   spx_word32_t sum1=0,sum2=0;
+   spx_word16_t *deadx, *deady;
+   int deadlen, dead1, dead2, dead3, dead4, dead5, dead6;
+   __asm__ __volatile__ (
+         "\tldrsh %5, [%0], #2 \n"
+         "\tldrsh %6, [%1], #2 \n"
+         ".inner_prod_loop%=:\n"
+         "\tsub %7, %7, %7\n"
+         "\tsub %10, %10, %10\n"
+
+         "\tldrsh %8, [%0], #2 \n"
+         "\tldrsh %9, [%1], #2 \n"
+         "\tmla %7, %5, %6, %7\n"
+         "\tldrsh %5, [%0], #2 \n"
+         "\tldrsh %6, [%1], #2 \n"
+         "\tmla %10, %8, %9, %10\n"
+         "\tldrsh %8, [%0], #2 \n"
+         "\tldrsh %9, [%1], #2 \n"
+         "\tmla %7, %5, %6, %7\n"
+         "\tldrsh %5, [%0], #2 \n"
+         "\tldrsh %6, [%1], #2 \n"
+         "\tmla %10, %8, %9, %10\n"
+
+         "\tldrsh %8, [%0], #2 \n"
+         "\tldrsh %9, [%1], #2 \n"
+         "\tmla %7, %5, %6, %7\n"
+         "\tldrsh %5, [%0], #2 \n"
+         "\tldrsh %6, [%1], #2 \n"
+         "\tmla %10, %8, %9, %10\n"
+         "\tldrsh %8, [%0], #2 \n"
+         "\tldrsh %9, [%1], #2 \n"
+         "\tmla %7, %5, %6, %7\n"
+         "\tldrsh %5, [%0], #2 \n"
+         "\tldrsh %6, [%1], #2 \n"
+         "\tmla %10, %8, %9, %10\n"
+
+         "\tsubs %4, %4, #1\n"
+         "\tadd %2, %2, %7, asr #5\n"
+         "\tadd %3, %3, %10, asr #5\n"
+         "\tbne .inner_prod_loop%=\n"
+   : "=r" (deadx), "=r" (deady), "=r" (sum1),  "=r" (sum2), "=r" (deadlen),
+   "=r" (dead1), "=r" (dead2), "=r" (dead3), "=r" (dead4), "=r" (dead5), "=r" (dead6)
+   : "0" (x), "1" (y), "2" (sum1), "3" (sum2), "4" (len>>3)
+   : "cc"
+                        );
+   return (sum1+sum2)>>1;
+}
+
+#define OVERRIDE_PITCH_XCORR
+void pitch_xcorr(const spx_word16_t *_x, const spx_word16_t *_y, spx_word32_t *corr, int len, int nb_pitch, char *stack)
+{
+   int i,j;
+   for (i=0;i<nb_pitch;i+=4)
+   {
+      /* Compute correlation*/
+      //corr[nb_pitch-1-i]=inner_prod(x, _y+i, len);
+      spx_word32_t sum1=0;
+      spx_word32_t sum2=0;
+      spx_word32_t sum3=0;
+      spx_word32_t sum4=0;
+      const spx_word16_t *y = _y+i;
+      const spx_word16_t *x = _x;
+      spx_word32_t y0, y1, y2, y3;
+      y0=*y++;
+      y1=*y++;
+      y2=*y++;
+      y3=*y++;
+      for (j=0;j<len;j+=4)
+      {
+         spx_word32_t part1, part2, part3, part4, x0;
+         spx_word32_t dead1;
+         __asm__ __volatile__ (
+#ifdef SHORTCUTS
+               "\tldrsh %10, [%8], #4 \n"
+               "\tmul %4, %10, %0 \n"
+               "\tldrsh %15, [%8], #4 \n"
+               "\tmul %5, %10, %1 \n"
+               "\tldrsh %0, [%9], #2 \n"
+               "\tmul %6, %10, %2 \n"
+               "\tldrsh %1, [%9], #2 \n"
+               "\tmul %7, %10, %3 \n"
+               
+               
+               "\tmla %4, %15, %2, %4 \n"
+               "\tldrsh %2, [%9], #2 \n"
+               "\tmla %5, %15, %3, %5 \n"
+               "\tldrsh %3, [%9], #2 \n"
+               "\tmla %6, %15, %0, %6 \n"
+               "\tmla %7, %15, %1, %7 \n"
+
+#else
+               "\tldrsh %10, [%8], #2 \n"
+               "\tmul %4, %10, %0 \n"
+               "\tmul %5, %10, %1 \n"
+               "\tmul %6, %10, %2 \n"
+               "\tmul %7, %10, %3 \n"
+
+               "\tldrsh %10, [%8], #2 \n"
+               "\tldrsh %0, [%9], #2 \n"
+               "\tmla %4, %10, %1, %4 \n"
+               "\tmla %5, %10, %2, %5 \n"
+               "\tmla %6, %10, %3, %6 \n"
+               "\tmla %7, %10, %0, %7 \n"
+
+               "\tldrsh %10, [%8], #2 \n"
+               "\tldrsh %1, [%9], #2 \n"
+               "\tmla %4, %10, %2, %4 \n"
+               "\tmla %5, %10, %3, %5 \n"
+               "\tmla %6, %10, %0, %6 \n"
+               "\tmla %7, %10, %1, %7 \n"
+
+               "\tldrsh %10, [%8], #2 \n"
+               "\tldrsh %2, [%9], #2 \n"
+               "\tmla %4, %10, %3, %4 \n"
+               "\tmla %5, %10, %0, %5 \n"
+               "\tmla %6, %10, %1, %6 \n"
+               "\tmla %7, %10, %2, %7 \n"
+
+               "\tldrsh %3, [%9], #2 \n"
+#endif
+
+               "\tldr %10, %11 \n"
+               "\tldr %15, %12 \n"
+               "\tadd %4, %10, %4, asr #6 \n"
+               "\tstr %4, %11 \n"
+               "\tldr %10, %13 \n"
+               "\tadd %5, %15, %5, asr #6 \n"
+               "\tstr %5, %12 \n"
+               "\tldr %15, %14 \n"
+               "\tadd %6, %10, %6, asr #6 \n"
+               "\tadd %7, %15, %7, asr #6 \n"
+               "\tstr %6, %13 \n"
+               "\tstr %7, %14 \n"
+
+            : "=r" (y0), "=r" (y1), "=r" (y2), "=r" (y3),
+         "=r" (part1),  "=r" (part2),  "=r" (part3),  "=r" (part4),
+         "=r" (x), "=r" (y), "=r" (x0),
+         "=m" (sum1), "=m" (sum2), "=m" (sum3), "=m" (sum4), "=r" (dead1)
+            : "0" (y0), "1" (y1), "2" (y2), "3" (y3),
+            "8" (x), "9" (y),
+            "11" (sum1), "12" (sum2), "13" (sum3), "14" (sum4)
+            : "cc", "memory"
+                              );
+      }
+      corr[nb_pitch-1-i]=sum1;
+      corr[nb_pitch-2-i]=sum2;
+      corr[nb_pitch-3-i]=sum3;
+      corr[nb_pitch-4-i]=sum4;
+   }
+
+}

Added: freeswitch/trunk/libs/speex/libspeex/ltp_bfin.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/ltp_bfin.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,419 @@
+/* Copyright (C) 2005 Analog Devices */
+/**
+   @file ltp_bfin.h
+   @author Jean-Marc Valin
+   @brief Long-Term Prediction functions (Blackfin version)
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#define OVERRIDE_INNER_PROD
+spx_word32_t inner_prod(const spx_word16_t *x, const spx_word16_t *y, int len)
+{
+   spx_word32_t sum=0;
+   __asm__ __volatile__ (
+      "P0 = %3;\n\t"
+      "P1 = %1;\n\t"
+      "P2 = %2;\n\t"
+      "I0 = P1;\n\t"
+      "I1 = P2;\n\t"
+      "L0 = 0;\n\t"
+      "L1 = 0;\n\t"
+      "A0 = 0;\n\t"
+      "R0.L = W[I0++] || R1.L = W[I1++];\n\t"
+      "LOOP inner%= LC0 = P0;\n\t"
+      "LOOP_BEGIN inner%=;\n\t"
+         "A0 += R0.L*R1.L (IS) || R0.L = W[I0++] || R1.L = W[I1++];\n\t"
+      "LOOP_END inner%=;\n\t"
+      "A0 += R0.L*R1.L (IS);\n\t"
+      "A0 = A0 >>> 6;\n\t"
+      "R0 = A0;\n\t"
+      "%0 = R0;\n\t"
+   : "=m" (sum)
+   : "m" (x), "m" (y), "d" (len-1)
+   : "P0", "P1", "P2", "R0", "R1", "A0", "I0", "I1", "L0", "L1", "R3"
+   );
+   return sum;
+}
+
+#define OVERRIDE_PITCH_XCORR
+void pitch_xcorr(const spx_word16_t *_x, const spx_word16_t *_y, spx_word32_t *corr, int len, int nb_pitch, char *stack)
+{
+   corr += nb_pitch - 1;
+   __asm__ __volatile__ (
+      "P2 = %0;\n\t"
+      "I0 = P2;\n\t" /* x in I0 */
+      "B0 = P2;\n\t" /* x in B0 */
+      "R0 = %3;\n\t" /* len in R0 */
+      "P3 = %3;\n\t"
+      "P3 += -2;\n\t" /* len in R0 */
+      "P4 = %4;\n\t" /* nb_pitch in R0 */
+      "R1 = R0 << 1;\n\t" /* number of bytes in x */
+      "L0 = R1;\n\t"
+      "P0 = %1;\n\t"
+
+      "P1 = %2;\n\t"
+      "B1 = P1;\n\t"
+      "L1 = 0;\n\t" /*Disable looping on I1*/
+
+      "r0 = [I0++];\n\t"
+      "LOOP pitch%= LC0 = P4 >> 1;\n\t"
+      "LOOP_BEGIN pitch%=;\n\t"
+         "I1 = P0;\n\t"
+         "A1 = A0 = 0;\n\t"
+         "R1 = [I1++];\n\t"
+         "LOOP inner_prod%= LC1 = P3 >> 1;\n\t"
+         "LOOP_BEGIN inner_prod%=;\n\t"
+            "A1 += R0.L*R1.H, A0 += R0.L*R1.L (IS) || R1.L = W[I1++];\n\t"
+            "A1 += R0.H*R1.L, A0 += R0.H*R1.H (IS) || R1.H = W[I1++] || R0 = [I0++];\n\t"
+         "LOOP_END inner_prod%=;\n\t"
+         "A1 += R0.L*R1.H, A0 += R0.L*R1.L (IS) || R1.L = W[I1++];\n\t"
+         "A1 += R0.H*R1.L, A0 += R0.H*R1.H (IS) || R0 = [I0++];\n\t"
+         "A0 = A0 >>> 6;\n\t"
+         "A1 = A1 >>> 6;\n\t"
+         "R2 = A0, R3 = A1;\n\t"
+         "[P1--] = r2;\n\t"
+         "[P1--] = r3;\n\t"
+         "P0 += 4;\n\t"
+      "LOOP_END pitch%=;\n\t"
+      "L0 = 0;\n\t"
+   : : "m" (_x), "m" (_y), "m" (corr), "m" (len), "m" (nb_pitch)
+   : "A0", "A1", "P0", "P1", "P2", "P3", "P4", "R0", "R1", "R2", "R3", "I0", "I1", "L0", "L1", "B0", "B1", "memory"
+   );
+}
+
+#define OVERRIDE_COMPUTE_PITCH_ERROR
+static inline spx_word32_t compute_pitch_error(spx_word16_t *C, spx_word16_t *g, spx_word16_t pitch_control)
+{
+   spx_word32_t sum;
+   __asm__ __volatile__
+         (
+         "A0 = 0;\n\t"
+         
+         "R0 = W[%1++];\n\t"
+         "R1.L = %2.L*%5.L (IS);\n\t"
+         "A0 += R1.L*R0.L (IS) || R0 = W[%1++];\n\t"
+         
+         "R1.L = %3.L*%5.L (IS);\n\t"
+         "A0 += R1.L*R0.L (IS) || R0 = W[%1++];\n\t"
+         
+         "R1.L = %4.L*%5.L (IS);\n\t"
+         "A0 += R1.L*R0.L (IS) || R0 = W[%1++];\n\t"
+         
+         "R1.L = %2.L*%3.L (IS);\n\t"
+         "A0 -= R1.L*R0.L (IS) || R0 = W[%1++];\n\t"
+
+         "R1.L = %4.L*%3.L (IS);\n\t"
+         "A0 -= R1.L*R0.L (IS) || R0 = W[%1++];\n\t"
+         
+         "R1.L = %4.L*%2.L (IS);\n\t"
+         "A0 -= R1.L*R0.L (IS) || R0 = W[%1++];\n\t"
+         
+         "R1.L = %2.L*%2.L (IS);\n\t"
+         "A0 -= R1.L*R0.L (IS) || R0 = W[%1++];\n\t"
+
+         "R1.L = %3.L*%3.L (IS);\n\t"
+         "A0 -= R1.L*R0.L (IS) || R0 = W[%1++];\n\t"
+         
+         "R1.L = %4.L*%4.L (IS);\n\t"
+         "A0 -= R1.L*R0.L (IS);\n\t"
+         
+         "%0 = A0;\n\t"
+   : "=&D" (sum), "=a" (C)
+   : "d" (g[0]), "d" (g[1]), "d" (g[2]), "d" (pitch_control), "1" (C)
+   : "R0", "R1", "R2", "A0"
+         );
+   return sum;
+}
+
+#define OVERRIDE_OPEN_LOOP_NBEST_PITCH
+#ifdef OVERRIDE_OPEN_LOOP_NBEST_PITCH
+void open_loop_nbest_pitch(spx_word16_t *sw, int start, int end, int len, int *pitch, spx_word16_t *gain, int N, char *stack)
+{
+   int i,j,k;
+   VARDECL(spx_word32_t *best_score);
+   VARDECL(spx_word32_t *best_ener);
+   spx_word32_t e0;
+   VARDECL(spx_word32_t *corr);
+   VARDECL(spx_word32_t *energy);
+
+   ALLOC(best_score, N, spx_word32_t);
+   ALLOC(best_ener, N, spx_word32_t);
+   ALLOC(corr, end-start+1, spx_word32_t);
+   ALLOC(energy, end-start+2, spx_word32_t);
+
+   for (i=0;i<N;i++)
+   {
+        best_score[i]=-1;
+        best_ener[i]=0;
+        pitch[i]=start;
+   }
+
+   energy[0]=inner_prod(sw-start, sw-start, len);
+   e0=inner_prod(sw, sw, len);
+
+   /* energy update -------------------------------------*/
+
+      __asm__ __volatile__
+      (
+"        P0 = %0;\n\t"
+"        I1 = %1;\n\t"
+"        L1 = 0;\n\t"
+"        I2 = %2;\n\t"
+"        L2 = 0;\n\t"
+"        R2 = [P0++];\n\t"
+"        R3 = 0;\n\t"
+"        LSETUP (eu1, eu2) LC1 = %3;\n\t"
+"eu1:      R1.L = W [I1--] || R0.L = W [I2--] ;\n\t"
+"          R1 = R1.L * R1.L (IS);\n\t"
+"          R0 = R0.L * R0.L (IS);\n\t"
+"          R1 >>>= 6;\n\t"
+"          R1 = R1 + R2;\n\t"
+"          R0 >>>= 6;\n\t"
+"          R1 = R1 - R0;\n\t"
+"          R2 = MAX(R1,R3);\n\t"
+"eu2:      [P0++] = R2;\n\t"
+       : : "d" (energy), "d" (&sw[-start-1]), "d" (&sw[-start+len-1]),
+           "a" (end-start)  
+       : "P0", "I1", "I2", "R0", "R1", "R2", "R3"
+#if (__GNUC__ == 4)
+         , "LC1"
+#endif
+       );
+
+   pitch_xcorr(sw, sw-end, corr, len, end-start+1, stack);
+
+   /* FIXME: Fixed-point and floating-point code should be merged */
+   {
+      VARDECL(spx_word16_t *corr16);
+      VARDECL(spx_word16_t *ener16);
+      ALLOC(corr16, end-start+1, spx_word16_t);
+      ALLOC(ener16, end-start+1, spx_word16_t);
+      /* Normalize to 180 so we can square it and it still fits in 16 bits */
+      normalize16(corr, corr16, 180, end-start+1);
+      normalize16(energy, ener16, 180, end-start+1);
+
+      if (N == 1) {
+	/* optimised asm to handle N==1 case */
+      __asm__ __volatile__
+      (
+"        I0 = %1;\n\t"                     /* I0: corr16[]    */
+"        L0 = 0;\n\t"
+"        I1 = %2;\n\t"                     /* I1: energy      */
+"        L1 = 0;\n\t"
+"        R2 = -1;\n\t"                     /* R2: best score  */
+"        R3 = 0;\n\t"                      /* R3: best energy */
+"        P0 = %4;\n\t"                     /* P0: best pitch  */
+"        P1 = %4;\n\t"                     /* P1: counter     */
+"        LSETUP (sl1, sl2) LC1 = %3;\n\t"
+"sl1:      R0.L = W [I0++] || R1.L = W [I1++];\n\t"         
+"          R0 = R0.L * R0.L (IS);\n\t"
+"          R1   += 1;\n\t"
+"          R4   = R0.L * R3.L;\n\t"
+"          R5   = R2.L * R1.L;\n\t"
+"          cc   = R5 < R4;\n\t"
+"          if cc R2 = R0;\n\t"
+"          if cc R3 = R1;\n\t"
+"          if cc P0 = P1;\n\t"
+"sl2:      P1 += 1;\n\t"
+"        %0 = P0;\n\t"
+       : "=&d" (pitch[0])
+       : "a" (corr16), "a" (ener16), "a" (end+1-start), "d" (start) 
+       : "P0", "P1", "I0", "I1", "R0", "R1", "R2", "R3", "R4", "R5"
+#if (__GNUC__ == 4)
+         , "LC1"
+#endif
+       );
+
+      }
+      else {
+	for (i=start;i<=end;i++)
+	  {
+	    spx_word16_t tmp = MULT16_16_16(corr16[i-start],corr16[i-start]);
+	    /* Instead of dividing the tmp by the energy, we multiply on the other side */
+	    if (MULT16_16(tmp,best_ener[N-1])>MULT16_16(best_score[N-1],ADD16(1,ener16[i-start])))
+	      {
+		/* We can safely put it last and then check */
+		best_score[N-1]=tmp;
+		best_ener[N-1]=ener16[i-start]+1;
+		pitch[N-1]=i;
+		/* Check if it comes in front of others */
+		for (j=0;j<N-1;j++)
+		  {
+		    if (MULT16_16(tmp,best_ener[j])>MULT16_16(best_score[j],ADD16(1,ener16[i-start])))
+		      {
+			for (k=N-1;k>j;k--)
+			  {
+			    best_score[k]=best_score[k-1];
+			    best_ener[k]=best_ener[k-1];
+			    pitch[k]=pitch[k-1];
+			  }
+			best_score[j]=tmp;
+			best_ener[j]=ener16[i-start]+1;
+			pitch[j]=i;
+			break;
+		      }
+		  }
+	      }
+	  }
+      }
+   }
+
+   /* Compute open-loop gain */
+   if (gain)
+   {
+       for (j=0;j<N;j++)
+       {
+          spx_word16_t g;
+          i=pitch[j];
+          g = DIV32(corr[i-start], 10+SHR32(MULT16_16(spx_sqrt(e0),spx_sqrt(energy[i-start])),6));
+          /* FIXME: g = max(g,corr/energy) */
+                   if (g<0)
+                   g = 0;
+             gain[j]=g;
+       }
+   }
+}
+#endif
+
+#define OVERRIDE_PITCH_GAIN_SEARCH_3TAP_VQ
+#ifdef OVERRIDE_PITCH_GAIN_SEARCH_3TAP_VQ
+static int pitch_gain_search_3tap_vq(
+  const signed char *gain_cdbk,
+  int                gain_cdbk_size,
+  spx_word16_t      *C16,
+  spx_word16_t       max_gain
+)
+{
+  const signed char *ptr=gain_cdbk;
+  int                best_cdbk=0;
+  spx_word32_t       best_sum=-VERY_LARGE32;
+  spx_word32_t       sum=0;
+  spx_word16_t       g[3];
+  spx_word16_t       pitch_control=64;
+  spx_word16_t       gain_sum;
+  int                i;
+
+      /* fast asm version of VQ codebook search */
+
+      __asm__ __volatile__
+      (
+
+"        P0 = %2;\n\t"                     /* P0: ptr to gain_cdbk */
+"        L1 = 0;\n\t"                      /* no circ addr for L1  */
+"        %0 = 0;\n\t"                      /* %0: best_sum         */
+"        %1 = 0;\n\t"                      /* %1: best_cbdk        */
+"        P1 = 0;\n\t"                      /* P1: loop counter     */
+"        R5 = 64;\n\t"                     /* R5: pitch_control    */
+
+"        LSETUP (pgs1, pgs2) LC1 = %4;\n\t"
+"pgs1:     R2  = B [P0++] (X);\n\t"        /* R2: g[0]             */
+"          R3  = B [P0++] (X);\n\t"        /* R3: g[1]             */
+"          R4  = B [P0++] (X);\n\t"        /* R4: g[2]             */
+"          R2 += 32;\n\t"
+"          R3 += 32;\n\t"
+"          R4 += 32;\n\t"
+
+"          R0  = B [P0++] (X);\n\t"              
+"          B0  = R0;\n\t"                  /* BO: gain_sum         */
+          
+           /* compute_pitch_error() -------------------------------*/
+
+"          I1 = %3;\n\t"                   /* I1: ptr to C         */
+"          A0 = 0;\n\t"
+         
+"          R0.L = W[I1++];\n\t"
+"          R1.L = R2.L*R5.L (IS);\n\t"
+"          A0 += R1.L*R0.L (IS) || R0.L = W[I1++];\n\t"
+         
+"          R1.L = R3.L*R5.L (IS);\n\t"
+"          A0 += R1.L*R0.L (IS) || R0.L = W[I1++];\n\t"
+         
+"          R1.L = R4.L*R5.L (IS);\n\t"
+"          A0 += R1.L*R0.L (IS) || R0.L = W[I1++];\n\t"
+         
+"          R1.L = R2.L*R3.L (IS);\n\t"
+"          A0 -= R1.L*R0.L (IS) || R0.L = W[I1++];\n\t"
+
+"          R1.L = R4.L*R3.L (IS);\n\t"
+"          A0 -= R1.L*R0.L (IS) || R0.L = W[I1++];\n\t"
+         
+"          R1.L = R4.L*R2.L (IS);\n\t"
+"          A0 -= R1.L*R0.L (IS) || R0.L = W[I1++];\n\t"
+         
+"          R1.L = R2.L*R2.L (IS);\n\t"
+"          A0 -= R1.L*R0.L (IS) || R0.L = W[I1++];\n\t"
+
+"          R1.L = R3.L*R3.L (IS);\n\t"
+"          A0 -= R1.L*R0.L (IS) || R0.L = W[I1++];\n\t"
+         
+"          R1.L = R4.L*R4.L (IS);\n\t"
+"          R0 = (A0 -= R1.L*R0.L) (IS);\n\t"
+
+/*
+    Re-arrange the if-then to code efficiently on the Blackfin:
+
+      if (sum>best_sum && gain_sum<=max_gain)   ------ (1)
+
+      if (sum>best_sum && !(gain_sum>max_gain)) ------ (2)
+
+      if (max_gain<=gain_sum) {                 ------ (3)
+      sum = -VERY_LARGE32;
+      }
+      if (best_sum<=sum)
+
+    The blackin cc instructions are all of the form:
+
+      cc = x < y (or cc = x <= y)
+*/
+"          R1 = B0\n\t"
+"          R2 = %5\n\t"
+"          R3 = %6\n\t"
+"          cc = R2 <= R1;\n\t" 
+"          if cc R0 = R3;\n\t"
+"          cc = %0 <= R0;\n\t"
+"          if cc %0 = R0;\n\t"
+"          if cc %1 = P1;\n\t"
+
+"pgs2:     P1 += 1;\n\t"
+   
+       : "=&d" (best_sum), "=&d" (best_cdbk) 
+       : "a" (gain_cdbk), "a" (C16), "a" (gain_cdbk_size), "a" (max_gain),
+         "b" (-VERY_LARGE32)
+       : "R0", "R1", "R2", "R3", "R4", "R5", "P0", 
+         "P1", "I1", "L1", "A0", "B0"
+#if (__GNUC__ == 4)
+         , "LC1"
+#endif
+       );
+
+  return best_cdbk;
+}
+#endif
+

Added: freeswitch/trunk/libs/speex/libspeex/ltp_sse.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/ltp_sse.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,92 @@
+/* Copyright (C) 2002 Jean-Marc Valin */
+/**
+   @file ltp_sse.h
+   @brief Long-Term Prediction functions (SSE version)
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#include <xmmintrin.h>
+
+#define OVERRIDE_INNER_PROD
+float inner_prod(const float *a, const float *b, int len)
+{
+   int i;
+   float ret;
+   __m128 sum = _mm_setzero_ps();
+   for (i=0;i<(len>>2);i+=2)
+   {
+      sum = _mm_add_ps(sum, _mm_mul_ps(_mm_loadu_ps(a+0), _mm_loadu_ps(b+0)));
+      sum = _mm_add_ps(sum, _mm_mul_ps(_mm_loadu_ps(a+4), _mm_loadu_ps(b+4)));
+      a += 8;
+      b += 8;
+   }
+   sum = _mm_add_ps(sum, _mm_movehl_ps(sum, sum));
+   sum = _mm_add_ss(sum, _mm_shuffle_ps(sum, sum, 0x55));
+   _mm_store_ss(&ret, sum);
+   return ret;
+}
+
+#define OVERRIDE_PITCH_XCORR
+void pitch_xcorr(const float *_x, const float *_y, float *corr, int len, int nb_pitch, char *stack)
+{
+   int i, offset;
+   VARDECL(__m128 *x);
+   VARDECL(__m128 *y);
+   int N, L;
+   N = len>>2;
+   L = nb_pitch>>2;
+   ALLOC(x, N, __m128);
+   ALLOC(y, N+L, __m128);
+   for (i=0;i<N;i++)
+      x[i] = _mm_loadu_ps(_x+(i<<2));
+   for (offset=0;offset<4;offset++)
+   {
+      for (i=0;i<N+L;i++)
+         y[i] = _mm_loadu_ps(_y+(i<<2)+offset);
+      for (i=0;i<L;i++)
+      {
+         int j;
+         __m128 sum, *xx, *yy;
+         sum = _mm_setzero_ps();
+         yy = y+i;
+         xx = x;
+         for (j=0;j<N;j+=2)
+         {
+            sum = _mm_add_ps(sum, _mm_mul_ps(xx[0], yy[0]));
+            sum = _mm_add_ps(sum, _mm_mul_ps(xx[1], yy[1]));
+            xx += 2;
+            yy += 2;
+         }
+         sum = _mm_add_ps(sum, _mm_movehl_ps(sum, sum));
+         sum = _mm_add_ss(sum, _mm_shuffle_ps(sum, sum, 0x55));
+         _mm_store_ss(corr+nb_pitch-1-(i<<2)-offset, sum);
+      }
+   }
+}

Added: freeswitch/trunk/libs/speex/libspeex/math_approx.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/math_approx.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,181 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: math_approx.c
+   Various math approximation functions for Speex
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "math_approx.h"
+#include "misc.h"
+
+#ifdef FIXED_POINT
+
+/* sqrt(x) ~= 0.22178 + 1.29227*x - 0.77070*x^2 + 0.25723*x^3 (for .25 < x < 1) */
+#define C0 3634
+#define C1 21173
+#define C2 -12627
+#define C3 4215
+
+spx_word16_t spx_sqrt(spx_word32_t x)
+{
+   int k=0;
+   spx_word32_t rt;
+
+   if (x<=0)
+      return 0;
+#if 1
+   if (x>=16777216)
+   {
+      x>>=10;
+      k+=5;
+   }
+   if (x>=1048576)
+   {
+      x>>=6;
+      k+=3;
+   }
+   if (x>=262144)
+   {
+      x>>=4;
+      k+=2;
+   }
+   if (x>=32768)
+   {
+      x>>=2;
+      k+=1;
+   }
+   if (x>=16384)
+   {
+      x>>=2;
+      k+=1;
+   }
+#else
+   while (x>=16384)
+   {
+      x>>=2;
+      k++;
+      }
+#endif
+   while (x<4096)
+   {
+      x<<=2;
+      k--;
+   }
+   rt = ADD16(C0, MULT16_16_Q14(x, ADD16(C1, MULT16_16_Q14(x, ADD16(C2, MULT16_16_Q14(x, (C3)))))));
+   if (rt > 16383)
+      rt = 16383;
+   if (k>0)
+      rt <<= k;
+   else
+      rt >>= -k;
+   rt >>=7;
+   return rt;
+}
+
+/* log(x) ~= -2.18151 + 4.20592*x - 2.88938*x^2 + 0.86535*x^3 (for .5 < x < 1) */
+
+
+#define A1 16469
+#define A2 2242
+#define A3 1486
+
+spx_word16_t spx_acos(spx_word16_t x)
+{
+   int s=0;
+   spx_word16_t ret;
+   spx_word16_t sq;
+   if (x<0)
+   {
+      s=1;
+      x = NEG16(x);
+   }
+   x = SUB16(16384,x);
+   
+   x = x >> 1;
+   sq = MULT16_16_Q13(x, ADD16(A1, MULT16_16_Q13(x, ADD16(A2, MULT16_16_Q13(x, (A3))))));
+   ret = spx_sqrt(SHL32(EXTEND32(sq),13));
+   
+   /*ret = spx_sqrt(67108864*(-1.6129e-04 + 2.0104e+00*f + 2.7373e-01*f*f + 1.8136e-01*f*f*f));*/
+   if (s)
+      ret = SUB16(25736,ret);
+   return ret;
+}
+
+
+#define K1 8192
+#define K2 -4096
+#define K3 340
+#define K4 -10
+
+spx_word16_t spx_cos(spx_word16_t x)
+{
+   spx_word16_t x2;
+
+   if (x<12868)
+   {
+      x2 = MULT16_16_P13(x,x);
+      return ADD32(K1, MULT16_16_P13(x2, ADD32(K2, MULT16_16_P13(x2, ADD32(K3, MULT16_16_P13(K4, x2))))));
+   } else {
+      x = SUB16(25736,x);
+      x2 = MULT16_16_P13(x,x);
+      return SUB32(-K1, MULT16_16_P13(x2, ADD32(K2, MULT16_16_P13(x2, ADD32(K3, MULT16_16_P13(K4, x2))))));
+   }
+}
+
+#else
+
+#ifndef M_PI
+#define M_PI           3.14159265358979323846  /* pi */
+#endif
+
+#define C1 0.9999932946f
+#define C2 -0.4999124376f
+#define C3 0.0414877472f
+#define C4 -0.0012712095f
+
+
+#define SPX_PI_2 1.5707963268
+spx_word16_t spx_cos(spx_word16_t x)
+{
+   if (x<SPX_PI_2)
+   {
+      x *= x;
+      return C1 + x*(C2+x*(C3+C4*x));
+   } else {
+      x = M_PI-x;
+      x *= x;
+      return NEG16(C1 + x*(C2+x*(C3+C4*x)));
+   }
+}
+
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/math_approx.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/math_approx.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,50 @@
+/* Copyright (C) 2002 Jean-Marc Valin */
+/**
+   @file math_approx.h
+   @brief Various math approximation functions for Speex
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef MATH_APPROX_H
+#define MATH_APPROX_H
+
+#include "misc.h"
+
+spx_word16_t spx_cos(spx_word16_t x);
+
+#ifdef FIXED_POINT
+spx_word16_t spx_sqrt(spx_word32_t x);
+spx_word16_t spx_acos(spx_word16_t x);
+#else
+#define spx_sqrt sqrt
+#define spx_acos acos
+#endif
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/mdf.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/mdf.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,865 @@
+/* Copyright (C) 2003-2006 Jean-Marc Valin
+
+   File: mdf.c
+   Echo canceller based on the MDF algorithm (see below)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are
+   met:
+
+   1. Redistributions of source code must retain the above copyright notice,
+   this list of conditions and the following disclaimer.
+
+   2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   3. The name of the author may not be used to endorse or promote products
+   derived from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+   DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+   ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/*
+   The echo canceller is based on the MDF algorithm described in:
+
+   J. S. Soo, K. K. Pang Multidelay block frequency adaptive filter, 
+   IEEE Trans. Acoust. Speech Signal Process., Vol. ASSP-38, No. 2, 
+   February 1990.
+   
+   We use the Alternatively Updated MDF (AUMDF) variant. Robustness to 
+   double-talk is achieved using a variable learning rate as described in:
+   
+   Valin, J.-M., On Adjusting the Learning Rate in Frequency Domain Echo 
+   Cancellation With Double-Talk. To appear in IEEE Transactions on Audio,
+   Speech and Language Processing, 2006.
+   http://people.xiph.org/~jm/papers/valin_taslp2006.pdf
+   
+   There is no explicit double-talk detection, but a continuous variation
+   in the learning rate based on residual echo, double-talk and background
+   noise.
+   
+   About the fixed-point version:
+   All the signals are represented with 16-bit words. The filter weights 
+   are represented with 32-bit words, but only the top 16 bits are used
+   in most cases. The lower 16 bits are completely unreliable (due to the
+   fact that the update is done only on the top bits), but help in the
+   adaptation -- probably by removing a "threshold effect" due to
+   quantization (rounding going to zero) when the gradient is small.
+   
+   Another kludge that seems to work good: when performing the weight
+   update, we only move half the way toward the "goal" this seems to
+   reduce the effect of quantization noise in the update phase. This
+   can be seen as applying a gradient descent on a "soft constraint"
+   instead of having a hard constraint.
+   
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "misc.h"
+#include "speex/speex_echo.h"
+#include "fftwrap.h"
+#include "pseudofloat.h"
+#include "math_approx.h"
+
+#ifndef M_PI
+#define M_PI 3.14159265358979323846
+#endif
+
+#define min(a,b) ((a)<(b) ? (a) : (b))
+#define max(a,b) ((a)>(b) ? (a) : (b))
+
+#ifdef FIXED_POINT
+#define WEIGHT_SHIFT 11
+#define NORMALIZE_SCALEDOWN 5
+#define NORMALIZE_SCALEUP 3
+#else
+#define WEIGHT_SHIFT 0
+#endif
+
+/* If enabled, the transition between blocks is smooth, so there isn't any blocking
+aftifact when adapting. The cost is an extra FFT and a matrix-vector multiply */
+#define SMOOTH_BLOCKS
+
+#ifdef FIXED_POINT
+static const spx_float_t MIN_LEAK = {16777, -19};
+#define TOP16(x) ((x)>>16)
+#else
+static const spx_float_t MIN_LEAK = .032f;
+#define TOP16(x) (x)
+#endif
+
+
+/** Speex echo cancellation state. */
+struct SpeexEchoState_ {
+   int frame_size;           /**< Number of samples processed each time */
+   int window_size;
+   int M;
+   int cancel_count;
+   int adapted;
+   int saturated;
+   spx_int32_t sampling_rate;
+   spx_word16_t spec_average;
+   spx_word16_t beta0;
+   spx_word16_t beta_max;
+   spx_word32_t sum_adapt;
+   spx_word16_t *e;
+   spx_word16_t *x;
+   spx_word16_t *X;
+   spx_word16_t *d;
+   spx_word16_t *y;
+   spx_word16_t *last_y;
+   spx_word32_t *Yps;
+   spx_word16_t *Y;
+   spx_word16_t *E;
+   spx_word32_t *PHI;
+   spx_word32_t *W;
+   spx_word32_t *power;
+   spx_float_t *power_1;
+   spx_word16_t *wtmp;
+#ifdef FIXED_POINT
+   spx_word16_t *wtmp2;
+#endif
+   spx_word32_t *Rf;
+   spx_word32_t *Yf;
+   spx_word32_t *Xf;
+   spx_word32_t *Eh;
+   spx_word32_t *Yh;
+   spx_float_t Pey;
+   spx_float_t Pyy;
+   spx_word16_t *window;
+   spx_word16_t *prop;
+   void *fft_table;
+   spx_word16_t memX, memD, memE;
+   spx_word16_t preemph;
+   spx_word16_t notch_radius;
+   spx_mem_t notch_mem[2];
+
+   /* NOTE: If you only use speex_echo_cancel() and want to save some memory, remove this */
+   spx_int16_t *play_buf;
+   int play_buf_pos;
+};
+
+static inline void filter_dc_notch16(const spx_int16_t *in, spx_word16_t radius, spx_word16_t *out, int len, spx_mem_t *mem)
+{
+   int i;
+   spx_word16_t den2;
+#ifdef FIXED_POINT
+   den2 = MULT16_16_Q15(radius,radius) + MULT16_16_Q15(QCONST16(.7,15),MULT16_16_Q15(32767-radius,32767-radius));
+#else
+   den2 = radius*radius + .7*(1-radius)*(1-radius);
+#endif   
+   /*printf ("%d %d %d %d %d %d\n", num[0], num[1], num[2], den[0], den[1], den[2]);*/
+   for (i=0;i<len;i++)
+   {
+      spx_word16_t vin = in[i];
+      spx_word32_t vout = mem[0] + SHL32(EXTEND32(vin),15);
+#ifdef FIXED_POINT
+      mem[0] = mem[1] + SHL32(SHL32(-EXTEND32(vin),15) + MULT16_32_Q15(radius,vout),1);
+#else
+      mem[0] = mem[1] + 2*(-vin + radius*vout);
+#endif
+      mem[1] = SHL32(EXTEND32(vin),15) - MULT16_32_Q15(den2,vout);
+      out[i] = SATURATE32(PSHR32(MULT16_32_Q15(radius,vout),15),32767);
+   }
+}
+
+static inline spx_word32_t mdf_inner_prod(const spx_word16_t *x, const spx_word16_t *y, int len)
+{
+   spx_word32_t sum=0;
+   len >>= 1;
+   while(len--)
+   {
+      spx_word32_t part=0;
+      part = MAC16_16(part,*x++,*y++);
+      part = MAC16_16(part,*x++,*y++);
+      /* HINT: If you had a 40-bit accumulator, you could shift only at the end */
+      sum = ADD32(sum,SHR32(part,6));
+   }
+   return sum;
+}
+
+/** Compute power spectrum of a half-complex (packed) vector */
+static inline void power_spectrum(const spx_word16_t *X, spx_word32_t *ps, int N)
+{
+   int i, j;
+   ps[0]=MULT16_16(X[0],X[0]);
+   for (i=1,j=1;i<N-1;i+=2,j++)
+   {
+      ps[j] =  MULT16_16(X[i],X[i]) + MULT16_16(X[i+1],X[i+1]);
+   }
+   ps[j]=MULT16_16(X[i],X[i]);
+}
+
+/** Compute cross-power spectrum of a half-complex (packed) vectors and add to acc */
+#ifdef FIXED_POINT
+static inline void spectral_mul_accum(const spx_word16_t *X, const spx_word32_t *Y, spx_word16_t *acc, int N, int M)
+{
+   int i,j;
+   spx_word32_t tmp1=0,tmp2=0;
+   for (j=0;j<M;j++)
+   {
+      tmp1 = MAC16_16(tmp1, X[j*N],TOP16(Y[j*N]));
+   }
+   acc[0] = PSHR32(tmp1,WEIGHT_SHIFT);
+   for (i=1;i<N-1;i+=2)
+   {
+      tmp1 = tmp2 = 0;
+      for (j=0;j<M;j++)
+      {
+         tmp1 = SUB32(MAC16_16(tmp1, X[j*N+i],TOP16(Y[j*N+i])), MULT16_16(X[j*N+i+1],TOP16(Y[j*N+i+1])));
+         tmp2 = MAC16_16(MAC16_16(tmp2, X[j*N+i+1],TOP16(Y[j*N+i])), X[j*N+i], TOP16(Y[j*N+i+1]));
+      }
+      acc[i] = PSHR32(tmp1,WEIGHT_SHIFT);
+      acc[i+1] = PSHR32(tmp2,WEIGHT_SHIFT);
+   }
+   tmp1 = tmp2 = 0;
+   for (j=0;j<M;j++)
+   {
+      tmp1 = MAC16_16(tmp1, X[(j+1)*N-1],TOP16(Y[(j+1)*N-1]));
+   }
+   acc[N-1] = PSHR32(tmp1,WEIGHT_SHIFT);
+}
+#else
+static inline void spectral_mul_accum(const spx_word16_t *X, const spx_word32_t *Y, spx_word16_t *acc, int N, int M)
+{
+   int i,j;
+   for (i=0;i<N;i++)
+      acc[i] = 0;
+   for (j=0;j<M;j++)
+   {
+      acc[0] += X[0]*Y[0];
+      for (i=1;i<N-1;i+=2)
+      {
+         acc[i] += (X[i]*Y[i] - X[i+1]*Y[i+1]);
+         acc[i+1] += (X[i+1]*Y[i] + X[i]*Y[i+1]);
+      }
+      acc[i] += X[i]*Y[i];
+      X += N;
+      Y += N;
+   }
+}
+#endif
+
+/** Compute weighted cross-power spectrum of a half-complex (packed) vector with conjugate */
+static inline void weighted_spectral_mul_conj(const spx_float_t *w, const spx_word16_t *X, const spx_word16_t *Y, spx_word32_t *prod, int N)
+{
+   int i, j;
+   prod[0] = FLOAT_MUL32(w[0],MULT16_16(X[0],Y[0]));
+   for (i=1,j=1;i<N-1;i+=2,j++)
+   {
+      prod[i] = FLOAT_MUL32(w[j],MAC16_16(MULT16_16(X[i],Y[i]), X[i+1],Y[i+1]));
+      prod[i+1] = FLOAT_MUL32(w[j],MAC16_16(MULT16_16(-X[i+1],Y[i]), X[i],Y[i+1]));
+   }
+   prod[i] = FLOAT_MUL32(w[j],MULT16_16(X[i],Y[i]));
+}
+
+
+/** Creates a new echo canceller state */
+SpeexEchoState *speex_echo_state_init(int frame_size, int filter_length)
+{
+   int i,N,M;
+   SpeexEchoState *st = (SpeexEchoState *)speex_alloc(sizeof(SpeexEchoState));
+
+   st->frame_size = frame_size;
+   st->window_size = 2*frame_size;
+   N = st->window_size;
+   M = st->M = (filter_length+st->frame_size-1)/frame_size;
+   st->cancel_count=0;
+   st->sum_adapt = 0;
+   st->saturated = 0;
+   /* FIXME: Make that an init option (new API call?) */
+   st->sampling_rate = 8000;
+   st->spec_average = DIV32_16(SHL32(EXTEND32(st->frame_size), 15), st->sampling_rate);
+#ifdef FIXED_POINT
+   st->beta0 = DIV32_16(SHL32(EXTEND32(st->frame_size), 16), st->sampling_rate);
+   st->beta_max = DIV32_16(SHL32(EXTEND32(st->frame_size), 14), st->sampling_rate);
+#else
+   st->beta0 = (2.0f*st->frame_size)/st->sampling_rate;
+   st->beta_max = (.5f*st->frame_size)/st->sampling_rate;
+#endif
+
+   st->fft_table = spx_fft_init(N);
+   
+   st->e = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t));
+   st->x = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t));
+   st->d = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t));
+   st->y = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t));
+   st->Yps = (spx_word32_t*)speex_alloc(N*sizeof(spx_word32_t));
+   st->last_y = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t));
+   st->Yf = (spx_word32_t*)speex_alloc((st->frame_size+1)*sizeof(spx_word32_t));
+   st->Rf = (spx_word32_t*)speex_alloc((st->frame_size+1)*sizeof(spx_word32_t));
+   st->Xf = (spx_word32_t*)speex_alloc((st->frame_size+1)*sizeof(spx_word32_t));
+   st->Yh = (spx_word32_t*)speex_alloc((st->frame_size+1)*sizeof(spx_word32_t));
+   st->Eh = (spx_word32_t*)speex_alloc((st->frame_size+1)*sizeof(spx_word32_t));
+
+   st->X = (spx_word16_t*)speex_alloc((M+1)*N*sizeof(spx_word16_t));
+   st->Y = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t));
+   st->E = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t));
+   st->W = (spx_word32_t*)speex_alloc(M*N*sizeof(spx_word32_t));
+   st->PHI = (spx_word32_t*)speex_alloc(N*sizeof(spx_word32_t));
+   st->power = (spx_word32_t*)speex_alloc((frame_size+1)*sizeof(spx_word32_t));
+   st->power_1 = (spx_float_t*)speex_alloc((frame_size+1)*sizeof(spx_float_t));
+   st->window = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t));
+   st->prop = (spx_word16_t*)speex_alloc(M*sizeof(spx_word16_t));
+   st->wtmp = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t));
+#ifdef FIXED_POINT
+   st->wtmp2 = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t));
+   for (i=0;i<N>>1;i++)
+   {
+      st->window[i] = (16383-SHL16(spx_cos(DIV32_16(MULT16_16(25736,i<<1),N)),1));
+      st->window[N-i-1] = st->window[i];
+   }
+#else
+   for (i=0;i<N;i++)
+      st->window[i] = .5-.5*cos(2*M_PI*i/N);
+#endif
+   for (i=0;i<=st->frame_size;i++)
+      st->power_1[i] = FLOAT_ONE;
+   for (i=0;i<N*M;i++)
+      st->W[i] = 0;
+   for (i=0;i<N;i++)
+      st->PHI[i] = 0;
+   {
+      spx_word32_t sum = 0;
+      /* Ratio of ~10 between adaptation rate of first and last block */
+      spx_word16_t decay = QCONST16(exp(-2.4/M),15);
+      st->prop[0] = QCONST16(.7, 15);
+      sum = EXTEND32(st->prop[0]);
+      for (i=1;i<M;i++)
+      {
+         st->prop[i] = MULT16_16_Q15(st->prop[i-1], decay);
+         sum = ADD32(sum, EXTEND32(st->prop[i]));
+      }
+      for (i=M-1;i>=0;i--)
+      {
+         st->prop[i] = DIV32(MULT16_16(QCONST16(.8,15), st->prop[i]),sum);
+      }
+   }
+   
+   st->memX=st->memD=st->memE=0;
+   st->preemph = QCONST16(.9,15);
+   if (st->sampling_rate<12000)
+      st->notch_radius = QCONST16(.9, 15);
+   else if (st->sampling_rate<24000)
+      st->notch_radius = QCONST16(.982, 15);
+   else
+      st->notch_radius = QCONST16(.992, 15);
+
+   st->notch_mem[0] = st->notch_mem[1] = 0;
+   st->adapted = 0;
+   st->Pey = st->Pyy = FLOAT_ONE;
+   
+   st->play_buf = (spx_int16_t*)speex_alloc(2*st->frame_size*sizeof(spx_int16_t));
+   st->play_buf_pos = 0;
+
+   return st;
+}
+
+/** Resets echo canceller state */
+void speex_echo_state_reset(SpeexEchoState *st)
+{
+   int i, M, N;
+   st->cancel_count=0;
+   N = st->window_size;
+   M = st->M;
+   for (i=0;i<N*M;i++)
+      st->W[i] = 0;
+   for (i=0;i<N*(M+1);i++)
+      st->X[i] = 0;
+   for (i=0;i<=st->frame_size;i++)
+      st->power[i] = 0;
+   for (i=0;i<N;i++)
+      st->E[i] = 0;
+   st->notch_mem[0] = st->notch_mem[1] = 0;
+  
+   st->saturated = 0;
+   st->adapted = 0;
+   st->sum_adapt = 0;
+   st->Pey = st->Pyy = FLOAT_ONE;
+   st->play_buf_pos = 0;
+
+}
+
+/** Destroys an echo canceller state */
+void speex_echo_state_destroy(SpeexEchoState *st)
+{
+   spx_fft_destroy(st->fft_table);
+
+   speex_free(st->e);
+   speex_free(st->x);
+   speex_free(st->d);
+   speex_free(st->y);
+   speex_free(st->last_y);
+   speex_free(st->Yps);
+   speex_free(st->Yf);
+   speex_free(st->Rf);
+   speex_free(st->Xf);
+   speex_free(st->Yh);
+   speex_free(st->Eh);
+
+   speex_free(st->X);
+   speex_free(st->Y);
+   speex_free(st->E);
+   speex_free(st->W);
+   speex_free(st->PHI);
+   speex_free(st->power);
+   speex_free(st->power_1);
+   speex_free(st->window);
+   speex_free(st->prop);
+   speex_free(st->wtmp);
+#ifdef FIXED_POINT
+   speex_free(st->wtmp2);
+#endif
+   speex_free(st->play_buf);
+   speex_free(st);
+}
+
+void speex_echo_capture(SpeexEchoState *st, const spx_int16_t *rec, spx_int16_t *out, spx_int32_t *Yout)
+{
+   int i;
+   if (st->play_buf_pos>=st->frame_size)
+   {
+      speex_echo_cancel(st, rec, st->play_buf, out, Yout);
+      st->play_buf_pos -= st->frame_size;
+      for (i=0;i<st->frame_size;i++)
+         st->play_buf[i] = st->play_buf[i+st->frame_size];
+   } else {
+      speex_warning("no playback frame available");
+      if (st->play_buf_pos!=0)
+      {
+         speex_warning("internal playback buffer corruption?");
+         st->play_buf_pos = 0;
+      }
+      for (i=0;i<st->frame_size;i++)
+         out[i] = rec[i];
+   }
+}
+
+void speex_echo_playback(SpeexEchoState *st, const spx_int16_t *play)
+{
+   if (st->play_buf_pos<=st->frame_size)
+   {
+      int i;
+      for (i=0;i<st->frame_size;i++)
+         st->play_buf[st->play_buf_pos+i] = play[i];
+      st->play_buf_pos += st->frame_size;
+   } else {
+      speex_warning("had to discard a playback frame");
+   }
+}
+
+/** Performs echo cancellation on a frame */
+void speex_echo_cancel(SpeexEchoState *st, const spx_int16_t *ref, const spx_int16_t *echo, spx_int16_t *out, spx_int32_t *Yout)
+{
+   int i,j;
+   int N,M;
+   spx_word32_t Syy,See,Sxx;
+   spx_word32_t Sey;
+   spx_word16_t leak_estimate;
+   spx_word16_t ss, ss_1;
+   spx_float_t Pey = FLOAT_ONE, Pyy=FLOAT_ONE;
+   spx_float_t alpha, alpha_1;
+   spx_word16_t RER;
+   spx_word32_t tmp32;
+   
+   N = st->window_size;
+   M = st->M;
+   st->cancel_count++;
+#ifdef FIXED_POINT
+   ss=DIV32_16(11469,M);
+   ss_1 = SUB16(32767,ss);
+#else
+   ss=.35/M;
+   ss_1 = 1-ss;
+#endif
+
+   filter_dc_notch16(ref, st->notch_radius, st->d, st->frame_size, st->notch_mem);
+   /* Copy input data to buffer */
+   for (i=0;i<st->frame_size;i++)
+   {
+      spx_word16_t tmp;
+      spx_word32_t tmp32;
+      st->x[i] = st->x[i+st->frame_size];
+      tmp32 = SUB32(EXTEND32(echo[i]), EXTEND32(MULT16_16_P15(st->preemph, st->memX)));
+#ifdef FIXED_POINT
+      /*FIXME: If saturation occurs here, we need to freeze adaptation for M frames (not just one) */
+      if (tmp32 > 32767)
+      {
+         tmp32 = 32767;
+         st->saturated = 1;
+      }      
+      if (tmp32 < -32767)
+      {
+         tmp32 = -32767;
+         st->saturated = 1;
+      }      
+#endif
+      st->x[i+st->frame_size] = EXTRACT16(tmp32);
+      st->memX = echo[i];
+      
+      tmp = st->d[i];
+      st->d[i] = st->d[i+st->frame_size];
+      tmp32 = SUB32(EXTEND32(tmp), EXTEND32(MULT16_16_P15(st->preemph, st->memD)));
+#ifdef FIXED_POINT
+      if (tmp32 > 32767)
+      {
+         tmp32 = 32767;
+         st->saturated = 1;
+      }      
+      if (tmp32 < -32767)
+      {
+         tmp32 = -32767;
+         st->saturated = 1;
+      }
+#endif
+      st->d[i+st->frame_size] = tmp32;
+      st->memD = tmp;
+   }
+
+   /* Shift memory: this could be optimized eventually*/
+   for (j=M-1;j>=0;j--)
+   {
+      for (i=0;i<N;i++)
+         st->X[(j+1)*N+i] = st->X[j*N+i];
+   }
+
+   /* Convert x (echo input) to frequency domain */
+   spx_fft(st->fft_table, st->x, &st->X[0]);
+   
+#ifdef SMOOTH_BLOCKS
+   spectral_mul_accum(st->X, st->W, st->Y, N, M);   
+   spx_ifft(st->fft_table, st->Y, st->e);
+#endif
+
+   /* Compute weight gradient */
+   if (!st->saturated)
+   {
+      for (j=M-1;j>=0;j--)
+      {
+         weighted_spectral_mul_conj(st->power_1, &st->X[(j+1)*N], st->E, st->PHI, N);
+         for (i=0;i<N;i++)
+            st->W[j*N+i] += MULT16_32_Q15(st->prop[j], st->PHI[i]);
+         
+      }   
+   }
+   
+   st->saturated = 0;
+   
+   /* Update weight to prevent circular convolution (MDF / AUMDF) */
+   for (j=0;j<M;j++)
+   {
+      /* This is a variant of the Alternatively Updated MDF (AUMDF) */
+      /* Remove the "if" to make this an MDF filter */
+      if (j==0 || st->cancel_count%(M-1) == j-1)
+      {
+#ifdef FIXED_POINT
+         for (i=0;i<N;i++)
+            st->wtmp2[i] = EXTRACT16(PSHR32(st->W[j*N+i],NORMALIZE_SCALEDOWN+16));
+         spx_ifft(st->fft_table, st->wtmp2, st->wtmp);
+         for (i=0;i<st->frame_size;i++)
+         {
+            st->wtmp[i]=0;
+         }
+         for (i=st->frame_size;i<N;i++)
+         {
+            st->wtmp[i]=SHL16(st->wtmp[i],NORMALIZE_SCALEUP);
+         }
+         spx_fft(st->fft_table, st->wtmp, st->wtmp2);
+         /* The "-1" in the shift is a sort of kludge that trades less efficient update speed for decrease noise */
+         for (i=0;i<N;i++)
+            st->W[j*N+i] -= SHL32(EXTEND32(st->wtmp2[i]),16+NORMALIZE_SCALEDOWN-NORMALIZE_SCALEUP-1);
+#else
+         spx_ifft(st->fft_table, &st->W[j*N], st->wtmp);
+         for (i=st->frame_size;i<N;i++)
+         {
+            st->wtmp[i]=0;
+         }
+         spx_fft(st->fft_table, st->wtmp, &st->W[j*N]);
+#endif
+      }
+   }
+
+   /* Compute filter response Y */
+   spectral_mul_accum(st->X, st->W, st->Y, N, M);
+   spx_ifft(st->fft_table, st->Y, st->y);
+
+   
+   /* Compute error signal (for the output with de-emphasis) */ 
+   for (i=0;i<st->frame_size;i++)
+   {
+      spx_word32_t tmp_out;
+#ifdef SMOOTH_BLOCKS
+      spx_word16_t y = MULT16_16_Q15(st->window[i+st->frame_size],st->e[i+st->frame_size]) + MULT16_16_Q15(st->window[i],st->y[i+st->frame_size]);
+      tmp_out = SUB32(EXTEND32(st->d[i+st->frame_size]), EXTEND32(y));
+#else
+      tmp_out = SUB32(EXTEND32(st->d[i+st->frame_size]), EXTEND32(st->y[i+st->frame_size]));
+#endif
+
+      /* Saturation */
+      if (tmp_out>32767)
+         tmp_out = 32767;
+      else if (tmp_out<-32768)
+         tmp_out = -32768;
+      tmp_out = ADD32(tmp_out, EXTEND32(MULT16_16_P15(st->preemph, st->memE)));
+      /* This is an arbitrary test for saturation */
+      if (ref[i] <= -32000 || ref[i] >= 32000)
+      {
+         tmp_out = 0;
+         st->saturated = 1;
+      }
+      out[i] = (spx_int16_t)tmp_out;
+      st->memE = tmp_out;
+   }
+
+   /* Compute error signal (filter update version) */ 
+   for (i=0;i<st->frame_size;i++)
+   {
+      st->e[i] = 0;
+      st->e[i+st->frame_size] = st->d[i+st->frame_size] - st->y[i+st->frame_size];
+   }
+
+   /* Compute a bunch of correlations */
+   Sey = mdf_inner_prod(st->e+st->frame_size, st->y+st->frame_size, st->frame_size);
+   See = mdf_inner_prod(st->e+st->frame_size, st->e+st->frame_size, st->frame_size);
+   See = ADD32(See, SHR32(MULT16_16(N, 100),6));
+   Syy = mdf_inner_prod(st->y+st->frame_size, st->y+st->frame_size, st->frame_size);
+   Sxx = mdf_inner_prod(st->x+st->frame_size, st->x+st->frame_size, st->frame_size);
+
+   /* Convert error to frequency domain */
+   spx_fft(st->fft_table, st->e, st->E);
+   for (i=0;i<st->frame_size;i++)
+      st->y[i] = 0;
+   spx_fft(st->fft_table, st->y, st->Y);
+
+   /* Compute power spectrum of echo (X), error (E) and filter response (Y) */
+   power_spectrum(st->E, st->Rf, N);
+   power_spectrum(st->Y, st->Yf, N);
+   power_spectrum(st->X, st->Xf, N);
+   
+   /* Smooth echo energy estimate over time */
+   for (j=0;j<=st->frame_size;j++)
+      st->power[j] = MULT16_32_Q15(ss_1,st->power[j]) + 1 + MULT16_32_Q15(ss,st->Xf[j]);
+   
+   /* Enable this to compute the power based only on the tail (would need to compute more 
+      efficiently to make this really useful */
+   if (0)
+   {
+      float scale2 = .5f/M;
+      for (j=0;j<=st->frame_size;j++)
+         st->power[j] = 100;
+      for (i=0;i<M;i++)
+      {
+         power_spectrum(&st->X[i*N], st->Xf, N);
+         for (j=0;j<=st->frame_size;j++)
+            st->power[j] += scale2*st->Xf[j];
+      }
+   }
+
+   /* Compute filtered spectra and (cross-)correlations */
+   for (j=st->frame_size;j>=0;j--)
+   {
+      spx_float_t Eh, Yh;
+      Eh = PSEUDOFLOAT(st->Rf[j] - st->Eh[j]);
+      Yh = PSEUDOFLOAT(st->Yf[j] - st->Yh[j]);
+      Pey = FLOAT_ADD(Pey,FLOAT_MULT(Eh,Yh));
+      Pyy = FLOAT_ADD(Pyy,FLOAT_MULT(Yh,Yh));
+#ifdef FIXED_POINT
+      st->Eh[j] = MAC16_32_Q15(MULT16_32_Q15(SUB16(32767,st->spec_average),st->Eh[j]), st->spec_average, st->Rf[j]);
+      st->Yh[j] = MAC16_32_Q15(MULT16_32_Q15(SUB16(32767,st->spec_average),st->Yh[j]), st->spec_average, st->Yf[j]);
+#else
+      st->Eh[j] = (1-st->spec_average)*st->Eh[j] + st->spec_average*st->Rf[j];
+      st->Yh[j] = (1-st->spec_average)*st->Yh[j] + st->spec_average*st->Yf[j];
+#endif
+   }
+   
+   Pyy = FLOAT_SQRT(Pyy);
+   Pey = FLOAT_DIVU(Pey,Pyy);
+
+   /* Compute correlation updatete rate */
+   tmp32 = MULT16_32_Q15(st->beta0,Syy);
+   if (tmp32 > MULT16_32_Q15(st->beta_max,See))
+      tmp32 = MULT16_32_Q15(st->beta_max,See);
+   alpha = FLOAT_DIV32(tmp32, See);
+   alpha_1 = FLOAT_SUB(FLOAT_ONE, alpha);
+   /* Update correlations (recursive average) */
+   st->Pey = FLOAT_ADD(FLOAT_MULT(alpha_1,st->Pey) , FLOAT_MULT(alpha,Pey));
+   st->Pyy = FLOAT_ADD(FLOAT_MULT(alpha_1,st->Pyy) , FLOAT_MULT(alpha,Pyy));
+   if (FLOAT_LT(st->Pyy, FLOAT_ONE))
+      st->Pyy = FLOAT_ONE;
+   /* We don't really hope to get better than 33 dB (MIN_LEAK-3dB) attenuation anyway */
+   if (FLOAT_LT(st->Pey, FLOAT_MULT(MIN_LEAK,st->Pyy)))
+      st->Pey = FLOAT_MULT(MIN_LEAK,st->Pyy);
+   if (FLOAT_GT(st->Pey, st->Pyy))
+      st->Pey = st->Pyy;
+   /* leak_estimate is the linear regression result */
+   leak_estimate = FLOAT_EXTRACT16(FLOAT_SHL(FLOAT_DIVU(st->Pey, st->Pyy),14));
+   /* This looks like a stupid bug, but it's right (because we convert from Q14 to Q15) */
+   if (leak_estimate > 16383)
+      leak_estimate = 32767;
+   else
+      leak_estimate = SHL16(leak_estimate,1);
+   /*printf ("%f\n", leak_estimate);*/
+   
+   /* Compute Residual to Error Ratio */
+#ifdef FIXED_POINT
+   tmp32 = MULT16_32_Q15(leak_estimate,Syy);
+   tmp32 = ADD32(SHR32(Sxx,13), ADD32(tmp32, SHL32(tmp32,1)));
+   /* Check for y in e (lower bound on RER) */
+   {
+      spx_float_t bound = PSEUDOFLOAT(Sey);
+      bound = FLOAT_DIVU(FLOAT_MULT(bound, bound), PSEUDOFLOAT(ADD32(1,Syy)));
+      if (FLOAT_GT(bound, PSEUDOFLOAT(See)))
+         tmp32 = See;
+      else if (tmp32 < FLOAT_EXTRACT32(bound))
+         tmp32 = FLOAT_EXTRACT32(bound);
+   }
+   if (tmp32 > SHR32(See,1))
+      tmp32 = SHR32(See,1);
+   RER = FLOAT_EXTRACT16(FLOAT_SHL(FLOAT_DIV32(tmp32,See),15));
+#else
+   RER = (.0001*Sxx + 3.*MULT16_32_Q15(leak_estimate,Syy)) / See;
+   /* Check for y in e (lower bound on RER) */
+   if (RER < Sey*Sey/(1+See*Syy))
+      RER = Sey*Sey/(1+See*Syy);
+   if (RER > .5)
+      RER = .5;
+#endif
+
+   /* We consider that the filter has had minimal adaptation if the following is true*/
+   if (!st->adapted && st->sum_adapt > QCONST32(1,15))
+   {
+      st->adapted = 1;
+   }
+
+   if (st->adapted)
+   {
+      for (i=0;i<=st->frame_size;i++)
+      {
+         spx_word32_t r, e;
+         /* Compute frequency-domain adaptation mask */
+         r = MULT16_32_Q15(leak_estimate,SHL32(st->Yf[i],3));
+         e = SHL32(st->Rf[i],3)+1;
+#ifdef FIXED_POINT
+         if (r>SHR32(e,1))
+            r = SHR32(e,1);
+#else
+         if (r>.5*e)
+            r = .5*e;
+#endif
+         r = MULT16_32_Q15(QCONST16(.7,15),r) + MULT16_32_Q15(QCONST16(.3,15),(spx_word32_t)(MULT16_32_Q15(RER,e)));
+         /*st->power_1[i] = adapt_rate*r/(e*(1+st->power[i]));*/
+         st->power_1[i] = FLOAT_SHL(FLOAT_DIV32_FLOAT(r,FLOAT_MUL32U(e,st->power[i]+10)),WEIGHT_SHIFT+16);
+      }
+   } else if (Sxx > SHR32(MULT16_16(N, 1000),6)) {
+      /* Temporary adaption rate if filter is not yet adapted enough */
+      spx_word16_t adapt_rate=0;
+
+      tmp32 = MULT16_32_Q15(QCONST16(.25f, 15), Sxx);
+#ifdef FIXED_POINT
+      if (tmp32 > SHR32(See,2))
+         tmp32 = SHR32(See,2);
+#else
+      if (tmp32 > .25*See)
+         tmp32 = .25*See;
+#endif
+      adapt_rate = FLOAT_EXTRACT16(FLOAT_SHL(FLOAT_DIV32(tmp32, See),15));
+      
+      for (i=0;i<=st->frame_size;i++)
+         st->power_1[i] = FLOAT_SHL(FLOAT_DIV32(EXTEND32(adapt_rate),ADD32(st->power[i],10)),WEIGHT_SHIFT+1);
+
+
+      /* How much have we adapted so far? */
+      st->sum_adapt = ADD32(st->sum_adapt,adapt_rate);
+   }
+
+   /* Compute spectrum of estimated echo for use in an echo post-filter (if necessary)*/
+   if (Yout)
+   {
+      spx_word16_t leak2;
+      if (st->adapted)
+      {
+         /* If the filter is adapted, take the filtered echo */
+         for (i=0;i<st->frame_size;i++)
+            st->last_y[i] = st->last_y[st->frame_size+i];
+         for (i=0;i<st->frame_size;i++)
+            st->last_y[st->frame_size+i] = ref[i]-out[i];
+      } else {
+         /* If filter isn't adapted yet, all we can do is take the echo signal directly */
+         for (i=0;i<N;i++)
+            st->last_y[i] = st->x[i];
+      }
+      
+      /* Apply hanning window (should pre-compute it)*/
+      for (i=0;i<N;i++)
+         st->y[i] = MULT16_16_Q15(st->window[i],st->last_y[i]);
+      
+      /* Compute power spectrum of the echo */
+      spx_fft(st->fft_table, st->y, st->Y);
+      power_spectrum(st->Y, st->Yps, N);
+      
+#ifdef FIXED_POINT
+      if (leak_estimate > 16383)
+         leak2 = 32767;
+      else
+         leak2 = SHL16(leak_estimate, 1);
+#else
+      if (leak_estimate>.5)
+         leak2 = 1;
+      else
+         leak2 = 2*leak_estimate;
+#endif
+      /* Estimate residual echo */
+      for (i=0;i<=st->frame_size;i++)
+         Yout[i] = (spx_int32_t)MULT16_32_Q15(leak2,st->Yps[i]);
+   }
+}
+
+
+int speex_echo_ctl(SpeexEchoState *st, int request, void *ptr)
+{
+   switch(request)
+   {
+      
+      case SPEEX_ECHO_GET_FRAME_SIZE:
+         (*(int*)ptr) = st->frame_size;
+         break;
+      case SPEEX_ECHO_SET_SAMPLING_RATE:
+         st->sampling_rate = (*(int*)ptr);
+         st->spec_average = DIV32_16(SHL32(EXTEND32(st->frame_size), 15), st->sampling_rate);
+#ifdef FIXED_POINT
+         st->beta0 = DIV32_16(SHL32(EXTEND32(st->frame_size), 16), st->sampling_rate);
+         st->beta_max = DIV32_16(SHL32(EXTEND32(st->frame_size), 14), st->sampling_rate);
+#else
+         st->beta0 = (2.0f*st->frame_size)/st->sampling_rate;
+         st->beta_max = (.5f*st->frame_size)/st->sampling_rate;
+#endif
+         if (st->sampling_rate<12000)
+            st->notch_radius = QCONST16(.9, 15);
+         else if (st->sampling_rate<24000)
+            st->notch_radius = QCONST16(.982, 15);
+         else
+            st->notch_radius = QCONST16(.992, 15);
+         break;
+      case SPEEX_ECHO_GET_SAMPLING_RATE:
+         (*(int*)ptr) = st->sampling_rate;
+         break;
+      default:
+         speex_warning_int("Unknown speex_echo_ctl request: ", request);
+         return -1;
+   }
+   return 0;
+}

Added: freeswitch/trunk/libs/speex/libspeex/misc.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/misc.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,225 @@
+/* Copyright (C) 2002-2005 Jean-Marc Valin 
+   File: misc.c
+   Various utility routines for Speex
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include "misc.h"
+
+#ifdef USER_MISC
+#include "user_misc.h"
+#endif
+
+#ifdef BFIN_ASM
+#include "misc_bfin.h"
+#endif
+
+#ifndef RELEASE
+void print_vec(float *vec, int len, char *name)
+{
+   int i;
+   printf ("%s ", name);
+   for (i=0;i<len;i++)
+      printf (" %f", vec[i]);
+   printf ("\n");
+}
+#endif
+
+#ifdef FIXED_DEBUG
+long long spx_mips=0;
+#endif
+
+
+spx_uint32_t be_int(spx_uint32_t i)
+{
+   spx_uint32_t ret=i;
+#ifndef WORDS_BIGENDIAN
+   ret =  i>>24;
+   ret += (i>>8)&0x0000ff00;
+   ret += (i<<8)&0x00ff0000;
+   ret += (i<<24);
+#endif
+   return ret;
+}
+
+spx_uint32_t le_int(spx_uint32_t i)
+{
+   spx_uint32_t ret=i;
+#ifdef WORDS_BIGENDIAN
+   ret =  i>>24;
+   ret += (i>>8)&0x0000ff00;
+   ret += (i<<8)&0x00ff0000;
+   ret += (i<<24);
+#endif
+   return ret;
+}
+
+#if BYTES_PER_CHAR == 2
+void speex_memcpy_bytes(char *dst, char *src, int nbytes)
+{
+  int i;
+  int nchars = nbytes/BYTES_PER_CHAR;
+  for (i=0;i<nchars;i++)
+    dst[i]=src[i];
+  if (nbytes & 1) {
+    /* copy in the last byte */
+    int last_i = nchars;
+    char last_dst_char = dst[last_i];
+    char last_src_char = src[last_i];
+    last_dst_char &= 0xff00;
+    last_dst_char |= (last_src_char & 0x00ff);
+    dst[last_i] = last_dst_char;
+  }
+}
+void speex_memset_bytes(char *dst, char c, int nbytes)
+{
+  int i;
+  spx_int16_t cc = ((c << 8) | c);
+  int nchars = nbytes/BYTES_PER_CHAR;
+  for (i=0;i<nchars;i++)
+    dst[i]=cc;
+  if (nbytes & 1) {
+    /* copy in the last byte */
+    int last_i = nchars;
+    char last_dst_char = dst[last_i];
+    last_dst_char &= 0xff00;
+    last_dst_char |= (c & 0x00ff);
+    dst[last_i] = last_dst_char;
+  }
+}
+#else
+void speex_memcpy_bytes(char *dst, char *src, int nbytes)
+{
+  memcpy(dst, src, nbytes);
+}
+void speex_memset_bytes(char *dst, char src, int nbytes)
+{
+  memset(dst, src, nbytes);
+}
+#endif
+
+#ifndef OVERRIDE_SPEEX_ALLOC
+void *speex_alloc (int size)
+{
+   return calloc(size,1);
+}
+#endif
+
+#ifndef OVERRIDE_SPEEX_ALLOC_SCRATCH
+void *speex_alloc_scratch (int size)
+{
+   return calloc(size,1);
+}
+#endif
+
+#ifndef OVERRIDE_SPEEX_REALLOC
+void *speex_realloc (void *ptr, int size)
+{
+   return realloc(ptr, size);
+}
+#endif
+
+#ifndef OVERRIDE_SPEEX_FREE
+void speex_free (void *ptr)
+{
+   free(ptr);
+}
+#endif
+
+#ifndef OVERRIDE_SPEEX_FREE_SCRATCH
+void speex_free_scratch (void *ptr)
+{
+   free(ptr);
+}
+#endif
+
+#ifndef OVERRIDE_SPEEX_MOVE
+void *speex_move (void *dest, void *src, int n)
+{
+   return memmove(dest,src,n);
+}
+#endif
+
+#ifndef OVERRIDE_SPEEX_ERROR
+void speex_error(const char *str)
+{
+   fprintf (stderr, "Fatal error: %s\n", str);
+   exit(1);
+}
+#endif
+
+#ifndef OVERRIDE_SPEEX_WARNING
+void speex_warning(const char *str)
+{
+   fprintf (stderr, "warning: %s\n", str);
+}
+#endif
+
+#ifndef OVERRIDE_SPEEX_WARNING_INT
+void speex_warning_int(const char *str, int val)
+{
+   fprintf (stderr, "warning: %s %d\n", str, val);
+}
+#endif
+
+#ifdef FIXED_POINT
+spx_word16_t speex_rand(spx_word16_t std, spx_int32_t *seed)
+{
+   spx_word32_t res;
+   *seed = 1664525 * *seed + 1013904223;
+   res = MULT16_16(EXTRACT16(SHR32(*seed,16)),std);
+   return PSHR32(SUB32(res, SHR(res, 3)),14);
+}
+#else
+spx_word16_t speex_rand(spx_word16_t std, spx_int32_t *seed)
+{
+   const unsigned int jflone = 0x3f800000;
+   const unsigned int jflmsk = 0x007fffff;
+   union {int i; float f;} ran;
+   *seed = 1664525 * *seed + 1013904223;
+   ran.i = jflone | (jflmsk & *seed);
+   ran.f -= 1.5;
+   return 3.4642*std*ran.f;
+}
+#endif
+
+#ifndef OVERRIDE_SPEEX_PUTC
+void _speex_putc(int ch, void *file)
+{
+   FILE *f = (FILE *)file;
+   fprintf(f, "%c", ch);
+}
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/misc.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/misc.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,122 @@
+/* Copyright (C) 2002 Jean-Marc Valin */
+/**
+   @file misc.h
+   @brief Various compatibility routines for Speex
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef MISC_H
+#define MISC_H
+
+#ifndef SPEEX_VERSION
+#define SPEEX_MAJOR_VERSION 1         /**< Major Speex version. */
+#define SPEEX_MINOR_VERSION 1         /**< Minor Speex version. */
+#define SPEEX_MICRO_VERSION 13        /**< Micro Speex version. */
+#define SPEEX_EXTRA_VERSION ""        /**< Extra Speex version. */
+#define SPEEX_VERSION "speex-1.2beta1"  /**< Speex version string. */
+#endif
+
+/* A couple test to catch stupid option combinations */
+#ifdef FIXED_POINT
+
+#ifdef _USE_SSE
+#error SSE is only for floating-point
+#endif
+#if ((defined (ARM4_ASM)||defined (ARM4_ASM)) && defined(BFIN_ASM)) || (defined (ARM4_ASM)&&defined(ARM5E_ASM))
+#error Make up your mind. What CPU do you have?
+#endif
+#ifdef VORBIS_PSYCHO
+#error Vorbis-psy model currently not implemented in fixed-point
+#endif
+
+#else
+
+#if defined (ARM4_ASM) || defined(ARM5E_ASM) || defined(BFIN_ASM)
+#error I suppose you can have a [ARM4/ARM5E/Blackfin] that has float instructions?
+#endif
+#ifdef FIXED_POINT_DEBUG
+#error "Don't you think enabling fixed-point is a good thing to do if you want to debug that?"
+#endif
+
+
+#endif
+
+#include "arch.h"
+
+#ifndef RELEASE
+/** Print a named vector to stdout */
+void print_vec(float *vec, int len, char *name);
+#endif
+
+/** Convert big endian */
+spx_uint32_t be_int(spx_uint32_t i);
+/** Convert little endian */
+spx_uint32_t le_int(spx_uint32_t i);
+
+/** Speex wrapper for calloc. To do your own dynamic allocation, all you need to do is replace this function, speex_realloc and speex_free */
+void *speex_alloc (int size);
+
+/** Same as speex_alloc, except that the area is only needed inside a Speex call (might cause problem with wideband though) */
+void *speex_alloc_scratch (int size);
+
+/** Speex wrapper for realloc. To do your own dynamic allocation, all you need to do is replace this function, speex_alloc and speex_free */
+void *speex_realloc (void *ptr, int size);
+
+/** Speex wrapper for calloc. To do your own dynamic allocation, all you need to do is replace this function, speex_realloc and speex_alloc */
+void speex_free (void *ptr);
+
+/** Same as speex_alloc, except that the area is only needed inside a Speex call (might cause problem with wideband though) */
+void speex_free_scratch (void *ptr);
+
+/** Speex wrapper for mem_move */
+void *speex_move (void *dest, void *src, int n);
+
+/** Speex wrapper for memcpy */
+void speex_memcpy_bytes(char *dst, char *src, int nbytes);
+
+/** Speex wrapper for memset */
+void speex_memset_bytes(char *dst, char src, int nbytes);
+
+/** Print error message to stderr */
+void speex_error(const char *str);
+
+/** Print warning message to stderr */
+void speex_warning(const char *str);
+
+/** Print warning message with integer argument to stderr */
+void speex_warning_int(const char *str, int val);
+
+/** Generate a random number */
+spx_word16_t speex_rand(spx_word16_t std, spx_int32_t *seed);
+
+/** Speex wrapper for putc */
+void _speex_putc(int ch, void *file);
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/misc_bfin.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/misc_bfin.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,54 @@
+/* Copyright (C) 2005 Analog Devices */
+/**
+   @file misc_bfin.h
+   @author Jean-Marc Valin 
+   @brief Various compatibility routines for Speex (Blackfin version)
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#define OVERRIDE_SPEEX_MOVE
+void *speex_move (void *dest, void *src, int n)
+{
+   __asm__ __volatile__
+         (
+         "L0 = 0;\n\t"
+         "I0 = %0;\n\t"
+         "R0 = [I0++];\n\t"
+         "LOOP move%= LC0 = %2;\n\t"
+         "LOOP_BEGIN move%=;\n\t"
+            "[%1++] = R0 || R0 = [I0++];\n\t"
+         "LOOP_END move%=;\n\t"
+         "[%1++] = R0;\n\t"
+   : "=a" (src), "=a" (dest)
+   : "a" ((n>>2)-1), "0" (src), "1" (dest)
+   : "R0", "I0", "L0", "memory"
+         );
+   return dest;
+}

Added: freeswitch/trunk/libs/speex/libspeex/modes.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/modes.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,673 @@
+/* Copyright (C) 2002-2006 Jean-Marc Valin 
+   File: modes.c
+
+   Describes the different modes of the codec
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "modes.h"
+#include "ltp.h"
+#include "quant_lsp.h"
+#include "cb_search.h"
+#include "sb_celp.h"
+#include "nb_celp.h"
+#include "vbr.h"
+#include "misc.h"
+#include <math.h>
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+#define MAX_IN_SAMPLES 640
+
+const SpeexMode * const speex_mode_list[SPEEX_NB_MODES] = {&speex_nb_mode, &speex_wb_mode, &speex_uwb_mode};
+
+/* Extern declarations for all codebooks we use here */
+extern const signed char gain_cdbk_nb[];
+extern const signed char gain_cdbk_lbr[];
+extern const signed char hexc_table[];
+extern const signed char exc_5_256_table[];
+extern const signed char exc_5_64_table[];
+extern const signed char exc_8_128_table[];
+extern const signed char exc_10_32_table[];
+extern const signed char exc_10_16_table[];
+extern const signed char exc_20_32_table[];
+extern const signed char hexc_10_32_table[];
+
+
+/* Parameters for Long-Term Prediction (LTP)*/
+static const ltp_params ltp_params_nb = {
+   gain_cdbk_nb,
+   7,
+   7
+};
+
+/* Parameters for Long-Term Prediction (LTP)*/
+static const ltp_params ltp_params_vlbr = {
+   gain_cdbk_lbr,
+   5,
+   0
+};
+
+/* Parameters for Long-Term Prediction (LTP)*/
+static const ltp_params ltp_params_lbr = {
+   gain_cdbk_lbr,
+   5,
+   7
+};
+
+/* Parameters for Long-Term Prediction (LTP)*/
+static const ltp_params ltp_params_med = {
+   gain_cdbk_lbr,
+   5,
+   7
+};
+
+/* Split-VQ innovation parameters for very low bit-rate narrowband */
+static const split_cb_params split_cb_nb_vlbr = {
+   10,               /*subvect_size*/
+   4,               /*nb_subvect*/
+   exc_10_16_table, /*shape_cb*/
+   4,               /*shape_bits*/
+   0,
+};
+
+/* Split-VQ innovation parameters for very low bit-rate narrowband */
+static const split_cb_params split_cb_nb_ulbr = {
+   20,               /*subvect_size*/
+   2,               /*nb_subvect*/
+   exc_20_32_table, /*shape_cb*/
+   5,               /*shape_bits*/
+   0,
+};
+
+/* Split-VQ innovation parameters for low bit-rate narrowband */
+static const split_cb_params split_cb_nb_lbr = {
+   10,              /*subvect_size*/
+   4,               /*nb_subvect*/
+   exc_10_32_table, /*shape_cb*/
+   5,               /*shape_bits*/
+   0,
+};
+
+
+/* Split-VQ innovation parameters narrowband */
+static const split_cb_params split_cb_nb = {
+   5,               /*subvect_size*/
+   8,               /*nb_subvect*/
+   exc_5_64_table, /*shape_cb*/
+   6,               /*shape_bits*/
+   0,
+};
+
+/* Split-VQ innovation parameters narrowband */
+static const split_cb_params split_cb_nb_med = {
+   8,               /*subvect_size*/
+   5,               /*nb_subvect*/
+   exc_8_128_table, /*shape_cb*/
+   7,               /*shape_bits*/
+   0,
+};
+
+/* Split-VQ innovation for low-band wideband */
+static const split_cb_params split_cb_sb = {
+   5,               /*subvect_size*/
+   8,              /*nb_subvect*/
+   exc_5_256_table,    /*shape_cb*/
+   8,               /*shape_bits*/
+   0,
+};
+
+#ifndef DISABLE_WIDEBAND
+
+/* Split-VQ innovation for high-band wideband */
+static const split_cb_params split_cb_high = {
+   8,               /*subvect_size*/
+   5,               /*nb_subvect*/
+   hexc_table,       /*shape_cb*/
+   7,               /*shape_bits*/
+   1,
+};
+
+
+/* Split-VQ innovation for high-band wideband */
+static const split_cb_params split_cb_high_lbr = {
+   10,               /*subvect_size*/
+   4,               /*nb_subvect*/
+   hexc_10_32_table,       /*shape_cb*/
+   5,               /*shape_bits*/
+   0,
+};
+
+#endif
+
+/* 2150 bps "vocoder-like" mode for comfort noise */
+static const SpeexSubmode nb_submode1 = {
+   0,
+   1,
+   0,
+   0,
+   /* LSP quantization */
+   lsp_quant_lbr,
+   lsp_unquant_lbr,
+   /* No pitch quantization */
+   forced_pitch_quant,
+   forced_pitch_unquant,
+   NULL,
+   /* No innovation quantization (noise only) */
+   noise_codebook_quant,
+   noise_codebook_unquant,
+   NULL,
+   -1,
+   43
+};
+
+/* 3.95 kbps very low bit-rate mode */
+static const SpeexSubmode nb_submode8 = {
+   0,
+   1,
+   0,
+   0,
+   /*LSP quantization*/
+   lsp_quant_lbr,
+   lsp_unquant_lbr,
+   /*No pitch quantization*/
+   forced_pitch_quant,
+   forced_pitch_unquant,
+   NULL,
+   /*Innovation quantization*/
+   split_cb_search_shape_sign,
+   split_cb_shape_sign_unquant,
+   &split_cb_nb_ulbr,
+   QCONST16(.5,15),
+   79
+};
+
+/* 5.95 kbps very low bit-rate mode */
+static const SpeexSubmode nb_submode2 = {
+   0,
+   0,
+   0,
+   0,
+   /*LSP quantization*/
+   lsp_quant_lbr,
+   lsp_unquant_lbr,
+   /*No pitch quantization*/
+   pitch_search_3tap,
+   pitch_unquant_3tap,
+   &ltp_params_vlbr,
+   /*Innovation quantization*/
+   split_cb_search_shape_sign,
+   split_cb_shape_sign_unquant,
+   &split_cb_nb_vlbr,
+   QCONST16(.6,15),
+   119
+};
+
+/* 8 kbps low bit-rate mode */
+static const SpeexSubmode nb_submode3 = {
+   -1,
+   0,
+   1,
+   0,
+   /*LSP quantization*/
+   lsp_quant_lbr,
+   lsp_unquant_lbr,
+   /*Pitch quantization*/
+   pitch_search_3tap,
+   pitch_unquant_3tap,
+   &ltp_params_lbr,
+   /*Innovation quantization*/
+   split_cb_search_shape_sign,
+   split_cb_shape_sign_unquant,
+   &split_cb_nb_lbr,
+   QCONST16(.55,15),
+   160
+};
+
+/* 11 kbps medium bit-rate mode */
+static const SpeexSubmode nb_submode4 = {
+   -1,
+   0,
+   1,
+   0,
+   /*LSP quantization*/
+   lsp_quant_lbr,
+   lsp_unquant_lbr,
+   /*Pitch quantization*/
+   pitch_search_3tap,
+   pitch_unquant_3tap,
+   &ltp_params_med,
+   /*Innovation quantization*/
+   split_cb_search_shape_sign,
+   split_cb_shape_sign_unquant,
+   &split_cb_nb_med,
+   QCONST16(.45,15),
+   220
+};
+
+/* 15 kbps high bit-rate mode */
+static const SpeexSubmode nb_submode5 = {
+   -1,
+   0,
+   3,
+   0,
+   /*LSP quantization*/
+   lsp_quant_nb,
+   lsp_unquant_nb,
+   /*Pitch quantization*/
+   pitch_search_3tap,
+   pitch_unquant_3tap,
+   &ltp_params_nb,
+   /*Innovation quantization*/
+   split_cb_search_shape_sign,
+   split_cb_shape_sign_unquant,
+   &split_cb_nb,
+   QCONST16(.3,15),
+   300
+};
+
+/* 18.2 high bit-rate mode */
+static const SpeexSubmode nb_submode6 = {
+   -1,
+   0,
+   3,
+   0,
+   /*LSP quantization*/
+   lsp_quant_nb,
+   lsp_unquant_nb,
+   /*Pitch quantization*/
+   pitch_search_3tap,
+   pitch_unquant_3tap,
+   &ltp_params_nb,
+   /*Innovation quantization*/
+   split_cb_search_shape_sign,
+   split_cb_shape_sign_unquant,
+   &split_cb_sb,
+   QCONST16(.2,15),
+   364
+};
+
+/* 24.6 kbps high bit-rate mode */
+static const SpeexSubmode nb_submode7 = {
+   -1,
+   0,
+   3,
+   1,
+   /*LSP quantization*/
+   lsp_quant_nb,
+   lsp_unquant_nb,
+   /*Pitch quantization*/
+   pitch_search_3tap,
+   pitch_unquant_3tap,
+   &ltp_params_nb,
+   /*Innovation quantization*/
+   split_cb_search_shape_sign,
+   split_cb_shape_sign_unquant,
+   &split_cb_nb,
+   QCONST16(.1,15),
+   492
+};
+
+
+/* Default mode for narrowband */
+static const SpeexNBMode nb_mode = {
+   160,    /*frameSize*/
+   40,     /*subframeSize*/
+   10,     /*lpcSize*/
+   17,     /*pitchStart*/
+   144,    /*pitchEnd*/
+#ifdef FIXED_POINT
+   29491, 19661, /* gamma1, gamma2 */
+#else
+   0.9, 0.6, /* gamma1, gamma2 */
+#endif
+   .012,   /*lag_factor*/
+   QCONST16(.0002,15), /*lpc_floor*/
+#ifdef EPIC_48K
+   0,
+#endif
+   {NULL, &nb_submode1, &nb_submode2, &nb_submode3, &nb_submode4, &nb_submode5, &nb_submode6, &nb_submode7,
+   &nb_submode8, NULL, NULL, NULL, NULL, NULL, NULL, NULL},
+   5,
+   {1, 8, 2, 3, 3, 4, 4, 5, 5, 6, 7}
+};
+
+
+/* Default mode for narrowband */
+const SpeexMode speex_nb_mode = {
+   &nb_mode,
+   nb_mode_query,
+   "narrowband",
+   0,
+   4,
+   &nb_encoder_init,
+   &nb_encoder_destroy,
+   &nb_encode,
+   &nb_decoder_init,
+   &nb_decoder_destroy,
+   &nb_decode,
+   &nb_encoder_ctl,
+   &nb_decoder_ctl,
+};
+
+
+/* Wideband part */
+
+static const SpeexSubmode wb_submode1 = {
+   0,
+   0,
+   1,
+   0,
+   /*LSP quantization*/
+   lsp_quant_high,
+   lsp_unquant_high,
+   /*Pitch quantization*/
+   NULL,
+   NULL,
+   NULL,
+   /*No innovation quantization*/
+   NULL,
+   NULL,
+   NULL,
+   -1,
+   36
+};
+
+
+static const SpeexSubmode wb_submode2 = {
+   0,
+   0,
+   1,
+   0,
+   /*LSP quantization*/
+   lsp_quant_high,
+   lsp_unquant_high,
+   /*Pitch quantization*/
+   NULL,
+   NULL,
+   NULL,
+   /*Innovation quantization*/
+   split_cb_search_shape_sign,
+   split_cb_shape_sign_unquant,
+#ifdef DISABLE_WIDEBAND
+   NULL,
+#else
+   &split_cb_high_lbr,
+#endif
+   -1,
+   112
+};
+
+
+static const SpeexSubmode wb_submode3 = {
+   0,
+   0,
+   1,
+   0,
+   /*LSP quantization*/
+   lsp_quant_high,
+   lsp_unquant_high,
+   /*Pitch quantization*/
+   NULL,
+   NULL,
+   NULL,
+   /*Innovation quantization*/
+   split_cb_search_shape_sign,
+   split_cb_shape_sign_unquant,
+#ifdef DISABLE_WIDEBAND
+   NULL,
+#else
+   &split_cb_high,
+#endif
+   -1,
+   192
+};
+
+static const SpeexSubmode wb_submode4 = {
+   0,
+   0,
+   1,
+   1,
+   /*LSP quantization*/
+   lsp_quant_high,
+   lsp_unquant_high,
+   /*Pitch quantization*/
+   NULL,
+   NULL,
+   NULL,
+   /*Innovation quantization*/
+   split_cb_search_shape_sign,
+   split_cb_shape_sign_unquant,
+#ifdef DISABLE_WIDEBAND
+   NULL,
+#else
+   &split_cb_high,
+#endif
+   -1,
+   352
+};
+
+
+/* Split-band wideband CELP mode*/
+static const SpeexSBMode sb_wb_mode = {
+   &speex_nb_mode,
+   160,    /*frameSize*/
+   40,     /*subframeSize*/
+   8,     /*lpcSize*/
+   640,    /*bufSize*/
+#ifdef FIXED_POINT
+   29491, 19661, /* gamma1, gamma2 */
+#else
+   0.9, 0.6, /* gamma1, gamma2 */
+#endif
+   .012,   /*lag_factor*/
+   QCONST16(.0002,15), /*lpc_floor*/
+   0.9,
+   {NULL, &wb_submode1, &wb_submode2, &wb_submode3, &wb_submode4, NULL, NULL, NULL},
+   3,
+   {1, 8, 2, 3, 4, 5, 5, 6, 6, 7, 7},
+   {1, 1, 1, 1, 1, 1, 2, 2, 3, 3, 4},
+   vbr_hb_thresh,
+   5
+};
+
+
+const SpeexMode speex_wb_mode = {
+   &sb_wb_mode,
+   wb_mode_query,
+   "wideband (sub-band CELP)",
+   1,
+   4,
+   &sb_encoder_init,
+   &sb_encoder_destroy,
+   &sb_encode,
+   &sb_decoder_init,
+   &sb_decoder_destroy,
+   &sb_decode,
+   &sb_encoder_ctl,
+   &sb_decoder_ctl,
+};
+
+
+
+/* "Ultra-wideband" mode stuff */
+
+
+
+/* Split-band "ultra-wideband" (32 kbps) CELP mode*/
+static const SpeexSBMode sb_uwb_mode = {
+   &speex_wb_mode,
+   320,    /*frameSize*/
+   80,     /*subframeSize*/
+   8,     /*lpcSize*/
+   1280,    /*bufSize*/
+#ifdef FIXED_POINT
+   29491, 19661, /* gamma1, gamma2 */
+#else
+   0.9, 0.6, /* gamma1, gamma2 */
+#endif
+   .012,   /*lag_factor*/
+   QCONST16(.0002,15), /*lpc_floor*/
+   0.7,
+   {NULL, &wb_submode1, NULL, NULL, NULL, NULL, NULL, NULL},
+   1,
+   {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10},
+   {0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1},
+   vbr_uhb_thresh,
+   2
+};
+
+
+const SpeexMode speex_uwb_mode = {
+   &sb_uwb_mode,
+   wb_mode_query,
+   "ultra-wideband (sub-band CELP)",
+   2,
+   4,
+   &sb_encoder_init,
+   &sb_encoder_destroy,
+   &sb_encode,
+   &sb_decoder_init,
+   &sb_decoder_destroy,
+   &sb_decode,
+   &sb_encoder_ctl,
+   &sb_decoder_ctl,
+};
+
+
+
+
+#ifdef EPIC_48K
+
+extern const signed char gain_cdbk_ulbr[];
+extern const signed char exc_12_32_table[];
+
+/* Parameters for Long-Term Prediction (LTP)*/
+static const ltp_params ltp_params_48k = {
+   gain_cdbk_ulbr,
+   3,
+   0
+};
+
+static const split_cb_params split_cb_nb_48k = {
+   12,               /*subvect_size*/
+   4,               /*nb_subvect*/
+   exc_12_32_table, /*shape_cb*/
+   5,               /*shape_bits*/
+   0,
+};
+
+
+/* 4.8 kbps very low bit-rate mode */
+static const SpeexSubmode nb_48k_submode = {
+   0,
+   0,
+   0,
+   0,
+   /*LSP quantization*/
+   lsp_quant_48k,
+   lsp_unquant_48k,
+   /*No pitch quantization*/
+   pitch_search_3tap,
+   pitch_unquant_3tap,
+   &ltp_params_48k,
+   /*Innovation quantization*/
+   split_cb_search_shape_sign,
+   split_cb_shape_sign_unquant,
+   &split_cb_nb_48k,
+#ifdef FIXED_POINT
+   22938, 16384, 11796, 18022,
+#else
+   0.7, 0.5, .36, .55,
+#endif
+   144
+};
+
+
+/* Special, non-standard 4.8 kbps mode */
+static const SpeexNBMode nb_48k_mode = {
+   240,    /*frameSize*/
+   48,     /*subframeSize*/
+   10,     /*lpcSize*/
+   640,    /*bufSize*/
+   17,     /*pitchStart*/
+   144,    /*pitchEnd*/
+   0.9,    /*gamma1*/
+   0.6,    /*gamma2*/
+   .01,   /*lag_factor*/
+   QCONST16(.0003,15), /*lpc_floor*/
+   1,
+   {NULL, NULL, &nb_48k_submode, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL},
+   2,
+   {2,2,2,2,2,2,2,2,2,2,2}
+};
+
+
+/* Default mode for narrowband */
+const SpeexMode speex_nb_48k_mode = {
+   &nb_48k_mode,
+   nb_mode_query,
+   "narrowband 4.8 kbps",
+   1000,
+   4,
+   &nb_encoder_init,
+   &nb_encoder_destroy,
+   &nb_encode,
+   &nb_decoder_init,
+   &nb_decoder_destroy,
+   &nb_decode,
+   &nb_encoder_ctl,
+   &nb_decoder_ctl,
+};
+
+
+#endif
+
+int speex_mode_query(const SpeexMode *mode, int request, void *ptr)
+{
+   return mode->query(mode->mode, request, ptr);
+}
+
+const SpeexMode * speex_lib_get_mode (int mode)
+{
+#ifdef EPIC_48K
+  if (mode == SPEEX_MODEID_NB_48K) return &speex_nb_48k_mode;
+#endif
+
+  if (mode < 0 || mode > SPEEX_NB_MODES) return NULL;
+
+  return speex_mode_list[mode];
+}

Added: freeswitch/trunk/libs/speex/libspeex/modes.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/modes.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,149 @@
+/* Copyright (C) 2002-2006 Jean-Marc Valin */
+/**
+   @file modes.h
+   @brief Describes the different modes of the codec
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifndef MODES_H
+#define MODES_H
+
+#include <speex/speex.h>
+#include <speex/speex_bits.h>
+#include "misc.h"
+
+#define NB_SUBMODES 16
+#define NB_SUBMODE_BITS 4
+
+#define SB_SUBMODES 8
+#define SB_SUBMODE_BITS 3
+
+
+/** Quantizes LSPs */
+typedef void (*lsp_quant_func)(spx_lsp_t *, spx_lsp_t *, int, SpeexBits *);
+
+/** Decodes quantized LSPs */
+typedef void (*lsp_unquant_func)(spx_lsp_t *, int, SpeexBits *);
+
+
+/** Long-term predictor quantization */
+typedef int (*ltp_quant_func)(spx_word16_t *, spx_word16_t *, spx_coef_t *, spx_coef_t *, 
+                              spx_coef_t *, spx_sig_t *, const void *, int, int, spx_word16_t, 
+                              int, int, SpeexBits*, char *, spx_word16_t *, spx_word16_t *, int, int, int, spx_word32_t *);
+
+/** Long-term un-quantize */
+typedef void (*ltp_unquant_func)(spx_word16_t *, spx_word32_t *, int, int, spx_word16_t, const void *, int, int *,
+                                 spx_word16_t *, SpeexBits*, char*, int, int, spx_word16_t, int);
+
+
+/** Innovation quantization function */
+typedef void (*innovation_quant_func)(spx_word16_t *, spx_coef_t *, spx_coef_t *, spx_coef_t *, const void *, int, int, 
+                                      spx_sig_t *, spx_word16_t *, SpeexBits *, char *, int, int);
+
+/** Innovation unquantization function */
+typedef void (*innovation_unquant_func)(spx_sig_t *, const void *, int, SpeexBits*, char *, spx_int32_t *);
+
+/** Description of a Speex sub-mode (wither narrowband or wideband */
+typedef struct SpeexSubmode {
+   int     lbr_pitch;          /**< Set to -1 for "normal" modes, otherwise encode pitch using a global pitch and allowing a +- lbr_pitch variation (for low not-rates)*/
+   int     forced_pitch_gain;  /**< Use the same (forced) pitch gain for all sub-frames */
+   int     have_subframe_gain; /**< Number of bits to use as sub-frame innovation gain */
+   int     double_codebook;    /**< Apply innovation quantization twice for higher quality (and higher bit-rate)*/
+   /*LSP functions*/
+   lsp_quant_func    lsp_quant; /**< LSP quantization function */
+   lsp_unquant_func  lsp_unquant; /**< LSP unquantization function */
+
+   /*Lont-term predictor functions*/
+   ltp_quant_func    ltp_quant; /**< Long-term predictor (pitch) quantizer */
+   ltp_unquant_func  ltp_unquant; /**< Long-term predictor (pitch) un-quantizer */
+   const void       *ltp_params; /**< Pitch parameters (options) */
+
+   /*Quantization of innovation*/
+   innovation_quant_func innovation_quant; /**< Innovation quantization */
+   innovation_unquant_func innovation_unquant; /**< Innovation un-quantization */
+   const void             *innovation_params; /**< Innovation quantization parameters*/
+
+   spx_word16_t      comb_gain;  /**< Gain of enhancer comb filter */
+
+   int               bits_per_frame; /**< Number of bits per frame after encoding*/
+} SpeexSubmode;
+
+/** Struct defining the encoding/decoding mode*/
+typedef struct SpeexNBMode {
+   int     frameSize;      /**< Size of frames used for encoding */
+   int     subframeSize;   /**< Size of sub-frames used for encoding */
+   int     lpcSize;        /**< Order of LPC filter */
+   int     pitchStart;     /**< Smallest pitch value allowed */
+   int     pitchEnd;       /**< Largest pitch value allowed */
+
+   spx_word16_t gamma1;    /**< Perceptual filter parameter #1 */
+   spx_word16_t gamma2;    /**< Perceptual filter parameter #2 */
+   float   lag_factor;     /**< Lag-windowing parameter */
+   spx_word16_t   lpc_floor;      /**< Noise floor for LPC analysis */
+
+#ifdef EPIC_48K
+   int     lbr48k;         /**< 1 for the special 4.8 kbps mode */
+#endif
+
+   const SpeexSubmode *submodes[NB_SUBMODES]; /**< Sub-mode data for the mode */
+   int     defaultSubmode; /**< Default sub-mode to use when encoding */
+   int     quality_map[11]; /**< Mode corresponding to each quality setting */
+} SpeexNBMode;
+
+
+/** Struct defining the encoding/decoding mode for SB-CELP (wideband) */
+typedef struct SpeexSBMode {
+   const SpeexMode *nb_mode;    /**< Embedded narrowband mode */
+   int     frameSize;     /**< Size of frames used for encoding */
+   int     subframeSize;  /**< Size of sub-frames used for encoding */
+   int     lpcSize;       /**< Order of LPC filter */
+   int     bufSize;       /**< Signal buffer size in encoder */
+   spx_word16_t gamma1;   /**< Perceptual filter parameter #1 */
+   spx_word16_t gamma2;   /**< Perceptual filter parameter #1 */
+   float   lag_factor;    /**< Lag-windowing parameter */
+   spx_word16_t   lpc_floor;     /**< Noise floor for LPC analysis */
+   float   folding_gain;
+
+   const SpeexSubmode *submodes[SB_SUBMODES]; /**< Sub-mode data for the mode */
+   int     defaultSubmode; /**< Default sub-mode to use when encoding */
+   int     low_quality_map[11]; /**< Mode corresponding to each quality setting */
+   int     quality_map[11]; /**< Mode corresponding to each quality setting */
+   const float (*vbr_thresh)[11];
+   int     nb_modes;
+} SpeexSBMode;
+
+int speex_encode_native(void *state, spx_word16_t *in, SpeexBits *bits);
+int speex_decode_native(void *state, SpeexBits *bits, spx_word16_t *out);
+
+int nb_mode_query(const void *mode, int request, void *ptr);
+int wb_mode_query(const void *mode, int request, void *ptr);
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/nb_celp.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/nb_celp.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,2055 @@
+/* Copyright (C) 2002-2006 Jean-Marc Valin 
+   File: nb_celp.c
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <math.h>
+#include "nb_celp.h"
+#include "lpc.h"
+#include "lsp.h"
+#include "ltp.h"
+#include "quant_lsp.h"
+#include "cb_search.h"
+#include "filters.h"
+#include "stack_alloc.h"
+#include "vq.h"
+#include <speex/speex_bits.h>
+#include "vbr.h"
+#include "misc.h"
+#include "math_approx.h"
+#include <speex/speex_callbacks.h>
+
+#ifdef VORBIS_PSYCHO
+#include "vorbis_psy.h"
+#endif
+
+#ifndef M_PI
+#define M_PI           3.14159265358979323846  /* pi */
+#endif
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+#define SUBMODE(x) st->submodes[st->submodeID]->x
+
+/* Default size for the encoder and decoder stack (can be changed at compile time).
+   This does not apply when using variable-size arrays or alloca. */
+#ifndef NB_ENC_STACK
+#define NB_ENC_STACK (8000*sizeof(spx_sig_t))
+#endif
+
+#ifndef NB_DEC_STACK
+#define NB_DEC_STACK (4000*sizeof(spx_sig_t))
+#endif
+
+
+#ifdef FIXED_POINT
+const spx_word32_t ol_gain_table[32]={18900, 25150, 33468, 44536, 59265, 78865, 104946, 139653, 185838, 247297, 329081, 437913, 582736, 775454, 1031906, 1373169, 1827293, 2431601, 3235761, 4305867, 5729870, 7624808, 10146425, 13501971, 17967238, 23909222, 31816294, 42338330, 56340132, 74972501, 99766822, 132760927};
+const spx_word16_t exc_gain_quant_scal3_bound[7]={1841, 3883, 6051, 8062, 10444, 13580, 18560};
+const spx_word16_t exc_gain_quant_scal3[8]={1002, 2680, 5086, 7016, 9108, 11781, 15380, 21740};
+const spx_word16_t exc_gain_quant_scal1_bound[1]={14385};
+const spx_word16_t exc_gain_quant_scal1[2]={11546, 17224};
+
+#define LSP_MARGIN 16
+#define LSP_DELTA1 6553
+#define LSP_DELTA2 1638
+
+#else
+
+const float exc_gain_quant_scal3_bound[7]={0.112338, 0.236980, 0.369316, 0.492054, 0.637471, 0.828874, 1.132784};
+const float exc_gain_quant_scal3[8]={0.061130, 0.163546, 0.310413, 0.428220, 0.555887, 0.719055, 0.938694, 1.326874};
+const float exc_gain_quant_scal1_bound[1]={0.87798};
+const float exc_gain_quant_scal1[2]={0.70469, 1.05127};
+
+#define LSP_MARGIN .002
+#define LSP_DELTA1 .2
+#define LSP_DELTA2 .05
+
+#endif
+
+#ifdef VORBIS_PSYCHO
+#define EXTRA_BUFFER 100
+#else
+#define EXTRA_BUFFER 0
+#endif
+
+
+#define sqr(x) ((x)*(x))
+
+extern const spx_word16_t lpc_window[];
+
+void *nb_encoder_init(const SpeexMode *m)
+{
+   EncState *st;
+   const SpeexNBMode *mode;
+   int i;
+
+   mode=(const SpeexNBMode *)m->mode;
+   st = (EncState*)speex_alloc(sizeof(EncState));
+   if (!st)
+      return NULL;
+#if defined(VAR_ARRAYS) || defined (USE_ALLOCA)
+   st->stack = NULL;
+#else
+   st->stack = (char*)speex_alloc_scratch(NB_ENC_STACK);
+#endif
+   
+   st->mode=m;
+
+   st->frameSize = mode->frameSize;
+   st->nbSubframes=mode->frameSize/mode->subframeSize;
+   st->subframeSize=mode->subframeSize;
+   st->windowSize = st->frameSize+st->subframeSize;
+   st->lpcSize = mode->lpcSize;
+   st->gamma1=mode->gamma1;
+   st->gamma2=mode->gamma2;
+   st->min_pitch=mode->pitchStart;
+   st->max_pitch=mode->pitchEnd;
+   st->lag_factor=mode->lag_factor;
+   st->lpc_floor = mode->lpc_floor;
+  
+   st->submodes=mode->submodes;
+   st->submodeID=st->submodeSelect=mode->defaultSubmode;
+   st->bounded_pitch = 1;
+
+   st->encode_submode = 1;
+#ifdef EPIC_48K
+   st->lbr_48k=mode->lbr48k;
+#endif
+
+#ifdef VORBIS_PSYCHO
+   st->psy = vorbis_psy_init(8000, 256);
+   st->curve = (float*)speex_alloc(128*sizeof(float));
+   st->old_curve = (float*)speex_alloc(128*sizeof(float));
+   st->psy_window = (float*)speex_alloc(256*sizeof(float));
+#endif
+
+   st->cumul_gain = 1024;
+
+   /* Allocating input buffer */
+   st->winBuf = (spx_word16_t*)speex_alloc((st->windowSize-st->frameSize)*sizeof(spx_word16_t));
+   /* Allocating excitation buffer */
+   st->excBuf = (spx_word16_t*)speex_alloc((mode->frameSize+mode->pitchEnd+2)*sizeof(spx_word16_t));
+   st->exc = st->excBuf + mode->pitchEnd + 2;
+   st->swBuf = (spx_word16_t*)speex_alloc((mode->frameSize+mode->pitchEnd+2)*sizeof(spx_word16_t));
+   st->sw = st->swBuf + mode->pitchEnd + 2;
+
+   st->window= lpc_window;
+   
+   /* Create the window for autocorrelation (lag-windowing) */
+   st->lagWindow = (spx_word16_t*)speex_alloc((st->lpcSize+1)*sizeof(spx_word16_t));
+   for (i=0;i<st->lpcSize+1;i++)
+      st->lagWindow[i]=16384*exp(-.5*sqr(2*M_PI*st->lag_factor*i));
+
+   st->old_lsp = (spx_lsp_t*)speex_alloc((st->lpcSize)*sizeof(spx_lsp_t));
+   st->old_qlsp = (spx_lsp_t*)speex_alloc((st->lpcSize)*sizeof(spx_lsp_t));
+   st->first = 1;
+   for (i=0;i<st->lpcSize;i++)
+   {
+      st->old_lsp[i]=LSP_SCALING*(M_PI*((float)(i+1)))/(st->lpcSize+1);
+   }
+
+   st->mem_sp = (spx_mem_t*)speex_alloc((st->lpcSize)*sizeof(spx_mem_t));
+   st->mem_sw = (spx_mem_t*)speex_alloc((st->lpcSize)*sizeof(spx_mem_t));
+   st->mem_sw_whole = (spx_mem_t*)speex_alloc((st->lpcSize)*sizeof(spx_mem_t));
+   st->mem_exc = (spx_mem_t*)speex_alloc((st->lpcSize)*sizeof(spx_mem_t));
+   st->mem_exc2 = (spx_mem_t*)speex_alloc((st->lpcSize)*sizeof(spx_mem_t));
+
+   st->pi_gain = (spx_word32_t*)speex_alloc((st->nbSubframes)*sizeof(spx_word32_t));
+   st->innov_save = NULL;
+   
+   st->pitch = (int*)speex_alloc((st->nbSubframes)*sizeof(int));
+
+   st->vbr = (VBRState*)speex_alloc(sizeof(VBRState));
+   vbr_init(st->vbr);
+   st->vbr_quality = 8;
+   st->vbr_enabled = 0;
+   st->vbr_max = 0;
+   st->vad_enabled = 0;
+   st->dtx_enabled = 0;
+   st->abr_enabled = 0;
+   st->abr_drift = 0;
+
+   st->plc_tuning = 2;
+   st->complexity=2;
+   st->sampling_rate=8000;
+   st->dtx_count=0;
+   st->isWideband = 0;
+   st->highpass_enabled = 1;
+   
+#ifdef ENABLE_VALGRIND
+   VALGRIND_MAKE_READABLE(st, (st->stack-(char*)st));
+#endif
+   return st;
+}
+
+void nb_encoder_destroy(void *state)
+{
+   EncState *st=(EncState *)state;
+   /* Free all allocated memory */
+#if !(defined(VAR_ARRAYS) || defined (USE_ALLOCA))
+   speex_free_scratch(st->stack);
+#endif
+
+   speex_free (st->winBuf);
+   speex_free (st->excBuf);
+   speex_free (st->old_qlsp);
+   speex_free (st->swBuf);
+
+   speex_free (st->lagWindow);
+
+   speex_free (st->old_lsp);
+   speex_free (st->mem_sp);
+   speex_free (st->mem_sw);
+   speex_free (st->mem_sw_whole);
+   speex_free (st->mem_exc);
+   speex_free (st->mem_exc2);
+   speex_free (st->pi_gain);
+   speex_free (st->pitch);
+
+   vbr_destroy(st->vbr);
+   speex_free (st->vbr);
+
+#ifdef VORBIS_PSYCHO
+   vorbis_psy_destroy(st->psy);
+   speex_free (st->curve);
+   speex_free (st->old_curve);
+   speex_free (st->psy_window);
+#endif
+
+   /*Free state memory... should be last*/
+   speex_free(st);
+}
+
+int nb_encode(void *state, void *vin, SpeexBits *bits)
+{
+   EncState *st;
+   int i, sub, roots;
+   int ol_pitch;
+   spx_word16_t ol_pitch_coef;
+   spx_word32_t ol_gain;
+   VARDECL(spx_word16_t *ringing);
+   VARDECL(spx_word16_t *target);
+   VARDECL(spx_sig_t *innov);
+   VARDECL(spx_word32_t *exc32);
+   VARDECL(spx_mem_t *mem);
+   VARDECL(spx_coef_t *bw_lpc1);
+   VARDECL(spx_coef_t *bw_lpc2);
+   VARDECL(spx_coef_t *lpc);
+   VARDECL(spx_lsp_t *lsp);
+   VARDECL(spx_lsp_t *qlsp);
+   VARDECL(spx_lsp_t *interp_lsp);
+   VARDECL(spx_lsp_t *interp_qlsp);
+   VARDECL(spx_coef_t *interp_lpc);
+   VARDECL(spx_coef_t *interp_qlpc);
+   char *stack;
+   VARDECL(spx_word16_t *syn_resp);
+   VARDECL(spx_word16_t *real_exc);
+#ifdef EPIC_48K
+   int pitch_half[2];
+   int ol_pitch_id=0;
+#endif
+   spx_word16_t *in = (spx_word16_t*)vin;
+
+   st=(EncState *)state;
+   stack=st->stack;
+
+   ALLOC(lpc, st->lpcSize, spx_coef_t);
+   ALLOC(bw_lpc1, st->lpcSize, spx_coef_t);
+   ALLOC(bw_lpc2, st->lpcSize, spx_coef_t);
+   ALLOC(lsp, st->lpcSize, spx_lsp_t);
+   ALLOC(qlsp, st->lpcSize, spx_lsp_t);
+   ALLOC(interp_lsp, st->lpcSize, spx_lsp_t);
+   ALLOC(interp_qlsp, st->lpcSize, spx_lsp_t);
+   ALLOC(interp_lpc, st->lpcSize, spx_coef_t);
+   ALLOC(interp_qlpc, st->lpcSize, spx_coef_t);
+
+   /* Move signals 1 frame towards the past */
+   speex_move(st->excBuf, st->excBuf+st->frameSize, (st->max_pitch+2)*sizeof(spx_word16_t));
+   speex_move(st->swBuf, st->swBuf+st->frameSize, (st->max_pitch+2)*sizeof(spx_word16_t));
+
+   if (st->highpass_enabled)
+      highpass(in, in, st->frameSize, (st->isWideband?HIGHPASS_WIDEBAND:HIGHPASS_NARROWBAND)|HIGHPASS_INPUT, st->mem_hp);
+   
+   {
+      VARDECL(spx_word16_t *w_sig);
+      VARDECL(spx_word16_t *autocorr);
+      ALLOC(w_sig, st->windowSize, spx_word16_t);
+      ALLOC(autocorr, st->lpcSize+1, spx_word16_t);
+      /* Window for analysis */
+      for (i=0;i<st->windowSize-st->frameSize;i++)
+         w_sig[i] = EXTRACT16(SHR32(MULT16_16(st->winBuf[i],st->window[i]),SIG_SHIFT));
+      for (;i<st->windowSize;i++)
+         w_sig[i] = EXTRACT16(SHR32(MULT16_16(in[i-st->windowSize+st->frameSize],st->window[i]),SIG_SHIFT));
+      /* Compute auto-correlation */
+      _spx_autocorr(w_sig, autocorr, st->lpcSize+1, st->windowSize);
+      autocorr[0] = ADD16(autocorr[0],MULT16_16_Q15(autocorr[0],st->lpc_floor)); /* Noise floor in auto-correlation domain */
+
+      /* Lag windowing: equivalent to filtering in the power-spectrum domain */
+      for (i=0;i<st->lpcSize+1;i++)
+         autocorr[i] = MULT16_16_Q14(autocorr[i],st->lagWindow[i]);
+
+      /* Levinson-Durbin */
+      _spx_lpc(lpc, autocorr, st->lpcSize);
+      /* LPC to LSPs (x-domain) transform */
+      roots=lpc_to_lsp (lpc, st->lpcSize, lsp, 10, LSP_DELTA1, stack);
+      /* Check if we found all the roots */
+      if (roots!=st->lpcSize)
+      {
+         /*If we can't find all LSP's, do some damage control and use previous filter*/
+         for (i=0;i<st->lpcSize;i++)
+         {
+            lsp[i]=st->old_lsp[i];
+         }
+      }
+   }
+
+
+
+
+   /* Whole frame analysis (open-loop estimation of pitch and excitation gain) */
+   {
+      if (st->first)
+         for (i=0;i<st->lpcSize;i++)
+            interp_lsp[i] = lsp[i];
+      else
+         lsp_interpolate(st->old_lsp, lsp, interp_lsp, st->lpcSize, st->nbSubframes, st->nbSubframes<<1);
+
+      lsp_enforce_margin(interp_lsp, st->lpcSize, LSP_MARGIN);
+
+      /* Compute interpolated LPCs (unquantized) for whole frame*/
+      lsp_to_lpc(interp_lsp, interp_lpc, st->lpcSize,stack);
+
+
+      /*Open-loop pitch*/
+      if (st->complexity>2 || !st->submodes[st->submodeID] || st->vbr_enabled || st->vad_enabled || SUBMODE(forced_pitch_gain) ||
+          SUBMODE(lbr_pitch) != -1)
+      {
+         int nol_pitch[6];
+         spx_word16_t nol_pitch_coef[6];
+         
+         bw_lpc(st->gamma1, interp_lpc, bw_lpc1, st->lpcSize);
+         bw_lpc(st->gamma2, interp_lpc, bw_lpc2, st->lpcSize);
+         
+         for (i=0;i<st->windowSize-st->frameSize;i++)
+            st->sw[i] = st->winBuf[i];
+         for (;i<st->frameSize;i++)
+            st->sw[i] = in[i-st->windowSize+st->frameSize];
+         filter_mem16(st->sw, bw_lpc1, bw_lpc2, st->sw, st->frameSize, st->lpcSize, st->mem_sw_whole, stack);
+
+         open_loop_nbest_pitch(st->sw, st->min_pitch, st->max_pitch, st->frameSize, 
+                               nol_pitch, nol_pitch_coef, 6, stack);
+         ol_pitch=nol_pitch[0];
+         ol_pitch_coef = nol_pitch_coef[0];
+         /*Try to remove pitch multiples*/
+         for (i=1;i<6;i++)
+         {
+#ifdef FIXED_POINT
+            if ((nol_pitch_coef[i]>MULT16_16_Q15(nol_pitch_coef[0],27853)) && 
+#else
+            if ((nol_pitch_coef[i]>.85*nol_pitch_coef[0]) && 
+#endif
+                (ABS(2*nol_pitch[i]-ol_pitch)<=2 || ABS(3*nol_pitch[i]-ol_pitch)<=3 || 
+                 ABS(4*nol_pitch[i]-ol_pitch)<=4 || ABS(5*nol_pitch[i]-ol_pitch)<=5))
+            {
+               /*ol_pitch_coef=nol_pitch_coef[i];*/
+               ol_pitch = nol_pitch[i];
+            }
+         }
+         /*if (ol_pitch>50)
+           ol_pitch/=2;*/
+         /*ol_pitch_coef = sqrt(ol_pitch_coef);*/
+
+#ifdef EPIC_48K
+         if (st->lbr_48k)
+         {
+            if (ol_pitch < st->min_pitch+2)
+               ol_pitch = st->min_pitch+2;
+            if (ol_pitch > st->max_pitch-2)
+               ol_pitch = st->max_pitch-2;
+            open_loop_nbest_pitch(st->sw, ol_pitch-2, ol_pitch+2, st->frameSize>>1, 
+                                  &pitch_half[0], nol_pitch_coef, 1, stack);
+            open_loop_nbest_pitch(st->sw+(st->frameSize>>1), pitch_half[0]-1, pitch_half[0]+2, st->frameSize>>1, 
+                                  &pitch_half[1], nol_pitch_coef, 1, stack);
+         }
+#endif
+      } else {
+         ol_pitch=0;
+         ol_pitch_coef=0;
+      }
+      
+      /*Compute "real" excitation*/
+      for (i=0;i<st->windowSize-st->frameSize;i++)
+         st->exc[i] = st->winBuf[i];
+      for (;i<st->frameSize;i++)
+         st->exc[i] = in[i-st->windowSize+st->frameSize];
+      fir_mem16(st->exc, interp_lpc, st->exc, st->frameSize, st->lpcSize, st->mem_exc, stack);
+
+      /* Compute open-loop excitation gain */
+#ifdef EPIC_48K
+      if (st->lbr_48k)
+      {
+         float ol1=0,ol2=0;
+         float ol_gain2;
+         ol1 = compute_rms16(st->exc, st->frameSize>>1);
+         ol2 = compute_rms16(st->exc+(st->frameSize>>1), st->frameSize>>1);
+         ol1 *= ol1*(st->frameSize>>1);
+         ol2 *= ol2*(st->frameSize>>1);
+
+         ol_gain2=ol1;
+         if (ol2>ol1)
+            ol_gain2=ol2;
+         ol_gain2 = sqrt(2*ol_gain2*(ol1+ol2))*1.3*(1-.5*GAIN_SCALING_1*GAIN_SCALING_1*ol_pitch_coef*ol_pitch_coef);
+      
+         ol_gain=SHR(sqrt(1+ol_gain2/st->frameSize),SIG_SHIFT);
+
+      } else
+#endif
+      {
+         spx_word16_t g = compute_rms16(st->exc, st->frameSize);
+         if (ol_pitch>0)
+            ol_gain = MULT16_16(g, MULT16_16_Q14(QCONST16(1.1,14),
+                                spx_sqrt(QCONST32(1.,28)-MULT16_32_Q15(QCONST16(.8,15),SHL32(MULT16_16(ol_pitch_coef,ol_pitch_coef),16)))));
+         else
+            ol_gain = SHL32(EXTEND32(g),SIG_SHIFT);
+      }
+   }
+
+#ifdef VORBIS_PSYCHO
+   for(i=0;i<256-st->frameSize;i++)
+      st->psy_window[i] = st->psy_window[i+st->frameSize];
+   for(i=0;i<st->frameSize;i++)
+      st->psy_window[256-st->frameSize+i] = in[i];
+   compute_curve(st->psy, st->psy_window, st->curve);
+   /*print_vec(st->curve, 128, "curve");*/
+   if (st->first)
+      for (i=0;i<128;i++)
+         st->old_curve[i] = st->curve[i];
+#endif
+
+   /*VBR stuff*/
+   if (st->vbr && (st->vbr_enabled||st->vad_enabled))
+   {
+      float lsp_dist=0;
+      for (i=0;i<st->lpcSize;i++)
+         lsp_dist += (st->old_lsp[i] - lsp[i])*(st->old_lsp[i] - lsp[i]);
+      lsp_dist /= LSP_SCALING*LSP_SCALING;
+      
+      if (st->abr_enabled)
+      {
+         float qual_change=0;
+         if (st->abr_drift2 * st->abr_drift > 0)
+         {
+            /* Only adapt if long-term and short-term drift are the same sign */
+            qual_change = -.00001*st->abr_drift/(1+st->abr_count);
+            if (qual_change>.05)
+               qual_change=.05;
+            if (qual_change<-.05)
+               qual_change=-.05;
+         }
+         st->vbr_quality += qual_change;
+         if (st->vbr_quality>10)
+            st->vbr_quality=10;
+         if (st->vbr_quality<0)
+            st->vbr_quality=0;
+      }
+
+      st->relative_quality = vbr_analysis(st->vbr, in, st->frameSize, ol_pitch, GAIN_SCALING_1*ol_pitch_coef);
+      /*if (delta_qual<0)*/
+      /*  delta_qual*=.1*(3+st->vbr_quality);*/
+      if (st->vbr_enabled) 
+      {
+         spx_int32_t mode;
+         int choice=0;
+         float min_diff=100;
+         mode = 8;
+         while (mode)
+         {
+            int v1;
+            float thresh;
+            v1=(int)floor(st->vbr_quality);
+            if (v1==10)
+               thresh = vbr_nb_thresh[mode][v1];
+            else
+               thresh = (st->vbr_quality-v1)*vbr_nb_thresh[mode][v1+1] + (1+v1-st->vbr_quality)*vbr_nb_thresh[mode][v1];
+            if (st->relative_quality > thresh && 
+                st->relative_quality-thresh<min_diff)
+            {
+               choice = mode;
+               min_diff = st->relative_quality-thresh;
+            }
+            mode--;
+         }
+         mode=choice;
+         if (mode==0)
+         {
+            if (st->dtx_count==0 || lsp_dist>.05 || !st->dtx_enabled || st->dtx_count>20)
+            {
+               mode=1;
+               st->dtx_count=1;
+            } else {
+               mode=0;
+               st->dtx_count++;
+            }
+         } else {
+            st->dtx_count=0;
+         }
+
+         speex_encoder_ctl(state, SPEEX_SET_MODE, &mode);
+         if (st->vbr_max>0)
+         {
+            spx_int32_t rate;
+            speex_encoder_ctl(state, SPEEX_GET_BITRATE, &rate);
+            if (rate > st->vbr_max)
+            {
+               rate = st->vbr_max;
+               speex_encoder_ctl(state, SPEEX_SET_BITRATE, &rate);
+            }
+         }
+         
+         if (st->abr_enabled)
+         {
+            spx_int32_t bitrate;
+            speex_encoder_ctl(state, SPEEX_GET_BITRATE, &bitrate);
+            st->abr_drift+=(bitrate-st->abr_enabled);
+            st->abr_drift2 = .95*st->abr_drift2 + .05*(bitrate-st->abr_enabled);
+            st->abr_count += 1.0;
+         }
+
+      } else {
+         /*VAD only case*/
+         int mode;
+         if (st->relative_quality<2)
+         {
+            if (st->dtx_count==0 || lsp_dist>.05 || !st->dtx_enabled || st->dtx_count>20)
+            {
+               st->dtx_count=1;
+               mode=1;
+            } else {
+               mode=0;
+               st->dtx_count++;
+            }
+         } else {
+            st->dtx_count = 0;
+            mode=st->submodeSelect;
+         }
+         /*speex_encoder_ctl(state, SPEEX_SET_MODE, &mode);*/
+         st->submodeID=mode;
+      } 
+   } else {
+      st->relative_quality = -1;
+   }
+
+   if (st->encode_submode)
+   {
+#ifdef EPIC_48K
+   if (!st->lbr_48k) {
+#endif
+
+   /* First, transmit a zero for narrowband */
+   speex_bits_pack(bits, 0, 1);
+
+   /* Transmit the sub-mode we use for this frame */
+   speex_bits_pack(bits, st->submodeID, NB_SUBMODE_BITS);
+
+#ifdef EPIC_48K
+   }
+#endif
+   }
+
+   /* If null mode (no transmission), just set a couple things to zero*/
+   if (st->submodes[st->submodeID] == NULL)
+   {
+      for (i=0;i<st->frameSize;i++)
+         st->exc[i]=st->sw[i]=VERY_SMALL;
+
+      for (i=0;i<st->lpcSize;i++)
+         st->mem_sw[i]=0;
+      st->first=1;
+      st->bounded_pitch = 1;
+
+      speex_move(st->winBuf, in+2*st->frameSize-st->windowSize, (st->windowSize-st->frameSize)*sizeof(spx_word16_t));
+
+      /* Clear memory (no need to really compute it) */
+      for (i=0;i<st->lpcSize;i++)
+         st->mem_sp[i] = 0;
+      return 0;
+
+   }
+
+   /* LSP Quantization */
+   if (st->first)
+   {
+      for (i=0;i<st->lpcSize;i++)
+         st->old_lsp[i] = lsp[i];
+   }
+
+
+   /*Quantize LSPs*/
+#if 1 /*0 for unquantized*/
+   SUBMODE(lsp_quant)(lsp, qlsp, st->lpcSize, bits);
+#else
+   for (i=0;i<st->lpcSize;i++)
+     qlsp[i]=lsp[i];
+#endif
+
+#ifdef EPIC_48K
+   if (st->lbr_48k) {
+      speex_bits_pack(bits, pitch_half[0]-st->min_pitch, 7);
+      speex_bits_pack(bits, pitch_half[1]-pitch_half[0]+1, 2);
+      
+      {
+         int quant = (int)floor(.5+7.4*GAIN_SCALING_1*ol_pitch_coef);
+         if (quant>7)
+            quant=7;
+         if (quant<0)
+            quant=0;
+         ol_pitch_id=quant;
+         speex_bits_pack(bits, quant, 3);
+         ol_pitch_coef=GAIN_SCALING*0.13514*quant;
+         
+      }
+      {
+         int qe = (int)(floor(.5+2.1*log(ol_gain*1.0/SIG_SCALING)))-2;
+         if (qe<0)
+            qe=0;
+         if (qe>15)
+            qe=15;
+         ol_gain = exp((qe+2)/2.1)*SIG_SCALING;
+         speex_bits_pack(bits, qe, 4);
+      }
+
+   } else {
+#endif
+
+   /*If we use low bit-rate pitch mode, transmit open-loop pitch*/
+   if (SUBMODE(lbr_pitch)!=-1)
+   {
+      speex_bits_pack(bits, ol_pitch-st->min_pitch, 7);
+   } 
+
+   if (SUBMODE(forced_pitch_gain))
+   {
+      int quant;
+      quant = (int)floor(.5+15*ol_pitch_coef*GAIN_SCALING_1);
+      if (quant>15)
+         quant=15;
+      if (quant<0)
+         quant=0;
+      speex_bits_pack(bits, quant, 4);
+      ol_pitch_coef=GAIN_SCALING*0.066667*quant;
+   }
+   
+   
+   /*Quantize and transmit open-loop excitation gain*/
+#ifdef FIXED_POINT
+   {
+      int qe = scal_quant32(ol_gain, ol_gain_table, 32);
+      /*ol_gain = exp(qe/3.5)*SIG_SCALING;*/
+      ol_gain = MULT16_32_Q15(28406,ol_gain_table[qe]);
+      speex_bits_pack(bits, qe, 5);
+   }
+#else
+   {
+      int qe = (int)(floor(.5+3.5*log(ol_gain*1.0/SIG_SCALING)));
+      if (qe<0)
+         qe=0;
+      if (qe>31)
+         qe=31;
+      ol_gain = exp(qe/3.5)*SIG_SCALING;
+      speex_bits_pack(bits, qe, 5);
+   }
+#endif
+
+
+#ifdef EPIC_48K
+   }
+#endif
+
+
+   /* Special case for first frame */
+   if (st->first)
+   {
+      for (i=0;i<st->lpcSize;i++)
+         st->old_qlsp[i] = qlsp[i];
+   }
+
+   /* Target signal */
+   ALLOC(target, st->subframeSize, spx_word16_t);
+   ALLOC(innov, st->subframeSize, spx_sig_t);
+   ALLOC(exc32, st->subframeSize, spx_word32_t);
+   ALLOC(ringing, st->subframeSize, spx_word16_t);
+   ALLOC(syn_resp, st->subframeSize, spx_word16_t);
+   ALLOC(real_exc, st->subframeSize, spx_word16_t);
+   ALLOC(mem, st->lpcSize, spx_mem_t);
+
+   /* Loop on sub-frames */
+   for (sub=0;sub<st->nbSubframes;sub++)
+   {
+      int   offset;
+      spx_word16_t *sw;
+      spx_word16_t *exc;
+      spx_sig_t *innov_save = NULL;
+      int pitch;
+      int response_bound = st->subframeSize;
+#ifdef EPIC_48K
+      if (st->lbr_48k)
+      {
+         if (sub*2 < st->nbSubframes)
+            ol_pitch = pitch_half[0];
+         else
+            ol_pitch = pitch_half[1];
+      }
+#endif
+
+      /* Offset relative to start of frame */
+      offset = st->subframeSize*sub;
+      /* Excitation */
+      exc=st->exc+offset;
+      /* Weighted signal */
+      sw=st->sw+offset;
+      /* Pointer for saving innovation */
+      if (st->innov_save)
+         innov_save = st->innov_save+offset;
+      
+      /* LSP interpolation (quantized and unquantized) */
+      lsp_interpolate(st->old_lsp, lsp, interp_lsp, st->lpcSize, sub, st->nbSubframes);
+      lsp_interpolate(st->old_qlsp, qlsp, interp_qlsp, st->lpcSize, sub, st->nbSubframes);
+
+      /* Make sure the filters are stable */
+      lsp_enforce_margin(interp_lsp, st->lpcSize, LSP_MARGIN);
+      lsp_enforce_margin(interp_qlsp, st->lpcSize, LSP_MARGIN);
+
+      /* Compute interpolated LPCs (quantized and unquantized) */
+      lsp_to_lpc(interp_lsp, interp_lpc, st->lpcSize,stack);
+
+      lsp_to_lpc(interp_qlsp, interp_qlpc, st->lpcSize, stack);
+
+      /* Compute analysis filter gain at w=pi (for use in SB-CELP) */
+      {
+         spx_word32_t pi_g=LPC_SCALING;
+         for (i=0;i<st->lpcSize;i+=2)
+         {
+            /*pi_g += -st->interp_qlpc[i] +  st->interp_qlpc[i+1];*/
+            pi_g = ADD32(pi_g, SUB32(EXTEND32(interp_qlpc[i+1]),EXTEND32(interp_qlpc[i])));
+         }
+         st->pi_gain[sub] = pi_g;
+      }
+
+#ifdef VORBIS_PSYCHO
+      {
+         float curr_curve[128];
+         float fact = ((float)sub+1.0f)/st->nbSubframes;
+         for (i=0;i<128;i++)
+            curr_curve[i] = (1.0f-fact)*st->old_curve[i] + fact*st->curve[i];
+         curve_to_lpc(st->psy, curr_curve, bw_lpc1, bw_lpc2, 10);
+      }
+#else
+      /* Compute bandwidth-expanded (unquantized) LPCs for perceptual weighting */
+      bw_lpc(st->gamma1, interp_lpc, bw_lpc1, st->lpcSize);
+      if (st->gamma2>=0)
+         bw_lpc(st->gamma2, interp_lpc, bw_lpc2, st->lpcSize);
+      else
+      {
+         bw_lpc2[0]=1;
+         for (i=1;i<=st->lpcSize;i++)
+            bw_lpc2[i]=0;
+      }
+      /*print_vec(st->bw_lpc1, 10, "bw_lpc");*/
+#endif
+
+      {
+         /*FIXME: This will break if we change the window size */
+         if (st->windowSize-st->frameSize != st->subframeSize)
+            speex_error("windowSize-frameSize != subframeSize");
+         if (sub==0)
+         {
+            for (i=0;i<st->subframeSize;i++)
+               real_exc[i] = sw[i] = st->winBuf[i];
+         } else {
+            for (i=0;i<st->subframeSize;i++)
+               real_exc[i] = sw[i] = in[i+((sub-1)*st->subframeSize)];
+         }
+      }
+      fir_mem16(real_exc, interp_qlpc, real_exc, st->subframeSize, st->lpcSize, st->mem_exc2, stack);
+      
+      if (st->complexity==0)
+         response_bound >>= 1;
+      compute_impulse_response(interp_qlpc, bw_lpc1, bw_lpc2, syn_resp, response_bound, st->lpcSize, stack);
+      for (i=response_bound;i<st->subframeSize;i++)
+         syn_resp[i]=VERY_SMALL;
+      
+      /* Compute zero response of A(z/g1) / ( A(z/g2) * A(z) ) */
+      for (i=0;i<st->lpcSize;i++)
+         mem[i]=SHL32(st->mem_sp[i],1);
+      for (i=0;i<st->subframeSize;i++)
+         ringing[i] = VERY_SMALL;
+#ifdef SHORTCUTS2
+      iir_mem16(ringing, interp_qlpc, ringing, response_bound, st->lpcSize, mem, stack);
+      for (i=0;i<st->lpcSize;i++)
+         mem[i]=SHL32(st->mem_sw[i],1);
+      filter_mem16(ringing, st->bw_lpc1, st->bw_lpc2, ringing, response_bound, st->lpcSize, mem, stack);
+      for (i=response_bound;i<st->subframeSize;i++)
+         ringing[i]=0;
+#else
+      iir_mem16(ringing, interp_qlpc, ringing, st->subframeSize, st->lpcSize, mem, stack);
+      for (i=0;i<st->lpcSize;i++)
+         mem[i]=SHL32(st->mem_sw[i],1);
+      filter_mem16(ringing, bw_lpc1, bw_lpc2, ringing, st->subframeSize, st->lpcSize, mem, stack);
+#endif
+      
+      /* Compute weighted signal */
+      for (i=0;i<st->lpcSize;i++)
+         mem[i]=st->mem_sw[i];
+      filter_mem16(sw, bw_lpc1, bw_lpc2, sw, st->subframeSize, st->lpcSize, mem, stack);
+      
+      if (st->complexity==0)
+         for (i=0;i<st->lpcSize;i++)
+            st->mem_sw[i]=mem[i];
+      
+      /* Compute target signal */
+      for (i=0;i<st->subframeSize;i++)
+         target[i]=SUB16(sw[i],PSHR32(ringing[i],1));
+
+      /* Reset excitation */
+      for (i=0;i<st->subframeSize;i++)
+         exc[i]=0;
+
+      /* If we have a long-term predictor (otherwise, something's wrong) */
+      if (SUBMODE(ltp_quant))
+      {
+         int pit_min, pit_max;
+         /* Long-term prediction */
+         if (SUBMODE(lbr_pitch) != -1)
+         {
+            /* Low bit-rate pitch handling */
+            int margin;
+            margin = SUBMODE(lbr_pitch);
+            if (margin)
+            {
+               if (ol_pitch < st->min_pitch+margin-1)
+                  ol_pitch=st->min_pitch+margin-1;
+               if (ol_pitch > st->max_pitch-margin)
+                  ol_pitch=st->max_pitch-margin;
+               pit_min = ol_pitch-margin+1;
+               pit_max = ol_pitch+margin;
+            } else {
+               pit_min=pit_max=ol_pitch;
+            }
+         } else {
+            pit_min = st->min_pitch;
+            pit_max = st->max_pitch;
+         }
+         
+         /* Force pitch to use only the current frame if needed */
+         if (st->bounded_pitch && pit_max>offset)
+            pit_max=offset;
+
+#ifdef EPIC_48K
+         if (st->lbr_48k)
+         {
+            pitch = SUBMODE(ltp_quant)(target, sw, interp_qlpc, bw_lpc1, bw_lpc2,
+                                       exc32, SUBMODE(ltp_params), pit_min, pit_max, ol_pitch_coef,
+                                       st->lpcSize, st->subframeSize, bits, stack, 
+                                       exc, syn_resp, st->complexity, ol_pitch_id, st->plc_tuning, &st->cumul_gain);
+         } else {
+#endif
+
+         /* Perform pitch search */
+         pitch = SUBMODE(ltp_quant)(target, sw, interp_qlpc, bw_lpc1, bw_lpc2,
+                                    exc32, SUBMODE(ltp_params), pit_min, pit_max, ol_pitch_coef,
+                                    st->lpcSize, st->subframeSize, bits, stack, 
+                                    exc, syn_resp, st->complexity, 0, st->plc_tuning, &st->cumul_gain);
+#ifdef EPIC_48K
+         }
+#endif
+
+         st->pitch[sub]=pitch;
+      } else {
+         speex_error ("No pitch prediction, what's wrong");
+      }
+
+      /* Quantization of innovation */
+      {
+         spx_word32_t ener=0;
+         spx_word16_t fine_gain;
+
+         for (i=0;i<st->subframeSize;i++)
+            innov[i]=0;
+         
+         for (i=0;i<st->subframeSize;i++)
+            real_exc[i] = SUB16(real_exc[i], PSHR32(exc32[i],SIG_SHIFT-1));
+
+         ener = SHL32(EXTEND32(compute_rms16(real_exc, st->subframeSize)),SIG_SHIFT);
+         
+         /*FIXME: Should use DIV32_16 and make sure result fits in 16 bits */
+#ifdef FIXED_POINT
+         {
+            spx_word32_t f = PDIV32(ener,PSHR32(ol_gain,SIG_SHIFT));
+            if (f<=32767)
+               fine_gain = f;
+            else
+               fine_gain = 32767;
+         }
+#else
+         fine_gain = PDIV32_16(ener,PSHR32(ol_gain,SIG_SHIFT));
+#endif
+         /* Calculate gain correction for the sub-frame (if any) */
+         if (SUBMODE(have_subframe_gain)) 
+         {
+            int qe;
+            if (SUBMODE(have_subframe_gain)==3)
+            {
+               qe = scal_quant(fine_gain, exc_gain_quant_scal3_bound, 8);
+               speex_bits_pack(bits, qe, 3);
+               ener=MULT16_32_Q14(exc_gain_quant_scal3[qe],ol_gain);
+            } else {
+               qe = scal_quant(fine_gain, exc_gain_quant_scal1_bound, 2);
+               speex_bits_pack(bits, qe, 1);
+               ener=MULT16_32_Q14(exc_gain_quant_scal1[qe],ol_gain);               
+            }
+         } else {
+            ener=ol_gain;
+         }
+
+         /*printf ("%f %f\n", ener, ol_gain);*/
+
+         /* Normalize innovation */
+         signal_div(target, target, ener, st->subframeSize);
+
+         /* Quantize innovation */
+         if (SUBMODE(innovation_quant))
+         {
+            /* Codebook search */
+            SUBMODE(innovation_quant)(target, interp_qlpc, bw_lpc1, bw_lpc2, 
+                                      SUBMODE(innovation_params), st->lpcSize, st->subframeSize, 
+                                      innov, syn_resp, bits, stack, st->complexity, SUBMODE(double_codebook));
+            
+            /* De-normalize innovation and update excitation */
+            signal_mul(innov, innov, ener, st->subframeSize);
+
+            for (i=0;i<st->subframeSize;i++)
+               exc[i] = EXTRACT16(PSHR32(ADD32(SHL32(exc32[i],1),innov[i]),SIG_SHIFT));
+         } else {
+            speex_error("No fixed codebook");
+         }
+
+         if (innov_save)
+         {
+            for (i=0;i<st->subframeSize;i++)
+               innov_save[i] = innov[i];
+         }
+         /* In some (rare) modes, we do a second search (more bits) to reduce noise even more */
+         if (SUBMODE(double_codebook)) {
+            char *tmp_stack=stack;
+            VARDECL(spx_sig_t *innov2);
+            ALLOC(innov2, st->subframeSize, spx_sig_t);
+            for (i=0;i<st->subframeSize;i++)
+               innov2[i]=0;
+            for (i=0;i<st->subframeSize;i++)
+               target[i]=MULT16_16_P13(QCONST16(2.2,13), target[i]);
+            SUBMODE(innovation_quant)(target, interp_qlpc, bw_lpc1, bw_lpc2, 
+                                      SUBMODE(innovation_params), st->lpcSize, st->subframeSize, 
+                                      innov2, syn_resp, bits, stack, st->complexity, 0);
+            signal_mul(innov2, innov2, MULT16_32_Q15(QCONST16(0.454545,15),ener), st->subframeSize);
+            for (i=0;i<st->subframeSize;i++)
+               exc[i] = ADD32(exc[i],PSHR32(innov2[i],SIG_SHIFT));
+            if (innov_save)
+            {
+               for (i=0;i<st->subframeSize;i++)
+                  innov_save[i] = ADD32(innov_save[i],innov2[i]);
+            }
+            stack = tmp_stack;
+         }
+
+      }
+
+      for (i=0;i<st->subframeSize;i++)
+         sw[i] = exc[i];
+      /* Final signal synthesis from excitation */
+      iir_mem16(sw, interp_qlpc, sw, st->subframeSize, st->lpcSize, st->mem_sp, stack);
+
+      /* Compute weighted signal again, from synthesized speech (not sure it's the right thing) */
+      if (st->complexity!=0)
+         filter_mem16(sw, bw_lpc1, bw_lpc2, sw, st->subframeSize, st->lpcSize, st->mem_sw, stack);
+      
+   }
+
+   /* Store the LSPs for interpolation in the next frame */
+   if (st->submodeID>=1)
+   {
+      for (i=0;i<st->lpcSize;i++)
+         st->old_lsp[i] = lsp[i];
+      for (i=0;i<st->lpcSize;i++)
+         st->old_qlsp[i] = qlsp[i];
+   }
+
+#ifdef VORBIS_PSYCHO
+   if (st->submodeID>=1)
+   {
+      for (i=0;i<128;i++)
+         st->old_curve[i] = st->curve[i];
+   }
+#endif
+
+   if (st->submodeID==1)
+   {
+      if (st->dtx_count)
+         speex_bits_pack(bits, 15, 4);
+      else
+         speex_bits_pack(bits, 0, 4);
+   }
+
+   /* The next frame will not be the first (Duh!) */
+   st->first = 0;
+   speex_move(st->winBuf, in+2*st->frameSize-st->windowSize, (st->windowSize-st->frameSize)*sizeof(spx_word16_t));
+
+   if (SUBMODE(innovation_quant) == noise_codebook_quant || st->submodeID==0)
+      st->bounded_pitch = 1;
+   else
+      st->bounded_pitch = 0;
+
+   return 1;
+}
+
+void *nb_decoder_init(const SpeexMode *m)
+{
+   DecState *st;
+   const SpeexNBMode *mode;
+   int i;
+
+   mode=(const SpeexNBMode*)m->mode;
+   st = (DecState *)speex_alloc(sizeof(DecState));
+   if (!st)
+      return NULL;
+#if defined(VAR_ARRAYS) || defined (USE_ALLOCA)
+   st->stack = NULL;
+#else
+   st->stack = (char*)speex_alloc_scratch(NB_DEC_STACK);
+#endif
+
+   st->mode=m;
+
+
+   st->encode_submode = 1;
+#ifdef EPIC_48K
+   st->lbr_48k=mode->lbr48k;
+#endif
+
+   st->first=1;
+   /* Codec parameters, should eventually have several "modes"*/
+   st->frameSize = mode->frameSize;
+   st->nbSubframes=mode->frameSize/mode->subframeSize;
+   st->subframeSize=mode->subframeSize;
+   st->lpcSize = mode->lpcSize;
+   st->min_pitch=mode->pitchStart;
+   st->max_pitch=mode->pitchEnd;
+
+   st->submodes=mode->submodes;
+   st->submodeID=mode->defaultSubmode;
+
+   st->lpc_enh_enabled=1;
+
+   st->excBuf = (spx_word16_t*)speex_alloc((st->frameSize + 2*st->max_pitch + st->subframeSize + 12)*sizeof(spx_word16_t));
+   st->exc = st->excBuf + 2*st->max_pitch + st->subframeSize + 6;
+   for (i=0;i<st->frameSize + st->max_pitch + 1;i++)
+      st->excBuf[i]=0;
+
+   st->interp_qlpc = (spx_coef_t*)speex_alloc(st->lpcSize*sizeof(spx_coef_t));
+   st->old_qlsp = (spx_lsp_t*)speex_alloc(st->lpcSize*sizeof(spx_lsp_t));
+   st->mem_sp = (spx_mem_t*)speex_alloc(st->lpcSize*sizeof(spx_mem_t));
+   st->pi_gain = (spx_word32_t*)speex_alloc((st->nbSubframes)*sizeof(spx_word32_t));
+   st->last_pitch = 40;
+   st->count_lost=0;
+   st->pitch_gain_buf[0] = st->pitch_gain_buf[1] = st->pitch_gain_buf[2] = 0;
+   st->pitch_gain_buf_idx = 0;
+   st->seed = 1000;
+   
+   st->sampling_rate=8000;
+   st->last_ol_gain = 0;
+
+   st->user_callback.func = &speex_default_user_handler;
+   st->user_callback.data = NULL;
+   for (i=0;i<16;i++)
+      st->speex_callbacks[i].func = NULL;
+
+   st->voc_m1=st->voc_m2=st->voc_mean=0;
+   st->voc_offset=0;
+   st->dtx_enabled=0;
+   st->isWideband = 0;
+   st->highpass_enabled = 1;
+
+#ifdef ENABLE_VALGRIND
+   VALGRIND_MAKE_READABLE(st, (st->stack-(char*)st));
+#endif
+   return st;
+}
+
+void nb_decoder_destroy(void *state)
+{
+   DecState *st;
+   st=(DecState*)state;
+   
+#if !(defined(VAR_ARRAYS) || defined (USE_ALLOCA))
+   speex_free_scratch(st->stack);
+#endif
+
+   speex_free (st->excBuf);
+   speex_free (st->interp_qlpc);
+   speex_free (st->old_qlsp);
+   speex_free (st->mem_sp);
+   speex_free (st->pi_gain);
+
+   speex_free(state);
+}
+
+#define median3(a, b, c)	((a) < (b) ? ((b) < (c) ? (b) : ((a) < (c) ? (c) : (a))) : ((c) < (b) ? (b) : ((c) < (a) ? (c) : (a))))
+
+#ifdef FIXED_POINT
+const spx_word16_t attenuation[10] = {32767, 31483, 27923, 22861, 17278, 12055, 7764, 4616, 2533, 1283};
+#else
+const spx_word16_t attenuation[10] = {1., 0.961, 0.852, 0.698, 0.527, 0.368, 0.237, 0.141, 0.077, 0.039};
+
+#endif
+
+static void nb_decode_lost(DecState *st, spx_word16_t *out, char *stack)
+{
+   int i;
+   int pitch_val;
+   spx_word16_t pitch_gain;
+   spx_word16_t fact;
+   spx_word16_t gain_med;
+   spx_word16_t innov_gain;
+   spx_word16_t noise_gain;
+   
+   if (st->count_lost<10)
+      fact = attenuation[st->count_lost];
+   else
+      fact = 0;
+
+   gain_med = median3(st->pitch_gain_buf[0], st->pitch_gain_buf[1], st->pitch_gain_buf[2]);
+   if (gain_med < st->last_pitch_gain)
+      st->last_pitch_gain = gain_med;
+   
+#ifdef FIXED_POINT
+   pitch_gain = st->last_pitch_gain;
+   if (pitch_gain>54)
+      pitch_gain = 54;
+   pitch_gain = SHL(pitch_gain, 9);
+#else   
+   pitch_gain = GAIN_SCALING_1*st->last_pitch_gain;
+   if (pitch_gain>.85)
+      pitch_gain=.85;
+#endif
+   pitch_gain = MULT16_16_Q15(fact,pitch_gain) + VERY_SMALL;
+   /* FIXME: This was rms of innovation (not exc) */
+   innov_gain = compute_rms16(st->exc, st->frameSize);
+   noise_gain = MULT16_16_Q15(innov_gain, MULT16_16_Q15(fact, SUB16(Q15ONE,MULT16_16_Q15(pitch_gain,pitch_gain))));
+   /* Shift all buffers by one frame */
+   speex_move(st->excBuf, st->excBuf+st->frameSize, (2*st->max_pitch + st->subframeSize + 12)*sizeof(spx_word16_t));
+   
+
+   pitch_val = st->last_pitch + SHR32((spx_int32_t)speex_rand(1+st->count_lost, &st->seed),SIG_SHIFT);
+   if (pitch_val > st->max_pitch)
+      pitch_val = st->max_pitch;
+   if (pitch_val < st->min_pitch)
+      pitch_val = st->min_pitch;
+   for (i=0;i<st->frameSize;i++)
+   {
+      st->exc[i]= MULT16_16_Q15(pitch_gain, (st->exc[i-pitch_val]+VERY_SMALL)) + 
+            speex_rand(noise_gain, &st->seed);
+   }
+
+   for (i=0;i<st->frameSize;i++)
+      out[i]=st->exc[i-st->subframeSize];
+   bw_lpc(QCONST16(.98,15), st->interp_qlpc, st->interp_qlpc, st->lpcSize);
+   iir_mem16(out, st->interp_qlpc, out, st->frameSize, st->lpcSize, 
+             st->mem_sp, stack);
+   highpass(out, out, st->frameSize, HIGHPASS_NARROWBAND|HIGHPASS_OUTPUT, st->mem_hp);
+   
+   st->first = 0;
+   st->count_lost++;
+   st->pitch_gain_buf[st->pitch_gain_buf_idx++] = PSHR(pitch_gain,9);
+   if (st->pitch_gain_buf_idx > 2) /* rollover */
+      st->pitch_gain_buf_idx = 0;
+}
+
+
+int nb_decode(void *state, SpeexBits *bits, void *vout)
+{
+   DecState *st;
+   int i, sub;
+   int pitch;
+   spx_word16_t pitch_gain[3];
+   spx_word32_t ol_gain=0;
+   int ol_pitch=0;
+   spx_word16_t ol_pitch_coef=0;
+   int best_pitch=40;
+   spx_word16_t best_pitch_gain=0;
+   int wideband;
+   int m;
+   char *stack;
+   VARDECL(spx_sig_t *innov);
+   VARDECL(spx_word32_t *exc32);
+   VARDECL(spx_coef_t *ak);
+   VARDECL(spx_lsp_t *qlsp);
+   spx_word16_t pitch_average=0;
+#ifdef EPIC_48K
+   int pitch_half[2];
+   int ol_pitch_id=0;
+#endif
+   spx_word16_t *out = (spx_word16_t*)vout;
+   VARDECL(spx_lsp_t *interp_qlsp);
+
+   st=(DecState*)state;
+   stack=st->stack;
+
+   /* Check if we're in DTX mode*/
+   if (!bits && st->dtx_enabled)
+   {
+      st->submodeID=0;
+   } else 
+   {
+      /* If bits is NULL, consider the packet to be lost (what could we do anyway) */
+      if (!bits)
+      {
+         nb_decode_lost(st, out, stack);
+         return 0;
+      }
+
+      if (st->encode_submode)
+      {
+#ifdef EPIC_48K
+         if (!st->lbr_48k) {
+#endif
+
+      /* Search for next narrowband block (handle requests, skip wideband blocks) */
+      do {
+         if (speex_bits_remaining(bits)<5)
+            return -1;
+         wideband = speex_bits_unpack_unsigned(bits, 1);
+         if (wideband) /* Skip wideband block (for compatibility) */
+         {
+            int submode;
+            int advance;
+            advance = submode = speex_bits_unpack_unsigned(bits, SB_SUBMODE_BITS);
+            speex_mode_query(&speex_wb_mode, SPEEX_SUBMODE_BITS_PER_FRAME, &advance);
+            if (advance < 0)
+            {
+               speex_warning ("Invalid wideband mode encountered. Corrupted stream?");
+               return -2;
+            } 
+            advance -= (SB_SUBMODE_BITS+1);
+            speex_bits_advance(bits, advance);
+            
+            if (speex_bits_remaining(bits)<5)
+               return -1;
+            wideband = speex_bits_unpack_unsigned(bits, 1);
+            if (wideband)
+            {
+               advance = submode = speex_bits_unpack_unsigned(bits, SB_SUBMODE_BITS);
+               speex_mode_query(&speex_wb_mode, SPEEX_SUBMODE_BITS_PER_FRAME, &advance);
+               if (advance < 0)
+               {
+                  speex_warning ("Invalid wideband mode encountered: corrupted stream?");
+                  return -2;
+               } 
+               advance -= (SB_SUBMODE_BITS+1);
+               speex_bits_advance(bits, advance);
+               wideband = speex_bits_unpack_unsigned(bits, 1);
+               if (wideband)
+               {
+                  speex_warning ("More than two wideband layers found: corrupted stream?");
+                  return -2;
+               }
+
+            }
+         }
+         if (speex_bits_remaining(bits)<4)
+            return -1;
+         /* FIXME: Check for overflow */
+         m = speex_bits_unpack_unsigned(bits, 4);
+         if (m==15) /* We found a terminator */
+         {
+            return -1;
+         } else if (m==14) /* Speex in-band request */
+         {
+            int ret = speex_inband_handler(bits, st->speex_callbacks, state);
+            if (ret)
+               return ret;
+         } else if (m==13) /* User in-band request */
+         {
+            int ret = st->user_callback.func(bits, state, st->user_callback.data);
+            if (ret)
+               return ret;
+         } else if (m>8) /* Invalid mode */
+         {
+            speex_warning("Invalid mode encountered: corrupted stream?");
+            return -2;
+         }
+      
+      } while (m>8);
+
+      /* Get the sub-mode that was used */
+      st->submodeID = m;
+#ifdef EPIC_48K
+         }
+#endif
+      }
+
+   }
+
+   /* Shift all buffers by one frame */
+   speex_move(st->excBuf, st->excBuf+st->frameSize, (2*st->max_pitch + st->subframeSize + 12)*sizeof(spx_word16_t));
+
+   /* If null mode (no transmission), just set a couple things to zero*/
+   if (st->submodes[st->submodeID] == NULL)
+   {
+      VARDECL(spx_coef_t *lpc);
+      ALLOC(lpc, st->lpcSize, spx_coef_t);
+      bw_lpc(GAMMA_SCALING*.93, st->interp_qlpc, lpc, st->lpcSize);
+      {
+         float innov_gain=0;
+         float pgain=GAIN_SCALING_1*st->last_pitch_gain;
+         if (pgain>.6)
+            pgain=.6;
+         /* FIXME: This was innov, not exc */
+         innov_gain = compute_rms16(st->exc, st->frameSize);
+         for (i=0;i<st->frameSize;i++)
+            st->exc[i]=speex_rand(innov_gain, &st->seed);
+      }
+
+
+      st->first=1;
+
+      for (i=0;i<st->frameSize;i++)
+         out[i] = st->exc[i];
+      /* Final signal synthesis from excitation */
+      iir_mem16(out, lpc, out, st->frameSize, st->lpcSize, st->mem_sp, stack);
+
+      st->count_lost=0;
+      return 0;
+   }
+
+   ALLOC(qlsp, st->lpcSize, spx_lsp_t);
+
+   /* Unquantize LSPs */
+   SUBMODE(lsp_unquant)(qlsp, st->lpcSize, bits);
+
+   /*Damp memory if a frame was lost and the LSP changed too much*/
+   if (st->count_lost)
+   {
+      spx_word16_t fact;
+      spx_word32_t lsp_dist=0;
+      for (i=0;i<st->lpcSize;i++)
+         lsp_dist = ADD32(lsp_dist, EXTEND32(ABS(st->old_qlsp[i] - qlsp[i])));
+#ifdef FIXED_POINT
+      fact = SHR16(19661,SHR32(lsp_dist,LSP_SHIFT+2));      
+#else
+      fact = .6*exp(-.2*lsp_dist);
+#endif
+      for (i=0;i<st->lpcSize;i++)
+         st->mem_sp[i] = MULT16_32_Q15(fact,st->mem_sp[i]);
+   }
+
+
+   /* Handle first frame and lost-packet case */
+   if (st->first || st->count_lost)
+   {
+      for (i=0;i<st->lpcSize;i++)
+         st->old_qlsp[i] = qlsp[i];
+   }
+
+#ifdef EPIC_48K
+   if (st->lbr_48k) {
+      pitch_half[0] = st->min_pitch+speex_bits_unpack_unsigned(bits, 7);
+      pitch_half[1] = pitch_half[0]+speex_bits_unpack_unsigned(bits, 2)-1;
+
+      ol_pitch_id = speex_bits_unpack_unsigned(bits, 3);
+      ol_pitch_coef=GAIN_SCALING*0.13514*ol_pitch_id;
+
+      {
+         int qe;
+         qe = speex_bits_unpack_unsigned(bits, 4);
+         ol_gain = SIG_SCALING*exp((qe+2)/2.1),SIG_SHIFT;
+      }
+
+   } else {
+#endif
+
+   /* Get open-loop pitch estimation for low bit-rate pitch coding */
+   if (SUBMODE(lbr_pitch)!=-1)
+   {
+      ol_pitch = st->min_pitch+speex_bits_unpack_unsigned(bits, 7);
+   } 
+   
+   if (SUBMODE(forced_pitch_gain))
+   {
+      int quant;
+      quant = speex_bits_unpack_unsigned(bits, 4);
+      ol_pitch_coef=GAIN_SCALING*0.066667*quant;
+   }
+   
+   /* Get global excitation gain */
+   {
+      int qe;
+      qe = speex_bits_unpack_unsigned(bits, 5);
+#ifdef FIXED_POINT
+      ol_gain = MULT16_32_Q15(28406,ol_gain_table[qe]);
+#else
+      ol_gain = SIG_SCALING*exp(qe/3.5);
+#endif
+   }
+#ifdef EPIC_48K
+   }
+#endif
+
+   ALLOC(ak, st->lpcSize, spx_coef_t);
+   ALLOC(innov, st->subframeSize, spx_sig_t);
+   ALLOC(exc32, st->subframeSize, spx_word32_t);
+
+   if (st->submodeID==1)
+   {
+      int extra;
+      extra = speex_bits_unpack_unsigned(bits, 4);
+
+      if (extra==15)
+         st->dtx_enabled=1;
+      else
+         st->dtx_enabled=0;
+   }
+   if (st->submodeID>1)
+      st->dtx_enabled=0;
+
+   /*Loop on subframes */
+   for (sub=0;sub<st->nbSubframes;sub++)
+   {
+      int offset;
+      spx_word16_t *exc;
+      spx_word16_t *sp;
+      spx_sig_t *innov_save = NULL;
+      spx_word16_t tmp;
+
+#ifdef EPIC_48K
+      if (st->lbr_48k)
+      {
+         if (sub*2 < st->nbSubframes)
+            ol_pitch = pitch_half[0];
+         else
+            ol_pitch = pitch_half[1];
+      }
+#endif
+
+      /* Offset relative to start of frame */
+      offset = st->subframeSize*sub;
+      /* Excitation */
+      exc=st->exc+offset;
+      /* Original signal */
+      sp=out+offset;
+      if (st->innov_save)
+         innov_save = st->innov_save+offset;
+
+
+      /* Reset excitation */
+      for (i=0;i<st->subframeSize;i++)
+         exc[i]=0;
+
+      /*Adaptive codebook contribution*/
+      if (SUBMODE(ltp_unquant))
+      {
+         int pit_min, pit_max;
+         /* Handle pitch constraints if any */
+         if (SUBMODE(lbr_pitch) != -1)
+         {
+            int margin;
+            margin = SUBMODE(lbr_pitch);
+            if (margin)
+            {
+/* GT - need optimization?
+               if (ol_pitch < st->min_pitch+margin-1)
+                  ol_pitch=st->min_pitch+margin-1;
+               if (ol_pitch > st->max_pitch-margin)
+                  ol_pitch=st->max_pitch-margin;
+               pit_min = ol_pitch-margin+1;
+               pit_max = ol_pitch+margin;
+*/
+               pit_min = ol_pitch-margin+1;
+               if (pit_min < st->min_pitch)
+		  pit_min = st->min_pitch;
+               pit_max = ol_pitch+margin;
+               if (pit_max > st->max_pitch)
+		  pit_max = st->max_pitch;
+            } else {
+               pit_min = pit_max = ol_pitch;
+            }
+         } else {
+            pit_min = st->min_pitch;
+            pit_max = st->max_pitch;
+         }
+
+
+#ifdef EPIC_48K
+         if (st->lbr_48k)
+         {
+             SUBMODE(ltp_unquant)(exc, exc32, pit_min, pit_max, ol_pitch_coef, SUBMODE(ltp_params), 
+                                  st->subframeSize, &pitch, &pitch_gain[0], bits, stack, 
+                                  st->count_lost, offset, st->last_pitch_gain, ol_pitch_id);
+         } else {
+#endif
+
+             SUBMODE(ltp_unquant)(exc, exc32, pit_min, pit_max, ol_pitch_coef, SUBMODE(ltp_params), 
+                                  st->subframeSize, &pitch, &pitch_gain[0], bits, stack, 
+                                  st->count_lost, offset, st->last_pitch_gain, 0);
+
+#ifdef EPIC_48K
+         }
+#endif
+
+         tmp = gain_3tap_to_1tap(pitch_gain);
+
+         pitch_average += tmp;
+         if ((tmp>best_pitch_gain&&ABS(2*best_pitch-pitch)>=3&&ABS(3*best_pitch-pitch)>=4&&ABS(4*best_pitch-pitch)>=5) 
+              || (tmp>MULT16_16_Q15(QCONST16(.6,15),best_pitch_gain)&&(ABS(best_pitch-2*pitch)<3||ABS(best_pitch-3*pitch)<4||ABS(best_pitch-4*pitch)<5)) 
+              || (MULT16_16_Q15(QCONST16(.67,15),tmp)>best_pitch_gain&&(ABS(2*best_pitch-pitch)<3||ABS(3*best_pitch-pitch)<4||ABS(4*best_pitch-pitch)<5)) )
+         {
+            best_pitch = pitch;
+            if (tmp > best_pitch_gain)
+               best_pitch_gain = tmp;
+         }
+      } else {
+         speex_error("No pitch prediction, what's wrong");
+      }
+      
+      /* Unquantize the innovation */
+      {
+         int q_energy;
+         spx_word32_t ener;
+         
+         for (i=0;i<st->subframeSize;i++)
+            innov[i]=0;
+
+         /* Decode sub-frame gain correction */
+         if (SUBMODE(have_subframe_gain)==3)
+         {
+            q_energy = speex_bits_unpack_unsigned(bits, 3);
+            ener = MULT16_32_Q14(exc_gain_quant_scal3[q_energy],ol_gain);
+         } else if (SUBMODE(have_subframe_gain)==1)
+         {
+            q_energy = speex_bits_unpack_unsigned(bits, 1);
+            ener = MULT16_32_Q14(exc_gain_quant_scal1[q_energy],ol_gain);
+         } else {
+            ener = ol_gain;
+         }
+                  
+         if (SUBMODE(innovation_unquant))
+         {
+            /*Fixed codebook contribution*/
+            SUBMODE(innovation_unquant)(innov, SUBMODE(innovation_params), st->subframeSize, bits, stack, &st->seed);
+         } else {
+            speex_error("No fixed codebook");
+         }
+
+         /* De-normalize innovation and update excitation */
+#ifdef FIXED_POINT
+         signal_mul(innov, innov, ener, st->subframeSize);
+#else
+         signal_mul(innov, innov, ener, st->subframeSize);
+#endif
+         /*Vocoder mode*/
+         if (st->submodeID==1) 
+         {
+            float g=ol_pitch_coef*GAIN_SCALING_1;
+
+            
+            for (i=0;i<st->subframeSize;i++)
+               exc[i]=0;
+            while (st->voc_offset<st->subframeSize)
+            {
+               if (st->voc_offset>=0)
+                  exc[st->voc_offset]=sqrt(1.0*ol_pitch);
+               st->voc_offset+=ol_pitch;
+            }
+            st->voc_offset -= st->subframeSize;
+
+            g=.5+2*(g-.6);
+            if (g<0)
+               g=0;
+            if (g>1)
+               g=1;
+            for (i=0;i<st->subframeSize;i++)
+            {
+               spx_word16_t exci=exc[i];
+               /* FIXME: cleanup the innov[i]/SIG_SCALING */
+               exc[i]=.8*g*exc[i]*PSHR32(ol_gain,SIG_SHIFT) + .6*g*st->voc_m1*PSHR32(ol_gain,SIG_SHIFT) + (1-.5*g)*PSHR32(innov[i],SIG_SHIFT) - .5*g*PSHR32(st->voc_m2,SIG_SHIFT);
+               st->voc_m1 = exci;
+               st->voc_m2=innov[i];
+               st->voc_mean = .95*st->voc_mean + .05*exc[i];
+               exc[i]-=st->voc_mean;
+            }
+         } else {
+            for (i=0;i<st->subframeSize;i++)
+               exc[i]=PSHR32(ADD32(SHL32(exc32[i],1),innov[i]),SIG_SHIFT);
+            /*print_vec(exc, 40, "innov");*/
+         }
+         if (innov_save)
+         {
+            for (i=0;i<st->subframeSize;i++)
+               innov_save[i] = innov[i];
+         }
+         /* Decode second codebook (only for some modes) */
+         if (SUBMODE(double_codebook))
+         {
+            char *tmp_stack=stack;
+            VARDECL(spx_sig_t *innov2);
+            ALLOC(innov2, st->subframeSize, spx_sig_t);
+            for (i=0;i<st->subframeSize;i++)
+               innov2[i]=0;
+            SUBMODE(innovation_unquant)(innov2, SUBMODE(innovation_params), st->subframeSize, bits, stack, &st->seed);
+            signal_mul(innov2, innov2, MULT16_32_Q15(QCONST16(0.454545,15),ener), st->subframeSize);
+            for (i=0;i<st->subframeSize;i++)
+               exc[i] = ADD16(exc[i],PSHR32(innov2[i],SIG_SHIFT));
+            if (innov_save)
+            {
+               for (i=0;i<st->subframeSize;i++)
+                  innov_save[i] = ADD32(innov_save[i],innov2[i]);
+            }
+            stack = tmp_stack;
+         }
+      }
+   }
+   
+   ALLOC(interp_qlsp, st->lpcSize, spx_lsp_t);
+
+   if (st->lpc_enh_enabled && SUBMODE(comb_gain)>0 && !st->count_lost)
+   {
+      multicomb(st->exc-st->subframeSize, out, st->interp_qlpc, st->lpcSize, 2*st->subframeSize, best_pitch, 40, SUBMODE(comb_gain), stack);
+      multicomb(st->exc+st->subframeSize, out+2*st->subframeSize, st->interp_qlpc, st->lpcSize, 2*st->subframeSize, best_pitch, 40, SUBMODE(comb_gain), stack);
+   } else {
+      for (i=0;i<st->frameSize;i++)
+         out[i]=st->exc[i-st->subframeSize];
+   }
+   
+   /* If the last packet was lost, re-scale the excitation to obtain the same energy as encoded in ol_gain */
+   if (st->count_lost) 
+   {
+      spx_word16_t exc_ener;
+      spx_word32_t gain32;
+      spx_word16_t gain;
+      exc_ener = compute_rms16 (st->exc, st->frameSize);
+      gain32 = PDIV32(ol_gain, ADD16(exc_ener,1));
+#ifdef FIXED_POINT
+      if (gain32 > 32767)
+         gain32 = 32767;
+      gain = EXTRACT16(gain32);
+#else
+      if (gain32 > 2)
+         gain32=2;
+      gain = gain32;
+#endif
+      for (i=0;i<st->frameSize;i++)
+      {
+         st->exc[i] = MULT16_16_Q14(gain, st->exc[i]);
+         out[i]=st->exc[i-st->subframeSize];
+      }
+   }
+
+   /*Loop on subframes */
+   for (sub=0;sub<st->nbSubframes;sub++)
+   {
+      int offset;
+      spx_word16_t *sp;
+      spx_word16_t *exc;
+      /* Offset relative to start of frame */
+      offset = st->subframeSize*sub;
+      /* Original signal */
+      sp=out+offset;
+      /* Excitation */
+      exc=st->exc+offset;
+
+      /* LSP interpolation (quantized and unquantized) */
+      lsp_interpolate(st->old_qlsp, qlsp, interp_qlsp, st->lpcSize, sub, st->nbSubframes);
+
+      /* Make sure the LSP's are stable */
+      lsp_enforce_margin(interp_qlsp, st->lpcSize, LSP_MARGIN);
+
+      /* Compute interpolated LPCs (unquantized) */
+      lsp_to_lpc(interp_qlsp, ak, st->lpcSize, stack);
+
+      /* Compute analysis filter at w=pi */
+      {
+         spx_word32_t pi_g=LPC_SCALING;
+         for (i=0;i<st->lpcSize;i+=2)
+         {
+            /*pi_g += -st->interp_qlpc[i] +  st->interp_qlpc[i+1];*/
+            pi_g = ADD32(pi_g, SUB32(EXTEND32(st->interp_qlpc[i+1]),EXTEND32(st->interp_qlpc[i])));
+         }
+         st->pi_gain[sub] = pi_g;
+      }
+      
+      iir_mem16(sp, st->interp_qlpc, sp, st->subframeSize, st->lpcSize, 
+                st->mem_sp, stack);
+      
+      for (i=0;i<st->lpcSize;i++)
+         st->interp_qlpc[i] = ak[i];
+
+   }
+
+   if (st->highpass_enabled)
+      highpass(out, out, st->frameSize, (st->isWideband?HIGHPASS_WIDEBAND:HIGHPASS_NARROWBAND)|HIGHPASS_OUTPUT, st->mem_hp);
+   /*for (i=0;i<st->frameSize;i++)
+     printf ("%d\n", (int)st->frame[i]);*/
+
+   /* Store the LSPs for interpolation in the next frame */
+   for (i=0;i<st->lpcSize;i++)
+      st->old_qlsp[i] = qlsp[i];
+
+   /* The next frame will not be the first (Duh!) */
+   st->first = 0;
+   st->count_lost=0;
+   st->last_pitch = best_pitch;
+#ifdef FIXED_POINT
+   st->last_pitch_gain = PSHR16(pitch_average,2);
+#else
+   st->last_pitch_gain = .25*pitch_average;   
+#endif
+   st->pitch_gain_buf[st->pitch_gain_buf_idx++] = st->last_pitch_gain;
+   if (st->pitch_gain_buf_idx > 2) /* rollover */
+      st->pitch_gain_buf_idx = 0;
+
+   st->last_ol_gain = ol_gain;
+
+   return 0;
+}
+
+int nb_encoder_ctl(void *state, int request, void *ptr)
+{
+   EncState *st;
+   st=(EncState*)state;     
+   switch(request)
+   {
+   case SPEEX_GET_FRAME_SIZE:
+      (*(spx_int32_t*)ptr) = st->frameSize;
+      break;
+   case SPEEX_SET_LOW_MODE:
+   case SPEEX_SET_MODE:
+      st->submodeSelect = st->submodeID = (*(spx_int32_t*)ptr);
+      break;
+   case SPEEX_GET_LOW_MODE:
+   case SPEEX_GET_MODE:
+      (*(spx_int32_t*)ptr) = st->submodeID;
+      break;
+   case SPEEX_SET_VBR:
+      st->vbr_enabled = (*(spx_int32_t*)ptr);
+      break;
+   case SPEEX_GET_VBR:
+      (*(spx_int32_t*)ptr) = st->vbr_enabled;
+      break;
+   case SPEEX_SET_VAD:
+      st->vad_enabled = (*(spx_int32_t*)ptr);
+      break;
+   case SPEEX_GET_VAD:
+      (*(spx_int32_t*)ptr) = st->vad_enabled;
+      break;
+   case SPEEX_SET_DTX:
+      st->dtx_enabled = (*(spx_int32_t*)ptr);
+      break;
+   case SPEEX_GET_DTX:
+      (*(spx_int32_t*)ptr) = st->dtx_enabled;
+      break;
+   case SPEEX_SET_ABR:
+      st->abr_enabled = (*(spx_int32_t*)ptr);
+      st->vbr_enabled = st->abr_enabled!=0;
+      if (st->vbr_enabled) 
+      {
+         spx_int32_t i=10;
+         spx_int32_t rate, target;
+         float vbr_qual;
+         target = (*(spx_int32_t*)ptr);
+         while (i>=0)
+         {
+            speex_encoder_ctl(st, SPEEX_SET_QUALITY, &i);
+            speex_encoder_ctl(st, SPEEX_GET_BITRATE, &rate);
+            if (rate <= target)
+               break;
+            i--;
+         }
+         vbr_qual=i;
+         if (vbr_qual<0)
+            vbr_qual=0;
+         speex_encoder_ctl(st, SPEEX_SET_VBR_QUALITY, &vbr_qual);
+         st->abr_count=0;
+         st->abr_drift=0;
+         st->abr_drift2=0;
+      }
+      
+      break;
+   case SPEEX_GET_ABR:
+      (*(spx_int32_t*)ptr) = st->abr_enabled;
+      break;
+   case SPEEX_SET_VBR_QUALITY:
+      st->vbr_quality = (*(float*)ptr);
+      break;
+   case SPEEX_GET_VBR_QUALITY:
+      (*(float*)ptr) = st->vbr_quality;
+      break;
+   case SPEEX_SET_QUALITY:
+      {
+         int quality = (*(spx_int32_t*)ptr);
+         if (quality < 0)
+            quality = 0;
+         if (quality > 10)
+            quality = 10;
+         st->submodeSelect = st->submodeID = ((const SpeexNBMode*)(st->mode->mode))->quality_map[quality];
+      }
+      break;
+   case SPEEX_SET_COMPLEXITY:
+      st->complexity = (*(spx_int32_t*)ptr);
+      if (st->complexity<0)
+         st->complexity=0;
+      break;
+   case SPEEX_GET_COMPLEXITY:
+      (*(spx_int32_t*)ptr) = st->complexity;
+      break;
+   case SPEEX_SET_BITRATE:
+      {
+         spx_int32_t i=10;
+         spx_int32_t rate, target;
+         target = (*(spx_int32_t*)ptr);
+         while (i>=0)
+         {
+            speex_encoder_ctl(st, SPEEX_SET_QUALITY, &i);
+            speex_encoder_ctl(st, SPEEX_GET_BITRATE, &rate);
+            if (rate <= target)
+               break;
+            i--;
+         }
+      }
+      break;
+   case SPEEX_GET_BITRATE:
+      if (st->submodes[st->submodeID])
+         (*(spx_int32_t*)ptr) = st->sampling_rate*SUBMODE(bits_per_frame)/st->frameSize;
+      else
+         (*(spx_int32_t*)ptr) = st->sampling_rate*(NB_SUBMODE_BITS+1)/st->frameSize;
+      break;
+   case SPEEX_SET_SAMPLING_RATE:
+      st->sampling_rate = (*(spx_int32_t*)ptr);
+      break;
+   case SPEEX_GET_SAMPLING_RATE:
+      (*(spx_int32_t*)ptr)=st->sampling_rate;
+      break;
+   case SPEEX_RESET_STATE:
+      {
+         int i;
+         st->bounded_pitch = 1;
+         st->first = 1;
+         for (i=0;i<st->lpcSize;i++)
+            st->old_lsp[i]=(M_PI*((float)(i+1)))/(st->lpcSize+1);
+         for (i=0;i<st->lpcSize;i++)
+            st->mem_sw[i]=st->mem_sw_whole[i]=st->mem_sp[i]=st->mem_exc[i]=0;
+         for (i=0;i<st->frameSize+st->max_pitch+1;i++)
+            st->excBuf[i]=st->swBuf[i]=0;
+         for (i=0;i<st->windowSize-st->frameSize;i++)
+            st->winBuf[i]=0;
+      }
+      break;
+   case SPEEX_SET_SUBMODE_ENCODING:
+      st->encode_submode = (*(spx_int32_t*)ptr);
+      break;
+   case SPEEX_GET_SUBMODE_ENCODING:
+      (*(spx_int32_t*)ptr) = st->encode_submode;
+      break;
+   case SPEEX_GET_LOOKAHEAD:
+      (*(spx_int32_t*)ptr)=(st->windowSize-st->frameSize);
+      break;
+   case SPEEX_SET_PLC_TUNING:
+      st->plc_tuning = (*(spx_int32_t*)ptr);
+      if (st->plc_tuning>100)
+         st->plc_tuning=100;
+      break;
+   case SPEEX_GET_PLC_TUNING:
+      (*(spx_int32_t*)ptr)=(st->plc_tuning);
+      break;
+   case SPEEX_SET_VBR_MAX_BITRATE:
+      st->vbr_max = (*(spx_int32_t*)ptr);
+      break;
+   case SPEEX_GET_VBR_MAX_BITRATE:
+      (*(spx_int32_t*)ptr) = st->vbr_max;
+      break;
+   case SPEEX_SET_HIGHPASS:
+      st->highpass_enabled = (*(spx_int32_t*)ptr);
+      break;
+   case SPEEX_GET_HIGHPASS:
+      (*(spx_int32_t*)ptr) = st->highpass_enabled;
+      break;
+
+   /* This is all internal stuff past this point */
+   case SPEEX_GET_PI_GAIN:
+      {
+         int i;
+         spx_word32_t *g = (spx_word32_t*)ptr;
+         for (i=0;i<st->nbSubframes;i++)
+            g[i]=st->pi_gain[i];
+      }
+      break;
+   case SPEEX_GET_EXC:
+      {
+         int i;
+         spx_word16_t *e = (spx_word16_t*)ptr;
+         for (i=0;i<st->frameSize;i++)
+            e[i]=st->exc[i];
+      }
+      break;
+   case SPEEX_GET_RELATIVE_QUALITY:
+      (*(float*)ptr)=st->relative_quality;
+      break;
+   case SPEEX_SET_INNOVATION_SAVE:
+      st->innov_save = (spx_sig_t*)ptr;
+      break;
+   case SPEEX_SET_WIDEBAND:
+      st->isWideband = *((spx_int32_t*)ptr);
+      break;
+   default:
+      speex_warning_int("Unknown nb_ctl request: ", request);
+      return -1;
+   }
+   return 0;
+}
+
+int nb_decoder_ctl(void *state, int request, void *ptr)
+{
+   DecState *st;
+   st=(DecState*)state;
+   switch(request)
+   {
+   case SPEEX_SET_LOW_MODE:
+   case SPEEX_SET_MODE:
+      st->submodeID = (*(spx_int32_t*)ptr);
+      break;
+   case SPEEX_GET_LOW_MODE:
+   case SPEEX_GET_MODE:
+      (*(spx_int32_t*)ptr) = st->submodeID;
+      break;
+   case SPEEX_SET_ENH:
+      st->lpc_enh_enabled = *((spx_int32_t*)ptr);
+      break;
+   case SPEEX_GET_ENH:
+      *((spx_int32_t*)ptr) = st->lpc_enh_enabled;
+      break;
+   case SPEEX_GET_FRAME_SIZE:
+      (*(spx_int32_t*)ptr) = st->frameSize;
+      break;
+   case SPEEX_GET_BITRATE:
+      if (st->submodes[st->submodeID])
+         (*(spx_int32_t*)ptr) = st->sampling_rate*SUBMODE(bits_per_frame)/st->frameSize;
+      else
+         (*(spx_int32_t*)ptr) = st->sampling_rate*(NB_SUBMODE_BITS+1)/st->frameSize;
+      break;
+   case SPEEX_SET_SAMPLING_RATE:
+      st->sampling_rate = (*(spx_int32_t*)ptr);
+      break;
+   case SPEEX_GET_SAMPLING_RATE:
+      (*(spx_int32_t*)ptr)=st->sampling_rate;
+      break;
+   case SPEEX_SET_HANDLER:
+      {
+         SpeexCallback *c = (SpeexCallback*)ptr;
+         st->speex_callbacks[c->callback_id].func=c->func;
+         st->speex_callbacks[c->callback_id].data=c->data;
+         st->speex_callbacks[c->callback_id].callback_id=c->callback_id;
+      }
+      break;
+   case SPEEX_SET_USER_HANDLER:
+      {
+         SpeexCallback *c = (SpeexCallback*)ptr;
+         st->user_callback.func=c->func;
+         st->user_callback.data=c->data;
+         st->user_callback.callback_id=c->callback_id;
+      }
+      break;
+   case SPEEX_RESET_STATE:
+      {
+         int i;
+         for (i=0;i<st->lpcSize;i++)
+            st->mem_sp[i]=0;
+         for (i=0;i<st->frameSize + st->max_pitch + 1;i++)
+            st->excBuf[i]=0;
+      }
+      break;
+   case SPEEX_SET_SUBMODE_ENCODING:
+      st->encode_submode = (*(spx_int32_t*)ptr);
+      break;
+   case SPEEX_GET_SUBMODE_ENCODING:
+      (*(spx_int32_t*)ptr) = st->encode_submode;
+      break;
+   case SPEEX_GET_LOOKAHEAD:
+      (*(spx_int32_t*)ptr)=st->subframeSize;
+      break;
+   case SPEEX_SET_HIGHPASS:
+      st->highpass_enabled = (*(spx_int32_t*)ptr);
+      break;
+   case SPEEX_GET_HIGHPASS:
+      (*(spx_int32_t*)ptr) = st->highpass_enabled;
+      break;
+
+   case SPEEX_GET_PI_GAIN:
+      {
+         int i;
+         spx_word32_t *g = (spx_word32_t*)ptr;
+         for (i=0;i<st->nbSubframes;i++)
+            g[i]=st->pi_gain[i];
+      }
+      break;
+   case SPEEX_GET_EXC:
+      {
+         int i;
+         spx_word16_t *e = (spx_word16_t*)ptr;
+         for (i=0;i<st->frameSize;i++)
+            e[i]=st->exc[i];
+      }
+      break;
+   case SPEEX_GET_DTX_STATUS:
+      *((spx_int32_t*)ptr) = st->dtx_enabled;
+      break;
+   case SPEEX_SET_INNOVATION_SAVE:
+      st->innov_save = (spx_sig_t*)ptr;
+      break;
+   case SPEEX_SET_WIDEBAND:
+      st->isWideband = *((spx_int32_t*)ptr);
+      break;
+   default:
+      speex_warning_int("Unknown nb_ctl request: ", request);
+      return -1;
+   }
+   return 0;
+}

Added: freeswitch/trunk/libs/speex/libspeex/nb_celp.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/nb_celp.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,205 @@
+/* Copyright (C) 2002-2006 Jean-Marc Valin */
+/**
+    @file nb_celp.h
+    @brief Narrowband CELP encoder/decoder
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifndef NB_CELP_H
+#define NB_CELP_H
+
+#include "modes.h"
+#include <speex/speex_bits.h>
+#include <speex/speex_callbacks.h>
+#include "vbr.h"
+#include "filters.h"
+
+#ifdef VORBIS_PSYCHO
+#include "vorbis_psy.h"
+#endif
+
+/**Structure representing the full state of the narrowband encoder*/
+typedef struct EncState {
+   const SpeexMode *mode;        /**< Mode corresponding to the state */
+   int    first;                 /**< Is this the first frame? */
+   int    frameSize;             /**< Size of frames */
+   int    subframeSize;          /**< Size of sub-frames */
+   int    nbSubframes;           /**< Number of sub-frames */
+   int    windowSize;            /**< Analysis (LPC) window length */
+   int    lpcSize;               /**< LPC order */
+   int    min_pitch;             /**< Minimum pitch value allowed */
+   int    max_pitch;             /**< Maximum pitch value allowed */
+
+   spx_word32_t cumul_gain;      /**< Product of previously used pitch gains (Q10) */
+   int    bounded_pitch;         /**< Next frame should not rely on previous frames for pitch */
+   int    ol_pitch;              /**< Open-loop pitch */
+   int    ol_voiced;             /**< Open-loop voiced/non-voiced decision */
+   int   *pitch;
+
+#ifdef EPIC_48K
+   int    lbr_48k;
+#endif
+
+#ifdef VORBIS_PSYCHO
+   VorbisPsy *psy;
+   float *psy_window;
+   float *curve;
+   float *old_curve;
+#endif
+
+   spx_word16_t  gamma1;         /**< Perceptual filter: A(z/gamma1) */
+   spx_word16_t  gamma2;         /**< Perceptual filter: A(z/gamma2) */
+   float  lag_factor;            /**< Lag windowing Gaussian width */
+   spx_word16_t  lpc_floor;      /**< Noise floor multiplier for A[0] in LPC analysis*/
+   char  *stack;                 /**< Pseudo-stack allocation for temporary memory */
+   spx_word16_t *winBuf;         /**< Input buffer (original signal) */
+   spx_word16_t *excBuf;         /**< Excitation buffer */
+   spx_word16_t *exc;            /**< Start of excitation frame */
+   spx_word16_t *swBuf;          /**< Weighted signal buffer */
+   spx_word16_t *sw;             /**< Start of weighted signal frame */
+   const spx_word16_t *window;   /**< Temporary (Hanning) window */
+   spx_word16_t *lagWindow;      /**< Window applied to auto-correlation */
+   spx_lsp_t *old_lsp;           /**< LSPs for previous frame */
+   spx_lsp_t *old_qlsp;          /**< Quantized LSPs for previous frame */
+   spx_mem_t *mem_sp;            /**< Filter memory for signal synthesis */
+   spx_mem_t *mem_sw;            /**< Filter memory for perceptually-weighted signal */
+   spx_mem_t *mem_sw_whole;      /**< Filter memory for perceptually-weighted signal (whole frame)*/
+   spx_mem_t *mem_exc;           /**< Filter memory for excitation (whole frame) */
+   spx_mem_t *mem_exc2;          /**< Filter memory for excitation (whole frame) */
+   spx_mem_t mem_hp[2];          /**< High-pass filter memory */
+   spx_word32_t *pi_gain;        /**< Gain of LPC filter at theta=pi (fe/2) */
+   spx_sig_t *innov_save;        /**< If non-NULL, innovation is copied here */
+         
+   VBRState *vbr;                /**< State of the VBR data */
+   float  vbr_quality;           /**< Quality setting for VBR encoding */
+   float  relative_quality;      /**< Relative quality that will be needed by VBR */
+   spx_int32_t vbr_enabled;      /**< 1 for enabling VBR, 0 otherwise */
+   spx_int32_t vbr_max;          /**< Max bit-rate allowed in VBR mode */
+   int    vad_enabled;           /**< 1 for enabling VAD, 0 otherwise */
+   int    dtx_enabled;           /**< 1 for enabling DTX, 0 otherwise */
+   int    dtx_count;             /**< Number of consecutive DTX frames */
+   spx_int32_t abr_enabled;      /**< ABR setting (in bps), 0 if off */
+   float  abr_drift;
+   float  abr_drift2;
+   float  abr_count;
+   int    complexity;            /**< Complexity setting (0-10 from least complex to most complex) */
+   spx_int32_t sampling_rate;
+   int    plc_tuning;
+   int    encode_submode;
+   const SpeexSubmode * const *submodes; /**< Sub-mode data */
+   int    submodeID;             /**< Activated sub-mode */
+   int    submodeSelect;         /**< Mode chosen by the user (may differ from submodeID if VAD is on) */
+   int    isWideband;            /**< Is this used as part of the embedded wideband codec */
+   int    highpass_enabled;        /**< Is the input filter enabled */
+} EncState;
+
+/**Structure representing the full state of the narrowband decoder*/
+typedef struct DecState {
+   const SpeexMode *mode;       /**< Mode corresponding to the state */
+   int    first;                /**< Is this the first frame? */
+   int    count_lost;           /**< Was the last frame lost? */
+   int    frameSize;            /**< Size of frames */
+   int    subframeSize;         /**< Size of sub-frames */
+   int    nbSubframes;          /**< Number of sub-frames */
+   int    lpcSize;              /**< LPC order */
+   int    min_pitch;            /**< Minimum pitch value allowed */
+   int    max_pitch;            /**< Maximum pitch value allowed */
+   spx_int32_t sampling_rate;
+
+#ifdef EPIC_48K
+   int    lbr_48k;
+#endif
+
+   spx_word16_t  last_ol_gain;  /**< Open-loop gain for previous frame */
+
+   char  *stack;                /**< Pseudo-stack allocation for temporary memory */
+   spx_word16_t *excBuf;        /**< Excitation buffer */
+   spx_word16_t *exc;           /**< Start of excitation frame */
+   spx_lsp_t *old_qlsp;         /**< Quantized LSPs for previous frame */
+   spx_coef_t *interp_qlpc;     /**< Interpolated quantized LPCs */
+   spx_mem_t *mem_sp;           /**< Filter memory for synthesis signal */
+   spx_mem_t mem_hp[2];         /**< High-pass filter memory */
+   spx_word32_t *pi_gain;       /**< Gain of LPC filter at theta=pi (fe/2) */
+   spx_sig_t *innov_save;       /** If non-NULL, innovation is copied here */
+   
+   /* This is used in packet loss concealment */
+   int    last_pitch;           /**< Pitch of last correctly decoded frame */
+   spx_word16_t  last_pitch_gain; /**< Pitch gain of last correctly decoded frame */
+   spx_word16_t  pitch_gain_buf[3]; /**< Pitch gain of last decoded frames */
+   int    pitch_gain_buf_idx;   /**< Tail of the buffer */
+   spx_int32_t seed;            /** Seed used for random number generation */
+   
+   int    encode_submode;
+   const SpeexSubmode * const *submodes; /**< Sub-mode data */
+   int    submodeID;            /**< Activated sub-mode */
+   int    lpc_enh_enabled;      /**< 1 when LPC enhancer is on, 0 otherwise */
+   SpeexCallback speex_callbacks[SPEEX_MAX_CALLBACKS];
+
+   SpeexCallback user_callback;
+
+   /*Vocoder data*/
+   spx_word16_t  voc_m1;
+   spx_word32_t  voc_m2;
+   float  voc_mean;
+   int    voc_offset;
+
+   int    dtx_enabled;
+   int    isWideband;            /**< Is this used as part of the embedded wideband codec */
+   int    highpass_enabled;        /**< Is the input filter enabled */
+} DecState;
+
+/** Initializes encoder state*/
+void *nb_encoder_init(const SpeexMode *m);
+
+/** De-allocates encoder state resources*/
+void nb_encoder_destroy(void *state);
+
+/** Encodes one frame*/
+int nb_encode(void *state, void *in, SpeexBits *bits);
+
+
+/** Initializes decoder state*/
+void *nb_decoder_init(const SpeexMode *m);
+
+/** De-allocates decoder state resources*/
+void nb_decoder_destroy(void *state);
+
+/** Decodes one frame*/
+int nb_decode(void *state, SpeexBits *bits, void *out);
+
+/** ioctl-like function for controlling a narrowband encoder */
+int nb_encoder_ctl(void *state, int request, void *ptr);
+
+/** ioctl-like function for controlling a narrowband decoder */
+int nb_decoder_ctl(void *state, int request, void *ptr);
+
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/preprocess.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/preprocess.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,1026 @@
+/* Copyright (C) 2003 Epic Games 
+   Written by Jean-Marc Valin
+
+   File: preprocess.c
+   Preprocessor with denoising based on the algorithm by Ephraim and Malah
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are
+   met:
+
+   1. Redistributions of source code must retain the above copyright notice,
+   this list of conditions and the following disclaimer.
+
+   2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   3. The name of the author may not be used to endorse or promote products
+   derived from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+   DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+   ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <math.h>
+#include "speex/speex_preprocess.h"
+#include "misc.h"
+#include "smallft.h"
+
+#define max(a,b) ((a) > (b) ? (a) : (b))
+#define min(a,b) ((a) < (b) ? (a) : (b))
+
+#ifndef M_PI
+#define M_PI 3.14159263
+#endif
+
+#define SQRT_M_PI_2 0.88623
+#define LOUDNESS_EXP 2.5
+
+#define NB_BANDS 8
+
+#define SPEEX_PROB_START_DEFAULT    0.35f
+#define SPEEX_PROB_CONTINUE_DEFAULT 0.20f
+
+#define ZMIN .1
+#define ZMAX .316
+#define ZMIN_1 10
+#define LOG_MIN_MAX_1 0.86859
+
+static void conj_window(float *w, int len)
+{
+   int i;
+   for (i=0;i<len;i++)
+   {
+      float x=4*((float)i)/len;
+      int inv=0;
+      if (x<1)
+      {
+      } else if (x<2)
+      {
+         x=2-x;
+         inv=1;
+      } else if (x<3)
+      {
+         x=x-2;
+         inv=1;
+      } else {
+         x=4-x;
+      }
+      x*=1.9979;
+      w[i]=(.5-.5*cos(x))*(.5-.5*cos(x));
+      if (inv)
+         w[i]=1-w[i];
+      w[i]=sqrt(w[i]);
+   }
+}
+
+/* This function approximates the gain function 
+   y = gamma(1.25)^2 * M(-.25;1;-x) / sqrt(x)  
+   which multiplied by xi/(1+xi) is the optimal gain
+   in the loudness domain ( sqrt[amplitude] )
+*/
+static inline float hypergeom_gain(float x)
+{
+   int ind;
+   float integer, frac;
+   static const float table[21] = {
+      0.82157f, 1.02017f, 1.20461f, 1.37534f, 1.53363f, 1.68092f, 1.81865f,
+      1.94811f, 2.07038f, 2.18638f, 2.29688f, 2.40255f, 2.50391f, 2.60144f,
+      2.69551f, 2.78647f, 2.87458f, 2.96015f, 3.04333f, 3.12431f, 3.20326f};
+      
+   integer = floor(2*x);
+   ind = (int)integer;
+   if (ind<0)
+      return 1;
+   if (ind>19)
+      return 1+.1296/x;
+   frac = 2*x-integer;
+   return ((1-frac)*table[ind] + frac*table[ind+1])/sqrt(x+.0001f);
+}
+
+static inline float qcurve(float x)
+{
+   return 1.f/(1.f+.1f/(x*x));
+}
+
+SpeexPreprocessState *speex_preprocess_state_init(int frame_size, int sampling_rate)
+{
+   int i;
+   int N, N3, N4;
+
+   SpeexPreprocessState *st = (SpeexPreprocessState *)speex_alloc(sizeof(SpeexPreprocessState));
+   st->frame_size = frame_size;
+
+   /* Round ps_size down to the nearest power of two */
+#if 0
+   i=1;
+   st->ps_size = st->frame_size;
+   while(1)
+   {
+      if (st->ps_size & ~i)
+      {
+         st->ps_size &= ~i;
+         i<<=1;
+      } else {
+         break;
+      }
+   }
+   
+   
+   if (st->ps_size < 3*st->frame_size/4)
+      st->ps_size = st->ps_size * 3 / 2;
+#else
+   st->ps_size = st->frame_size;
+#endif
+
+   N = st->ps_size;
+   N3 = 2*N - st->frame_size;
+   N4 = st->frame_size - N3;
+   
+   st->sampling_rate = sampling_rate;
+   st->denoise_enabled = 1;
+   st->agc_enabled = 0;
+   st->agc_level = 8000;
+   st->vad_enabled = 0;
+   st->dereverb_enabled = 0;
+   st->reverb_decay = .5;
+   st->reverb_level = .2;
+
+   st->speech_prob_start = SPEEX_PROB_START_DEFAULT;
+   st->speech_prob_continue = SPEEX_PROB_CONTINUE_DEFAULT;
+
+   st->frame = (float*)speex_alloc(2*N*sizeof(float));
+   st->ps = (float*)speex_alloc(N*sizeof(float));
+   st->gain2 = (float*)speex_alloc(N*sizeof(float));
+   st->window = (float*)speex_alloc(2*N*sizeof(float));
+   st->noise = (float*)speex_alloc(N*sizeof(float));
+   st->reverb_estimate = (float*)speex_alloc(N*sizeof(float));
+   st->old_ps = (float*)speex_alloc(N*sizeof(float));
+   st->gain = (float*)speex_alloc(N*sizeof(float));
+   st->prior = (float*)speex_alloc(N*sizeof(float));
+   st->post = (float*)speex_alloc(N*sizeof(float));
+   st->loudness_weight = (float*)speex_alloc(N*sizeof(float));
+   st->inbuf = (float*)speex_alloc(N3*sizeof(float));
+   st->outbuf = (float*)speex_alloc(N3*sizeof(float));
+   st->echo_noise = (float*)speex_alloc(N*sizeof(float));
+
+   st->S = (float*)speex_alloc(N*sizeof(float));
+   st->Smin = (float*)speex_alloc(N*sizeof(float));
+   st->Stmp = (float*)speex_alloc(N*sizeof(float));
+   st->update_prob = (float*)speex_alloc(N*sizeof(float));
+
+   st->zeta = (float*)speex_alloc(N*sizeof(float));
+   st->Zpeak = 0;
+   st->Zlast = 0;
+
+   st->noise_bands = (float*)speex_alloc(NB_BANDS*sizeof(float));
+   st->noise_bands2 = (float*)speex_alloc(NB_BANDS*sizeof(float));
+   st->speech_bands = (float*)speex_alloc(NB_BANDS*sizeof(float));
+   st->speech_bands2 = (float*)speex_alloc(NB_BANDS*sizeof(float));
+   st->noise_bandsN = st->speech_bandsN = 1;
+
+   conj_window(st->window, 2*N3);
+   for (i=2*N3;i<2*st->ps_size;i++)
+      st->window[i]=1;
+   
+   if (N4>0)
+   {
+      for (i=N3-1;i>=0;i--)
+      {
+         st->window[i+N3+N4]=st->window[i+N3];
+         st->window[i+N3]=1;
+      }
+   }
+   for (i=0;i<N;i++)
+   {
+      st->noise[i]=1e4;
+      st->reverb_estimate[i]=0.;
+      st->old_ps[i]=1e4;
+      st->gain[i]=1;
+      st->post[i]=1;
+      st->prior[i]=1;
+   }
+
+   for (i=0;i<N3;i++)
+   {
+      st->inbuf[i]=0;
+      st->outbuf[i]=0;
+   }
+
+   for (i=0;i<N;i++)
+   {
+      float ff=((float)i)*.5*sampling_rate/((float)N);
+      st->loudness_weight[i] = .35f-.35f*ff/16000.f+.73f*exp(-.5f*(ff-3800)*(ff-3800)/9e5f);
+      if (st->loudness_weight[i]<.01f)
+         st->loudness_weight[i]=.01f;
+      st->loudness_weight[i] *= st->loudness_weight[i];
+   }
+
+   st->speech_prob = 0;
+   st->last_speech = 1000;
+   st->loudness = pow(6000,LOUDNESS_EXP);
+   st->loudness2 = 6000;
+   st->nb_loudness_adapt = 0;
+
+   st->fft_lookup = (struct drft_lookup*)speex_alloc(sizeof(struct drft_lookup));
+   spx_drft_init(st->fft_lookup,2*N);
+
+   st->nb_adapt=0;
+   st->consec_noise=0;
+   st->nb_preprocess=0;
+   return st;
+}
+
+void speex_preprocess_state_destroy(SpeexPreprocessState *st)
+{
+   speex_free(st->frame);
+   speex_free(st->ps);
+   speex_free(st->gain2);
+   speex_free(st->window);
+   speex_free(st->noise);
+   speex_free(st->reverb_estimate);
+   speex_free(st->old_ps);
+   speex_free(st->gain);
+   speex_free(st->prior);
+   speex_free(st->post);
+   speex_free(st->loudness_weight);
+   speex_free(st->echo_noise);
+
+   speex_free(st->S);
+   speex_free(st->Smin);
+   speex_free(st->Stmp);
+   speex_free(st->update_prob);
+   speex_free(st->zeta);
+
+   speex_free(st->noise_bands);
+   speex_free(st->noise_bands2);
+   speex_free(st->speech_bands);
+   speex_free(st->speech_bands2);
+
+   speex_free(st->inbuf);
+   speex_free(st->outbuf);
+
+   spx_drft_clear(st->fft_lookup);
+   speex_free(st->fft_lookup);
+
+   speex_free(st);
+}
+
+static void update_noise(SpeexPreprocessState *st, float *ps, spx_int32_t *echo)
+{
+   int i;
+   float beta;
+   st->nb_adapt++;
+   beta=1.0f/st->nb_adapt;
+   if (beta < .05f)
+      beta=.05f;
+   
+   if (!echo)
+   {
+      for (i=0;i<st->ps_size;i++)
+         st->noise[i] = (1.f-beta)*st->noise[i] + beta*ps[i];
+   } else {
+      for (i=0;i<st->ps_size;i++)
+         st->noise[i] = (1.f-beta)*st->noise[i] + beta*max(1.f,ps[i]-st->frame_size*st->frame_size*1.0*echo[i]); 
+#if 0
+      for (i=0;i<st->ps_size;i++)
+         st->noise[i] = 0;
+#endif
+   }
+}
+
+static int speex_compute_vad(SpeexPreprocessState *st, float *ps, float mean_prior, float mean_post)
+{
+   int i, is_speech=0;
+   int N = st->ps_size;
+   float scale=.5f/N;
+
+   /* FIXME: Clean this up a bit */
+   {
+      float bands[NB_BANDS];
+      int j;
+      float p0, p1;
+      float tot_loudness=0;
+      float x = sqrt(mean_post);
+
+      for (i=5;i<N-10;i++)
+      {
+         tot_loudness += scale*st->ps[i] * st->loudness_weight[i];
+      }
+
+      for (i=0;i<NB_BANDS;i++)
+      {
+         bands[i]=1e4f;
+         for (j=i*N/NB_BANDS;j<(i+1)*N/NB_BANDS;j++)
+         {
+            bands[i] += ps[j];
+         }
+         bands[i]=log(bands[i]);
+      }
+      
+      /*p1 = .0005+.6*exp(-.5*(x-.4)*(x-.4)*11)+.1*exp(-1.2*x);
+      if (x<1.5)
+         p0=.1*exp(2*(x-1.5));
+      else
+         p0=.02+.1*exp(-.2*(x-1.5));
+      */
+
+      p0=1.f/(1.f+exp(3.f*(1.5f-x)));
+      p1=1.f-p0;
+
+      /*fprintf (stderr, "%f %f ", p0, p1);*/
+      /*p0 *= .99*st->speech_prob + .01*(1-st->speech_prob);
+      p1 *= .01*st->speech_prob + .99*(1-st->speech_prob);
+      
+      st->speech_prob = p0/(p1+p0);
+      */
+
+      if (st->noise_bandsN < 50 || st->speech_bandsN < 50)
+      {
+         if (mean_post > 5.f)
+         {
+            float adapt = 1./st->speech_bandsN++;
+            if (adapt<.005f)
+               adapt = .005f;
+            for (i=0;i<NB_BANDS;i++)
+            {
+               st->speech_bands[i] = (1.f-adapt)*st->speech_bands[i] + adapt*bands[i];
+               /*st->speech_bands2[i] = (1-adapt)*st->speech_bands2[i] + adapt*bands[i]*bands[i];*/
+               st->speech_bands2[i] = (1.f-adapt)*st->speech_bands2[i] + adapt*(bands[i]-st->speech_bands[i])*(bands[i]-st->speech_bands[i]);
+            }
+         } else {
+            float adapt = 1./st->noise_bandsN++;
+            if (adapt<.005f)
+               adapt = .005f;
+            for (i=0;i<NB_BANDS;i++)
+            {
+               st->noise_bands[i] = (1.f-adapt)*st->noise_bands[i] + adapt*bands[i];
+               /*st->noise_bands2[i] = (1-adapt)*st->noise_bands2[i] + adapt*bands[i]*bands[i];*/
+               st->noise_bands2[i] = (1.f-adapt)*st->noise_bands2[i] + adapt*(bands[i]-st->noise_bands[i])*(bands[i]-st->noise_bands[i]);
+            }
+         }
+      }
+      p0=p1=1;
+      for (i=0;i<NB_BANDS;i++)
+      {
+         float noise_var, speech_var;
+         float noise_mean, speech_mean;
+         float tmp1, tmp2, pr;
+
+         /*noise_var = 1.01*st->noise_bands2[i] - st->noise_bands[i]*st->noise_bands[i];
+           speech_var = 1.01*st->speech_bands2[i] - st->speech_bands[i]*st->speech_bands[i];*/
+         noise_var = st->noise_bands2[i];
+         speech_var = st->speech_bands2[i];
+         if (noise_var < .1f)
+            noise_var = .1f;
+         if (speech_var < .1f)
+            speech_var = .1f;
+         
+         /*speech_var = sqrt(speech_var*noise_var);
+           noise_var = speech_var;*/
+         if (noise_var < .05f*speech_var)
+            noise_var = .05f*speech_var; 
+         if (speech_var < .05f*noise_var)
+            speech_var = .05f*noise_var;
+         
+         if (bands[i] < st->noise_bands[i])
+            speech_var = noise_var;
+         if (bands[i] > st->speech_bands[i])
+            noise_var = speech_var;
+
+         speech_mean = st->speech_bands[i];
+         noise_mean = st->noise_bands[i];
+         if (noise_mean < speech_mean - 5.f)
+            noise_mean = speech_mean - 5.f;
+
+         tmp1 = exp(-.5f*(bands[i]-speech_mean)*(bands[i]-speech_mean)/speech_var)/sqrt(2.f*M_PI*speech_var);
+         tmp2 = exp(-.5f*(bands[i]-noise_mean)*(bands[i]-noise_mean)/noise_var)/sqrt(2.f*M_PI*noise_var);
+         /*fprintf (stderr, "%f ", (float)(p0/(.01+p0+p1)));*/
+         /*fprintf (stderr, "%f ", (float)(bands[i]));*/
+         pr = tmp1/(1e-25+tmp1+tmp2);
+         /*if (bands[i] < st->noise_bands[i])
+            pr=.01;
+         if (bands[i] > st->speech_bands[i] && pr < .995)
+         pr=.995;*/
+         if (pr>.999f)
+            pr=.999f;
+         if (pr<.001f)
+            pr=.001f;
+         /*fprintf (stderr, "%f ", pr);*/
+         p0 *= pr;
+         p1 *= (1-pr);
+      }
+
+      p0 = pow(p0,.2);
+      p1 = pow(p1,.2);      
+      
+#if 1
+      p0 *= 2.f;
+      p0=p0/(p1+p0);
+      if (st->last_speech>20) 
+      {
+         float tmp = sqrt(tot_loudness)/st->loudness2;
+         tmp = 1.f-exp(-10.f*tmp);
+         if (p0>tmp)
+            p0=tmp;
+      }
+      p1=1-p0;
+#else
+      if (sqrt(tot_loudness) < .6f*st->loudness2 && p0>15.f*p1)
+         p0=15.f*p1;
+      if (sqrt(tot_loudness) < .45f*st->loudness2 && p0>7.f*p1)
+         p0=7.f*p1;
+      if (sqrt(tot_loudness) < .3f*st->loudness2 && p0>3.f*p1)
+         p0=3.f*p1;
+      if (sqrt(tot_loudness) < .15f*st->loudness2 && p0>p1)
+         p0=p1;
+      /*fprintf (stderr, "%f %f ", (float)(sqrt(tot_loudness) /( .25*st->loudness2)), p0/(p1+p0));*/
+#endif
+
+      p0 *= .99f*st->speech_prob + .01f*(1-st->speech_prob);
+      p1 *= .01f*st->speech_prob + .99f*(1-st->speech_prob);
+      
+      st->speech_prob = p0/(1e-25f+p1+p0);
+      /*fprintf (stderr, "%f %f %f ", tot_loudness, st->loudness2, st->speech_prob);*/
+
+      if (st->speech_prob > st->speech_prob_start
+         || (st->last_speech < 20 && st->speech_prob > st->speech_prob_continue))
+      {
+         is_speech = 1;
+         st->last_speech = 0;
+      } else {
+         st->last_speech++;
+         if (st->last_speech<20)
+           is_speech = 1;
+      }
+
+      if (st->noise_bandsN > 50 && st->speech_bandsN > 50)
+      {
+         if (mean_post > 5)
+         {
+            float adapt = 1./st->speech_bandsN++;
+            if (adapt<.005f)
+               adapt = .005f;
+            for (i=0;i<NB_BANDS;i++)
+            {
+               st->speech_bands[i] = (1-adapt)*st->speech_bands[i] + adapt*bands[i];
+               /*st->speech_bands2[i] = (1-adapt)*st->speech_bands2[i] + adapt*bands[i]*bands[i];*/
+               st->speech_bands2[i] = (1-adapt)*st->speech_bands2[i] + adapt*(bands[i]-st->speech_bands[i])*(bands[i]-st->speech_bands[i]);
+            }
+         } else {
+            float adapt = 1./st->noise_bandsN++;
+            if (adapt<.005f)
+               adapt = .005f;
+            for (i=0;i<NB_BANDS;i++)
+            {
+               st->noise_bands[i] = (1-adapt)*st->noise_bands[i] + adapt*bands[i];
+               /*st->noise_bands2[i] = (1-adapt)*st->noise_bands2[i] + adapt*bands[i]*bands[i];*/
+               st->noise_bands2[i] = (1-adapt)*st->noise_bands2[i] + adapt*(bands[i]-st->noise_bands[i])*(bands[i]-st->noise_bands[i]);
+            }
+         }
+      }
+
+
+   }
+
+   return is_speech;
+}
+
+static void speex_compute_agc(SpeexPreprocessState *st, float mean_prior)
+{
+   int i;
+   int N = st->ps_size;
+   float scale=.5f/N;
+   float agc_gain;
+   int freq_start, freq_end;
+   float active_bands = 0;
+
+   freq_start = (int)(300.0f*2*N/st->sampling_rate);
+   freq_end   = (int)(2000.0f*2*N/st->sampling_rate);
+   for (i=freq_start;i<freq_end;i++)
+   {
+      if (st->S[i] > 20.f*st->Smin[i]+1000.f)
+         active_bands+=1;
+   }
+   active_bands /= (freq_end-freq_start+1);
+
+   if (active_bands > .2f)
+   {
+      float loudness=0.f;
+      float rate, rate2=.2f;
+      st->nb_loudness_adapt++;
+      rate=2.0f/(1+st->nb_loudness_adapt);
+      if (rate < .05f)
+         rate = .05f;
+      if (rate < .1f && pow(loudness, LOUDNESS_EXP) > st->loudness)
+         rate = .1f;
+      if (rate < .2f && pow(loudness, LOUDNESS_EXP) > 3.f*st->loudness)
+         rate = .2f;
+      if (rate < .4f && pow(loudness, LOUDNESS_EXP) > 10.f*st->loudness)
+         rate = .4f;
+
+      for (i=2;i<N;i++)
+      {
+         loudness += scale*st->ps[i] * st->gain2[i] * st->gain2[i] * st->loudness_weight[i];
+      }
+      loudness=sqrt(loudness);
+      /*if (loudness < 2*pow(st->loudness, 1.0/LOUDNESS_EXP) &&
+        loudness*2 > pow(st->loudness, 1.0/LOUDNESS_EXP))*/
+      st->loudness = (1-rate)*st->loudness + (rate)*pow(loudness, LOUDNESS_EXP);
+      
+      st->loudness2 = (1-rate2)*st->loudness2 + rate2*pow(st->loudness, 1.0f/LOUDNESS_EXP);
+
+      loudness = pow(st->loudness, 1.0f/LOUDNESS_EXP);
+
+      /*fprintf (stderr, "%f %f %f\n", loudness, st->loudness2, rate);*/
+   }
+   
+   agc_gain = st->agc_level/st->loudness2;
+   /*fprintf (stderr, "%f %f %f %f\n", active_bands, st->loudness, st->loudness2, agc_gain);*/
+   if (agc_gain>200)
+      agc_gain = 200;
+
+   for (i=0;i<N;i++)
+      st->gain2[i] *= agc_gain;
+   
+}
+
+static void preprocess_analysis(SpeexPreprocessState *st, spx_int16_t *x)
+{
+   int i;
+   int N = st->ps_size;
+   int N3 = 2*N - st->frame_size;
+   int N4 = st->frame_size - N3;
+   float *ps=st->ps;
+
+   /* 'Build' input frame */
+   for (i=0;i<N3;i++)
+      st->frame[i]=st->inbuf[i];
+   for (i=0;i<st->frame_size;i++)
+      st->frame[N3+i]=x[i];
+   
+   /* Update inbuf */
+   for (i=0;i<N3;i++)
+      st->inbuf[i]=x[N4+i];
+
+   /* Windowing */
+   for (i=0;i<2*N;i++)
+      st->frame[i] *= st->window[i];
+
+   /* Perform FFT */
+   spx_drft_forward(st->fft_lookup, st->frame);
+
+   /* Power spectrum */
+   ps[0]=1;
+   for (i=1;i<N;i++)
+      ps[i]=1+st->frame[2*i-1]*st->frame[2*i-1] + st->frame[2*i]*st->frame[2*i];
+
+}
+
+static void update_noise_prob(SpeexPreprocessState *st)
+{
+   int i;
+   int N = st->ps_size;
+
+   for (i=1;i<N-1;i++)
+      st->S[i] = 100.f+ .8f*st->S[i] + .05f*st->ps[i-1]+.1f*st->ps[i]+.05f*st->ps[i+1];
+   
+   if (st->nb_preprocess<1)
+   {
+      for (i=1;i<N-1;i++)
+         st->Smin[i] = st->Stmp[i] = st->S[i]+100.f;
+   }
+
+   if (st->nb_preprocess%200==0)
+   {
+      for (i=1;i<N-1;i++)
+      {
+         st->Smin[i] = min(st->Stmp[i], st->S[i]);
+         st->Stmp[i] = st->S[i];
+      }
+   } else {
+      for (i=1;i<N-1;i++)
+      {
+         st->Smin[i] = min(st->Smin[i], st->S[i]);
+         st->Stmp[i] = min(st->Stmp[i], st->S[i]);      
+      }
+   }
+   for (i=1;i<N-1;i++)
+   {
+      st->update_prob[i] *= .2f;
+      if (st->S[i] > 2.5*st->Smin[i])
+         st->update_prob[i] += .8f;
+      /*fprintf (stderr, "%f ", st->S[i]/st->Smin[i]);*/
+      /*fprintf (stderr, "%f ", st->update_prob[i]);*/
+   }
+
+}
+
+#define NOISE_OVERCOMPENS 1.4
+
+int speex_preprocess(SpeexPreprocessState *st, spx_int16_t *x, spx_int32_t *echo)
+{
+   int i;
+   int is_speech=1;
+   float mean_post=0;
+   float mean_prior=0;
+   int N = st->ps_size;
+   int N3 = 2*N - st->frame_size;
+   int N4 = st->frame_size - N3;
+   float scale=.5f/N;
+   float *ps=st->ps;
+   float Zframe=0, Pframe;
+
+   preprocess_analysis(st, x);
+
+   update_noise_prob(st);
+
+   st->nb_preprocess++;
+
+   /* Noise estimation always updated for the 20 first times */
+   if (st->nb_adapt<10)
+   {
+      update_noise(st, ps, echo);
+   }
+
+   /* Deal with residual echo if provided */
+   if (echo)
+      for (i=1;i<N;i++)
+         st->echo_noise[i] = (.3f*st->echo_noise[i] + st->frame_size*st->frame_size*1.0*echo[i]);
+
+   /* Compute a posteriori SNR */
+   for (i=1;i<N;i++)
+   {
+      float tot_noise = 1.f+ NOISE_OVERCOMPENS*st->noise[i] + st->echo_noise[i] + st->reverb_estimate[i];
+      st->post[i] = ps[i]/tot_noise - 1.f;
+      if (st->post[i]>100.f)
+         st->post[i]=100.f;
+      /*if (st->post[i]<0)
+        st->post[i]=0;*/
+      mean_post+=st->post[i];
+   }
+   mean_post /= N;
+   if (mean_post<0.f)
+      mean_post=0.f;
+
+   /* Special case for first frame */
+   if (st->nb_adapt==1)
+      for (i=1;i<N;i++)
+         st->old_ps[i] = ps[i];
+
+   /* Compute a priori SNR */
+   {
+      /* A priori update rate */
+      for (i=1;i<N;i++)
+      {
+         float gamma = .15+.85*st->prior[i]*st->prior[i]/((1+st->prior[i])*(1+st->prior[i]));
+         float tot_noise = 1.f+ NOISE_OVERCOMPENS*st->noise[i] + st->echo_noise[i] + st->reverb_estimate[i];
+         /* A priori SNR update */
+         st->prior[i] = gamma*max(0.0f,st->post[i]) +
+               (1.f-gamma)* (.8*st->gain[i]*st->gain[i]*st->old_ps[i]/tot_noise + .2*st->prior[i]);
+         
+         if (st->prior[i]>100.f)
+            st->prior[i]=100.f;
+         
+         mean_prior+=st->prior[i];
+      }
+   }
+   mean_prior /= N;
+
+#if 0
+   for (i=0;i<N;i++)
+   {
+      fprintf (stderr, "%f ", st->prior[i]);
+   }
+   fprintf (stderr, "\n");
+#endif
+   /*fprintf (stderr, "%f %f\n", mean_prior,mean_post);*/
+
+   if (st->nb_preprocess>=20)
+   {
+      int do_update = 0;
+      float noise_ener=0, sig_ener=0;
+      /* If SNR is low (both a priori and a posteriori), update the noise estimate*/
+      /*if (mean_prior<.23 && mean_post < .5)*/
+      if (mean_prior<.23f && mean_post < .5f)
+         do_update = 1;
+      for (i=1;i<N;i++)
+      {
+         noise_ener += st->noise[i];
+         sig_ener += ps[i];
+      }
+      if (noise_ener > 3.f*sig_ener)
+         do_update = 1;
+      /*do_update = 0;*/
+      if (do_update)
+      {
+         st->consec_noise++;
+      } else {
+         st->consec_noise=0;
+      }
+   }
+
+   if (st->vad_enabled)
+      is_speech = speex_compute_vad(st, ps, mean_prior, mean_post);
+
+
+   if (st->consec_noise>=3)
+   {
+      update_noise(st, st->old_ps, echo);
+   } else {
+      for (i=1;i<N-1;i++)
+      {
+         if (st->update_prob[i]<.5f/* || st->ps[i] < st->noise[i]*/)
+         {
+            if (echo)
+               st->noise[i] = .95f*st->noise[i] + .05f*max(1.0f,st->ps[i]-st->frame_size*st->frame_size*1.0*echo[i]);
+            else
+               st->noise[i] = .95f*st->noise[i] + .05f*st->ps[i];
+         }
+      }
+   }
+
+   for (i=1;i<N;i++)
+   {
+      st->zeta[i] = .7f*st->zeta[i] + .3f*st->prior[i];
+   }
+
+   {
+      int freq_start = (int)(300.0f*2.f*N/st->sampling_rate);
+      int freq_end   = (int)(2000.0f*2.f*N/st->sampling_rate);
+      for (i=freq_start;i<freq_end;i++)
+      {
+         Zframe += st->zeta[i];         
+      }
+      Zframe /= (freq_end-freq_start);
+   }
+   st->Zlast = Zframe;
+
+   Pframe = qcurve(Zframe);
+
+   /*fprintf (stderr, "%f\n", Pframe);*/
+   /* Compute gain according to the Ephraim-Malah algorithm */
+   for (i=1;i<N;i++)
+   {
+      float MM;
+      float theta;
+      float prior_ratio;
+      float p, q;
+      float zeta1;
+      float P1;
+
+      prior_ratio = st->prior[i]/(1.0001f+st->prior[i]);
+      theta = (1.f+st->post[i])*prior_ratio;
+
+      if (i==1 || i==N-1)
+         zeta1 = st->zeta[i];
+      else
+         zeta1 = .25f*st->zeta[i-1] + .5f*st->zeta[i] + .25f*st->zeta[i+1];
+      P1 = qcurve (zeta1);
+      
+      /* FIXME: add global prob (P2) */
+      q = 1-Pframe*P1;
+      q = 1-P1;
+      if (q>.95f)
+         q=.95f;
+      p=1.f/(1.f + (q/(1.f-q))*(1.f+st->prior[i])*exp(-theta));
+      /*p=1;*/
+
+      /* Optimal estimator for loudness domain */
+      MM = hypergeom_gain(theta);
+
+      st->gain[i] = prior_ratio * MM;
+      /*Put some (very arbitraty) limit on the gain*/
+      if (st->gain[i]>2.f)
+      {
+         st->gain[i]=2.f;
+      }
+      
+      st->reverb_estimate[i] = st->reverb_decay*st->reverb_estimate[i] + st->reverb_decay*st->reverb_level*st->gain[i]*st->gain[i]*st->ps[i];
+      if (st->denoise_enabled)
+      {
+         /*st->gain2[i] = p*p*st->gain[i];*/
+         st->gain2[i]=(p*sqrt(st->gain[i])+.2*(1-p)) * (p*sqrt(st->gain[i])+.2*(1-p));
+         /*st->gain2[i] = pow(st->gain[i], p) * pow(.1f,1.f-p);*/
+      } else {
+         st->gain2[i]=1.f;
+      }
+   }
+   
+   st->gain2[0]=st->gain[0]=0.f;
+   st->gain2[N-1]=st->gain[N-1]=0.f;
+   /*
+   for (i=30;i<N-2;i++)
+   {
+      st->gain[i] = st->gain2[i]*st->gain2[i] + (1-st->gain2[i])*.333*(.6*st->gain2[i-1]+st->gain2[i]+.6*st->gain2[i+1]+.4*st->gain2[i-2]+.4*st->gain2[i+2]);
+   }
+   for (i=30;i<N-2;i++)
+      st->gain2[i] = st->gain[i];
+   */
+   if (st->agc_enabled)
+      speex_compute_agc(st, mean_prior);
+
+#if 0
+   if (!is_speech)
+   {
+      for (i=0;i<N;i++)
+         st->gain2[i] = 0;
+   }
+#if 0
+ else {
+      for (i=0;i<N;i++)
+         st->gain2[i] = 1;
+   }
+#endif
+#endif
+
+   /* Apply computed gain */
+   for (i=1;i<N;i++)
+   {
+      st->frame[2*i-1] *= st->gain2[i];
+      st->frame[2*i] *= st->gain2[i];
+   }
+
+   /* Get rid of the DC and very low frequencies */
+   st->frame[0]=0;
+   st->frame[1]=0;
+   st->frame[2]=0;
+   /* Nyquist frequency is mostly useless too */
+   st->frame[2*N-1]=0;
+
+   /* Inverse FFT with 1/N scaling */
+   spx_drft_backward(st->fft_lookup, st->frame);
+
+   for (i=0;i<2*N;i++)
+      st->frame[i] *= scale;
+
+   {
+      float max_sample=0;
+      for (i=0;i<2*N;i++)
+         if (fabs(st->frame[i])>max_sample)
+            max_sample = fabs(st->frame[i]);
+      if (max_sample>28000.f)
+      {
+         float damp = 28000.f/max_sample;
+         for (i=0;i<2*N;i++)
+            st->frame[i] *= damp;
+      }
+   }
+
+   for (i=0;i<2*N;i++)
+      st->frame[i] *= st->window[i];
+
+   /* Perform overlap and add */
+   for (i=0;i<N3;i++)
+      x[i] = st->outbuf[i] + st->frame[i];
+   for (i=0;i<N4;i++)
+      x[N3+i] = st->frame[N3+i];
+   
+   /* Update outbuf */
+   for (i=0;i<N3;i++)
+      st->outbuf[i] = st->frame[st->frame_size+i];
+
+   /* Save old power spectrum */
+   for (i=1;i<N;i++)
+      st->old_ps[i] = ps[i];
+
+   return is_speech;
+}
+
+void speex_preprocess_estimate_update(SpeexPreprocessState *st, spx_int16_t *x, spx_int32_t *echo)
+{
+   int i;
+   int N = st->ps_size;
+   int N3 = 2*N - st->frame_size;
+
+   float *ps=st->ps;
+
+   preprocess_analysis(st, x);
+
+   update_noise_prob(st);
+
+   st->nb_preprocess++;
+   
+   for (i=1;i<N-1;i++)
+   {
+      if (st->update_prob[i]<.5f || st->ps[i] < st->noise[i])
+      {
+         if (echo)
+            st->noise[i] = .95f*st->noise[i] + .1f*max(1.0f,st->ps[i]-st->frame_size*st->frame_size*1.0*echo[i]);
+         else
+            st->noise[i] = .95f*st->noise[i] + .1f*st->ps[i];
+      }
+   }
+
+   for (i=0;i<N3;i++)
+      st->outbuf[i] = x[st->frame_size-N3+i]*st->window[st->frame_size+i];
+
+   /* Save old power spectrum */
+   for (i=1;i<N;i++)
+      st->old_ps[i] = ps[i];
+
+   for (i=1;i<N;i++)
+      st->reverb_estimate[i] *= st->reverb_decay;
+}
+
+
+int speex_preprocess_ctl(SpeexPreprocessState *state, int request, void *ptr)
+{
+   int i;
+   SpeexPreprocessState *st;
+   st=(SpeexPreprocessState*)state;
+   switch(request)
+   {
+   case SPEEX_PREPROCESS_SET_DENOISE:
+      st->denoise_enabled = (*(int*)ptr);
+      break;
+   case SPEEX_PREPROCESS_GET_DENOISE:
+      (*(int*)ptr) = st->denoise_enabled;
+      break;
+
+   case SPEEX_PREPROCESS_SET_AGC:
+      st->agc_enabled = (*(int*)ptr);
+      break;
+   case SPEEX_PREPROCESS_GET_AGC:
+      (*(int*)ptr) = st->agc_enabled;
+      break;
+
+   case SPEEX_PREPROCESS_SET_AGC_LEVEL:
+      st->agc_level = (*(float*)ptr);
+      if (st->agc_level<1)
+         st->agc_level=1;
+      if (st->agc_level>32768)
+         st->agc_level=32768;
+      break;
+   case SPEEX_PREPROCESS_GET_AGC_LEVEL:
+      (*(float*)ptr) = st->agc_level;
+      break;
+
+   case SPEEX_PREPROCESS_SET_VAD:
+      st->vad_enabled = (*(int*)ptr);
+      break;
+   case SPEEX_PREPROCESS_GET_VAD:
+      (*(int*)ptr) = st->vad_enabled;
+      break;
+   
+   case SPEEX_PREPROCESS_SET_DEREVERB:
+      st->dereverb_enabled = (*(int*)ptr);
+      for (i=0;i<st->ps_size;i++)
+         st->reverb_estimate[i]=0;
+      break;
+   case SPEEX_PREPROCESS_GET_DEREVERB:
+      (*(int*)ptr) = st->dereverb_enabled;
+      break;
+
+   case SPEEX_PREPROCESS_SET_DEREVERB_LEVEL:
+      st->reverb_level = (*(float*)ptr);
+      break;
+   case SPEEX_PREPROCESS_GET_DEREVERB_LEVEL:
+      (*(float*)ptr) = st->reverb_level;
+      break;
+   
+   case SPEEX_PREPROCESS_SET_DEREVERB_DECAY:
+      st->reverb_decay = (*(float*)ptr);
+      break;
+   case SPEEX_PREPROCESS_GET_DEREVERB_DECAY:
+      (*(float*)ptr) = st->reverb_decay;
+      break;
+
+   case SPEEX_PREPROCESS_SET_PROB_START:
+      st->speech_prob_start = (*(int*)ptr) / 100.0;
+      if ( st->speech_prob_start > 1 || st->speech_prob_start < 0 )
+         st->speech_prob_start = SPEEX_PROB_START_DEFAULT;
+      break;
+   case SPEEX_PREPROCESS_GET_PROB_START:
+      (*(int*)ptr) = st->speech_prob_start * 100;
+      break;
+
+   case SPEEX_PREPROCESS_SET_PROB_CONTINUE:
+      st->speech_prob_continue = (*(int*)ptr) / 100.0;
+      if ( st->speech_prob_continue > 1 || st->speech_prob_continue < 0 )
+         st->speech_prob_continue = SPEEX_PROB_CONTINUE_DEFAULT;
+      break;
+   case SPEEX_PREPROCESS_GET_PROB_CONTINUE:
+      (*(int*)ptr) = st->speech_prob_continue * 100;
+      break;
+
+      default:
+      speex_warning_int("Unknown speex_preprocess_ctl request: ", request);
+      return -1;
+   }
+   return 0;
+}

Added: freeswitch/trunk/libs/speex/libspeex/pseudofloat.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/pseudofloat.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,387 @@
+/* Copyright (C) 2005 Jean-Marc Valin */
+/**
+   @file pseudofloat.h
+   @brief Pseudo-floating point
+ */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef PSEUDOFLOAT_H
+#define PSEUDOFLOAT_H
+
+#include "misc.h"
+#include "math_approx.h"
+#include <math.h>
+
+#ifdef FIXED_POINT
+
+typedef struct {
+   spx_int16_t m;
+   spx_int16_t e;
+} spx_float_t;
+
+static const spx_float_t FLOAT_ZERO = {0,0};
+static const spx_float_t FLOAT_ONE = {16384,-14};
+static const spx_float_t FLOAT_HALF = {16384,-15};
+
+#define MIN(a,b) ((a)<(b)?(a):(b))
+static inline spx_float_t PSEUDOFLOAT(spx_int32_t x)
+{
+   int e=0;
+   int sign=0;
+   if (x<0)
+   {
+      sign = 1;
+      x = -x;
+   }
+   if (x==0)
+   {
+      spx_float_t r = {0,0};
+      return r;
+   }
+   while (x>32767)
+   {
+      x >>= 1;
+      /*x *= .5;*/
+      e++;
+   }
+   while (x<16383)
+   {
+      x <<= 1;
+      /*x *= 2;*/
+      e--;
+   }
+   if (sign)
+   {
+      spx_float_t r;
+      r.m = -x;
+      r.e = e;
+      return r;
+   }
+   else      
+   {
+      spx_float_t r;
+      r.m = x;
+      r.e = e;
+      return r;
+   }
+}
+
+
+static inline spx_float_t FLOAT_ADD(spx_float_t a, spx_float_t b)
+{
+   spx_float_t r;
+   if (a.m==0)
+      return b;
+   else if (b.m==0)
+      return a;
+   if ((a).e > (b).e) 
+   {
+      r.m = ((a).m>>1) + ((b).m>>MIN(15,(a).e-(b).e+1));
+      r.e = (a).e+1;
+   }
+   else 
+   {
+      r.m = ((b).m>>1) + ((a).m>>MIN(15,(b).e-(a).e+1));
+      r.e = (b).e+1;
+   }
+   if (r.m>0)
+   {
+      if (r.m<16384)
+      {
+         r.m<<=1;
+         r.e-=1;
+      }
+   } else {
+      if (r.m>-16384)
+      {
+         r.m<<=1;
+         r.e-=1;
+      }
+   }
+   /*printf ("%f + %f = %f\n", REALFLOAT(a), REALFLOAT(b), REALFLOAT(r));*/
+   return r;
+}
+
+static inline spx_float_t FLOAT_SUB(spx_float_t a, spx_float_t b)
+{
+   spx_float_t r;
+   if (a.m==0)
+      return b;
+   else if (b.m==0)
+      return a;
+   if ((a).e > (b).e)
+   {
+      r.m = ((a).m>>1) - ((b).m>>MIN(15,(a).e-(b).e+1));
+      r.e = (a).e+1;
+   }
+   else 
+   {
+      r.m = ((a).m>>MIN(15,(b).e-(a).e+1)) - ((b).m>>1);
+      r.e = (b).e+1;
+   }
+   if (r.m>0)
+   {
+      if (r.m<16384)
+      {
+         r.m<<=1;
+         r.e-=1;
+      }
+   } else {
+      if (r.m>-16384)
+      {
+         r.m<<=1;
+         r.e-=1;
+      }
+   }
+   /*printf ("%f + %f = %f\n", REALFLOAT(a), REALFLOAT(b), REALFLOAT(r));*/
+   return r;
+}
+
+static inline int FLOAT_LT(spx_float_t a, spx_float_t b)
+{
+   if (a.m==0)
+      return b.m>0;
+   else if (b.m==0)
+      return a.m<0;   
+   if ((a).e > (b).e)
+      return ((a).m>>1) < ((b).m>>MIN(15,(a).e-(b).e+1));
+   else 
+      return ((b).m>>1) > ((a).m>>MIN(15,(b).e-(a).e+1));
+
+}
+
+static inline int FLOAT_GT(spx_float_t a, spx_float_t b)
+{
+   return FLOAT_LT(b,a);
+}
+
+static inline spx_float_t FLOAT_MULT(spx_float_t a, spx_float_t b)
+{
+   spx_float_t r;
+   r.m = (spx_int16_t)((spx_int32_t)(a).m*(b).m>>15);
+   r.e = (a).e+(b).e+15;
+   if (r.m>0)
+   {
+      if (r.m<16384)
+      {
+         r.m<<=1;
+         r.e-=1;
+      }
+   } else {
+      if (r.m>-16384)
+      {
+         r.m<<=1;
+         r.e-=1;
+      }
+   }
+   /*printf ("%f * %f = %f\n", REALFLOAT(a), REALFLOAT(b), REALFLOAT(r));*/
+   return r;   
+}
+
+
+static inline spx_float_t FLOAT_SHL(spx_float_t a, int b)
+{
+   spx_float_t r;
+   r.m = a.m;
+   r.e = a.e+b;
+   return r;
+}
+
+static inline spx_int16_t FLOAT_EXTRACT16(spx_float_t a)
+{
+   if (a.e<0)
+      return EXTRACT16((EXTEND32(a.m)+(EXTEND32(1)<<(-a.e-1)))>>-a.e);
+   else
+      return a.m<<a.e;
+}
+
+static inline spx_int32_t FLOAT_EXTRACT32(spx_float_t a)
+{
+   if (a.e<0)
+      return (EXTEND32(a.m)+(EXTEND32(1)<<(-a.e-1)))>>-a.e;
+   else
+      return EXTEND32(a.m)<<a.e;
+}
+
+static inline spx_int32_t FLOAT_MUL32(spx_float_t a, spx_word32_t b)
+{
+   if (a.e<-15)
+      return SHR32(MULT16_32_Q15(a.m, b),-a.e-15);
+   else
+      return SHL32(MULT16_32_Q15(a.m, b),15+a.e);
+}
+
+static inline spx_float_t FLOAT_MUL32U(spx_word32_t a, spx_word32_t b)
+{
+   int e=0;
+   spx_float_t r;
+   /* FIXME: Handle the sign */
+   if (a==0)
+   {
+      return FLOAT_ZERO;
+   }
+   while (a>32767)
+   {
+      a >>= 1;
+      e++;
+   }
+   while (a<16384)
+   {
+      a <<= 1;
+      e--;
+   }
+   while (b>32767)
+   {
+      b >>= 1;
+      e++;
+   }
+   while (b<16384)
+   {
+      b <<= 1;
+      e--;
+   }
+   r.m = MULT16_16_Q15(a,b);
+   r.e = e+15;
+   return r;
+}
+
+static inline spx_float_t FLOAT_DIV32_FLOAT(spx_word32_t a, spx_float_t b)
+{
+   int e=0;
+   spx_float_t r;
+   /* FIXME: Handle the sign */
+   if (a==0)
+   {
+      return FLOAT_ZERO;
+   }
+   while (a<SHL32(EXTEND32(b.m),14))
+   {
+      a <<= 1;
+      e--;
+   }
+   while (a>=SHL32(EXTEND32(b.m-1),15))
+   {
+      a >>= 1;
+      e++;
+   }
+   r.m = DIV32_16(a,b.m);
+   r.e = e-b.e;
+   return r;
+}
+
+
+static inline spx_float_t FLOAT_DIV32(spx_word32_t a, spx_word32_t b)
+{
+   int e=0;
+   spx_float_t r;
+   /* FIXME: Handle the sign */
+   if (a==0)
+   {
+      return FLOAT_ZERO;
+   }
+   while (b>32767)
+   {
+      b >>= 1;
+      e--;
+   }
+   while (a<SHL32(b,14))
+   {
+      a <<= 1;
+      e--;
+   }
+   while (a>=SHL32(b-1,15))
+   {
+      a >>= 1;
+      e++;
+   }
+   r.m = DIV32_16(a,b);
+   r.e = e;
+   return r;
+}
+
+static inline spx_float_t FLOAT_DIVU(spx_float_t a, spx_float_t b)
+{
+   int e=0;
+   spx_int32_t num;
+   spx_float_t r;
+   num = a.m;
+   while (a.m >= b.m)
+   {
+      e++;
+      a.m >>= 1;
+   }
+   num = num << (15-e);
+   r.m = DIV32_16(num,b.m);
+   r.e = a.e-b.e-15+e;
+   return r;
+}
+
+static inline spx_float_t FLOAT_SQRT(spx_float_t a)
+{
+   spx_float_t r;
+   spx_int32_t m;
+   m = a.m << 14;
+   r.e = a.e - 14;
+   if (r.e & 1)
+   {
+      r.e -= 1;
+      m <<= 1;
+   }
+   r.e >>= 1;
+   r.m = spx_sqrt(m);
+   return r;
+}
+
+#else
+
+#define spx_float_t float
+#define FLOAT_ZERO 0.f
+#define FLOAT_ONE 1.f
+#define FLOAT_HALF 0.5f
+#define PSEUDOFLOAT(x) (x)
+#define FLOAT_MULT(a,b) ((a)*(b))
+#define FLOAT_MUL32(a,b) ((a)*(b))
+#define FLOAT_DIV32(a,b) ((a)/(b))
+#define FLOAT_EXTRACT16(a) (a)
+#define FLOAT_EXTRACT32(a) (a)
+#define FLOAT_ADD(a,b) ((a)+(b))
+#define FLOAT_SUB(a,b) ((a)-(b))
+#define REALFLOAT(x) (x)
+#define FLOAT_DIV32_FLOAT(a,b) ((a)/(b))
+#define FLOAT_MUL32U(a,b) ((a)*(b))
+#define FLOAT_SHL(a,b) (a)
+#define FLOAT_LT(a,b) ((a)<(b))
+#define FLOAT_GT(a,b) ((a)>(b))
+#define FLOAT_DIVU(a,b) ((a)/(b))
+#define FLOAT_SQRT(a) (spx_sqrt(a))
+
+#endif
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/quant_lsp.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/quant_lsp.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,447 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: quant_lsp.c
+   LSP vector quantization
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "quant_lsp.h"
+#include <math.h>
+#ifndef M_PI
+#define M_PI 3.14159265358979323846
+#endif
+
+#include "misc.h"
+
+#ifdef BFIN_ASM
+#include "quant_lsp_bfin.h"
+#endif
+
+#ifdef FIXED_POINT
+
+#define LSP_LINEAR(i) (SHL16(i+1,11))
+#define LSP_LINEAR_HIGH(i) (ADD16(MULT16_16_16(i,2560),6144))
+#define LSP_DIV_256(x) (SHL16((spx_word16_t)x, 5))
+#define LSP_DIV_512(x) (SHL16((spx_word16_t)x, 4))
+#define LSP_DIV_1024(x) (SHL16((spx_word16_t)x, 3))
+#define LSP_PI 25736
+
+#else
+
+#define LSP_LINEAR(i) (.25*(i)+.25)
+#define LSP_LINEAR_HIGH(i) (.3125*(i)+.75)
+#define LSP_SCALE 256.
+#define LSP_DIV_256(x) (0.0039062*(x))
+#define LSP_DIV_512(x) (0.0019531*(x))
+#define LSP_DIV_1024(x) (0.00097656*(x))
+#define LSP_PI M_PI
+
+#endif
+
+static void compute_quant_weights(spx_lsp_t *qlsp, spx_word16_t *quant_weight, int order)
+{
+   int i;
+   spx_word16_t tmp1, tmp2;
+   for (i=0;i<order;i++)
+   {
+      if (i==0)
+         tmp1 = qlsp[i];
+      else
+         tmp1 = qlsp[i]-qlsp[i-1];
+      if (i==order-1)
+         tmp2 = LSP_PI-qlsp[i];
+      else
+         tmp2 = qlsp[i+1]-qlsp[i];
+      if (tmp2<tmp1)
+         tmp1 = tmp2;
+#ifdef FIXED_POINT
+      quant_weight[i] = DIV32_16(81920,ADD16(300,tmp1));
+#else
+      quant_weight[i] = 10/(.04+tmp1);
+#endif
+   }
+
+}
+
+/* Note: x is modified*/
+#ifndef OVERRIDE_LSP_QUANT
+static int lsp_quant(spx_word16_t *x, const signed char *cdbk, int nbVec, int nbDim)
+{
+   int i,j;
+   spx_word32_t dist;
+   spx_word16_t tmp;
+   spx_word32_t best_dist=VERY_LARGE32;
+   int best_id=0;
+   const signed char *ptr=cdbk;
+   for (i=0;i<nbVec;i++)
+   {
+      dist=0;
+      for (j=0;j<nbDim;j++)
+      {
+         tmp=SUB16(x[j],SHL16((spx_word16_t)*ptr++,5));
+         dist=MAC16_16(dist,tmp,tmp);
+      } 
+      if (dist<best_dist)
+      {
+         best_dist=dist;
+         best_id=i;
+      }
+   }
+
+   for (j=0;j<nbDim;j++)
+      x[j] = SUB16(x[j],SHL16((spx_word16_t)cdbk[best_id*nbDim+j],5));
+    
+   return best_id;
+}
+#endif
+
+/* Note: x is modified*/
+#ifndef OVERRIDE_LSP_WEIGHT_QUANT
+static int lsp_weight_quant(spx_word16_t *x, spx_word16_t *weight, const signed char *cdbk, int nbVec, int nbDim)
+{
+   int i,j;
+   spx_word32_t dist;
+   spx_word16_t tmp;
+   spx_word32_t best_dist=VERY_LARGE32;
+   int best_id=0;
+   const signed char *ptr=cdbk;
+   for (i=0;i<nbVec;i++)
+   {
+      dist=0;
+      for (j=0;j<nbDim;j++)
+      {
+         tmp=SUB16(x[j],SHL16((spx_word16_t)*ptr++,5));
+         dist=MAC16_32_Q15(dist,weight[j],MULT16_16(tmp,tmp));
+      }
+      if (dist<best_dist)
+      {
+         best_dist=dist;
+         best_id=i;
+      }
+   }
+   
+   for (j=0;j<nbDim;j++)
+      x[j] = SUB16(x[j],SHL16((spx_word16_t)cdbk[best_id*nbDim+j],5));
+   return best_id;
+}
+#endif
+
+void lsp_quant_nb(spx_lsp_t *lsp, spx_lsp_t *qlsp, int order, SpeexBits *bits)
+{
+   int i;
+   int id;
+   spx_word16_t quant_weight[10];
+   
+   for (i=0;i<order;i++)
+      qlsp[i]=lsp[i];
+
+   compute_quant_weights(qlsp, quant_weight, order);
+
+   for (i=0;i<order;i++)
+      qlsp[i]=SUB16(qlsp[i],LSP_LINEAR(i));
+
+#ifndef FIXED_POINT
+   for (i=0;i<order;i++)
+      qlsp[i] = LSP_SCALE*qlsp[i];
+#endif
+   id = lsp_quant(qlsp, cdbk_nb, NB_CDBK_SIZE, order);
+   speex_bits_pack(bits, id, 6);
+
+   for (i=0;i<order;i++)
+      qlsp[i]*=2;
+ 
+   id = lsp_weight_quant(qlsp, quant_weight, cdbk_nb_low1, NB_CDBK_SIZE_LOW1, 5);
+   speex_bits_pack(bits, id, 6);
+
+   for (i=0;i<5;i++)
+      qlsp[i]*=2;
+
+   id = lsp_weight_quant(qlsp, quant_weight, cdbk_nb_low2, NB_CDBK_SIZE_LOW2, 5);
+   speex_bits_pack(bits, id, 6);
+
+   id = lsp_weight_quant(qlsp+5, quant_weight+5, cdbk_nb_high1, NB_CDBK_SIZE_HIGH1, 5);
+   speex_bits_pack(bits, id, 6);
+
+   for (i=5;i<10;i++)
+      qlsp[i]*=2;
+
+   id = lsp_weight_quant(qlsp+5, quant_weight+5, cdbk_nb_high2, NB_CDBK_SIZE_HIGH2, 5);
+   speex_bits_pack(bits, id, 6);
+
+#ifdef FIXED_POINT
+   for (i=0;i<order;i++)
+      qlsp[i]=PSHR16(qlsp[i],2);
+#else
+   for (i=0;i<order;i++)
+      qlsp[i]=qlsp[i] * .00097656;
+#endif
+
+   for (i=0;i<order;i++)
+      qlsp[i]=lsp[i]-qlsp[i];
+}
+
+void lsp_unquant_nb(spx_lsp_t *lsp, int order, SpeexBits *bits)
+{
+   int i, id;
+   for (i=0;i<order;i++)
+      lsp[i]=LSP_LINEAR(i);
+
+
+   id=speex_bits_unpack_unsigned(bits, 6);
+   for (i=0;i<10;i++)
+      lsp[i] = ADD32(lsp[i], LSP_DIV_256(cdbk_nb[id*10+i]));
+
+   id=speex_bits_unpack_unsigned(bits, 6);
+   for (i=0;i<5;i++)
+      lsp[i] = ADD16(lsp[i], LSP_DIV_512(cdbk_nb_low1[id*5+i]));
+
+   id=speex_bits_unpack_unsigned(bits, 6);
+   for (i=0;i<5;i++)
+      lsp[i] = ADD32(lsp[i], LSP_DIV_1024(cdbk_nb_low2[id*5+i]));
+
+   id=speex_bits_unpack_unsigned(bits, 6);
+   for (i=0;i<5;i++)
+      lsp[i+5] = ADD32(lsp[i+5], LSP_DIV_512(cdbk_nb_high1[id*5+i]));
+   
+   id=speex_bits_unpack_unsigned(bits, 6);
+   for (i=0;i<5;i++)
+      lsp[i+5] = ADD32(lsp[i+5], LSP_DIV_1024(cdbk_nb_high2[id*5+i]));
+}
+
+
+void lsp_quant_lbr(spx_lsp_t *lsp, spx_lsp_t *qlsp, int order, SpeexBits *bits)
+{
+   int i;
+   int id;
+   spx_word16_t quant_weight[10];
+
+   for (i=0;i<order;i++)
+      qlsp[i]=lsp[i];
+
+   compute_quant_weights(qlsp, quant_weight, order);
+
+   for (i=0;i<order;i++)
+      qlsp[i]=SUB16(qlsp[i],LSP_LINEAR(i));
+#ifndef FIXED_POINT
+   for (i=0;i<order;i++)
+      qlsp[i]=qlsp[i]*LSP_SCALE;
+#endif
+   id = lsp_quant(qlsp, cdbk_nb, NB_CDBK_SIZE, order);
+   speex_bits_pack(bits, id, 6);
+   
+   for (i=0;i<order;i++)
+      qlsp[i]*=2;
+   
+   id = lsp_weight_quant(qlsp, quant_weight, cdbk_nb_low1, NB_CDBK_SIZE_LOW1, 5);
+   speex_bits_pack(bits, id, 6);
+
+   id = lsp_weight_quant(qlsp+5, quant_weight+5, cdbk_nb_high1, NB_CDBK_SIZE_HIGH1, 5);
+   speex_bits_pack(bits, id, 6);
+
+#ifdef FIXED_POINT
+   for (i=0;i<order;i++)
+      qlsp[i] = PSHR16(qlsp[i],1);
+#else
+   for (i=0;i<order;i++)
+      qlsp[i] = qlsp[i]*0.0019531;
+#endif
+
+   for (i=0;i<order;i++)
+      qlsp[i]=lsp[i]-qlsp[i];
+}
+
+void lsp_unquant_lbr(spx_lsp_t *lsp, int order, SpeexBits *bits)
+{
+   int i, id;
+   for (i=0;i<order;i++)
+      lsp[i]=LSP_LINEAR(i);
+
+
+   id=speex_bits_unpack_unsigned(bits, 6);
+   for (i=0;i<10;i++)
+      lsp[i] += LSP_DIV_256(cdbk_nb[id*10+i]);
+
+   id=speex_bits_unpack_unsigned(bits, 6);
+   for (i=0;i<5;i++)
+      lsp[i] += LSP_DIV_512(cdbk_nb_low1[id*5+i]);
+
+   id=speex_bits_unpack_unsigned(bits, 6);
+   for (i=0;i<5;i++)
+      lsp[i+5] += LSP_DIV_512(cdbk_nb_high1[id*5+i]);
+   
+}
+
+
+#ifdef DISABLE_WIDEBAND
+void lsp_quant_high(spx_lsp_t *lsp, spx_lsp_t *qlsp, int order, SpeexBits *bits)
+{
+   speex_error("Wideband and Ultra-wideband are disabled");
+}
+void lsp_unquant_high(spx_lsp_t *lsp, int order, SpeexBits *bits)
+{
+   speex_error("Wideband and Ultra-wideband are disabled");
+}
+#else
+extern const signed char high_lsp_cdbk[];
+extern const signed char high_lsp_cdbk2[];
+
+
+void lsp_quant_high(spx_lsp_t *lsp, spx_lsp_t *qlsp, int order, SpeexBits *bits)
+{
+   int i;
+   int id;
+   spx_word16_t quant_weight[10];
+
+   for (i=0;i<order;i++)
+      qlsp[i]=lsp[i];
+
+   compute_quant_weights(qlsp, quant_weight, order);
+
+   /*   quant_weight[0] = 10/(qlsp[1]-qlsp[0]);
+   quant_weight[order-1] = 10/(qlsp[order-1]-qlsp[order-2]);
+   for (i=1;i<order-1;i++)
+   {
+      tmp1 = 10/(qlsp[i]-qlsp[i-1]);
+      tmp2 = 10/(qlsp[i+1]-qlsp[i]);
+      quant_weight[i] = tmp1 > tmp2 ? tmp1 : tmp2;
+      }*/
+
+   for (i=0;i<order;i++)
+      qlsp[i]=SUB16(qlsp[i],LSP_LINEAR_HIGH(i));
+#ifndef FIXED_POINT
+   for (i=0;i<order;i++)
+      qlsp[i] = qlsp[i]*LSP_SCALE;
+#endif
+   id = lsp_quant(qlsp, high_lsp_cdbk, 64, order);
+   speex_bits_pack(bits, id, 6);
+
+   for (i=0;i<order;i++)
+      qlsp[i]*=2;
+
+   id = lsp_weight_quant(qlsp, quant_weight, high_lsp_cdbk2, 64, order);
+   speex_bits_pack(bits, id, 6);
+
+#ifdef FIXED_POINT
+   for (i=0;i<order;i++)
+      qlsp[i] = PSHR16(qlsp[i],1);
+#else
+   for (i=0;i<order;i++)
+      qlsp[i] = qlsp[i]*0.0019531;
+#endif
+
+   for (i=0;i<order;i++)
+      qlsp[i]=lsp[i]-qlsp[i];
+}
+
+void lsp_unquant_high(spx_lsp_t *lsp, int order, SpeexBits *bits)
+{
+
+   int i, id;
+   for (i=0;i<order;i++)
+      lsp[i]=LSP_LINEAR_HIGH(i);
+
+
+   id=speex_bits_unpack_unsigned(bits, 6);
+   for (i=0;i<order;i++)
+      lsp[i] += LSP_DIV_256(high_lsp_cdbk[id*order+i]);
+
+
+   id=speex_bits_unpack_unsigned(bits, 6);
+   for (i=0;i<order;i++)
+      lsp[i] += LSP_DIV_512(high_lsp_cdbk2[id*order+i]);
+}
+
+#endif
+
+
+#ifdef EPIC_48K
+
+extern const signed char cdbk_lsp_vlbr[5120];
+extern const signed char cdbk_lsp2_vlbr[160];
+
+void lsp_quant_48k(spx_lsp_t *lsp, spx_lsp_t *qlsp, int order, SpeexBits *bits)
+{
+   int i;
+   int id;
+   spx_word16_t quant_weight[10];
+
+   for (i=0;i<order;i++)
+      qlsp[i]=lsp[i];
+
+   compute_quant_weights(qlsp, quant_weight, order);
+
+   for (i=0;i<order;i++)
+      qlsp[i]=SUB16(qlsp[i],LSP_SCALING*(.25*i+.3125));
+#ifndef FIXED_POINT
+   for (i=0;i<order;i++)
+      qlsp[i] = qlsp[i]*LSP_SCALE;
+#endif
+   
+   id = lsp_quant(qlsp, cdbk_lsp_vlbr, 512, order);
+   speex_bits_pack(bits, id, 9);
+
+   for (i=0;i<order;i++)
+      qlsp[i]*=4;
+   
+   id = lsp_weight_quant(qlsp, quant_weight, cdbk_lsp2_vlbr, 16, 10);
+   speex_bits_pack(bits, id, 4);
+
+#ifdef FIXED_POINT
+   for (i=0;i<order;i++)
+      qlsp[i]=PSHR(qlsp[i],2);
+#else
+   for (i=0;i<order;i++)
+      qlsp[i]=qlsp[i]*0.00097655;
+#endif
+
+   for (i=0;i<order;i++)
+      qlsp[i]=lsp[i]-qlsp[i];
+}
+
+void lsp_unquant_48k(spx_lsp_t *lsp, int order, SpeexBits *bits)
+{
+   int i, id;
+   for (i=0;i<order;i++)
+      lsp[i]=LSP_SCALING*(.25*i+.3125);
+
+
+   id=speex_bits_unpack_unsigned(bits, 9);
+   for (i=0;i<10;i++)
+      lsp[i] += LSP_SCALING*0.0039062*cdbk_lsp_vlbr[id*10+i];
+
+   id=speex_bits_unpack_unsigned(bits, 4);
+   for (i=0;i<10;i++)
+      lsp[i] += LSP_SCALING*0.00097655*cdbk_lsp2_vlbr[id*10+i];
+   
+}
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/quant_lsp.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/quant_lsp.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,83 @@
+/* Copyright (C) 2002 Jean-Marc Valin */
+/**
+   @file quant_lsp.h
+   @brief LSP vector quantization
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef QUANT_LSP_H
+#define QUANT_LSP_H
+
+#include <speex/speex_bits.h>
+#include "misc.h"
+
+#define MAX_LSP_SIZE 20
+
+#define NB_CDBK_SIZE 64
+#define NB_CDBK_SIZE_LOW1 64
+#define NB_CDBK_SIZE_LOW2 64
+#define NB_CDBK_SIZE_HIGH1 64
+#define NB_CDBK_SIZE_HIGH2 64
+
+/*Narrowband codebooks*/
+extern const signed char cdbk_nb[];
+extern const signed char cdbk_nb_low1[];
+extern const signed char cdbk_nb_low2[];
+extern const signed char cdbk_nb_high1[];
+extern const signed char cdbk_nb_high2[];
+
+/* Quantizes narrowband LSPs with 30 bits */
+void lsp_quant_nb(spx_lsp_t *lsp, spx_lsp_t *qlsp, int order, SpeexBits *bits);
+
+/* Decodes quantized narrowband LSPs */
+void lsp_unquant_nb(spx_lsp_t *lsp, int order, SpeexBits *bits);
+
+/* Quantizes low bit-rate narrowband LSPs with 18 bits */
+void lsp_quant_lbr(spx_lsp_t *lsp, spx_lsp_t *qlsp, int order, SpeexBits *bits);
+
+/* Decodes quantized low bit-rate narrowband LSPs */
+void lsp_unquant_lbr(spx_lsp_t *lsp, int order, SpeexBits *bits);
+
+/* Quantizes high-band LSPs with 12 bits */
+void lsp_quant_high(spx_lsp_t *lsp, spx_lsp_t *qlsp, int order, SpeexBits *bits);
+
+/* Decodes high-band LSPs */
+void lsp_unquant_high(spx_lsp_t *lsp, int order, SpeexBits *bits);
+
+#ifdef EPIC_48K
+/* Quantizes narrowband LSPs with 14 bits */
+void lsp_quant_48k(spx_lsp_t *lsp, spx_lsp_t *qlsp, int order, SpeexBits *bits);
+
+/* Decodes quantized narrowband LSPs (14 bits) */
+void lsp_unquant_48k(spx_lsp_t *lsp, int order, SpeexBits *bits);
+#endif
+
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/quant_lsp_bfin.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/quant_lsp_bfin.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,165 @@
+/* Copyright (C) 2006 David Rowe */
+/**
+   @file quant_lsp_bfin.h
+   @author David Rowe
+   @brief Various compatibility routines for Speex (Blackfin version)
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#define OVERRIDE_LSP_QUANT
+#ifdef OVERRIDE_LSP_QUANT
+
+/*
+  Note http://gcc.gnu.org/onlinedocs/gcc/Machine-Constraints.html
+  well tell you all the magic resgister constraints used below
+  for gcc in-line asm.
+*/
+
+static int lsp_quant(
+  spx_word16_t      *x, 
+  const signed char *cdbk, 
+  int                nbVec, 
+  int                nbDim
+)
+{
+   int          j;
+   spx_word32_t best_dist=1<<30;
+   int          best_id=0;
+
+   __asm__ __volatile__
+     (
+"	%0 = 1 (X);\n\t"                       /* %0: best_dist */    
+"	%0 <<= 30;\n\t"     
+"	%1 = 0 (X);\n\t"                       /* %1: best_i         */
+"       P2 = %3\n\t"                           /* P2: ptr to cdbk    */
+"       R5 = 0;\n\t"                           /* R5: best cb entry  */
+
+"       R0 = %5;\n\t"                          /* set up circ addr   */
+"       R0 <<= 1;\n\t"
+"       L0 = R0;\n\t"                          
+"       I0 = %2;\n\t"                          /* %2: &x[0]          */
+"       B0 = %2;\n\t"                          
+
+"       R2.L = W [I0++];\n\t"
+"	LSETUP (lq1, lq2) LC0 = %4;\n\t"
+"lq1:	  R3 = 0;\n\t"                         /* R3: dist           */
+"	  LSETUP (lq3, lq4) LC1 = %5;\n\t"
+"lq3:       R1 = B [P2++] (X);\n\t"            
+"	    R1 <<= 5;\n\t"
+"	    R0.L = R2.L - R1.L || R2.L = W [I0++];\n\t"
+"	    R0 = R0.L*R0.L;\n\t"
+"lq4:	    R3 = R3 + R0;\n\t"
+
+"	  cc =R3<%0;\n\t"
+"	  if cc %0=R3;\n\t"
+"	  if cc %1=R5;\n\t"
+"lq2:     R5 += 1;\n\t"
+"         L0 = 0;\n\t"
+   : "=&d" (best_dist), "=&d" (best_id)
+   : "a" (x), "b" (cdbk), "a" (nbVec), "a" (nbDim)
+   : "I0", "P2", "R0", "R1", "R2", "R3", "R5", "L0", "B0", "A0"
+   );
+
+   for (j=0;j<nbDim;j++) {
+      x[j] = SUB16(x[j],SHL16((spx_word16_t)cdbk[best_id*nbDim+j],5));
+   }
+   return best_id;
+}
+#endif
+
+#define OVERRIDE_LSP_WEIGHT_QUANT
+#ifdef OVERRIDE_LSP_WEIGHT_QUANT
+
+/*
+  Note http://gcc.gnu.org/onlinedocs/gcc/Machine-Constraints.html
+  well tell you all the magic resgister constraints used below
+  for gcc in-line asm.
+*/
+
+static int lsp_weight_quant(
+  spx_word16_t      *x, 
+  spx_word16_t      *weight, 
+  const signed char *cdbk, 
+  int                nbVec, 
+  int                nbDim
+)
+{
+   int          j;
+   spx_word32_t best_dist=1<<30;
+   int          best_id=0;
+
+   __asm__ __volatile__
+     (
+"	%0 = 1 (X);\n\t"                       /* %0: best_dist */    
+"	%0 <<= 30;\n\t"     
+"	%1 = 0 (X);\n\t"                       /* %1: best_i         */
+"       P2 = %4\n\t"                           /* P2: ptr to cdbk    */
+"       R5 = 0;\n\t"                           /* R5: best cb entry  */
+
+"       R0 = %6;\n\t"                          /* set up circ addr   */
+"       R0 <<= 1;\n\t"
+"       L0 = R0;\n\t"                          
+"       L1 = R0;\n\t"
+"       I0 = %2;\n\t"                          /* %2: &x[0]          */
+"	I1 = %3;\n\t"                          /* %3: &weight[0]     */
+"       B0 = %2;\n\t"                          
+"	B1 = %3;\n\t"                          
+
+"	LSETUP (lwq1, lwq2) LC0 = %5;\n\t"
+"lwq1:	  R3 = 0 (X);\n\t"                     /* R3: dist           */
+"	  LSETUP (lwq3, lwq4) LC1 = %6;\n\t"
+"lwq3:	    R0.L = W [I0++] || R2.L = W [I1++];\n\t"
+"           R1 = B [P2++] (X);\n\t"            
+"	    R1 <<= 5;\n\t"
+"	    R0.L = R0.L - R1.L;\n\t"
+"           R0 = R0.L*R0.L;\n\t"
+"	    A1 = R2.L*R0.L (M,IS);\n\t"
+"	    A1 = A1 >>> 16;\n\t"
+"	    R1 = (A1 += R2.L*R0.H) (IS);\n\t"
+"lwq4:	    R3 = R3 + R1;\n\t"
+
+"	  cc =R3<%0;\n\t"
+"	  if cc %0=R3;\n\t"
+"	  if cc %1=R5;\n\t"
+"lwq2:    R5 += 1;\n\t"
+"         L0 = 0;\n\t"
+"         L1 = 0;\n\t"
+   : "=&d" (best_dist), "=&d" (best_id)
+   : "a" (x), "a" (weight), "b" (cdbk), "a" (nbVec), "a" (nbDim)
+   : "I0", "I1", "P2", "R0", "R1", "R2", "R3", "R5", "A1",
+     "L0", "L1", "B0", "B1"
+   );
+
+   for (j=0;j<nbDim;j++) {
+      x[j] = SUB16(x[j],SHL16((spx_word16_t)cdbk[best_id*nbDim+j],5));
+   }
+   return best_id;
+}
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/sb_celp.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/sb_celp.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,1650 @@
+/* Copyright (C) 2002-2006 Jean-Marc Valin 
+   File: sb_celp.c
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <math.h>
+#include "sb_celp.h"
+#include "stdlib.h"
+#include "filters.h"
+#include "lpc.h"
+#include "lsp.h"
+#include "stack_alloc.h"
+#include "cb_search.h"
+#include "quant_lsp.h"
+#include "vq.h"
+#include "ltp.h"
+#include "misc.h"
+
+/* Default size for the encoder and decoder stack (can be changed at compile time).
+   This does not apply when using variable-size arrays or alloca. */
+#ifndef SB_ENC_STACK
+#define SB_ENC_STACK (10000*sizeof(spx_sig_t))
+#endif
+
+#ifndef SB_DEC_STACK
+#define SB_DEC_STACK (6000*sizeof(spx_sig_t))
+#endif
+
+
+#ifdef DISABLE_WIDEBAND
+void *sb_encoder_init(const SpeexMode *m)
+{
+   speex_error("Wideband and Ultra-wideband are disabled");
+   return NULL;
+}
+void sb_encoder_destroy(void *state)
+{
+   speex_error("Wideband and Ultra-wideband are disabled");
+}
+int sb_encode(void *state, void *vin, SpeexBits *bits)
+{
+   speex_error("Wideband and Ultra-wideband are disabled");
+   return -2;
+}
+void *sb_decoder_init(const SpeexMode *m)
+{
+   speex_error("Wideband and Ultra-wideband are disabled");
+   return NULL;
+}
+void sb_decoder_destroy(void *state)
+{
+   speex_error("Wideband and Ultra-wideband are disabled");
+}
+int sb_decode(void *state, SpeexBits *bits, void *vout)
+{
+   speex_error("Wideband and Ultra-wideband are disabled");
+   return -2;
+}
+int sb_encoder_ctl(void *state, int request, void *ptr)
+{
+   speex_error("Wideband and Ultra-wideband are disabled");
+   return -2;
+}
+int sb_decoder_ctl(void *state, int request, void *ptr)
+{
+   speex_error("Wideband and Ultra-wideband are disabled");
+   return -2;
+}
+#else
+
+
+#ifndef M_PI
+#define M_PI           3.14159265358979323846  /* pi */
+#endif
+
+#define sqr(x) ((x)*(x))
+
+#define SUBMODE(x) st->submodes[st->submodeID]->x
+
+#ifdef FIXED_POINT
+static const spx_word16_t gc_quant_bound[16] = {125, 164, 215, 282, 370, 484, 635, 832, 1090, 1428, 1871, 2452, 3213, 4210, 5516, 7228};
+#define LSP_MARGIN 410
+#define LSP_DELTA1 6553
+#define LSP_DELTA2 1638
+
+#else
+
+#define LSP_MARGIN .05
+#define LSP_DELTA1 .2
+#define LSP_DELTA2 .05
+
+#endif
+
+#define QMF_ORDER 64
+
+#ifdef FIXED_POINT
+static const spx_word16_t h0[64] = {2, -7, -7, 18, 15, -39, -25, 75, 35, -130, -41, 212, 38, -327, -17, 483, -32, -689, 124, 956, -283, -1307, 543, 1780, -973, -2467, 1733, 3633, -3339, -6409, 9059, 30153, 30153, 9059, -6409, -3339, 3633, 1733, -2467, -973, 1780, 543, -1307, -283, 956, 124, -689, -32, 483, -17, -327, 38, 212, -41, -130, 35, 75, -25, -39, 15, 18, -7, -7, 2};
+
+static const spx_word16_t h1[64] = {2, 7, -7, -18, 15, 39, -25, -75, 35, 130, -41, -212, 38, 327, -17, -483, -32, 689, 124, -956, -283, 1307, 543, -1780, -973, 2467, 1733, -3633, -3339, 6409, 9059, -30153, 30153, -9059, -6409, 3339, 3633, -1733, -2467, 973, 1780, -543, -1307, 283, 956, -124, -689, 32, 483, 17, -327, -38, 212, 41, -130, -35, 75, 25, -39, -15, 18, 7, -7, -2};
+
+
+#else
+static const float h0[64] = {
+   3.596189e-05, -0.0001123515,
+   -0.0001104587, 0.0002790277,
+   0.0002298438, -0.0005953563,
+   -0.0003823631, 0.00113826,
+   0.0005308539, -0.001986177,
+   -0.0006243724, 0.003235877,
+   0.0005743159, -0.004989147,
+   -0.0002584767, 0.007367171,
+   -0.0004857935, -0.01050689,
+   0.001894714, 0.01459396,
+   -0.004313674, -0.01994365,
+   0.00828756, 0.02716055,
+   -0.01485397, -0.03764973,
+   0.026447, 0.05543245,
+   -0.05095487, -0.09779096,
+   0.1382363, 0.4600981,
+   0.4600981, 0.1382363,
+   -0.09779096, -0.05095487,
+   0.05543245, 0.026447,
+   -0.03764973, -0.01485397,
+   0.02716055, 0.00828756,
+   -0.01994365, -0.004313674,
+   0.01459396, 0.001894714,
+   -0.01050689, -0.0004857935,
+   0.007367171, -0.0002584767,
+   -0.004989147, 0.0005743159,
+   0.003235877, -0.0006243724,
+   -0.001986177, 0.0005308539,
+   0.00113826, -0.0003823631,
+   -0.0005953563, 0.0002298438,
+   0.0002790277, -0.0001104587,
+   -0.0001123515, 3.596189e-05
+};
+
+static const float h1[64] = {
+   3.596189e-05, 0.0001123515,
+   -0.0001104587, -0.0002790277,
+   0.0002298438, 0.0005953563,
+   -0.0003823631, -0.00113826,
+   0.0005308539, 0.001986177,
+   -0.0006243724, -0.003235877,
+   0.0005743159, 0.004989147,
+   -0.0002584767, -0.007367171,
+   -0.0004857935, 0.01050689,
+   0.001894714, -0.01459396,
+   -0.004313674, 0.01994365,
+   0.00828756, -0.02716055,
+   -0.01485397, 0.03764973,
+   0.026447, -0.05543245,
+   -0.05095487, 0.09779096,
+   0.1382363, -0.4600981,
+   0.4600981, -0.1382363,
+   -0.09779096, 0.05095487,
+   0.05543245, -0.026447,
+   -0.03764973, 0.01485397,
+   0.02716055, -0.00828756,
+   -0.01994365, 0.004313674,
+   0.01459396, -0.001894714,
+   -0.01050689, 0.0004857935,
+   0.007367171, 0.0002584767,
+   -0.004989147, -0.0005743159,
+   0.003235877, 0.0006243724,
+   -0.001986177, -0.0005308539,
+   0.00113826, 0.0003823631,
+   -0.0005953563, -0.0002298438,
+   0.0002790277, 0.0001104587,
+   -0.0001123515, -3.596189e-05
+};
+#endif
+
+extern const spx_word16_t lpc_window[];
+
+static void mix_and_saturate(spx_word32_t *x0, spx_word32_t *x1, spx_word16_t *out, int len)
+{
+   int i;
+   for (i=0;i<len;i++)
+   {
+      spx_word32_t tmp;
+#ifdef FIXED_POINT
+      tmp=PSHR(x0[i]-x1[i],SIG_SHIFT-1);
+#else
+      tmp=2*(x0[i]-x1[i]);
+#endif
+      if (tmp>32767)
+         out[i] = 32767;
+      else if (tmp<-32767)
+         out[i] = -32767;
+      else
+         out[i] = tmp;
+   }
+}
+
+void *sb_encoder_init(const SpeexMode *m)
+{
+   int i;
+   spx_int32_t tmp;
+   SBEncState *st;
+   const SpeexSBMode *mode;
+
+   st = (SBEncState*)speex_alloc(sizeof(SBEncState));
+   if (!st)
+      return NULL;
+#if defined(VAR_ARRAYS) || defined (USE_ALLOCA)
+   st->stack = NULL;
+#else
+   st->stack = (char*)speex_alloc_scratch(SB_ENC_STACK);
+#endif
+   st->mode = m;
+   mode = (const SpeexSBMode*)m->mode;
+
+
+   st->st_low = speex_encoder_init(mode->nb_mode);
+   st->full_frame_size = 2*mode->frameSize;
+   st->frame_size = mode->frameSize;
+   st->subframeSize = mode->subframeSize;
+   st->nbSubframes = mode->frameSize/mode->subframeSize;
+   st->windowSize = st->frame_size+st->subframeSize;
+   st->lpcSize=mode->lpcSize;
+   st->bufSize=mode->bufSize;
+
+   st->encode_submode = 1;
+   st->submodes=mode->submodes;
+   st->submodeSelect = st->submodeID=mode->defaultSubmode;
+   
+   tmp=9;
+   speex_encoder_ctl(st->st_low, SPEEX_SET_QUALITY, &tmp);
+   tmp=1;
+   speex_encoder_ctl(st->st_low, SPEEX_SET_WIDEBAND, &tmp);
+
+   st->lag_factor = mode->lag_factor;
+   st->lpc_floor = mode->lpc_floor;
+   st->gamma1=mode->gamma1;
+   st->gamma2=mode->gamma2;
+   st->first=1;
+
+   st->x0d=(spx_sig_t*)speex_alloc((st->frame_size)*sizeof(spx_sig_t));
+   st->x1d=(spx_sig_t*)speex_alloc((st->frame_size)*sizeof(spx_sig_t));
+   st->high=(spx_sig_t*)speex_alloc((st->full_frame_size)*sizeof(spx_sig_t));
+   st->y0=(spx_sig_t*)speex_alloc((st->full_frame_size)*sizeof(spx_sig_t));
+   st->y1=(spx_sig_t*)speex_alloc((st->full_frame_size)*sizeof(spx_sig_t));
+
+   st->h0_mem=(spx_word16_t*)speex_alloc((QMF_ORDER)*sizeof(spx_word16_t));
+   st->h1_mem=(spx_word16_t*)speex_alloc((QMF_ORDER)*sizeof(spx_word16_t));
+   st->g0_mem=(spx_word32_t*)speex_alloc((QMF_ORDER)*sizeof(spx_word32_t));
+   st->g1_mem=(spx_word32_t*)speex_alloc((QMF_ORDER)*sizeof(spx_word32_t));
+
+   st->excBuf=(spx_sig_t*)speex_alloc((st->bufSize)*sizeof(spx_sig_t));
+   st->exc = st->excBuf + st->bufSize - st->windowSize;
+
+   st->res=(spx_sig_t*)speex_alloc((st->frame_size)*sizeof(spx_sig_t));
+   st->sw=(spx_sig_t*)speex_alloc((st->frame_size)*sizeof(spx_sig_t));
+   st->window= lpc_window;
+
+   st->lagWindow = (spx_word16_t*)speex_alloc((st->lpcSize+1)*sizeof(spx_word16_t));
+   for (i=0;i<st->lpcSize+1;i++)
+      st->lagWindow[i]=16384*exp(-.5*sqr(2*M_PI*st->lag_factor*i));
+
+   st->autocorr = (spx_word16_t*)speex_alloc((st->lpcSize+1)*sizeof(spx_word16_t));
+   st->lpc = (spx_coef_t*)speex_alloc(st->lpcSize*sizeof(spx_coef_t));
+   st->bw_lpc1 = (spx_coef_t*)speex_alloc(st->lpcSize*sizeof(spx_coef_t));
+   st->bw_lpc2 = (spx_coef_t*)speex_alloc(st->lpcSize*sizeof(spx_coef_t));
+   st->lsp = (spx_lsp_t*)speex_alloc(st->lpcSize*sizeof(spx_lsp_t));
+   st->qlsp = (spx_lsp_t*)speex_alloc(st->lpcSize*sizeof(spx_lsp_t));
+   st->old_lsp = (spx_lsp_t*)speex_alloc(st->lpcSize*sizeof(spx_lsp_t));
+   st->old_qlsp = (spx_lsp_t*)speex_alloc(st->lpcSize*sizeof(spx_lsp_t));
+   st->interp_lsp = (spx_lsp_t*)speex_alloc(st->lpcSize*sizeof(spx_lsp_t));
+   st->interp_qlsp = (spx_lsp_t*)speex_alloc(st->lpcSize*sizeof(spx_lsp_t));
+   st->interp_lpc = (spx_coef_t*)speex_alloc(st->lpcSize*sizeof(spx_coef_t));
+   st->interp_qlpc = (spx_coef_t*)speex_alloc(st->lpcSize*sizeof(spx_coef_t));
+   st->pi_gain = (spx_word32_t*)speex_alloc((st->nbSubframes)*sizeof(spx_word32_t));
+   st->low_innov = (spx_word32_t*)speex_alloc((st->frame_size)*sizeof(spx_word32_t));
+   speex_encoder_ctl(st->st_low, SPEEX_SET_INNOVATION_SAVE, st->low_innov);
+   st->innov_save = NULL;
+   
+   st->mem_sp = (spx_mem_t*)speex_alloc((st->lpcSize)*sizeof(spx_mem_t));
+   st->mem_sp2 = (spx_mem_t*)speex_alloc((st->lpcSize)*sizeof(spx_mem_t));
+   st->mem_sw = (spx_mem_t*)speex_alloc((st->lpcSize)*sizeof(spx_mem_t));
+
+   st->vbr_quality = 8;
+   st->vbr_enabled = 0;
+   st->vbr_max = 0;
+   st->vbr_max_high = 20000;  /* We just need a big value here */
+   st->vad_enabled = 0;
+   st->abr_enabled = 0;
+   st->relative_quality=0;
+
+   st->complexity=2;
+   speex_encoder_ctl(st->st_low, SPEEX_GET_SAMPLING_RATE, &st->sampling_rate);
+   st->sampling_rate*=2;
+#ifdef ENABLE_VALGRIND
+   VALGRIND_MAKE_READABLE(st, (st->stack-(char*)st));
+#endif
+   return st;
+}
+
+void sb_encoder_destroy(void *state)
+{
+   SBEncState *st=(SBEncState*)state;
+
+   speex_encoder_destroy(st->st_low);
+#if !(defined(VAR_ARRAYS) || defined (USE_ALLOCA))
+   speex_free_scratch(st->stack);
+#endif
+
+   speex_free(st->x0d);
+   speex_free(st->x1d);
+   speex_free(st->high);
+   speex_free(st->y0);
+   speex_free(st->y1);
+
+   speex_free(st->h0_mem);
+   speex_free(st->h1_mem);
+   speex_free(st->g0_mem);
+   speex_free(st->g1_mem);
+
+   speex_free(st->excBuf);
+   speex_free(st->res);
+   speex_free(st->sw);
+   speex_free(st->lagWindow);
+
+   speex_free(st->autocorr);
+   speex_free(st->lpc);
+   speex_free(st->bw_lpc1);
+   speex_free(st->bw_lpc2);
+   speex_free(st->lsp);
+   speex_free(st->qlsp);
+   speex_free(st->old_lsp);
+   speex_free(st->old_qlsp);
+   speex_free(st->interp_lsp);
+   speex_free(st->interp_qlsp);
+   speex_free(st->interp_lpc);
+   speex_free(st->interp_qlpc);
+   speex_free(st->pi_gain);
+   speex_free(st->low_innov);
+
+   speex_free(st->mem_sp);
+   speex_free(st->mem_sp2);
+   speex_free(st->mem_sw);
+
+   
+   speex_free(st);
+}
+
+
+int sb_encode(void *state, void *vin, SpeexBits *bits)
+{
+   SBEncState *st;
+   int i, roots, sub;
+   char *stack;
+   VARDECL(spx_mem_t *mem);
+   VARDECL(spx_sig_t *innov);
+   VARDECL(spx_word16_t *target);
+   VARDECL(spx_word16_t *syn_resp);
+   VARDECL(spx_word32_t *low_pi_gain);
+   VARDECL(spx_word16_t *low_exc);
+   const SpeexSBMode *mode;
+   spx_int32_t dtx;
+   spx_word16_t *in = (spx_word16_t*)vin;
+
+   st = (SBEncState*)state;
+   stack=st->stack;
+   mode = (const SpeexSBMode*)(st->mode->mode);
+
+   {
+      VARDECL(spx_word16_t *low);
+      ALLOC(low, st->frame_size, spx_word16_t);
+
+      /* Compute the two sub-bands by filtering with h0 and h1*/
+      qmf_decomp(in, h0, st->x0d, st->x1d, st->full_frame_size, QMF_ORDER, st->h0_mem, stack);
+      
+      for (i=0;i<st->frame_size;i++)
+         low[i] = SATURATE(PSHR(st->x0d[i],SIG_SHIFT),32767);
+      
+      /* Encode the narrowband part*/
+      speex_encode_native(st->st_low, low, bits);
+
+      for (i=0;i<st->frame_size;i++)
+         st->x0d[i] = SHL(low[i],SIG_SHIFT);
+   }
+   /* High-band buffering / sync with low band */
+   for (i=0;i<st->windowSize-st->frame_size;i++)
+      st->high[i] = st->high[st->frame_size+i];
+   for (i=0;i<st->frame_size;i++)
+      st->high[st->windowSize-st->frame_size+i]=SATURATE(st->x1d[i],536854528);
+
+   speex_move(st->excBuf, st->excBuf+st->frame_size, (st->bufSize-st->frame_size)*sizeof(spx_sig_t));
+
+
+   ALLOC(low_pi_gain, st->nbSubframes, spx_word32_t);
+   ALLOC(low_exc, st->frame_size, spx_word16_t);
+   speex_encoder_ctl(st->st_low, SPEEX_GET_PI_GAIN, low_pi_gain);
+   speex_encoder_ctl(st->st_low, SPEEX_GET_EXC, low_exc);
+   
+   speex_encoder_ctl(st->st_low, SPEEX_GET_LOW_MODE, &dtx);
+
+   if (dtx==0)
+      dtx=1;
+   else
+      dtx=0;
+
+   {
+      VARDECL(spx_word16_t *w_sig);
+      ALLOC(w_sig, st->windowSize, spx_word16_t);
+      /* Window for analysis */
+      for (i=0;i<st->windowSize;i++)
+         w_sig[i] = SHR(MULT16_16(SHR((spx_word32_t)(st->high[i]),SIG_SHIFT),st->window[i]),SIG_SHIFT);
+
+      /* Compute auto-correlation */
+      _spx_autocorr(w_sig, st->autocorr, st->lpcSize+1, st->windowSize);
+   }
+   st->autocorr[0] = ADD16(st->autocorr[0],MULT16_16_Q15(st->autocorr[0],st->lpc_floor)); /* Noise floor in auto-correlation domain */
+
+   /* Lag windowing: equivalent to filtering in the power-spectrum domain */
+   for (i=0;i<st->lpcSize+1;i++)
+      st->autocorr[i] = MULT16_16_Q14(st->autocorr[i],st->lagWindow[i]);
+
+   /* Levinson-Durbin */
+   _spx_lpc(st->lpc, st->autocorr, st->lpcSize);
+
+   /* LPC to LSPs (x-domain) transform */
+   roots=lpc_to_lsp (st->lpc, st->lpcSize, st->lsp, 10, LSP_DELTA1, stack);
+   if (roots!=st->lpcSize)
+   {
+      roots = lpc_to_lsp (st->lpc, st->lpcSize, st->lsp, 10, LSP_DELTA2, stack);
+      if (roots!=st->lpcSize) {
+         /*If we can't find all LSP's, do some damage control and use a flat filter*/
+         for (i=0;i<st->lpcSize;i++)
+         {
+            st->lsp[i]=LSP_SCALING*M_PI*((float)(i+1))/(st->lpcSize+1);
+         }
+      }
+   }
+
+   /* VBR code */
+   if ((st->vbr_enabled || st->vad_enabled) && !dtx)
+   {
+      float e_low=0, e_high=0;
+      float ratio;
+      if (st->abr_enabled)
+      {
+         float qual_change=0;
+         if (st->abr_drift2 * st->abr_drift > 0)
+         {
+            /* Only adapt if long-term and short-term drift are the same sign */
+            qual_change = -.00001*st->abr_drift/(1+st->abr_count);
+            if (qual_change>.1)
+               qual_change=.1;
+            if (qual_change<-.1)
+               qual_change=-.1;
+         }
+         st->vbr_quality += qual_change;
+         if (st->vbr_quality>10)
+            st->vbr_quality=10;
+         if (st->vbr_quality<0)
+            st->vbr_quality=0;
+      }
+
+
+      /*FIXME: Are the two signals (low, high) in sync? */
+      e_low = compute_rms(st->x0d, st->frame_size);
+      e_high = compute_rms(st->high, st->frame_size);
+      ratio = 2*log((1+e_high)/(1+e_low));
+      
+      speex_encoder_ctl(st->st_low, SPEEX_GET_RELATIVE_QUALITY, &st->relative_quality);
+      if (ratio<-4)
+         ratio=-4;
+      if (ratio>2)
+         ratio=2;
+      /*if (ratio>-2)*/
+      if (st->vbr_enabled) 
+      {
+         spx_int32_t modeid;
+         modeid = mode->nb_modes-1;
+         st->relative_quality+=1.0*(ratio+2);
+	 if (st->relative_quality<-1)
+            st->relative_quality=-1;
+         while (modeid)
+         {
+            int v1;
+            float thresh;
+            v1=(int)floor(st->vbr_quality);
+            if (v1==10)
+               thresh = mode->vbr_thresh[modeid][v1];
+            else
+               thresh = (st->vbr_quality-v1)   * mode->vbr_thresh[modeid][v1+1] + 
+                        (1+v1-st->vbr_quality) * mode->vbr_thresh[modeid][v1];
+            if (st->relative_quality >= thresh && st->sampling_rate*st->submodes[modeid]->bits_per_frame/st->full_frame_size <= st->vbr_max_high)
+               break;
+            modeid--;
+         }
+         speex_encoder_ctl(state, SPEEX_SET_HIGH_MODE, &modeid);
+         if (st->abr_enabled)
+         {
+            spx_int32_t bitrate;
+            speex_encoder_ctl(state, SPEEX_GET_BITRATE, &bitrate);
+            st->abr_drift+=(bitrate-st->abr_enabled);
+            st->abr_drift2 = .95*st->abr_drift2 + .05*(bitrate-st->abr_enabled);
+            st->abr_count += 1.0;
+         }
+
+      } else {
+         /* VAD only */
+         int modeid;
+         if (st->relative_quality<2.0)
+            modeid=1;
+         else
+            modeid=st->submodeSelect;
+         /*speex_encoder_ctl(state, SPEEX_SET_MODE, &mode);*/
+         st->submodeID=modeid;
+
+      }
+      /*fprintf (stderr, "%f %f\n", ratio, low_qual);*/
+   }
+
+   if (st->encode_submode)
+   {
+      speex_bits_pack(bits, 1, 1);
+      if (dtx)
+         speex_bits_pack(bits, 0, SB_SUBMODE_BITS);
+      else
+         speex_bits_pack(bits, st->submodeID, SB_SUBMODE_BITS);
+   }
+
+   /* If null mode (no transmission), just set a couple things to zero*/
+   if (dtx || st->submodes[st->submodeID] == NULL)
+   {
+      for (i=0;i<st->frame_size;i++)
+         st->exc[i]=st->sw[i]=VERY_SMALL;
+
+      for (i=0;i<st->lpcSize;i++)
+         st->mem_sw[i]=0;
+      st->first=1;
+
+      /* Final signal synthesis from excitation */
+      iir_mem2(st->exc, st->interp_qlpc, st->high, st->frame_size, st->lpcSize, st->mem_sp);
+
+#ifdef RESYNTH
+      /* Reconstruct the original */
+      fir_mem_up(st->x0d, h0, st->y0, st->full_frame_size, QMF_ORDER, st->g0_mem, stack);
+      fir_mem_up(st->high, h1, st->y1, st->full_frame_size, QMF_ORDER, st->g1_mem, stack);
+
+      for (i=0;i<st->full_frame_size;i++)
+         in[i]=SHR(st->y0[i]-st->y1[i], SIG_SHIFT-1);
+#endif
+
+      if (dtx)
+         return 0;
+      else
+         return 1;
+   }
+
+
+   /* LSP quantization */
+   SUBMODE(lsp_quant)(st->lsp, st->qlsp, st->lpcSize, bits);   
+
+   if (st->first)
+   {
+      for (i=0;i<st->lpcSize;i++)
+         st->old_lsp[i] = st->lsp[i];
+      for (i=0;i<st->lpcSize;i++)
+         st->old_qlsp[i] = st->qlsp[i];
+   }
+   
+   ALLOC(mem, st->lpcSize, spx_mem_t);
+   ALLOC(syn_resp, st->subframeSize, spx_word16_t);
+   ALLOC(innov, st->subframeSize, spx_sig_t);
+   ALLOC(target, st->subframeSize, spx_word16_t);
+
+   for (sub=0;sub<st->nbSubframes;sub++)
+   {
+      spx_sig_t *exc, *sp, *res, *sw, *innov_save=NULL;
+      spx_word16_t filter_ratio;
+      int offset;
+      spx_word32_t rl, rh;
+      spx_word16_t eh=0;
+
+      offset = st->subframeSize*sub;
+      sp=st->high+offset;
+      exc=st->exc+offset;
+      res=st->res+offset;
+      sw=st->sw+offset;
+      /* Pointer for saving innovation */
+      if (st->innov_save)
+      {
+         innov_save = st->innov_save+2*offset;
+         for (i=0;i<2*st->subframeSize;i++)
+            innov_save[i]=0;
+      }
+      
+      /* LSP interpolation (quantized and unquantized) */
+      lsp_interpolate(st->old_lsp, st->lsp, st->interp_lsp, st->lpcSize, sub, st->nbSubframes);
+      lsp_interpolate(st->old_qlsp, st->qlsp, st->interp_qlsp, st->lpcSize, sub, st->nbSubframes);
+
+      lsp_enforce_margin(st->interp_lsp, st->lpcSize, LSP_MARGIN);
+      lsp_enforce_margin(st->interp_qlsp, st->lpcSize, LSP_MARGIN);
+
+      lsp_to_lpc(st->interp_lsp, st->interp_lpc, st->lpcSize,stack);
+      lsp_to_lpc(st->interp_qlsp, st->interp_qlpc, st->lpcSize, stack);
+
+      bw_lpc(st->gamma1, st->interp_lpc, st->bw_lpc1, st->lpcSize);
+      bw_lpc(st->gamma2, st->interp_lpc, st->bw_lpc2, st->lpcSize);
+
+      /* Compute mid-band (4000 Hz for wideband) response of low-band and high-band
+         filters */
+      st->pi_gain[sub]=LPC_SCALING;
+      rh = LPC_SCALING;
+      for (i=0;i<st->lpcSize;i+=2)
+      {
+         rh += st->interp_qlpc[i+1] - st->interp_qlpc[i];
+         st->pi_gain[sub] += st->interp_qlpc[i] + st->interp_qlpc[i+1];
+      }
+      
+      rl = low_pi_gain[sub];
+#ifdef FIXED_POINT
+      filter_ratio=PDIV32_16(SHL(rl+82,2),SHR(82+rh,5));
+#else
+      filter_ratio=(rl+.01)/(rh+.01);
+#endif
+      
+      /* Compute "real excitation" */
+      fir_mem2(sp, st->interp_qlpc, exc, st->subframeSize, st->lpcSize, st->mem_sp2);
+      /* Compute energy of low-band and high-band excitation */
+
+      eh = compute_rms(exc, st->subframeSize);
+
+      if (!SUBMODE(innovation_quant)) {/* 1 for spectral folding excitation, 0 for stochastic */
+         float g;
+         spx_word16_t el;
+         el = compute_rms(st->low_innov+offset, st->subframeSize);
+
+         /* Gain to use if we want to use the low-band excitation for high-band */
+         g=eh/(1.+el);
+         
+#if 0
+         {
+            char *tmp_stack=stack;
+            float *tmp_sig;
+            float g2;
+            ALLOC(tmp_sig, st->subframeSize, spx_sig_t);
+            for (i=0;i<st->lpcSize;i++)
+               mem[i]=st->mem_sp[i];
+            iir_mem2(st->low_innov+offset, st->interp_qlpc, tmp_sig, st->subframeSize, st->lpcSize, mem);
+            g2 = compute_rms(sp, st->subframeSize)/(.01+compute_rms(tmp_sig, st->subframeSize));
+            /*fprintf (stderr, "gains: %f %f\n", g, g2);*/
+            g = g2;
+            stack = tmp_stack;
+         }
+#endif
+
+#ifdef FIXED_POINT
+         g *= filter_ratio/128.;
+#else
+         g *= filter_ratio;
+#endif
+         /*print_vec(&g, 1, "gain factor");*/
+         /* Gain quantization */
+         {
+            int quant = (int) floor(.5 + 10 + 8.0 * log((g+.0001)));
+            /*speex_warning_int("tata", quant);*/
+            if (quant<0)
+               quant=0;
+            if (quant>31)
+               quant=31;
+            speex_bits_pack(bits, quant, 5);
+         }
+
+      } else {
+         spx_word16_t gc;
+         spx_word32_t scale;
+         spx_word16_t el;
+         el = compute_rms16(low_exc+offset, st->subframeSize);
+
+         gc = PDIV32_16(MULT16_16(filter_ratio,1+eh),1+el);
+
+         /* This is a kludge that cleans up a historical bug */
+         if (st->subframeSize==80)
+            gc *= 0.70711;
+         /*printf ("%f %f %f %f\n", el, eh, filter_ratio, gc);*/
+#ifdef FIXED_POINT
+         {
+            int qgc = scal_quant(gc, gc_quant_bound, 16);
+            speex_bits_pack(bits, qgc, 4);
+            gc = MULT16_32_Q15(28626,gc_quant_bound[qgc]);
+         }
+#else
+         {
+            int qgc = (int)floor(.5+3.7*(log(gc)+0.15556));
+            if (qgc<0)
+               qgc=0;
+            if (qgc>15)
+               qgc=15;
+            speex_bits_pack(bits, qgc, 4);
+            gc = exp((1/3.7)*qgc-0.15556);
+         }         
+#endif
+         if (st->subframeSize==80)
+            gc *= 1.4142;
+
+         scale = SHL32(MULT16_16(PDIV32_16(SHL32(EXTEND32(gc),SIG_SHIFT-6),filter_ratio),(1+el)),6);
+
+         compute_impulse_response(st->interp_qlpc, st->bw_lpc1, st->bw_lpc2, syn_resp, st->subframeSize, st->lpcSize, stack);
+
+         
+         /* Reset excitation */
+         for (i=0;i<st->subframeSize;i++)
+            exc[i]=VERY_SMALL;
+         
+         /* Compute zero response (ringing) of A(z/g1) / ( A(z/g2) * Aq(z) ) */
+         for (i=0;i<st->lpcSize;i++)
+            mem[i]=st->mem_sp[i];
+         iir_mem2(exc, st->interp_qlpc, exc, st->subframeSize, st->lpcSize, mem);
+
+         for (i=0;i<st->lpcSize;i++)
+            mem[i]=st->mem_sw[i];
+         filter_mem2(exc, st->bw_lpc1, st->bw_lpc2, res, st->subframeSize, st->lpcSize, mem);
+
+         /* Compute weighted signal */
+         for (i=0;i<st->lpcSize;i++)
+            mem[i]=st->mem_sw[i];
+         filter_mem2(sp, st->bw_lpc1, st->bw_lpc2, sw, st->subframeSize, st->lpcSize, mem);
+
+         /* Compute target signal */
+         for (i=0;i<st->subframeSize;i++)
+            target[i]=PSHR32(sw[i]-res[i],SIG_SHIFT);
+
+         for (i=0;i<st->subframeSize;i++)
+           exc[i]=0;
+
+         signal_div(target, target, scale, st->subframeSize);
+
+         /* Reset excitation */
+         for (i=0;i<st->subframeSize;i++)
+            innov[i]=0;
+
+         /*print_vec(target, st->subframeSize, "\ntarget");*/
+         SUBMODE(innovation_quant)(target, st->interp_qlpc, st->bw_lpc1, st->bw_lpc2, 
+                                   SUBMODE(innovation_params), st->lpcSize, st->subframeSize, 
+                                   innov, syn_resp, bits, stack, st->complexity, SUBMODE(double_codebook));
+         /*print_vec(target, st->subframeSize, "after");*/
+
+         signal_mul(innov, innov, scale, st->subframeSize);
+
+         for (i=0;i<st->subframeSize;i++)
+            exc[i] = ADD32(exc[i], innov[i]);
+
+         if (st->innov_save)
+         {
+            for (i=0;i<st->subframeSize;i++)
+               innov_save[2*i]=innov[i];
+         }
+         
+         if (SUBMODE(double_codebook)) {
+            char *tmp_stack=stack;
+            VARDECL(spx_sig_t *innov2);
+            ALLOC(innov2, st->subframeSize, spx_sig_t);
+            for (i=0;i<st->subframeSize;i++)
+               innov2[i]=0;
+            for (i=0;i<st->subframeSize;i++)
+               target[i]*=2.5;
+            SUBMODE(innovation_quant)(target, st->interp_qlpc, st->bw_lpc1, st->bw_lpc2, 
+                                      SUBMODE(innovation_params), st->lpcSize, st->subframeSize, 
+                                      innov2, syn_resp, bits, stack, st->complexity, 0);
+            for (i=0;i<st->subframeSize;i++)
+               innov2[i]*=scale*(1/2.5)/SIG_SCALING;
+            for (i=0;i<st->subframeSize;i++)
+               exc[i] = ADD32(exc[i],innov2[i]);
+            stack = tmp_stack;
+         }
+
+      }
+
+      /*Keep the previous memory*/
+      for (i=0;i<st->lpcSize;i++)
+         mem[i]=st->mem_sp[i];
+      /* Final signal synthesis from excitation */
+      iir_mem2(exc, st->interp_qlpc, sp, st->subframeSize, st->lpcSize, st->mem_sp);
+      
+      /* Compute weighted signal again, from synthesized speech (not sure it's the right thing) */
+      filter_mem2(sp, st->bw_lpc1, st->bw_lpc2, sw, st->subframeSize, st->lpcSize, st->mem_sw);
+   }
+
+
+#ifdef RESYNTH
+   /* Reconstruct the original */
+   fir_mem_up(st->x0d, h0, st->y0, st->full_frame_size, QMF_ORDER, st->g0_mem, stack);
+   fir_mem_up(st->high, h1, st->y1, st->full_frame_size, QMF_ORDER, st->g1_mem, stack);
+
+   for (i=0;i<st->full_frame_size;i++)
+      in[i]=SHR(st->y0[i]-st->y1[i], SIG_SHIFT-1);
+#endif
+   for (i=0;i<st->lpcSize;i++)
+      st->old_lsp[i] = st->lsp[i];
+   for (i=0;i<st->lpcSize;i++)
+      st->old_qlsp[i] = st->qlsp[i];
+
+   st->first=0;
+
+   return 1;
+}
+
+
+
+
+
+void *sb_decoder_init(const SpeexMode *m)
+{
+   spx_int32_t tmp;
+   SBDecState *st;
+   const SpeexSBMode *mode;
+   st = (SBDecState*)speex_alloc(sizeof(SBDecState));
+   if (!st)
+      return NULL;
+#if defined(VAR_ARRAYS) || defined (USE_ALLOCA)
+   st->stack = NULL;
+#else
+   st->stack = (char*)speex_alloc_scratch(SB_DEC_STACK);
+#endif
+   st->mode = m;
+   mode=(const SpeexSBMode*)m->mode;
+
+   st->encode_submode = 1;
+
+
+
+
+   st->st_low = speex_decoder_init(mode->nb_mode);
+   st->full_frame_size = 2*mode->frameSize;
+   st->frame_size = mode->frameSize;
+   st->subframeSize = mode->subframeSize;
+   st->nbSubframes = mode->frameSize/mode->subframeSize;
+   st->lpcSize=mode->lpcSize;
+   speex_decoder_ctl(st->st_low, SPEEX_GET_SAMPLING_RATE, &st->sampling_rate);
+   st->sampling_rate*=2;
+   tmp=1;
+   speex_decoder_ctl(st->st_low, SPEEX_SET_WIDEBAND, &tmp);
+
+   st->submodes=mode->submodes;
+   st->submodeID=mode->defaultSubmode;
+
+   st->first=1;
+
+
+   st->x0d = (spx_sig_t*)speex_alloc((st->frame_size)*sizeof(spx_sig_t));
+   st->x1d = (spx_sig_t*)speex_alloc((st->frame_size)*sizeof(spx_sig_t));
+   st->high = (spx_sig_t*)speex_alloc((st->full_frame_size)*sizeof(spx_sig_t));
+   st->y0 = (spx_sig_t*)speex_alloc((st->full_frame_size)*sizeof(spx_sig_t));
+   st->y1 = (spx_sig_t*)speex_alloc((st->full_frame_size)*sizeof(spx_sig_t));
+
+   st->g0_mem = (spx_word32_t*)speex_alloc((QMF_ORDER)*sizeof(spx_word32_t));
+   st->g1_mem = (spx_word32_t*)speex_alloc((QMF_ORDER)*sizeof(spx_word32_t));
+
+   st->exc = (spx_sig_t*)speex_alloc((st->frame_size)*sizeof(spx_sig_t));
+   st->excBuf = (spx_sig_t*)speex_alloc((st->subframeSize)*sizeof(spx_sig_t));
+
+   st->qlsp = (spx_lsp_t*)speex_alloc((st->lpcSize)*sizeof(spx_lsp_t));
+   st->old_qlsp = (spx_lsp_t*)speex_alloc((st->lpcSize)*sizeof(spx_lsp_t));
+   st->interp_qlsp = (spx_lsp_t*)speex_alloc(st->lpcSize*sizeof(spx_lsp_t));
+   st->interp_qlpc = (spx_coef_t*)speex_alloc(st->lpcSize*sizeof(spx_coef_t));
+
+   st->pi_gain = (spx_word32_t*)speex_alloc((st->nbSubframes)*sizeof(spx_word32_t));
+   st->mem_sp = (spx_mem_t*)speex_alloc((2*st->lpcSize)*sizeof(spx_mem_t));
+   
+   st->low_innov = (spx_word32_t*)speex_alloc((st->frame_size)*sizeof(spx_word32_t));
+   speex_decoder_ctl(st->st_low, SPEEX_SET_INNOVATION_SAVE, st->low_innov);
+   st->innov_save = NULL;
+
+
+   st->lpc_enh_enabled=0;
+   st->seed = 1000;
+
+#ifdef ENABLE_VALGRIND
+   VALGRIND_MAKE_READABLE(st, (st->stack-(char*)st));
+#endif
+   return st;
+}
+
+void sb_decoder_destroy(void *state)
+{
+   SBDecState *st;
+   st = (SBDecState*)state;
+   speex_decoder_destroy(st->st_low);
+#if !(defined(VAR_ARRAYS) || defined (USE_ALLOCA))
+   speex_free_scratch(st->stack);
+#endif
+
+   speex_free(st->x0d);
+   speex_free(st->x1d);
+   speex_free(st->high);
+   speex_free(st->y0);
+   speex_free(st->y1);
+   speex_free(st->g0_mem);
+   speex_free(st->g1_mem);
+   speex_free(st->exc);
+   speex_free(st->excBuf);
+   speex_free(st->qlsp);
+   speex_free(st->old_qlsp);
+   speex_free(st->interp_qlsp);
+   speex_free(st->interp_qlpc);
+   speex_free(st->pi_gain);
+   speex_free(st->low_innov);
+   speex_free(st->mem_sp);
+
+   speex_free(state);
+}
+
+static void sb_decode_lost(SBDecState *st, spx_word16_t *out, int dtx, char *stack)
+{
+   int i;
+   int saved_modeid=0;
+
+   if (dtx)
+   {
+      saved_modeid=st->submodeID;
+      st->submodeID=1;
+   } else {
+      bw_lpc(GAMMA_SCALING*0.99, st->interp_qlpc, st->interp_qlpc, st->lpcSize);
+   }
+
+   st->first=1;
+   
+   
+   /* Final signal synthesis from excitation */
+   if (!dtx)
+   {
+      spx_word16_t low_ener;
+      low_ener = .9*compute_rms(st->exc, st->frame_size);
+      for (i=0;i<st->frame_size;i++)
+         st->exc[i] = speex_rand(low_ener, &st->seed);
+   }
+
+   for (i=0;i<st->frame_size;i++)
+      st->high[i]=st->exc[i];
+
+   iir_mem2(st->high, st->interp_qlpc, st->high, st->frame_size, st->lpcSize, 
+            st->mem_sp);
+   
+   
+   /* Reconstruct the original */
+   fir_mem_up(st->x0d, h0, st->y0, st->full_frame_size, QMF_ORDER, st->g0_mem, stack);
+   fir_mem_up(st->high, h1, st->y1, st->full_frame_size, QMF_ORDER, st->g1_mem, stack);
+
+   mix_and_saturate(st->y0, st->y1, out, st->full_frame_size);
+
+   if (dtx)
+   {
+      st->submodeID=saved_modeid;
+   }
+
+   return;
+}
+
+int sb_decode(void *state, SpeexBits *bits, void *vout)
+{
+   int i, sub;
+   SBDecState *st;
+   int wideband;
+   int ret;
+   char *stack;
+   VARDECL(spx_word32_t *low_pi_gain);
+   VARDECL(spx_word16_t *low_exc);
+   VARDECL(spx_coef_t *ak);
+   spx_int32_t dtx;
+   const SpeexSBMode *mode;
+   spx_word16_t *out = (spx_word16_t*)vout;
+   
+   st = (SBDecState*)state;
+   stack=st->stack;
+   mode = (const SpeexSBMode*)(st->mode->mode);
+
+   {
+      VARDECL(spx_word16_t *low);
+      ALLOC(low, st->frame_size, spx_word16_t);
+      
+      /* Decode the low-band */
+      ret = speex_decode_native(st->st_low, bits, low);
+      
+      for (i=0;i<st->frame_size;i++)
+         st->x0d[i] = SHL((spx_sig_t)low[i], SIG_SHIFT);
+   }
+
+   speex_decoder_ctl(st->st_low, SPEEX_GET_DTX_STATUS, &dtx);
+
+   /* If error decoding the narrowband part, propagate error */
+   if (ret!=0)
+   {
+      return ret;
+   }
+
+   if (!bits)
+   {
+      sb_decode_lost(st, out, dtx, stack);
+      return 0;
+   }
+
+   if (st->encode_submode)
+   {
+
+      /*Check "wideband bit"*/
+      if (speex_bits_remaining(bits)>0)
+         wideband = speex_bits_peek(bits);
+      else
+         wideband = 0;
+      if (wideband)
+      {
+         /*Regular wideband frame, read the submode*/
+         wideband = speex_bits_unpack_unsigned(bits, 1);
+         st->submodeID = speex_bits_unpack_unsigned(bits, SB_SUBMODE_BITS);
+      } else
+      {
+         /*Was a narrowband frame, set "null submode"*/
+         st->submodeID = 0;
+      }
+      if (st->submodeID != 0 && st->submodes[st->submodeID] == NULL)
+      {
+         speex_warning("Invalid mode encountered: corrupted stream?");
+         return -2;
+      }
+   }
+
+   /* If null mode (no transmission), just set a couple things to zero*/
+   if (st->submodes[st->submodeID] == NULL)
+   {
+      if (dtx)
+      {
+         sb_decode_lost(st, out, 1, stack);
+         return 0;
+      }
+
+      for (i=0;i<st->frame_size;i++)
+         st->exc[i]=VERY_SMALL;
+
+      st->first=1;
+
+      /* Final signal synthesis from excitation */
+      iir_mem2(st->exc, st->interp_qlpc, st->high, st->frame_size, st->lpcSize, st->mem_sp);
+
+      fir_mem_up(st->x0d, h0, st->y0, st->full_frame_size, QMF_ORDER, st->g0_mem, stack);
+      fir_mem_up(st->high, h1, st->y1, st->full_frame_size, QMF_ORDER, st->g1_mem, stack);
+
+      mix_and_saturate(st->y0, st->y1, out, st->full_frame_size);
+
+      return 0;
+
+   }
+
+   for (i=0;i<st->frame_size;i++)
+      st->exc[i]=0;
+
+   ALLOC(low_pi_gain, st->nbSubframes, spx_word32_t);
+   ALLOC(low_exc, st->frame_size, spx_word16_t);
+   speex_decoder_ctl(st->st_low, SPEEX_GET_PI_GAIN, low_pi_gain);
+   speex_decoder_ctl(st->st_low, SPEEX_GET_EXC, low_exc);
+
+   SUBMODE(lsp_unquant)(st->qlsp, st->lpcSize, bits);
+   
+   if (st->first)
+   {
+      for (i=0;i<st->lpcSize;i++)
+         st->old_qlsp[i] = st->qlsp[i];
+   }
+   
+   ALLOC(ak, st->lpcSize, spx_coef_t);
+
+   for (sub=0;sub<st->nbSubframes;sub++)
+   {
+      spx_sig_t *exc, *sp, *innov_save=NULL;
+      spx_word16_t filter_ratio;
+      spx_word16_t el=0;
+      int offset;
+      spx_word32_t rl=0,rh=0;
+      
+      offset = st->subframeSize*sub;
+      sp=st->high+offset;
+      exc=st->exc+offset;
+      /* Pointer for saving innovation */
+      if (st->innov_save)
+      {
+         innov_save = st->innov_save+2*offset;
+         for (i=0;i<2*st->subframeSize;i++)
+            innov_save[i]=0;
+      }
+      
+      /* LSP interpolation */
+      lsp_interpolate(st->old_qlsp, st->qlsp, st->interp_qlsp, st->lpcSize, sub, st->nbSubframes);
+
+      lsp_enforce_margin(st->interp_qlsp, st->lpcSize, LSP_MARGIN);
+
+      /* LSP to LPC */
+      lsp_to_lpc(st->interp_qlsp, ak, st->lpcSize, stack);
+
+      /* Calculate reponse ratio between the low and high filter in the middle
+         of the band (4000 Hz) */
+      
+         st->pi_gain[sub]=LPC_SCALING;
+         rh = LPC_SCALING;
+         for (i=0;i<st->lpcSize;i+=2)
+         {
+            rh += st->interp_qlpc[i+1] - st->interp_qlpc[i];
+            st->pi_gain[sub] += st->interp_qlpc[i] + st->interp_qlpc[i+1];
+         }
+
+         rl = low_pi_gain[sub];
+#ifdef FIXED_POINT
+         filter_ratio=PDIV32_16(SHL(rl+82,2),SHR(82+rh,5));
+#else
+         filter_ratio=(rl+.01)/(rh+.01);
+#endif
+      
+      for (i=0;i<st->subframeSize;i++)
+         exc[i]=0;
+      if (!SUBMODE(innovation_unquant))
+      {
+         float g;
+         int quant;
+
+         quant = speex_bits_unpack_unsigned(bits, 5);
+         g= exp(((float)quant-10)/8.0);
+         
+#ifdef FIXED_POINT
+         g /= filter_ratio/128.;
+#else
+         g /= filter_ratio;
+#endif
+         /* High-band excitation using the low-band excitation and a gain */
+         
+#if 0
+         for (i=0;i<st->subframeSize;i++)
+            exc[i]=mode->folding_gain*g*st->low_innov[offset+i];
+#else
+         {
+            float tmp=1;
+            /*static tmp1=0,tmp2=0;
+            static int seed=1;
+            el = compute_rms(low_innov+offset, st->subframeSize);*/
+            for (i=0;i<st->subframeSize;i++)
+            {
+               float e=tmp*g*mode->folding_gain*st->low_innov[offset+i];
+               tmp *= -1;
+               exc[i] = e;
+               /*float r = speex_rand(g*el,&seed);
+               exc[i] = .5*(r+tmp2 + e-tmp1);
+               tmp1 = e;
+               tmp2 = r;*/               
+            }
+            
+         }
+         
+#endif    
+      } else {
+         spx_word16_t gc;
+         spx_word32_t scale;
+         int qgc = speex_bits_unpack_unsigned(bits, 4);
+
+         el = compute_rms16(low_exc+offset, st->subframeSize);
+
+#ifdef FIXED_POINT
+         gc = MULT16_32_Q15(28626,gc_quant_bound[qgc]);
+#else
+         gc = exp((1/3.7)*qgc-0.15556);
+#endif
+
+         if (st->subframeSize==80)
+            gc *= 1.4142;
+
+         scale = SHL(MULT16_16(PDIV32_16(SHL(gc,SIG_SHIFT-6),filter_ratio),(1+el)),6);
+
+         SUBMODE(innovation_unquant)(exc, SUBMODE(innovation_params), st->subframeSize, 
+                                     bits, stack, &st->seed);
+
+         signal_mul(exc,exc,scale,st->subframeSize);
+
+         if (SUBMODE(double_codebook)) {
+            char *tmp_stack=stack;
+            VARDECL(spx_sig_t *innov2);
+            ALLOC(innov2, st->subframeSize, spx_sig_t);
+            for (i=0;i<st->subframeSize;i++)
+               innov2[i]=0;
+            SUBMODE(innovation_unquant)(innov2, SUBMODE(innovation_params), st->subframeSize, 
+                                        bits, stack, &st->seed);
+            for (i=0;i<st->subframeSize;i++)
+               innov2[i]*=scale/(float)SIG_SCALING*(1/2.5);
+            for (i=0;i<st->subframeSize;i++)
+               exc[i] = ADD32(exc[i],innov2[i]);
+            stack = tmp_stack;
+         }
+
+      }
+      
+      if (st->innov_save)
+      {
+         for (i=0;i<st->subframeSize;i++)
+            innov_save[2*i]=exc[i];
+      }
+      
+      for (i=0;i<st->subframeSize;i++)
+         sp[i]=st->excBuf[i];
+      iir_mem2(sp, st->interp_qlpc, sp, st->subframeSize, st->lpcSize, 
+               st->mem_sp);
+      for (i=0;i<st->subframeSize;i++)
+         st->excBuf[i]=exc[i];
+      for (i=0;i<st->lpcSize;i++)
+         st->interp_qlpc[i] = ak[i];
+
+   }
+
+   fir_mem_up(st->x0d, h0, st->y0, st->full_frame_size, QMF_ORDER, st->g0_mem, stack);
+   fir_mem_up(st->high, h1, st->y1, st->full_frame_size, QMF_ORDER, st->g1_mem, stack);
+
+   mix_and_saturate(st->y0, st->y1, out, st->full_frame_size);
+
+   for (i=0;i<st->lpcSize;i++)
+      st->old_qlsp[i] = st->qlsp[i];
+
+   st->first=0;
+
+   return 0;
+}
+
+
+int sb_encoder_ctl(void *state, int request, void *ptr)
+{
+   SBEncState *st;
+   st=(SBEncState*)state;
+   switch(request)
+   {
+   case SPEEX_GET_FRAME_SIZE:
+      (*(spx_int32_t*)ptr) = st->full_frame_size;
+      break;
+   case SPEEX_SET_HIGH_MODE:
+      st->submodeSelect = st->submodeID = (*(spx_int32_t*)ptr);
+      break;
+   case SPEEX_SET_LOW_MODE:
+      speex_encoder_ctl(st->st_low, SPEEX_SET_LOW_MODE, ptr);
+      break;
+   case SPEEX_SET_DTX:
+      speex_encoder_ctl(st->st_low, SPEEX_SET_DTX, ptr);
+      break;
+   case SPEEX_GET_DTX:
+      speex_encoder_ctl(st->st_low, SPEEX_GET_DTX, ptr);
+      break;
+   case SPEEX_GET_LOW_MODE:
+      speex_encoder_ctl(st->st_low, SPEEX_GET_LOW_MODE, ptr);
+      break;
+   case SPEEX_SET_MODE:
+      speex_encoder_ctl(st, SPEEX_SET_QUALITY, ptr);
+      break;
+   case SPEEX_SET_VBR:
+      st->vbr_enabled = (*(spx_int32_t*)ptr);
+      speex_encoder_ctl(st->st_low, SPEEX_SET_VBR, ptr);
+      break;
+   case SPEEX_GET_VBR:
+      (*(spx_int32_t*)ptr) = st->vbr_enabled;
+      break;
+   case SPEEX_SET_VAD:
+      st->vad_enabled = (*(spx_int32_t*)ptr);
+      speex_encoder_ctl(st->st_low, SPEEX_SET_VAD, ptr);
+      break;
+   case SPEEX_GET_VAD:
+      (*(spx_int32_t*)ptr) = st->vad_enabled;
+      break;
+   case SPEEX_SET_VBR_QUALITY:
+      {
+         spx_int32_t q;
+         float qual = (*(float*)ptr)+.6;
+         st->vbr_quality = (*(float*)ptr);
+         if (qual>10)
+            qual=10;
+         q=(int)floor(.5+*(float*)ptr);
+         if (q>10)
+            q=10;
+         speex_encoder_ctl(st->st_low, SPEEX_SET_VBR_QUALITY, &qual);
+         speex_encoder_ctl(state, SPEEX_SET_QUALITY, &q);
+         break;
+      }
+   case SPEEX_GET_VBR_QUALITY:
+      (*(float*)ptr) = st->vbr_quality;
+      break;
+   case SPEEX_SET_ABR:
+      st->abr_enabled = (*(spx_int32_t*)ptr);
+      st->vbr_enabled = st->abr_enabled!=0;
+      speex_encoder_ctl(st->st_low, SPEEX_SET_VBR, &st->vbr_enabled);
+      if (st->vbr_enabled) 
+      {
+         spx_int32_t i=10, rate, target;
+         float vbr_qual;
+         target = (*(spx_int32_t*)ptr);
+         while (i>=0)
+         {
+            speex_encoder_ctl(st, SPEEX_SET_QUALITY, &i);
+            speex_encoder_ctl(st, SPEEX_GET_BITRATE, &rate);
+            if (rate <= target)
+               break;
+            i--;
+         }
+         vbr_qual=i;
+         if (vbr_qual<0)
+            vbr_qual=0;
+         speex_encoder_ctl(st, SPEEX_SET_VBR_QUALITY, &vbr_qual);
+         st->abr_count=0;
+         st->abr_drift=0;
+         st->abr_drift2=0;
+      }
+      
+      break;
+   case SPEEX_GET_ABR:
+      (*(spx_int32_t*)ptr) = st->abr_enabled;
+      break;
+   case SPEEX_SET_QUALITY:
+      {
+         spx_int32_t nb_qual;
+         int quality = (*(spx_int32_t*)ptr);
+         if (quality < 0)
+            quality = 0;
+         if (quality > 10)
+            quality = 10;
+         st->submodeSelect = st->submodeID = ((const SpeexSBMode*)(st->mode->mode))->quality_map[quality];
+         nb_qual = ((const SpeexSBMode*)(st->mode->mode))->low_quality_map[quality];
+         speex_encoder_ctl(st->st_low, SPEEX_SET_MODE, &nb_qual);
+      }
+      break;
+   case SPEEX_SET_COMPLEXITY:
+      speex_encoder_ctl(st->st_low, SPEEX_SET_COMPLEXITY, ptr);
+      st->complexity = (*(spx_int32_t*)ptr);
+      if (st->complexity<1)
+         st->complexity=1;
+      break;
+   case SPEEX_GET_COMPLEXITY:
+      (*(spx_int32_t*)ptr) = st->complexity;
+      break;
+   case SPEEX_SET_BITRATE:
+      {
+         spx_int32_t i=10;
+         spx_int32_t rate, target;
+         target = (*(spx_int32_t*)ptr);
+         while (i>=0)
+         {
+            speex_encoder_ctl(st, SPEEX_SET_QUALITY, &i);
+            speex_encoder_ctl(st, SPEEX_GET_BITRATE, &rate);
+            if (rate <= target)
+               break;
+            i--;
+         }
+      }
+      break;
+   case SPEEX_GET_BITRATE:
+      speex_encoder_ctl(st->st_low, request, ptr);
+      /*fprintf (stderr, "before: %d\n", (*(int*)ptr));*/
+      if (st->submodes[st->submodeID])
+         (*(spx_int32_t*)ptr) += st->sampling_rate*SUBMODE(bits_per_frame)/st->full_frame_size;
+      else
+         (*(spx_int32_t*)ptr) += st->sampling_rate*(SB_SUBMODE_BITS+1)/st->full_frame_size;
+      /*fprintf (stderr, "after: %d\n", (*(int*)ptr));*/
+      break;
+   case SPEEX_SET_SAMPLING_RATE:
+      {
+         spx_int32_t tmp=(*(spx_int32_t*)ptr);
+         st->sampling_rate = tmp;
+         tmp>>=1;
+         speex_encoder_ctl(st->st_low, SPEEX_SET_SAMPLING_RATE, &tmp);
+      }
+      break;
+   case SPEEX_GET_SAMPLING_RATE:
+      (*(spx_int32_t*)ptr)=st->sampling_rate;
+      break;
+   case SPEEX_RESET_STATE:
+      {
+         int i;
+         st->first = 1;
+         for (i=0;i<st->lpcSize;i++)
+            st->lsp[i]=(M_PI*((float)(i+1)))/(st->lpcSize+1);
+         for (i=0;i<st->lpcSize;i++)
+            st->mem_sw[i]=st->mem_sp[i]=st->mem_sp2[i]=0;
+         for (i=0;i<st->bufSize;i++)
+            st->excBuf[i]=0;
+         for (i=0;i<QMF_ORDER;i++)
+            st->h0_mem[i]=st->h1_mem[i]=st->g0_mem[i]=st->g1_mem[i]=0;
+      }
+      break;
+   case SPEEX_SET_SUBMODE_ENCODING:
+      st->encode_submode = (*(spx_int32_t*)ptr);
+      speex_encoder_ctl(st->st_low, SPEEX_SET_SUBMODE_ENCODING, &ptr);
+      break;
+   case SPEEX_GET_SUBMODE_ENCODING:
+      (*(spx_int32_t*)ptr) = st->encode_submode;
+      break;
+   case SPEEX_GET_LOOKAHEAD:
+      speex_encoder_ctl(st->st_low, SPEEX_GET_LOOKAHEAD, ptr);
+      (*(spx_int32_t*)ptr) = 2*(*(spx_int32_t*)ptr) + QMF_ORDER - 1;
+      break;
+   case SPEEX_SET_PLC_TUNING:
+      speex_encoder_ctl(st->st_low, SPEEX_SET_PLC_TUNING, ptr);
+      break;
+   case SPEEX_GET_PLC_TUNING:
+      speex_encoder_ctl(st->st_low, SPEEX_GET_PLC_TUNING, ptr);
+      break;
+   case SPEEX_SET_VBR_MAX_BITRATE:
+      {
+         st->vbr_max = (*(spx_int32_t*)ptr);
+         if (SPEEX_SET_VBR_MAX_BITRATE<1)
+         {
+            speex_encoder_ctl(st->st_low, SPEEX_SET_VBR_MAX_BITRATE, &st->vbr_max);
+            st->vbr_max_high = 17600;
+         } else {
+            spx_int32_t low_rate;
+            if (st->vbr_max >= 42200)
+            {
+               st->vbr_max_high = 17600;
+            } else if (st->vbr_max >= 27800)
+            {
+               st->vbr_max_high = 9600;
+            } else if (st->vbr_max > 20600)
+            {
+               st->vbr_max_high = 5600;
+            } else {
+               st->vbr_max_high = 1800;
+            }
+            if (st->subframeSize==80)
+               st->vbr_max_high = 1800;
+            low_rate = st->vbr_max - st->vbr_max_high;
+            speex_encoder_ctl(st->st_low, SPEEX_SET_VBR_MAX_BITRATE, &low_rate);
+         }
+      }
+      break;
+   case SPEEX_GET_VBR_MAX_BITRATE:
+      (*(spx_int32_t*)ptr) = st->vbr_max;
+      break;
+   case SPEEX_SET_HIGHPASS:
+      speex_encoder_ctl(st->st_low, SPEEX_SET_HIGHPASS, ptr);
+      break;
+   case SPEEX_GET_HIGHPASS:
+      speex_encoder_ctl(st->st_low, SPEEX_GET_HIGHPASS, ptr);
+      break;
+
+
+   /* This is all internal stuff past this point */
+   case SPEEX_GET_PI_GAIN:
+      {
+         int i;
+         spx_word32_t *g = (spx_word32_t*)ptr;
+         for (i=0;i<st->nbSubframes;i++)
+            g[i]=st->pi_gain[i];
+      }
+      break;
+   case SPEEX_GET_EXC:
+      {
+         int i;
+         spx_sig_t *e = (spx_sig_t*)ptr;
+         for (i=0;i<st->full_frame_size;i++)
+            e[i]=0;
+         for (i=0;i<st->frame_size;i++)
+            e[2*i]=2*st->exc[i];
+      }
+      break;
+   case SPEEX_GET_INNOV:
+      {
+         int i;
+         spx_sig_t *e = (spx_sig_t*)ptr;
+         for (i=0;i<st->full_frame_size;i++)
+            e[i]=0;
+         for (i=0;i<st->frame_size;i++)
+            e[2*i]=2*st->exc[i];
+      }
+      break;
+   case SPEEX_GET_RELATIVE_QUALITY:
+      (*(float*)ptr)=st->relative_quality;
+      break;
+   case SPEEX_SET_INNOVATION_SAVE:
+      st->innov_save = (spx_sig_t*)ptr;
+      break;
+   case SPEEX_SET_WIDEBAND:
+      speex_encoder_ctl(st->st_low, SPEEX_SET_WIDEBAND, ptr);
+      break;
+
+   default:
+      speex_warning_int("Unknown nb_ctl request: ", request);
+      return -1;
+   }
+   return 0;
+}
+
+int sb_decoder_ctl(void *state, int request, void *ptr)
+{
+   SBDecState *st;
+   st=(SBDecState*)state;
+   switch(request)
+   {
+   case SPEEX_SET_HIGH_MODE:
+      st->submodeID = (*(spx_int32_t*)ptr);
+      break;
+   case SPEEX_SET_LOW_MODE:
+      speex_decoder_ctl(st->st_low, SPEEX_SET_LOW_MODE, ptr);
+      break;
+   case SPEEX_GET_LOW_MODE:
+      speex_decoder_ctl(st->st_low, SPEEX_GET_LOW_MODE, ptr);
+      break;
+   case SPEEX_GET_FRAME_SIZE:
+      (*(spx_int32_t*)ptr) = st->full_frame_size;
+      break;
+   case SPEEX_SET_ENH:
+      speex_decoder_ctl(st->st_low, request, ptr);
+      st->lpc_enh_enabled = *((spx_int32_t*)ptr);
+      break;
+   case SPEEX_GET_ENH:
+      *((spx_int32_t*)ptr) = st->lpc_enh_enabled;
+      break;
+   case SPEEX_SET_MODE:
+   case SPEEX_SET_QUALITY:
+      {
+         spx_int32_t nb_qual;
+         int quality = (*(spx_int32_t*)ptr);
+         if (quality < 0)
+            quality = 0;
+         if (quality > 10)
+            quality = 10;
+         st->submodeID = ((const SpeexSBMode*)(st->mode->mode))->quality_map[quality];
+         nb_qual = ((const SpeexSBMode*)(st->mode->mode))->low_quality_map[quality];
+         speex_decoder_ctl(st->st_low, SPEEX_SET_MODE, &nb_qual);
+      }
+      break;
+   case SPEEX_GET_BITRATE:
+      speex_decoder_ctl(st->st_low, request, ptr);
+      if (st->submodes[st->submodeID])
+         (*(spx_int32_t*)ptr) += st->sampling_rate*SUBMODE(bits_per_frame)/st->full_frame_size;
+      else
+         (*(spx_int32_t*)ptr) += st->sampling_rate*(SB_SUBMODE_BITS+1)/st->full_frame_size;
+      break;
+   case SPEEX_SET_SAMPLING_RATE:
+      {
+         spx_int32_t tmp=(*(spx_int32_t*)ptr);
+         st->sampling_rate = tmp;
+         tmp>>=1;
+         speex_decoder_ctl(st->st_low, SPEEX_SET_SAMPLING_RATE, &tmp);
+      }
+      break;
+   case SPEEX_GET_SAMPLING_RATE:
+      (*(spx_int32_t*)ptr)=st->sampling_rate;
+      break;
+   case SPEEX_SET_HANDLER:
+      speex_decoder_ctl(st->st_low, SPEEX_SET_HANDLER, ptr);
+      break;
+   case SPEEX_SET_USER_HANDLER:
+      speex_decoder_ctl(st->st_low, SPEEX_SET_USER_HANDLER, ptr);
+      break;
+   case SPEEX_RESET_STATE:
+      {
+         int i;
+         for (i=0;i<2*st->lpcSize;i++)
+            st->mem_sp[i]=0;
+         for (i=0;i<QMF_ORDER;i++)
+            st->g0_mem[i]=st->g1_mem[i]=0;
+      }
+      break;
+   case SPEEX_SET_SUBMODE_ENCODING:
+      st->encode_submode = (*(spx_int32_t*)ptr);
+      speex_decoder_ctl(st->st_low, SPEEX_SET_SUBMODE_ENCODING, &ptr);
+      break;
+   case SPEEX_GET_SUBMODE_ENCODING:
+      (*(spx_int32_t*)ptr) = st->encode_submode;
+      break;
+   case SPEEX_GET_LOOKAHEAD:
+      speex_decoder_ctl(st->st_low, SPEEX_GET_LOOKAHEAD, ptr);
+      (*(spx_int32_t*)ptr) = 2*(*(spx_int32_t*)ptr);
+      break;
+   case SPEEX_SET_HIGHPASS:
+      speex_decoder_ctl(st->st_low, SPEEX_SET_HIGHPASS, ptr);
+      break;
+   case SPEEX_GET_HIGHPASS:
+      speex_decoder_ctl(st->st_low, SPEEX_GET_HIGHPASS, ptr);
+      break;
+
+   case SPEEX_GET_PI_GAIN:
+      {
+         int i;
+         spx_word32_t *g = (spx_word32_t*)ptr;
+         for (i=0;i<st->nbSubframes;i++)
+            g[i]=st->pi_gain[i];
+      }
+      break;
+   case SPEEX_GET_EXC:
+      {
+         int i;
+         spx_sig_t *e = (spx_sig_t*)ptr;
+         for (i=0;i<st->full_frame_size;i++)
+            e[i]=0;
+         for (i=0;i<st->frame_size;i++)
+            e[2*i]=2*st->exc[i];
+      }
+      break;
+   case SPEEX_GET_INNOV:
+      {
+         int i;
+         spx_sig_t *e = (spx_sig_t*)ptr;
+         for (i=0;i<st->full_frame_size;i++)
+            e[i]=0;
+         for (i=0;i<st->frame_size;i++)
+            e[2*i]=2*st->exc[i];
+      }
+      break;
+   case SPEEX_GET_DTX_STATUS:
+      speex_decoder_ctl(st->st_low, SPEEX_GET_DTX_STATUS, ptr);
+      break;
+   case SPEEX_SET_INNOVATION_SAVE:
+      st->innov_save = (spx_sig_t*)ptr;
+      break;
+   case SPEEX_SET_WIDEBAND:
+      speex_decoder_ctl(st->st_low, SPEEX_SET_WIDEBAND, ptr);
+      break;
+
+   default:
+      speex_warning_int("Unknown nb_ctl request: ", request);
+      return -1;
+   }
+   return 0;
+}
+
+#endif
+

Added: freeswitch/trunk/libs/speex/libspeex/sb_celp.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/sb_celp.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,176 @@
+/* Copyright (C) 2002-2006 Jean-Marc Valin */
+/**
+   @file sb_celp.h
+   @brief Sub-band CELP mode used for wideband encoding
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifndef SB_CELP_H
+#define SB_CELP_H
+
+#include "modes.h"
+#include <speex/speex_bits.h>
+#include "nb_celp.h"
+
+/**Structure representing the full state of the sub-band encoder*/
+typedef struct SBEncState {
+   const SpeexMode *mode;         /**< Pointer to the mode (containing for vtable info) */
+   void *st_low;                  /**< State of the low-band (narrowband) encoder */
+   int    full_frame_size;        /**< Length of full-band frames*/
+   int    frame_size;             /**< Length of high-band frames*/
+   int    subframeSize;           /**< Length of high-band sub-frames*/
+   int    nbSubframes;            /**< Number of high-band sub-frames*/
+   int    windowSize;             /**< Length of high-band LPC window*/
+   int    lpcSize;                /**< Order of high-band LPC analysis */
+   int    bufSize;                /**< Buffer size */
+   int    first;                  /**< First frame? */
+   float  lag_factor;             /**< Lag-windowing control parameter */
+   spx_word16_t  lpc_floor;       /**< Controls LPC analysis noise floor */
+   spx_word16_t  gamma1;          /**< Perceptual weighting coef 1 */
+   spx_word16_t  gamma2;          /**< Perceptual weighting coef 2 */
+
+   char  *stack;                  /**< Temporary allocation stack */
+   spx_sig_t *x0d, *x1d;          /**< QMF filter signals*/
+   spx_sig_t *high;               /**< High-band signal (buffer) */
+   spx_sig_t *y0, *y1;            /**< QMF synthesis signals */
+   spx_word16_t *h0_mem, *h1_mem;
+   spx_word32_t *g0_mem, *g1_mem; /**< QMF memories */
+
+   spx_sig_t *excBuf;             /**< High-band excitation */
+   spx_sig_t *exc;                /**< High-band excitation (for QMF only)*/
+   spx_sig_t *res;                /**< Zero-input response (ringing) */
+   spx_sig_t *sw;                 /**< Perceptually weighted signal */
+   const spx_word16_t *window;    /**< LPC analysis window */
+   spx_word16_t *lagWindow;       /**< Auto-correlation window */
+   spx_word16_t *autocorr;        /**< Auto-correlation (for LPC analysis) */
+   spx_coef_t *lpc;               /**< LPC coefficients */
+   spx_lsp_t *lsp;                /**< LSP coefficients */
+   spx_lsp_t *qlsp;               /**< Quantized LSPs */
+   spx_lsp_t *old_lsp;            /**< LSPs of previous frame */
+   spx_lsp_t *old_qlsp;           /**< Quantized LSPs of previous frame */
+   spx_lsp_t *interp_lsp;         /**< Interpolated LSPs for current sub-frame */
+   spx_lsp_t *interp_qlsp;        /**< Interpolated quantized LSPs for current sub-frame */
+   spx_coef_t *interp_lpc;        /**< Interpolated LPCs for current sub-frame */
+   spx_coef_t *interp_qlpc;       /**< Interpolated quantized LPCs for current sub-frame */
+   spx_coef_t *bw_lpc1;           /**< Bandwidth-expanded version of LPCs (#1) */
+   spx_coef_t *bw_lpc2;           /**< Bandwidth-expanded version of LPCs (#2) */
+
+   spx_mem_t *mem_sp;             /**< Synthesis signal memory */
+   spx_mem_t *mem_sp2;
+   spx_mem_t *mem_sw;             /**< Perceptual signal memory */
+   spx_word32_t *pi_gain;
+   spx_sig_t *innov_save;         /**< If non-NULL, innovation is copied here */
+   spx_sig_t *low_innov;          /**< Lower-band innovation is copied here magically */
+
+   float  vbr_quality;            /**< Quality setting for VBR encoding */
+   int    vbr_enabled;            /**< 1 for enabling VBR, 0 otherwise */
+   spx_int32_t vbr_max;           /**< Max bit-rate allowed in VBR mode (total) */
+   spx_int32_t vbr_max_high;      /**< Max bit-rate allowed in VBR mode for the high-band */
+   spx_int32_t abr_enabled;       /**< ABR setting (in bps), 0 if off */
+   float  abr_drift;
+   float  abr_drift2;
+   float  abr_count;
+   int    vad_enabled;            /**< 1 for enabling VAD, 0 otherwise */
+   float  relative_quality;
+
+   int    encode_submode;
+   const SpeexSubmode * const *submodes;
+   int    submodeID;
+   int    submodeSelect;
+   int    complexity;
+   spx_int32_t sampling_rate;
+
+} SBEncState;
+
+
+/**Structure representing the full state of the sub-band decoder*/
+typedef struct SBDecState {
+   const SpeexMode *mode;            /**< Pointer to the mode (containing for vtable info) */
+   void *st_low;               /**< State of the low-band (narrowband) encoder */
+   int    full_frame_size;
+   int    frame_size;
+   int    subframeSize;
+   int    nbSubframes;
+   int    lpcSize;
+   int    first;
+   spx_int32_t sampling_rate;
+   int    lpc_enh_enabled;
+
+   char  *stack;
+   spx_sig_t *x0d, *x1d;
+   spx_sig_t *high;
+   spx_sig_t *y0, *y1;
+   spx_word32_t *g0_mem, *g1_mem;
+
+   spx_sig_t *exc;
+   spx_sig_t *excBuf;
+   spx_lsp_t *qlsp;
+   spx_lsp_t *old_qlsp;
+   spx_lsp_t *interp_qlsp;
+   spx_coef_t *interp_qlpc;
+
+   spx_mem_t *mem_sp;
+   spx_word32_t *pi_gain;
+   spx_sig_t *innov_save;      /** If non-NULL, innovation is copied here */
+   spx_sig_t *low_innov;       /** Lower-band innovation is copied here magically */
+   
+   spx_int32_t seed;
+
+   int    encode_submode;
+   const SpeexSubmode * const *submodes;
+   int    submodeID;
+} SBDecState;
+
+
+/**Initializes encoder state*/
+void *sb_encoder_init(const SpeexMode *m);
+
+/**De-allocates encoder state resources*/
+void sb_encoder_destroy(void *state);
+
+/**Encodes one frame*/
+int sb_encode(void *state, void *in, SpeexBits *bits);
+
+
+/**Initializes decoder state*/
+void *sb_decoder_init(const SpeexMode *m);
+
+/**De-allocates decoder state resources*/
+void sb_decoder_destroy(void *state);
+
+/**Decodes one frame*/
+int sb_decode(void *state, SpeexBits *bits, void *out);
+
+int sb_encoder_ctl(void *state, int request, void *ptr);
+
+int sb_decoder_ctl(void *state, int request, void *ptr);
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/smallft.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/smallft.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,1260 @@
+/********************************************************************
+ *                                                                  *
+ * THIS FILE IS PART OF THE OggVorbis SOFTWARE CODEC SOURCE CODE.   *
+ * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS     *
+ * GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE *
+ * IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING.       *
+ *                                                                  *
+ * THE OggVorbis SOURCE CODE IS (C) COPYRIGHT 1994-2001             *
+ * by the XIPHOPHORUS Company http://www.xiph.org/                  *
+ *                                                                  *
+ ********************************************************************
+
+ function: *unnormalized* fft transform
+ last mod: $Id: smallft.c,v 1.19 2003/10/08 05:12:37 jm Exp $
+
+ ********************************************************************/
+
+/* FFT implementation from OggSquish, minus cosine transforms,
+ * minus all but radix 2/4 case.  In Vorbis we only need this
+ * cut-down version.
+ *
+ * To do more than just power-of-two sized vectors, see the full
+ * version I wrote for NetLib.
+ *
+ * Note that the packing is a little strange; rather than the FFT r/i
+ * packing following R_0, I_n, R_1, I_1, R_2, I_2 ... R_n-1, I_n-1,
+ * it follows R_0, R_1, I_1, R_2, I_2 ... R_n-1, I_n-1, I_n like the
+ * FORTRAN version
+ */
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <math.h>
+#include "smallft.h"
+#include "misc.h"
+
+static void drfti1(int n, float *wa, int *ifac){
+  static int ntryh[4] = { 4,2,3,5 };
+  static float tpi = 6.28318530717958648f;
+  float arg,argh,argld,fi;
+  int ntry=0,i,j=-1;
+  int k1, l1, l2, ib;
+  int ld, ii, ip, is, nq, nr;
+  int ido, ipm, nfm1;
+  int nl=n;
+  int nf=0;
+
+ L101:
+  j++;
+  if (j < 4)
+    ntry=ntryh[j];
+  else
+    ntry+=2;
+
+ L104:
+  nq=nl/ntry;
+  nr=nl-ntry*nq;
+  if (nr!=0) goto L101;
+
+  nf++;
+  ifac[nf+1]=ntry;
+  nl=nq;
+  if(ntry!=2)goto L107;
+  if(nf==1)goto L107;
+
+  for (i=1;i<nf;i++){
+    ib=nf-i+1;
+    ifac[ib+1]=ifac[ib];
+  }
+  ifac[2] = 2;
+
+ L107:
+  if(nl!=1)goto L104;
+  ifac[0]=n;
+  ifac[1]=nf;
+  argh=tpi/n;
+  is=0;
+  nfm1=nf-1;
+  l1=1;
+
+  if(nfm1==0)return;
+
+  for (k1=0;k1<nfm1;k1++){
+    ip=ifac[k1+2];
+    ld=0;
+    l2=l1*ip;
+    ido=n/l2;
+    ipm=ip-1;
+
+    for (j=0;j<ipm;j++){
+      ld+=l1;
+      i=is;
+      argld=(float)ld*argh;
+      fi=0.f;
+      for (ii=2;ii<ido;ii+=2){
+	fi+=1.f;
+	arg=fi*argld;
+	wa[i++]=cos(arg);
+	wa[i++]=sin(arg);
+      }
+      is+=ido;
+    }
+    l1=l2;
+  }
+}
+
+static void fdrffti(int n, float *wsave, int *ifac){
+
+  if (n == 1) return;
+  drfti1(n, wsave+n, ifac);
+}
+
+static void dradf2(int ido,int l1,float *cc,float *ch,float *wa1){
+  int i,k;
+  float ti2,tr2;
+  int t0,t1,t2,t3,t4,t5,t6;
+
+  t1=0;
+  t0=(t2=l1*ido);
+  t3=ido<<1;
+  for(k=0;k<l1;k++){
+    ch[t1<<1]=cc[t1]+cc[t2];
+    ch[(t1<<1)+t3-1]=cc[t1]-cc[t2];
+    t1+=ido;
+    t2+=ido;
+  }
+    
+  if(ido<2)return;
+  if(ido==2)goto L105;
+
+  t1=0;
+  t2=t0;
+  for(k=0;k<l1;k++){
+    t3=t2;
+    t4=(t1<<1)+(ido<<1);
+    t5=t1;
+    t6=t1+t1;
+    for(i=2;i<ido;i+=2){
+      t3+=2;
+      t4-=2;
+      t5+=2;
+      t6+=2;
+      tr2=wa1[i-2]*cc[t3-1]+wa1[i-1]*cc[t3];
+      ti2=wa1[i-2]*cc[t3]-wa1[i-1]*cc[t3-1];
+      ch[t6]=cc[t5]+ti2;
+      ch[t4]=ti2-cc[t5];
+      ch[t6-1]=cc[t5-1]+tr2;
+      ch[t4-1]=cc[t5-1]-tr2;
+    }
+    t1+=ido;
+    t2+=ido;
+  }
+
+  if(ido%2==1)return;
+
+ L105:
+  t3=(t2=(t1=ido)-1);
+  t2+=t0;
+  for(k=0;k<l1;k++){
+    ch[t1]=-cc[t2];
+    ch[t1-1]=cc[t3];
+    t1+=ido<<1;
+    t2+=ido;
+    t3+=ido;
+  }
+}
+
+static void dradf4(int ido,int l1,float *cc,float *ch,float *wa1,
+	    float *wa2,float *wa3){
+  static float hsqt2 = .70710678118654752f;
+  int i,k,t0,t1,t2,t3,t4,t5,t6;
+  float ci2,ci3,ci4,cr2,cr3,cr4,ti1,ti2,ti3,ti4,tr1,tr2,tr3,tr4;
+  t0=l1*ido;
+  
+  t1=t0;
+  t4=t1<<1;
+  t2=t1+(t1<<1);
+  t3=0;
+
+  for(k=0;k<l1;k++){
+    tr1=cc[t1]+cc[t2];
+    tr2=cc[t3]+cc[t4];
+
+    ch[t5=t3<<2]=tr1+tr2;
+    ch[(ido<<2)+t5-1]=tr2-tr1;
+    ch[(t5+=(ido<<1))-1]=cc[t3]-cc[t4];
+    ch[t5]=cc[t2]-cc[t1];
+
+    t1+=ido;
+    t2+=ido;
+    t3+=ido;
+    t4+=ido;
+  }
+
+  if(ido<2)return;
+  if(ido==2)goto L105;
+
+
+  t1=0;
+  for(k=0;k<l1;k++){
+    t2=t1;
+    t4=t1<<2;
+    t5=(t6=ido<<1)+t4;
+    for(i=2;i<ido;i+=2){
+      t3=(t2+=2);
+      t4+=2;
+      t5-=2;
+
+      t3+=t0;
+      cr2=wa1[i-2]*cc[t3-1]+wa1[i-1]*cc[t3];
+      ci2=wa1[i-2]*cc[t3]-wa1[i-1]*cc[t3-1];
+      t3+=t0;
+      cr3=wa2[i-2]*cc[t3-1]+wa2[i-1]*cc[t3];
+      ci3=wa2[i-2]*cc[t3]-wa2[i-1]*cc[t3-1];
+      t3+=t0;
+      cr4=wa3[i-2]*cc[t3-1]+wa3[i-1]*cc[t3];
+      ci4=wa3[i-2]*cc[t3]-wa3[i-1]*cc[t3-1];
+
+      tr1=cr2+cr4;
+      tr4=cr4-cr2;
+      ti1=ci2+ci4;
+      ti4=ci2-ci4;
+
+      ti2=cc[t2]+ci3;
+      ti3=cc[t2]-ci3;
+      tr2=cc[t2-1]+cr3;
+      tr3=cc[t2-1]-cr3;
+
+      ch[t4-1]=tr1+tr2;
+      ch[t4]=ti1+ti2;
+
+      ch[t5-1]=tr3-ti4;
+      ch[t5]=tr4-ti3;
+
+      ch[t4+t6-1]=ti4+tr3;
+      ch[t4+t6]=tr4+ti3;
+
+      ch[t5+t6-1]=tr2-tr1;
+      ch[t5+t6]=ti1-ti2;
+    }
+    t1+=ido;
+  }
+  if(ido&1)return;
+
+ L105:
+  
+  t2=(t1=t0+ido-1)+(t0<<1);
+  t3=ido<<2;
+  t4=ido;
+  t5=ido<<1;
+  t6=ido;
+
+  for(k=0;k<l1;k++){
+    ti1=-hsqt2*(cc[t1]+cc[t2]);
+    tr1=hsqt2*(cc[t1]-cc[t2]);
+
+    ch[t4-1]=tr1+cc[t6-1];
+    ch[t4+t5-1]=cc[t6-1]-tr1;
+
+    ch[t4]=ti1-cc[t1+t0];
+    ch[t4+t5]=ti1+cc[t1+t0];
+
+    t1+=ido;
+    t2+=ido;
+    t4+=t3;
+    t6+=ido;
+  }
+}
+
+static void dradfg(int ido,int ip,int l1,int idl1,float *cc,float *c1,
+                          float *c2,float *ch,float *ch2,float *wa){
+
+  static float tpi=6.283185307179586f;
+  int idij,ipph,i,j,k,l,ic,ik,is;
+  int t0,t1,t2,t3,t4,t5,t6,t7,t8,t9,t10;
+  float dc2,ai1,ai2,ar1,ar2,ds2;
+  int nbd;
+  float dcp,arg,dsp,ar1h,ar2h;
+  int idp2,ipp2;
+  
+  arg=tpi/(float)ip;
+  dcp=cos(arg);
+  dsp=sin(arg);
+  ipph=(ip+1)>>1;
+  ipp2=ip;
+  idp2=ido;
+  nbd=(ido-1)>>1;
+  t0=l1*ido;
+  t10=ip*ido;
+
+  if(ido==1)goto L119;
+  for(ik=0;ik<idl1;ik++)ch2[ik]=c2[ik];
+
+  t1=0;
+  for(j=1;j<ip;j++){
+    t1+=t0;
+    t2=t1;
+    for(k=0;k<l1;k++){
+      ch[t2]=c1[t2];
+      t2+=ido;
+    }
+  }
+
+  is=-ido;
+  t1=0;
+  if(nbd>l1){
+    for(j=1;j<ip;j++){
+      t1+=t0;
+      is+=ido;
+      t2= -ido+t1;
+      for(k=0;k<l1;k++){
+        idij=is-1;
+        t2+=ido;
+        t3=t2;
+        for(i=2;i<ido;i+=2){
+          idij+=2;
+          t3+=2;
+          ch[t3-1]=wa[idij-1]*c1[t3-1]+wa[idij]*c1[t3];
+          ch[t3]=wa[idij-1]*c1[t3]-wa[idij]*c1[t3-1];
+        }
+      }
+    }
+  }else{
+
+    for(j=1;j<ip;j++){
+      is+=ido;
+      idij=is-1;
+      t1+=t0;
+      t2=t1;
+      for(i=2;i<ido;i+=2){
+        idij+=2;
+        t2+=2;
+        t3=t2;
+        for(k=0;k<l1;k++){
+          ch[t3-1]=wa[idij-1]*c1[t3-1]+wa[idij]*c1[t3];
+          ch[t3]=wa[idij-1]*c1[t3]-wa[idij]*c1[t3-1];
+          t3+=ido;
+        }
+      }
+    }
+  }
+
+  t1=0;
+  t2=ipp2*t0;
+  if(nbd<l1){
+    for(j=1;j<ipph;j++){
+      t1+=t0;
+      t2-=t0;
+      t3=t1;
+      t4=t2;
+      for(i=2;i<ido;i+=2){
+        t3+=2;
+        t4+=2;
+        t5=t3-ido;
+        t6=t4-ido;
+        for(k=0;k<l1;k++){
+          t5+=ido;
+          t6+=ido;
+          c1[t5-1]=ch[t5-1]+ch[t6-1];
+          c1[t6-1]=ch[t5]-ch[t6];
+          c1[t5]=ch[t5]+ch[t6];
+          c1[t6]=ch[t6-1]-ch[t5-1];
+        }
+      }
+    }
+  }else{
+    for(j=1;j<ipph;j++){
+      t1+=t0;
+      t2-=t0;
+      t3=t1;
+      t4=t2;
+      for(k=0;k<l1;k++){
+        t5=t3;
+        t6=t4;
+        for(i=2;i<ido;i+=2){
+          t5+=2;
+          t6+=2;
+          c1[t5-1]=ch[t5-1]+ch[t6-1];
+          c1[t6-1]=ch[t5]-ch[t6];
+          c1[t5]=ch[t5]+ch[t6];
+          c1[t6]=ch[t6-1]-ch[t5-1];
+        }
+        t3+=ido;
+        t4+=ido;
+      }
+    }
+  }
+
+L119:
+  for(ik=0;ik<idl1;ik++)c2[ik]=ch2[ik];
+
+  t1=0;
+  t2=ipp2*idl1;
+  for(j=1;j<ipph;j++){
+    t1+=t0;
+    t2-=t0;
+    t3=t1-ido;
+    t4=t2-ido;
+    for(k=0;k<l1;k++){
+      t3+=ido;
+      t4+=ido;
+      c1[t3]=ch[t3]+ch[t4];
+      c1[t4]=ch[t4]-ch[t3];
+    }
+  }
+
+  ar1=1.f;
+  ai1=0.f;
+  t1=0;
+  t2=ipp2*idl1;
+  t3=(ip-1)*idl1;
+  for(l=1;l<ipph;l++){
+    t1+=idl1;
+    t2-=idl1;
+    ar1h=dcp*ar1-dsp*ai1;
+    ai1=dcp*ai1+dsp*ar1;
+    ar1=ar1h;
+    t4=t1;
+    t5=t2;
+    t6=t3;
+    t7=idl1;
+
+    for(ik=0;ik<idl1;ik++){
+      ch2[t4++]=c2[ik]+ar1*c2[t7++];
+      ch2[t5++]=ai1*c2[t6++];
+    }
+
+    dc2=ar1;
+    ds2=ai1;
+    ar2=ar1;
+    ai2=ai1;
+
+    t4=idl1;
+    t5=(ipp2-1)*idl1;
+    for(j=2;j<ipph;j++){
+      t4+=idl1;
+      t5-=idl1;
+
+      ar2h=dc2*ar2-ds2*ai2;
+      ai2=dc2*ai2+ds2*ar2;
+      ar2=ar2h;
+
+      t6=t1;
+      t7=t2;
+      t8=t4;
+      t9=t5;
+      for(ik=0;ik<idl1;ik++){
+        ch2[t6++]+=ar2*c2[t8++];
+        ch2[t7++]+=ai2*c2[t9++];
+      }
+    }
+  }
+
+  t1=0;
+  for(j=1;j<ipph;j++){
+    t1+=idl1;
+    t2=t1;
+    for(ik=0;ik<idl1;ik++)ch2[ik]+=c2[t2++];
+  }
+
+  if(ido<l1)goto L132;
+
+  t1=0;
+  t2=0;
+  for(k=0;k<l1;k++){
+    t3=t1;
+    t4=t2;
+    for(i=0;i<ido;i++)cc[t4++]=ch[t3++];
+    t1+=ido;
+    t2+=t10;
+  }
+
+  goto L135;
+
+ L132:
+  for(i=0;i<ido;i++){
+    t1=i;
+    t2=i;
+    for(k=0;k<l1;k++){
+      cc[t2]=ch[t1];
+      t1+=ido;
+      t2+=t10;
+    }
+  }
+
+ L135:
+  t1=0;
+  t2=ido<<1;
+  t3=0;
+  t4=ipp2*t0;
+  for(j=1;j<ipph;j++){
+
+    t1+=t2;
+    t3+=t0;
+    t4-=t0;
+
+    t5=t1;
+    t6=t3;
+    t7=t4;
+
+    for(k=0;k<l1;k++){
+      cc[t5-1]=ch[t6];
+      cc[t5]=ch[t7];
+      t5+=t10;
+      t6+=ido;
+      t7+=ido;
+    }
+  }
+
+  if(ido==1)return;
+  if(nbd<l1)goto L141;
+
+  t1=-ido;
+  t3=0;
+  t4=0;
+  t5=ipp2*t0;
+  for(j=1;j<ipph;j++){
+    t1+=t2;
+    t3+=t2;
+    t4+=t0;
+    t5-=t0;
+    t6=t1;
+    t7=t3;
+    t8=t4;
+    t9=t5;
+    for(k=0;k<l1;k++){
+      for(i=2;i<ido;i+=2){
+        ic=idp2-i;
+        cc[i+t7-1]=ch[i+t8-1]+ch[i+t9-1];
+        cc[ic+t6-1]=ch[i+t8-1]-ch[i+t9-1];
+        cc[i+t7]=ch[i+t8]+ch[i+t9];
+        cc[ic+t6]=ch[i+t9]-ch[i+t8];
+      }
+      t6+=t10;
+      t7+=t10;
+      t8+=ido;
+      t9+=ido;
+    }
+  }
+  return;
+
+ L141:
+
+  t1=-ido;
+  t3=0;
+  t4=0;
+  t5=ipp2*t0;
+  for(j=1;j<ipph;j++){
+    t1+=t2;
+    t3+=t2;
+    t4+=t0;
+    t5-=t0;
+    for(i=2;i<ido;i+=2){
+      t6=idp2+t1-i;
+      t7=i+t3;
+      t8=i+t4;
+      t9=i+t5;
+      for(k=0;k<l1;k++){
+        cc[t7-1]=ch[t8-1]+ch[t9-1];
+        cc[t6-1]=ch[t8-1]-ch[t9-1];
+        cc[t7]=ch[t8]+ch[t9];
+        cc[t6]=ch[t9]-ch[t8];
+        t6+=t10;
+        t7+=t10;
+        t8+=ido;
+        t9+=ido;
+      }
+    }
+  }
+}
+
+static void drftf1(int n,float *c,float *ch,float *wa,int *ifac){
+  int i,k1,l1,l2;
+  int na,kh,nf;
+  int ip,iw,ido,idl1,ix2,ix3;
+
+  nf=ifac[1];
+  na=1;
+  l2=n;
+  iw=n;
+
+  for(k1=0;k1<nf;k1++){
+    kh=nf-k1;
+    ip=ifac[kh+1];
+    l1=l2/ip;
+    ido=n/l2;
+    idl1=ido*l1;
+    iw-=(ip-1)*ido;
+    na=1-na;
+
+    if(ip!=4)goto L102;
+
+    ix2=iw+ido;
+    ix3=ix2+ido;
+    if(na!=0)
+      dradf4(ido,l1,ch,c,wa+iw-1,wa+ix2-1,wa+ix3-1);
+    else
+      dradf4(ido,l1,c,ch,wa+iw-1,wa+ix2-1,wa+ix3-1);
+    goto L110;
+
+ L102:
+    if(ip!=2)goto L104;
+    if(na!=0)goto L103;
+
+    dradf2(ido,l1,c,ch,wa+iw-1);
+    goto L110;
+
+  L103:
+    dradf2(ido,l1,ch,c,wa+iw-1);
+    goto L110;
+
+  L104:
+    if(ido==1)na=1-na;
+    if(na!=0)goto L109;
+
+    dradfg(ido,ip,l1,idl1,c,c,c,ch,ch,wa+iw-1);
+    na=1;
+    goto L110;
+
+  L109:
+    dradfg(ido,ip,l1,idl1,ch,ch,ch,c,c,wa+iw-1);
+    na=0;
+
+  L110:
+    l2=l1;
+  }
+
+  if(na==1)return;
+
+  for(i=0;i<n;i++)c[i]=ch[i];
+}
+
+static void dradb2(int ido,int l1,float *cc,float *ch,float *wa1){
+  int i,k,t0,t1,t2,t3,t4,t5,t6;
+  float ti2,tr2;
+
+  t0=l1*ido;
+  
+  t1=0;
+  t2=0;
+  t3=(ido<<1)-1;
+  for(k=0;k<l1;k++){
+    ch[t1]=cc[t2]+cc[t3+t2];
+    ch[t1+t0]=cc[t2]-cc[t3+t2];
+    t2=(t1+=ido)<<1;
+  }
+
+  if(ido<2)return;
+  if(ido==2)goto L105;
+
+  t1=0;
+  t2=0;
+  for(k=0;k<l1;k++){
+    t3=t1;
+    t5=(t4=t2)+(ido<<1);
+    t6=t0+t1;
+    for(i=2;i<ido;i+=2){
+      t3+=2;
+      t4+=2;
+      t5-=2;
+      t6+=2;
+      ch[t3-1]=cc[t4-1]+cc[t5-1];
+      tr2=cc[t4-1]-cc[t5-1];
+      ch[t3]=cc[t4]-cc[t5];
+      ti2=cc[t4]+cc[t5];
+      ch[t6-1]=wa1[i-2]*tr2-wa1[i-1]*ti2;
+      ch[t6]=wa1[i-2]*ti2+wa1[i-1]*tr2;
+    }
+    t2=(t1+=ido)<<1;
+  }
+
+  if(ido%2==1)return;
+
+L105:
+  t1=ido-1;
+  t2=ido-1;
+  for(k=0;k<l1;k++){
+    ch[t1]=cc[t2]+cc[t2];
+    ch[t1+t0]=-(cc[t2+1]+cc[t2+1]);
+    t1+=ido;
+    t2+=ido<<1;
+  }
+}
+
+static void dradb3(int ido,int l1,float *cc,float *ch,float *wa1,
+                          float *wa2){
+  static float taur = -.5f;
+  static float taui = .8660254037844386f;
+  int i,k,t0,t1,t2,t3,t4,t5,t6,t7,t8,t9,t10;
+  float ci2,ci3,di2,di3,cr2,cr3,dr2,dr3,ti2,tr2;
+  t0=l1*ido;
+
+  t1=0;
+  t2=t0<<1;
+  t3=ido<<1;
+  t4=ido+(ido<<1);
+  t5=0;
+  for(k=0;k<l1;k++){
+    tr2=cc[t3-1]+cc[t3-1];
+    cr2=cc[t5]+(taur*tr2);
+    ch[t1]=cc[t5]+tr2;
+    ci3=taui*(cc[t3]+cc[t3]);
+    ch[t1+t0]=cr2-ci3;
+    ch[t1+t2]=cr2+ci3;
+    t1+=ido;
+    t3+=t4;
+    t5+=t4;
+  }
+
+  if(ido==1)return;
+
+  t1=0;
+  t3=ido<<1;
+  for(k=0;k<l1;k++){
+    t7=t1+(t1<<1);
+    t6=(t5=t7+t3);
+    t8=t1;
+    t10=(t9=t1+t0)+t0;
+
+    for(i=2;i<ido;i+=2){
+      t5+=2;
+      t6-=2;
+      t7+=2;
+      t8+=2;
+      t9+=2;
+      t10+=2;
+      tr2=cc[t5-1]+cc[t6-1];
+      cr2=cc[t7-1]+(taur*tr2);
+      ch[t8-1]=cc[t7-1]+tr2;
+      ti2=cc[t5]-cc[t6];
+      ci2=cc[t7]+(taur*ti2);
+      ch[t8]=cc[t7]+ti2;
+      cr3=taui*(cc[t5-1]-cc[t6-1]);
+      ci3=taui*(cc[t5]+cc[t6]);
+      dr2=cr2-ci3;
+      dr3=cr2+ci3;
+      di2=ci2+cr3;
+      di3=ci2-cr3;
+      ch[t9-1]=wa1[i-2]*dr2-wa1[i-1]*di2;
+      ch[t9]=wa1[i-2]*di2+wa1[i-1]*dr2;
+      ch[t10-1]=wa2[i-2]*dr3-wa2[i-1]*di3;
+      ch[t10]=wa2[i-2]*di3+wa2[i-1]*dr3;
+    }
+    t1+=ido;
+  }
+}
+
+static void dradb4(int ido,int l1,float *cc,float *ch,float *wa1,
+			  float *wa2,float *wa3){
+  static float sqrt2=1.414213562373095f;
+  int i,k,t0,t1,t2,t3,t4,t5,t6,t7,t8;
+  float ci2,ci3,ci4,cr2,cr3,cr4,ti1,ti2,ti3,ti4,tr1,tr2,tr3,tr4;
+  t0=l1*ido;
+  
+  t1=0;
+  t2=ido<<2;
+  t3=0;
+  t6=ido<<1;
+  for(k=0;k<l1;k++){
+    t4=t3+t6;
+    t5=t1;
+    tr3=cc[t4-1]+cc[t4-1];
+    tr4=cc[t4]+cc[t4]; 
+    tr1=cc[t3]-cc[(t4+=t6)-1];
+    tr2=cc[t3]+cc[t4-1];
+    ch[t5]=tr2+tr3;
+    ch[t5+=t0]=tr1-tr4;
+    ch[t5+=t0]=tr2-tr3;
+    ch[t5+=t0]=tr1+tr4;
+    t1+=ido;
+    t3+=t2;
+  }
+
+  if(ido<2)return;
+  if(ido==2)goto L105;
+
+  t1=0;
+  for(k=0;k<l1;k++){
+    t5=(t4=(t3=(t2=t1<<2)+t6))+t6;
+    t7=t1;
+    for(i=2;i<ido;i+=2){
+      t2+=2;
+      t3+=2;
+      t4-=2;
+      t5-=2;
+      t7+=2;
+      ti1=cc[t2]+cc[t5];
+      ti2=cc[t2]-cc[t5];
+      ti3=cc[t3]-cc[t4];
+      tr4=cc[t3]+cc[t4];
+      tr1=cc[t2-1]-cc[t5-1];
+      tr2=cc[t2-1]+cc[t5-1];
+      ti4=cc[t3-1]-cc[t4-1];
+      tr3=cc[t3-1]+cc[t4-1];
+      ch[t7-1]=tr2+tr3;
+      cr3=tr2-tr3;
+      ch[t7]=ti2+ti3;
+      ci3=ti2-ti3;
+      cr2=tr1-tr4;
+      cr4=tr1+tr4;
+      ci2=ti1+ti4;
+      ci4=ti1-ti4;
+
+      ch[(t8=t7+t0)-1]=wa1[i-2]*cr2-wa1[i-1]*ci2;
+      ch[t8]=wa1[i-2]*ci2+wa1[i-1]*cr2;
+      ch[(t8+=t0)-1]=wa2[i-2]*cr3-wa2[i-1]*ci3;
+      ch[t8]=wa2[i-2]*ci3+wa2[i-1]*cr3;
+      ch[(t8+=t0)-1]=wa3[i-2]*cr4-wa3[i-1]*ci4;
+      ch[t8]=wa3[i-2]*ci4+wa3[i-1]*cr4;
+    }
+    t1+=ido;
+  }
+
+  if(ido%2 == 1)return;
+
+ L105:
+
+  t1=ido;
+  t2=ido<<2;
+  t3=ido-1;
+  t4=ido+(ido<<1);
+  for(k=0;k<l1;k++){
+    t5=t3;
+    ti1=cc[t1]+cc[t4];
+    ti2=cc[t4]-cc[t1];
+    tr1=cc[t1-1]-cc[t4-1];
+    tr2=cc[t1-1]+cc[t4-1];
+    ch[t5]=tr2+tr2;
+    ch[t5+=t0]=sqrt2*(tr1-ti1);
+    ch[t5+=t0]=ti2+ti2;
+    ch[t5+=t0]=-sqrt2*(tr1+ti1);
+
+    t3+=ido;
+    t1+=t2;
+    t4+=t2;
+  }
+}
+
+static void dradbg(int ido,int ip,int l1,int idl1,float *cc,float *c1,
+            float *c2,float *ch,float *ch2,float *wa){
+  static float tpi=6.283185307179586f;
+  int idij,ipph,i,j,k,l,ik,is,t0,t1,t2,t3,t4,t5,t6,t7,t8,t9,t10,
+      t11,t12;
+  float dc2,ai1,ai2,ar1,ar2,ds2;
+  int nbd;
+  float dcp,arg,dsp,ar1h,ar2h;
+  int ipp2;
+
+  t10=ip*ido;
+  t0=l1*ido;
+  arg=tpi/(float)ip;
+  dcp=cos(arg);
+  dsp=sin(arg);
+  nbd=(ido-1)>>1;
+  ipp2=ip;
+  ipph=(ip+1)>>1;
+  if(ido<l1)goto L103;
+  
+  t1=0;
+  t2=0;
+  for(k=0;k<l1;k++){
+    t3=t1;
+    t4=t2;
+    for(i=0;i<ido;i++){
+      ch[t3]=cc[t4];
+      t3++;
+      t4++;
+    }
+    t1+=ido;
+    t2+=t10;
+  }
+  goto L106;
+
+ L103:
+  t1=0;
+  for(i=0;i<ido;i++){
+    t2=t1;
+    t3=t1;
+    for(k=0;k<l1;k++){
+      ch[t2]=cc[t3];
+      t2+=ido;
+      t3+=t10;
+    }
+    t1++;
+  }
+
+ L106:
+  t1=0;
+  t2=ipp2*t0;
+  t7=(t5=ido<<1);
+  for(j=1;j<ipph;j++){
+    t1+=t0;
+    t2-=t0;
+    t3=t1;
+    t4=t2;
+    t6=t5;
+    for(k=0;k<l1;k++){
+      ch[t3]=cc[t6-1]+cc[t6-1];
+      ch[t4]=cc[t6]+cc[t6];
+      t3+=ido;
+      t4+=ido;
+      t6+=t10;
+    }
+    t5+=t7;
+  }
+
+  if (ido == 1)goto L116;
+  if(nbd<l1)goto L112;
+
+  t1=0;
+  t2=ipp2*t0;
+  t7=0;
+  for(j=1;j<ipph;j++){
+    t1+=t0;
+    t2-=t0;
+    t3=t1;
+    t4=t2;
+
+    t7+=(ido<<1);
+    t8=t7;
+    for(k=0;k<l1;k++){
+      t5=t3;
+      t6=t4;
+      t9=t8;
+      t11=t8;
+      for(i=2;i<ido;i+=2){
+        t5+=2;
+        t6+=2;
+        t9+=2;
+        t11-=2;
+        ch[t5-1]=cc[t9-1]+cc[t11-1];
+        ch[t6-1]=cc[t9-1]-cc[t11-1];
+        ch[t5]=cc[t9]-cc[t11];
+        ch[t6]=cc[t9]+cc[t11];
+      }
+      t3+=ido;
+      t4+=ido;
+      t8+=t10;
+    }
+  }
+  goto L116;
+
+ L112:
+  t1=0;
+  t2=ipp2*t0;
+  t7=0;
+  for(j=1;j<ipph;j++){
+    t1+=t0;
+    t2-=t0;
+    t3=t1;
+    t4=t2;
+    t7+=(ido<<1);
+    t8=t7;
+    t9=t7;
+    for(i=2;i<ido;i+=2){
+      t3+=2;
+      t4+=2;
+      t8+=2;
+      t9-=2;
+      t5=t3;
+      t6=t4;
+      t11=t8;
+      t12=t9;
+      for(k=0;k<l1;k++){
+        ch[t5-1]=cc[t11-1]+cc[t12-1];
+        ch[t6-1]=cc[t11-1]-cc[t12-1];
+        ch[t5]=cc[t11]-cc[t12];
+        ch[t6]=cc[t11]+cc[t12];
+        t5+=ido;
+        t6+=ido;
+        t11+=t10;
+        t12+=t10;
+      }
+    }
+  }
+
+L116:
+  ar1=1.f;
+  ai1=0.f;
+  t1=0;
+  t9=(t2=ipp2*idl1);
+  t3=(ip-1)*idl1;
+  for(l=1;l<ipph;l++){
+    t1+=idl1;
+    t2-=idl1;
+
+    ar1h=dcp*ar1-dsp*ai1;
+    ai1=dcp*ai1+dsp*ar1;
+    ar1=ar1h;
+    t4=t1;
+    t5=t2;
+    t6=0;
+    t7=idl1;
+    t8=t3;
+    for(ik=0;ik<idl1;ik++){
+      c2[t4++]=ch2[t6++]+ar1*ch2[t7++];
+      c2[t5++]=ai1*ch2[t8++];
+    }
+    dc2=ar1;
+    ds2=ai1;
+    ar2=ar1;
+    ai2=ai1;
+
+    t6=idl1;
+    t7=t9-idl1;
+    for(j=2;j<ipph;j++){
+      t6+=idl1;
+      t7-=idl1;
+      ar2h=dc2*ar2-ds2*ai2;
+      ai2=dc2*ai2+ds2*ar2;
+      ar2=ar2h;
+      t4=t1;
+      t5=t2;
+      t11=t6;
+      t12=t7;
+      for(ik=0;ik<idl1;ik++){
+        c2[t4++]+=ar2*ch2[t11++];
+        c2[t5++]+=ai2*ch2[t12++];
+      }
+    }
+  }
+
+  t1=0;
+  for(j=1;j<ipph;j++){
+    t1+=idl1;
+    t2=t1;
+    for(ik=0;ik<idl1;ik++)ch2[ik]+=ch2[t2++];
+  }
+
+  t1=0;
+  t2=ipp2*t0;
+  for(j=1;j<ipph;j++){
+    t1+=t0;
+    t2-=t0;
+    t3=t1;
+    t4=t2;
+    for(k=0;k<l1;k++){
+      ch[t3]=c1[t3]-c1[t4];
+      ch[t4]=c1[t3]+c1[t4];
+      t3+=ido;
+      t4+=ido;
+    }
+  }
+
+  if(ido==1)goto L132;
+  if(nbd<l1)goto L128;
+
+  t1=0;
+  t2=ipp2*t0;
+  for(j=1;j<ipph;j++){
+    t1+=t0;
+    t2-=t0;
+    t3=t1;
+    t4=t2;
+    for(k=0;k<l1;k++){
+      t5=t3;
+      t6=t4;
+      for(i=2;i<ido;i+=2){
+        t5+=2;
+        t6+=2;
+        ch[t5-1]=c1[t5-1]-c1[t6];
+        ch[t6-1]=c1[t5-1]+c1[t6];
+        ch[t5]=c1[t5]+c1[t6-1];
+        ch[t6]=c1[t5]-c1[t6-1];
+      }
+      t3+=ido;
+      t4+=ido;
+    }
+  }
+  goto L132;
+
+ L128:
+  t1=0;
+  t2=ipp2*t0;
+  for(j=1;j<ipph;j++){
+    t1+=t0;
+    t2-=t0;
+    t3=t1;
+    t4=t2;
+    for(i=2;i<ido;i+=2){
+      t3+=2;
+      t4+=2;
+      t5=t3;
+      t6=t4;
+      for(k=0;k<l1;k++){
+        ch[t5-1]=c1[t5-1]-c1[t6];
+        ch[t6-1]=c1[t5-1]+c1[t6];
+        ch[t5]=c1[t5]+c1[t6-1];
+        ch[t6]=c1[t5]-c1[t6-1];
+        t5+=ido;
+        t6+=ido;
+      }
+    }
+  }
+
+L132:
+  if(ido==1)return;
+
+  for(ik=0;ik<idl1;ik++)c2[ik]=ch2[ik];
+
+  t1=0;
+  for(j=1;j<ip;j++){
+    t2=(t1+=t0);
+    for(k=0;k<l1;k++){
+      c1[t2]=ch[t2];
+      t2+=ido;
+    }
+  }
+
+  if(nbd>l1)goto L139;
+
+  is= -ido-1;
+  t1=0;
+  for(j=1;j<ip;j++){
+    is+=ido;
+    t1+=t0;
+    idij=is;
+    t2=t1;
+    for(i=2;i<ido;i+=2){
+      t2+=2;
+      idij+=2;
+      t3=t2;
+      for(k=0;k<l1;k++){
+        c1[t3-1]=wa[idij-1]*ch[t3-1]-wa[idij]*ch[t3];
+        c1[t3]=wa[idij-1]*ch[t3]+wa[idij]*ch[t3-1];
+        t3+=ido;
+      }
+    }
+  }
+  return;
+
+ L139:
+  is= -ido-1;
+  t1=0;
+  for(j=1;j<ip;j++){
+    is+=ido;
+    t1+=t0;
+    t2=t1;
+    for(k=0;k<l1;k++){
+      idij=is;
+      t3=t2;
+      for(i=2;i<ido;i+=2){
+        idij+=2;
+        t3+=2;
+        c1[t3-1]=wa[idij-1]*ch[t3-1]-wa[idij]*ch[t3];
+        c1[t3]=wa[idij-1]*ch[t3]+wa[idij]*ch[t3-1];
+      }
+      t2+=ido;
+    }
+  }
+}
+
+static void drftb1(int n, float *c, float *ch, float *wa, int *ifac){
+  int i,k1,l1,l2;
+  int na;
+  int nf,ip,iw,ix2,ix3,ido,idl1;
+
+  nf=ifac[1];
+  na=0;
+  l1=1;
+  iw=1;
+
+  for(k1=0;k1<nf;k1++){
+    ip=ifac[k1 + 2];
+    l2=ip*l1;
+    ido=n/l2;
+    idl1=ido*l1;
+    if(ip!=4)goto L103;
+    ix2=iw+ido;
+    ix3=ix2+ido;
+
+    if(na!=0)
+      dradb4(ido,l1,ch,c,wa+iw-1,wa+ix2-1,wa+ix3-1);
+    else
+      dradb4(ido,l1,c,ch,wa+iw-1,wa+ix2-1,wa+ix3-1);
+    na=1-na;
+    goto L115;
+
+  L103:
+    if(ip!=2)goto L106;
+
+    if(na!=0)
+      dradb2(ido,l1,ch,c,wa+iw-1);
+    else
+      dradb2(ido,l1,c,ch,wa+iw-1);
+    na=1-na;
+    goto L115;
+
+  L106:
+    if(ip!=3)goto L109;
+
+    ix2=iw+ido;
+    if(na!=0)
+      dradb3(ido,l1,ch,c,wa+iw-1,wa+ix2-1);
+    else
+      dradb3(ido,l1,c,ch,wa+iw-1,wa+ix2-1);
+    na=1-na;
+    goto L115;
+
+  L109:
+/*    The radix five case can be translated later..... */
+/*    if(ip!=5)goto L112;
+
+    ix2=iw+ido;
+    ix3=ix2+ido;
+    ix4=ix3+ido;
+    if(na!=0)
+      dradb5(ido,l1,ch,c,wa+iw-1,wa+ix2-1,wa+ix3-1,wa+ix4-1);
+    else
+      dradb5(ido,l1,c,ch,wa+iw-1,wa+ix2-1,wa+ix3-1,wa+ix4-1);
+    na=1-na;
+    goto L115;
+
+  L112:*/
+    if(na!=0)
+      dradbg(ido,ip,l1,idl1,ch,ch,ch,c,c,wa+iw-1);
+    else
+      dradbg(ido,ip,l1,idl1,c,c,c,ch,ch,wa+iw-1);
+    if(ido==1)na=1-na;
+
+  L115:
+    l1=l2;
+    iw+=(ip-1)*ido;
+  }
+
+  if(na==0)return;
+
+  for(i=0;i<n;i++)c[i]=ch[i];
+}
+
+void spx_drft_forward(struct drft_lookup *l,float *data){
+  if(l->n==1)return;
+  drftf1(l->n,data,l->trigcache,l->trigcache+l->n,l->splitcache);
+}
+
+void spx_drft_backward(struct drft_lookup *l,float *data){
+  if (l->n==1)return;
+  drftb1(l->n,data,l->trigcache,l->trigcache+l->n,l->splitcache);
+}
+
+void spx_drft_init(struct drft_lookup *l,int n)
+{
+  l->n=n;
+  l->trigcache=(float*)speex_alloc(3*n*sizeof(*l->trigcache));
+  l->splitcache=(int*)speex_alloc(32*sizeof(*l->splitcache));
+  fdrffti(n, l->trigcache, l->splitcache);
+}
+
+void spx_drft_clear(struct drft_lookup *l)
+{
+  if(l)
+  {
+    if(l->trigcache)
+      speex_free(l->trigcache);
+    if(l->splitcache)
+      speex_free(l->splitcache);
+  }
+}

Added: freeswitch/trunk/libs/speex/libspeex/smallft.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/smallft.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,46 @@
+/********************************************************************
+ *                                                                  *
+ * THIS FILE IS PART OF THE OggVorbis SOFTWARE CODEC SOURCE CODE.   *
+ * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS     *
+ * GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE *
+ * IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING.       *
+ *                                                                  *
+ * THE OggVorbis SOURCE CODE IS (C) COPYRIGHT 1994-2001             *
+ * by the XIPHOPHORUS Company http://www.xiph.org/                  *
+ *                                                                  *
+ ********************************************************************
+
+ function: fft transform
+ last mod: $Id: smallft.h,v 1.3 2003/09/16 18:35:45 jm Exp $
+
+ ********************************************************************/
+/**
+   @file smallft.h
+   @brief Discrete Rotational Fourier Transform (DRFT)
+*/
+
+#ifndef _V_SMFT_H_
+#define _V_SMFT_H_
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Discrete Rotational Fourier Transform lookup */
+struct drft_lookup{
+  int n;
+  float *trigcache;
+  int *splitcache;
+};
+
+extern void spx_drft_forward(struct drft_lookup *l,float *data);
+extern void spx_drft_backward(struct drft_lookup *l,float *data);
+extern void spx_drft_init(struct drft_lookup *l,int n);
+extern void spx_drft_clear(struct drft_lookup *l);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/speex.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/speex.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,268 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: speex.c
+
+   Basic Speex functions
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "modes.h"
+#include <math.h>
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+#define MAX_IN_SAMPLES 640
+
+
+
+void *speex_encoder_init(const SpeexMode *mode)
+{
+   return mode->enc_init(mode);
+}
+
+void *speex_decoder_init(const SpeexMode *mode)
+{
+   return mode->dec_init(mode);
+}
+
+void speex_encoder_destroy(void *state)
+{
+   (*((SpeexMode**)state))->enc_destroy(state);
+}
+
+void speex_decoder_destroy(void *state)
+{
+   (*((SpeexMode**)state))->dec_destroy(state);
+}
+
+
+
+int speex_encode_native(void *state, spx_word16_t *in, SpeexBits *bits)
+{
+   return (*((SpeexMode**)state))->enc(state, in, bits);
+}
+
+int speex_decode_native(void *state, SpeexBits *bits, spx_word16_t *out)
+{
+   return (*((SpeexMode**)state))->dec(state, bits, out);
+}
+
+
+
+#ifdef FIXED_POINT
+
+int speex_encode(void *state, float *in, SpeexBits *bits)
+{
+   int i;
+   spx_int32_t N;
+   spx_int16_t short_in[MAX_IN_SAMPLES];
+   speex_encoder_ctl(state, SPEEX_GET_FRAME_SIZE, &N);
+   for (i=0;i<N;i++)
+   {
+      if (in[i]>32767.f)
+         short_in[i] = 32767;
+      else if (in[i]<-32768.f)
+         short_in[i] = -32768;
+      else
+         short_in[i] = (spx_int16_t)floor(.5+in[i]);
+   }
+   return (*((SpeexMode**)state))->enc(state, short_in, bits);
+}
+
+int speex_encode_int(void *state, spx_int16_t *in, SpeexBits *bits)
+{
+   SpeexMode *mode;
+   mode = *(SpeexMode**)state;
+   return (mode)->enc(state, in, bits);
+}
+
+int speex_decode(void *state, SpeexBits *bits, float *out)
+{
+   int i, ret;
+   spx_int32_t N;
+   spx_int16_t short_out[MAX_IN_SAMPLES];
+   speex_decoder_ctl(state, SPEEX_GET_FRAME_SIZE, &N);
+   ret = (*((SpeexMode**)state))->dec(state, bits, short_out);
+   for (i=0;i<N;i++)
+      out[i] = short_out[i];
+   return ret;
+}
+
+int speex_decode_int(void *state, SpeexBits *bits, spx_int16_t *out)
+{
+   SpeexMode *mode = *(SpeexMode**)state;
+   return (mode)->dec(state, bits, out);
+}
+
+#else
+
+int speex_encode(void *state, float *in, SpeexBits *bits)
+{
+   return (*((SpeexMode**)state))->enc(state, in, bits);
+}
+
+int speex_encode_int(void *state, spx_int16_t *in, SpeexBits *bits)
+{
+   int i;
+   spx_int32_t N;
+   float float_in[MAX_IN_SAMPLES];
+   speex_encoder_ctl(state, SPEEX_GET_FRAME_SIZE, &N);
+   for (i=0;i<N;i++)
+      float_in[i] = in[i];
+   return (*((SpeexMode**)state))->enc(state, float_in, bits);
+}
+
+int speex_decode(void *state, SpeexBits *bits, float *out)
+{
+   return (*((SpeexMode**)state))->dec(state, bits, out);
+}
+
+int speex_decode_int(void *state, SpeexBits *bits, spx_int16_t *out)
+{
+   int i;
+   spx_int32_t N;
+   float float_out[MAX_IN_SAMPLES];
+   int ret;
+   speex_decoder_ctl(state, SPEEX_GET_FRAME_SIZE, &N);
+   ret = (*((SpeexMode**)state))->dec(state, bits, float_out);
+   for (i=0;i<N;i++)
+   {
+      if (float_out[i]>32767.f)
+         out[i] = 32767;
+      else if (float_out[i]<-32768.f)
+         out[i] = -32768;
+      else
+         out[i] = (spx_int16_t)floor(.5+float_out[i]);
+   }
+   return ret;
+}
+#endif
+
+
+
+int speex_encoder_ctl(void *state, int request, void *ptr)
+{
+   return (*((SpeexMode**)state))->enc_ctl(state, request, ptr);
+}
+
+int speex_decoder_ctl(void *state, int request, void *ptr)
+{
+   return (*((SpeexMode**)state))->dec_ctl(state, request, ptr);
+}
+
+
+
+int nb_mode_query(const void *mode, int request, void *ptr)
+{
+   const SpeexNBMode *m = (const SpeexNBMode*)mode;
+   
+   switch (request)
+   {
+   case SPEEX_MODE_FRAME_SIZE:
+      *((int*)ptr)=m->frameSize;
+      break;
+   case SPEEX_SUBMODE_BITS_PER_FRAME:
+      if (*((int*)ptr)==0)
+         *((int*)ptr) = NB_SUBMODE_BITS+1;
+      else if (m->submodes[*((int*)ptr)]==NULL)
+         *((int*)ptr) = -1;
+      else
+         *((int*)ptr) = m->submodes[*((int*)ptr)]->bits_per_frame;
+      break;
+   default:
+      speex_warning_int("Unknown nb_mode_query request: ", request);
+      return -1;
+   }
+   return 0;
+}
+
+int wb_mode_query(const void *mode, int request, void *ptr)
+{
+   const SpeexSBMode *m = (const SpeexSBMode*)mode;
+
+   switch (request)
+   {
+   case SPEEX_MODE_FRAME_SIZE:
+      *((int*)ptr)=2*m->frameSize;
+      break;
+   case SPEEX_SUBMODE_BITS_PER_FRAME:
+      if (*((int*)ptr)==0)
+         *((int*)ptr) = SB_SUBMODE_BITS+1;
+      else if (m->submodes[*((int*)ptr)]==NULL)
+         *((int*)ptr) = -1;
+      else
+         *((int*)ptr) = m->submodes[*((int*)ptr)]->bits_per_frame;
+      break;
+   default:
+      speex_warning_int("Unknown wb_mode_query request: ", request);
+      return -1;
+   }
+   return 0;
+}
+
+
+int speex_lib_ctl(int request, void *ptr)
+{
+   switch (request)
+   {
+      case SPEEX_LIB_GET_MAJOR_VERSION:
+         *((int*)ptr) = SPEEX_MAJOR_VERSION;
+         break;
+      case SPEEX_LIB_GET_MINOR_VERSION:
+         *((int*)ptr) = SPEEX_MINOR_VERSION;
+         break;
+      case SPEEX_LIB_GET_MICRO_VERSION:
+         *((int*)ptr) = SPEEX_MICRO_VERSION;
+         break;
+      case SPEEX_LIB_GET_EXTRA_VERSION:
+         *((const char**)ptr) = SPEEX_EXTRA_VERSION;
+         break;
+      case SPEEX_LIB_GET_VERSION_STRING:
+         *((const char**)ptr) = SPEEX_VERSION;
+         break;
+      /*case SPEEX_LIB_SET_ALLOC_FUNC:
+         break;
+      case SPEEX_LIB_GET_ALLOC_FUNC:
+         break;
+      case SPEEX_LIB_SET_FREE_FUNC:
+         break;
+      case SPEEX_LIB_GET_FREE_FUNC:
+         break;*/
+      default:
+         speex_warning_int("Unknown wb_mode_query request: ", request);
+         return -1;
+   }
+   return 0;
+}

Added: freeswitch/trunk/libs/speex/libspeex/speex_callbacks.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/speex_callbacks.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,140 @@
+/* Copyright (C) 2002 Jean-Marc Valin
+   File speex_callbacks.c
+   Callback handling and in-band signalling
+
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <speex/speex_callbacks.h>
+#include "misc.h"
+
+int speex_inband_handler(SpeexBits *bits, SpeexCallback *callback_list, void *state)
+{
+   int id;
+   SpeexCallback *callback;
+   /*speex_bits_advance(bits, 5);*/
+   id=speex_bits_unpack_unsigned(bits, 4);
+   callback = callback_list+id;
+
+   if (callback->func)
+   {
+      return callback->func(bits, state, callback->data);
+   } else
+      /*If callback is not registered, skip the right number of bits*/
+   {
+      int adv;
+      if (id<2)
+         adv = 1;
+      else if (id<8)
+         adv = 4;
+      else if (id<10)
+         adv = 8;
+      else if (id<12)
+         adv = 16;
+      else if (id<14)
+         adv = 32;
+      else 
+         adv = 64;
+      speex_bits_advance(bits, adv);
+   }
+   return 0;
+}
+
+int speex_std_mode_request_handler(SpeexBits *bits, void *state, void *data)
+{
+   spx_int32_t m;
+   m = speex_bits_unpack_unsigned(bits, 4);
+   speex_encoder_ctl(data, SPEEX_SET_MODE, &m);
+   return 0;
+}
+
+int speex_std_low_mode_request_handler(SpeexBits *bits, void *state, void *data)
+{
+   spx_int32_t m;
+   m = speex_bits_unpack_unsigned(bits, 4);
+   speex_encoder_ctl(data, SPEEX_SET_LOW_MODE, &m);
+   return 0;
+}
+
+int speex_std_high_mode_request_handler(SpeexBits *bits, void *state, void *data)
+{
+   spx_int32_t m;
+   m = speex_bits_unpack_unsigned(bits, 4);
+   speex_encoder_ctl(data, SPEEX_SET_HIGH_MODE, &m);
+   return 0;
+}
+
+int speex_std_vbr_request_handler(SpeexBits *bits, void *state, void *data)
+{
+   spx_int32_t vbr;
+   vbr = speex_bits_unpack_unsigned(bits, 1);
+   speex_encoder_ctl(data, SPEEX_SET_VBR, &vbr);
+   return 0;
+}
+
+int speex_std_enh_request_handler(SpeexBits *bits, void *state, void *data)
+{
+   spx_int32_t enh;
+   enh = speex_bits_unpack_unsigned(bits, 1);
+   speex_decoder_ctl(data, SPEEX_SET_ENH, &enh);
+   return 0;
+}
+
+int speex_std_vbr_quality_request_handler(SpeexBits *bits, void *state, void *data)
+{
+   float qual;
+   qual = speex_bits_unpack_unsigned(bits, 4);
+   speex_encoder_ctl(data, SPEEX_SET_VBR_QUALITY, &qual);
+   return 0;
+}
+
+
+int speex_std_char_handler(SpeexBits *bits, void *state, void *data)
+{
+   unsigned char ch;
+   ch = speex_bits_unpack_unsigned(bits, 8);
+   _speex_putc(ch, data);
+   /*printf("speex_std_char_handler ch=%x\n", ch);*/
+   return 0;
+}
+
+
+
+/* Default handler for user callbacks: skip it */
+int speex_default_user_handler(SpeexBits *bits, void *state, void *data)
+{
+   int req_size = speex_bits_unpack_unsigned(bits, 4);
+   speex_bits_advance(bits, 5+8*req_size);
+   return 0;
+}

Added: freeswitch/trunk/libs/speex/libspeex/speex_header.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/speex_header.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,166 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: speex_header.c
+   Describes the Speex header
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "misc.h"
+#include <speex/speex_header.h>
+#include <speex/speex.h>
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+#define ENDIAN_SWITCH(x) {x=le_int(x);}
+
+
+/*
+typedef struct SpeexHeader {
+   char speex_string[8];
+   char speex_version[SPEEX_HEADER_VERSION_LENGTH];
+   int speex_version_id;
+   int header_size;
+   int rate;
+   int mode;
+   int mode_bitstream_version;
+   int nb_channels;
+   int bitrate;
+   int frame_size;
+   int vbr;
+   int frames_per_packet;
+   int extra_headers;
+   int reserved1;
+   int reserved2;
+} SpeexHeader;
+*/
+
+void speex_init_header(SpeexHeader *header, int rate, int nb_channels, const SpeexMode *m)
+{
+   int i;
+   const char *h="Speex   ";
+   /*
+   strncpy(header->speex_string, "Speex   ", 8);
+   strncpy(header->speex_version, SPEEX_VERSION, SPEEX_HEADER_VERSION_LENGTH-1);
+   header->speex_version[SPEEX_HEADER_VERSION_LENGTH-1]=0;
+   */
+   for (i=0;i<8;i++)
+      header->speex_string[i]=h[i];
+   for (i=0;i<SPEEX_HEADER_VERSION_LENGTH-1 && SPEEX_VERSION[i];i++)
+      header->speex_version[i]=SPEEX_VERSION[i];
+   for (;i<SPEEX_HEADER_VERSION_LENGTH;i++)
+      header->speex_version[i]=0;
+   
+   header->speex_version_id = 1;
+   header->header_size = sizeof(SpeexHeader);
+   
+   header->rate = rate;
+   header->mode = m->modeID;
+   header->mode_bitstream_version = m->bitstream_version;
+   if (m->modeID<0)
+      speex_warning("This mode is meant to be used alone");
+   header->nb_channels = nb_channels;
+   header->bitrate = -1;
+   speex_mode_query(m, SPEEX_MODE_FRAME_SIZE, &header->frame_size);
+   header->vbr = 0;
+   
+   header->frames_per_packet = 0;
+   header->extra_headers = 0;
+   header->reserved1 = 0;
+   header->reserved2 = 0;
+}
+
+char *speex_header_to_packet(SpeexHeader *header, int *size)
+{
+   SpeexHeader *le_header;
+   le_header = (SpeexHeader*)speex_alloc(sizeof(SpeexHeader));
+   
+   speex_move(le_header, header, sizeof(SpeexHeader));
+   
+   /*Make sure everything is now little-endian*/
+   ENDIAN_SWITCH(le_header->speex_version_id);
+   ENDIAN_SWITCH(le_header->header_size);
+   ENDIAN_SWITCH(le_header->rate);
+   ENDIAN_SWITCH(le_header->mode);
+   ENDIAN_SWITCH(le_header->mode_bitstream_version);
+   ENDIAN_SWITCH(le_header->nb_channels);
+   ENDIAN_SWITCH(le_header->bitrate);
+   ENDIAN_SWITCH(le_header->frame_size);
+   ENDIAN_SWITCH(le_header->vbr);
+   ENDIAN_SWITCH(le_header->frames_per_packet);
+   ENDIAN_SWITCH(le_header->extra_headers);
+
+   *size = sizeof(SpeexHeader);
+   return (char *)le_header;
+}
+
+SpeexHeader *speex_packet_to_header(char *packet, int size)
+{
+   int i;
+   SpeexHeader *le_header;
+   const char *h = "Speex   ";
+   for (i=0;i<8;i++)
+      if (packet[i]!=h[i])
+      {
+         speex_warning ("This doesn't look like a Speex file");
+         return NULL;
+      }
+   
+   /*FIXME: Do we allow larger headers?*/
+   if (size < (int)sizeof(SpeexHeader))
+   {
+      speex_warning("Speex header too small");
+      return NULL;
+   }
+   
+   le_header = (SpeexHeader*)speex_alloc(sizeof(SpeexHeader));
+   
+   speex_move(le_header, packet, sizeof(SpeexHeader));
+   
+   /*Make sure everything is converted correctly from little-endian*/
+   ENDIAN_SWITCH(le_header->speex_version_id);
+   ENDIAN_SWITCH(le_header->header_size);
+   ENDIAN_SWITCH(le_header->rate);
+   ENDIAN_SWITCH(le_header->mode);
+   ENDIAN_SWITCH(le_header->mode_bitstream_version);
+   ENDIAN_SWITCH(le_header->nb_channels);
+   ENDIAN_SWITCH(le_header->bitrate);
+   ENDIAN_SWITCH(le_header->frame_size);
+   ENDIAN_SWITCH(le_header->vbr);
+   ENDIAN_SWITCH(le_header->frames_per_packet);
+   ENDIAN_SWITCH(le_header->extra_headers);
+
+   return le_header;
+
+}

Added: freeswitch/trunk/libs/speex/libspeex/stack_alloc.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/stack_alloc.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,124 @@
+/* Copyright (C) 2002 Jean-Marc Valin */
+/**
+   @file stack_alloc.h
+   @brief Temporary memory allocation on stack
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef STACK_ALLOC_H
+#define STACK_ALLOC_H
+
+#ifdef USE_ALLOCA
+#ifdef WIN32
+#include <malloc.h>
+#else
+#include <alloca.h>
+#endif
+#endif
+
+/**
+ * @def ALIGN(stack, size)
+ *
+ * Aligns the stack to a 'size' boundary
+ *
+ * @param stack Stack
+ * @param size  New size boundary
+ */
+
+/**
+ * @def PUSH(stack, size, type)
+ *
+ * Allocates 'size' elements of type 'type' on the stack
+ *
+ * @param stack Stack
+ * @param size  Number of elements
+ * @param type  Type of element
+ */
+
+/**
+ * @def PUSHS(stack, type)
+ *
+ * Allocates a struct stack 
+ *
+ * @param stack Stack
+ * @param type  Struct type
+ */
+
+/**
+ * @def VARDECL(var)
+ *
+ * Declare variable on stack
+ *
+ * @param var Variable to declare
+ */
+
+/**
+ * @def ALLOC(var, size, type)
+ *
+ * Allocate 'size' elements of 'type' on stack
+ *
+ * @param var  Name of variable to allocate
+ * @param size Number of elements
+ * @param type Type of element
+ */
+
+#ifdef ENABLE_VALGRIND
+
+#include <valgrind/memcheck.h>
+
+#define ALIGN(stack, size) ((stack) += ((size) - (long)(stack)) & ((size) - 1))
+
+#define PUSH(stack, size, type) (VALGRIND_MAKE_NOACCESS(stack, 1000),ALIGN((stack),sizeof(type)),VALGRIND_MAKE_WRITABLE(stack, ((size)*sizeof(type))),(stack)+=((size)*sizeof(type)),(type*)((stack)-((size)*sizeof(type))))
+
+#define PUSHS(stack, type) (VALGRIND_MAKE_NOACCESS(stack, 1000),ALIGN((stack),sizeof(long)),VALGRIND_MAKE_WRITABLE(stack, (sizeof(type))),(stack)+=(sizeof(type)),(type*)((stack)-(sizeof(type))))
+
+#else
+
+#define ALIGN(stack, size) ((stack) += ((size) - (long)(stack)) & ((size) - 1))
+
+#define PUSH(stack, size, type) (ALIGN((stack),sizeof(type)),(stack)+=((size)*sizeof(type)),(type*)((stack)-((size)*sizeof(type))))
+
+#define PUSHS(stack, type) (ALIGN((stack),sizeof(long)),(stack)+=(sizeof(type)),(type*)((stack)-(sizeof(type))))
+
+#endif
+
+#if defined(VAR_ARRAYS)
+#define VARDECL(var) 
+#define ALLOC(var, size, type) type var[size]
+#elif defined(USE_ALLOCA)
+#define VARDECL(var) var
+#define ALLOC(var, size, type) var = alloca(sizeof(type)*(size))
+#else
+#define VARDECL(var) var
+#define ALLOC(var, size, type) var = PUSH(stack, size, type)
+#endif
+
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/stereo.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/stereo.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,192 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: stereo.c
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <speex/speex_stereo.h>
+#include <speex/speex_callbacks.h>
+#include "vq.h"
+#include <math.h>
+
+/*float e_ratio_quant[4] = {1, 1.26, 1.587, 2};*/
+static const float e_ratio_quant[4] = {.25f, .315f, .397f, .5f};
+
+void speex_encode_stereo(float *data, int frame_size, SpeexBits *bits)
+{
+   int i, tmp;
+   float e_left=0, e_right=0, e_tot=0;
+   float balance, e_ratio;
+   for (i=0;i<frame_size;i++)
+   {
+      e_left  += ((float)data[2*i])*data[2*i];
+      e_right += ((float)data[2*i+1])*data[2*i+1];
+      data[i] =  .5*(((float)data[2*i])+data[2*i+1]);
+      e_tot   += ((float)data[i])*data[i];
+   }
+   balance=(e_left+1)/(e_right+1);
+   e_ratio = e_tot/(1+e_left+e_right);
+
+   /*Quantization*/
+   speex_bits_pack(bits, 14, 5);
+   speex_bits_pack(bits, SPEEX_INBAND_STEREO, 4);
+   
+   balance=4*log(balance);
+
+   /*Pack sign*/
+   if (balance>0)
+      speex_bits_pack(bits, 0, 1);
+   else
+      speex_bits_pack(bits, 1, 1);
+   balance=floor(.5+fabs(balance));
+   if (balance>30)
+      balance=31;
+   
+   speex_bits_pack(bits, (int)balance, 5);
+   
+   /*Quantize energy ratio*/
+   tmp=vq_index(&e_ratio, e_ratio_quant, 1, 4);
+   speex_bits_pack(bits, tmp, 2);
+}
+
+void speex_encode_stereo_int(spx_int16_t *data, int frame_size, SpeexBits *bits)
+{
+   int i, tmp;
+   float e_left=0, e_right=0, e_tot=0;
+   float balance, e_ratio;
+   for (i=0;i<frame_size;i++)
+   {
+      e_left  += ((float)data[2*i])*data[2*i];
+      e_right += ((float)data[2*i+1])*data[2*i+1];
+      data[i] =  .5*(((float)data[2*i])+data[2*i+1]);
+      e_tot   += ((float)data[i])*data[i];
+   }
+   balance=(e_left+1)/(e_right+1);
+   e_ratio = e_tot/(1+e_left+e_right);
+
+   /*Quantization*/
+   speex_bits_pack(bits, 14, 5);
+   speex_bits_pack(bits, SPEEX_INBAND_STEREO, 4);
+   
+   balance=4*log(balance);
+
+   /*Pack sign*/
+   if (balance>0)
+      speex_bits_pack(bits, 0, 1);
+   else
+      speex_bits_pack(bits, 1, 1);
+   balance=floor(.5+fabs(balance));
+   if (balance>30)
+      balance=31;
+   
+   speex_bits_pack(bits, (int)balance, 5);
+   
+   /*Quantize energy ratio*/
+   tmp=vq_index(&e_ratio, e_ratio_quant, 1, 4);
+   speex_bits_pack(bits, tmp, 2);
+}
+
+void speex_decode_stereo(float *data, int frame_size, SpeexStereoState *stereo)
+{
+   float balance, e_ratio;
+   int i;
+   float e_tot=0, e_left, e_right, e_sum;
+
+   balance=stereo->balance;
+   e_ratio=stereo->e_ratio;
+   for (i=frame_size-1;i>=0;i--)
+   {
+      e_tot += ((float)data[i])*data[i];
+   }
+   e_sum=e_tot/e_ratio;
+   e_left  = e_sum*balance / (1+balance);
+   e_right = e_sum-e_left;
+
+   e_left  = sqrt(e_left/(e_tot+.01));
+   e_right = sqrt(e_right/(e_tot+.01));
+
+   for (i=frame_size-1;i>=0;i--)
+   {
+      float ftmp=data[i];
+      stereo->smooth_left  = .98*stereo->smooth_left  + .02*e_left;
+      stereo->smooth_right = .98*stereo->smooth_right + .02*e_right;
+      data[2*i] = stereo->smooth_left*ftmp;
+      data[2*i+1] = stereo->smooth_right*ftmp;
+   }
+}
+
+void speex_decode_stereo_int(spx_int16_t *data, int frame_size, SpeexStereoState *stereo)
+{
+   float balance, e_ratio;
+   int i;
+   float e_tot=0, e_left, e_right, e_sum;
+
+   balance=stereo->balance;
+   e_ratio=stereo->e_ratio;
+   for (i=frame_size-1;i>=0;i--)
+   {
+      e_tot += ((float)data[i])*data[i];
+   }
+   e_sum=e_tot/e_ratio;
+   e_left  = e_sum*balance / (1+balance);
+   e_right = e_sum-e_left;
+
+   e_left  = sqrt(e_left/(e_tot+.01));
+   e_right = sqrt(e_right/(e_tot+.01));
+
+   for (i=frame_size-1;i>=0;i--)
+   {
+      float ftmp=data[i];
+      stereo->smooth_left  = .98*stereo->smooth_left  + .02*e_left;
+      stereo->smooth_right = .98*stereo->smooth_right + .02*e_right;
+      data[2*i] = stereo->smooth_left*ftmp;
+      data[2*i+1] = stereo->smooth_right*ftmp;
+   }
+}
+
+int speex_std_stereo_request_handler(SpeexBits *bits, void *state, void *data)
+{
+   SpeexStereoState *stereo;
+   float sign=1;
+   int tmp;
+
+   stereo = (SpeexStereoState*)data;
+   if (speex_bits_unpack_unsigned(bits, 1))
+      sign=-1;
+   tmp = speex_bits_unpack_unsigned(bits, 5);
+   stereo->balance = exp(sign*.25*tmp);
+
+   tmp = speex_bits_unpack_unsigned(bits, 2);
+   stereo->e_ratio = e_ratio_quant[tmp];
+
+   return 0;
+}

Added: freeswitch/trunk/libs/speex/libspeex/testdenoise.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/testdenoise.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,44 @@
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <speex/speex_preprocess.h>
+#include <stdio.h>
+
+#define NN 160
+
+int main()
+{
+   short in[NN];
+   int i;
+   SpeexPreprocessState *st;
+   int count=0;
+   float f;
+
+   st = speex_preprocess_state_init(NN, 8000);
+   i=1;
+   speex_preprocess_ctl(st, SPEEX_PREPROCESS_SET_DENOISE, &i);
+   i=0;
+   speex_preprocess_ctl(st, SPEEX_PREPROCESS_SET_AGC, &i);
+   f=8000;
+   speex_preprocess_ctl(st, SPEEX_PREPROCESS_SET_AGC_LEVEL, &f);
+   i=0;
+   speex_preprocess_ctl(st, SPEEX_PREPROCESS_SET_DEREVERB, &i);
+   f=.4;
+   speex_preprocess_ctl(st, SPEEX_PREPROCESS_SET_DEREVERB_DECAY, &f);
+   f=.3;
+   speex_preprocess_ctl(st, SPEEX_PREPROCESS_SET_DEREVERB_LEVEL, &f);
+   while (1)
+   {
+      int vad;
+      fread(in, sizeof(short), NN, stdin);
+      if (feof(stdin))
+         break;
+      vad = speex_preprocess(st, in, NULL);
+      /*fprintf (stderr, "%d\n", vad);*/
+      fwrite(in, sizeof(short), NN, stdout);
+      count++;
+   }
+   speex_preprocess_state_destroy(st);
+   return 0;
+}

Added: freeswitch/trunk/libs/speex/libspeex/testecho.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/testecho.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,53 @@
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include "speex/speex_echo.h"
+#include "speex/speex_preprocess.h"
+
+
+#define NN 128
+#define TAIL 1024
+
+int main(int argc, char **argv)
+{
+   int echo_fd, ref_fd, e_fd;
+   spx_int32_t noise[NN+1];
+   short echo_buf[NN], ref_buf[NN], e_buf[NN];
+   SpeexEchoState *st;
+   SpeexPreprocessState *den;
+
+   if (argc != 4)
+   {
+      fprintf (stderr, "testecho mic_signal.sw speaker_signal.sw output.sw\n");
+      exit(1);
+   }
+   echo_fd = open (argv[2], O_RDONLY);
+   ref_fd  = open (argv[1],  O_RDONLY);
+   e_fd    = open (argv[3], O_WRONLY | O_CREAT | O_TRUNC, 0644);
+
+   st = speex_echo_state_init(NN, TAIL);
+   den = speex_preprocess_state_init(NN, 8000);
+   int tmp = 8000;
+   speex_echo_ctl(st, SPEEX_ECHO_SET_SAMPLING_RATE, &tmp);
+
+   while (read(ref_fd, ref_buf, NN*2))
+   {
+      read(echo_fd, echo_buf, NN*2);
+      speex_echo_cancel(st, ref_buf, echo_buf, e_buf, noise);
+      /*speex_preprocess(den, e_buf, noise);*/
+      write(e_fd, e_buf, NN*2);
+   }
+   speex_echo_state_destroy(st);
+   speex_preprocess_state_destroy(den);
+   close(e_fd);
+   close(echo_fd);
+   close(ref_fd);
+   return 0;
+}

Added: freeswitch/trunk/libs/speex/libspeex/testenc.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/testenc.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,142 @@
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <speex/speex.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <speex/speex_callbacks.h>
+
+#ifdef FIXED_DEBUG
+extern long long spx_mips;
+#endif
+
+#define FRAME_SIZE 160
+#include <math.h>
+int main(int argc, char **argv)
+{
+   char *inFile, *outFile, *bitsFile;
+   FILE *fin, *fout, *fbits=NULL;
+   short in_short[FRAME_SIZE];
+   short out_short[FRAME_SIZE];
+   float sigpow,errpow,snr, seg_snr=0;
+   int snr_frames = 0;
+   char cbits[200];
+   int nbBits;
+   int i;
+   void *st;
+   void *dec;
+   SpeexBits bits;
+   spx_int32_t tmp;
+   int bitCount=0;
+   spx_int32_t skip_group_delay;
+   SpeexCallback callback;
+
+   sigpow = 0;
+   errpow = 0;
+
+   st = speex_encoder_init(&speex_nb_mode);
+   dec = speex_decoder_init(&speex_nb_mode);
+
+   /* BEGIN: You probably don't need the following in a real application */
+   callback.callback_id = SPEEX_INBAND_CHAR;
+   callback.func = speex_std_char_handler;
+   callback.data = stderr;
+   speex_decoder_ctl(dec, SPEEX_SET_HANDLER, &callback);
+
+   callback.callback_id = SPEEX_INBAND_MODE_REQUEST;
+   callback.func = speex_std_mode_request_handler;
+   callback.data = st;
+   speex_decoder_ctl(dec, SPEEX_SET_HANDLER, &callback);
+   /* END of unnecessary stuff */
+
+   tmp=1;
+   speex_decoder_ctl(dec, SPEEX_SET_ENH, &tmp);
+   tmp=0;
+   speex_encoder_ctl(st, SPEEX_SET_VBR, &tmp);
+   tmp=8;
+   speex_encoder_ctl(st, SPEEX_SET_QUALITY, &tmp);
+   tmp=1;
+   speex_encoder_ctl(st, SPEEX_SET_COMPLEXITY, &tmp);
+
+   /* Turn this off if you want to measure SNR (on by default) */
+   tmp=1;
+   speex_encoder_ctl(st, SPEEX_SET_HIGHPASS, &tmp);
+   speex_decoder_ctl(dec, SPEEX_SET_HIGHPASS, &tmp);
+
+   speex_encoder_ctl(st, SPEEX_GET_LOOKAHEAD, &skip_group_delay);
+   speex_decoder_ctl(dec, SPEEX_GET_LOOKAHEAD, &tmp);
+   skip_group_delay += tmp;
+
+   if (argc != 4 && argc != 3)
+   {
+      fprintf (stderr, "Usage: encode [in file] [out file] [bits file]\nargc = %d", argc);
+      exit(1);
+   }
+   inFile = argv[1];
+   fin = fopen(inFile, "r");
+   outFile = argv[2];
+   fout = fopen(outFile, "w+");
+   if (argc==4)
+   {
+      bitsFile = argv[3];
+      fbits = fopen(bitsFile, "w");
+   }
+   speex_bits_init(&bits);
+   while (!feof(fin))
+   {
+      fread(in_short, sizeof(short), FRAME_SIZE, fin);
+      if (feof(fin))
+         break;
+      speex_bits_reset(&bits);
+
+      speex_encode_int(st, in_short, &bits);
+      nbBits = speex_bits_write(&bits, cbits, 200);
+      bitCount+=bits.nbBits;
+
+      if (argc==4)
+         fwrite(cbits, 1, nbBits, fbits);
+      speex_bits_rewind(&bits);
+
+      speex_decode_int(dec, &bits, out_short);
+      speex_bits_reset(&bits);
+
+      fwrite(&out_short[skip_group_delay], sizeof(short), FRAME_SIZE-skip_group_delay, fout);
+      skip_group_delay = 0;
+   }
+   fprintf (stderr, "Total encoded size: %d bits\n", bitCount);
+   speex_encoder_destroy(st);
+   speex_decoder_destroy(dec);
+   speex_bits_destroy(&bits);
+
+   /* This code just computes SNR, so you don't need it either */
+   rewind(fin);
+   rewind(fout);
+
+   while ( FRAME_SIZE == fread(in_short, sizeof(short), FRAME_SIZE, fin) 
+           &&
+           FRAME_SIZE ==  fread(out_short, sizeof(short), FRAME_SIZE,fout) )
+   {
+	float s=0, e=0;
+        for (i=0;i<FRAME_SIZE;++i) {
+            s += (float)in_short[i] * in_short[i];
+            e += ((float)in_short[i]-out_short[i]) * ((float)in_short[i]-out_short[i]);
+        }
+	seg_snr += 10*log10((s+160)/(e+160));
+	sigpow += s;
+	errpow += e;
+	snr_frames++;
+   }
+   fclose(fin);
+   fclose(fout);
+
+   snr = 10 * log10( sigpow / errpow );
+   seg_snr /= snr_frames;
+   fprintf(stderr,"SNR = %f\nsegmental SNR = %f\n",snr, seg_snr);
+
+#ifdef FIXED_DEBUG
+   printf ("Total: %f MIPS\n", (float)(1e-6*50*spx_mips/snr_frames));
+#endif
+   
+   return 0;
+}

Added: freeswitch/trunk/libs/speex/libspeex/testenc_uwb.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/testenc_uwb.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,137 @@
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <speex/speex.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <speex/speex_callbacks.h>
+
+#ifdef FIXED_DEBUG
+extern long long spx_mips;
+#endif
+
+#define FRAME_SIZE 640
+#include <math.h>
+int main(int argc, char **argv)
+{
+   char *inFile, *outFile, *bitsFile;
+   FILE *fin, *fout, *fbits=NULL;
+   short in_short[FRAME_SIZE];
+   short out_short[FRAME_SIZE];
+   float in_float[FRAME_SIZE];
+   float sigpow,errpow,snr, seg_snr=0;
+   int snr_frames = 0;
+   char cbits[200];
+   int nbBits;
+   int i;
+   void *st;
+   void *dec;
+   SpeexBits bits;
+   spx_int32_t tmp;
+   int bitCount=0;
+   spx_int32_t skip_group_delay;
+   SpeexCallback callback;
+
+   sigpow = 0;
+   errpow = 0;
+
+   st = speex_encoder_init(&speex_uwb_mode);
+   dec = speex_decoder_init(&speex_uwb_mode);
+
+   callback.callback_id = SPEEX_INBAND_CHAR;
+   callback.func = speex_std_char_handler;
+   callback.data = stderr;
+   speex_decoder_ctl(dec, SPEEX_SET_HANDLER, &callback);
+
+   callback.callback_id = SPEEX_INBAND_MODE_REQUEST;
+   callback.func = speex_std_mode_request_handler;
+   callback.data = st;
+   speex_decoder_ctl(dec, SPEEX_SET_HANDLER, &callback);
+
+   tmp=0;
+   speex_decoder_ctl(dec, SPEEX_SET_ENH, &tmp);
+   tmp=0;
+   speex_encoder_ctl(st, SPEEX_SET_VBR, &tmp);
+   tmp=7;
+   speex_encoder_ctl(st, SPEEX_SET_QUALITY, &tmp);
+   tmp=1;
+   speex_encoder_ctl(st, SPEEX_SET_COMPLEXITY, &tmp);
+
+   speex_encoder_ctl(st, SPEEX_GET_LOOKAHEAD, &skip_group_delay);
+   speex_decoder_ctl(dec, SPEEX_GET_LOOKAHEAD, &tmp);
+   skip_group_delay += tmp;
+
+
+   if (argc != 4 && argc != 3)
+   {
+      fprintf (stderr, "Usage: encode [in file] [out file] [bits file]\nargc = %d", argc);
+      exit(1);
+   }
+   inFile = argv[1];
+   fin = fopen(inFile, "r");
+   outFile = argv[2];
+   fout = fopen(outFile, "w+");
+   if (argc==4)
+   {
+      bitsFile = argv[3];
+      fbits = fopen(bitsFile, "w");
+   }
+   speex_bits_init(&bits);
+   while (!feof(fin))
+   {
+      fread(in_short, sizeof(short), FRAME_SIZE, fin);
+      if (feof(fin))
+         break;
+      for (i=0;i<FRAME_SIZE;i++)
+         in_float[i]=in_short[i];
+      speex_bits_reset(&bits);
+
+      speex_encode_int(st, in_short, &bits);
+      nbBits = speex_bits_write(&bits, cbits, 200);
+      bitCount+=bits.nbBits;
+
+      if (argc==4)
+         fwrite(cbits, 1, nbBits, fbits);
+      speex_bits_rewind(&bits);
+
+      speex_decode_int(dec, &bits, out_short);
+      speex_bits_reset(&bits);
+
+      fwrite(&out_short[skip_group_delay], sizeof(short), FRAME_SIZE-skip_group_delay, fout);
+      skip_group_delay = 0;
+   }
+   fprintf (stderr, "Total encoded size: %d bits\n", bitCount);
+   speex_encoder_destroy(st);
+   speex_decoder_destroy(dec);
+
+   rewind(fin);
+   rewind(fout);
+
+   while ( FRAME_SIZE == fread(in_short, sizeof(short), FRAME_SIZE, fin) 
+           &&
+           FRAME_SIZE ==  fread(out_short, sizeof(short), FRAME_SIZE,fout) )
+   {
+	float s=0, e=0;
+        for (i=0;i<FRAME_SIZE;++i) {
+            s += (float)in_short[i] * in_short[i];
+            e += ((float)in_short[i]-out_short[i]) * ((float)in_short[i]-out_short[i]);
+        }
+	seg_snr += 10*log10((s+1)/(e+1));
+	sigpow += s;
+	errpow += e;
+	snr_frames++;
+   }
+   fclose(fin);
+   fclose(fout);
+
+   snr = 10 * log10( sigpow / errpow );
+   seg_snr /= snr_frames;
+   fprintf(stderr,"SNR = %f\nsegmental SNR = %f\n",snr, seg_snr);
+
+#ifdef FIXED_DEBUG
+   printf ("Total: %f MIPS\n", (float)(1e-6*50*spx_mips/snr_frames));
+#endif
+   
+   return 1;
+}

Added: freeswitch/trunk/libs/speex/libspeex/testenc_wb.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/testenc_wb.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,143 @@
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <speex/speex.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <speex/speex_callbacks.h>
+
+#ifdef FIXED_DEBUG
+extern long long spx_mips;
+#endif
+
+#define FRAME_SIZE 320
+#include <math.h>
+int main(int argc, char **argv)
+{
+   char *inFile, *outFile, *bitsFile;
+   FILE *fin, *fout, *fbits=NULL;
+   short in_short[FRAME_SIZE];
+   short out_short[FRAME_SIZE];
+   float in_float[FRAME_SIZE];
+   float sigpow,errpow,snr, seg_snr=0;
+   int snr_frames = 0;
+   char cbits[200];
+   int nbBits;
+   int i;
+   void *st;
+   void *dec;
+   SpeexBits bits;
+   spx_int32_t tmp;
+   int bitCount=0;
+   spx_int32_t skip_group_delay;
+   SpeexCallback callback;
+
+   sigpow = 0;
+   errpow = 0;
+
+   st = speex_encoder_init(&speex_wb_mode);
+   dec = speex_decoder_init(&speex_wb_mode);
+
+   callback.callback_id = SPEEX_INBAND_CHAR;
+   callback.func = speex_std_char_handler;
+   callback.data = stderr;
+   speex_decoder_ctl(dec, SPEEX_SET_HANDLER, &callback);
+
+   callback.callback_id = SPEEX_INBAND_MODE_REQUEST;
+   callback.func = speex_std_mode_request_handler;
+   callback.data = st;
+   speex_decoder_ctl(dec, SPEEX_SET_HANDLER, &callback);
+
+   tmp=1;
+   speex_decoder_ctl(dec, SPEEX_SET_ENH, &tmp);
+   tmp=0;
+   speex_encoder_ctl(st, SPEEX_SET_VBR, &tmp);
+   tmp=8;
+   speex_encoder_ctl(st, SPEEX_SET_QUALITY, &tmp);
+   tmp=3;
+   speex_encoder_ctl(st, SPEEX_SET_COMPLEXITY, &tmp);
+   /*tmp=3;
+   speex_encoder_ctl(st, SPEEX_SET_HIGH_MODE, &tmp);
+   tmp=6;
+   speex_encoder_ctl(st, SPEEX_SET_LOW_MODE, &tmp);
+*/
+
+   speex_encoder_ctl(st, SPEEX_GET_LOOKAHEAD, &skip_group_delay);
+   speex_decoder_ctl(dec, SPEEX_GET_LOOKAHEAD, &tmp);
+   skip_group_delay += tmp;
+
+
+   if (argc != 4 && argc != 3)
+   {
+      fprintf (stderr, "Usage: encode [in file] [out file] [bits file]\nargc = %d", argc);
+      exit(1);
+   }
+   inFile = argv[1];
+   fin = fopen(inFile, "r");
+   outFile = argv[2];
+   fout = fopen(outFile, "w+");
+   if (argc==4)
+   {
+      bitsFile = argv[3];
+      fbits = fopen(bitsFile, "w");
+   }
+   speex_bits_init(&bits);
+   while (!feof(fin))
+   {
+      fread(in_short, sizeof(short), FRAME_SIZE, fin);
+      if (feof(fin))
+         break;
+      for (i=0;i<FRAME_SIZE;i++)
+         in_float[i]=in_short[i];
+      speex_bits_reset(&bits);
+
+      speex_encode_int(st, in_short, &bits);
+      nbBits = speex_bits_write(&bits, cbits, 200);
+      bitCount+=bits.nbBits;
+
+      if (argc==4)
+         fwrite(cbits, 1, nbBits, fbits);
+      speex_bits_rewind(&bits);
+
+      speex_decode_int(dec, &bits, out_short);
+      speex_bits_reset(&bits);
+
+      fwrite(&out_short[skip_group_delay], sizeof(short), FRAME_SIZE-skip_group_delay, fout);
+      skip_group_delay = 0;
+   }
+   fprintf (stderr, "Total encoded size: %d bits\n", bitCount);
+   speex_encoder_destroy(st);
+   speex_decoder_destroy(dec);
+   speex_bits_destroy(&bits);
+
+   rewind(fin);
+   rewind(fout);
+
+   while ( FRAME_SIZE == fread(in_short, sizeof(short), FRAME_SIZE, fin) 
+           &&
+           FRAME_SIZE ==  fread(out_short, sizeof(short), FRAME_SIZE,fout) )
+   {
+	float s=0, e=0;
+        for (i=0;i<FRAME_SIZE;++i) {
+            s += (float)in_short[i] * in_short[i];
+            e += ((float)in_short[i]-out_short[i]) * ((float)in_short[i]-out_short[i]);
+        }
+	seg_snr += 10*log10((s+160)/(e+160));
+	sigpow += s;
+	errpow += e;
+	snr_frames++;
+   }
+   fclose(fin);
+   fclose(fout);
+
+   snr = 10 * log10( sigpow / errpow );
+   seg_snr /= snr_frames;
+   fprintf(stderr,"SNR = %f\nsegmental SNR = %f\n",snr, seg_snr);
+
+#ifdef FIXED_DEBUG
+   printf ("Total: %f MIPS\n", (float)(1e-6*50*spx_mips/snr_frames));
+#endif
+   
+   return 1;
+}

Added: freeswitch/trunk/libs/speex/libspeex/vbr.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/vbr.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,272 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: vbr.c
+
+   VBR-related routines
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "vbr.h"
+#include <math.h>
+
+
+#define sqr(x) ((x)*(x))
+
+#define MIN_ENERGY 6000
+#define NOISE_POW .3
+
+
+const float vbr_nb_thresh[9][11]={
+   {-1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0}, /*   CNG   */
+   { 3.5,  2.5,  2.0,  1.2,  0.5,  0.0, -0.5, -0.7, -0.8, -0.9, -1.0}, /*  2 kbps */
+   {10.0,  6.5,  5.2,  4.5,  3.9,  3.5,  3.0,  2.5,  2.3,  1.8,  1.0}, /*  6 kbps */
+   {11.0,  8.8,  7.5,  6.5,  5.0,  3.9,  3.9,  3.9,  3.5,  3.0,  1.0}, /*  8 kbps */
+   {11.0, 11.0,  9.9,  9.0,  8.0,  7.0,  6.5,  6.0,  5.0,  4.0,  2.0}, /* 11 kbps */
+   {11.0, 11.0, 11.0, 11.0,  9.5,  9.0,  8.0,  7.0,  6.5,  5.0,  3.0}, /* 15 kbps */
+   {11.0, 11.0, 11.0, 11.0, 11.0, 11.0,  9.5,  8.5,  8.0,  6.5,  4.0}, /* 18 kbps */
+   {11.0, 11.0, 11.0, 11.0, 11.0, 11.0, 11.0, 11.0,  9.8,  7.5,  5.5}, /* 24 kbps */ 
+   { 8.0,  5.0,  3.7,  3.0,  2.5,  2.0,  1.8,  1.5,  1.0,  0.0,  0.0}  /*  4 kbps */
+};
+
+
+const float vbr_hb_thresh[5][11]={
+   {-1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0}, /* silence */
+   {-1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0}, /*  2 kbps */
+   {11.0, 11.0,  9.5,  8.5,  7.5,  6.0,  5.0,  3.9,  3.0,  2.0,  1.0}, /*  6 kbps */
+   {11.0, 11.0, 11.0, 11.0, 11.0,  9.5,  8.7,  7.8,  7.0,  6.5,  4.0}, /* 10 kbps */
+   {11.0, 11.0, 11.0, 11.0, 11.0, 11.0, 11.0, 11.0,  9.8,  7.5,  5.5}  /* 18 kbps */ 
+};
+
+const float vbr_uhb_thresh[2][11]={
+   {-1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0}, /* silence */
+   { 3.9,  2.5,  0.0,  0.0,  0.0,  0.0,  0.0,  0.0,  0.0,  0.0, -1.0}  /*  2 kbps */
+};
+
+void vbr_init(VBRState *vbr)
+{
+   int i;
+
+   vbr->average_energy=0;
+   vbr->last_energy=1;
+   vbr->accum_sum=0;
+   vbr->energy_alpha=.1;
+   vbr->soft_pitch=0;
+   vbr->last_pitch_coef=0;
+   vbr->last_quality=0;
+
+   vbr->noise_accum = .05*pow(MIN_ENERGY, NOISE_POW);
+   vbr->noise_accum_count=.05;
+   vbr->noise_level=vbr->noise_accum/vbr->noise_accum_count;
+   vbr->consec_noise=0;
+
+
+   for (i=0;i<VBR_MEMORY_SIZE;i++)
+      vbr->last_log_energy[i] = log(MIN_ENERGY);
+}
+
+
+/*
+  This function should analyse the signal and decide how critical the
+  coding error will be perceptually. The following factors should be
+  taken into account:
+
+  -Attacks (positive energy derivative) should be coded with more bits
+
+  -Stationary voiced segments should receive more bits
+
+  -Segments with (very) low absolute energy should receive less bits (maybe
+  only shaped noise?)
+
+  -DTX for near-zero energy?
+
+  -Stationary fricative segments should have less bits
+
+  -Temporal masking: when energy slope is decreasing, decrease the bit-rate
+
+  -Decrease bit-rate for males (low pitch)?
+
+  -(wideband only) less bits in the high-band when signal is very 
+  non-stationary (harder to notice high-frequency noise)???
+
+*/
+
+float vbr_analysis(VBRState *vbr, spx_word16_t *sig, int len, int pitch, float pitch_coef)
+{
+   int i;
+   float ener=0, ener1=0, ener2=0;
+   float qual=7;
+   int va;
+   float log_energy;
+   float non_st=0;
+   float voicing;
+   float pow_ener;
+
+   for (i=0;i<len>>1;i++)
+      ener1 += ((float)sig[i])*sig[i];
+
+   for (i=len>>1;i<len;i++)
+      ener2 += ((float)sig[i])*sig[i];
+   ener=ener1+ener2;
+
+   log_energy = log(ener+MIN_ENERGY);
+   for (i=0;i<VBR_MEMORY_SIZE;i++)
+      non_st += sqr(log_energy-vbr->last_log_energy[i]);
+   non_st =  non_st/(30*VBR_MEMORY_SIZE);
+   if (non_st>1)
+      non_st=1;
+
+   voicing = 3*(pitch_coef-.4)*fabs(pitch_coef-.4);
+   vbr->average_energy = (1-vbr->energy_alpha)*vbr->average_energy + vbr->energy_alpha*ener;
+   vbr->noise_level=vbr->noise_accum/vbr->noise_accum_count;
+   pow_ener = pow(ener,NOISE_POW);
+   if (vbr->noise_accum_count<.06 && ener>MIN_ENERGY)
+      vbr->noise_accum = .05*pow_ener;
+
+   if ((voicing<.3 && non_st < .2 && pow_ener < 1.2*vbr->noise_level)
+       || (voicing<.3 && non_st < .05 && pow_ener < 1.5*vbr->noise_level)
+       || (voicing<.4 && non_st < .05 && pow_ener < 1.2*vbr->noise_level)
+       || (voicing<0 && non_st < .05))
+   {
+      float tmp;
+      va = 0;
+      vbr->consec_noise++;
+      if (pow_ener > 3*vbr->noise_level)
+         tmp = 3*vbr->noise_level;
+      else 
+         tmp = pow_ener;
+      if (vbr->consec_noise>=4)
+      {
+         vbr->noise_accum = .95*vbr->noise_accum + .05*tmp;
+         vbr->noise_accum_count = .95*vbr->noise_accum_count + .05;
+      }
+   } else {
+      va = 1;
+      vbr->consec_noise=0;
+   }
+
+   if (pow_ener < vbr->noise_level && ener>MIN_ENERGY)
+   {
+      vbr->noise_accum = .95*vbr->noise_accum + .05*pow_ener;
+      vbr->noise_accum_count = .95*vbr->noise_accum_count + .05;      
+   }
+
+   /* Checking for very low absolute energy */
+   if (ener < 30000)
+   {
+      qual -= .7;
+      if (ener < 10000)
+         qual-=.7;
+      if (ener < 3000)
+         qual-=.7;
+   } else {
+      float short_diff, long_diff;
+      short_diff = log((ener+1)/(1+vbr->last_energy));
+      long_diff = log((ener+1)/(1+vbr->average_energy));
+      /*fprintf (stderr, "%f %f\n", short_diff, long_diff);*/
+
+      if (long_diff<-5)
+         long_diff=-5;
+      if (long_diff>2)
+         long_diff=2;
+
+      if (long_diff>0)
+         qual += .6*long_diff;
+      if (long_diff<0)
+         qual += .5*long_diff;
+      if (short_diff>0)
+      {
+         if (short_diff>5)
+            short_diff=5;
+         qual += .5*short_diff;
+      }
+      /* Checking for energy increases */
+      if (ener2 > 1.6*ener1)
+         qual += .5;
+   }
+   vbr->last_energy = ener;
+   vbr->soft_pitch = .6*vbr->soft_pitch + .4*pitch_coef;
+   qual += 2.2*((pitch_coef-.4) + (vbr->soft_pitch-.4));
+
+   if (qual < vbr->last_quality)
+      qual = .5*qual + .5*vbr->last_quality;
+   if (qual<4)
+      qual=4;
+   if (qual>10)
+      qual=10;
+   
+   /*
+   if (vbr->consec_noise>=2)
+      qual-=1.3;
+   if (vbr->consec_noise>=5)
+      qual-=1.3;
+   if (vbr->consec_noise>=12)
+      qual-=1.3;
+   */
+   if (vbr->consec_noise>=3)
+      qual=4;
+
+   if (vbr->consec_noise)
+      qual -= 1.0 * (log(3.0 + vbr->consec_noise)-log(3));
+   if (qual<0)
+      qual=0;
+   
+   if (ener<60000)
+   {
+      if (vbr->consec_noise>2)
+         qual-=0.5*(log(3.0 + vbr->consec_noise)-log(3));
+      if (ener<10000&&vbr->consec_noise>2)
+         qual-=0.5*(log(3.0 + vbr->consec_noise)-log(3));
+      if (qual<0)
+         qual=0;
+      qual += .3*log(.0001+ener/60000.0);
+   }
+   if (qual<-1)
+      qual=-1;
+
+   /*printf ("%f %f %f %f %d\n", qual, voicing, non_st, pow_ener/(.01+vbr->noise_level), va);*/
+
+   vbr->last_pitch_coef = pitch_coef;
+   vbr->last_quality = qual;
+
+   for (i=VBR_MEMORY_SIZE-1;i>0;i--)
+      vbr->last_log_energy[i] = vbr->last_log_energy[i-1];
+   vbr->last_log_energy[0] = log_energy;
+
+   /*printf ("VBR: %f %f %f %d %f\n", (float)(log_energy-log(vbr->average_energy+MIN_ENERGY)), non_st, voicing, va, vbr->noise_level);*/
+
+   return qual;
+}
+
+void vbr_destroy(VBRState *vbr)
+{
+}

Added: freeswitch/trunk/libs/speex/libspeex/vbr.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/vbr.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,70 @@
+/* Copyright (C) 2002 Jean-Marc Valin */
+/**
+   @file vbr.h
+   @brief Variable Bit-Rate (VBR) related routines
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+
+#ifndef VBR_H
+#define VBR_H
+
+#include "misc.h"
+
+#define VBR_MEMORY_SIZE 5
+
+extern const float vbr_nb_thresh[9][11];
+extern const float vbr_hb_thresh[5][11];
+extern const float vbr_uhb_thresh[2][11];
+
+/** VBR state. */
+typedef struct VBRState {
+   float energy_alpha;
+   float average_energy;
+   float last_energy;
+   float last_log_energy[VBR_MEMORY_SIZE];
+   float accum_sum;
+   float last_pitch_coef;
+   float soft_pitch;
+   float last_quality;
+   float noise_level;
+   float noise_accum;
+   float noise_accum_count;
+   int   consec_noise;
+} VBRState;
+
+void vbr_init(VBRState *vbr);
+
+float vbr_analysis(VBRState *vbr, spx_word16_t *sig, int len, int pitch, float pitch_coef);
+
+void vbr_destroy(VBRState *vbr);
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/vorbis_psy.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/vorbis_psy.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,508 @@
+/* Copyright (C) 2005 Jean-Marc Valin, CSIRO, Christopher Montgomery
+   File: vorbis_psy.c
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#ifdef VORBIS_PSYCHO
+
+#include "misc.h"
+#include "smallft.h"
+#include "lpc.h"
+#include "vorbis_psy.h"
+
+#include <stdlib.h>
+#include <math.h>
+#include <string.h>
+
+/* psychoacoustic setup ********************************************/
+
+static VorbisPsyInfo example_tuning = {
+  
+  .5,.5,  
+  3,3,25,
+  
+  /*63     125     250     500      1k      2k      4k      8k     16k*/
+  // vorbis mode 4 style
+  //{-32,-32,-32,-32,-28,-24,-22,-20,-20, -20, -20, -8, -6, -6, -6, -6, -6},
+  { -4, -6, -6, -6, -6, -6, -6, -6, -8, -8,-10,-10, -8, -6, -4, -4, -2},
+  
+  {
+    0, 1, 2, 3, 4, 5, 5,  5,     /* 7dB */
+    6, 6, 6, 5, 4, 4, 4,  4,     /* 15dB */
+    4, 4, 5, 5, 5, 6, 6,  6,     /* 23dB */
+    7, 7, 7, 8, 8, 8, 9, 10,     /* 31dB */
+    11,12,13,14,15,16,17, 18,     /* 39dB */
+  }
+
+};
+
+
+
+/* there was no great place to put this.... */
+#include <stdio.h>
+static void _analysis_output(char *base,int i,float *v,int n,int bark,int dB){
+  int j;
+  FILE *of;
+  char buffer[80];
+
+  sprintf(buffer,"%s_%d.m",base,i);
+  of=fopen(buffer,"w");
+  
+  if(!of)perror("failed to open data dump file");
+  
+  for(j=0;j<n;j++){
+    if(bark){
+      float b=toBARK((4000.f*j/n)+.25);
+      fprintf(of,"%f ",b);
+    }else
+      fprintf(of,"%f ",(double)j);
+    
+    if(dB){
+      float val;
+      if(v[j]==0.)
+	val=-140.;
+      else
+	val=todB(v[j]);
+      fprintf(of,"%f\n",val);
+    }else{
+      fprintf(of,"%f\n",v[j]);
+    }
+  }
+  fclose(of);
+}
+
+static void bark_noise_hybridmp(int n,const long *b,
+                                const float *f,
+                                float *noise,
+                                const float offset,
+                                const int fixed){
+  
+  float *N=alloca(n*sizeof(*N));
+  float *X=alloca(n*sizeof(*N));
+  float *XX=alloca(n*sizeof(*N));
+  float *Y=alloca(n*sizeof(*N));
+  float *XY=alloca(n*sizeof(*N));
+
+  float tN, tX, tXX, tY, tXY;
+  int i;
+
+  int lo, hi;
+  float R, A, B, D;
+  float w, x, y;
+
+  tN = tX = tXX = tY = tXY = 0.f;
+
+  y = f[0] + offset;
+  if (y < 1.f) y = 1.f;
+
+  w = y * y * .5;
+    
+  tN += w;
+  tX += w;
+  tY += w * y;
+
+  N[0] = tN;
+  X[0] = tX;
+  XX[0] = tXX;
+  Y[0] = tY;
+  XY[0] = tXY;
+
+  for (i = 1, x = 1.f; i < n; i++, x += 1.f) {
+    
+    y = f[i] + offset;
+    if (y < 1.f) y = 1.f;
+
+    w = y * y;
+    
+    tN += w;
+    tX += w * x;
+    tXX += w * x * x;
+    tY += w * y;
+    tXY += w * x * y;
+
+    N[i] = tN;
+    X[i] = tX;
+    XX[i] = tXX;
+    Y[i] = tY;
+    XY[i] = tXY;
+  }
+  
+  for (i = 0, x = 0.f;; i++, x += 1.f) {
+    
+    lo = b[i] >> 16;
+    if( lo>=0 ) break;
+    hi = b[i] & 0xffff;
+    
+    tN = N[hi] + N[-lo];
+    tX = X[hi] - X[-lo];
+    tXX = XX[hi] + XX[-lo];
+    tY = Y[hi] + Y[-lo];    
+    tXY = XY[hi] - XY[-lo];
+    
+    A = tY * tXX - tX * tXY;
+    B = tN * tXY - tX * tY;
+    D = tN * tXX - tX * tX;
+    R = (A + x * B) / D;
+    if (R < 0.f)
+      R = 0.f;
+    
+    noise[i] = R - offset;
+  }
+  
+  for ( ;; i++, x += 1.f) {
+    
+    lo = b[i] >> 16;
+    hi = b[i] & 0xffff;
+    if(hi>=n)break;
+    
+    tN = N[hi] - N[lo];
+    tX = X[hi] - X[lo];
+    tXX = XX[hi] - XX[lo];
+    tY = Y[hi] - Y[lo];
+    tXY = XY[hi] - XY[lo];
+    
+    A = tY * tXX - tX * tXY;
+    B = tN * tXY - tX * tY;
+    D = tN * tXX - tX * tX;
+    R = (A + x * B) / D;
+    if (R < 0.f) R = 0.f;
+    
+    noise[i] = R - offset;
+  }
+  for ( ; i < n; i++, x += 1.f) {
+    
+    R = (A + x * B) / D;
+    if (R < 0.f) R = 0.f;
+    
+    noise[i] = R - offset;
+  }
+  
+  if (fixed <= 0) return;
+  
+  for (i = 0, x = 0.f;; i++, x += 1.f) {
+    hi = i + fixed / 2;
+    lo = hi - fixed;
+    if(lo>=0)break;
+
+    tN = N[hi] + N[-lo];
+    tX = X[hi] - X[-lo];
+    tXX = XX[hi] + XX[-lo];
+    tY = Y[hi] + Y[-lo];
+    tXY = XY[hi] - XY[-lo];
+    
+    
+    A = tY * tXX - tX * tXY;
+    B = tN * tXY - tX * tY;
+    D = tN * tXX - tX * tX;
+    R = (A + x * B) / D;
+
+    if (R - offset < noise[i]) noise[i] = R - offset;
+  }
+  for ( ;; i++, x += 1.f) {
+    
+    hi = i + fixed / 2;
+    lo = hi - fixed;
+    if(hi>=n)break;
+    
+    tN = N[hi] - N[lo];
+    tX = X[hi] - X[lo];
+    tXX = XX[hi] - XX[lo];
+    tY = Y[hi] - Y[lo];
+    tXY = XY[hi] - XY[lo];
+    
+    A = tY * tXX - tX * tXY;
+    B = tN * tXY - tX * tY;
+    D = tN * tXX - tX * tX;
+    R = (A + x * B) / D;
+    
+    if (R - offset < noise[i]) noise[i] = R - offset;
+  }
+  for ( ; i < n; i++, x += 1.f) {
+    R = (A + x * B) / D;
+    if (R - offset < noise[i]) noise[i] = R - offset;
+  }
+}
+
+static void _vp_noisemask(VorbisPsy *p,
+			  float *logfreq, 
+			  float *logmask){
+
+  int i,n=p->n/2;
+  float *work=alloca(n*sizeof(*work));
+
+  bark_noise_hybridmp(n,p->bark,logfreq,logmask,
+		      140.,-1);
+
+  for(i=0;i<n;i++)work[i]=logfreq[i]-logmask[i];
+
+  bark_noise_hybridmp(n,p->bark,work,logmask,0.,
+		      p->vi->noisewindowfixed);
+
+  for(i=0;i<n;i++)work[i]=logfreq[i]-work[i];
+  
+  {
+    static int seq=0;
+    
+    float work2[n];
+    for(i=0;i<n;i++){
+      work2[i]=logmask[i]+work[i];
+    }
+    
+    //_analysis_output("logfreq",seq,logfreq,n,0,0);
+    //_analysis_output("median",seq,work,n,0,0);
+    //_analysis_output("envelope",seq,work2,n,0,0);
+    seq++;
+  }
+
+  for(i=0;i<n;i++){
+    int dB=logmask[i]+.5;
+    if(dB>=NOISE_COMPAND_LEVELS)dB=NOISE_COMPAND_LEVELS-1;
+    if(dB<0)dB=0;
+    logmask[i]= work[i]+p->vi->noisecompand[dB]+p->noiseoffset[i];
+  }
+
+}
+
+VorbisPsy *vorbis_psy_init(int rate, int n)
+{
+  long i,j,lo=-99,hi=1;
+  VorbisPsy *p = speex_alloc(sizeof(VorbisPsy));
+  memset(p,0,sizeof(*p));
+  
+  p->n = n;
+  spx_drft_init(&p->lookup, n);
+  p->bark = speex_alloc(n*sizeof(*p->bark));
+  p->rate=rate;
+  p->vi = &example_tuning;
+
+  /* BH4 window */
+  p->window = speex_alloc(sizeof(*p->window)*n);
+  float a0 = .35875f;
+  float a1 = .48829f;
+  float a2 = .14128f;
+  float a3 = .01168f;
+  for(i=0;i<n;i++)
+    p->window[i] = //a0 - a1*cos(2.*M_PI/n*(i+.5)) + a2*cos(4.*M_PI/n*(i+.5)) - a3*cos(6.*M_PI/n*(i+.5));
+      sin((i+.5)/n * M_PI)*sin((i+.5)/n * M_PI);
+  /* bark scale lookups */
+  for(i=0;i<n;i++){
+    float bark=toBARK(rate/(2*n)*i); 
+    
+    for(;lo+p->vi->noisewindowlomin<i && 
+	  toBARK(rate/(2*n)*lo)<(bark-p->vi->noisewindowlo);lo++);
+    
+    for(;hi<=n && (hi<i+p->vi->noisewindowhimin ||
+	  toBARK(rate/(2*n)*hi)<(bark+p->vi->noisewindowhi));hi++);
+    
+    p->bark[i]=((lo-1)<<16)+(hi-1);
+
+  }
+
+  /* set up rolling noise median */
+  p->noiseoffset=speex_alloc(n*sizeof(*p->noiseoffset));
+  
+  for(i=0;i<n;i++){
+    float halfoc=toOC((i+.5)*rate/(2.*n))*2.;
+    int inthalfoc;
+    float del;
+    
+    if(halfoc<0)halfoc=0;
+    if(halfoc>=P_BANDS-1)halfoc=P_BANDS-1;
+    inthalfoc=(int)halfoc;
+    del=halfoc-inthalfoc;
+    
+    p->noiseoffset[i]=
+      p->vi->noiseoff[inthalfoc]*(1.-del) + 
+      p->vi->noiseoff[inthalfoc+1]*del;
+    
+  }
+#if 0
+  _analysis_output_always("noiseoff0",ls,p->noiseoffset,n,1,0,0);
+#endif
+
+   return p;
+}
+
+void vorbis_psy_destroy(VorbisPsy *p)
+{
+  if(p){
+    spx_drft_clear(&p->lookup);
+    if(p->bark)
+      speex_free(p->bark);
+    if(p->noiseoffset)
+      speex_free(p->noiseoffset);
+    if(p->window)
+      speex_free(p->window);
+    memset(p,0,sizeof(*p));
+    speex_free(p);
+  }
+}
+
+void compute_curve(VorbisPsy *psy, float *audio, float *curve)
+{
+   int i;
+   float work[psy->n];
+
+   float scale=4.f/psy->n;
+   float scale_dB;
+
+   scale_dB=todB(scale);
+  
+   /* window the PCM data; use a BH4 window, not vorbis */
+   for(i=0;i<psy->n;i++)
+     work[i]=audio[i] * psy->window[i];
+
+   {
+     static int seq=0;
+     
+     //_analysis_output("win",seq,work,psy->n,0,0);
+
+     seq++;
+   }
+
+    /* FFT yields more accurate tonal estimation (not phase sensitive) */
+    spx_drft_forward(&psy->lookup,work);
+
+    /* magnitudes */
+    work[0]=scale_dB+todB(work[0]);
+    for(i=1;i<psy->n-1;i+=2){
+      float temp = work[i]*work[i] + work[i+1]*work[i+1];
+      work[(i+1)>>1] = scale_dB+.5f * todB(temp);
+    }
+
+    /* derive a noise curve */
+    _vp_noisemask(psy,work,curve);
+#define SIDEL 12
+    for (i=0;i<SIDEL;i++)
+    {
+       curve[i]=curve[SIDEL];
+    }
+#define SIDEH 12
+    for (i=0;i<SIDEH;i++)
+    {
+       curve[(psy->n>>1)-i-1]=curve[(psy->n>>1)-SIDEH];
+    }
+    for(i=0;i<((psy->n)>>1);i++)
+       curve[i] = fromdB(1.2*curve[i]+.2*i);
+       //curve[i] = fromdB(0.8*curve[i]+.35*i);
+       //curve[i] = fromdB(0.9*curve[i])*pow(1.0*i+45,1.3);
+}
+
+/* Transform a masking curve (power spectrum) into a pole-zero filter */
+void curve_to_lpc(VorbisPsy *psy, float *curve, float *awk1, float *awk2, int ord)
+{
+   int i;
+   float ac[psy->n];
+   float tmp;
+   int len = psy->n >> 1;
+   for (i=0;i<2*len;i++)
+      ac[i] = 0;
+   for (i=1;i<len;i++)
+      ac[2*i-1] = curve[i];
+   ac[0] = curve[0];
+   ac[2*len-1] = curve[len-1];
+   
+   spx_drft_backward(&psy->lookup, ac);
+   _spx_lpc(awk1, ac, ord);
+   tmp = 1.;
+   for (i=0;i<ord;i++)
+   {
+      tmp *= .99;
+      awk1[i] *= tmp;
+   }
+#if 0
+   for (i=0;i<ord;i++)
+      awk2[i] = 0;
+#else
+   /* Use the second (awk2) filter to correct the first one */
+   for (i=0;i<2*len;i++)
+      ac[i] = 0;   
+   for (i=0;i<ord;i++)
+      ac[i+1] = awk1[i];
+   ac[0] = 1;
+   spx_drft_forward(&psy->lookup, ac);
+   /* Compute (power) response of awk1 (all zero) */
+   ac[0] *= ac[0];
+   for (i=1;i<len;i++)
+      ac[i] = ac[2*i-1]*ac[2*i-1] + ac[2*i]*ac[2*i];
+   ac[len] = ac[2*len-1]*ac[2*len-1];
+   /* Compute correction required */
+   for (i=0;i<len;i++)
+      curve[i] = 1. / (1e-6f+curve[i]*ac[i]);
+
+   for (i=0;i<2*len;i++)
+      ac[i] = 0;
+   for (i=1;i<len;i++)
+      ac[2*i-1] = curve[i];
+   ac[0] = curve[0];
+   ac[2*len-1] = curve[len-1];
+   
+   spx_drft_backward(&psy->lookup, ac);
+   _spx_lpc(awk2, ac, ord);
+   tmp = 1;
+   for (i=0;i<ord;i++)
+   {
+      tmp *= .99;
+      awk2[i] *= tmp;
+   }
+#endif
+}
+
+#if 0
+#include <stdio.h>
+#include <math.h>
+
+#define ORDER 10
+#define CURVE_SIZE 24
+
+int main()
+{
+   int i;
+   float curve[CURVE_SIZE];
+   float awk1[ORDER], awk2[ORDER];
+   for (i=0;i<CURVE_SIZE;i++)
+      scanf("%f ", &curve[i]);
+   for (i=0;i<CURVE_SIZE;i++)
+      curve[i] = pow(10.f, .1*curve[i]);
+   curve_to_lpc(curve, CURVE_SIZE, awk1, awk2, ORDER);
+   for (i=0;i<ORDER;i++)
+      printf("%f ", awk1[i]);
+   printf ("\n");
+   for (i=0;i<ORDER;i++)
+      printf("%f ", awk2[i]);
+   printf ("\n");
+   return 0;
+}
+#endif
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/vorbis_psy.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/vorbis_psy.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,97 @@
+/* Copyright (C) 2005 Jean-Marc Valin, CSIRO, Christopher Montgomery
+   File: vorbis_psy.h
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef VORBIS_PSY_H
+#define VORBIS_PSY_H
+
+#ifdef VORBIS_PSYCHO
+
+#include "smallft.h"
+#define P_BANDS 17      /* 62Hz to 16kHz */
+#define NOISE_COMPAND_LEVELS 40
+
+
+#define todB(x)   ((x)==0?-400.f:log((x)*(x))*4.34294480f)
+#define fromdB(x) (exp((x)*.11512925f))  
+
+/* The bark scale equations are approximations, since the original
+   table was somewhat hand rolled.  The below are chosen to have the
+   best possible fit to the rolled tables, thus their somewhat odd
+   appearance (these are more accurate and over a longer range than
+   the oft-quoted bark equations found in the texts I have).  The
+   approximations are valid from 0 - 30kHz (nyquist) or so.
+
+   all f in Hz, z in Bark */
+
+#define toBARK(n)   (13.1f*atan(.00074f*(n))+2.24f*atan((n)*(n)*1.85e-8f)+1e-4f*(n))
+#define fromBARK(z) (102.f*(z)-2.f*pow(z,2.f)+.4f*pow(z,3.f)+pow(1.46f,z)-1.f)
+
+/* Frequency to octave.  We arbitrarily declare 63.5 Hz to be octave
+   0.0 */
+
+#define toOC(n)     (log(n)*1.442695f-5.965784f)
+#define fromOC(o)   (exp(((o)+5.965784f)*.693147f))
+
+
+typedef struct {
+
+  float noisewindowlo;
+  float noisewindowhi;
+  int   noisewindowlomin;
+  int   noisewindowhimin;
+  int   noisewindowfixed;
+  float noiseoff[P_BANDS];
+  float noisecompand[NOISE_COMPAND_LEVELS];
+
+} VorbisPsyInfo;
+
+
+
+typedef struct {
+  int n;
+  int rate;
+  struct drft_lookup lookup;
+  VorbisPsyInfo *vi;
+
+  float *window;
+  float *noiseoffset;
+  long  *bark;
+
+} VorbisPsy;
+
+
+VorbisPsy *vorbis_psy_init(int rate, int size);
+void vorbis_psy_destroy(VorbisPsy *psy);
+void compute_curve(VorbisPsy *psy, float *audio, float *curve);
+void curve_to_lpc(VorbisPsy *psy, float *curve, float *awk1, float *awk2, int ord);
+
+#endif
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/vq.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/vq.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,170 @@
+/* Copyright (C) 2002 Jean-Marc Valin
+   File: vq.c
+   Vector quantization
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "vq.h"
+#include "stack_alloc.h"
+#include "misc.h"
+
+#ifdef _USE_SSE
+#include <xmmintrin.h>
+#include "vq_sse.h"
+#elif defined(SHORTCUTS) && (defined(ARM4_ASM) || defined(ARM5E_ASM))
+#include "vq_arm4.h"
+#elif defined(BFIN_ASM)
+#include "vq_bfin.h"
+#endif
+
+
+int scal_quant(spx_word16_t in, const spx_word16_t *boundary, int entries)
+{
+   int i=0;
+   while (i<entries-1 && in>boundary[0])
+   {
+      boundary++;
+      i++;
+   }
+   return i;
+}
+
+int scal_quant32(spx_word32_t in, const spx_word32_t *boundary, int entries)
+{
+   int i=0;
+   while (i<entries-1 && in>boundary[0])
+   {
+      boundary++;
+      i++;
+   }
+   return i;
+}
+
+/*Finds the index of the entry in a codebook that best matches the input*/
+int vq_index(float *in, const float *codebook, int len, int entries)
+{
+   int i,j;
+   float min_dist=0;
+   int best_index=0;
+   for (i=0;i<entries;i++)
+   {
+      float dist=0;
+      for (j=0;j<len;j++)
+      {
+         float tmp = in[j]-*codebook++;
+         dist += tmp*tmp;
+      }
+      if (i==0 || dist<min_dist)
+      {
+         min_dist=dist;
+         best_index=i;
+      }
+   }
+   return best_index;
+}
+
+
+#ifndef OVERRIDE_VQ_NBEST
+/*Finds the indices of the n-best entries in a codebook*/
+void vq_nbest(spx_word16_t *in, const spx_word16_t *codebook, int len, int entries, spx_word32_t *E, int N, int *nbest, spx_word32_t *best_dist, char *stack)
+{
+   int i,j,k,used;
+   used = 0;
+   for (i=0;i<entries;i++)
+   {
+      spx_word32_t dist=0;
+      for (j=0;j<len;j++)
+         dist = MAC16_16(dist,in[j],*codebook++);
+#ifdef FIXED_POINT
+      dist=SUB32(SHR32(E[i],1),dist);
+#else
+      dist=.5f*E[i]-dist;
+#endif
+      if (i<N || dist<best_dist[N-1])
+      {
+         for (k=N-1; (k >= 1) && (k > used || dist < best_dist[k-1]); k--)
+         {
+            best_dist[k]=best_dist[k-1];
+            nbest[k] = nbest[k-1];
+         }
+         best_dist[k]=dist;
+         nbest[k]=i;
+         used++;
+      }
+   }
+}
+#endif
+
+
+
+
+#ifndef OVERRIDE_VQ_NBEST_SIGN
+/*Finds the indices of the n-best entries in a codebook with sign*/
+void vq_nbest_sign(spx_word16_t *in, const spx_word16_t *codebook, int len, int entries, spx_word32_t *E, int N, int *nbest, spx_word32_t *best_dist, char *stack)
+{
+   int i,j,k, sign, used;
+   used=0;
+   for (i=0;i<entries;i++)
+   {
+      spx_word32_t dist=0;
+      for (j=0;j<len;j++)
+         dist = MAC16_16(dist,in[j],*codebook++);
+      if (dist>0)
+      {
+         sign=0;
+         dist=-dist;
+      } else
+      {
+         sign=1;
+      }
+#ifdef FIXED_POINT
+      dist = ADD32(dist,SHR32(E[i],1));
+#else
+      dist = ADD32(dist,.5f*E[i]);
+#endif
+      if (i<N || dist<best_dist[N-1])
+      {
+         for (k=N-1; (k >= 1) && (k > used || dist < best_dist[k-1]); k--)
+         {
+            best_dist[k]=best_dist[k-1];
+            nbest[k] = nbest[k-1];
+         }
+         best_dist[k]=dist;
+         nbest[k]=i;
+         used++;
+         if (sign)
+            nbest[k]+=entries;
+      }
+   }
+}
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/vq.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/vq.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,55 @@
+/* Copyright (C) 2002 Jean-Marc Valin */
+/**
+   @file vq.h
+   @brief Vector quantization
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef VQ_H
+#define VQ_H
+
+#include "misc.h"
+
+int scal_quant(spx_word16_t in, const spx_word16_t *boundary, int entries);
+int scal_quant32(spx_word32_t in, const spx_word32_t *boundary, int entries);
+
+int vq_index(float *in, const float *codebook, int len, int entries);
+#ifdef _USE_SSE
+#include <xmmintrin.h>
+void vq_nbest(spx_word16_t *in, const __m128 *codebook, int len, int entries, __m128 *E, int N, int *nbest, spx_word32_t *best_dist, char *stack);
+
+void vq_nbest_sign(spx_word16_t *in, const __m128 *codebook, int len, int entries, __m128 *E, int N, int *nbest, spx_word32_t *best_dist, char *stack);
+#else
+void vq_nbest(spx_word16_t *in, const spx_word16_t *codebook, int len, int entries, spx_word32_t *E, int N, int *nbest, spx_word32_t *best_dist, char *stack);
+
+void vq_nbest_sign(spx_word16_t *in, const spx_word16_t *codebook, int len, int entries, spx_word32_t *E, int N, int *nbest, spx_word32_t *best_dist, char *stack);
+#endif
+
+#endif

Added: freeswitch/trunk/libs/speex/libspeex/vq_arm4.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/vq_arm4.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,115 @@
+/* Copyright (C) 2004 Jean-Marc Valin */
+/**
+   @file vq_arm4.h
+   @brief ARM4-optimized vq routine
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#define OVERRIDE_VQ_NBEST
+void vq_nbest(spx_word16_t *in, const spx_word16_t *codebook, int len, int entries, spx_word32_t *E, int N, int *nbest, spx_word32_t *best_dist, char *stack)
+{
+   int i,j;
+   for (i=0;i<entries;i+=4)
+   {
+#if 1
+      spx_word32_t dist1, dist2, dist3, dist4;
+      int dead1, dead2, dead3, dead4, dead5, dead6, dead7, dead8;
+      __asm__ __volatile__ (
+            "mov %0, #0 \n\t"
+            "mov %1, #0 \n\t"
+            "mov %2, #0 \n\t"
+            "mov %3, #0 \n\t"
+            "mov %10, %4 \n\t"
+            "add %4, %4, %4\n\t"
+            ".vqloop%=:\n\t"
+            "ldrsh %7, [%5], #2 \n\t"
+            "ldrsh %8, [%6] \n\t"
+            "mov %9, %6 \n\t"
+            "mla %0, %7, %8, %0 \n\t"
+            "ldrsh %8, [%9, %4]! \n\t"
+            "mla %1, %7, %8, %1 \n\t"
+            "ldrsh %8, [%9, %4]!\n\t"
+            "mla %2, %7, %8, %2 \n\t"
+            "ldrsh %8, [%9, %4]! \n\t"
+            "mla %3, %7, %8, %3 \n\t"
+            "subs %10, %10, #1 \n\t"
+            "add %6, %6, #2 \n\t"
+            "bne .vqloop%="
+         : "=r" (dist1), "=r" (dist2), "=r" (dist3), "=r" (dist4),
+      "=r" (dead1), "=r" (dead2), "=r" (codebook), "=r" (dead4),
+      "=r" (dead5), "=r" (dead6), "=r" (dead7)
+         : "4" (len), "5" (in), "6" (codebook)
+         : "cc");
+#else
+dist1=dist2=dist3=dist4=0;
+   /*   spx_word32_t dist1=0;
+      spx_word32_t dist2=0;
+      spx_word32_t dist3=0;
+      spx_word32_t dist4=0;*/
+      for (j=0;j<2;j++)
+      {
+         const spx_word16_t *code = codebook;
+         dist1 = MAC16_16(dist1,in[j],*code);
+         code += len;
+         dist2 = MAC16_16(dist2,in[j],*code);
+         code += len;
+         dist3 = MAC16_16(dist3,in[j],*code);
+         code += len;
+         dist4 = MAC16_16(dist4,in[j],*code);
+         codebook++;
+      }
+#endif
+      dist1=SUB32(SHR(*E++,1),dist1);
+      if (dist1<*best_dist || i==0)
+      {
+         *best_dist=dist1;
+         *nbest=i;
+      }
+      dist2=SUB32(SHR(*E++,1),dist2);
+      if (dist2<*best_dist)
+      {
+         *best_dist=dist2;
+         *nbest=i+1;
+      }
+      dist3=SUB32(SHR(*E++,1),dist3);
+      if (dist3<*best_dist)
+      {
+         *best_dist=dist3;
+         *nbest=i+2;
+      }
+      dist4=SUB32(SHR(*E++,1),dist4);
+      if (dist4<*best_dist)
+      {
+         *best_dist=dist4;
+         *nbest=i+3;
+      }
+      codebook += 3*len;
+   }
+}

Added: freeswitch/trunk/libs/speex/libspeex/vq_bfin.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/vq_bfin.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,107 @@
+/* Copyright (C) 2005 Analog Devices */
+/**
+   @file vq_bfin.h
+   @author Jean-Marc Valin 
+   @brief Blackfin-optimized vq routine
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#define OVERRIDE_VQ_NBEST
+void vq_nbest(spx_word16_t *in, const spx_word16_t *codebook, int len, int entries, spx_word32_t *E, int N, int *nbest, spx_word32_t *best_dist, char *stack)
+{
+   if (N==1)
+   {
+      best_dist[0] = 2147483647;
+      {
+         spx_word32_t dist;
+         __asm__ __volatile__
+               (
+            "LC0 = %8;\n\t"
+            "R2 = 0;\n\t"
+            "I0 = %6;\n\t"
+            "B0 = %6;\n\t"
+            "L0 = %9;\n\t"
+            "LOOP entries_loop%= LC0;\n\t"
+            "LOOP_BEGIN entries_loop%=;\n\t"
+               "%0 = [%4++];\n\t"
+               "%0 >>= 1;\n\t"
+               "A0 = %0;\n\t"
+               "R0.L = W[%1++%7] || R1.L = W[I0++];\n\t"
+               "LOOP vq_loop%= LC1 = %5;\n\t"
+               "LOOP_BEGIN vq_loop%=;\n\t"
+                  "%0 = (A0 -= R0.L*R1.L) (IS) || R0.L = W[%1++%7] || R1.L = W[I0++];\n\t"
+               "LOOP_END vq_loop%=;\n\t"
+               "%0 = (A0 -= R0.L*R1.L) (IS);\n\t"
+               "cc = %0 < %2;\n\t"
+               "if cc %2 = %0;\n\t"
+               "if cc %3 = R2;\n\t"
+               "R2 += 1;\n\t"
+            "LOOP_END entries_loop%=;\n\t"
+            : "=&D" (dist), "=&a" (codebook), "=&d" (best_dist[0]), "=&d" (nbest[0]), "=&a" (E)
+            : "a" (len-1), "a" (in), "a" (2), "d" (entries), "d" (len<<1), "1" (codebook), "4" (E), "2" (best_dist[0]), "3" (nbest[0])
+            : "R0", "R1", "R2", "I0", "L0", "B0", "A0", "cc", "memory"
+               );
+      }
+   } else {
+   int i,k,used;
+   used = 0;
+   for (i=0;i<entries;i++)
+   {
+      spx_word32_t dist;
+      __asm__
+            (
+            "%0 >>= 1;\n\t"
+            "A0 = %0;\n\t"
+            "I0 = %3;\n\t"
+            "L0 = 0;\n\t"
+            "R0.L = W[%1++%4] || R1.L = W[I0++];\n\t"
+            "LOOP vq_loop%= LC0 = %2;\n\t"
+            "LOOP_BEGIN vq_loop%=;\n\t"
+               "%0 = (A0 -= R0.L*R1.L) (IS) || R0.L = W[%1++%4] || R1.L = W[I0++];\n\t"
+            "LOOP_END vq_loop%=;\n\t"
+            "%0 = (A0 -= R0.L*R1.L) (IS);\n\t"
+         : "=D" (dist), "=a" (codebook)
+         : "a" (len-1), "a" (in), "a" (2), "1" (codebook), "0" (E[i])
+         : "R0", "R1", "I0", "L0", "A0"
+            );
+      if (i<N || dist<best_dist[N-1])
+      {
+         for (k=N-1; (k >= 1) && (k > used || dist < best_dist[k-1]); k--)
+         {
+            best_dist[k]=best_dist[k-1];
+            nbest[k] = nbest[k-1];
+         }
+         best_dist[k]=dist;
+         nbest[k]=i;
+         used++;
+      }
+   }
+   }
+}

Added: freeswitch/trunk/libs/speex/libspeex/vq_sse.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/vq_sse.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,120 @@
+/* Copyright (C) 2004 Jean-Marc Valin */
+/**
+   @file vq_sse.h
+   @brief SSE-optimized vq routine
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#define OVERRIDE_VQ_NBEST
+void vq_nbest(spx_word16_t *_in, const __m128 *codebook, int len, int entries, __m128 *E, int N, int *nbest, spx_word32_t *best_dist, char *stack)
+{
+   int i,j,k,used;
+   VARDECL(float *dist);
+   VARDECL(__m128 *in);
+   __m128 half;
+   used = 0;
+   ALLOC(dist, entries, float);
+   half = _mm_set_ps1(.5f);
+   ALLOC(in, len, __m128);
+   for (i=0;i<len;i++)
+      in[i] = _mm_set_ps1(_in[i]);
+   for (i=0;i<entries>>2;i++)
+   {
+      __m128 d = _mm_mul_ps(E[i], half);
+      for (j=0;j<len;j++)
+         d = _mm_sub_ps(d, _mm_mul_ps(in[j], *codebook++));
+      _mm_storeu_ps(dist+4*i, d);
+   }
+   for (i=0;i<entries;i++)
+   {
+      if (i<N || dist[i]<best_dist[N-1])
+      {
+         for (k=N-1; (k >= 1) && (k > used || dist[i] < best_dist[k-1]); k--)
+         {
+            best_dist[k]=best_dist[k-1];
+            nbest[k] = nbest[k-1];
+         }
+         best_dist[k]=dist[i];
+         nbest[k]=i;
+         used++;
+      }
+   }
+}
+
+
+
+
+#define OVERRIDE_VQ_NBEST_SIGN
+void vq_nbest_sign(spx_word16_t *_in, const __m128 *codebook, int len, int entries, __m128 *E, int N, int *nbest, spx_word32_t *best_dist, char *stack)
+{
+   int i,j,k,used;
+   VARDECL(float *dist);
+   VARDECL(__m128 *in);
+   __m128 half;
+   used = 0;
+   ALLOC(dist, entries, float);
+   half = _mm_set_ps1(.5f);
+   ALLOC(in, len, __m128);
+   for (i=0;i<len;i++)
+      in[i] = _mm_set_ps1(_in[i]);
+   for (i=0;i<entries>>2;i++)
+   {
+      __m128 d = _mm_setzero_ps();
+      for (j=0;j<len;j++)
+         d = _mm_add_ps(d, _mm_mul_ps(in[j], *codebook++));
+      _mm_storeu_ps(dist+4*i, d);
+   }
+   for (i=0;i<entries;i++)
+   {
+      int sign;
+      if (dist[i]>0)
+      {
+         sign=0;
+         dist[i]=-dist[i];
+      } else
+      {
+         sign=1;
+      }
+      dist[i] += .5f*((float*)E)[i];
+      if (i<N || dist[i]<best_dist[N-1])
+      {
+         for (k=N-1; (k >= 1) && (k > used || dist[i] < best_dist[k-1]); k--)
+         {
+            best_dist[k]=best_dist[k-1];
+            nbest[k] = nbest[k-1];
+         }
+         best_dist[k]=dist[i];
+         nbest[k]=i;
+         used++;
+         if (sign)
+            nbest[k]+=entries;
+      }
+   }
+}

Added: freeswitch/trunk/libs/speex/libspeex/window.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/libspeex/window.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,94 @@
+/* Copyright (C) 2006 Jean-Marc Valin 
+   File: window.c
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "misc.h"
+
+#ifdef FIXED_POINT
+const spx_word16_t lpc_window[200] = {
+1310, 1313, 1321, 1333, 1352, 1375, 1403, 1436,
+1475, 1518, 1567, 1621, 1679, 1743, 1811, 1884,
+1962, 2044, 2132, 2224, 2320, 2421, 2526, 2636,
+2750, 2868, 2990, 3116, 3246, 3380, 3518, 3659,
+3804, 3952, 4104, 4259, 4417, 4578, 4742, 4909,
+5079, 5251, 5425, 5602, 5781, 5963, 6146, 6331,
+6518, 6706, 6896, 7087, 7280, 7473, 7668, 7863,
+8059, 8256, 8452, 8650, 8847, 9044, 9241, 9438,
+9635, 9831, 10026, 10220, 10414, 10606, 10797, 10987,
+11176, 11363, 11548, 11731, 11912, 12091, 12268, 12443,
+12615, 12785, 12952, 13116, 13277, 13435, 13590, 13742,
+13890, 14035, 14176, 14314, 14448, 14578, 14704, 14826,
+14944, 15058, 15168, 15273, 15374, 15470, 15562, 15649,
+15732, 15810, 15883, 15951, 16015, 16073, 16127, 16175,
+16219, 16257, 16291, 16319, 16342, 16360, 16373, 16381,
+16384, 16384, 16384, 16384, 16384, 16384, 16384, 16384,
+16384, 16384, 16384, 16384, 16384, 16384, 16384, 16384,
+16384, 16384, 16384, 16384, 16384, 16384, 16384, 16384,
+16384, 16384, 16384, 16384, 16384, 16384, 16384, 16384,
+16384, 16384, 16384, 16384, 16384, 16384, 16384, 16384,
+16384, 16384, 16384, 16384, 16384, 16384, 16384, 16384,
+16384, 16384, 16384, 16361, 16294, 16183, 16028, 15830,
+15588, 15304, 14979, 14613, 14207, 13763, 13282, 12766,
+12215, 11631, 11016, 10373, 9702, 9007, 8289, 7551,
+6797, 6028, 5251, 4470, 3695, 2943, 2248, 1696
+};
+#else
+const spx_word16_t lpc_window[200] = {
+   0.080000, 0.080158, 0.080630, 0.081418, 0.082520, 0.083935, 0.085663, 0.087703,
+   0.090052, 0.092710, 0.095674, 0.098943, 0.102514, 0.106385, 0.110553, 0.115015,
+   0.119769, 0.124811, 0.130137, 0.135744, 0.141628, 0.147786, 0.154212, 0.160902,
+   0.167852, 0.175057, 0.182513, 0.190213, 0.198153, 0.206328, 0.214731, 0.223357,
+   0.232200, 0.241254, 0.250513, 0.259970, 0.269619, 0.279453, 0.289466, 0.299651,
+   0.310000, 0.320507, 0.331164, 0.341965, 0.352901, 0.363966, 0.375151, 0.386449,
+   0.397852, 0.409353, 0.420943, 0.432615, 0.444361, 0.456172, 0.468040, 0.479958,
+   0.491917, 0.503909, 0.515925, 0.527959, 0.540000, 0.552041, 0.564075, 0.576091,
+   0.588083, 0.600042, 0.611960, 0.623828, 0.635639, 0.647385, 0.659057, 0.670647,
+   0.682148, 0.693551, 0.704849, 0.716034, 0.727099, 0.738035, 0.748836, 0.759493,
+   0.770000, 0.780349, 0.790534, 0.800547, 0.810381, 0.820030, 0.829487, 0.838746,
+   0.847800, 0.856643, 0.865269, 0.873672, 0.881847, 0.889787, 0.897487, 0.904943,
+   0.912148, 0.919098, 0.925788, 0.932214, 0.938372, 0.944256, 0.949863, 0.955189,
+   0.960231, 0.964985, 0.969447, 0.973615, 0.977486, 0.981057, 0.984326, 0.987290,
+   0.989948, 0.992297, 0.994337, 0.996065, 0.997480, 0.998582, 0.999370, 0.999842,
+   1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
+   1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
+   1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
+   1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
+   1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
+   1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
+   1.000000, 1.000000, 1.000000, 0.998640, 0.994566, 0.987787, 0.978324, 0.966203,
+   0.951458, 0.934131, 0.914270, 0.891931, 0.867179, 0.840084, 0.810723, 0.779182,
+   0.745551, 0.709930, 0.672424, 0.633148, 0.592223, 0.549781, 0.505964, 0.460932,
+   0.414863, 0.367968, 0.320511, 0.272858, 0.225569, 0.179655, 0.137254, 0.103524
+};
+#endif

Added: freeswitch/trunk/libs/speex/ltmain.sh
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ltmain.sh	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,6871 @@
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun configure.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+basename="s,^.*/,,g"
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+progname=`echo "$progpath" | $SED $basename`
+modename="$progname"
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION="1.5.22 Debian 1.5.22-2"
+TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes.
+if test -n "${ZSH_VERSION+set}" ; then
+  setopt NO_GLOB_SUBST
+fi
+
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell, and then maybe $echo will work.
+  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit $EXIT_SUCCESS
+fi
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  SP2NL='tr \040 \012'
+  NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  SP2NL='tr \100 \n'
+  NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+# We save the old values to restore during execute mode.
+if test "${LC_ALL+set}" = set; then
+  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+  save_LANG="$LANG"; LANG=C; export LANG
+fi
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" 	$lt_nl"
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+  $echo "$modename: not configured to build any kind of library" 1>&2
+  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit $EXIT_FAILURE
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+duplicate_deps=no
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+
+#####################################
+# Shell function definitions:
+# This seems to be the best place for them
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$my_tmpdir"; then
+	# Failing that, at least try and use $RANDOM to avoid a race
+	my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+	save_mktempdir_umask=`umask`
+	umask 0077
+	$mkdir "$my_tmpdir"
+	umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || {
+        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
+	exit $EXIT_FAILURE
+      }
+    fi
+
+    $echo "X$my_tmpdir" | $Xsed
+}
+
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
+      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+      win32_nmres=`eval $NM -f posix -A $1 | \
+	$SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $echo $win32_libid_type
+}
+
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	case $arg in
+	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	CC_quoted="$CC_quoted $arg"
+      done
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	    # Double-quote args containing other shell metacharacters.
+	    case $arg in
+	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	      arg="\"$arg\""
+	      ;;
+	    esac
+	    CC_quoted="$CC_quoted $arg"
+	  done
+	    case "$@ " in
+	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  $echo "$modename: unable to infer tagged configuration"
+	  $echo "$modename: specify a tag with \`--tag'" 1>&2
+	  exit $EXIT_FAILURE
+#        else
+#          $echo "$modename: using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+
+    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+      exit $EXIT_FAILURE
+    fi
+}
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+    my_status=""
+
+    $show "${rm}r $my_gentop"
+    $run ${rm}r "$my_gentop"
+    $show "$mkdir $my_gentop"
+    $run $mkdir "$my_gentop"
+    my_status=$?
+    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+      exit $my_status
+    fi
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+      my_xdir="$my_gentop/$my_xlib"
+
+      $show "${rm}r $my_xdir"
+      $run ${rm}r "$my_xdir"
+      $show "$mkdir $my_xdir"
+      $run $mkdir "$my_xdir"
+      exit_status=$?
+      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
+	exit $exit_status
+      fi
+      case $host in
+      *-darwin*)
+	$show "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	if test -z "$run"; then
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
+	  if test -n "$darwin_arches"; then 
+	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+	      lipo -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    ${rm}r unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd "$darwin_orig_dir"
+ 	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	fi # $run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+        ;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+    done
+    func_extract_archives_result="$my_oldobjs"
+}
+# End of Shell function definitions
+#####################################
+
+# Darwin sucks
+eval std_shrext=\"$shrext_cmds\"
+
+disable_libs=no
+
+# Parse our command line options once, thoroughly.
+while test "$#" -gt 0
+do
+  arg="$1"
+  shift
+
+  case $arg in
+  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    case $prev in
+    execute_dlfiles)
+      execute_dlfiles="$execute_dlfiles $arg"
+      ;;
+    tag)
+      tagname="$arg"
+      preserve_args="${preserve_args}=$arg"
+
+      # Check whether tagname contains only valid characters
+      case $tagname in
+      *[!-_A-Za-z0-9,/]*)
+	$echo "$progname: invalid tag name: $tagname" 1>&2
+	exit $EXIT_FAILURE
+	;;
+      esac
+
+      case $tagname in
+      CC)
+	# Don't test for the "default" C tag, as we know, it's there, but
+	# not specially marked.
+	;;
+      *)
+	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
+	  taglist="$taglist $tagname"
+	  # Evaluate the configuration.
+	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
+	else
+	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
+	fi
+	;;
+      esac
+      ;;
+    *)
+      eval "$prev=\$arg"
+      ;;
+    esac
+
+    prev=
+    prevopt=
+    continue
+  fi
+
+  # Have we seen a non-optional argument yet?
+  case $arg in
+  --help)
+    show_help=yes
+    ;;
+
+  --version)
+    $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+    $echo
+    $echo "Copyright (C) 2005  Free Software Foundation, Inc."
+    $echo "This is free software; see the source for copying conditions.  There is NO"
+    $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+    exit $?
+    ;;
+
+  --config)
+    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
+    done
+    exit $?
+    ;;
+
+  --debug)
+    $echo "$progname: enabling shell trace mode"
+    set -x
+    preserve_args="$preserve_args $arg"
+    ;;
+
+  --dry-run | -n)
+    run=:
+    ;;
+
+  --features)
+    $echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      $echo "enable shared libraries"
+    else
+      $echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      $echo "enable static libraries"
+    else
+      $echo "disable static libraries"
+    fi
+    exit $?
+    ;;
+
+  --finish) mode="finish" ;;
+
+  --mode) prevopt="--mode" prev=mode ;;
+  --mode=*) mode="$optarg" ;;
+
+  --preserve-dup-deps) duplicate_deps="yes" ;;
+
+  --quiet | --silent)
+    show=:
+    preserve_args="$preserve_args $arg"
+    ;;
+
+  --tag)
+    prevopt="--tag"
+    prev=tag
+    preserve_args="$preserve_args --tag"
+    ;;
+  --tag=*)
+    set tag "$optarg" ${1+"$@"}
+    shift
+    prev=tag
+    preserve_args="$preserve_args --tag"
+    ;;
+
+  -dlopen)
+    prevopt="-dlopen"
+    prev=execute_dlfiles
+    ;;
+
+  -*)
+    $echo "$modename: unrecognized option \`$arg'" 1>&2
+    $echo "$help" 1>&2
+    exit $EXIT_FAILURE
+    ;;
+
+  *)
+    nonopt="$arg"
+    break
+    ;;
+  esac
+done
+
+if test -n "$prevopt"; then
+  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+  $echo "$help" 1>&2
+  exit $EXIT_FAILURE
+fi
+
+case $disable_libs in
+no) 
+  ;;
+shared)
+  build_libtool_libs=no
+  build_old_libs=yes
+  ;;
+static)
+  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+  ;;
+esac
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+if test -z "$show_help"; then
+
+  # Infer the operation mode.
+  if test -z "$mode"; then
+    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
+    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
+    case $nonopt in
+    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
+      mode=link
+      for arg
+      do
+	case $arg in
+	-c)
+	   mode=compile
+	   break
+	   ;;
+	esac
+      done
+      ;;
+    *db | *dbx | *strace | *truss)
+      mode=execute
+      ;;
+    *install*|cp|mv)
+      mode=install
+      ;;
+    *rm)
+      mode=uninstall
+      ;;
+    *)
+      # If we have no mode, but dlfiles were specified, then do execute mode.
+      test -n "$execute_dlfiles" && mode=execute
+
+      # Just use the default operation mode.
+      if test -z "$mode"; then
+	if test -n "$nonopt"; then
+	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+	else
+	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+	fi
+      fi
+      ;;
+    esac
+  fi
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+    $echo "$help" 1>&2
+    exit $EXIT_FAILURE
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$modename --help --mode=$mode' for more information."
+
+  # These modes are in order of execution frequency so that they run quickly.
+  case $mode in
+  # libtool compile mode
+  compile)
+    modename="$modename: compile"
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg="$arg"
+	arg_mode=normal
+	;;
+
+      target )
+	libobj="$arg"
+	arg_mode=normal
+	continue
+	;;
+
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  if test -n "$libobj" ; then
+	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  arg_mode=target
+	  continue
+	  ;;
+
+	-static | -prefer-pic | -prefer-non-pic)
+	  later="$later $arg"
+	  continue
+	  ;;
+
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
+
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
+
+	-Wc,*)
+	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+	  lastarg=
+	  save_ifs="$IFS"; IFS=','
+ 	  for arg in $args; do
+	    IFS="$save_ifs"
+
+	    # Double-quote args containing other shell metacharacters.
+	    # Many Bourne shells cannot handle close brackets correctly
+	    # in scan sets, so we specify it separately.
+	    case $arg in
+	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	      arg="\"$arg\""
+	      ;;
+	    esac
+	    lastarg="$lastarg $arg"
+	  done
+	  IFS="$save_ifs"
+	  lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+
+	  # Add the arguments to base_compile.
+	  base_compile="$base_compile $lastarg"
+	  continue
+	  ;;
+
+	* )
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg="$srcfile"
+	  srcfile="$arg"
+	  ;;
+	esac  #  case $arg
+	;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
+      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+      case $lastarg in
+      # Double-quote args containing other shell metacharacters.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, and some SunOS ksh mistreat backslash-escaping
+      # in scan sets (worked around with variable expansion),
+      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
+      # at all, so we specify them separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	lastarg="\"$lastarg\""
+	;;
+      esac
+
+      base_compile="$base_compile $lastarg"
+    done # for arg
+
+    case $arg_mode in
+    arg)
+      $echo "$modename: you must specify an argument for -Xcompile"
+      exit $EXIT_FAILURE
+      ;;
+    target)
+      $echo "$modename: you must specify a target with \`-o'" 1>&2
+      exit $EXIT_FAILURE
+      ;;
+    *)
+      # Get the name of the library object.
+      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    xform='[cCFSifmso]'
+    case $libobj in
+    *.ada) xform=ada ;;
+    *.adb) xform=adb ;;
+    *.ads) xform=ads ;;
+    *.asm) xform=asm ;;
+    *.c++) xform=c++ ;;
+    *.cc) xform=cc ;;
+    *.ii) xform=ii ;;
+    *.class) xform=class ;;
+    *.cpp) xform=cpp ;;
+    *.cxx) xform=cxx ;;
+    *.f90) xform=f90 ;;
+    *.for) xform=for ;;
+    *.java) xform=java ;;
+    esac
+
+    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+    case $libobj in
+    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *)
+      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+      exit $EXIT_FAILURE
+      ;;
+    esac
+
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -static)
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+      esac
+    done
+
+    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
+    case $qlibobj in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	qlibobj="\"$qlibobj\"" ;;
+    esac
+    test "X$libobj" != "X$qlibobj" \
+	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
+	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
+    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$xdir" = "X$obj"; then
+      xdir=
+    else
+      xdir=$xdir/
+    fi
+    lobj=${xdir}$objdir/$objname
+
+    if test -z "$base_compile"; then
+      $echo "$modename: you must specify a compilation command" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    $run $rm $removelist
+    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2*)
+      pic_mode=default
+      ;;
+    esac
+    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+      removelist="$removelist $output_obj $lockfile"
+      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
+	$show "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+	$echo "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit $EXIT_FAILURE
+      fi
+      $echo "$srcfile" > "$lockfile"
+    fi
+
+    if test -n "$fix_srcfile_path"; then
+      eval srcfile=\"$fix_srcfile_path\"
+    fi
+    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
+    case $qsrcfile in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+      qsrcfile="\"$qsrcfile\"" ;;
+    esac
+
+    $run $rm "$libobj" "${libobj}T"
+
+    # Create a libtool object file (analogous to a ".la" file),
+    # but don't create it if we're doing a dry run.
+    test -z "$run" && cat > ${libobj}T <<EOF
+# $libobj - a libtool object file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+EOF
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test "$pic_mode" != no; then
+	command="$base_compile $qsrcfile $pic_flag"
+      else
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      fi
+
+      if test ! -d "${xdir}$objdir"; then
+	$show "$mkdir ${xdir}$objdir"
+	$run $mkdir ${xdir}$objdir
+	exit_status=$?
+	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
+	  exit $exit_status
+	fi
+      fi
+
+      if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	command="$command -o $lobj"
+      fi
+
+      $run $rm "$lobj" "$output_obj"
+
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+	test -n "$output_obj" && $run $rm $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	$show "$mv $output_obj $lobj"
+	if $run $mv $output_obj $lobj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Append the name of the PIC object to the libtool object file.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object='$objdir/$objname'
+
+EOF
+
+      # Allow error messages only from the first compilation.
+      if test "$suppress_opt" = yes; then
+        suppress_output=' >/dev/null 2>&1'
+      fi
+    else
+      # No PIC object so indicate it doesn't exist in the libtool
+      # object file.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object=none
+
+EOF
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      if test "$pic_mode" != yes; then
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      else
+	command="$base_compile $qsrcfile $pic_flag"
+      fi
+      if test "$compiler_c_o" = yes; then
+	command="$command -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      command="$command$suppress_output"
+      $run $rm "$obj" "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+	$run $rm $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+	$show "$mv $output_obj $obj"
+	if $run $mv $output_obj $obj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Append the name of the non-PIC object the libtool object file.
+      # Only append if the libtool object file exists.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object='$objname'
+
+EOF
+    else
+      # Append the name of the non-PIC object the libtool object file.
+      # Only append if the libtool object file exists.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object=none
+
+EOF
+    fi
+
+    $run $mv "${libobj}T" "${libobj}"
+
+    # Unlock the critical section if it was locked
+    if test "$need_locks" != no; then
+      $run $rm "$lockfile"
+    fi
+
+    exit $EXIT_SUCCESS
+    ;;
+
+  # libtool link mode
+  link | relink)
+    modename="$modename: link"
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args="$nonopt"
+    base_compile="$nonopt $@"
+    compile_command="$nonopt"
+    finalize_command="$nonopt"
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+
+    avoid_version=no
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    non_pic_objects=
+    notinst_path= # paths that contain not-installed libtool libraries
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -all-static | -static)
+	if test "X$arg" = "X-all-static"; then
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	else
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=built
+	fi
+	build_libtool_libs=no
+	build_old_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg="$1"
+      shift
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+	;;
+      *) qarg=$arg ;;
+      esac
+      libtool_args="$libtool_args $qarg"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  compile_command="$compile_command @OUTPUT@"
+	  finalize_command="$finalize_command @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	dlfiles|dlprefiles)
+	  if test "$preload" = no; then
+	    # Add the symbol object into the linking commands.
+	    compile_command="$compile_command @SYMFILE@"
+	    finalize_command="$finalize_command @SYMFILE@"
+	    preload=yes
+	  fi
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test "$dlself" = no; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test "$prev" = dlprefiles; then
+	      dlself=yes
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test "$prev" = dlfiles; then
+	      dlfiles="$dlfiles $arg"
+	    else
+	      dlprefiles="$dlprefiles $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols="$arg"
+	  if test ! -f "$arg"; then
+	    $echo "$modename: symbol file \`$arg' does not exist"
+	    exit $EXIT_FAILURE
+	  fi
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	inst_prefix)
+	  inst_prefix_dir="$arg"
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat $save_arg`
+	    do
+#	      moreargs="$moreargs $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+		pic_object=
+		non_pic_object=
+
+		# Read the .lo file
+		# If there is no directory component, then add one.
+		case $arg in
+		*/* | *\\*) . $arg ;;
+		*) . ./$arg ;;
+		esac
+
+		if test -z "$pic_object" || \
+		   test -z "$non_pic_object" ||
+		   test "$pic_object" = none && \
+		   test "$non_pic_object" = none; then
+		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+		  exit $EXIT_FAILURE
+		fi
+
+		# Extract subdirectory from the argument.
+		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+		if test "X$xdir" = "X$arg"; then
+		  xdir=
+		else
+		  xdir="$xdir/"
+		fi
+
+		if test "$pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object="$xdir$pic_object"
+
+		  if test "$prev" = dlfiles; then
+		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		      dlfiles="$dlfiles $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test "$prev" = dlprefiles; then
+		    # Preload the old-style object.
+		    dlprefiles="$dlprefiles $pic_object"
+		    prev=
+		  fi
+
+		  # A PIC object.
+		  libobjs="$libobjs $pic_object"
+		  arg="$pic_object"
+		fi
+
+		# Non-PIC object.
+		if test "$non_pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object="$xdir$non_pic_object"
+
+		  # A standard non-PIC object
+		  non_pic_objects="$non_pic_objects $non_pic_object"
+		  if test -z "$pic_object" || test "$pic_object" = none ; then
+		    arg="$non_pic_object"
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object="$pic_object"
+		  non_pic_objects="$non_pic_objects $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if test -z "$run"; then
+		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+		  exit $EXIT_FAILURE
+		else
+		  # Dry-run case.
+
+		  # Extract subdirectory from the argument.
+		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+		  if test "X$xdir" = "X$arg"; then
+		    xdir=
+		  else
+		    xdir="$xdir/"
+		  fi
+
+		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+		  libobjs="$libobjs $pic_object"
+		  non_pic_objects="$non_pic_objects $non_pic_object"
+		fi
+	      fi
+	    done
+	  else
+	    $echo "$modename: link input file \`$save_arg' does not exist"
+	    exit $EXIT_FAILURE
+	  fi
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    $echo "$modename: only absolute run-paths are allowed" 1>&2
+	    exit $EXIT_FAILURE
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) rpath="$rpath $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) xrpath="$xrpath $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	xcompiler)
+	  compiler_flags="$compiler_flags $qarg"
+	  prev=
+	  compile_command="$compile_command $qarg"
+	  finalize_command="$finalize_command $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $wl$qarg"
+	  prev=
+	  compile_command="$compile_command $wl$qarg"
+	  finalize_command="$finalize_command $wl$qarg"
+	  continue
+	  ;;
+	xcclinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $qarg"
+	  prev=
+	  compile_command="$compile_command $qarg"
+	  finalize_command="$finalize_command $qarg"
+	  continue
+	  ;;
+	shrext)
+  	  shrext_cmds="$arg"
+	  prev=
+	  continue
+	  ;;
+	darwin_framework|darwin_framework_skip)
+	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
+	  compile_command="$compile_command $arg"
+	  finalize_command="$finalize_command $arg"
+	  prev=
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi # test -n "$prev"
+
+      prevarg="$arg"
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  compile_command="$compile_command $link_static_flag"
+	  finalize_command="$finalize_command $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+	continue
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  $echo "$modename: more than one -exported-symbols argument is not allowed"
+	  exit $EXIT_FAILURE
+	fi
+	if test "X$arg" = "X-export-symbols"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -framework|-arch|-isysroot)
+	case " $CC " in
+	  *" ${arg} ${1} "* | *" ${arg}	${1} "*) 
+		prev=darwin_framework_skip ;;
+	  *) compiler_flags="$compiler_flags $arg"
+	     prev=darwin_framework ;;
+	esac
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+	continue
+	;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | /*-*-irix*)
+	  compile_command="$compile_command $arg"
+	  finalize_command="$finalize_command $arg"
+	  ;;
+	esac
+	continue
+	;;
+
+      -L*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  if test -z "$absdir"; then
+	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+	    absdir="$dir"
+	    notinst_path="$notinst_path $dir"
+	  fi
+	  dir="$absdir"
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "*) ;;
+	*)
+	  deplibs="$deplibs -L$dir"
+	  lib_search_path="$lib_search_path $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$dir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    deplibs="$deplibs -framework System"
+	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  esac
+	elif test "X$arg" = "X-lc_r"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
+	fi
+	deplibs="$deplibs $arg"
+	continue
+	;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      -model)
+	compile_command="$compile_command $arg"
+	compiler_flags="$compiler_flags $arg"
+	finalize_command="$finalize_command $arg"
+	prev=xcompiler
+	continue
+	;;
+
+     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+	compiler_flags="$compiler_flags $arg"
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m* pass through architecture-specific compiler args for GCC
+      # -m*, -t[45]*, -txscale* pass through architecture-specific
+      # compiler args for GCC
+      # -pg pass through profiling flag for GCC
+      # @file GCC response files
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
+      -t[45]*|-txscale*|@*)
+
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+        compile_command="$compile_command $arg"
+        finalize_command="$finalize_command $arg"
+        compiler_flags="$compiler_flags $arg"
+        continue
+        ;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # in order for the loader to find any dlls it needs.
+	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  $echo "$modename: only absolute run-paths are allowed" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) xrpath="$xrpath $dir" ;;
+	esac
+	continue
+	;;
+
+      -static)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
+
+      -Wc,*)
+	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+	  case $flag in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    flag="\"$flag\""
+	    ;;
+	  esac
+	  arg="$arg $wl$flag"
+	  compiler_flags="$compiler_flags $flag"
+	done
+	IFS="$save_ifs"
+	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	;;
+
+      -Wl,*)
+	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+	  case $flag in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    flag="\"$flag\""
+	    ;;
+	  esac
+	  arg="$arg $wl$flag"
+	  compiler_flags="$compiler_flags $wl$flag"
+	  linker_flags="$linker_flags $flag"
+	done
+	IFS="$save_ifs"
+	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
+
+      # Some other compiler flag.
+      -* | +*)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+
+      *.$objext)
+	# A standard object.
+	objs="$objs $arg"
+	;;
+
+      *.lo)
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  pic_object=
+	  non_pic_object=
+
+	  # Read the .lo file
+	  # If there is no directory component, then add one.
+	  case $arg in
+	  */* | *\\*) . $arg ;;
+	  *) . ./$arg ;;
+	  esac
+
+	  if test -z "$pic_object" || \
+	     test -z "$non_pic_object" ||
+	     test "$pic_object" = none && \
+	     test "$non_pic_object" = none; then
+	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+
+	  # Extract subdirectory from the argument.
+	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	  if test "X$xdir" = "X$arg"; then
+	    xdir=
+ 	  else
+	    xdir="$xdir/"
+	  fi
+
+	  if test "$pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    pic_object="$xdir$pic_object"
+
+	    if test "$prev" = dlfiles; then
+	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		dlfiles="$dlfiles $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test "$prev" = dlprefiles; then
+	      # Preload the old-style object.
+	      dlprefiles="$dlprefiles $pic_object"
+	      prev=
+	    fi
+
+	    # A PIC object.
+	    libobjs="$libobjs $pic_object"
+	    arg="$pic_object"
+	  fi
+
+	  # Non-PIC object.
+	  if test "$non_pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object="$xdir$non_pic_object"
+
+	    # A standard non-PIC object
+	    non_pic_objects="$non_pic_objects $non_pic_object"
+	    if test -z "$pic_object" || test "$pic_object" = none ; then
+	      arg="$non_pic_object"
+	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object="$pic_object"
+	    non_pic_objects="$non_pic_objects $non_pic_object"
+	  fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if test -z "$run"; then
+	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+	    exit $EXIT_FAILURE
+	  else
+	    # Dry-run case.
+
+	    # Extract subdirectory from the argument.
+	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	    if test "X$xdir" = "X$arg"; then
+	      xdir=
+	    else
+	      xdir="$xdir/"
+	    fi
+
+	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+	    libobjs="$libobjs $pic_object"
+	    non_pic_objects="$non_pic_objects $non_pic_object"
+	  fi
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	deplibs="$deplibs $arg"
+	old_deplibs="$old_deplibs $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	if test "$prev" = dlfiles; then
+	  # This library was specified with -dlopen.
+	  dlfiles="$dlfiles $arg"
+	  prev=
+	elif test "$prev" = dlprefiles; then
+	  # The library was specified with -dlpreopen.
+	  dlprefiles="$dlprefiles $arg"
+	  prev=
+	else
+	  deplibs="$deplibs $arg"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+      fi
+    done # argument parsing loop
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      compile_command="$compile_command $arg"
+      finalize_command="$finalize_command $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    libobjs_save="$libobjs"
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$output_objdir" = "X$output"; then
+      output_objdir="$objdir"
+    else
+      output_objdir="$output_objdir/$objdir"
+    fi
+    # Create the object directory.
+    if test ! -d "$output_objdir"; then
+      $show "$mkdir $output_objdir"
+      $run $mkdir $output_objdir
+      exit_status=$?
+      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
+	exit $exit_status
+      fi
+    fi
+
+    # Determine the type of output
+    case $output in
+    "")
+      $echo "$modename: you must specify an output file" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    case $host in
+    *cygwin* | *mingw* | *pw32*)
+      # don't eliminate duplications in $postdeps and $predeps
+      duplicate_compiler_generated_deps=yes
+      ;;
+    *)
+      duplicate_compiler_generated_deps=$duplicate_deps
+      ;;
+    esac
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if test "X$duplicate_deps" = "Xyes" ; then
+	case "$libs " in
+	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	esac
+      fi
+      libs="$libs $deplib"
+    done
+
+    if test "$linkmode" = lib; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+	  esac
+	  pre_post_deps="$pre_post_deps $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    case $linkmode in
+    lib)
+	passes="conv link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+	    exit $EXIT_FAILURE
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=no
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+    for pass in $passes; do
+      if test "$linkmode,$pass" = "lib,link" ||
+	 test "$linkmode,$pass" = "prog,scan"; then
+	libs="$deplibs"
+	deplibs=
+      fi
+      if test "$linkmode" = prog; then
+	case $pass in
+	dlopen) libs="$dlfiles" ;;
+	dlpreopen) libs="$dlprefiles" ;;
+	link)
+	  libs="$deplibs %DEPLIBS%"
+	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
+	  ;;
+	esac
+      fi
+      if test "$pass" = dlopen; then
+	# Collect dlpreopened libraries
+	save_deplibs="$deplibs"
+	deplibs=
+      fi
+      for deplib in $libs; do
+	lib=
+	found=no
+	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    compiler_flags="$compiler_flags $deplib"
+	  fi
+	  continue
+	  ;;
+	-l*)
+	  if test "$linkmode" != lib && test "$linkmode" != prog; then
+	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+	    continue
+	  fi
+	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib="$searchdir/lib${name}${search_ext}"
+	      if test -f "$lib"; then
+		if test "$search_ext" = ".la"; then
+		  found=yes
+		else
+		  found=no
+		fi
+		break 2
+	      fi
+	    done
+	  done
+	  if test "$found" != yes; then
+	    # deplib doesn't seem to be a libtool library
+	    if test "$linkmode,$pass" = "prog,link"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  else # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if (${SED} -e '2q' $lib |
+                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+		  library_names=
+		  old_library=
+		  case $lib in
+		  */* | *\\*) . $lib ;;
+		  *) . ./$lib ;;
+		  esac
+		  for l in $old_library $library_names; do
+		    ll="$l"
+		  done
+		  if test "X$ll" = "X$old_library" ; then # only static version available
+		    found=no
+		    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+		    test "X$ladir" = "X$lib" && ladir="."
+		    lib=$ladir/$old_library
+		    if test "$linkmode,$pass" = "prog,link"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+	        ;;
+	      *) ;;
+	      esac
+	    fi
+	  fi
+	  ;; # -l
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test "$pass" = conv && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    ;;
+	  prog)
+	    if test "$pass" = conv; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test "$pass" = scan; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    ;;
+	  *)
+	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test "$pass" = link; then
+	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) xrpath="$xrpath $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la) lib="$deplib" ;;
+	*.$libext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    valid_a_lib=no
+	    case $deplibs_check_method in
+	      match_pattern*)
+		set dummy $deplibs_check_method
+	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+		if eval $echo \"$deplib\" 2>/dev/null \
+		    | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		  valid_a_lib=yes
+		fi
+		;;
+	      pass_all)
+		valid_a_lib=yes
+		;;
+            esac
+	    if test "$valid_a_lib" != yes; then
+	      $echo
+	      $echo "*** Warning: Trying to link with static lib archive $deplib."
+	      $echo "*** I have the capability to make that library automatically link in when"
+	      $echo "*** you link to this library.  But I can only do this if you have a"
+	      $echo "*** shared version of the library, which you do not appear to have"
+	      $echo "*** because the file extensions .$libext of this argument makes me believe"
+	      $echo "*** that it is just a static archive that I should not used here."
+	    else
+	      $echo
+	      $echo "*** Warning: Linking the shared library $output against the"
+	      $echo "*** static library $deplib is not portable!"
+	      deplibs="$deplib $deplibs"
+	    fi
+	    continue
+	    ;;
+	  prog)
+	    if test "$pass" != link; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	  elif test "$linkmode" = prog; then
+	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      newdlprefiles="$newdlprefiles $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      newdlfiles="$newdlfiles $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=yes
+	  continue
+	  ;;
+	esac # case $deplib
+	if test "$found" = yes || test -f "$lib"; then :
+	else
+	  $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	# Check to see that this really is a libtool archive.
+	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$ladir" = "X$lib" && ladir="."
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variables installed, or shouldnotlink
+	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
+
+	# Read the .la file
+	case $lib in
+	*/* | *\\*) . $lib ;;
+	*) . ./$lib ;;
+	esac
+
+	if test "$linkmode,$pass" = "lib,link" ||
+	   test "$linkmode,$pass" = "prog,scan" ||
+	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+	fi
+
+	if test "$pass" = conv; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+	      exit $EXIT_FAILURE
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    convenience="$convenience $ladir/$objdir/$old_library"
+	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
+	    tmp_libs=
+	    for deplib in $dependency_libs; do
+	      deplibs="$deplib $deplibs"
+              if test "X$duplicate_deps" = "Xyes" ; then
+	        case "$tmp_libs " in
+	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	        esac
+              fi
+	      tmp_libs="$tmp_libs $deplib"
+	    done
+	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
+	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  continue
+	fi # $pass = conv
+
+
+	# Get the name of the library we link against.
+	linklib=
+	for l in $old_library $library_names; do
+	  linklib="$l"
+	done
+	if test -z "$linklib"; then
+	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	# This library was specified with -dlopen.
+	if test "$pass" = dlopen; then
+	  if test -z "$libdir"; then
+	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  if test -z "$dlname" ||
+	     test "$dlopen_support" != yes ||
+	     test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    dlprefiles="$dlprefiles $lib $dependency_libs"
+	  else
+	    newdlfiles="$newdlfiles $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	    abs_ladir="$ladir"
+	  fi
+	  ;;
+	esac
+	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+
+	# Find the relevant object directory and library name.
+	if test "X$installed" = Xyes; then
+	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    libdir="$abs_ladir"
+	  else
+	    dir="$libdir"
+	    absdir="$libdir"
+	  fi
+	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+	else
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  else
+	    dir="$ladir/$objdir"
+	    absdir="$abs_ladir/$objdir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  fi
+	fi # $installed = yes
+	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+
+	# This library was specified with -dlpreopen.
+	if test "$pass" = dlpreopen; then
+	  if test -z "$libdir"; then
+	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  # Prefer using a static library (so that no silly _DYNAMIC symbols
+	  # are required to link).
+	  if test -n "$old_library"; then
+	    newdlprefiles="$newdlprefiles $dir/$old_library"
+	  # Otherwise, use the dlname, so that lt_dlopen finds it.
+	  elif test -n "$dlname"; then
+	    newdlprefiles="$newdlprefiles $dir/$dlname"
+	  else
+	    newdlprefiles="$newdlprefiles $dir/$linklib"
+	  fi
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test "$linkmode" = lib; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
+	fi
+
+
+	if test "$linkmode" = prog && test "$pass" != link; then
+	  newlib_search_path="$newlib_search_path $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=no
+	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+	     test "$build_libtool_libs" = no; then
+	    linkalldeplibs=yes
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+	    esac
+	    # Need to link against all dependency_libs?
+	    if test "$linkalldeplibs" = yes; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if test "X$duplicate_deps" = "Xyes" ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	if test "$linkmode,$pass" = "prog,link"; then
+	  if test -n "$library_names" &&
+	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+	      # Make sure the rpath contains only unique directories.
+	      case "$temp_rpath " in
+	      *" $dir "*) ;;
+	      *" $absdir "*) ;;
+	      *) temp_rpath="$temp_rpath $absdir" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) compile_rpath="$compile_rpath $absdir"
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) finalize_rpath="$finalize_rpath $libdir"
+	      esac
+	      ;;
+	    esac
+	  fi # $linkmode,$pass = prog,link...
+
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+	fi
+
+	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test "$use_static_libs" = built && test "$installed" = yes ; then
+	  use_static_libs=no
+	fi
+	if test -n "$library_names" &&
+	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+	  if test "$installed" = no; then
+	    notinst_deplibs="$notinst_deplibs $lib"
+	    need_relink=yes
+	  fi
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on
+	  # some systems (darwin)
+	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
+	    $echo
+	    if test "$linkmode" = prog; then
+	      $echo "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $echo "*** Warning: Linking the shared library $output against the loadable module"
+	    fi
+	    $echo "*** $linklib is not portable!"
+	  fi
+	  if test "$linkmode" = lib &&
+	     test "$hardcode_into_libs" = yes; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) compile_rpath="$compile_rpath $absdir"
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) finalize_rpath="$finalize_rpath $libdir"
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    realname="$2"
+	    shift; shift
+	    libname=`eval \\$echo \"$libname_spec\"`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname="$dlname"
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin* | mingw*)
+		major=`expr $current - $age`
+		versuffix="-$major"
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname="$realname"
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot="$soname"
+	    soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
+	    newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      $show "extracting exported symbol list from \`$soname'"
+	      save_ifs="$IFS"; IFS='~'
+	      cmds=$extract_expsyms_cmds
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
+		$show "$cmd"
+		$run eval "$cmd" || exit $?
+	      done
+	      IFS="$save_ifs"
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      $show "generating import library for \`$soname'"
+	      save_ifs="$IFS"; IFS='~'
+	      cmds=$old_archive_from_expsyms_cmds
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
+		$show "$cmd"
+		$run eval "$cmd" || exit $?
+	      done
+	      IFS="$save_ifs"
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n "$old_archive_from_expsyms_cmds"
+
+	  if test "$linkmode" = prog || test "$mode" != relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test "$hardcode_direct" = no; then
+		add="$dir/$linklib"
+		case $host in
+		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir="-L$dir" ;;
+		  *-*-darwin* )
+		    # if the lib is a module then we can not link against
+		    # it, someone is ignoring the new warnings I added
+		    if /usr/bin/file -L $add 2> /dev/null |
+                      $EGREP ": [^:]* bundle" >/dev/null ; then
+		      $echo "** Warning, lib $linklib is a module, not a shared library"
+		      if test -z "$old_library" ; then
+		        $echo
+		        $echo "** And there doesn't seem to be a static archive available"
+		        $echo "** The link will probably fail, sorry"
+		      else
+		        add="$dir/$old_library"
+		      fi
+		    fi
+		esac
+	      elif test "$hardcode_minus_L" = no; then
+		case $host in
+		*-*-sunos*) add_shlibpath="$dir" ;;
+		esac
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = no; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test "$hardcode_direct" = yes; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = yes; then
+		add_dir="-L$dir"
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case $libdir in
+		    [\\/]*)
+		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = yes; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test "$lib_linked" != yes; then
+	      $echo "$modename: configuration error: unsupported hardcode properties"
+	      exit $EXIT_FAILURE
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test "$hardcode_direct" != yes && \
+		 test "$hardcode_minus_L" != yes && \
+		 test "$hardcode_shlibpath_var" = yes; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test "$linkmode" = prog || test "$mode" = relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test "$hardcode_direct" = yes; then
+	      add="$libdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      add_dir="-L$libdir"
+	      add="-l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+	      esac
+	      add="-l$name"
+	    elif test "$hardcode_automatic" = yes; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
+	        add="$inst_prefix_dir$libdir/$linklib"
+	      else
+	        add="$libdir/$linklib"
+	      fi
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir="-L$libdir"
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case $libdir in
+		  [\\/]*)
+		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
+	      add="-l$name"
+	    fi
+
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test "$linkmode" = prog; then
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test "$build_libtool_libs" = yes; then
+	  # Not a shared library
+	  if test "$deplibs_check_method" != pass_all; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    $echo
+	    $echo "*** Warning: This system can not link to static lib archive $lib."
+	    $echo "*** I have the capability to make that library automatically link in when"
+	    $echo "*** you link to this library.  But I can only do this if you have a"
+	    $echo "*** shared version of the library, which you do not appear to have."
+	    if test "$module" = yes; then
+	      $echo "*** But as you try to build a module library, libtool will still create "
+	      $echo "*** a static module, that should work as long as the dlopening application"
+	      $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		$echo
+		$echo "*** However, this would only work if libtool was able to extract symbol"
+		$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		$echo "*** not find such a program.  So, this module is probably useless."
+		$echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test "$build_old_libs" = no; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test "$linkmode" = lib; then
+	  if test -n "$dependency_libs" &&
+	     { test "$hardcode_into_libs" != yes ||
+	       test "$build_old_libs" = yes ||
+	       test "$link_static" = yes; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) xrpath="$xrpath $temp_xrpath";;
+		   esac;;
+	      *) temp_deplibs="$temp_deplibs $libdir";;
+	      esac
+	    done
+	    dependency_libs="$temp_deplibs"
+	  fi
+
+	  newlib_search_path="$newlib_search_path $absdir"
+	  # Link against this library
+	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    if test "X$duplicate_deps" = "Xyes" ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done
+
+	  if test "$link_all_deplibs" != no; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      -L*) path="$deplib" ;;
+	      *.la)
+		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+		test "X$dir" = "X$deplib" && dir="."
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+		    absdir="$dir"
+		  fi
+		  ;;
+		esac
+		if grep "^installed=no" $deplib > /dev/null; then
+		  path="$absdir/$objdir"
+		else
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  if test -z "$libdir"; then
+		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+		    exit $EXIT_FAILURE
+		  fi
+		  if test "$absdir" != "$libdir"; then
+		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+		  fi
+		  path="$absdir"
+		fi
+		depdepl=
+		case $host in
+		*-*-darwin*)
+		  # we do not want to link against static libs,
+		  # but need to link against shared
+		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names" ; then
+		    for tmp in $deplibrary_names ; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$path/$depdepl" ; then
+		      depdepl="$path/$depdepl"
+		    fi
+		    # do not add paths which are already there
+		    case " $newlib_search_path " in
+		    *" $path "*) ;;
+		    *) newlib_search_path="$newlib_search_path $path";;
+		    esac
+		  fi
+		  path=""
+		  ;;
+		*)
+		  path="-L$path"
+		  ;;
+		esac
+		;;
+	      -l*)
+		case $host in
+		*-*-darwin*)
+		  # Again, we only want to link against shared libraries
+		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
+		  for tmp in $newlib_search_path ; do
+		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
+		      eval depdepl="$tmp/lib$tmp_libs.dylib"
+		      break
+		    fi
+		  done
+		  path=""
+		  ;;
+		*) continue ;;
+		esac
+		;;
+	      *) continue ;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	      case " $deplibs " in
+	      *" $depdepl "*) ;;
+	      *) deplibs="$depdepl $deplibs" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      dependency_libs="$newdependency_libs"
+      if test "$pass" = dlpreopen; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test "$pass" != dlopen; then
+	if test "$pass" != conv; then
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) lib_search_path="$lib_search_path $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	fi
+
+	if test "$linkmode,$pass" != "prog,link"; then
+	  vars="deplibs"
+	else
+	  vars="compile_deplibs finalize_deplibs"
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
+	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) tmp_libs="$tmp_libs $deplib" ;;
+	      esac
+	      ;;
+	    *) tmp_libs="$tmp_libs $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs ; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=""
+	  ;;
+	esac
+	if test -n "$i" ; then
+	  tmp_libs="$tmp_libs $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test "$linkmode" = prog; then
+      dlfiles="$newdlfiles"
+      dlprefiles="$newdlprefiles"
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$deplibs"; then
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+      fi
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      objs="$objs$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case $outputname in
+      lib*)
+	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	eval shared_ext=\"$shrext_cmds\"
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	if test "$module" = no; then
+	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+	if test "$need_lib_prefix" != no; then
+	  # Add the "lib" prefix for modules if required
+	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  eval shared_ext=\"$shrext_cmds\"
+	  eval libname=\"$libname_spec\"
+	else
+	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test "$deplibs_check_method" != pass_all; then
+	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+	  exit $EXIT_FAILURE
+	else
+	  $echo
+	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
+	  $echo "*** objects $objs is not portable!"
+	  libobjs="$libobjs $objs"
+	fi
+      fi
+
+      if test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+      fi
+
+      set dummy $rpath
+      if test "$#" -gt 2; then
+	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+      fi
+      install_libdir="$2"
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test "$build_libtool_libs" = yes; then
+	  # Building a libtool convenience library.
+	  # Some compilers have problems with a `.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	if test -n "$vinfo"; then
+	  $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
+	fi
+
+	if test -n "$release"; then
+	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+	fi
+      else
+
+	# Parse the version information argument.
+	save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	IFS="$save_ifs"
+
+	if test -n "$8"; then
+	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major="$2"
+	  number_minor="$3"
+	  number_revision="$4"
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # which has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  darwin|linux|osf|windows)
+	    current=`expr $number_major + $number_minor`
+	    age="$number_minor"
+	    revision="$number_revision"
+	    ;;
+	  freebsd-aout|freebsd-elf|sunos)
+	    current="$number_major"
+	    revision="$number_minor"
+	    age="0"
+	    ;;
+	  irix|nonstopux)
+	    current=`expr $number_major + $number_minor - 1`
+	    age="$number_minor"
+	    revision="$number_minor"
+	    ;;
+	  *)
+	    $echo "$modename: unknown library version type \`$version_type'" 1>&2
+	    $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+	    exit $EXIT_FAILURE
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current="$2"
+	  revision="$3"
+	  age="$4"
+	  ;;
+	esac
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+
+	case $revision in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+
+	case $age in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+
+	if test "$age" -gt "$current"; then
+	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  # Darwin ld doesn't like 0 for these options...
+	  minor_current=`expr $current + 1`
+	  verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current";
+	  ;;
+
+	irix | nonstopux)
+	  major=`expr $current - $age + 1`
+
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring="$verstring_prefix$major.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test "$loop" -ne 0; do
+	    iface=`expr $revision - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="$verstring_prefix$major.$iface:$verstring"
+	  done
+
+	  # Before this point, $major must not contain `.'.
+	  major=.$major
+	  versuffix="$major.$revision"
+	  ;;
+
+	linux)
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  major=.`expr $current - $age`
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test "$loop" -ne 0; do
+	    iface=`expr $current - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  verstring="$verstring:${current}.0"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 filesystems.
+	  major=`expr $current - $age`
+	  versuffix="-$major"
+	  ;;
+
+	*)
+	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
+	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=
+	    ;;
+	  *)
+	    verstring="0.0"
+	    ;;
+	  esac
+	  if test "$need_version" = no; then
+	    versuffix=
+	  else
+	    versuffix=".0.0"
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test "$avoid_version" = yes && test "$need_version" = no; then
+	  major=
+	  versuffix=
+	  verstring=""
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+      fi
+
+      if test "$mode" != relink; then
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$echo "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+	       if test "X$precious_files_regex" != "X"; then
+	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+	         then
+		   continue
+		 fi
+	       fi
+	       removelist="$removelist $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	if test -n "$removelist"; then
+	  $show "${rm}r $removelist"
+	  $run ${rm}r $removelist
+	fi
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+	oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      for path in $notinst_path; do
+	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+      done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  temp_xrpath="$temp_xrpath -R$libdir"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles="$dlfiles"
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) dlfiles="$dlfiles $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles="$dlprefiles"
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) dlprefiles="$dlprefiles $lib" ;;
+	esac
+      done
+
+      if test "$build_libtool_libs" = yes; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    deplibs="$deplibs -framework System"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    ;;
+ 	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test "$build_libtool_need_lc" = "yes"; then
+	      deplibs="$deplibs -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=""
+	versuffix=""
+	major=""
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behavior.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $rm conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $rm conftest
+	  $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
+	  if test "$?" -eq 0 ; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      name=`expr $i : '-l\(.*\)'`
+	      # If $name is empty we are operating on a -L argument.
+              if test "$name" != "" && test "$name" -ne "0"; then
+		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    newdeplibs="$newdeplibs $i"
+		    i=""
+		    ;;
+		  esac
+	        fi
+		if test -n "$i" ; then
+		  libname=`eval \\$echo \"$libname_spec\"`
+		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		  set dummy $deplib_matches
+		  deplib_match=$2
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    newdeplibs="$newdeplibs $i"
+		  else
+		    droppeddeps=yes
+		    $echo
+		    $echo "*** Warning: dynamic linker does not accept needed library $i."
+		    $echo "*** I have the capability to make that library automatically link in when"
+		    $echo "*** you link to this library.  But I can only do this if you have a"
+		    $echo "*** shared version of the library, which I believe you do not have"
+		    $echo "*** because a test_compile did reveal that the linker did not use it for"
+		    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  else
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
+	    for i in $deplibs; do
+	      name=`expr $i : '-l\(.*\)'`
+	      # If $name is empty we are operating on a -L argument.
+              if test "$name" != "" && test "$name" != "0"; then
+		$rm conftest
+		$LTCC $LTCFLAGS -o conftest conftest.c $i
+		# Did it work?
+		if test "$?" -eq 0 ; then
+		  ldd_output=`ldd conftest`
+		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      newdeplibs="$newdeplibs $i"
+		      i=""
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i" ; then
+		    libname=`eval \\$echo \"$libname_spec\"`
+		    deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		    set dummy $deplib_matches
+		    deplib_match=$2
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		      newdeplibs="$newdeplibs $i"
+		    else
+		      droppeddeps=yes
+		      $echo
+		      $echo "*** Warning: dynamic linker does not accept needed library $i."
+		      $echo "*** I have the capability to make that library automatically link in when"
+		      $echo "*** you link to this library.  But I can only do this if you have a"
+		      $echo "*** shared version of the library, which you do not appear to have"
+		      $echo "*** because a test_compile did reveal that the linker did not use this one"
+		      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
+		  fi
+		else
+		  droppeddeps=yes
+		  $echo
+		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
+		  $echo "***  make it link in!  You will probably need to install it or some"
+		  $echo "*** library that it depends on before this library will be fully"
+		  $echo "*** functional.  Installing it before continuing would be even better."
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method
+	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    name=`expr $a_deplib : '-l\(.*\)'`
+	    # If $name is empty we are operating on a -L argument.
+            if test "$name" != "" && test  "$name" != "0"; then
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  newdeplibs="$newdeplibs $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval \\$echo \"$libname_spec\"`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null \
+			 | grep " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib="$potent_lib"
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+			 | ${SED} 10q \
+			 | $EGREP "$file_magic_regex" > /dev/null; then
+			newdeplibs="$newdeplibs $a_deplib"
+			a_deplib=""
+			break 2
+		      fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		$echo
+		$echo "*** Warning: linker path does not have real file for library $a_deplib."
+		$echo "*** I have the capability to make that library automatically link in when"
+		$echo "*** you link to this library.  But I can only do this if you have a"
+		$echo "*** shared version of the library, which you do not appear to have"
+		$echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $echo "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $echo "*** with $libname and none of the candidates passed a file format test"
+		  $echo "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	    else
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	    fi
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    name=`expr $a_deplib : '-l\(.*\)'`
+	    # If $name is empty we are operating on a -L argument.
+	    if test -n "$name" && test "$name" != "0"; then
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  newdeplibs="$newdeplibs $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval \\$echo \"$libname_spec\"`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib="$potent_lib" # see symlink-check above in file_magic test
+		    if eval $echo \"$potent_lib\" 2>/dev/null \
+		        | ${SED} 10q \
+		        | $EGREP "$match_pattern_regex" > /dev/null; then
+		      newdeplibs="$newdeplibs $a_deplib"
+		      a_deplib=""
+		      break 2
+		    fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		$echo
+		$echo "*** Warning: linker path does not have real file for library $a_deplib."
+		$echo "*** I have the capability to make that library automatically link in when"
+		$echo "*** you link to this library.  But I can only do this if you have a"
+		$echo "*** shared version of the library, which you do not appear to have"
+		$echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $echo "*** with $libname and none of the candidates passed a file format test"
+		  $echo "*** using a regex pattern. Last file checked: $potlib"
+		fi
+	      fi
+	    else
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	    fi
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=""
+	  tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+	    -e 's/ -[LR][^ ]*//g'`
+	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	    for i in $predeps $postdeps ; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
+	    done
+	  fi
+	  if $echo "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' \
+	    | grep . >/dev/null; then
+	    $echo
+	    if test "X$deplibs_check_method" = "Xnone"; then
+	      $echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      $echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    $echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	  fi
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library is the System framework
+	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	  ;;
+	esac
+
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
+	    $echo
+	    $echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $echo "*** dependencies of module $libname.  Therefore, libtool will create"
+	    $echo "*** a static module, that should work as long as the dlopening"
+	    $echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      $echo
+	      $echo "*** However, this would only work if libtool was able to extract symbol"
+	      $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      $echo "*** not find such a program.  So, this module is probably useless."
+	      $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    $echo "*** The inter-library dependencies that have been dropped here will be"
+	    $echo "*** automatically added whenever a program is linked with this library"
+	    $echo "*** or is declared to -dlopen it."
+
+	    if test "$allow_undefined" = no; then
+	      $echo
+	      $echo "*** Since this library must not contain undefined symbols,"
+	      $echo "*** because either the platform does not support them or"
+	      $echo "*** it was explicitly requested with -no-undefined,"
+	      $echo "*** libtool will only create a static version of it."
+	      if test "$build_old_libs" = no; then
+		oldlibs="$output_objdir/$libname.$libext"
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    new_libs="$new_libs -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) new_libs="$new_libs $deplib" ;;
+	  esac
+	  ;;
+	*) new_libs="$new_libs $deplib" ;;
+	esac
+      done
+      deplibs="$new_libs"
+
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+	if test "$hardcode_into_libs" = yes; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath="$finalize_rpath"
+	  test "$mode" != relink && rpath="$compile_rpath$rpath"
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs="$libdir"
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		dep_rpath="$dep_rpath $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) perm_rpath="$perm_rpath $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir="$hardcode_libdirs"
+	    if test -n "$hardcode_libdir_flag_spec_ld"; then
+	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+	    else
+	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+	    fi
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      rpath="$rpath$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath="$finalize_shlibpath"
+	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	realname="$2"
+	shift; shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
+
+	lib="$output_objdir/$realname"
+	linknames=
+	for link
+	do
+	  linknames="$linknames $link"
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    $show "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $run $rm $export_symbols
+	    cmds=$export_symbols_cmds
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      eval cmd=\"$cmd\"
+	      if len=`expr "X$cmd" : ".*"` &&
+	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	        $show "$cmd"
+	        $run eval "$cmd" || exit $?
+	        skipped_export=false
+	      else
+	        # The command line is too long to execute in one step.
+	        $show "using reloadable object file for export list..."
+	        skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
+	      fi
+	    done
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex"; then
+	      $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+	      $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+	fi
+
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+		case " $convenience " in
+		*" $test_deplib "*) ;;
+		*)
+			tmp_deplibs="$tmp_deplibs $test_deplib"
+			;;
+		esac
+	done
+	deplibs="$tmp_deplibs"
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  else
+	    gentop="$output_objdir/${outputname}x"
+	    generated="$generated $gentop"
+
+	    func_extract_archives $gentop $convenience
+	    libobjs="$libobjs $func_extract_archives_result"
+	  fi
+	fi
+	
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  linker_flags="$linker_flags $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test "$mode" = relink; then
+	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test "$module" = yes && test -n "$module_cmds" ; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
+	else
+	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	  eval test_cmds=\"$archive_expsym_cmds\"
+	  cmds=$archive_expsym_cmds
+	else
+	  eval test_cmds=\"$archive_cmds\"
+	  cmds=$archive_cmds
+	  fi
+	fi
+
+	if test "X$skipped_export" != "X:" &&
+	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
+	else
+	  # The command line is too long to link in one step, link piecewise.
+	  $echo "creating reloadable object files..."
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  delfiles=
+	  last_robj=
+	  k=1
+	  output=$output_objdir/$output_la-${k}.$objext
+	  # Loop over the list of objects to be linked.
+	  for obj in $save_libobjs
+	  do
+	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+	    if test "X$objlist" = X ||
+	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+		 test "$len" -le "$max_cmd_len"; }; then
+	      objlist="$objlist $obj"
+	    else
+	      # The command $test_cmds is almost too long, add a
+	      # command to the queue.
+	      if test "$k" -eq 1 ; then
+		# The first file doesn't have a previous command to add.
+		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+	      else
+		# All subsequent reloadable object files will link in
+		# the last one created.
+		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+	      fi
+	      last_robj=$output_objdir/$output_la-${k}.$objext
+	      k=`expr $k + 1`
+	      output=$output_objdir/$output_la-${k}.$objext
+	      objlist=$obj
+	      len=1
+	    fi
+	  done
+	  # Handle the remaining objects by creating one last
+	  # reloadable object file.  All subsequent reloadable object
+	  # files will link in the last one created.
+	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+
+	  if ${skipped_export-false}; then
+	    $show "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $run $rm $export_symbols
+	    libobjs=$output
+	    # Append the command to create the export file.
+	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
+          fi
+
+	  # Set up a command to remove the reloadable object files
+	  # after they are used.
+	  i=0
+	  while test "$i" -lt "$k"
+	  do
+	    i=`expr $i + 1`
+	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
+	  done
+
+	  $echo "creating a temporary reloadable object file: $output"
+
+	  # Loop through the commands generated above and execute them.
+	  save_ifs="$IFS"; IFS='~'
+	  for cmd in $concat_cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || exit $?
+	  done
+	  IFS="$save_ifs"
+
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+	  if test "$module" = yes && test -n "$module_cmds" ; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
+	  else
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    cmds=$archive_expsym_cmds
+	  else
+	    cmds=$archive_cmds
+	    fi
+	  fi
+
+	  # Append the command to remove the reloadable object files
+	  # to the just-reset $cmds.
+	  eval cmds=\"\$cmds~\$rm $delfiles\"
+	fi
+	save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
+	  $show "$cmd"
+	  $run eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test "$mode" = relink; then
+	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	    fi
+
+	    exit $lt_exit
+	  }
+	done
+	IFS="$save_ifs"
+
+	# Restore the uninstalled library and exit
+	if test "$mode" = relink; then
+	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      $show "${rm}r $gentop"
+	      $run ${rm}r "$gentop"
+	    fi
+	  fi
+
+	  exit $EXIT_SUCCESS
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test "$module" = yes || test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$deplibs"; then
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+      fi
+
+      case $output in
+      *.lo)
+	if test -n "$objs$old_deplibs"; then
+	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+	libobj="$output"
+	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+	;;
+      *)
+	libobj=
+	obj="$output"
+	;;
+      esac
+
+      # Delete the old objects.
+      $run $rm $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec
+      wl=
+
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+	else
+	  gentop="$output_objdir/${obj}x"
+	  generated="$generated $gentop"
+
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+	fi
+      fi
+
+      # Create the old-style object.
+      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+      output="$obj"
+      cmds=$reload_cmds
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	eval cmd=\"$cmd\"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	# $show "echo timestamp > $libobj"
+	# $run eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
+      fi
+
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output="$libobj"
+	cmds=$reload_cmds
+	save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
+	  $show "$cmd"
+	  $run eval "$cmd" || exit $?
+	done
+	IFS="$save_ifs"
+      fi
+
+      if test -n "$gentop"; then
+	$show "${rm}r $gentop"
+	$run ${rm}r $gentop
+      fi
+
+      exit $EXIT_SUCCESS
+      ;;
+
+    prog)
+      case $host in
+	*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+      esac
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+      fi
+
+      if test "$preload" = yes; then
+	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
+	   test "$dlopen_self_static" = unknown; then
+	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+	fi
+      fi
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	;;
+      esac
+
+      case $host in
+      *darwin*)
+        # Don't allow lazy linking, it breaks C++ global constructors
+        if test "$tagname" = CXX ; then
+        compile_command="$compile_command ${wl}-bind_at_load"
+        finalize_command="$finalize_command ${wl}-bind_at_load"
+        fi
+        ;;
+      esac
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    new_libs="$new_libs -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) new_libs="$new_libs $deplib" ;;
+	  esac
+	  ;;
+	*) new_libs="$new_libs $deplib" ;;
+	esac
+      done
+      compile_deplibs="$new_libs"
+
+
+      compile_command="$compile_command $compile_deplibs"
+      finalize_command="$finalize_command $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) perm_rpath="$perm_rpath $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$libdir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+      fi
+
+      dlsyms=
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	  dlsyms="${outputname}S.c"
+	else
+	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+	fi
+      fi
+
+      if test -n "$dlsyms"; then
+	case $dlsyms in
+	"") ;;
+	*.c)
+	  # Discover the nlist of each of the dlfiles.
+	  nlist="$output_objdir/${outputname}.nm"
+
+	  $show "$rm $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Parse the name list into a source file.
+	  $show "creating $output_objdir/$dlsyms"
+
+	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define lt_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+	  if test "$dlself" = yes; then
+	    $show "generating symbol list for \`$output'"
+
+	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+
+	    # Add our own program objects to the symbol list.
+	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	    for arg in $progfiles; do
+	      $show "extracting global C symbols from \`$arg'"
+	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	    done
+
+	    if test -n "$exclude_expsyms"; then
+	      $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+
+	    if test -n "$export_symbols_regex"; then
+	      $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+
+	    # Prepare the list of exported symbols
+	    if test -z "$export_symbols"; then
+	      export_symbols="$output_objdir/$outputname.exp"
+	      $run $rm $export_symbols
+	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+              case $host in
+              *cygwin* | *mingw* )
+	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+		$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+                ;;
+              esac
+	    else
+	      $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      $run eval 'mv "$nlist"T "$nlist"'
+              case $host in
+              *cygwin* | *mingw* )
+	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+		$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+                ;;
+              esac
+	    fi
+	  fi
+
+	  for arg in $dlprefiles; do
+	    $show "extracting global C symbols from \`$arg'"
+	    name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
+	    $run eval '$echo ": $name " >> "$nlist"'
+	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -z "$run"; then
+	    # Make sure we have at least an empty file.
+	    test -f "$nlist" || : > "$nlist"
+
+	    if test -n "$exclude_expsyms"; then
+	      $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	      $mv "$nlist"T "$nlist"
+	    fi
+
+	    # Try sorting and uniquifying the output.
+	    if grep -v "^: " < "$nlist" |
+		if sort -k 3 </dev/null >/dev/null 2>&1; then
+		  sort -k 3
+		else
+		  sort +2
+		fi |
+		uniq > "$nlist"S; then
+	      :
+	    else
+	      grep -v "^: " < "$nlist" > "$nlist"S
+	    fi
+
+	    if test -f "$nlist"S; then
+	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+	    else
+	      $echo '/* NONE */' >> "$output_objdir/$dlsyms"
+	    fi
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+
+#undef lt_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define lt_ptr void *
+#else
+# define lt_ptr char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+"
+
+	    case $host in
+	    *cygwin* | *mingw* )
+	  $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs */
+struct {
+"
+	      ;;
+	    * )
+	  $echo >> "$output_objdir/$dlsyms" "\
+const struct {
+"
+	      ;;
+	    esac
+
+
+	  $echo >> "$output_objdir/$dlsyms" "\
+  const char *name;
+  lt_ptr address;
+}
+lt_preloaded_symbols[] =
+{\
+"
+
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+  {0, (lt_ptr) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	  fi
+
+	  pic_flag_for_symtable=
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
+	    esac;;
+	  *-*-hpux*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag";;
+	    esac
+	  esac
+
+	  # Now compile the dynamic symbol file.
+	  $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+	  $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+	  # Clean up the generated files.
+	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Transform the symbol file into the correct name.
+          case $host in
+          *cygwin* | *mingw* )
+            if test -f "$output_objdir/${outputname}.def" ; then
+              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+            else
+              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+             fi
+            ;;
+          * )
+            compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+            finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+            ;;
+          esac
+	  ;;
+	*)
+	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+      else
+	# We keep going just in case the user didn't refer to
+	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+	# really was required.
+
+	# Nullify the symbol file.
+	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      fi
+
+      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+	# Replace the output file specification.
+	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command="$compile_command$compile_rpath"
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	$show "$link_command"
+	$run eval "$link_command"
+	exit_status=$?
+
+	# Delete the generated files.
+	if test -n "$dlsyms"; then
+	  $show "$rm $output_objdir/${outputname}S.${objext}"
+	  $run $rm "$output_objdir/${outputname}S.${objext}"
+	fi
+
+	exit $exit_status
+      fi
+
+      if test -n "$shlibpath_var"; then
+	# We should set the shlibpath_var
+	rpath=
+	for dir in $temp_rpath; do
+	  case $dir in
+	  [\\/]* | [A-Za-z]:[\\/]*)
+	    # Absolute path.
+	    rpath="$rpath$dir:"
+	    ;;
+	  *)
+	    # Relative path: add a thisdir entry.
+	    rpath="$rpath\$thisdir/$dir:"
+	    ;;
+	  esac
+	done
+	temp_rpath="$rpath"
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test "$no_install" = yes; then
+	# We don't need to create a wrapper script.
+	link_command="$compile_var$compile_command$compile_rpath"
+	# Replace the output file specification.
+	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$run $rm $output
+	# Link the executable and exit
+	$show "$link_command"
+	$run eval "$link_command" || exit $?
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+	$echo "$modename: \`$output' will be relinked during installation" 1>&2
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
+	else
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      $show "$link_command"
+      $run eval "$link_command" || exit $?
+
+      # Now create the wrapper script.
+      $show "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	  fi
+	done
+	relink_command="(cd `pwd`; $relink_command)"
+	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Quote $echo for shipping.
+      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
+	case $progpath in
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+	esac
+	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+      else
+	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if our run command is non-null.
+      if test -z "$run"; then
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*)
+	    exeext=.exe
+	    outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
+	  *) exeext= ;;
+	esac
+	case $host in
+	  *cygwin* | *mingw* )
+            output_name=`basename $output`
+            output_path=`dirname $output`
+            cwrappersource="$output_path/$objdir/lt-$output_name.c"
+            cwrapper="$output_path/$output_name.exe"
+            $rm $cwrappersource $cwrapper
+            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    cat > $cwrappersource <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+
+   Currently, it simply execs the wrapper *script* "/bin/sh $output",
+   but could eventually absorb all of the scripts functionality and
+   exec $objdir/$outputname directly.
+*/
+EOF
+	    cat >> $cwrappersource<<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <sys/stat.h>
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+/* -DDEBUG is fairly common in CFLAGS.  */
+#undef DEBUG
+#if defined DEBUGWRAPPER
+# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
+#else
+# define DEBUG(format, ...)
+#endif
+
+const char *program_name = NULL;
+
+void * xmalloc (size_t num);
+char * xstrdup (const char *string);
+const char * base_name (const char *name);
+char * find_executable(const char *wrapper);
+int    check_executable(const char *path);
+char * strendzap(char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  DEBUG("(main) argv[0]      : %s\n",argv[0]);
+  DEBUG("(main) program_name : %s\n",program_name);
+  newargz = XMALLOC(char *, argc+2);
+EOF
+
+            cat >> $cwrappersource <<EOF
+  newargz[0] = (char *) xstrdup("$SHELL");
+EOF
+
+            cat >> $cwrappersource <<"EOF"
+  newargz[1] = find_executable(argv[0]);
+  if (newargz[1] == NULL)
+    lt_fatal("Couldn't find %s", argv[0]);
+  DEBUG("(main) found exe at : %s\n",newargz[1]);
+  /* we know the script has the same name, without the .exe */
+  /* so make sure newargz[1] doesn't end in .exe */
+  strendzap(newargz[1],".exe");
+  for (i = 1; i < argc; i++)
+    newargz[i+1] = xstrdup(argv[i]);
+  newargz[argc+1] = NULL;
+
+  for (i=0; i<argc+1; i++)
+  {
+    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
+    ;
+  }
+
+EOF
+
+            case $host_os in
+              mingw*)
+                cat >> $cwrappersource <<EOF
+  execv("$SHELL",(char const **)newargz);
+EOF
+              ;;
+              *)
+                cat >> $cwrappersource <<EOF
+  execv("$SHELL",newargz);
+EOF
+              ;;
+            esac
+
+            cat >> $cwrappersource <<"EOF"
+  return 127;
+}
+
+void *
+xmalloc (size_t num)
+{
+  void * p = (void *) malloc (num);
+  if (!p)
+    lt_fatal ("Memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
+;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable(const char * path)
+{
+  struct stat st;
+
+  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0) &&
+      (
+        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
+#if defined (S_IXOTH)
+       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
+#endif
+#if defined (S_IXGRP)
+       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
+#endif
+       ((st.st_mode & S_IXUSR) == S_IXUSR))
+      )
+    return 1;
+  else
+    return 0;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise */
+char *
+find_executable (const char* wrapper)
+{
+  int has_slash = 0;
+  const char* p;
+  const char* p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char* concat_name;
+
+  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
+  {
+    concat_name = xstrdup (wrapper);
+    if (check_executable(concat_name))
+      return concat_name;
+    XFREE(concat_name);
+  }
+  else
+  {
+#endif
+    if (IS_DIR_SEPARATOR (wrapper[0]))
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable(concat_name))
+        return concat_name;
+      XFREE(concat_name);
+    }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+    {
+      has_slash = 1;
+      break;
+    }
+  if (!has_slash)
+  {
+    /* no slashes; search PATH */
+    const char* path = getenv ("PATH");
+    if (path != NULL)
+    {
+      for (p = path; *p; p = p_next)
+      {
+        const char* q;
+        size_t p_len;
+        for (q = p; *q; q++)
+          if (IS_PATH_SEPARATOR(*q))
+            break;
+        p_len = q - p;
+        p_next = (*q == '\0' ? q : q + 1);
+        if (p_len == 0)
+        {
+          /* empty path: current directory */
+          if (getcwd (tmp, LT_PATHMAX) == NULL)
+            lt_fatal ("getcwd failed");
+          tmp_len = strlen(tmp);
+          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+          memcpy (concat_name, tmp, tmp_len);
+          concat_name[tmp_len] = '/';
+          strcpy (concat_name + tmp_len + 1, wrapper);
+        }
+        else
+        {
+          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
+          memcpy (concat_name, p, p_len);
+          concat_name[p_len] = '/';
+          strcpy (concat_name + p_len + 1, wrapper);
+        }
+        if (check_executable(concat_name))
+          return concat_name;
+        XFREE(concat_name);
+      }
+    }
+    /* not found in PATH; assume curdir */
+  }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal ("getcwd failed");
+  tmp_len = strlen(tmp);
+  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable(concat_name))
+    return concat_name;
+  XFREE(concat_name);
+  return NULL;
+}
+
+char *
+strendzap(char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert(str != NULL);
+  assert(pat != NULL);
+
+  len = strlen(str);
+  patlen = strlen(pat);
+
+  if (patlen <= len)
+  {
+    str += len - patlen;
+    if (strcmp(str, pat) == 0)
+      *str = '\0';
+  }
+  return str;
+}
+
+static void
+lt_error_core (int exit_status, const char * mode,
+          const char * message, va_list ap)
+{
+  fprintf (stderr, "%s: %s: ", program_name, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+  va_end (ap);
+}
+EOF
+          # we should really use a build-platform specific compiler
+          # here, but OTOH, the wrappers (shell script and this C one)
+          # are only useful if you want to execute the "real" binary.
+          # Since the "real" binary is built for $host, then this
+          # wrapper might as well be built for $host, too.
+          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
+          ;;
+        esac
+        $rm $output
+        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+
+	$echo > $output "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variable:
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$echo are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    echo=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$echo works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$echo will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+	$echo >> $output "\
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+  done
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  $echo >> $output "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" || \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $mkdir \"\$progdir\"
+    else
+      $rm \"\$progdir/\$file\"
+    fi"
+
+	  $echo >> $output "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	$echo \"\$relink_command_output\" >&2
+	$rm \"\$progdir/\$file\"
+	exit $EXIT_FAILURE
+      fi
+    fi
+
+    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $rm \"\$progdir/\$program\";
+      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $rm \"\$progdir/\$file\"
+  fi"
+	else
+	  $echo >> $output "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$echo >> $output "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $echo >> $output "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	# fixup the dll searchpath if we need to.
+	if test -n "$dllsearchpath"; then
+	  $echo >> $output "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	$echo >> $output "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+"
+	case $host in
+	# Backslashes separate directories on plain windows
+	*-*-mingw | *-*-os2*)
+	  $echo >> $output "\
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+	  ;;
+
+	*)
+	  $echo >> $output "\
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+	  ;;
+	esac
+	$echo >> $output "\
+      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+      exit $EXIT_FAILURE
+    fi
+  else
+    # The program doesn't exist.
+    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$echo \"This script is just a wrapper for \$program.\" 1>&2
+    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit $EXIT_FAILURE
+  fi
+fi\
+"
+	chmod +x $output
+      fi
+      exit $EXIT_SUCCESS
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
+	  build_libtool_libs=no
+	else
+	  oldobjs="$old_deplibs $non_pic_objects"
+	fi
+	addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	generated="$generated $gentop"
+
+	func_extract_archives $gentop $addlibs
+	oldobjs="$oldobjs $func_extract_archives_result"
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+       cmds=$old_archive_from_new_cmds
+      else
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  $echo "copying selected object files to avoid basename conflicts..."
+
+	  if test -z "$gentop"; then
+	    gentop="$output_objdir/${outputname}x"
+	    generated="$generated $gentop"
+
+	    $show "${rm}r $gentop"
+	    $run ${rm}r "$gentop"
+	    $show "$mkdir $gentop"
+	    $run $mkdir "$gentop"
+	    exit_status=$?
+	    if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
+	      exit $exit_status
+	    fi
+	  fi
+
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		counter=`expr $counter + 1`
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      $run ln "$obj" "$gentop/$newobj" ||
+	      $run cp "$obj" "$gentop/$newobj"
+	      oldobjs="$oldobjs $gentop/$newobj"
+	      ;;
+	    *) oldobjs="$oldobjs $obj" ;;
+	    esac
+	  done
+	fi
+
+	eval cmds=\"$old_archive_cmds\"
+
+	if len=`expr "X$cmds" : ".*"` &&
+	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  $echo "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  for obj in $save_oldobjs
+	  do
+	    oldobjs="$objlist $obj"
+	    objlist="$objlist $obj"
+	    eval test_cmds=\"$old_archive_cmds\"
+	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+	       test "$len" -le "$max_cmd_len"; then
+	      :
+	    else
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj" ; then
+	        RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+	      objlist=
+	    fi
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test "X$oldobjs" = "X" ; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	  fi
+	fi
+      fi
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+        eval cmd=\"$cmd\"
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$generated"; then
+      $show "${rm}r$generated"
+      $run ${rm}r$generated
+    fi
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      $show "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      if test "$hardcode_automatic" = yes ; then
+	relink_command=
+      fi
+
+
+      # Only create the output if not a dry run.
+      if test -z "$run"; then
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		if test -z "$libdir"; then
+		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+		  exit $EXIT_FAILURE
+		fi
+		newdependency_libs="$newdependency_libs $libdir/$name"
+		;;
+	      *) newdependency_libs="$newdependency_libs $deplib" ;;
+	      esac
+	    done
+	    dependency_libs="$newdependency_libs"
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      if test -z "$libdir"; then
+		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+		exit $EXIT_FAILURE
+	      fi
+	      newdlfiles="$newdlfiles $libdir/$name"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      if test -z "$libdir"; then
+		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+		exit $EXIT_FAILURE
+	      fi
+	      newdlprefiles="$newdlprefiles $libdir/$name"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      newdlfiles="$newdlfiles $abs"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      newdlprefiles="$newdlprefiles $abs"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  fi
+	  $rm $output
+	  # place dlname in correct position for cygwin
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	  esac
+	  $echo > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test "$installed" = no && test "$need_relink" = yes; then
+	    $echo >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      fi
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+    ;;
+
+  # libtool install mode
+  install)
+    modename="$modename: install"
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       $echo "X$nonopt" | grep shtool > /dev/null; then
+      # Aesthetically quote it.
+      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$arg "
+      arg="$1"
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+    case $arg in
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+      arg="\"$arg\""
+      ;;
+    esac
+    install_prog="$install_prog$arg"
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+	files="$files $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f) 
+      	case " $install_prog " in
+	*[\\\ /]cp\ *) ;;
+	*) prev=$arg ;;
+	esac
+	;;
+      -g | -m | -o) prev=$arg ;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$install_prog $arg"
+    done
+
+    if test -z "$install_prog"; then
+      $echo "$modename: you must specify an install program" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prev' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	$echo "$modename: no file or destination specified" 1>&2
+      else
+	$echo "$modename: you must specify a destination" 1>&2
+      fi
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Strip any trailing slash from the destination.
+    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$destdir" = "X$dest" && destdir=.
+      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files
+      if test "$#" -gt 2; then
+	$echo "$modename: \`$dest' is not a directory" 1>&2
+	$echo "$help" 1>&2
+	exit $EXIT_FAILURE
+      fi
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	staticlibs="$staticlibs $file"
+	;;
+
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	library_names=
+	old_library=
+	relink_command=
+	# If there is no directory component, then add one.
+	case $file in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) current_libdirs="$current_libdirs $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  esac
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
+	test "X$dir" = "X$file/" && dir=
+	dir="$dir$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  if test "$inst_prefix_dir" = "$destdir"; then
+	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  $echo "$modename: warning: relinking \`$file'" 1>&2
+	  $show "$relink_command"
+	  if $run eval "$relink_command"; then :
+	  else
+	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names
+	if test -n "$2"; then
+	  realname="$2"
+	  shift
+	  shift
+
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+
+	  # Install the shared library and build the symlinks.
+	  $show "$install_prog $dir/$srcname $destdir/$realname"
+	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
+	  if test -n "$stripme" && test -n "$striplib"; then
+	    $show "$striplib $destdir/$realname"
+	    $run eval "$striplib $destdir/$realname" || exit $?
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      if test "$linkname" != "$realname"; then
+                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+	      fi
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  cmds=$postinstall_cmds
+	  save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    eval cmd=\"$cmd\"
+	    $show "$cmd"
+	    $run eval "$cmd" || {
+	      lt_exit=$?
+
+	      # Restore the uninstalled library and exit
+	      if test "$mode" = relink; then
+		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	      fi
+
+	      exit $lt_exit
+	    }
+	  done
+	  IFS="$save_ifs"
+	fi
+
+	# Install the pseudo-library for information purposes.
+	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	instname="$dir/$name"i
+	$show "$install_prog $instname $destdir/$name"
+	$run eval "$install_prog $instname $destdir/$name" || exit $?
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	if test -n "$destfile"; then
+	  $show "$install_prog $file $destfile"
+	  $run eval "$install_prog $file $destfile" || exit $?
+	fi
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
+
+	  $show "$install_prog $staticobj $staticdest"
+	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=""
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      file=`$echo $file|${SED} 's,.exe$,,'`
+	      stripped_ext=".exe"
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin*|*mingw*)
+	    wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  # Note that it is not necessary on cygwin/mingw to append a dot to
+	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
+	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+	  # `FILE.' does not work on cygwin managed mounts.
+	  #
+	  # If there is no directory component, then add one.
+	  case $wrapper in
+	  */* | *\\*) . ${wrapper} ;;
+	  *) . ./${wrapper} ;;
+	  esac
+
+	  # Check the variables that should have been set.
+	  if test -z "$notinst_deplibs"; then
+	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+
+	  finalize=yes
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      # If there is no directory component, then add one.
+	      case $lib in
+	      */* | *\\*) . $lib ;;
+	      *) . ./$lib ;;
+	      esac
+	    fi
+	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+	      finalize=no
+	    fi
+	  done
+
+	  relink_command=
+	  # Note that it is not necessary on cygwin/mingw to append a dot to
+	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
+	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+	  # `FILE.' does not work on cygwin managed mounts.
+	  #
+	  # If there is no directory component, then add one.
+	  case $wrapper in
+	  */* | *\\*) . ${wrapper} ;;
+	  *) . ./${wrapper} ;;
+	  esac
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    if test "$finalize" = yes && test -z "$run"; then
+	      tmpdir=`func_mktempdir`
+	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
+	      outputname="$tmpdir/$file"
+	      # Replace the output file specification.
+	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+	      $show "$relink_command"
+	      if $run eval "$relink_command"; then :
+	      else
+		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+		${rm}r "$tmpdir"
+		continue
+	      fi
+	      file="$outputname"
+	    else
+	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
+	    fi
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway 
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
+	    ;;
+	  esac
+	  ;;
+	esac
+	$show "$install_prog$stripme $file $destfile"
+	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+	test -n "$outputname" && ${rm}r "$tmpdir"
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      $show "$install_prog $file $oldlib"
+      $run eval "$install_prog \$file \$oldlib" || exit $?
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	$show "$old_striplib $oldlib"
+	$run eval "$old_striplib $oldlib" || exit $?
+      fi
+
+      # Do each command in the postinstall commands.
+      cmds=$old_postinstall_cmds
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	eval cmd=\"$cmd\"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$future_libdirs"; then
+      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+    fi
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      test -n "$run" && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+    ;;
+
+  # libtool finish mode
+  finish)
+    modename="$modename: finish"
+    libdirs="$nonopt"
+    admincmds=
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+	libdirs="$libdirs $dir"
+      done
+
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  cmds=$finish_cmds
+	  save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    eval cmd=\"$cmd\"
+	    $show "$cmd"
+	    $run eval "$cmd" || admincmds="$admincmds
+       $cmd"
+	  done
+	  IFS="$save_ifs"
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $run eval "$cmds" || admincmds="$admincmds
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    test "$show" = : && exit $EXIT_SUCCESS
+
+    $echo "X----------------------------------------------------------------------" | $Xsed
+    $echo "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      $echo "   $libdir"
+    done
+    $echo
+    $echo "If you ever happen to want to link against installed libraries"
+    $echo "in a given directory, LIBDIR, you must either use libtool, and"
+    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    $echo "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      $echo "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+      $echo "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
+
+      $echo "   - use the \`$flag' linker flag"
+    fi
+    if test -n "$admincmds"; then
+      $echo "   - have your system administrator run these commands:$admincmds"
+    fi
+    if test -f /etc/ld.so.conf; then
+      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    $echo
+    $echo "See any operating system documentation about shared libraries for"
+    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
+    $echo "X----------------------------------------------------------------------" | $Xsed
+    exit $EXIT_SUCCESS
+    ;;
+
+  # libtool execute mode
+  execute)
+    modename="$modename: execute"
+
+    # The first argument is the command name.
+    cmd="$nonopt"
+    if test -z "$cmd"; then
+      $echo "$modename: you must specify a COMMAND" 1>&2
+      $echo "$help"
+      exit $EXIT_FAILURE
+    fi
+
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      if test ! -f "$file"; then
+	$echo "$modename: \`$file' is not a file" 1>&2
+	$echo "$help" 1>&2
+	exit $EXIT_FAILURE
+      fi
+
+      dir=
+      case $file in
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+
+	# If there is no directory component, then add one.
+	case $file in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  dir="$dir/$objdir"
+	else
+	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+	;;
+
+      *)
+	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -*) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  # If there is no directory component, then add one.
+	  case $file in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+      args="$args \"$file\""
+    done
+
+    if test -z "$run"; then
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      if test "${save_LC_ALL+set}" = set; then
+	LC_ALL="$save_LC_ALL"; export LC_ALL
+      fi
+      if test "${save_LANG+set}" = set; then
+	LANG="$save_LANG"; export LANG
+      fi
+
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+	$echo "export $shlibpath_var"
+      fi
+      $echo "$cmd$args"
+      exit $EXIT_SUCCESS
+    fi
+    ;;
+
+  # libtool clean and uninstall mode
+  clean | uninstall)
+    modename="$modename: $mode"
+    rm="$nonopt"
+    files=
+    rmforce=
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    for arg
+    do
+      case $arg in
+      -f) rm="$rm $arg"; rmforce=yes ;;
+      -*) rm="$rm $arg" ;;
+      *) files="$files $arg" ;;
+      esac
+    done
+
+    if test -z "$rm"; then
+      $echo "$modename: you must specify an RM program" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    rmdirs=
+
+    origobjdir="$objdir"
+    for file in $files; do
+      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+      if test "X$dir" = "X$file"; then
+	dir=.
+	objdir="$origobjdir"
+      else
+	objdir="$dir/$origobjdir"
+      fi
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+      test "$mode" = uninstall && objdir="$dir"
+
+      # Remember objdir for removal later, being careful to avoid duplicates
+      if test "$mode" = clean; then
+	case " $rmdirs " in
+	  *" $objdir "*) ;;
+	  *) rmdirs="$rmdirs $objdir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if (test -L "$file") >/dev/null 2>&1 \
+	|| (test -h "$file") >/dev/null 2>&1 \
+	|| test -f "$file"; then
+	:
+      elif test -d "$file"; then
+	exit_status=1
+	continue
+      elif test "$rmforce" = yes; then
+	continue
+      fi
+
+      rmfiles="$file"
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  . $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    rmfiles="$rmfiles $objdir/$n"
+	  done
+	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+
+	  case "$mode" in
+	  clean)
+	    case "  $library_names " in
+	    # "  " in the beginning catches empty $dlname
+	    *" $dlname "*) ;;
+	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
+	    esac
+	     test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+	    ;;
+	  uninstall)
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      cmds=$postuninstall_cmds
+	      save_ifs="$IFS"; IFS='~'
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
+		$show "$cmd"
+		$run eval "$cmd"
+		if test "$?" -ne 0 && test "$rmforce" != yes; then
+		  exit_status=1
+		fi
+	      done
+	      IFS="$save_ifs"
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      cmds=$old_postuninstall_cmds
+	      save_ifs="$IFS"; IFS='~'
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
+		$show "$cmd"
+		$run eval "$cmd"
+		if test "$?" -ne 0 && test "$rmforce" != yes; then
+		  exit_status=1
+		fi
+	      done
+	      IFS="$save_ifs"
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	    ;;
+	  esac
+	fi
+	;;
+
+      *.lo)
+	# Possibly a libtool object, so verify it.
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+
+	  # Read the .lo file
+	  . $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+	  if test -n "$pic_object" \
+	     && test "$pic_object" != none; then
+	    rmfiles="$rmfiles $dir/$pic_object"
+	  fi
+
+	  # Add non-PIC object to the list of files to remove.
+	  if test -n "$non_pic_object" \
+	     && test "$non_pic_object" != none; then
+	    rmfiles="$rmfiles $dir/$non_pic_object"
+	  fi
+	fi
+	;;
+
+      *)
+	if test "$mode" = clean ; then
+	  noexename=$name
+	  case $file in
+	  *.exe)
+	    file=`$echo $file|${SED} 's,.exe$,,'`
+	    noexename=`$echo $name|${SED} 's,.exe$,,'`
+	    # $file with .exe has already been added to rmfiles,
+	    # add $file without .exe
+	    rmfiles="$rmfiles $file"
+	    ;;
+	  esac
+	  # Do a test to see if this is a libtool program.
+	  if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	    relink_command=
+	    . $dir/$noexename
+
+	    # note $name still contains .exe if it was in $file originally
+	    # as does the version of $file that was added into $rmfiles
+	    rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+	    if test "$fast_install" = yes && test -n "$relink_command"; then
+	      rmfiles="$rmfiles $objdir/lt-$name"
+	    fi
+	    if test "X$noexename" != "X$name" ; then
+	      rmfiles="$rmfiles $objdir/lt-${noexename}.c"
+	    fi
+	  fi
+	fi
+	;;
+      esac
+      $show "$rm $rmfiles"
+      $run $rm $rmfiles || exit_status=1
+    done
+    objdir="$origobjdir"
+
+    # Try to remove the ${objdir}s in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	$show "rmdir $dir"
+	$run rmdir $dir >/dev/null 2>&1
+      fi
+    done
+
+    exit $exit_status
+    ;;
+
+  "")
+    $echo "$modename: you must specify a MODE" 1>&2
+    $echo "$generic_help" 1>&2
+    exit $EXIT_FAILURE
+    ;;
+  esac
+
+  if test -z "$exec_cmd"; then
+    $echo "$modename: invalid operation mode \`$mode'" 1>&2
+    $echo "$generic_help" 1>&2
+    exit $EXIT_FAILURE
+  fi
+fi # test -z "$show_help"
+
+if test -n "$exec_cmd"; then
+  eval exec $exec_cmd
+  exit $EXIT_FAILURE
+fi
+
+# We need to display help for each of the modes.
+case $mode in
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
+
+Provide generalized library-building support services.
+
+    --config          show all configuration variables
+    --debug           enable verbose shell tracing
+-n, --dry-run         display commands without modifying any files
+    --features        display basic configuration information and exit
+    --finish          same as \`--mode=finish'
+    --help            display this help message and exit
+    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
+    --quiet           same as \`--silent'
+    --silent          don't print informational messages
+    --tag=TAG         use configuration variables from tag TAG
+    --version         print version information
+
+MODE must be one of the following:
+
+      clean           remove files from the build directory
+      compile         compile a source file into a libtool object
+      execute         automatically set library path, then run a program
+      finish          complete the installation of libtool libraries
+      install         install libraries or executables
+      link            create a library or an executable
+      uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE.
+
+Report bugs to <bug-libtool at gnu.org>."
+  exit $EXIT_SUCCESS
+  ;;
+
+clean)
+  $echo \
+"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+compile)
+  $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
+  -static           always build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+  ;;
+
+execute)
+  $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+  ;;
+
+finish)
+  $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+  ;;
+
+install)
+  $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+  ;;
+
+link)
+  $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+		    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+		    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -static           do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+		    specify library version info [each variable defaults to 0]
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+  ;;
+
+uninstall)
+  $echo \
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+*)
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$help" 1>&2
+  exit $EXIT_FAILURE
+  ;;
+esac
+
+$echo
+$echo "Try \`$modename --help' for more information about other modes."
+
+exit $?
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+disable_libs=shared
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+disable_libs=static
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:

Added: freeswitch/trunk/libs/speex/missing
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/missing	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,360 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2003-09-02.23
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 
+#   Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake at gnu.org>."
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+  aclocal*)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' $msg.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+       # We have makeinfo, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+    fi
+    touch $file
+    ;;
+
+  tar)
+    shift
+    if test -n "$run"; then
+      echo 1>&2 "ERROR: \`tar' requires --run"
+      exit 1
+    fi
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case "$firstarg" in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case "$firstarg" in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

Added: freeswitch/trunk/libs/speex/speex.m4
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/speex.m4	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,104 @@
+# Configure paths for libspeex
+# Jean-Marc Valin <jean-marc.valin at usherbrooke.ca>
+# Shamelessly stolen from:
+# Jack Moffitt <jack at icecast.org> 10-21-2000
+# Shamelessly stolen from Owen Taylor and Manish Singh
+
+dnl XIPH_PATH_SPEEX([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
+dnl Test for libspeex, and define SPEEX_CFLAGS and SPEEX_LIBS
+dnl
+AC_DEFUN([XIPH_PATH_SPEEX],
+[dnl 
+dnl Get the cflags and libraries
+dnl
+AC_ARG_WITH(speex,[  --with-speex=PFX   Prefix where libspeex is installed (optional)], speex_prefix="$withval", speex_prefix="")
+AC_ARG_WITH(speex-libraries,[  --with-speex-libraries=DIR   Directory where libspeex library is installed (optional)], speex_libraries="$withval", speex_libraries="")
+AC_ARG_WITH(speex-includes,[  --with-speex-includes=DIR   Directory where libspeex header files are installed (optional)], speex_includes="$withval", speex_includes="")
+AC_ARG_ENABLE(speextest, [  --disable-speextest       Do not try to compile and run a test Speex program],, enable_speextest=yes)
+
+  if test "x$speex_libraries" != "x" ; then
+    SPEEX_LIBS="-L$speex_libraries"
+  elif test "x$speex_prefix" != "x" ; then
+    SPEEX_LIBS="-L$speex_prefix/lib"
+  elif test "x$prefix" != "xNONE" ; then
+    SPEEX_LIBS="-L$prefix/lib"
+  fi
+
+  SPEEX_LIBS="$SPEEX_LIBS -lspeex"
+
+  if test "x$speex_includes" != "x" ; then
+    SPEEX_CFLAGS="-I$speex_includes"
+  elif test "x$speex_prefix" != "x" ; then
+    SPEEX_CFLAGS="-I$speex_prefix/include"
+  elif test "x$prefix" != "xNONE"; then
+    SPEEX_CFLAGS="-I$prefix/include"
+  fi
+
+  AC_MSG_CHECKING(for Speex)
+  no_speex=""
+
+
+  if test "x$enable_speextest" = "xyes" ; then
+    ac_save_CFLAGS="$CFLAGS"
+    ac_save_LIBS="$LIBS"
+    CFLAGS="$CFLAGS $SPEEX_CFLAGS"
+    LIBS="$LIBS $SPEEX_LIBS"
+dnl
+dnl Now check if the installed Speex is sufficiently new.
+dnl
+      rm -f conf.speextest
+      AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <speex/speex.h>
+
+int main ()
+{
+  system("touch conf.speextest");
+  return 0;
+}
+
+],, no_speex=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+  fi
+
+  if test "x$no_speex" = "x" ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$1], , :, [$1])     
+  else
+     AC_MSG_RESULT(no)
+     if test -f conf.speextest ; then
+       :
+     else
+       echo "*** Could not run Speex test program, checking why..."
+       CFLAGS="$CFLAGS $SPEEX_CFLAGS"
+       LIBS="$LIBS $SPEEX_LIBS"
+       AC_TRY_LINK([
+#include <stdio.h>
+#include <speex/speex.h>
+],     [ return 0; ],
+       [ echo "*** The test program compiled, but did not run. This usually means"
+       echo "*** that the run-time linker is not finding Speex or finding the wrong"
+       echo "*** version of Speex. If it is not finding Speex, you'll need to set your"
+       echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+       echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+       echo "*** is required on your system"
+       echo "***"
+       echo "*** If you have an old version installed, it is best to remove it, although"
+       echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+       [ echo "*** The test program failed to compile or link. See the file config.log for the"
+       echo "*** exact error that occured. This usually means Speex was incorrectly installed"
+       echo "*** or that you have moved Speex since it was installed." ])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+     SPEEX_CFLAGS=""
+     SPEEX_LIBS=""
+     ifelse([$2], , :, [$2])
+  fi
+  AC_SUBST(SPEEX_CFLAGS)
+  AC_SUBST(SPEEX_LIBS)
+  rm -f conf.speextest
+])

Added: freeswitch/trunk/libs/speex/speex.pc.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/speex.pc.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,14 @@
+# libspeex pkg-config source file
+
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@
+
+Name: speex
+Description: Speex is an audio codec tuned for speech
+Version: @SPEEX_VERSION@
+Requires:
+Conflicts:
+Libs: -L${libdir} -lspeex
+Cflags: -I${includedir}

Added: freeswitch/trunk/libs/speex/src/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/src/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,26 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# $Id: Makefile.am,v 1.11 2004/02/18 06:59:40 jm Exp $
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+INCLUDES = -I$(top_srcdir)/include -I$(top_builddir)/include -I$(top_builddir) @OGG_CFLAGS@
+
+mandir = $(prefix)/share/man
+man_MANS = speexenc.1 speexdec.1
+
+EXTRA_DIST = $(man_MANS) getopt_win.h getopt.c getopt1.c wave_out.c wave_out.h skeleton.h
+
+include_HEADERS = 
+noinst_HEADERS = wav_io.h
+
+bin_PROGRAMS = speexenc speexdec
+
+speexenc_SOURCES = speexenc.c wav_io.c skeleton.c
+speexenc_LDADD = $(top_builddir)/libspeex/libspeex.la \
+	$(OGG_LIBS)
+
+speexdec_SOURCES = speexdec.c wav_io.c
+speexdec_LDADD = $(top_builddir)/libspeex/libspeex.la \
+	$(OGG_LIBS)

Added: freeswitch/trunk/libs/speex/src/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/src/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,564 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# $Id: Makefile.am,v 1.11 2004/02/18 06:59:40 jm Exp $
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+
+SOURCES = $(speexdec_SOURCES) $(speexenc_SOURCES)
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+bin_PROGRAMS = speexenc$(EXEEXT) speexdec$(EXEEXT)
+subdir = src
+DIST_COMMON = $(include_HEADERS) $(noinst_HEADERS) \
+	$(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)"
+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+PROGRAMS = $(bin_PROGRAMS)
+am_speexdec_OBJECTS = speexdec.$(OBJEXT) wav_io.$(OBJEXT)
+speexdec_OBJECTS = $(am_speexdec_OBJECTS)
+am__DEPENDENCIES_1 =
+speexdec_DEPENDENCIES = $(top_builddir)/libspeex/libspeex.la \
+	$(am__DEPENDENCIES_1)
+am_speexenc_OBJECTS = speexenc.$(OBJEXT) wav_io.$(OBJEXT) \
+	skeleton.$(OBJEXT)
+speexenc_OBJECTS = $(am_speexenc_OBJECTS)
+speexenc_DEPENDENCIES = $(top_builddir)/libspeex/libspeex.la \
+	$(am__DEPENDENCIES_1)
+DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+ at AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/skeleton.Po \
+ at AMDEP_TRUE@	./$(DEPDIR)/speexdec.Po ./$(DEPDIR)/speexenc.Po \
+ at AMDEP_TRUE@	./$(DEPDIR)/wav_io.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(speexdec_SOURCES) $(speexenc_SOURCES)
+DIST_SOURCES = $(speexdec_SOURCES) $(speexenc_SOURCES)
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+includeHEADERS_INSTALL = $(INSTALL_HEADER)
+HEADERS = $(include_HEADERS) $(noinst_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = $(prefix)/share/man
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+INCLUDES = -I$(top_srcdir)/include -I$(top_builddir)/include -I$(top_builddir) @OGG_CFLAGS@
+man_MANS = speexenc.1 speexdec.1
+EXTRA_DIST = $(man_MANS) getopt_win.h getopt.c getopt1.c wave_out.c wave_out.h skeleton.h
+include_HEADERS = 
+noinst_HEADERS = wav_io.h
+speexenc_SOURCES = speexenc.c wav_io.c skeleton.c
+speexenc_LDADD = $(top_builddir)/libspeex/libspeex.la \
+	$(OGG_LIBS)
+
+speexdec_SOURCES = speexdec.c wav_io.c
+speexdec_LDADD = $(top_builddir)/libspeex/libspeex.la \
+	$(OGG_LIBS)
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  src/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  src/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  if test -f $$p \
+	     || test -f $$p1 \
+	  ; then \
+	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
+	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
+	  else :; fi; \
+	done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
+	done
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  echo " rm -f $$p $$f"; \
+	  rm -f $$p $$f ; \
+	done
+speexdec$(EXEEXT): $(speexdec_OBJECTS) $(speexdec_DEPENDENCIES) 
+	@rm -f speexdec$(EXEEXT)
+	$(LINK) $(speexdec_LDFLAGS) $(speexdec_OBJECTS) $(speexdec_LDADD) $(LIBS)
+speexenc$(EXEEXT): $(speexenc_OBJECTS) $(speexenc_DEPENDENCIES) 
+	@rm -f speexenc$(EXEEXT)
+	$(LINK) $(speexenc_LDFLAGS) $(speexenc_OBJECTS) $(speexenc_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/skeleton.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/speexdec.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/speexenc.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/wav_io.Po at am__quote@
+
+.c.o:
+ at am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+ at am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@	$(COMPILE) -c $<
+
+.c.obj:
+ at am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
+ at am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+ at am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+ at am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+install-man1: $(man1_MANS) $(man_MANS)
+	@$(NORMAL_INSTALL)
+	test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
+	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+	for i in $$l2; do \
+	  case "$$i" in \
+	    *.1*) list="$$list $$i" ;; \
+	  esac; \
+	done; \
+	for i in $$list; do \
+	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
+	  else file=$$i; fi; \
+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+	  case "$$ext" in \
+	    1*) ;; \
+	    *) ext='1' ;; \
+	  esac; \
+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
+	done
+uninstall-man1:
+	@$(NORMAL_UNINSTALL)
+	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+	for i in $$l2; do \
+	  case "$$i" in \
+	    *.1*) list="$$list $$i" ;; \
+	  esac; \
+	done; \
+	for i in $$list; do \
+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+	  case "$$ext" in \
+	    1*) ;; \
+	    *) ext='1' ;; \
+	  esac; \
+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
+	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
+	done
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)"
+	@list='$(include_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
+	  $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(includedir)/$$f"; \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS)
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)"; do \
+	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-includeHEADERS install-man
+
+install-exec-am: install-binPROGRAMS
+
+install-info: install-info-am
+
+install-man: install-man1
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
+	uninstall-info-am uninstall-man
+
+uninstall-man: uninstall-man1
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+	clean-generic clean-libtool ctags distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-binPROGRAMS install-data install-data-am install-exec \
+	install-exec-am install-includeHEADERS install-info \
+	install-info-am install-man install-man1 install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-binPROGRAMS \
+	uninstall-includeHEADERS uninstall-info-am uninstall-man \
+	uninstall-man1
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/src/getopt.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/src/getopt.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,1047 @@
+/* Getopt for GNU.
+   NOTE: getopt is now part of the C library, so if you don't know what
+   "Keep this file name-space clean" means, talk to drepper at gnu.org
+   before changing it!
+
+   Copyright (C) 1987, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99
+   	Free Software Foundation, Inc.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+/* This tells Alpha OSF/1 not to define a getopt prototype in <stdio.h>.
+   Ditto for AIX 3.2 and <stdlib.h>.  */
+#ifndef _NO_PROTO
+# define _NO_PROTO
+#endif
+
+#ifdef HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+#if !defined __STDC__ || !__STDC__
+/* This is a separate conditional since some stdc systems
+   reject `defined (const)'.  */
+# ifndef const
+#  define const
+# endif
+#endif
+
+#include <stdio.h>
+
+/* Comment out all this code if we are using the GNU C Library, and are not
+   actually compiling the library itself.  This code is part of the GNU C
+   Library, but also included in many other GNU distributions.  Compiling
+   and linking in this code is a waste when using the GNU C library
+   (especially if it is a shared library).  Rather than having every GNU
+   program understand `configure --with-gnu-libc' and omit the object files,
+   it is simpler to just do this in the source for each such file.  */
+
+#define GETOPT_INTERFACE_VERSION 2
+#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2
+# include <gnu-versions.h>
+# if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION
+#  define ELIDE_CODE
+# endif
+#endif
+
+#ifndef ELIDE_CODE
+
+
+/* This needs to come after some library #include
+   to get __GNU_LIBRARY__ defined.  */
+#ifdef	__GNU_LIBRARY__
+/* Don't include stdlib.h for non-GNU C libraries because some of them
+   contain conflicting prototypes for getopt.  */
+# include <stdlib.h>
+# include <unistd.h>
+#endif	/* GNU C library.  */
+
+#ifdef VMS
+# include <unixlib.h>
+# if HAVE_STRING_H - 0
+#  include <string.h>
+# endif
+#endif
+
+#ifndef _
+/* This is for other GNU distributions with internationalized messages.
+   When compiling libc, the _ macro is predefined.  */
+# ifdef HAVE_LIBINTL_H
+#  include <libintl.h>
+#  define _(msgid)	gettext (msgid)
+# else
+#  define _(msgid)	(msgid)
+# endif
+#endif
+
+/* This version of `getopt' appears to the caller like standard Unix `getopt'
+   but it behaves differently for the user, since it allows the user
+   to intersperse the options with the other arguments.
+
+   As `getopt' works, it permutes the elements of ARGV so that,
+   when it is done, all the options precede everything else.  Thus
+   all application programs are extended to handle flexible argument order.
+
+   Setting the environment variable POSIXLY_CORRECT disables permutation.
+   Then the behavior is completely standard.
+
+   GNU application programs can use a third alternative mode in which
+   they can distinguish the relative order of options and other arguments.  */
+
+#include "getopt_win.h"
+
+/* For communication from `getopt' to the caller.
+   When `getopt' finds an option that takes an argument,
+   the argument value is returned here.
+   Also, when `ordering' is RETURN_IN_ORDER,
+   each non-option ARGV-element is returned here.  */
+
+char *optarg;
+
+/* Index in ARGV of the next element to be scanned.
+   This is used for communication to and from the caller
+   and for communication between successive calls to `getopt'.
+
+   On entry to `getopt', zero means this is the first call; initialize.
+
+   When `getopt' returns -1, this is the index of the first of the
+   non-option elements that the caller should itself scan.
+
+   Otherwise, `optind' communicates from one call to the next
+   how much of ARGV has been scanned so far.  */
+
+/* 1003.2 says this must be 1 before any call.  */
+int optind = 1;
+
+/* Formerly, initialization of getopt depended on optind==0, which
+   causes problems with re-calling getopt as programs generally don't
+   know that. */
+
+int __getopt_initialized;
+
+/* The next char to be scanned in the option-element
+   in which the last option character we returned was found.
+   This allows us to pick up the scan where we left off.
+
+   If this is zero, or a null string, it means resume the scan
+   by advancing to the next ARGV-element.  */
+
+static char *nextchar;
+
+/* Callers store zero here to inhibit the error message
+   for unrecognized options.  */
+
+int opterr = 1;
+
+/* Set to an option character which was unrecognized.
+   This must be initialized on some systems to avoid linking in the
+   system's own getopt implementation.  */
+
+int optopt = '?';
+
+/* Describe how to deal with options that follow non-option ARGV-elements.
+
+   If the caller did not specify anything,
+   the default is REQUIRE_ORDER if the environment variable
+   POSIXLY_CORRECT is defined, PERMUTE otherwise.
+
+   REQUIRE_ORDER means don't recognize them as options;
+   stop option processing when the first non-option is seen.
+   This is what Unix does.
+   This mode of operation is selected by either setting the environment
+   variable POSIXLY_CORRECT, or using `+' as the first character
+   of the list of option characters.
+
+   PERMUTE is the default.  We permute the contents of ARGV as we scan,
+   so that eventually all the non-options are at the end.  This allows options
+   to be given in any order, even with programs that were not written to
+   expect this.
+
+   RETURN_IN_ORDER is an option available to programs that were written
+   to expect options and other ARGV-elements in any order and that care about
+   the ordering of the two.  We describe each non-option ARGV-element
+   as if it were the argument of an option with character code 1.
+   Using `-' as the first character of the list of option characters
+   selects this mode of operation.
+
+   The special argument `--' forces an end of option-scanning regardless
+   of the value of `ordering'.  In the case of RETURN_IN_ORDER, only
+   `--' can cause `getopt' to return -1 with `optind' != ARGC.  */
+
+static enum
+{
+  REQUIRE_ORDER, PERMUTE, RETURN_IN_ORDER
+} ordering;
+
+/* Value of POSIXLY_CORRECT environment variable.  */
+static char *posixly_correct;
+
+#ifdef	__GNU_LIBRARY__
+/* We want to avoid inclusion of string.h with non-GNU libraries
+   because there are many ways it can cause trouble.
+   On some systems, it contains special magic macros that don't work
+   in GCC.  */
+# include <string.h>
+# define my_index	strchr
+#else
+
+#include <string.h>
+
+/* Avoid depending on library functions or files
+   whose names are inconsistent.  */
+
+#ifndef getenv
+extern char *getenv ();
+#endif
+
+static char *
+my_index (str, chr)
+     const char *str;
+     int chr;
+{
+  while (*str)
+    {
+      if (*str == chr)
+	return (char *) str;
+      str++;
+    }
+  return 0;
+}
+
+/* If using GCC, we can safely declare strlen this way.
+   If not using GCC, it is ok not to declare it.  */
+#ifdef __GNUC__
+/* Note that Motorola Delta 68k R3V7 comes with GCC but not stddef.h.
+   That was relevant to code that was here before.  */
+# if (!defined __STDC__ || !__STDC__) && !defined strlen
+/* gcc with -traditional declares the built-in strlen to return int,
+   and has done so at least since version 2.4.5. -- rms.  */
+extern int strlen (const char *);
+# endif /* not __STDC__ */
+#endif /* __GNUC__ */
+
+#endif /* not __GNU_LIBRARY__ */
+
+/* Handle permutation of arguments.  */
+
+/* Describe the part of ARGV that contains non-options that have
+   been skipped.  `first_nonopt' is the index in ARGV of the first of them;
+   `last_nonopt' is the index after the last of them.  */
+
+static int first_nonopt;
+static int last_nonopt;
+
+#ifdef _LIBC
+/* Bash 2.0 gives us an environment variable containing flags
+   indicating ARGV elements that should not be considered arguments.  */
+
+/* Defined in getopt_init.c  */
+extern char *__getopt_nonoption_flags;
+
+static int nonoption_flags_max_len;
+static int nonoption_flags_len;
+
+static int original_argc;
+static char *const *original_argv;
+
+/* Make sure the environment variable bash 2.0 puts in the environment
+   is valid for the getopt call we must make sure that the ARGV passed
+   to getopt is that one passed to the process.  */
+static void
+__attribute__ ((unused))
+store_args_and_env (int argc, char *const *argv)
+{
+  /* XXX This is no good solution.  We should rather copy the args so
+     that we can compare them later.  But we must not use malloc(3).  */
+  original_argc = argc;
+  original_argv = argv;
+}
+# ifdef text_set_element
+text_set_element (__libc_subinit, store_args_and_env);
+# endif /* text_set_element */
+
+# define SWAP_FLAGS(ch1, ch2) \
+  if (nonoption_flags_len > 0)						      \
+    {									      \
+      char __tmp = __getopt_nonoption_flags[ch1];			      \
+      __getopt_nonoption_flags[ch1] = __getopt_nonoption_flags[ch2];	      \
+      __getopt_nonoption_flags[ch2] = __tmp;				      \
+    }
+#else	/* !_LIBC */
+# define SWAP_FLAGS(ch1, ch2)
+#endif	/* _LIBC */
+
+/* Exchange two adjacent subsequences of ARGV.
+   One subsequence is elements [first_nonopt,last_nonopt)
+   which contains all the non-options that have been skipped so far.
+   The other is elements [last_nonopt,optind), which contains all
+   the options processed since those non-options were skipped.
+
+   `first_nonopt' and `last_nonopt' are relocated so that they describe
+   the new indices of the non-options in ARGV after they are moved.  */
+
+#if defined __STDC__ && __STDC__
+static void exchange (char **);
+#endif
+
+static void
+exchange (argv)
+     char **argv;
+{
+  int bottom = first_nonopt;
+  int middle = last_nonopt;
+  int top = optind;
+  char *tem;
+
+  /* Exchange the shorter segment with the far end of the longer segment.
+     That puts the shorter segment into the right place.
+     It leaves the longer segment in the right place overall,
+     but it consists of two parts that need to be swapped next.  */
+
+#ifdef _LIBC
+  /* First make sure the handling of the `__getopt_nonoption_flags'
+     string can work normally.  Our top argument must be in the range
+     of the string.  */
+  if (nonoption_flags_len > 0 && top >= nonoption_flags_max_len)
+    {
+      /* We must extend the array.  The user plays games with us and
+	 presents new arguments.  */
+      char *new_str = malloc (top + 1);
+      if (new_str == NULL)
+	nonoption_flags_len = nonoption_flags_max_len = 0;
+      else
+	{
+	  memset (__mempcpy (new_str, __getopt_nonoption_flags,
+			     nonoption_flags_max_len),
+		  '\0', top + 1 - nonoption_flags_max_len);
+	  nonoption_flags_max_len = top + 1;
+	  __getopt_nonoption_flags = new_str;
+	}
+    }
+#endif
+
+  while (top > middle && middle > bottom)
+    {
+      if (top - middle > middle - bottom)
+	{
+	  /* Bottom segment is the short one.  */
+	  int len = middle - bottom;
+	  register int i;
+
+	  /* Swap it with the top part of the top segment.  */
+	  for (i = 0; i < len; i++)
+	    {
+	      tem = argv[bottom + i];
+	      argv[bottom + i] = argv[top - (middle - bottom) + i];
+	      argv[top - (middle - bottom) + i] = tem;
+	      SWAP_FLAGS (bottom + i, top - (middle - bottom) + i);
+	    }
+	  /* Exclude the moved bottom segment from further swapping.  */
+	  top -= len;
+	}
+      else
+	{
+	  /* Top segment is the short one.  */
+	  int len = top - middle;
+	  register int i;
+
+	  /* Swap it with the bottom part of the bottom segment.  */
+	  for (i = 0; i < len; i++)
+	    {
+	      tem = argv[bottom + i];
+	      argv[bottom + i] = argv[middle + i];
+	      argv[middle + i] = tem;
+	      SWAP_FLAGS (bottom + i, middle + i);
+	    }
+	  /* Exclude the moved top segment from further swapping.  */
+	  bottom += len;
+	}
+    }
+
+  /* Update records for the slots the non-options now occupy.  */
+
+  first_nonopt += (optind - last_nonopt);
+  last_nonopt = optind;
+}
+
+/* Initialize the internal data when the first call is made.  */
+
+#if defined __STDC__ && __STDC__
+static const char *_getopt_initialize (int, char *const *, const char *);
+#endif
+static const char *
+_getopt_initialize (argc, argv, optstring)
+     int argc;
+     char *const *argv;
+     const char *optstring;
+{
+  /* Start processing options with ARGV-element 1 (since ARGV-element 0
+     is the program name); the sequence of previously skipped
+     non-option ARGV-elements is empty.  */
+
+  first_nonopt = last_nonopt = optind;
+
+  nextchar = NULL;
+
+  posixly_correct = getenv ("POSIXLY_CORRECT");
+
+  /* Determine how to handle the ordering of options and nonoptions.  */
+
+  if (optstring[0] == '-')
+    {
+      ordering = RETURN_IN_ORDER;
+      ++optstring;
+    }
+  else if (optstring[0] == '+')
+    {
+      ordering = REQUIRE_ORDER;
+      ++optstring;
+    }
+  else if (posixly_correct != NULL)
+    ordering = REQUIRE_ORDER;
+  else
+    ordering = PERMUTE;
+
+#ifdef _LIBC
+  if (posixly_correct == NULL
+      && argc == original_argc && argv == original_argv)
+    {
+      if (nonoption_flags_max_len == 0)
+	{
+	  if (__getopt_nonoption_flags == NULL
+	      || __getopt_nonoption_flags[0] == '\0')
+	    nonoption_flags_max_len = -1;
+	  else
+	    {
+	      const char *orig_str = __getopt_nonoption_flags;
+	      int len = nonoption_flags_max_len = strlen (orig_str);
+	      if (nonoption_flags_max_len < argc)
+		nonoption_flags_max_len = argc;
+	      __getopt_nonoption_flags =
+		(char *) malloc (nonoption_flags_max_len);
+	      if (__getopt_nonoption_flags == NULL)
+		nonoption_flags_max_len = -1;
+	      else
+		memset (__mempcpy (__getopt_nonoption_flags, orig_str, len),
+			'\0', nonoption_flags_max_len - len);
+	    }
+	}
+      nonoption_flags_len = nonoption_flags_max_len;
+    }
+  else
+    nonoption_flags_len = 0;
+#endif
+
+  return optstring;
+}
+
+/* Scan elements of ARGV (whose length is ARGC) for option characters
+   given in OPTSTRING.
+
+   If an element of ARGV starts with '-', and is not exactly "-" or "--",
+   then it is an option element.  The characters of this element
+   (aside from the initial '-') are option characters.  If `getopt'
+   is called repeatedly, it returns successively each of the option characters
+   from each of the option elements.
+
+   If `getopt' finds another option character, it returns that character,
+   updating `optind' and `nextchar' so that the next call to `getopt' can
+   resume the scan with the following option character or ARGV-element.
+
+   If there are no more option characters, `getopt' returns -1.
+   Then `optind' is the index in ARGV of the first ARGV-element
+   that is not an option.  (The ARGV-elements have been permuted
+   so that those that are not options now come last.)
+
+   OPTSTRING is a string containing the legitimate option characters.
+   If an option character is seen that is not listed in OPTSTRING,
+   return '?' after printing an error message.  If you set `opterr' to
+   zero, the error message is suppressed but we still return '?'.
+
+   If a char in OPTSTRING is followed by a colon, that means it wants an arg,
+   so the following text in the same ARGV-element, or the text of the following
+   ARGV-element, is returned in `optarg'.  Two colons mean an option that
+   wants an optional arg; if there is text in the current ARGV-element,
+   it is returned in `optarg', otherwise `optarg' is set to zero.
+
+   If OPTSTRING starts with `-' or `+', it requests different methods of
+   handling the non-option ARGV-elements.
+   See the comments about RETURN_IN_ORDER and REQUIRE_ORDER, above.
+
+   Long-named options begin with `--' instead of `-'.
+   Their names may be abbreviated as long as the abbreviation is unique
+   or is an exact match for some defined option.  If they have an
+   argument, it follows the option name in the same ARGV-element, separated
+   from the option name by a `=', or else the in next ARGV-element.
+   When `getopt' finds a long-named option, it returns 0 if that option's
+   `flag' field is nonzero, the value of the option's `val' field
+   if the `flag' field is zero.
+
+   The elements of ARGV aren't really const, because we permute them.
+   But we pretend they're const in the prototype to be compatible
+   with other systems.
+
+   LONGOPTS is a vector of `struct option' terminated by an
+   element containing a name which is zero.
+
+   LONGIND returns the index in LONGOPT of the long-named option found.
+   It is only valid when a long-named option has been found by the most
+   recent call.
+
+   If LONG_ONLY is nonzero, '-' as well as '--' can introduce
+   long-named options.  */
+
+int
+_getopt_internal (argc, argv, optstring, longopts, longind, long_only)
+     int argc;
+     char *const *argv;
+     const char *optstring;
+     const struct option *longopts;
+     int *longind;
+     int long_only;
+{
+  optarg = NULL;
+
+  if (optind == 0 || !__getopt_initialized)
+    {
+      if (optind == 0)
+	optind = 1;	/* Don't scan ARGV[0], the program name.  */
+      optstring = _getopt_initialize (argc, argv, optstring);
+      __getopt_initialized = 1;
+    }
+
+  /* Test whether ARGV[optind] points to a non-option argument.
+     Either it does not have option syntax, or there is an environment flag
+     from the shell indicating it is not an option.  The later information
+     is only used when the used in the GNU libc.  */
+#ifdef _LIBC
+# define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0'	      \
+		      || (optind < nonoption_flags_len			      \
+			  && __getopt_nonoption_flags[optind] == '1'))
+#else
+# define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0')
+#endif
+
+  if (nextchar == NULL || *nextchar == '\0')
+    {
+      /* Advance to the next ARGV-element.  */
+
+      /* Give FIRST_NONOPT & LAST_NONOPT rational values if OPTIND has been
+	 moved back by the user (who may also have changed the arguments).  */
+      if (last_nonopt > optind)
+	last_nonopt = optind;
+      if (first_nonopt > optind)
+	first_nonopt = optind;
+
+      if (ordering == PERMUTE)
+	{
+	  /* If we have just processed some options following some non-options,
+	     exchange them so that the options come first.  */
+
+	  if (first_nonopt != last_nonopt && last_nonopt != optind)
+	    exchange ((char **) argv);
+	  else if (last_nonopt != optind)
+	    first_nonopt = optind;
+
+	  /* Skip any additional non-options
+	     and extend the range of non-options previously skipped.  */
+
+	  while (optind < argc && NONOPTION_P)
+	    optind++;
+	  last_nonopt = optind;
+	}
+
+      /* The special ARGV-element `--' means premature end of options.
+	 Skip it like a null option,
+	 then exchange with previous non-options as if it were an option,
+	 then skip everything else like a non-option.  */
+
+      if (optind != argc && !strcmp (argv[optind], "--"))
+	{
+	  optind++;
+
+	  if (first_nonopt != last_nonopt && last_nonopt != optind)
+	    exchange ((char **) argv);
+	  else if (first_nonopt == last_nonopt)
+	    first_nonopt = optind;
+	  last_nonopt = argc;
+
+	  optind = argc;
+	}
+
+      /* If we have done all the ARGV-elements, stop the scan
+	 and back over any non-options that we skipped and permuted.  */
+
+      if (optind == argc)
+	{
+	  /* Set the next-arg-index to point at the non-options
+	     that we previously skipped, so the caller will digest them.  */
+	  if (first_nonopt != last_nonopt)
+	    optind = first_nonopt;
+	  return -1;
+	}
+
+      /* If we have come to a non-option and did not permute it,
+	 either stop the scan or describe it to the caller and pass it by.  */
+
+      if (NONOPTION_P)
+	{
+	  if (ordering == REQUIRE_ORDER)
+	    return -1;
+	  optarg = argv[optind++];
+	  return 1;
+	}
+
+      /* We have found another option-ARGV-element.
+	 Skip the initial punctuation.  */
+
+      nextchar = (argv[optind] + 1
+		  + (longopts != NULL && argv[optind][1] == '-'));
+    }
+
+  /* Decode the current option-ARGV-element.  */
+
+  /* Check whether the ARGV-element is a long option.
+
+     If long_only and the ARGV-element has the form "-f", where f is
+     a valid short option, don't consider it an abbreviated form of
+     a long option that starts with f.  Otherwise there would be no
+     way to give the -f short option.
+
+     On the other hand, if there's a long option "fubar" and
+     the ARGV-element is "-fu", do consider that an abbreviation of
+     the long option, just like "--fu", and not "-f" with arg "u".
+
+     This distinction seems to be the most useful approach.  */
+
+  if (longopts != NULL
+      && (argv[optind][1] == '-'
+	  || (long_only && (argv[optind][2] || !my_index (optstring, argv[optind][1])))))
+    {
+      char *nameend;
+      const struct option *p;
+      const struct option *pfound = NULL;
+      int exact = 0;
+      int ambig = 0;
+      int indfound = -1;
+      int option_index;
+
+      for (nameend = nextchar; *nameend && *nameend != '='; nameend++)
+	/* Do nothing.  */ ;
+
+      /* Test all long options for either exact match
+	 or abbreviated matches.  */
+      for (p = longopts, option_index = 0; p->name; p++, option_index++)
+	if (!strncmp (p->name, nextchar, nameend - nextchar))
+	  {
+	    if ((unsigned int) (nameend - nextchar)
+		== (unsigned int) strlen (p->name))
+	      {
+		/* Exact match found.  */
+		pfound = p;
+		indfound = option_index;
+		exact = 1;
+		break;
+	      }
+	    else if (pfound == NULL)
+	      {
+		/* First nonexact match found.  */
+		pfound = p;
+		indfound = option_index;
+	      }
+	    else
+	      /* Second or later nonexact match found.  */
+	      ambig = 1;
+	  }
+
+      if (ambig && !exact)
+	{
+	  if (opterr)
+	    fprintf (stderr, _("%s: option `%s' is ambiguous\n"),
+		     argv[0], argv[optind]);
+	  nextchar += strlen (nextchar);
+	  optind++;
+	  optopt = 0;
+	  return '?';
+	}
+
+      if (pfound != NULL)
+	{
+	  option_index = indfound;
+	  optind++;
+	  if (*nameend)
+	    {
+	      /* Don't test has_arg with >, because some C compilers don't
+		 allow it to be used on enums.  */
+	      if (pfound->has_arg)
+		optarg = nameend + 1;
+	      else
+		{
+		  if (opterr)
+		    {
+		      if (argv[optind - 1][1] == '-')
+			/* --option */
+			fprintf (stderr,
+				 _("%s: option `--%s' doesn't allow an argument\n"),
+				 argv[0], pfound->name);
+		      else
+			/* +option or -option */
+			fprintf (stderr,
+				 _("%s: option `%c%s' doesn't allow an argument\n"),
+				 argv[0], argv[optind - 1][0], pfound->name);
+		    }
+
+		  nextchar += strlen (nextchar);
+
+		  optopt = pfound->val;
+		  return '?';
+		}
+	    }
+	  else if (pfound->has_arg == 1)
+	    {
+	      if (optind < argc)
+		optarg = argv[optind++];
+	      else
+		{
+		  if (opterr)
+		    fprintf (stderr,
+			   _("%s: option `%s' requires an argument\n"),
+			   argv[0], argv[optind - 1]);
+		  nextchar += strlen (nextchar);
+		  optopt = pfound->val;
+		  return optstring[0] == ':' ? ':' : '?';
+		}
+	    }
+	  nextchar += strlen (nextchar);
+	  if (longind != NULL)
+	    *longind = option_index;
+	  if (pfound->flag)
+	    {
+	      *(pfound->flag) = pfound->val;
+	      return 0;
+	    }
+	  return pfound->val;
+	}
+
+      /* Can't find it as a long option.  If this is not getopt_long_only,
+	 or the option starts with '--' or is not a valid short
+	 option, then it's an error.
+	 Otherwise interpret it as a short option.  */
+      if (!long_only || argv[optind][1] == '-'
+	  || my_index (optstring, *nextchar) == NULL)
+	{
+	  if (opterr)
+	    {
+	      if (argv[optind][1] == '-')
+		/* --option */
+		fprintf (stderr, _("%s: unrecognized option `--%s'\n"),
+			 argv[0], nextchar);
+	      else
+		/* +option or -option */
+		fprintf (stderr, _("%s: unrecognized option `%c%s'\n"),
+			 argv[0], argv[optind][0], nextchar);
+	    }
+	  nextchar = (char *) "";
+	  optind++;
+	  optopt = 0;
+	  return '?';
+	}
+    }
+
+  /* Look at and handle the next short option-character.  */
+
+  {
+    char c = *nextchar++;
+    char *temp = my_index (optstring, c);
+
+    /* Increment `optind' when we start to process its last character.  */
+    if (*nextchar == '\0')
+      ++optind;
+
+    if (temp == NULL || c == ':')
+      {
+	if (opterr)
+	  {
+	    if (posixly_correct)
+	      /* 1003.2 specifies the format of this message.  */
+	      fprintf (stderr, _("%s: illegal option -- %c\n"),
+		       argv[0], c);
+	    else
+	      fprintf (stderr, _("%s: invalid option -- %c\n"),
+		       argv[0], c);
+	  }
+	optopt = c;
+	return '?';
+      }
+    /* Convenience. Treat POSIX -W foo same as long option --foo */
+    if (temp[0] == 'W' && temp[1] == ';')
+      {
+	char *nameend;
+	const struct option *p;
+	const struct option *pfound = NULL;
+	int exact = 0;
+	int ambig = 0;
+	int indfound = 0;
+	int option_index;
+
+	/* This is an option that requires an argument.  */
+	if (*nextchar != '\0')
+	  {
+	    optarg = nextchar;
+	    /* If we end this ARGV-element by taking the rest as an arg,
+	       we must advance to the next element now.  */
+	    optind++;
+	  }
+	else if (optind == argc)
+	  {
+	    if (opterr)
+	      {
+		/* 1003.2 specifies the format of this message.  */
+		fprintf (stderr, _("%s: option requires an argument -- %c\n"),
+			 argv[0], c);
+	      }
+	    optopt = c;
+	    if (optstring[0] == ':')
+	      c = ':';
+	    else
+	      c = '?';
+	    return c;
+	  }
+	else
+	  /* We already incremented `optind' once;
+	     increment it again when taking next ARGV-elt as argument.  */
+	  optarg = argv[optind++];
+
+	/* optarg is now the argument, see if it's in the
+	   table of longopts.  */
+
+	for (nextchar = nameend = optarg; *nameend && *nameend != '='; nameend++)
+	  /* Do nothing.  */ ;
+
+	/* Test all long options for either exact match
+	   or abbreviated matches.  */
+	for (p = longopts, option_index = 0; p->name; p++, option_index++)
+	  if (!strncmp (p->name, nextchar, nameend - nextchar))
+	    {
+	      if ((unsigned int) (nameend - nextchar) == strlen (p->name))
+		{
+		  /* Exact match found.  */
+		  pfound = p;
+		  indfound = option_index;
+		  exact = 1;
+		  break;
+		}
+	      else if (pfound == NULL)
+		{
+		  /* First nonexact match found.  */
+		  pfound = p;
+		  indfound = option_index;
+		}
+	      else
+		/* Second or later nonexact match found.  */
+		ambig = 1;
+	    }
+	if (ambig && !exact)
+	  {
+	    if (opterr)
+	      fprintf (stderr, _("%s: option `-W %s' is ambiguous\n"),
+		       argv[0], argv[optind]);
+	    nextchar += strlen (nextchar);
+	    optind++;
+	    return '?';
+	  }
+	if (pfound != NULL)
+	  {
+	    option_index = indfound;
+	    if (*nameend)
+	      {
+		/* Don't test has_arg with >, because some C compilers don't
+		   allow it to be used on enums.  */
+		if (pfound->has_arg)
+		  optarg = nameend + 1;
+		else
+		  {
+		    if (opterr)
+		      fprintf (stderr, _("\
+%s: option `-W %s' doesn't allow an argument\n"),
+			       argv[0], pfound->name);
+
+		    nextchar += strlen (nextchar);
+		    return '?';
+		  }
+	      }
+	    else if (pfound->has_arg == 1)
+	      {
+		if (optind < argc)
+		  optarg = argv[optind++];
+		else
+		  {
+		    if (opterr)
+		      fprintf (stderr,
+			       _("%s: option `%s' requires an argument\n"),
+			       argv[0], argv[optind - 1]);
+		    nextchar += strlen (nextchar);
+		    return optstring[0] == ':' ? ':' : '?';
+		  }
+	      }
+	    nextchar += strlen (nextchar);
+	    if (longind != NULL)
+	      *longind = option_index;
+	    if (pfound->flag)
+	      {
+		*(pfound->flag) = pfound->val;
+		return 0;
+	      }
+	    return pfound->val;
+	  }
+	  nextchar = NULL;
+	  return 'W';	/* Let the application handle it.   */
+      }
+    if (temp[1] == ':')
+      {
+	if (temp[2] == ':')
+	  {
+	    /* This is an option that accepts an argument optionally.  */
+	    if (*nextchar != '\0')
+	      {
+		optarg = nextchar;
+		optind++;
+	      }
+	    else
+	      optarg = NULL;
+	    nextchar = NULL;
+	  }
+	else
+	  {
+	    /* This is an option that requires an argument.  */
+	    if (*nextchar != '\0')
+	      {
+		optarg = nextchar;
+		/* If we end this ARGV-element by taking the rest as an arg,
+		   we must advance to the next element now.  */
+		optind++;
+	      }
+	    else if (optind == argc)
+	      {
+		if (opterr)
+		  {
+		    /* 1003.2 specifies the format of this message.  */
+		    fprintf (stderr,
+			   _("%s: option requires an argument -- %c\n"),
+			   argv[0], c);
+		  }
+		optopt = c;
+		if (optstring[0] == ':')
+		  c = ':';
+		else
+		  c = '?';
+	      }
+	    else
+	      /* We already incremented `optind' once;
+		 increment it again when taking next ARGV-elt as argument.  */
+	      optarg = argv[optind++];
+	    nextchar = NULL;
+	  }
+      }
+    return c;
+  }
+}
+
+int
+getopt (argc, argv, optstring)
+     int argc;
+     char *const *argv;
+     const char *optstring;
+{
+  return _getopt_internal (argc, argv, optstring,
+			   (const struct option *) 0,
+			   (int *) 0,
+			   0);
+}
+
+#endif	/* Not ELIDE_CODE.  */
+
+#ifdef TEST
+
+/* Compile with -DTEST to make an executable for use in testing
+   the above definition of `getopt'.  */
+
+int
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  int c;
+  int digit_optind = 0;
+
+  while (1)
+    {
+      int this_option_optind = optind ? optind : 1;
+
+      c = getopt (argc, argv, "abc:d:0123456789");
+      if (c == -1)
+	break;
+
+      switch (c)
+	{
+	case '0':
+	case '1':
+	case '2':
+	case '3':
+	case '4':
+	case '5':
+	case '6':
+	case '7':
+	case '8':
+	case '9':
+	  if (digit_optind != 0 && digit_optind != this_option_optind)
+	    printf ("digits occur in two different argv-elements.\n");
+	  digit_optind = this_option_optind;
+	  printf ("option %c\n", c);
+	  break;
+
+	case 'a':
+	  printf ("option a\n");
+	  break;
+
+	case 'b':
+	  printf ("option b\n");
+	  break;
+
+	case 'c':
+	  printf ("option c with value `%s'\n", optarg);
+	  break;
+
+	case '?':
+	  break;
+
+	default:
+	  printf ("?? getopt returned character code 0%o ??\n", c);
+	}
+    }
+
+  if (optind < argc)
+    {
+      printf ("non-option ARGV-elements: ");
+      while (optind < argc)
+	printf ("%s ", argv[optind++]);
+      printf ("\n");
+    }
+
+  exit (0);
+}
+
+#endif /* TEST */

Added: freeswitch/trunk/libs/speex/src/getopt1.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/src/getopt1.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,188 @@
+/* getopt_long and getopt_long_only entry points for GNU getopt.
+   Copyright (C) 1987,88,89,90,91,92,93,94,96,97,98
+     Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "getopt_win.h"
+
+#if !defined __STDC__ || !__STDC__
+/* This is a separate conditional since some stdc systems
+   reject `defined (const)'.  */
+#ifndef const
+#define const
+#endif
+#endif
+
+#include <stdio.h>
+
+/* Comment out all this code if we are using the GNU C Library, and are not
+   actually compiling the library itself.  This code is part of the GNU C
+   Library, but also included in many other GNU distributions.  Compiling
+   and linking in this code is a waste when using the GNU C library
+   (especially if it is a shared library).  Rather than having every GNU
+   program understand `configure --with-gnu-libc' and omit the object files,
+   it is simpler to just do this in the source for each such file.  */
+
+#define GETOPT_INTERFACE_VERSION 2
+#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2
+#include <gnu-versions.h>
+#if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION
+#define ELIDE_CODE
+#endif
+#endif
+
+#ifndef ELIDE_CODE
+
+
+/* This needs to come after some library #include
+   to get __GNU_LIBRARY__ defined.  */
+#ifdef __GNU_LIBRARY__
+#include <stdlib.h>
+#endif
+
+#ifndef	NULL
+#define NULL 0
+#endif
+
+int
+getopt_long (argc, argv, options, long_options, opt_index)
+     int argc;
+     char *const *argv;
+     const char *options;
+     const struct option *long_options;
+     int *opt_index;
+{
+  return _getopt_internal (argc, argv, options, long_options, opt_index, 0);
+}
+
+/* Like getopt_long, but '-' as well as '--' can indicate a long option.
+   If an option that starts with '-' (not '--') doesn't match a long option,
+   but does match a short option, it is parsed as a short option
+   instead.  */
+
+int
+getopt_long_only (argc, argv, options, long_options, opt_index)
+     int argc;
+     char *const *argv;
+     const char *options;
+     const struct option *long_options;
+     int *opt_index;
+{
+  return _getopt_internal (argc, argv, options, long_options, opt_index, 1);
+}
+
+
+#endif	/* Not ELIDE_CODE.  */
+
+#ifdef TEST
+
+#include <stdio.h>
+
+int
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  int c;
+  int digit_optind = 0;
+
+  while (1)
+    {
+      int this_option_optind = optind ? optind : 1;
+      int option_index = 0;
+      static struct option long_options[] =
+      {
+	{"add", 1, 0, 0},
+	{"append", 0, 0, 0},
+	{"delete", 1, 0, 0},
+	{"verbose", 0, 0, 0},
+	{"create", 0, 0, 0},
+	{"file", 1, 0, 0},
+	{0, 0, 0, 0}
+      };
+
+      c = getopt_long (argc, argv, "abc:d:0123456789",
+		       long_options, &option_index);
+      if (c == -1)
+	break;
+
+      switch (c)
+	{
+	case 0:
+	  printf ("option %s", long_options[option_index].name);
+	  if (optarg)
+	    printf (" with arg %s", optarg);
+	  printf ("\n");
+	  break;
+
+	case '0':
+	case '1':
+	case '2':
+	case '3':
+	case '4':
+	case '5':
+	case '6':
+	case '7':
+	case '8':
+	case '9':
+	  if (digit_optind != 0 && digit_optind != this_option_optind)
+	    printf ("digits occur in two different argv-elements.\n");
+	  digit_optind = this_option_optind;
+	  printf ("option %c\n", c);
+	  break;
+
+	case 'a':
+	  printf ("option a\n");
+	  break;
+
+	case 'b':
+	  printf ("option b\n");
+	  break;
+
+	case 'c':
+	  printf ("option c with value `%s'\n", optarg);
+	  break;
+
+	case 'd':
+	  printf ("option d with value `%s'\n", optarg);
+	  break;
+
+	case '?':
+	  break;
+
+	default:
+	  printf ("?? getopt returned character code 0%o ??\n", c);
+	}
+    }
+
+  if (optind < argc)
+    {
+      printf ("non-option ARGV-elements: ");
+      while (optind < argc)
+	printf ("%s ", argv[optind++]);
+      printf ("\n");
+    }
+
+  exit (0);
+}
+
+#endif /* TEST */

Added: freeswitch/trunk/libs/speex/src/getopt_win.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/src/getopt_win.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,169 @@
+/* Declarations for getopt.
+   Copyright (C) 1989,90,91,92,93,94,96,97,98 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef _GETOPT_H
+
+#ifndef __need_getopt
+# define _GETOPT_H 1
+#endif
+
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+/* For communication from `getopt' to the caller.
+   When `getopt' finds an option that takes an argument,
+   the argument value is returned here.
+   Also, when `ordering' is RETURN_IN_ORDER,
+   each non-option ARGV-element is returned here.  */
+
+extern char *optarg;
+
+/* Index in ARGV of the next element to be scanned.
+   This is used for communication to and from the caller
+   and for communication between successive calls to `getopt'.
+
+   On entry to `getopt', zero means this is the first call; initialize.
+
+   When `getopt' returns -1, this is the index of the first of the
+   non-option elements that the caller should itself scan.
+
+   Otherwise, `optind' communicates from one call to the next
+   how much of ARGV has been scanned so far.  */
+
+extern int optind;
+
+/* Callers store zero here to inhibit the error message `getopt' prints
+   for unrecognized options.  */
+
+extern int opterr;
+
+/* Set to an option character which was unrecognized.  */
+
+extern int optopt;
+
+#ifndef __need_getopt
+/* Describe the long-named options requested by the application.
+   The LONG_OPTIONS argument to getopt_long or getopt_long_only is a vector
+   of `struct option' terminated by an element containing a name which is
+   zero.
+
+   The field `has_arg' is:
+   no_argument		(or 0) if the option does not take an argument,
+   required_argument	(or 1) if the option requires an argument,
+   optional_argument 	(or 2) if the option takes an optional argument.
+
+   If the field `flag' is not NULL, it points to a variable that is set
+   to the value given in the field `val' when the option is found, but
+   left unchanged if the option is not found.
+
+   To have a long-named option do something other than set an `int' to
+   a compiled-in constant, such as set a value from `optarg', set the
+   option's `flag' field to zero and its `val' field to a nonzero
+   value (the equivalent single-letter option character, if there is
+   one).  For long options that have a zero `flag' field, `getopt'
+   returns the contents of the `val' field.  */
+
+struct option
+{
+# if defined __STDC__ && __STDC__
+  const char *name;
+# else
+  char *name;
+# endif
+  /* has_arg can't be an enum because some compilers complain about
+     type mismatches in all the code that assumes it is an int.  */
+  int has_arg;
+  int *flag;
+  int val;
+};
+
+/* Names for the values of the `has_arg' field of `struct option'.  */
+
+# define no_argument		0
+# define required_argument	1
+# define optional_argument	2
+#endif	/* need getopt */
+
+
+/* Get definitions and prototypes for functions to process the
+   arguments in ARGV (ARGC of them, minus the program name) for
+   options given in OPTS.
+
+   Return the option character from OPTS just read.  Return -1 when
+   there are no more options.  For unrecognized options, or options
+   missing arguments, `optopt' is set to the option letter, and '?' is
+   returned.
+
+   The OPTS string is a list of characters which are recognized option
+   letters, optionally followed by colons, specifying that that letter
+   takes an argument, to be placed in `optarg'.
+
+   If a letter in OPTS is followed by two colons, its argument is
+   optional.  This behavior is specific to the GNU `getopt'.
+
+   The argument `--' causes premature termination of argument
+   scanning, explicitly telling `getopt' that there are no more
+   options.
+
+   If OPTS begins with `--', then non-option arguments are treated as
+   arguments to the option '\0'.  This behavior is specific to the GNU
+   `getopt'.  */
+
+#if defined __STDC__ && __STDC__
+# ifdef __GNU_LIBRARY__
+/* Many other libraries have conflicting prototypes for getopt, with
+   differences in the consts, in stdlib.h.  To avoid compilation
+   errors, only prototype getopt for the GNU C library.  */
+extern int getopt (int __argc, char *const *__argv, const char *__shortopts);
+# else /* not __GNU_LIBRARY__ */
+extern int getopt ();
+# endif /* __GNU_LIBRARY__ */
+
+# ifndef __need_getopt
+extern int getopt_long (int __argc, char *const *__argv, const char *__shortopts,
+		        const struct option *__longopts, int *__longind);
+extern int getopt_long_only (int __argc, char *const *__argv,
+			     const char *__shortopts,
+		             const struct option *__longopts, int *__longind);
+
+/* Internal only.  Users should not call this directly.  */
+extern int _getopt_internal (int __argc, char *const *__argv,
+			     const char *__shortopts,
+		             const struct option *__longopts, int *__longind,
+			     int __long_only);
+# endif
+#else /* not __STDC__ */
+extern int getopt ();
+# ifndef __need_getopt
+extern int getopt_long ();
+extern int getopt_long_only ();
+
+extern int _getopt_internal ();
+# endif
+#endif /* __STDC__ */
+
+#ifdef	__cplusplus
+}
+#endif
+
+/* Make sure we later can get all the definitions and declarations.  */
+#undef __need_getopt
+
+#endif /* getopt.h */

Added: freeswitch/trunk/libs/speex/src/skeleton.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/src/skeleton.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,188 @@
+/*
+ * skeleton.c
+ * author: Tahseen Mohammad
+ */
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include <ogg/ogg.h>
+
+#include "skeleton.h"
+
+/* write an ogg_page to a file pointer */
+int write_ogg_page_to_file(ogg_page *og, FILE *out) {
+   int written;
+   
+   written = fwrite(og->header,1, og->header_len, out);
+   written += fwrite(og->body,1, og->body_len, out);
+
+   return written;
+}
+
+int add_message_header_field(fisbone_packet *fp, 
+                                        char *header_key, 
+                                        char *header_value) {
+
+    /* size of both key and value + ': ' + CRLF */
+    int this_message_size = strlen(header_key) + strlen(header_value) + 4;
+    if (fp->message_header_fields == NULL) {
+        fp->message_header_fields = _ogg_calloc(this_message_size, sizeof(char));
+    } else {
+        int new_size = (fp->current_header_size + this_message_size) * sizeof(char);
+        fp->message_header_fields = _ogg_realloc(fp->message_header_fields, new_size);
+    }
+    snprintf(fp->message_header_fields + fp->current_header_size, 
+                this_message_size+1, 
+                "%s: %s\r\n", 
+                header_key, 
+                header_value);
+    fp->current_header_size += this_message_size;
+
+    return 0;
+}
+
+/* create a ogg_packet from a fishead_packet structure */
+ogg_packet ogg_from_fishead(fishead_packet *fp) {
+
+    ogg_packet op;
+
+    memset(&op, 0, sizeof(op));
+    op.packet = _ogg_calloc(FISHEAD_SIZE, sizeof(unsigned char));
+    memset(op.packet, 0, FISHEAD_SIZE);
+
+    memcpy (op.packet, FISHEAD_IDENTIFIER, 8); /* identifier */
+    *((ogg_uint16_t*)(op.packet+8)) = SKELETON_VERSION_MAJOR; /* version major */
+    *((ogg_uint16_t*)(op.packet+10)) = SKELETON_VERSION_MINOR; /* version minor */
+    *((ogg_int64_t*)(op.packet+12)) = (ogg_int64_t)fp->ptime_n; /* presentationtime numerator */
+    *((ogg_int64_t*)(op.packet+20)) = (ogg_int64_t)fp->ptime_d; /* presentationtime denominator */
+    *((ogg_int64_t*)(op.packet+28)) = (ogg_int64_t)fp->btime_n; /* basetime numerator */
+    *((ogg_int64_t*)(op.packet+36)) = (ogg_int64_t)fp->btime_d; /* basetime denominator */
+    /* TODO: UTC time, set to zero for now */
+
+    op.b_o_s = 1;   /* its the first packet of the stream */
+    op.e_o_s = 0;   /* its not the last packet of the stream */
+    op.bytes = FISHEAD_SIZE;  /* length of the packet in bytes */
+
+    return op;
+}
+
+/* create a ogg_packet from a fisbone_packet structure. 
+ * call this method after the fisbone_packet is filled and all message header fields are added
+ * by calling add_message_header_field method.
+ */
+ogg_packet ogg_from_fisbone(fisbone_packet *fp) {
+    
+    ogg_packet op;
+    int packet_size = FISBONE_SIZE + fp->current_header_size;
+
+    memset (&op, 0, sizeof (op));       
+    op.packet = _ogg_calloc (packet_size, sizeof(unsigned char));
+    memset (op.packet, 0, packet_size);
+    memcpy (op.packet, FISBONE_IDENTIFIER, 8); /* identifier */
+    *((ogg_uint32_t*)(op.packet+8)) = FISBONE_MESSAGE_HEADER_OFFSET; /* offset of the message header fields */
+    *((ogg_uint32_t*)(op.packet+12)) = fp->serial_no; /* serialno of the respective stream */
+    *((ogg_uint32_t*)(op.packet+16)) = fp->nr_header_packet; /* number of header packets */
+    *((ogg_int64_t*)(op.packet+20)) = fp->granule_rate_n; /* granulrate numerator */
+    *((ogg_int64_t*)(op.packet+28)) = fp->granule_rate_d; /* granulrate denominator */
+    *((ogg_int64_t*)(op.packet+36)) = fp->start_granule; /* start granule */
+    *((ogg_uint32_t*)(op.packet+44)) = fp->preroll; /* preroll, for theora its 0 */
+    *(op.packet+48) = fp->granule_shift; /* granule shift */
+    memcpy((op.packet+FISBONE_SIZE), fp->message_header_fields, fp->current_header_size);
+
+    op.b_o_s = 0;
+    op.e_o_s = 0;
+    op.bytes = packet_size; /* size of the packet in bytes */
+
+    return op;
+}
+
+/* fills up a fishead_packet from a fishead ogg_packet of a skeleton bistream */
+fishead_packet fishead_from_ogg(ogg_packet *op) {
+	
+    fishead_packet fp;
+
+    if (memcmp(op->packet, FISHEAD_IDENTIFIER, 8))
+	; /* invalid packet what do we do? */
+
+    fp.version_major = *((ogg_uint16_t*)(op->packet+8)); /* version major */
+    fp.version_minor = *((ogg_uint16_t*)(op->packet+10)); /* version minor */
+    fp.ptime_n = *((ogg_int64_t*)(op->packet+12)); /* presentationtime numerator */
+    fp.ptime_d = *((ogg_int64_t*)(op->packet+20)); /* presentationtime denominator */
+    fp.btime_n = *((ogg_int64_t*)(op->packet+28)); /* basetime numerator */
+    fp.btime_d = *((ogg_int64_t*)(op->packet+36)); /* basetime denominator */
+    memcpy(fp.UTC, op->packet+44, 20);
+
+    return fp;
+}
+
+/* fills up a fisbone_packet from a fisbone ogg_packet of a skeleton bitstream */
+fisbone_packet fisbone_from_ogg(ogg_packet *op) {
+
+    fisbone_packet fp;
+    
+    if (memcmp(op->packet, FISBONE_IDENTIFIER, 8))
+	; /* invalid value, what do we do? */
+    fp.serial_no = *((ogg_uint32_t*)(op->packet+12)); /* serialno of the stream represented by this fisbone packet */
+    fp.nr_header_packet = *((ogg_uint32_t*)(op->packet+16)); /* number of header packets */
+    fp.granule_rate_n = *((ogg_int64_t*)(op->packet+20)); /* granulrate numerator */
+    fp.granule_rate_d = *((ogg_int64_t*)(op->packet+28)); /* granulrate denominator */
+    fp.start_granule = *((ogg_int64_t*)(op->packet+36)); /* start granule */
+    fp.preroll = *((ogg_uint32_t*)(op->packet+44)); /* preroll, for theora its 0 */
+    fp.granule_shift = *(op->packet+48); /* granule shift */
+    fp.current_header_size = op->bytes - FISBONE_SIZE;
+    fp.message_header_fields = _ogg_calloc(fp.current_header_size+1, sizeof(char));
+    memcpy(fp.message_header_fields, op->packet+FISBONE_SIZE, fp.current_header_size);
+
+    return fp;
+}
+
+int add_fishead_to_stream(ogg_stream_state *os, fishead_packet *fp) {
+
+    ogg_packet op;
+
+    op = ogg_from_fishead(fp);
+    ogg_stream_packetin(os, &op);
+    _ogg_free(op.packet);
+
+    return 0;
+}
+
+int add_fisbone_to_stream(ogg_stream_state *os, fisbone_packet *fp) {
+
+    ogg_packet op;
+
+    op = ogg_from_fisbone(fp);
+    ogg_stream_packetin(os, &op);
+    _ogg_free(op.packet);
+
+    return 0;
+}
+
+int add_eos_packet_to_stream(ogg_stream_state *os) {
+
+    ogg_packet op;
+
+    memset (&op, 0, sizeof(op));
+    op.e_o_s = 1;
+    ogg_stream_packetin(os, &op);
+
+    return 0;
+}
+
+int flush_ogg_stream_to_file(ogg_stream_state *os, FILE *out) {
+
+    ogg_page og;
+    int result;
+
+    while((result = ogg_stream_flush(os, &og)))
+    {
+        if(!result) break;
+        result = write_ogg_page_to_file(&og, out);
+        if(result != og.header_len + og.body_len)
+            return 1;
+    }
+
+    return 0;
+}

Added: freeswitch/trunk/libs/speex/src/skeleton.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/src/skeleton.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,78 @@
+/*
+ * skeleton.h
+ * author: Tahseen Mohammad
+ */
+
+#ifndef _SKELETON_H
+#define _SKELETON_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef WIN32
+#define snprintf _snprintf
+#endif
+
+#include <ogg/ogg.h>
+
+#define SKELETON_VERSION_MAJOR 3
+#define SKELETON_VERSION_MINOR 0
+#define FISHEAD_IDENTIFIER "fishead\0"
+#define FISBONE_IDENTIFIER "fisbone\0"
+#define FISHEAD_SIZE 64
+#define FISBONE_SIZE 52
+#define FISBONE_MESSAGE_HEADER_OFFSET 44
+
+/* fishead_packet holds a fishead header packet. */
+typedef struct {
+    ogg_uint16_t version_major;				    /* skeleton version major */
+    ogg_uint16_t version_minor;				    /* skeleton version minor */
+    /* Start time of the presentation
+     * For a new stream presentationtime & basetime is same. */
+    ogg_int64_t ptime_n;                                    /* presentation time numerator */
+    ogg_int64_t ptime_d;                                    /* presentation time denominator */
+    ogg_int64_t btime_n;                                    /* basetime numerator */
+    ogg_int64_t btime_d;                                    /* basetime denominator */
+    /* will holds the time of origin of the stream, a 20 bit field. */
+    unsigned char UTC[20];
+} fishead_packet;
+
+/* fisbone_packet holds a fisbone header packet. */
+typedef struct {
+    ogg_uint32_t serial_no;                                 /* serial no of the corresponding stream */
+    ogg_uint32_t nr_header_packet;                      /* number of header packets */
+    /* granule rate is the temporal resolution of the logical bitstream */
+    ogg_int64_t granule_rate_n;                            /* granule rate numerator */
+    ogg_int64_t granule_rate_d;                            /* granule rate denominator */
+    ogg_int64_t start_granule;                             /* start granule value */
+    ogg_uint32_t preroll;                                   /* preroll */
+    unsigned char granule_shift;		            /* 1 byte value holding the granule shift */
+    char *message_header_fields;                            /* holds all the message header fields */
+    /* current total size of the message header fields, for realloc purpose, initially zero */
+    ogg_uint32_t current_header_size;
+} fisbone_packet;
+
+extern int write_ogg_page_to_file(ogg_page *og, FILE *out);
+extern int add_message_header_field(fisbone_packet *fp, char *header_key, char *header_value);
+/* remember to deallocate the returned ogg_packet properly */
+extern ogg_packet ogg_from_fishead(fishead_packet *fp);
+extern ogg_packet ogg_from_fisbone(fisbone_packet *fp);
+extern fishead_packet fishead_from_ogg(ogg_packet *op);
+extern fisbone_packet fisbone_from_ogg(ogg_packet *op);
+extern int add_fishead_to_stream(ogg_stream_state *os, fishead_packet *fp);
+extern int add_fisbone_to_stream(ogg_stream_state *os, fisbone_packet *fp);
+extern int add_eos_packet_to_stream(ogg_stream_state *os);
+extern int flush_ogg_stream_to_file(ogg_stream_state *os, FILE *out);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* _SKELETON_H */
+
+
+
+
+
+

Added: freeswitch/trunk/libs/speex/src/speexdec.1
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/src/speexdec.1	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,78 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.29.
+.TH SPEEXDEC "1" "September 2003" "speexdec version 1.1" "User Commands"
+.SH NAME
+speexdec \- manual page for speexdec version 1.1
+.SH SYNOPSIS
+.B speexdec
+[\fIoptions\fR] \fIinput_file.spx \fR[\fIoutput_file\fR]
+.SH DESCRIPTION
+Decodes a Speex file and produce a WAV file or raw file
+.SS "input_file can be:"
+.TP
+filename.spx
+regular Speex file
+.TP
+-
+stdin
+.SS "output_file can be:"
+.TP
+filename.wav
+Wav file
+.TP
+filename.*
+Raw PCM file (any extension other that .wav)
+.TP
+-
+stdout
+.TP
+(nothing)
+Will be played to soundcard
+.SH OPTIONS
+.TP
+\fB\-\-enh\fR
+Enable perceptual enhancement (default)
+.TP
+\fB\-\-no\-enh\fR
+Disable perceptual enhancement
+.TP
+\fB\-\-force\-nb\fR
+Force decoding in narrowband
+.TP
+\fB\-\-force\-wb\fR
+Force decoding in wideband
+.TP
+\fB\-\-force\-uwb\fR
+Force decoding in ultra-wideband
+.TP
+\fB\-\-mono\fR
+Force decoding in mono
+.TP
+\fB\-\-stereo\fR
+Force decoding in stereo
+.TP
+\fB\-\-rate\fR n
+Force decoding at sampling rate n Hz
+.TP
+\fB\-\-packet\-loss\fR n
+Simulate n % random packet loss
+.TP
+\fB\-V\fR
+Verbose mode (show bit-rate)
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+This help
+.TP
+\fB\-v\fR, \fB\-\-version\fR
+Version information
+.TP
+\fB\-\-pf\fR
+Deprecated, use \fB\-\-enh\fR instead
+.TP
+\fB\-\-no\-pf\fR
+Deprecated, use \fB\-\-no\-enh\fR instead
+.PP
+More information is available from the Speex site: http://www.speex.org
+.PP
+Please report bugs to the mailing list `speex-dev at xiph.org'.
+.SH COPYRIGHT
+Copyright \(co 2002 Jean-Marc Valin

Added: freeswitch/trunk/libs/speex/src/speexdec.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/src/speexdec.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,796 @@
+/* Copyright (C) 2002-2006 Jean-Marc Valin 
+   File: speexdec.c
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+#include <stdio.h>
+#if !defined WIN32 && !defined _WIN32
+#include <unistd.h>
+#include <getopt.h>
+#endif
+#ifndef HAVE_GETOPT_LONG
+#include "getopt_win.h"
+#endif
+#include <stdlib.h>
+#include <string.h>
+
+#include <speex/speex.h>
+#include <ogg/ogg.h>
+
+#if defined WIN32 || defined _WIN32
+#include <windows.h>
+#include "getopt_win.h"
+#include "wave_out.h"
+/* We need the following two to set stdout to binary */
+#include <io.h>
+#include <fcntl.h>
+#endif
+#include <math.h>
+
+#ifdef __MINGW32__
+#include "wave_out.c"
+#endif
+
+#ifdef HAVE_SYS_SOUNDCARD_H
+#include <sys/soundcard.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <sys/ioctl.h>
+
+#elif defined HAVE_SYS_AUDIOIO_H
+#include <sys/types.h>
+#include <fcntl.h>
+#include <sys/ioctl.h>
+#include <sys/audioio.h>
+#ifndef AUDIO_ENCODING_SLINEAR
+#define AUDIO_ENCODING_SLINEAR AUDIO_ENCODING_LINEAR /* Solaris */
+#endif
+
+#endif
+
+#include <string.h>
+#include "wav_io.h"
+#include <speex/speex_header.h>
+#include <speex/speex_stereo.h>
+#include <speex/speex_callbacks.h>
+#include "wav_io.h"
+
+#define MAX_FRAME_SIZE 2000
+
+#define readint(buf, base) (((buf[base+3]<<24)&0xff000000)| \
+                           ((buf[base+2]<<16)&0xff0000)| \
+                           ((buf[base+1]<<8)&0xff00)| \
+  	           	    (buf[base]&0xff))
+
+static void print_comments(char *comments, int length)
+{
+   char *c=comments;
+   int len, i, nb_fields;
+   char *end;
+   
+   if (length<8)
+   {
+      fprintf (stderr, "Invalid/corrupted comments\n");
+      return;
+   }
+   end = c+length;
+   len=readint(c, 0);
+   c+=4;
+   if (c+len>end)
+   {
+      fprintf (stderr, "Invalid/corrupted comments\n");
+      return;
+   }
+   fwrite(c, 1, len, stderr);
+   c+=len;
+   fprintf (stderr, "\n");
+   if (c+4>end)
+   {
+      fprintf (stderr, "Invalid/corrupted comments\n");
+      return;
+   }
+   nb_fields=readint(c, 0);
+   c+=4;
+   for (i=0;i<nb_fields;i++)
+   {
+      if (c+4>end)
+      {
+         fprintf (stderr, "Invalid/corrupted comments\n");
+         return;
+      }
+      len=readint(c, 0);
+      c+=4;
+      if (c+len>end)
+      {
+         fprintf (stderr, "Invalid/corrupted comments\n");
+         return;
+      }
+      fwrite(c, 1, len, stderr);
+      c+=len;
+      fprintf (stderr, "\n");
+   }
+}
+
+FILE *out_file_open(char *outFile, int rate, int *channels)
+{
+   FILE *fout=NULL;
+   /*Open output file*/
+   if (strlen(outFile)==0)
+   {
+#if defined HAVE_SYS_SOUNDCARD_H
+      int audio_fd, format, stereo;
+      audio_fd=open("/dev/dsp", O_WRONLY);
+      if (audio_fd<0)
+      {
+         perror("Cannot open /dev/dsp");
+         exit(1);         
+      }
+
+      format=AFMT_S16_NE;
+      if (ioctl(audio_fd, SNDCTL_DSP_SETFMT, &format)==-1)
+      {
+         perror("SNDCTL_DSP_SETFMT");
+         close(audio_fd);
+         exit(1);
+      }
+
+      stereo=0;
+      if (*channels==2)
+         stereo=1;
+      if (ioctl(audio_fd, SNDCTL_DSP_STEREO, &stereo)==-1)
+      {
+         perror("SNDCTL_DSP_STEREO");
+         close(audio_fd);
+         exit(1);
+      }
+      if (stereo!=0)
+      {
+         if (*channels==1)
+            fprintf (stderr, "Cannot set mono mode, will decode in stereo\n");
+         *channels=2;
+      }
+
+      if (ioctl(audio_fd, SNDCTL_DSP_SPEED, &rate)==-1)
+      {
+         perror("SNDCTL_DSP_SPEED");
+         close(audio_fd);
+         exit(1);
+      }
+      fout = fdopen(audio_fd, "w");
+#elif defined HAVE_SYS_AUDIOIO_H
+      audio_info_t info;
+      int audio_fd;
+      
+      audio_fd = open("/dev/audio", O_WRONLY);
+      if (audio_fd<0)
+      {
+         perror("Cannot open /dev/audio");
+         exit(1);
+      }
+
+      AUDIO_INITINFO(&info);
+#ifdef AUMODE_PLAY    /* NetBSD/OpenBSD */
+      info.mode = AUMODE_PLAY;
+#endif
+      info.play.encoding = AUDIO_ENCODING_SLINEAR;
+      info.play.precision = 16;
+      info.play.sample_rate = rate;
+      info.play.channels = *channels;
+      
+      if (ioctl(audio_fd, AUDIO_SETINFO, &info) < 0)
+      {
+         perror ("AUDIO_SETINFO");
+         exit(1);
+      }
+      fout = fdopen(audio_fd, "w");
+#elif defined WIN32 || defined _WIN32
+      {
+         unsigned int speex_channels = *channels;
+         if (Set_WIN_Params (INVALID_FILEDESC, rate, SAMPLE_SIZE, speex_channels))
+         {
+            fprintf (stderr, "Can't access %s\n", "WAVE OUT");
+            exit(1);
+         }
+      }
+#else
+      fprintf (stderr, "No soundcard support\n");
+      exit(1);
+#endif
+   } else {
+      if (strcmp(outFile,"-")==0)
+      {
+#if defined WIN32 || defined _WIN32
+         _setmode(_fileno(stdout), _O_BINARY);
+#endif
+         fout=stdout;
+      }
+      else 
+      {
+         fout = fopen(outFile, "wb");
+         if (!fout)
+         {
+            perror(outFile);
+            exit(1);
+         }
+         if (strcmp(outFile+strlen(outFile)-4,".wav")==0 || strcmp(outFile+strlen(outFile)-4,".WAV")==0)
+            write_wav_header(fout, rate, *channels, 0, 0);
+      }
+   }
+   return fout;
+}
+
+void usage()
+{
+   printf ("Usage: speexdec [options] input_file.spx [output_file]\n");
+   printf ("\n");
+   printf ("Decodes a Speex file and produce a WAV file or raw file\n");
+   printf ("\n");
+   printf ("input_file can be:\n");
+   printf ("  filename.spx         regular Speex file\n");
+   printf ("  -                    stdin\n");
+   printf ("\n");  
+   printf ("output_file can be:\n");
+   printf ("  filename.wav         Wav file\n");
+   printf ("  filename.*           Raw PCM file (any extension other that .wav)\n");
+   printf ("  -                    stdout\n");
+   printf ("  (nothing)            Will be played to soundcard\n");
+   printf ("\n");  
+   printf ("Options:\n");
+   printf (" --enh                 Enable perceptual enhancement (default)\n");
+   printf (" --no-enh              Disable perceptual enhancement\n");
+   printf (" --force-nb            Force decoding in narrowband\n");
+   printf (" --force-wb            Force decoding in wideband\n");
+   printf (" --force-uwb           Force decoding in ultra-wideband\n");
+   printf (" --mono                Force decoding in mono\n");
+   printf (" --stereo              Force decoding in stereo\n");
+   printf (" --rate n              Force decoding at sampling rate n Hz\n");
+   printf (" --packet-loss n       Simulate n %% random packet loss\n");
+   printf (" -V                    Verbose mode (show bit-rate)\n"); 
+   printf (" -h, --help            This help\n");
+   printf (" -v, --version         Version information\n");
+   printf (" --pf                  Deprecated, use --enh instead\n");
+   printf (" --no-pf               Deprecated, use --no-enh instead\n");
+   printf ("\n");
+   printf ("More information is available from the Speex site: http://www.speex.org\n");
+   printf ("\n");
+   printf ("Please report bugs to the mailing list `speex-dev at xiph.org'.\n");
+}
+
+void version()
+{
+   printf ("speexdec (Speex decoder) version " SPEEX_VERSION " (compiled " __DATE__ ")\n");
+   printf ("Copyright (C) 2002-2006 Jean-Marc Valin\n");
+}
+
+void version_short()
+{
+   printf ("speexdec version " SPEEX_VERSION "\n");
+   printf ("Copyright (C) 2002-2006 Jean-Marc Valin\n");
+}
+
+static void *process_header(ogg_packet *op, spx_int32_t enh_enabled, spx_int32_t *frame_size, int *granule_frame_size, spx_int32_t *rate, int *nframes, int forceMode, int *channels, SpeexStereoState *stereo, int *extra_headers, int quiet)
+{
+   void *st;
+   const SpeexMode *mode;
+   SpeexHeader *header;
+   int modeID;
+   SpeexCallback callback;
+      
+   header = speex_packet_to_header((char*)op->packet, op->bytes);
+   if (!header)
+   {
+      fprintf (stderr, "Cannot read header\n");
+      return NULL;
+   }
+   if (header->mode >= SPEEX_NB_MODES || header->mode<0)
+   {
+      fprintf (stderr, "Mode number %d does not (yet/any longer) exist in this version\n", 
+               header->mode);
+      return NULL;
+   }
+      
+   modeID = header->mode;
+   if (forceMode!=-1)
+      modeID = forceMode;
+
+   mode = speex_lib_get_mode (modeID);
+   
+   if (header->speex_version_id > 1)
+   {
+      fprintf (stderr, "This file was encoded with Speex bit-stream version %d, which I don't know how to decode\n", header->speex_version_id);
+      return NULL;
+   }
+
+   if (mode->bitstream_version < header->mode_bitstream_version)
+   {
+      fprintf (stderr, "The file was encoded with a newer version of Speex. You need to upgrade in order to play it.\n");
+      return NULL;
+   }
+   if (mode->bitstream_version > header->mode_bitstream_version) 
+   {
+      fprintf (stderr, "The file was encoded with an older version of Speex. You would need to downgrade the version in order to play it.\n");
+      return NULL;
+   }
+   
+   st = speex_decoder_init(mode);
+   if (!st)
+   {
+      fprintf (stderr, "Decoder initialization failed.\n");
+      return NULL;
+   }
+   speex_decoder_ctl(st, SPEEX_SET_ENH, &enh_enabled);
+   speex_decoder_ctl(st, SPEEX_GET_FRAME_SIZE, frame_size);
+   *granule_frame_size = *frame_size;
+
+   if (!(*channels==1))
+   {
+      callback.callback_id = SPEEX_INBAND_STEREO;
+      callback.func = speex_std_stereo_request_handler;
+      callback.data = stereo;
+      speex_decoder_ctl(st, SPEEX_SET_HANDLER, &callback);
+   }
+   if (!*rate)
+      *rate = header->rate;
+   /* Adjust rate if --force-* options are used */
+   if (forceMode!=-1)
+   {
+      if (header->mode < forceMode)
+      {
+         *rate <<= (forceMode - header->mode);
+         *granule_frame_size >>= (forceMode - header->mode);
+      }
+      if (header->mode > forceMode)
+      {
+         *rate >>= (header->mode - forceMode);
+         *granule_frame_size <<= (header->mode - forceMode);
+      }
+   }
+
+
+   speex_decoder_ctl(st, SPEEX_SET_SAMPLING_RATE, rate);
+
+   *nframes = header->frames_per_packet;
+
+   if (*channels==-1)
+      *channels = header->nb_channels;
+   
+   if (!quiet)
+   {
+      fprintf (stderr, "Decoding %d Hz audio using %s mode", 
+               *rate, mode->modeName);
+
+      if (*channels==1)
+         fprintf (stderr, " (mono");
+      else
+         fprintf (stderr, " (stereo");
+      
+      if (header->vbr)
+         fprintf (stderr, ", VBR)\n");
+      else
+         fprintf(stderr, ")\n");
+      /*fprintf (stderr, "Decoding %d Hz audio at %d bps using %s mode\n", 
+       *rate, mode->bitrate, mode->modeName);*/
+   }
+
+   *extra_headers = header->extra_headers;
+
+   free(header);
+   return st;
+}
+
+int main(int argc, char **argv)
+{
+   int c;
+   int option_index = 0;
+   char *inFile, *outFile;
+   FILE *fin, *fout=NULL;
+   short out[MAX_FRAME_SIZE];
+   short output[MAX_FRAME_SIZE];
+   int frame_size=0, granule_frame_size=0;
+   void *st=NULL;
+   SpeexBits bits;
+   int packet_count=0;
+   int stream_init = 0;
+   int quiet = 0;
+   ogg_int64_t page_granule=0, last_granule=0;
+   int skip_samples=0, page_nb_packets;
+   struct option long_options[] =
+   {
+      {"help", no_argument, NULL, 0},
+      {"quiet", no_argument, NULL, 0},
+      {"version", no_argument, NULL, 0},
+      {"version-short", no_argument, NULL, 0},
+      {"enh", no_argument, NULL, 0},
+      {"no-enh", no_argument, NULL, 0},
+      {"pf", no_argument, NULL, 0},
+      {"no-pf", no_argument, NULL, 0},
+      {"force-nb", no_argument, NULL, 0},
+      {"force-wb", no_argument, NULL, 0},
+      {"force-uwb", no_argument, NULL, 0},
+      {"rate", required_argument, NULL, 0},
+      {"mono", no_argument, NULL, 0},
+      {"stereo", no_argument, NULL, 0},
+      {"packet-loss", required_argument, NULL, 0},
+      {0, 0, 0, 0}
+   };
+   ogg_sync_state oy;
+   ogg_page       og;
+   ogg_packet     op;
+   ogg_stream_state os;
+   int enh_enabled;
+   int nframes=2;
+   int print_bitrate=0;
+   int close_in=0;
+   int eos=0;
+   int forceMode=-1;
+   int audio_size=0;
+   float loss_percent=-1;
+   SpeexStereoState stereo = SPEEX_STEREO_STATE_INIT;
+   int channels=-1;
+   int rate=0;
+   int extra_headers=0;
+   int wav_format=0;
+   int lookahead;
+   int speex_serialno = -1;
+
+   enh_enabled = 1;
+
+   /*Process options*/
+   while(1)
+   {
+      c = getopt_long (argc, argv, "hvV",
+                       long_options, &option_index);
+      if (c==-1)
+         break;
+      
+      switch(c)
+      {
+      case 0:
+         if (strcmp(long_options[option_index].name,"help")==0)
+         {
+            usage();
+            exit(0);
+         } else if (strcmp(long_options[option_index].name,"quiet")==0)
+         {
+            quiet = 1;
+         } else if (strcmp(long_options[option_index].name,"version")==0)
+         {
+            version();
+            exit(0);
+         } else if (strcmp(long_options[option_index].name,"version-short")==0)
+         {
+            version_short();
+            exit(0);
+         } else if (strcmp(long_options[option_index].name,"enh")==0)
+         {
+            enh_enabled=1;
+         } else if (strcmp(long_options[option_index].name,"no-enh")==0)
+         {
+            enh_enabled=0;
+         } else if (strcmp(long_options[option_index].name,"pf")==0)
+         {
+            fprintf (stderr, "--pf is deprecated, use --enh instead\n");
+            enh_enabled=1;
+         } else if (strcmp(long_options[option_index].name,"no-pf")==0)
+         {
+            fprintf (stderr, "--no-pf is deprecated, use --no-enh instead\n");
+            enh_enabled=0;
+         } else if (strcmp(long_options[option_index].name,"force-nb")==0)
+         {
+            forceMode=0;
+         } else if (strcmp(long_options[option_index].name,"force-wb")==0)
+         {
+            forceMode=1;
+         } else if (strcmp(long_options[option_index].name,"force-uwb")==0)
+         {
+            forceMode=2;
+         } else if (strcmp(long_options[option_index].name,"mono")==0)
+         {
+            channels=1;
+         } else if (strcmp(long_options[option_index].name,"stereo")==0)
+         {
+            channels=2;
+         } else if (strcmp(long_options[option_index].name,"rate")==0)
+         {
+            rate=atoi (optarg);
+         } else if (strcmp(long_options[option_index].name,"packet-loss")==0)
+         {
+            loss_percent = atof(optarg);
+         }
+         break;
+      case 'h':
+         usage();
+         exit(0);
+         break;
+      case 'v':
+         version();
+         exit(0);
+         break;
+      case 'V':
+         print_bitrate=1;
+         break;
+      case '?':
+         usage();
+         exit(1);
+         break;
+      }
+   }
+   if (argc-optind!=2 && argc-optind!=1)
+   {
+      usage();
+      exit(1);
+   }
+   inFile=argv[optind];
+
+   if (argc-optind==2)
+      outFile=argv[optind+1];
+   else
+      outFile = "";
+   wav_format = strlen(outFile)>=4 && (
+                                       strcmp(outFile+strlen(outFile)-4,".wav")==0
+                                       || strcmp(outFile+strlen(outFile)-4,".WAV")==0);
+   /*Open input file*/
+   if (strcmp(inFile, "-")==0)
+   {
+#if defined WIN32 || defined _WIN32
+      _setmode(_fileno(stdin), _O_BINARY);
+#endif
+      fin=stdin;
+   }
+   else 
+   {
+      fin = fopen(inFile, "rb");
+      if (!fin)
+      {
+         perror(inFile);
+         exit(1);
+      }
+      close_in=1;
+   }
+
+
+   /*Init Ogg data struct*/
+   ogg_sync_init(&oy);
+   
+   speex_bits_init(&bits);
+   /*Main decoding loop*/
+   
+   while (1)
+   {
+      char *data;
+      int i, j, nb_read;
+      /*Get the ogg buffer for writing*/
+      data = ogg_sync_buffer(&oy, 200);
+      /*Read bitstream from input file*/
+      nb_read = fread(data, sizeof(char), 200, fin);      
+      ogg_sync_wrote(&oy, nb_read);
+
+      /*Loop for all complete pages we got (most likely only one)*/
+      while (ogg_sync_pageout(&oy, &og)==1)
+      {
+         int packet_no;
+         if (stream_init == 0) {
+            ogg_stream_init(&os, ogg_page_serialno(&og));
+            stream_init = 1;
+         }
+	 if (ogg_page_serialno(&og) != os.serialno) {
+	    /* so all streams are read. */
+	    ogg_stream_reset_serialno(&os, ogg_page_serialno(&og));
+	 }
+         /*Add page to the bitstream*/
+         ogg_stream_pagein(&os, &og);
+         page_granule = ogg_page_granulepos(&og);
+         page_nb_packets = ogg_page_packets(&og);
+         if (page_granule>0 && frame_size)
+         {
+            /* FIXME: shift the granule values if --force-* is specified */
+            skip_samples = frame_size*(page_nb_packets*granule_frame_size*nframes - (page_granule-last_granule))/granule_frame_size;
+            if (ogg_page_eos(&og))
+               skip_samples = -skip_samples;
+            /*else if (!ogg_page_bos(&og))
+               skip_samples = 0;*/
+         } else
+         {
+            skip_samples = 0;
+         }
+         /*printf ("page granulepos: %d %d %d\n", skip_samples, page_nb_packets, (int)page_granule);*/
+         last_granule = page_granule;
+         /*Extract all available packets*/
+         packet_no=0;
+         while (!eos && ogg_stream_packetout(&os, &op) == 1)
+         {
+	    if (!memcmp(op.packet, "Speex", 5)) {
+	       speex_serialno = os.serialno;
+	    }
+	    if (speex_serialno == -1 || os.serialno != speex_serialno)
+	       break;
+            /*If first packet, process as Speex header*/
+            if (packet_count==0)
+            {
+               st = process_header(&op, enh_enabled, &frame_size, &granule_frame_size, &rate, &nframes, forceMode, &channels, &stereo, &extra_headers, quiet);
+               if (!st)
+                  exit(1);
+               speex_decoder_ctl(st, SPEEX_GET_LOOKAHEAD, &lookahead);
+               if (!nframes)
+                  nframes=1;
+               fout = out_file_open(outFile, rate, &channels);
+
+            } else if (packet_count==1)
+            {
+               if (!quiet)
+                  print_comments((char*)op.packet, op.bytes);
+            } else if (packet_count<=1+extra_headers)
+            {
+               /* Ignore extra headers */
+            } else {
+               int lost=0;
+               packet_no++;
+               if (loss_percent>0 && 100*((float)rand())/RAND_MAX<loss_percent)
+                  lost=1;
+
+               /*End of stream condition*/
+               if (op.e_o_s && os.serialno == speex_serialno) /* don't care for anything except speex eos */
+                  eos=1;
+	       
+               /*Copy Ogg packet to Speex bitstream*/
+               speex_bits_read_from(&bits, (char*)op.packet, op.bytes);
+               for (j=0;j!=nframes;j++)
+               {
+                  int ret;
+                  /*Decode frame*/
+                  if (!lost)
+                     ret = speex_decode_int(st, &bits, output);
+                  else
+                     ret = speex_decode_int(st, NULL, output);
+
+                  /*for (i=0;i<frame_size*channels;i++)
+                    printf ("%d\n", (int)output[i]);*/
+
+                  if (ret==-1)
+                     break;
+                  if (ret==-2)
+                  {
+                     fprintf (stderr, "Decoding error: corrupted stream?\n");
+                     break;
+                  }
+                  if (speex_bits_remaining(&bits)<0)
+                  {
+                     fprintf (stderr, "Decoding overflow: corrupted stream?\n");
+                     break;
+                  }
+                  if (channels==2)
+                     speex_decode_stereo_int(output, frame_size, &stereo);
+
+                  if (print_bitrate) {
+                     spx_int32_t tmp;
+                     char ch=13;
+                     speex_decoder_ctl(st, SPEEX_GET_BITRATE, &tmp);
+                     fputc (ch, stderr);
+                     fprintf (stderr, "Bitrate is use: %d bps     ", tmp);
+                  }
+                  /*Convert to short and save to output file*/
+		  if (strlen(outFile)!=0)
+                  {
+                     for (i=0;i<frame_size*channels;i++)
+                        out[i]=le_short(output[i]);
+		  } else {
+                     for (i=0;i<frame_size*channels;i++)
+                        out[i]=output[i];
+		  }
+                  {
+                     int frame_offset = 0;
+                     int new_frame_size = frame_size;
+                     /*printf ("packet %d %d\n", packet_no, skip_samples);*/
+                     /*fprintf (stderr, "packet %d %d %d\n", packet_no, skip_samples, lookahead);*/
+                     if (packet_no == 1 && j==0 && skip_samples > 0)
+                     {
+                        /*printf ("chopping first packet\n");*/
+                        new_frame_size -= skip_samples+lookahead;
+                        frame_offset = skip_samples+lookahead;
+                     }
+                     if (packet_no == page_nb_packets && skip_samples < 0)
+                     {
+                        int packet_length = nframes*frame_size+skip_samples+lookahead;
+                        new_frame_size = packet_length - j*frame_size;
+                        if (new_frame_size<0)
+                           new_frame_size = 0;
+                        if (new_frame_size>frame_size)
+                           new_frame_size = frame_size;
+                        /*printf ("chopping end: %d %d %d\n", new_frame_size, packet_length, packet_no);*/
+                     }
+                     if (new_frame_size>0)
+                     {  
+#if defined WIN32 || defined _WIN32
+                        if (strlen(outFile)==0)
+                           WIN_Play_Samples (out+frame_offset*channels, sizeof(short) * new_frame_size*channels);
+                        else
+#endif
+                           fwrite(out+frame_offset*channels, sizeof(short), new_frame_size*channels, fout);
+                  
+                        audio_size+=sizeof(short)*new_frame_size*channels;
+                     }
+                  }
+               }
+            }
+            packet_count++;
+         }
+      }
+      if (feof(fin))
+         break;
+
+   }
+
+   if (fout && wav_format)
+   {
+      if (fseek(fout,4,SEEK_SET)==0)
+      {
+         int tmp;
+         tmp = le_int(audio_size+36);
+         fwrite(&tmp,4,1,fout);
+         if (fseek(fout,32,SEEK_CUR)==0)
+         {
+            tmp = le_int(audio_size);
+            fwrite(&tmp,4,1,fout);
+         } else
+         {
+            fprintf (stderr, "First seek worked, second didn't\n");
+         }
+      } else {
+         fprintf (stderr, "Cannot seek on wave file, size will be incorrect\n");
+      }
+   }
+
+   if (st)
+      speex_decoder_destroy(st);
+   else 
+   {
+      fprintf (stderr, "This doesn't look like a Speex file\n");
+   }
+   speex_bits_destroy(&bits);
+   if (stream_init)
+      ogg_stream_clear(&os);
+   ogg_sync_clear(&oy);
+
+#if defined WIN32 || defined _WIN32
+   if (strlen(outFile)==0)
+      WIN_Audio_close ();
+#endif
+
+   if (close_in)
+      fclose(fin);
+   if (fout != NULL)
+      fclose(fout);   
+
+   return 0;
+}

Added: freeswitch/trunk/libs/speex/src/speexenc.1
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/src/speexenc.1	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,105 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.29.
+.TH SPEEXENC "1" "September 2003" "speexenc version 1.1" "User Commands"
+.SH NAME
+speexenc \- manual page for speexenc version 1.1
+.SH SYNOPSIS
+.B speexenc
+[\fIoptions\fR] \fIinput_file output_file\fR
+.SH DESCRIPTION
+Encodes input_file using Speex. It can read the WAV or raw files.
+.SS "input_file can be:"
+.TP
+filename.wav
+wav file
+.TP
+filename.*
+Raw PCM file (any extension other than .wav)
+.TP
+-
+stdin
+.SS "output_file can be:"
+.TP
+filename.spx
+Speex file
+.TP
+-
+stdout
+.SH OPTIONS
+.TP
+\fB\-n\fR, \fB\-\-narrowband\fR
+Narrowband (8 kHz) input file
+.TP
+\fB\-w\fR, \fB\-\-wideband\fR
+Wideband (16 kHz) input file
+.HP
+\fB\-u\fR, \fB\-\-ultra\-wideband\fR "Ultra-wideband" (32 kHz) input file
+.TP
+\fB\-\-quality\fR n
+Encoding quality (0-10), default 8
+.TP
+\fB\-\-bitrate\fR n
+Encoding bit-rate (use bit-rate n or lower)
+.TP
+\fB\-\-vbr\fR
+Enable variable bit-rate (VBR)
+.TP
+\fB\-\-abr\fR rate
+Enable average bit-rate (ABR) at rate bps
+.TP
+\fB\-\-vad\fR
+Enable voice activity detection (VAD)
+.TP
+\fB\-\-dtx\fR
+Enable file-based discontinuous transmission (DTX)
+.TP
+\fB\-\-comp\fR n
+Set encoding complexity (0-10), default 3
+.TP
+\fB\-\-nframes\fR n
+Number of frames per Ogg packet (1-10), default 1
+.TP
+\fB\-\-comment\fR
+Add the given string as an extra comment. This may be
+used multiple times
+.TP
+\fB\-\-author\fR
+Author of this track
+.TP
+\fB\-\-title\fR
+Title for this track
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+This help
+.TP
+\fB\-v\fR, \fB\-\-version\fR
+Version information
+.TP
+\fB\-V\fR
+Verbose mode (show bit-rate)
+.SS "Raw input options:"
+.TP
+\fB\-\-rate\fR n
+Sampling rate for raw input
+.TP
+\fB\-\-stereo\fR
+Consider raw input as stereo
+.TP
+\fB\-\-le\fR
+Raw input is little-endian
+.TP
+\fB\-\-be\fR
+Raw input is big-endian
+.TP
+\fB\-\-8bit\fR
+Raw input is 8-bit unsigned
+.TP
+\fB\-\-16bit\fR
+Raw input is 16-bit signed
+.PP
+Default raw PCM input is 16-bit, little-endian, mono
+.PP
+More information is available from the Speex site: http://www.speex.org
+.PP
+Please report bugs to the mailing list `speex-dev at xiph.org'.
+.SH COPYRIGHT
+Copyright \(co 2002 Jean-Marc Valin

Added: freeswitch/trunk/libs/speex/src/speexenc.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/src/speexenc.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,981 @@
+/* Copyright (C) 2002-2006 Jean-Marc Valin 
+   File: speexenc.c
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+#include <stdio.h>
+#if !defined WIN32 && !defined _WIN32
+#include <unistd.h>
+#include <getopt.h>
+#endif
+#ifndef HAVE_GETOPT_LONG
+#include "getopt_win.h"
+#endif
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+
+#include <speex/speex.h>
+#include <ogg/ogg.h>
+#include "wav_io.h"
+#include <speex/speex_header.h>
+#include <speex/speex_stereo.h>
+#include <speex/speex_preprocess.h>
+
+#if defined WIN32 || defined _WIN32
+#include "getopt_win.h"
+/* We need the following two to set stdout to binary */
+#include <io.h>
+#include <fcntl.h>
+#endif
+
+#include "skeleton.h"
+
+
+void comment_init(char **comments, int* length, char *vendor_string);
+void comment_add(char **comments, int* length, char *tag, char *val);
+
+
+/*Write an Ogg page to a file pointer*/
+int oe_write_page(ogg_page *page, FILE *fp)
+{
+   int written;
+   written = fwrite(page->header,1,page->header_len, fp);
+   written += fwrite(page->body,1,page->body_len, fp);
+   
+   return written;
+}
+
+#define MAX_FRAME_SIZE 2000
+#define MAX_FRAME_BYTES 2000
+
+/* Convert input audio bits, endians and channels */
+static int read_samples(FILE *fin,int frame_size, int bits, int channels, int lsb, short * input, char *buff, spx_int32_t *size)
+{   
+   unsigned char in[MAX_FRAME_BYTES*2];
+   int i;
+   short *s;
+   int nb_read;
+
+   if (size && *size<=0)
+   {
+      return 0;
+   }
+   /*Read input audio*/
+   if (size)
+      *size -= bits/8*channels*frame_size;
+   if (buff)
+   {
+      for (i=0;i<12;i++)
+         in[i]=buff[i];
+      nb_read = fread(in+12,1,bits/8*channels*frame_size-12, fin) + 12;
+      if (size)
+         *size += 12;
+   } else {
+      nb_read = fread(in,1,bits/8*channels* frame_size, fin);
+   }
+   nb_read /= bits/8*channels;
+
+   /*fprintf (stderr, "%d\n", nb_read);*/
+   if (nb_read==0)
+      return 0;
+
+   s=(short*)in;
+   if(bits==8)
+   {
+      /* Convert 8->16 bits */
+      for(i=frame_size*channels-1;i>=0;i--)
+      {
+         s[i]=(in[i]<<8)^0x8000;
+      }
+   } else
+   {
+      /* convert to our endian format */
+      for(i=0;i<frame_size*channels;i++)
+      {
+         if(lsb) 
+            s[i]=le_short(s[i]); 
+         else
+            s[i]=be_short(s[i]);
+      }
+   }
+
+   /* FIXME: This is probably redundent now */
+   /* copy to float input buffer */
+   for (i=0;i<frame_size*channels;i++)
+   {
+      input[i]=(short)s[i];
+   }
+
+   for (i=nb_read*channels;i<frame_size*channels;i++)
+   {
+      input[i]=0;
+   }
+
+
+   return nb_read;
+}
+
+void add_fishead_packet (ogg_stream_state *os) {
+
+   fishead_packet fp;
+
+   memset(&fp, 0, sizeof(fp));
+   fp.ptime_n = 0;
+   fp.ptime_d = 1000;
+   fp.btime_n = 0;
+   fp.btime_d = 1000;
+
+   add_fishead_to_stream(os, &fp);
+}
+
+/*
+ * Adds the fishead packets in the skeleton output stream along with the e_o_s packet
+ */
+void add_fisbone_packet (ogg_stream_state *os, spx_int32_t serialno, SpeexHeader *header) {
+
+   fisbone_packet fp;
+
+   memset(&fp, 0, sizeof(fp));
+   fp.serial_no = serialno;
+   fp.nr_header_packet = 2 + header->extra_headers;
+   fp.granule_rate_n = header->rate;
+   fp.granule_rate_d = 1;
+   fp.start_granule = 0;
+   fp.preroll = 3;
+   fp.granule_shift = 0;
+
+   add_message_header_field(&fp, "Content-Type", "audio/x-speex");
+
+   add_fisbone_to_stream(os, &fp);
+}
+
+void version()
+{
+   printf ("speexenc (Speex encoder) version " SPEEX_VERSION " (compiled " __DATE__ ")\n");
+   printf ("Copyright (C) 2002-2006 Jean-Marc Valin\n");
+}
+
+void version_short()
+{
+   printf ("speexenc version " SPEEX_VERSION "\n");
+   printf ("Copyright (C) 2002-2006 Jean-Marc Valin\n");
+}
+
+void usage()
+{
+   printf ("Usage: speexenc [options] input_file output_file\n");
+   printf ("\n");
+   printf ("Encodes input_file using Speex. It can read the WAV or raw files.\n");
+   printf ("\n");
+   printf ("input_file can be:\n");
+   printf ("  filename.wav      wav file\n");
+   printf ("  filename.*        Raw PCM file (any extension other than .wav)\n");
+   printf ("  -                 stdin\n");
+   printf ("\n");  
+   printf ("output_file can be:\n");
+   printf ("  filename.spx      Speex file\n");
+   printf ("  -                 stdout\n");
+   printf ("\n");  
+   printf ("Options:\n");
+   printf (" -n, --narrowband   Narrowband (8 kHz) input file\n"); 
+   printf (" -w, --wideband     Wideband (16 kHz) input file\n"); 
+   printf (" -u, --ultra-wideband \"Ultra-wideband\" (32 kHz) input file\n"); 
+   printf (" --quality n        Encoding quality (0-10), default 8\n"); 
+   printf (" --bitrate n        Encoding bit-rate (use bit-rate n or lower)\n"); 
+   printf (" --vbr              Enable variable bit-rate (VBR)\n"); 
+   printf (" --vbr-max-bitrate  Set max VBR bit-rate allowed\n"); 
+   printf (" --abr rate         Enable average bit-rate (ABR) at rate bps\n"); 
+   printf (" --vad              Enable voice activity detection (VAD)\n"); 
+   printf (" --dtx              Enable file-based discontinuous transmission (DTX)\n"); 
+   printf (" --comp n           Set encoding complexity (0-10), default 3\n"); 
+   printf (" --nframes n        Number of frames per Ogg packet (1-10), default 1\n"); 
+   printf (" --denoise          Denoise the input before encoding\n"); 
+   printf (" --agc              Apply adaptive gain control (AGC) before encoding\n"); 
+   printf (" --skeleton         Outputs ogg skeleton metadata (may cause incompatibilities)\n");
+   printf (" --comment          Add the given string as an extra comment. This may be\n");
+   printf ("                     used multiple times\n");
+   printf (" --author           Author of this track\n");
+   printf (" --title            Title for this track\n");
+   printf (" -h, --help         This help\n"); 
+   printf (" -v, --version      Version information\n"); 
+   printf (" -V                 Verbose mode (show bit-rate)\n"); 
+   printf ("Raw input options:\n");
+   printf (" --rate n           Sampling rate for raw input\n"); 
+   printf (" --stereo           Consider raw input as stereo\n"); 
+   printf (" --le               Raw input is little-endian\n"); 
+   printf (" --be               Raw input is big-endian\n"); 
+   printf (" --8bit             Raw input is 8-bit unsigned\n"); 
+   printf (" --16bit            Raw input is 16-bit signed\n"); 
+   printf ("Default raw PCM input is 16-bit, little-endian, mono\n"); 
+   printf ("\n");
+   printf ("More information is available from the Speex site: http://www.speex.org\n");
+   printf ("\n");
+   printf ("Please report bugs to the mailing list `speex-dev at xiph.org'.\n");
+}
+
+
+int main(int argc, char **argv)
+{
+   int nb_samples, total_samples=0, nb_encoded;
+   int c;
+   int option_index = 0;
+   char *inFile, *outFile;
+   FILE *fin, *fout;
+   short input[MAX_FRAME_SIZE];
+   spx_int32_t frame_size;
+   int quiet=0;
+   spx_int32_t vbr_enabled=0;
+   spx_int32_t vbr_max=0;
+   int abr_enabled=0;
+   spx_int32_t vad_enabled=0;
+   spx_int32_t dtx_enabled=0;
+   int nbBytes;
+   const SpeexMode *mode=NULL;
+   int modeID = -1;
+   void *st;
+   SpeexBits bits;
+   char cbits[MAX_FRAME_BYTES];
+   int with_skeleton = 0;
+   struct option long_options[] =
+   {
+      {"wideband", no_argument, NULL, 0},
+      {"ultra-wideband", no_argument, NULL, 0},
+      {"narrowband", no_argument, NULL, 0},
+      {"vbr", no_argument, NULL, 0},
+      {"vbr-max-bitrate", required_argument, NULL, 0},
+      {"abr", required_argument, NULL, 0},
+      {"vad", no_argument, NULL, 0},
+      {"dtx", no_argument, NULL, 0},
+      {"quality", required_argument, NULL, 0},
+      {"bitrate", required_argument, NULL, 0},
+      {"nframes", required_argument, NULL, 0},
+      {"comp", required_argument, NULL, 0},
+      {"denoise", no_argument, NULL, 0},
+      {"agc", no_argument, NULL, 0},
+      {"skeleton",no_argument,NULL, 0},
+      {"help", no_argument, NULL, 0},
+      {"quiet", no_argument, NULL, 0},
+      {"le", no_argument, NULL, 0},
+      {"be", no_argument, NULL, 0},
+      {"8bit", no_argument, NULL, 0},
+      {"16bit", no_argument, NULL, 0},
+      {"stereo", no_argument, NULL, 0},
+      {"rate", required_argument, NULL, 0},
+      {"version", no_argument, NULL, 0},
+      {"version-short", no_argument, NULL, 0},
+      {"comment", required_argument, NULL, 0},
+      {"author", required_argument, NULL, 0},
+      {"title", required_argument, NULL, 0},
+      {0, 0, 0, 0}
+   };
+   int print_bitrate=0;
+   spx_int32_t rate=0;
+   spx_int32_t size;
+   int chan=1;
+   int fmt=16;
+   spx_int32_t quality=-1;
+   float vbr_quality=-1;
+   int lsb=1;
+   ogg_stream_state os;
+   ogg_stream_state so; /* ogg stream for skeleton bitstream */
+   ogg_page 		 og;
+   ogg_packet 		 op;
+   int bytes_written=0, ret, result;
+   int id=-1;
+   SpeexHeader header;
+   int nframes=1;
+   spx_int32_t complexity=3;
+   char *vendor_string = "Encoded with Speex " SPEEX_VERSION;
+   char *comments;
+   int comments_length;
+   int close_in=0, close_out=0;
+   int eos=0;
+   spx_int32_t bitrate=0;
+   double cumul_bits=0, enc_frames=0;
+   char first_bytes[12];
+   int wave_input=0;
+   spx_int32_t tmp;
+   SpeexPreprocessState *preprocess = NULL;
+   int denoise_enabled=0, agc_enabled=0;
+   spx_int32_t lookahead = 0;
+   
+   comment_init(&comments, &comments_length, vendor_string);
+
+   /*Process command-line options*/
+   while(1)
+   {
+      c = getopt_long (argc, argv, "nwuhvV",
+                       long_options, &option_index);
+      if (c==-1)
+         break;
+      
+      switch(c)
+      {
+      case 0:
+         if (strcmp(long_options[option_index].name,"narrowband")==0)
+         {
+            modeID = SPEEX_MODEID_NB;
+         } else if (strcmp(long_options[option_index].name,"wideband")==0)
+         {
+            modeID = SPEEX_MODEID_WB;
+         } else if (strcmp(long_options[option_index].name,"ultra-wideband")==0)
+         {
+            modeID = SPEEX_MODEID_UWB;
+         } else if (strcmp(long_options[option_index].name,"vbr")==0)
+         {
+            vbr_enabled=1;
+         } else if (strcmp(long_options[option_index].name,"vbr-max-bitrate")==0)
+         {
+            vbr_max=atoi(optarg);
+            if (vbr_max<1)
+            {
+               fprintf (stderr, "Invalid VBR max bit-rate value: %d\n", vbr_max);
+               exit(1);
+            }
+         } else if (strcmp(long_options[option_index].name,"abr")==0)
+         {
+            abr_enabled=atoi(optarg);
+            if (!abr_enabled)
+            {
+               fprintf (stderr, "Invalid ABR value: %d\n", abr_enabled);
+               exit(1);
+            }
+         } else if (strcmp(long_options[option_index].name,"vad")==0)
+         {
+            vad_enabled=1;
+         } else if (strcmp(long_options[option_index].name,"dtx")==0)
+         {
+            dtx_enabled=1;
+         } else if (strcmp(long_options[option_index].name,"quality")==0)
+         {
+            quality = atoi (optarg);
+            vbr_quality=atof(optarg);
+         } else if (strcmp(long_options[option_index].name,"bitrate")==0)
+         {
+            bitrate = atoi (optarg);
+         } else if (strcmp(long_options[option_index].name,"nframes")==0)
+         {
+            nframes = atoi (optarg);
+            if (nframes<1)
+               nframes=1;
+            if (nframes>10)
+               nframes=10;
+         } else if (strcmp(long_options[option_index].name,"comp")==0)
+         {
+            complexity = atoi (optarg);
+         } else if (strcmp(long_options[option_index].name,"denoise")==0)
+         {
+            denoise_enabled=1;
+         } else if (strcmp(long_options[option_index].name,"agc")==0)
+         {
+            agc_enabled=1;
+         } else if (strcmp(long_options[option_index].name,"skeleton")==0)
+         {
+            with_skeleton=1;
+         } else if (strcmp(long_options[option_index].name,"help")==0)
+         {
+            usage();
+            exit(0);
+         } else if (strcmp(long_options[option_index].name,"quiet")==0)
+         {
+            quiet = 1;
+         } else if (strcmp(long_options[option_index].name,"version")==0)
+         {
+            version();
+            exit(0);
+         } else if (strcmp(long_options[option_index].name,"version-short")==0)
+         {
+            version_short();
+            exit(0);
+         } else if (strcmp(long_options[option_index].name,"le")==0)
+         {
+            lsb=1;
+         } else if (strcmp(long_options[option_index].name,"be")==0)
+         {
+            lsb=0;
+         } else if (strcmp(long_options[option_index].name,"8bit")==0)
+         {
+            fmt=8;
+         } else if (strcmp(long_options[option_index].name,"16bit")==0)
+         {
+            fmt=16;
+         } else if (strcmp(long_options[option_index].name,"stereo")==0)
+         {
+            chan=2;
+         } else if (strcmp(long_options[option_index].name,"rate")==0)
+         {
+            rate=atoi (optarg);
+         } else if (strcmp(long_options[option_index].name,"comment")==0)
+         {
+	   if (!strchr(optarg, '='))
+	   {
+	     fprintf (stderr, "Invalid comment: %s\n", optarg);
+	     fprintf (stderr, "Comments must be of the form name=value\n");
+	     exit(1);
+	   }
+           comment_add(&comments, &comments_length, NULL, optarg); 
+         } else if (strcmp(long_options[option_index].name,"author")==0)
+         {
+           comment_add(&comments, &comments_length, "author=", optarg); 
+         } else if (strcmp(long_options[option_index].name,"title")==0)
+         {
+           comment_add(&comments, &comments_length, "title=", optarg); 
+         }
+
+         break;
+      case 'n':
+         modeID = SPEEX_MODEID_NB;
+         break;
+      case 'h':
+         usage();
+         exit(0);
+         break;
+      case 'v':
+         version();
+         exit(0);
+         break;
+      case 'V':
+         print_bitrate=1;
+         break;
+      case 'w':
+         modeID = SPEEX_MODEID_WB;
+         break;
+      case 'u':
+         modeID = SPEEX_MODEID_UWB;
+         break;
+      case '?':
+         usage();
+         exit(1);
+         break;
+      }
+   }
+   if (argc-optind!=2)
+   {
+      usage();
+      exit(1);
+   }
+   inFile=argv[optind];
+   outFile=argv[optind+1];
+
+   /*Initialize Ogg stream struct*/
+   srand(time(NULL));
+   if (ogg_stream_init(&os, rand())==-1)
+   {
+      fprintf(stderr,"Error: stream init failed\n");
+      exit(1);
+   }
+   if (with_skeleton && ogg_stream_init(&so, rand())==-1)
+   {
+      fprintf(stderr,"Error: stream init failed\n");
+      exit(1);
+   }
+
+   if (strcmp(inFile, "-")==0)
+   {
+#if defined WIN32 || defined _WIN32
+         _setmode(_fileno(stdin), _O_BINARY);
+#endif
+      fin=stdin;
+   }
+   else 
+   {
+      fin = fopen(inFile, "rb");
+      if (!fin)
+      {
+         perror(inFile);
+         exit(1);
+      }
+      close_in=1;
+   }
+
+   {
+      fread(first_bytes, 1, 12, fin);
+      if (strncmp(first_bytes,"RIFF",4)==0 && strncmp(first_bytes,"RIFF",4)==0)
+      {
+         if (read_wav_header(fin, &rate, &chan, &fmt, &size)==-1)
+            exit(1);
+         wave_input=1;
+         lsb=1; /* CHECK: exists big-endian .wav ?? */
+      }
+   }
+
+   if (modeID==-1 && !rate)
+   {
+      /* By default, use narrowband/8 kHz */
+      modeID = SPEEX_MODEID_NB;
+      rate=8000;
+   } else if (modeID!=-1 && rate)
+   {
+      mode = speex_lib_get_mode (modeID);
+      if (rate>48000)
+      {
+         fprintf (stderr, "Error: sampling rate too high: %d Hz, try down-sampling\n", rate);
+         exit(1);
+      } else if (rate>25000)
+      {
+         if (modeID != SPEEX_MODEID_UWB)
+         {
+            fprintf (stderr, "Warning: Trying to encode in %s at %d Hz. I'll do it but I suggest you try ultra-wideband instead\n", mode->modeName , rate);
+         }
+      } else if (rate>12500)
+      {
+         if (modeID != SPEEX_MODEID_WB)
+         {
+            fprintf (stderr, "Warning: Trying to encode in %s at %d Hz. I'll do it but I suggest you try wideband instead\n", mode->modeName , rate);
+         }
+      } else if (rate>=6000)
+      {
+         if (modeID != SPEEX_MODEID_NB)
+         {
+            fprintf (stderr, "Warning: Trying to encode in %s at %d Hz. I'll do it but I suggest you try narrowband instead\n", mode->modeName , rate);
+         }
+      } else {
+         fprintf (stderr, "Error: sampling rate too low: %d Hz\n", rate);
+         exit(1);
+      }
+   } else if (modeID==-1)
+   {
+      if (rate>48000)
+      {
+         fprintf (stderr, "Error: sampling rate too high: %d Hz, try down-sampling\n", rate);
+         exit(1);
+      } else if (rate>25000)
+      {
+         modeID = SPEEX_MODEID_UWB;
+      } else if (rate>12500)
+      {
+         modeID = SPEEX_MODEID_WB;
+      } else if (rate>=6000)
+      {
+         modeID = SPEEX_MODEID_NB;
+      } else {
+         fprintf (stderr, "Error: Sampling rate too low: %d Hz\n", rate);
+         exit(1);
+      }
+   } else if (!rate)
+   {
+      if (modeID == SPEEX_MODEID_NB)
+         rate=8000;
+      else if (modeID == SPEEX_MODEID_WB)
+         rate=16000;
+      else if (modeID == SPEEX_MODEID_UWB)
+         rate=32000;
+   }
+
+   if (!quiet)
+      if (rate!=8000 && rate!=16000 && rate!=32000)
+         fprintf (stderr, "Warning: Speex is only optimized for 8, 16 and 32 kHz. It will still work at %d Hz but your mileage may vary\n", rate); 
+
+   if (!mode)
+      mode = speex_lib_get_mode (modeID);
+
+   speex_init_header(&header, rate, 1, mode);
+   header.frames_per_packet=nframes;
+   header.vbr=vbr_enabled;
+   header.nb_channels = chan;
+
+   {
+      char *st_string="mono";
+      if (chan==2)
+         st_string="stereo";
+      if (!quiet)
+         fprintf (stderr, "Encoding %d Hz audio using %s mode (%s)\n", 
+               header.rate, mode->modeName, st_string);
+   }
+   /*fprintf (stderr, "Encoding %d Hz audio at %d bps using %s mode\n", 
+     header.rate, mode->bitrate, mode->modeName);*/
+
+   /*Initialize Speex encoder*/
+   st = speex_encoder_init(mode);
+
+   if (strcmp(outFile,"-")==0)
+   {
+#if defined WIN32 || defined _WIN32
+      _setmode(_fileno(stdout), _O_BINARY);
+#endif
+      fout=stdout;
+   }
+   else 
+   {
+      fout = fopen(outFile, "wb");
+      if (!fout)
+      {
+         perror(outFile);
+         exit(1);
+      }
+      close_out=1;
+   }
+
+   speex_encoder_ctl(st, SPEEX_GET_FRAME_SIZE, &frame_size);
+   speex_encoder_ctl(st, SPEEX_SET_COMPLEXITY, &complexity);
+   speex_encoder_ctl(st, SPEEX_SET_SAMPLING_RATE, &rate);
+
+   if (quality >= 0)
+   {
+      if (vbr_enabled)
+      {
+         if (vbr_max>0)
+            speex_encoder_ctl(st, SPEEX_SET_VBR_MAX_BITRATE, &vbr_max);
+         speex_encoder_ctl(st, SPEEX_SET_VBR_QUALITY, &vbr_quality);
+      }
+      else
+         speex_encoder_ctl(st, SPEEX_SET_QUALITY, &quality);
+   }
+   if (bitrate)
+   {
+      if (quality >= 0 && vbr_enabled)
+         fprintf (stderr, "Warning: --bitrate option is overriding --quality\n");
+      speex_encoder_ctl(st, SPEEX_SET_BITRATE, &bitrate);
+   }
+   if (vbr_enabled)
+   {
+      tmp=1;
+      speex_encoder_ctl(st, SPEEX_SET_VBR, &tmp);
+   } else if (vad_enabled)
+   {
+      tmp=1;
+      speex_encoder_ctl(st, SPEEX_SET_VAD, &tmp);
+   }
+   if (dtx_enabled)
+      speex_encoder_ctl(st, SPEEX_SET_DTX, &tmp);
+   if (dtx_enabled && !(vbr_enabled || abr_enabled || vad_enabled))
+   {
+      fprintf (stderr, "Warning: --dtx is useless without --vad, --vbr or --abr\n");
+   } else if ((vbr_enabled || abr_enabled) && (vad_enabled))
+   {
+      fprintf (stderr, "Warning: --vad is already implied by --vbr or --abr\n");
+   }
+   if (with_skeleton) {
+      fprintf (stderr, "Warning: Enabling skeleton output may cause some decoders to fail.\n");
+   }
+
+   if (abr_enabled)
+   {
+      speex_encoder_ctl(st, SPEEX_SET_ABR, &abr_enabled);
+   }
+
+   speex_encoder_ctl(st, SPEEX_GET_LOOKAHEAD, &lookahead);
+   
+   if (denoise_enabled || agc_enabled)
+   {
+      preprocess = speex_preprocess_state_init(frame_size, rate);
+      speex_preprocess_ctl(preprocess, SPEEX_PREPROCESS_SET_DENOISE, &denoise_enabled);
+      speex_preprocess_ctl(preprocess, SPEEX_PREPROCESS_SET_AGC, &agc_enabled);
+      lookahead += frame_size;
+   }
+
+   /* first packet should be the skeleton header. */
+
+   if (with_skeleton) {
+      add_fishead_packet(&so);
+      if ((ret = flush_ogg_stream_to_file(&so, fout))) {
+	 fprintf (stderr,"Error: failed skeleton (fishead) header to output stream\n");
+         exit(1);
+      } else
+	 bytes_written += ret;
+   }
+
+   /*Write header*/
+   {
+      int packet_size;
+      op.packet = (unsigned char *)speex_header_to_packet(&header, &packet_size);
+      op.bytes = packet_size;
+      op.b_o_s = 1;
+      op.e_o_s = 0;
+      op.granulepos = 0;
+      op.packetno = 0;
+      ogg_stream_packetin(&os, &op);
+      free(op.packet);
+
+      while((result = ogg_stream_flush(&os, &og)))
+      {
+         if(!result) break;
+         ret = oe_write_page(&og, fout);
+         if(ret != og.header_len + og.body_len)
+         {
+            fprintf (stderr,"Error: failed writing header to output stream\n");
+            exit(1);
+         }
+         else
+            bytes_written += ret;
+      }
+
+      op.packet = (unsigned char *)comments;
+      op.bytes = comments_length;
+      op.b_o_s = 0;
+      op.e_o_s = 0;
+      op.granulepos = 0;
+      op.packetno = 1;
+      ogg_stream_packetin(&os, &op);
+   }
+
+   /* fisbone packet should be write after all bos pages */
+   if (with_skeleton) {
+      add_fisbone_packet(&so, os.serialno, &header);
+      if ((ret = flush_ogg_stream_to_file(&so, fout))) {
+	 fprintf (stderr,"Error: failed writing skeleton (fisbone )header to output stream\n");
+         exit(1);
+      } else
+	 bytes_written += ret;
+   }
+
+   /* writing the rest of the speex header packets */
+   while((result = ogg_stream_flush(&os, &og)))
+   {
+      if(!result) break;
+      ret = oe_write_page(&og, fout);
+      if(ret != og.header_len + og.body_len)
+      {
+         fprintf (stderr,"Error: failed writing header to output stream\n");
+         exit(1);
+      }
+      else
+         bytes_written += ret;
+   }
+
+   free(comments);
+
+   /* write the skeleton eos packet */
+   if (with_skeleton) {
+      add_eos_packet_to_stream(&so);
+      if ((ret = flush_ogg_stream_to_file(&so, fout))) {
+         fprintf (stderr,"Error: failed writing skeleton header to output stream\n");
+         exit(1);
+      } else
+	 bytes_written += ret;
+   }
+
+
+   speex_bits_init(&bits);
+
+   if (!wave_input)
+   {
+      nb_samples = read_samples(fin,frame_size,fmt,chan,lsb,input, first_bytes, NULL);
+   } else {
+      nb_samples = read_samples(fin,frame_size,fmt,chan,lsb,input, NULL, &size);
+   }
+   if (nb_samples==0)
+      eos=1;
+   total_samples += nb_samples;
+   nb_encoded = -lookahead;
+   /*Main encoding loop (one frame per iteration)*/
+   while (!eos || total_samples>nb_encoded)
+   {
+      id++;
+      /*Encode current frame*/
+      if (chan==2)
+         speex_encode_stereo_int(input, frame_size, &bits);
+
+      if (preprocess)
+         speex_preprocess(preprocess, input, NULL);
+
+      speex_encode_int(st, input, &bits);
+      
+      nb_encoded += frame_size;
+      if (print_bitrate) {
+         int tmp;
+         char ch=13;
+         speex_encoder_ctl(st, SPEEX_GET_BITRATE, &tmp);
+         fputc (ch, stderr);
+         cumul_bits += tmp;
+         enc_frames += 1;
+         if (!quiet)
+         {
+            if (vad_enabled || vbr_enabled || abr_enabled)
+               fprintf (stderr, "Bitrate is use: %d bps  (average %d bps)   ", tmp, (int)(cumul_bits/enc_frames));
+            else
+               fprintf (stderr, "Bitrate is use: %d bps     ", tmp);
+         }
+         
+      }
+
+      if (wave_input)
+      {
+         nb_samples = read_samples(fin,frame_size,fmt,chan,lsb,input, NULL, &size);
+      } else {
+         nb_samples = read_samples(fin,frame_size,fmt,chan,lsb,input, NULL, NULL);
+      }
+      if (nb_samples==0)
+      {
+         eos=1;
+      }
+      if (eos && total_samples<=nb_encoded)
+         op.e_o_s = 1;
+      else
+         op.e_o_s = 0;
+      total_samples += nb_samples;
+
+      if ((id+1)%nframes!=0)
+         continue;
+      speex_bits_insert_terminator(&bits);
+      nbBytes = speex_bits_write(&bits, cbits, MAX_FRAME_BYTES);
+      speex_bits_reset(&bits);
+      op.packet = (unsigned char *)cbits;
+      op.bytes = nbBytes;
+      op.b_o_s = 0;
+      /*Is this redundent?*/
+      if (eos && total_samples<=nb_encoded)
+         op.e_o_s = 1;
+      else
+         op.e_o_s = 0;
+      op.granulepos = (id+1)*frame_size-lookahead;
+      if (op.granulepos>total_samples)
+         op.granulepos = total_samples;
+      /*printf ("granulepos: %d %d %d %d %d %d\n", (int)op.granulepos, id, nframes, lookahead, 5, 6);*/
+      op.packetno = 2+id/nframes;
+      ogg_stream_packetin(&os, &op);
+
+      /*Write all new pages (most likely 0 or 1)*/
+      while (ogg_stream_pageout(&os,&og))
+      {
+         ret = oe_write_page(&og, fout);
+         if(ret != og.header_len + og.body_len)
+         {
+            fprintf (stderr,"Error: failed writing header to output stream\n");
+            exit(1);
+         }
+         else
+            bytes_written += ret;
+      }
+   }
+   if ((id+1)%nframes!=0)
+   {
+      while ((id+1)%nframes!=0)
+      {
+         id++;
+         speex_bits_pack(&bits, 15, 5);
+      }
+      nbBytes = speex_bits_write(&bits, cbits, MAX_FRAME_BYTES);
+      op.packet = (unsigned char *)cbits;
+      op.bytes = nbBytes;
+      op.b_o_s = 0;
+      op.e_o_s = 1;
+      op.granulepos = (id+1)*frame_size-lookahead;
+      if (op.granulepos>total_samples)
+         op.granulepos = total_samples;
+
+      op.packetno = 2+id/nframes;
+      ogg_stream_packetin(&os, &op);
+   }
+   /*Flush all pages left to be written*/
+   while (ogg_stream_flush(&os, &og))
+   {
+      ret = oe_write_page(&og, fout);
+      if(ret != og.header_len + og.body_len)
+      {
+         fprintf (stderr,"Error: failed writing header to output stream\n");
+         exit(1);
+      }
+      else
+         bytes_written += ret;
+   }
+
+   speex_encoder_destroy(st);
+   speex_bits_destroy(&bits);
+   ogg_stream_clear(&os);
+
+   if (close_in)
+      fclose(fin);
+   if (close_out)
+      fclose(fout);
+   return 0;
+}
+
+/*                 
+ Comments will be stored in the Vorbis style.            
+ It is describled in the "Structure" section of
+    http://www.xiph.org/ogg/vorbis/doc/v-comment.html
+
+The comment header is decoded as follows:
+  1) [vendor_length] = read an unsigned integer of 32 bits
+  2) [vendor_string] = read a UTF-8 vector as [vendor_length] octets
+  3) [user_comment_list_length] = read an unsigned integer of 32 bits
+  4) iterate [user_comment_list_length] times {
+     5) [length] = read an unsigned integer of 32 bits
+     6) this iteration's user comment = read a UTF-8 vector as [length] octets
+     }
+  7) [framing_bit] = read a single bit as boolean
+  8) if ( [framing_bit]  unset or end of packet ) then ERROR
+  9) done.
+
+  If you have troubles, please write to ymnk at jcraft.com.
+ */
+
+#define readint(buf, base) (((buf[base+3]<<24)&0xff000000)| \
+                           ((buf[base+2]<<16)&0xff0000)| \
+                           ((buf[base+1]<<8)&0xff00)| \
+  	           	    (buf[base]&0xff))
+#define writeint(buf, base, val) do{ buf[base+3]=((val)>>24)&0xff; \
+                                     buf[base+2]=((val)>>16)&0xff; \
+                                     buf[base+1]=((val)>>8)&0xff; \
+                                     buf[base]=(val)&0xff; \
+                                 }while(0)
+
+void comment_init(char **comments, int* length, char *vendor_string)
+{
+  int vendor_length=strlen(vendor_string);
+  int user_comment_list_length=0;
+  int len=4+vendor_length+4;
+  char *p=(char*)malloc(len);
+  if(p==NULL){
+  }
+  writeint(p, 0, vendor_length);
+  memcpy(p+4, vendor_string, vendor_length);
+  writeint(p, 4+vendor_length, user_comment_list_length);
+  *length=len;
+  *comments=p;
+}
+void comment_add(char **comments, int* length, char *tag, char *val)
+{
+  char* p=*comments;
+  int vendor_length=readint(p, 0);
+  int user_comment_list_length=readint(p, 4+vendor_length);
+  int tag_len=(tag?strlen(tag):0);
+  int val_len=strlen(val);
+  int len=(*length)+4+tag_len+val_len;
+
+  p=(char*)realloc(p, len);
+  if(p==NULL){
+  }
+
+  writeint(p, *length, tag_len+val_len);      /* length of comment */
+  if(tag) memcpy(p+*length+4, tag, tag_len);  /* comment */
+  memcpy(p+*length+4+tag_len, val, val_len);  /* comment */
+  writeint(p, 4+vendor_length, user_comment_list_length+1);
+
+  *comments=p;
+  *length=len;
+}
+#undef readint
+#undef writeint

Added: freeswitch/trunk/libs/speex/src/wav_io.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/src/wav_io.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,263 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: wav_io.c
+   Routines to handle wav (RIFF) headers
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+#include <stdio.h>
+#include <string.h>
+#include "speex/speex_types.h"
+
+static spx_uint32_t le_int(spx_uint32_t i)
+{
+   spx_uint32_t ret=i;
+#ifdef WORDS_BIGENDIAN
+   ret =  i>>24;
+   ret += (i>>8)&0x0000ff00;
+   ret += (i<<8)&0x00ff0000;
+   ret += (i<<24);
+#endif
+   return ret;
+}
+
+unsigned short be_short(unsigned short s)
+{
+   unsigned short ret=s;
+#ifndef WORDS_BIGENDIAN
+   ret =  s>>8;
+   ret += s<<8;
+#endif
+   return ret;
+}
+
+unsigned short le_short(unsigned short s)
+{
+   unsigned short ret=s;
+#ifdef WORDS_BIGENDIAN
+   ret =  s>>8;
+   ret += s<<8;
+#endif
+   return ret;
+}
+
+
+int read_wav_header(FILE *file, int *rate, int *channels, int *format, spx_int32_t *size)
+{
+   char ch[5];
+   spx_int32_t itmp;
+   spx_int16_t stmp;
+   spx_int32_t bpersec;
+   spx_int16_t balign;
+   int skip_bytes;
+   int i;
+
+   ch[4]=0;
+#if 0
+   fread(ch, 1, 4, file);
+   if (strcmp(ch, "RIFF")!=0)
+   {
+      fseek(file, 0, SEEK_SET);
+      return 0;
+   }
+
+   fread(&itmp, 4, 1, file);
+   *size = le_int(itmp-36);
+
+   fread(ch, 1, 4, file);
+   if (strcmp(ch, "WAVE")!=0)
+   {
+      fprintf (stderr, "RIFF file is not a WAVE file\n");
+      return -1;
+   }
+#endif
+   fread(ch, 1, 4, file);
+   while (strcmp(ch, "fmt ")!=0)
+   {
+      fread(&itmp, 4, 1, file);
+      itmp = le_int(itmp);
+      /*fprintf (stderr, "skip=%d\n", itmp);*/
+      /*strange way of seeking, but it works even for pipes*/
+      for (i=0;i<itmp;i++)
+         fgetc(file);
+      /*fseek(file, itmp, SEEK_CUR);*/
+      fread(ch, 1, 4, file);
+      if (feof(file))
+      {
+         fprintf (stderr, "Corrupted WAVE file: no \"fmt \"\n");
+         return -1;
+      }
+   }
+   /*if (strcmp(ch, "fmt ")!=0)
+   {
+      fprintf (stderr, "Corrupted WAVE file: no \"fmt \"\n");
+      return -1;
+      }*/
+   
+   fread(&itmp, 4, 1, file);
+   itmp = le_int(itmp);
+   skip_bytes=itmp-16;
+   /*fprintf (stderr, "skip=%d\n", skip_bytes);*/
+   
+   fread(&stmp, 2, 1, file);
+   stmp = le_short(stmp);
+   if (stmp!=1)
+   {
+      fprintf (stderr, "Only PCM encoding is supported\n");
+      return -1;
+   }
+
+   fread(&stmp, 2, 1, file);
+   stmp = le_short(stmp);
+   *channels = stmp;
+   
+   if (stmp>2)
+   {
+      fprintf (stderr, "Only mono and (intensity) stereo supported\n");
+      return -1;
+   }
+
+   fread(&itmp, 4, 1, file);
+   itmp = le_int(itmp);
+   *rate = itmp;
+   if (*rate != 8000 && *rate != 16000 && *rate != 11025 && *rate != 22050 && *rate != 32000 && *rate != 44100 && *rate != 48000)
+   {
+      fprintf (stderr, "Only 8 kHz (narrowband) and 16 kHz (wideband) supported (plus 11.025 kHz and 22.05 kHz, but your mileage may vary)\n");
+      return -1;
+   }
+
+   fread(&itmp, 4, 1, file);
+   bpersec = le_int(itmp);
+
+   fread(&stmp, 2, 1, file);
+   balign = le_short(stmp);
+
+   fread(&stmp, 2, 1, file);
+   stmp = le_short(stmp);
+   if (stmp!=16 && stmp!=8)
+   {
+      fprintf (stderr, "Only 8/16-bit linear supported\n");
+      return -1;
+   }
+   *format=stmp;
+
+   if (bpersec!=*rate**channels*stmp/8)
+   {
+      fprintf (stderr, "Corrupted header: ByteRate mismatch\n");
+      return -1;
+   }
+
+   if (balign!=*channels*stmp/8)
+   {
+      fprintf (stderr, "Corrupted header: BlockAlign mismatch\n");
+      return -1;
+   }
+
+   
+   /*strange way of seeking, but it works even for pipes*/
+   if (skip_bytes>0)
+      for (i=0;i<skip_bytes;i++)
+         fgetc(file);
+
+   /*fseek(file, skip_bytes, SEEK_CUR);*/
+
+   fread(ch, 1, 4, file);
+   while (strcmp(ch, "data")!=0)
+   {
+      fread(&itmp, 4, 1, file);
+      itmp = le_int(itmp);
+      /*strange way of seeking, but it works even for pipes*/
+      for (i=0;i<itmp;i++)
+         fgetc(file);
+      /*fseek(file, itmp, SEEK_CUR);*/
+      fread(ch, 1, 4, file);
+      if (feof(file))
+      {
+         fprintf (stderr, "Corrupted WAVE file: no \"data\"\n");
+         return -1;
+      }
+   }
+
+   /*Ignore this for now*/
+   fread(&itmp, 4, 1, file);
+   itmp = le_int(itmp);
+
+   *size=itmp;
+
+   return 1;
+}
+
+
+
+void write_wav_header(FILE *file, int rate, int channels, int format, int size)
+{
+   char ch[5];
+   spx_int32_t itmp;
+   spx_int16_t stmp;
+
+   ch[4]=0;
+
+   fprintf (file, "RIFF");
+
+   itmp = 0x7fffffff;
+   fwrite(&itmp, 4, 1, file);
+
+   fprintf (file, "WAVEfmt ");
+
+   itmp = le_int(16);
+   fwrite(&itmp, 4, 1, file);
+
+   stmp = le_short(1);
+   fwrite(&stmp, 2, 1, file);
+
+   stmp = le_short(channels);
+   fwrite(&stmp, 2, 1, file);
+
+   itmp = le_int(rate);
+   fwrite(&itmp, 4, 1, file);
+
+   itmp = le_int(rate*channels*2);
+   fwrite(&itmp, 4, 1, file);
+
+   stmp = le_short(2*channels);
+   fwrite(&stmp, 2, 1, file);
+
+   stmp = le_short(16);
+   fwrite(&stmp, 2, 1, file);
+
+   fprintf (file, "data");
+
+   itmp = le_int(0x7fffffff);
+   fwrite(&itmp, 4, 1, file);
+
+
+}

Added: freeswitch/trunk/libs/speex/src/wav_io.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/src/wav_io.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,46 @@
+/* Copyright (C) 2002 Jean-Marc Valin 
+   File: wav_io.h
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef WAV_IO_H
+#define WAV_IO_H
+
+#include <stdio.h>
+#include "speex/speex_types.h"
+
+unsigned short be_short(unsigned short s);
+unsigned short le_short(unsigned short s);
+spx_uint32_t le_int(spx_uint32_t i);
+
+int read_wav_header(FILE *file, int *rate, int *channels, int *format, spx_int32_t *size);
+
+void write_wav_header(FILE *file, int rate, int channels, int format, int size);
+
+#endif

Added: freeswitch/trunk/libs/speex/src/wave_out.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/src/wave_out.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,220 @@
+/* Copyright (c) 2002, John Edwards
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+/* Set TABS = 4 */
+/********************************************************************
+
+ function: To provide playback of 16 bit PCM wave data in Win32
+           environments from decoded compressed files.
+
+ ********************************************************************/
+
+#if defined WIN32 || defined _WIN32
+
+#include <string.h>
+#include <errno.h>
+#include "wave_out.h"
+
+#define MAXWAVESIZE     4294967040LU
+#define MAX_WAVEBLOCKS    32
+
+// This is modified for USE_WIN_AUDIO - ONLY 2002-02-27
+
+
+static CRITICAL_SECTION  cs;
+static HWAVEOUT          dev                    = NULL;
+static int               ScheduledBlocks        = 0;
+static int               PlayedWaveHeadersCount = 0;          // free index
+static WAVEHDR*          PlayedWaveHeaders [MAX_WAVEBLOCKS];
+
+static int
+Box ( const char* msg )
+{
+	MessageBox ( NULL, msg, " "VERSION_STRING": Error Message . . .", MB_OK | MB_ICONEXCLAMATION );
+	return -1;
+}
+
+
+/*
+ *  This function registers already played WAVE chunks. Freeing is done by free_memory(),
+ */
+
+static void CALLBACK
+wave_callback ( HWAVE hWave, UINT uMsg, DWORD dwInstance, DWORD dwParam1, DWORD dwParam2 )
+{
+	if ( uMsg == WOM_DONE ) {
+		EnterCriticalSection ( &cs );
+		PlayedWaveHeaders [PlayedWaveHeadersCount++] = (WAVEHDR*) dwParam1;
+		LeaveCriticalSection ( &cs );
+	}
+}
+
+
+static void
+free_memory ( void )
+{
+	WAVEHDR*  wh;
+	HGLOBAL   hg;
+
+	EnterCriticalSection ( &cs );
+	wh = PlayedWaveHeaders [--PlayedWaveHeadersCount];
+	ScheduledBlocks--;                               // decrease the number of USED blocks
+	LeaveCriticalSection ( &cs );
+
+	waveOutUnprepareHeader ( dev, wh, sizeof (WAVEHDR) );
+
+	hg = GlobalHandle ( wh -> lpData );       // Deallocate the buffer memory
+	GlobalUnlock (hg);
+	GlobalFree   (hg);
+
+	hg = GlobalHandle ( wh );                 // Deallocate the header memory
+	GlobalUnlock (hg);
+	GlobalFree   (hg);
+}
+
+
+Int
+Set_WIN_Params ( FILE_T   dummyFile ,
+                 Ldouble  SampleFreq,
+                 Uint     BitsPerSample,
+                 Uint     Channels )
+{
+	WAVEFORMATEX  outFormat;
+	UINT          deviceID = WAVE_MAPPER;
+
+	(void) dummyFile;
+
+	if ( waveOutGetNumDevs () == 0 )
+		return Box ( "No audio device present." );
+
+	outFormat.wFormatTag      = WAVE_FORMAT_PCM;
+	outFormat.wBitsPerSample  = BitsPerSample;
+	outFormat.nChannels       = Channels;
+	outFormat.nSamplesPerSec  = (unsigned long)(SampleFreq + 0.5);
+	outFormat.nBlockAlign     = (outFormat.wBitsPerSample + 7) / 8 * outFormat.nChannels;
+	outFormat.nAvgBytesPerSec = outFormat.nSamplesPerSec * outFormat.nBlockAlign;
+
+	switch ( waveOutOpen ( &dev, deviceID, &outFormat, (DWORD)wave_callback, 0, CALLBACK_FUNCTION ) )
+	{
+		case MMSYSERR_ALLOCATED:   return Box ( "Device is already open." );
+		case MMSYSERR_BADDEVICEID: return Box ( "The specified device is out of range." );
+		case MMSYSERR_NODRIVER:    return Box ( "There is no audio driver in this system." );
+		case MMSYSERR_NOMEM:       return Box ( "Unable to allocate sound memory." );
+		case WAVERR_BADFORMAT:     return Box ( "This audio format is not supported." );
+		case WAVERR_SYNC:          return Box ( "The device is synchronous." );
+		default:                   return Box ( "Unknown media error." );
+		case MMSYSERR_NOERROR:     break;
+	}
+
+	waveOutReset ( dev );
+	InitializeCriticalSection ( &cs );
+	SetPriorityClass ( GetCurrentProcess (), HIGH_PRIORITY_CLASS );
+	return 0;
+}
+
+
+int
+WIN_Play_Samples ( const void* data, size_t len )
+{
+	HGLOBAL    hg;
+	HGLOBAL    hg2;
+	LPWAVEHDR  wh;
+	void*      allocptr;
+
+	do {
+		while ( PlayedWaveHeadersCount > 0 )                // free used blocks ...
+			free_memory ();
+
+		if ( ScheduledBlocks < sizeof(PlayedWaveHeaders)/sizeof(*PlayedWaveHeaders) ) // wait for a free block ...
+			break;
+		Sleep (26);
+	} while (1);
+
+	if ( (hg2 = GlobalAlloc ( GMEM_MOVEABLE, len )) == NULL )   // allocate some memory for a copy of the buffer
+		return Box ( "GlobalAlloc failed." );
+
+	allocptr = GlobalLock (hg2);
+	CopyMemory ( allocptr, data, len );                         // Here we can call any modification output functions we want....
+
+	if ( (hg = GlobalAlloc (GMEM_MOVEABLE | GMEM_ZEROINIT, sizeof (WAVEHDR))) == NULL ) // now make a header and WRITE IT!
+		return -1;
+
+	wh                   = GlobalLock (hg);
+	wh -> dwBufferLength = len;
+	wh -> lpData         = allocptr;
+
+	if ( waveOutPrepareHeader ( dev, wh, sizeof (WAVEHDR)) != MMSYSERR_NOERROR ) {
+		GlobalUnlock (hg);
+		GlobalFree   (hg);
+		return -1;
+	}
+
+	if ( waveOutWrite ( dev, wh, sizeof (WAVEHDR)) != MMSYSERR_NOERROR ) {
+		GlobalUnlock (hg);
+		GlobalFree   (hg);
+		return -1;
+	}
+
+	EnterCriticalSection ( &cs );
+	ScheduledBlocks++;
+	LeaveCriticalSection ( &cs );
+
+	return len;
+}
+
+
+int
+WIN_Audio_close ( void )
+{
+	if ( dev != NULL ) {
+
+		while ( ScheduledBlocks > 0 ) {
+			Sleep (ScheduledBlocks);
+			while ( PlayedWaveHeadersCount > 0 )         // free used blocks ...
+				free_memory ();
+		}
+
+		waveOutReset (dev);      // reset the device
+		waveOutClose (dev);      // close the device
+		dev = NULL;
+	}
+
+	DeleteCriticalSection ( &cs );
+	ScheduledBlocks = 0;
+	return 0;
+}
+
+#endif
+
+/* end of wave_out.c */

Added: freeswitch/trunk/libs/speex/src/wave_out.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/src/wave_out.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,71 @@
+/* Copyright (c) 2002, John Edwards
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+//    WAVE_OUT.H - Necessary stuff for WIN_AUDIO
+
+#ifndef WAVE_OUT_H
+#define WAVE_OUT_H
+
+#include <stdio.h>
+#include <windows.h>
+#ifdef __MINGW32__
+#include <mmsystem.h>
+#endif
+
+#define VERSION_STRING "\n 0.7.0\n"
+
+#define Cdecl               __cdecl
+#define __attribute__(x)
+#define sleep(__sec)        Sleep ((__sec) * 1000)
+#define inline              __inline
+#define restrict
+
+//// constants /////////////////////////////////////////////////////
+
+#define CD_SAMPLE_FREQ         44.1e3
+#define SAMPLE_SIZE            16
+#define SAMPLE_SIZE_STRING     ""
+#define WINAUDIO_FD            ((FILE_T)-128)
+#define FILE_T                 FILE*
+#define INVALID_FILEDESC       NULL
+
+//// Simple types //////////////////////////////////////////////////
+
+typedef signed   int        Int;        // at least -32767...+32767, fast type
+typedef unsigned int        Uint;       // at least 0...65535, fast type
+typedef long double         Ldouble;    // most exact floating point format
+
+//// procedures/functions //////////////////////////////////////////
+// wave_out.c
+Int        Set_WIN_Params             ( FILE_T dummyFile , Ldouble SampleFreq, Uint BitsPerSample, Uint Channels);
+int        WIN_Play_Samples           ( const void* buff, size_t len );
+int        WIN_Audio_close            ( void );
+
+#endif /* WAVE_OUT_H */

Added: freeswitch/trunk/libs/speex/symbian/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/symbian/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,6 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+EXTRA_DIST = bld.inf  config.h  speex.mmp

Added: freeswitch/trunk/libs/speex/symbian/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/symbian/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,322 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = symbian
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = bld.inf  config.h  speex.mmp
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  symbian/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  symbian/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/symbian/bld.inf
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/symbian/bld.inf	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,35 @@
+/*
+   Copyright (C) 2003 Commonwealth Scientific and Industrial Research
+   Organisation (CSIRO) Australia
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   - Neither the name of CSIRO Australia nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+   PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE ORGANISATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+PRJ_MMPFILES
+
+speex.mmp

Added: freeswitch/trunk/libs/speex/symbian/config.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/symbian/config.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,57 @@
+/*
+   Copyright (C) 2003 Commonwealth Scientific and Industrial Research
+   Organisation (CSIRO) Australia
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   - Neither the name of CSIRO Australia nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+   PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE ORGANISATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* An inline macro is required for use of the inline keyword as not all C compilers support */
+/* inline.  It is officially C99 and C++ only */
+
+#ifdef __WINS__
+
+#define inline __inline
+
+/* Disable some pointless/stupid warnings */
+
+#pragma warning(disable: 4100) /* unreferenced formal parameter */
+#pragma warning(disable: 4127) /* conditional expression is constant */
+#pragma warning(disable: 4305) /* truncation from '...' to '...' */
+#pragma warning(disable: 4244) /* conversion from '...' to '...', possible loss of data */
+#pragma warning(disable: 4701) /* local variable may be be used without having been initialized */
+
+#endif /* ! __WINS__ */
+
+/* Use only fixed point arithmetic */
+
+#define FIXED_POINT 1
+
+#endif /* ! CONFIG_H */

Added: freeswitch/trunk/libs/speex/symbian/speex.mmp
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/symbian/speex.mmp	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,45 @@
+/*
+   Copyright (C) 2003 Commonwealth Scientific and Industrial Research
+   Organisation (CSIRO) Australia
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   - Neither the name of CSIRO Australia nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+   PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE ORGANISATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+TARGET        speex.lib
+TARGETTYPE    lib
+UID           0
+MACRO         HAVE_CONFIG_H
+SOURCEPATH    ..\libspeex
+SOURCE        bits.c cb_search.c exc_5_64_table.c exc_5_256_table.c exc_8_128_table.c
+SOURCE        exc_10_16_table.c exc_10_32_table.c exc_20_32_table.c filters.c gain_table.c
+SOURCE        gain_table_lbr.c hexc_10_32_table.c hexc_table.c high_lsp_tables.c jitter.c
+SOURCE        lbr_48k_tables.c lpc.c lsp.c lsp_tables_nb.c ltp.c math_approx.c mdf.c misc.c
+SOURCE        modes.c nb_celp.c preprocess.c quant_lsp.c sb_celp.c smallft.c
+SOURCE        speex.c speex_callbacks.c speex_header.c stereo.c vbr.c vq.c
+USERINCLUDE   . ..\include\speex
+SYSTEMINCLUDE \epoc32\include \epoc32\include\libc ..\include

Added: freeswitch/trunk/libs/speex/ti/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,9 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+SUBDIRS = speex_C54_test speex_C55_test speex_C64_test
+
+EXTRA_DIST = config.h testenc-TI-C5x.c user_misc.h testenc-TI-C64x.c
+

Added: freeswitch/trunk/libs/speex/ti/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,466 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = ti
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-exec-recursive install-info-recursive \
+	install-recursive installcheck-recursive installdirs-recursive \
+	pdf-recursive ps-recursive uninstall-info-recursive \
+	uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS = speex_C54_test speex_C55_test speex_C64_test
+EXTRA_DIST = config.h testenc-TI-C5x.c user_misc.h testenc-TI-C64x.c
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  ti/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  ti/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || mkdir "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="../$(top_distdir)" \
+	        distdir="../$(distdir)/$$subdir" \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
+	clean clean-generic clean-libtool clean-recursive ctags \
+	ctags-recursive distclean distclean-generic distclean-libtool \
+	distclean-recursive distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-exec install-exec-am install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic maintainer-clean-recursive \
+	mostlyclean mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/ti/config.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/config.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,73 @@
+/* Copyright (C) 2005 Psi Systems, Inc.
+   File: config.h
+   Main Speex option include file for TI C64xx, C54xx and C55xx processors
+   for use with TI Code Composer (TM) DSP development tools.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#define FIXED_POINT
+#define FRAME_SIZE 160
+#define DISABLE_WIDEBAND
+
+/* Allow for 2 20ms narrowband blocks per frame, plus a couple of bytes */
+#define MAX_CHARS_PER_FRAME (42/BYTES_PER_CHAR)
+
+/* for debug */
+#undef DECODE_ONLY
+
+/* EITHER    Allocate from fixed array (C heap not used) */
+/*           Enable VERBOSE_ALLOC to see how much is used */
+#define MANUAL_ALLOC
+#define USER_MISC
+#define VERBOSE_ALLOC
+/* OR        Use CALLOC (heap size must be increased in linker command file) */
+//#undef MANUAL_ALLOC
+//#undef USER_MISC
+
+#if defined (CONFIG_TI_C54X) || defined (CONFIG_TI_C55X) 
+//#define PRECISION16
+
+// These values determined by analysis for 8kbps narrowband
+#define SPEEXENC_PERSIST_STACK_SIZE 5000
+#define SPEEXENC_SCRATCH_STACK_SIZE 3000
+#define SPEEXDEC_PERSIST_STACK_SIZE 2500
+#define SPEEXDEC_SCRATCH_STACK_SIZE 1000
+#else /* C6X */
+#define NO_LONGLONG
+
+#define SPEEXENC_PERSIST_STACK_SIZE 10000
+#define SPEEXENC_SCRATCH_STACK_SIZE 6000
+#define SPEEXDEC_PERSIST_STACK_SIZE 5000
+#define SPEEXDEC_SCRATCH_STACK_SIZE 2000
+#endif
+#define SPEEX_PERSIST_STACK_SIZE (SPEEXENC_PERSIST_STACK_SIZE + SPEEXDEC_PERSIST_STACK_SIZE)
+#define SPEEX_SCRATCH_STACK_SIZE SPEEXENC_SCRATCH_STACK_SIZE
+#define NB_ENC_STACK SPEEXENC_SCRATCH_STACK_SIZE
+#define NB_DEC_STACK SPEEXDEC_SCRATCH_STACK_SIZE
+

Added: freeswitch/trunk/libs/speex/ti/speex_C54_test/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/speex_C54_test/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,8 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+EXTRA_DIST = speex_C54_test.cmd  speex_C54_test.pjt
+
+

Added: freeswitch/trunk/libs/speex/ti/speex_C54_test/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/speex_C54_test/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,322 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = ti/speex_C54_test
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = speex_C54_test.cmd  speex_C54_test.pjt
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  ti/speex_C54_test/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  ti/speex_C54_test/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/ti/speex_C54_test/speex_C54_test.cmd
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/speex_C54_test/speex_C54_test.cmd	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,71 @@
+/* Copyright (C) 2005 Psi Systems, Inc.
+   File: speex_C54_test.cmd
+   Linker command file with memory allocation for TI TMS320VC5416 processor
+   for use with TI Code Composer (TM) DSP development tools.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+-c
+-stack 0x2000
+-heap 0x1000	/* If private memory allocation is used for Speex */
+/*-heap 0x6000	/* If calloc is used for Speex */
+-lrts_ext.lib
+
+MEMORY
+{
+/*   PAGE 0:   P_DARAM03:  origin = 0x80,          len = 0x7f00*/
+   PAGE 0:   P_DARAM03:  origin = 0x5000,          len = 0x2f80
+   PAGE 0:   VECT:       origin = 0x7f80,        len = 0x80
+   PAGE 0:   P_DARAM47:  origin = 0x18000,       len = 0x8000
+   PAGE 0:   SARAM03:    origin = 0x28000,       len = 0x8000
+   PAGE 0:   SARAM47:    origin = 0x38000,       len = 0x8000
+
+   PAGE 1:   USERREGS:   origin = 0x60,          len = 0x1a
+   PAGE 1:   BIOSREGS:   origin = 0x7c,          len = 0x4
+   PAGE 1:   CSLREGS:    origin = 0x7a,          len = 0x2
+            D_DARAM03:  origin = 0x80,          len = 0x4f80
+            D_DARAM47:  origin = 0x8000,        len = 0x8000
+}
+
+SECTIONS
+{
+    .vectors: {} > VECT PAGE 0
+    .bootmem: {rts_ext.lib (.text)} > P_DARAM03 PAGE 0 
+/*    .bootmem: {} > P_DARAM03 PAGE 0 */
+    .text:    {} > SARAM03 PAGE 0
+    .cinit:   {} > SARAM03 PAGE 0
+    .switch:  {} > SARAM03 PAGE 0
+    .bss:     {} > D_DARAM03 | D_DARAM47 PAGE 1
+    .far:     {} > D_DARAM03 | D_DARAM47  PAGE 1
+    .const:   {} > D_DARAM03 | D_DARAM47  PAGE 1
+    .sysmem:  {} > D_DARAM47 PAGE 1
+    .cio:     {} > D_DARAM03 | D_DARAM47  PAGE 1
+    .stack:   {} > D_DARAM03 | D_DARAM47  PAGE 1
+    .myheap:   {} > D_DARAM47 PAGE 1
+}

Added: freeswitch/trunk/libs/speex/ti/speex_C54_test/speex_C54_test.pjt
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/speex_C54_test/speex_C54_test.pjt	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,61 @@
+; Code Composer Project File, Version 2.0 (do not modify or remove this line)
+
+[Project Settings]
+ProjectDir="C:\speex_11234\ti\speex_C54_test\"
+ProjectType=Executable
+CPUFamily=TMS320C54XX
+Tool="Compiler"
+Tool="CustomBuilder"
+Tool="DspBiosBuilder"
+Tool="Linker"
+Config="Debug"
+Config="Release"
+
+[Source Files]
+Source="..\..\libspeex\bits.c"
+Source="..\..\libspeex\cb_search.c"
+Source="..\..\libspeex\exc_10_16_table.c"
+Source="..\..\libspeex\exc_10_32_table.c"
+Source="..\..\libspeex\exc_20_32_table.c"
+Source="..\..\libspeex\exc_5_256_table.c"
+Source="..\..\libspeex\exc_5_64_table.c"
+Source="..\..\libspeex\exc_8_128_table.c"
+Source="..\..\libspeex\filters.c"
+Source="..\..\libspeex\gain_table.c"
+Source="..\..\libspeex\gain_table_lbr.c"
+Source="..\..\libspeex\lpc.c"
+Source="..\..\libspeex\lsp.c"
+Source="..\..\libspeex\lsp_tables_nb.c"
+Source="..\..\libspeex\ltp.c"
+Source="..\..\libspeex\math_approx.c"
+Source="..\..\libspeex\misc.c"
+Source="..\..\libspeex\modes.c"
+Source="..\..\libspeex\nb_celp.c"
+Source="..\..\libspeex\quant_lsp.c"
+Source="..\..\libspeex\sb_celp.c"
+Source="..\..\libspeex\speex.c"
+Source="..\..\libspeex\speex_callbacks.c"
+Source="..\..\libspeex\vbr.c"
+Source="..\..\libspeex\vq.c"
+Source="..\..\libspeex\window.c"
+Source="..\..\ti\testenc-TI-C5x.c"
+Source="speex_C54_test.cmd"
+
+["Compiler" Settings: "Debug"]
+Options=-g -q -o3 -fr"..\ti\speex_C54_test\Debug" -i"..\ti" -i"..\include" -d"_DEBUG" -d"CONFIG_TI_C54X" -d"HAVE_CONFIG_H" -d"NO_LONGLONG" -mf -ms
+
+["Compiler" Settings: "Release"]
+Options=-q -o2 -fr"..\ti\speex_C54_test\Release" -i"..\ti" -i"..\include" -d"CONFIG_TI_C54X" -d"HAVE_CONFIG_H" -d"NO_LONGLONG" -mf -ms
+
+["DspBiosBuilder" Settings: "Debug"]
+Options=-v54
+
+["DspBiosBuilder" Settings: "Release"]
+Options=-v54
+
+["Linker" Settings: "Debug"]
+Options=-q -c -heap4096 -m".\Debug\speex_C54_test.map" -o".\Debug\speex_C54_test.out" -stack4096 -w -x
+
+["Linker" Settings: "Release"]
+Options=-q -c -m".\Release\speex_C54_test.map" -o".\Release\speex_C54_test.out" -w -x
+

Added: freeswitch/trunk/libs/speex/ti/speex_C55_test/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/speex_C55_test/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,6 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+EXTRA_DIST = speex_C55_test.cmd  speex_C55_test.pjt

Added: freeswitch/trunk/libs/speex/ti/speex_C55_test/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/speex_C55_test/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,322 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = ti/speex_C55_test
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = speex_C55_test.cmd  speex_C55_test.pjt
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  ti/speex_C55_test/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  ti/speex_C55_test/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/ti/speex_C55_test/speex_C55_test.cmd
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/speex_C55_test/speex_C55_test.cmd	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,65 @@
+/* Copyright (C) 2005 Psi Systems, Inc.
+   File: speex_C55_test.cmd
+   Linker command file with memory allocation for TI TMS320VC5509A processor
+   for use with TI Code Composer (TM) DSP development tools.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+-c
+-stack 0x1c00
+-heap 0x1000	/* If private memory allocation is used for Speex */
+/*-heap 0x6000	/ * If calloc is used for Speex */
+-sysstack 0x200
+-lrts55.lib
+
+MEMORY
+{
+   DARAM:      origin = 0x200,         len = 0x7e00
+   DARAM_B:    origin = 0x8000,        len = 0x8000
+   VECT:       origin = 0x100,         len = 0x100
+   SARAM_A:    origin = 0x10000,       len = 0x10000
+   SARAM_B:    origin = 0x20000,       len = 0x20000
+}
+
+SECTIONS
+{
+    .vectors: {} > VECT
+    .bootmem: {} > DARAM
+    .text:    {} > SARAM_B
+    .cinit:   {} > SARAM_B
+    .switch:  {} > SARAM_B
+    .bss:     {} > DARAM
+/*    .far:     {} > DARAM*/
+    .const:   {} > DARAM
+    .sysmem:  {} > DARAM_B
+    .cio:     {} > DARAM
+    .stack:   {} > DARAM
+    .sysstack:   {} > DARAM
+    .myheap:   {} > SARAM_A
+}

Added: freeswitch/trunk/libs/speex/ti/speex_C55_test/speex_C55_test.pjt
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/speex_C55_test/speex_C55_test.pjt	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,61 @@
+; Code Composer Project File, Version 2.0 (do not modify or remove this line)
+
+[Project Settings]
+ProjectDir="C:\speex_11234\ti\speex_C55_test\"
+ProjectType=Executable
+CPUFamily=TMS320C55XX
+Tool="Compiler"
+Tool="CustomBuilder"
+Tool="DspBiosBuilder"
+Tool="Linker"
+Config="Debug"
+Config="Release"
+
+[Source Files]
+Source="..\..\libspeex\bits.c"
+Source="..\..\libspeex\cb_search.c"
+Source="..\..\libspeex\exc_10_16_table.c"
+Source="..\..\libspeex\exc_10_32_table.c"
+Source="..\..\libspeex\exc_20_32_table.c"
+Source="..\..\libspeex\exc_5_256_table.c"
+Source="..\..\libspeex\exc_5_64_table.c"
+Source="..\..\libspeex\exc_8_128_table.c"
+Source="..\..\libspeex\filters.c"
+Source="..\..\libspeex\gain_table.c"
+Source="..\..\libspeex\gain_table_lbr.c"
+Source="..\..\libspeex\lpc.c"
+Source="..\..\libspeex\lsp.c"
+Source="..\..\libspeex\lsp_tables_nb.c"
+Source="..\..\libspeex\ltp.c"
+Source="..\..\libspeex\math_approx.c"
+Source="..\..\libspeex\misc.c"
+Source="..\..\libspeex\modes.c"
+Source="..\..\libspeex\nb_celp.c"
+Source="..\..\libspeex\quant_lsp.c"
+Source="..\..\libspeex\sb_celp.c"
+Source="..\..\libspeex\speex.c"
+Source="..\..\libspeex\speex_callbacks.c"
+Source="..\..\libspeex\vbr.c"
+Source="..\..\libspeex\vq.c"
+Source="..\..\libspeex\window.c"
+Source="..\..\ti\testenc-TI-C5x.c"
+Source="speex_C55_test.cmd"
+
+["Compiler" Settings: "Debug"]
+Options=-g -q -o3 -fr"..\ti\speex_C55_test\Debug" -i"..\ti" -i"..\include" -d"_DEBUG" -d"CONFIG_TI_C55X" -d"HAVE_CONFIG_H" -mn
+
+["Compiler" Settings: "Release"]
+Options=-q -o2 -fr"..\ti\speex_C55_test\Release" -i"..\ti" -i"..\include" -d"CONFIG_TI_C55X" -d"HAVE_CONFIG_H" -mn
+
+["DspBiosBuilder" Settings: "Debug"]
+Options=-v55
+
+["DspBiosBuilder" Settings: "Release"]
+Options=-v55
+
+["Linker" Settings: "Debug"]
+Options=-q -c -m".\Debug\speex_C55_test.map" -o".\Debug\speex_C55_test.out" -w -x
+
+["Linker" Settings: "Release"]
+Options=-q -c -m".\Release\speex_C55_test.map" -o".\Release\speex_C55_test.out" -w -x
+

Added: freeswitch/trunk/libs/speex/ti/speex_C64_test/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/speex_C64_test/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,6 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+EXTRA_DIST = speex_C64_test.cmd  speex_C64_test.pjt

Added: freeswitch/trunk/libs/speex/ti/speex_C64_test/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/speex_C64_test/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,322 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = ti/speex_C64_test
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = speex_C64_test.cmd  speex_C64_test.pjt
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  ti/speex_C64_test/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  ti/speex_C64_test/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/ti/speex_C64_test/speex_C64_test.cmd
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/speex_C64_test/speex_C64_test.cmd	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,59 @@
+/* Copyright (C) 2005 Psi Systems, Inc.
+   File: speex_C64_test.cmd
+   Linker command file with memory allocation for TI TMS320C6415 processor
+   for use with TI Code Composer (TM) DSP development tools.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+-stack 0x10000
+-heap 0x10000
+
+
+MEMORY 
+{
+   VECRAM       : origin = 0x0,         len = 0x200
+   IPRAM       : origin = 0x200,         len = 0x40000
+   IDRAM       : origin = 0x80000,  len = 0x70000
+}
+
+SECTIONS
+{
+        .vectors > VECRAM
+        .text    > IPRAM
+
+        .bss     > IDRAM
+        .cinit   > IDRAM
+        .const   > IDRAM
+        .far     > IDRAM
+        .stack   > IDRAM
+        .cio     > IDRAM
+        .sysmem  > IDRAM
+        .switch  > IDRAM
+        .myheap  > IDRAM
+}

Added: freeswitch/trunk/libs/speex/ti/speex_C64_test/speex_C64_test.pjt
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/speex_C64_test/speex_C64_test.pjt	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,62 @@
+; Code Composer Project File, Version 2.0 (do not modify or remove this line)
+
+[Project Settings]
+ProjectDir="C:\speex_11234\ti\speex_C64_test\"
+ProjectType=Executable
+CPUFamily=TMS320C64XX
+Tool="Compiler"
+Tool="CustomBuilder"
+Tool="DspBiosBuilder"
+Tool="Linker"
+Config="Debug"
+Config="Release"
+
+[Source Files]
+Source="..\..\..\CCStudio_v3.1\C6000\cgtools\lib\rts6400.lib"
+Source="..\..\libspeex\bits.c"
+Source="..\..\libspeex\cb_search.c"
+Source="..\..\libspeex\exc_10_16_table.c"
+Source="..\..\libspeex\exc_10_32_table.c"
+Source="..\..\libspeex\exc_20_32_table.c"
+Source="..\..\libspeex\exc_5_256_table.c"
+Source="..\..\libspeex\exc_5_64_table.c"
+Source="..\..\libspeex\exc_8_128_table.c"
+Source="..\..\libspeex\filters.c"
+Source="..\..\libspeex\gain_table.c"
+Source="..\..\libspeex\gain_table_lbr.c"
+Source="..\..\libspeex\lpc.c"
+Source="..\..\libspeex\lsp.c"
+Source="..\..\libspeex\lsp_tables_nb.c"
+Source="..\..\libspeex\ltp.c"
+Source="..\..\libspeex\math_approx.c"
+Source="..\..\libspeex\misc.c"
+Source="..\..\libspeex\modes.c"
+Source="..\..\libspeex\nb_celp.c"
+Source="..\..\libspeex\quant_lsp.c"
+Source="..\..\libspeex\sb_celp.c"
+Source="..\..\libspeex\speex.c"
+Source="..\..\libspeex\speex_callbacks.c"
+Source="..\..\libspeex\vbr.c"
+Source="..\..\libspeex\vq.c"
+Source="..\..\libspeex\window.c"
+Source="..\testenc-TI-C64x.c"
+Source="speex_C64_test.cmd"
+
+["Compiler" Settings: "Debug"]
+Options=-g -o3 -fr"$(Proj_dir)\Debug" -i"..\ti" -i"..\include" -d"_DEBUG" -d"CONFIG_TI_C6X" -d"HAVE_CONFIG_H" -mv6400
+
+["Compiler" Settings: "Release"]
+Options=-o3 -fr"$(Proj_dir)\Release" -i"..\ti" -i"..\include" -d"HAVE_CONFIG_H" -mv6400
+
+["DspBiosBuilder" Settings: "Debug"]
+Options=-v6x
+
+["DspBiosBuilder" Settings: "Release"]
+Options=-v6x
+
+["Linker" Settings: "Debug"]
+Options=-c -m".\Debug\speex_C64_test.map" -o".\Debug\speex_C64_test.out" -w -x
+
+["Linker" Settings: "Release"]
+Options=-c -m".\Release\speex_C64_test.map" -o".\Release\speex_C64_test.out" -w -x
+

Added: freeswitch/trunk/libs/speex/ti/testenc-TI-C5x.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/testenc-TI-C5x.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,287 @@
+/* Copyright (C) 2005 Psi Systems, Inc.
+   File: testenc-TI-C5x.c
+   Encoder/Decoder Loop Main file for TI C54xx and C55xx processors
+   for use with TI Code Composer (TM) DSP development tools.
+   Modified from speexlib/testenc.c
+
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+/* Modified from speexlib/testenc.c for Code Composer simulator */
+
+#include <speex/speex.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <speex/speex_callbacks.h>
+#include <..\libspeex\arch.h>
+
+#undef DECODE_ONLY
+#define CHECK_RESULT  /* Compares original file with encoded/decoder file */
+#define TESTENC_BYTES_PER_FRAME 20  /* 8kbps */
+#define TESTENC_QUALITY 4 /* 8kbps */
+//#define TESTENC_BYTES_PER_FRAME 28  /* 11kbps */
+//#define TESTENC_QUALITY 5	      /* 11 kbps */
+
+/* For narrowband, QUALITY maps to these bit rates (see modes.c, manual.pdf) 
+ *   {1, 8, 2, 3, 3, 4, 4, 5, 5, 6, 7}
+ * 0 -> 2150
+ * 1 -> 3950
+ * 2 -> 5950
+ * 3 -> 8000
+ * 4 -> 8000
+ * 5 -> 11000
+ * 6 -> 11000
+ * 7 -> 15000
+ * 8 -> 15000
+ * 9 -> 18200
+ *10 -> 26400  */
+
+#ifdef FIXED_DEBUG
+extern long long spx_mips;
+#endif
+#include <math.h>
+
+#ifdef MANUAL_ALLOC
+/* Take all Speex space from this private heap */ 
+/* This is useful for multichannel applications */
+#pragma DATA_SECTION(spxHeap, ".myheap"); 
+static char spxHeap[SPEEX_PERSIST_STACK_SIZE];
+
+#pragma DATA_SECTION(spxScratch, ".myheap"); 
+static char spxScratch[SPEEX_SCRATCH_STACK_SIZE];
+
+char *spxGlobalHeapPtr, *spxGlobalHeapEnd;
+char *spxGlobalScratchPtr, *spxGlobalScratchEnd;
+#endif
+
+void byte2word(short* pInBuf, short* pOutBuf, int nWords)
+{
+   short *pIn, *pOut, sNext;
+   int i;
+   
+   pIn = pInBuf;
+   pOut = pOutBuf;
+   for(i=0;i<nWords;i++)
+   {
+      sNext = *pIn++;			// Get low byte
+      *pOut++ = (sNext & 0x00ff) | (*pIn++ << 8);	// insert high byte
+   }
+}
+   
+void word2byte(short* pInBuf, short* pOutBuf, int nWords)
+{
+   short *pIn, *pOut;
+   int i;
+   
+   pIn = pInBuf;
+   pOut = pOutBuf;
+   for(i=0;i<nWords;i++)
+   {
+      *pOut++ = *pIn & 0x00ff;	// Get low byte
+      *pOut++ = (short) ((unsigned short) *pIn++ >> 8);
+   }
+}
+   
+void main()
+{
+   char *outFile, *bitsFile;
+   FILE *fout, *fbits=NULL;
+#if !defined(DECODE_ONLY) || defined(CHECK_RESULT)
+   char *inFile;
+   FILE *fin;
+   short in_short[FRAME_SIZE];
+#endif
+   short out_short[FRAME_SIZE];
+   short inout_byte[2*FRAME_SIZE];
+#ifndef DECODE_ONLY
+   int nbChars;
+#endif
+#ifdef CHECK_RESULT
+   float sigpow,errpow,snr, seg_snr=0;
+   int snr_frames = 0;
+   int i;
+#endif
+   char cbits[TESTENC_BYTES_PER_FRAME/2 + 2];  /* temp store for encoded data */
+   void *st;
+   void *dec;
+   SpeexBits bits;
+   spx_int32_t tmp;
+   unsigned long bitCount=0;
+   spx_int32_t skip_group_delay;
+   SpeexCallback callback;
+
+   /* C54xx defaults to max wait states, even for parts like C5416 with 
+      larger internal memory.  Need to force the wait state register to zero */
+
+#ifdef CONFIG_TI_C54X
+   asm("	STM	#0,SWWSR");
+#endif
+
+#ifdef CHECK_RESULT
+   sigpow = 0;
+   errpow = 0;
+#endif
+
+#ifdef MANUAL_ALLOC
+	spxGlobalHeapPtr = spxHeap;
+	spxGlobalHeapEnd = spxHeap + sizeof(spxHeap);
+
+	spxGlobalScratchPtr = spxScratch;
+	spxGlobalScratchEnd = spxScratch + sizeof(spxScratch);
+#endif
+   st = speex_encoder_init(&speex_nb_mode);
+#ifdef MANUAL_ALLOC
+	spxGlobalScratchPtr = spxScratch;		/* Reuse scratch for decoder */
+#endif
+   dec = speex_decoder_init(&speex_nb_mode);
+
+   callback.callback_id = SPEEX_INBAND_CHAR;
+   callback.func = speex_std_char_handler;
+   callback.data = stderr;
+   speex_decoder_ctl(dec, SPEEX_SET_HANDLER, &callback);
+
+   callback.callback_id = SPEEX_INBAND_MODE_REQUEST;
+   callback.func = speex_std_mode_request_handler;
+   callback.data = st;
+   speex_decoder_ctl(dec, SPEEX_SET_HANDLER, &callback);
+
+   tmp=0;
+   speex_decoder_ctl(dec, SPEEX_SET_ENH, &tmp);
+   tmp=0;
+   speex_encoder_ctl(st, SPEEX_SET_VBR, &tmp);
+   tmp=TESTENC_QUALITY;
+   speex_encoder_ctl(st, SPEEX_SET_QUALITY, &tmp);
+   tmp=1;  /* Lowest */
+   speex_encoder_ctl(st, SPEEX_SET_COMPLEXITY, &tmp);
+
+   speex_encoder_ctl(st, SPEEX_GET_LOOKAHEAD, &skip_group_delay);
+   speex_decoder_ctl(dec, SPEEX_GET_LOOKAHEAD, &tmp);
+   skip_group_delay += tmp;
+   fprintf (stderr, "decoder lookahead = %d\n", skip_group_delay);
+
+#ifdef DECODE_ONLY
+   bitsFile = "c:\\speextrunktest\\samples\\malebitsin.dat";
+   fbits = fopen(bitsFile, "rb");
+#else
+   bitsFile = "c:\\speextrunktest\\samples\\malebits5x.dat";
+   fbits = fopen(bitsFile, "wb");
+#endif
+#if !defined(DECODE_ONLY) || defined(CHECK_RESULT)
+   inFile = "c:\\speextrunktest\\samples\\male.snd";
+   fin = fopen(inFile, "rb");
+#endif
+   outFile = "c:\\speextrunktest\\samples\\maleout5x.snd";
+   fout = fopen(outFile, "wb+");
+ 
+   speex_bits_init(&bits);
+#ifndef DECODE_ONLY
+   while (!feof(fin))
+   {
+      fread(inout_byte, 2, FRAME_SIZE, fin);
+      byte2word(inout_byte, in_short, FRAME_SIZE);  /* C5x has 16-bit char */
+
+      if (feof(fin))
+         break;
+      speex_bits_reset(&bits);
+
+      speex_encode_int(st, in_short, &bits);
+      nbChars = speex_bits_write(&bits, cbits, 
+                         sizeof(cbits)*BYTES_PER_CHAR) /BYTES_PER_CHAR;
+      bitCount+=bits.nbBits;
+
+      word2byte((short *) cbits, inout_byte, nbChars);
+      fwrite(inout_byte, 2, nbChars, fbits);
+      speex_bits_rewind(&bits);
+
+#else /* DECODE_ONLY */
+   while (!feof(fbits))
+   {
+      fread(inout_byte, 1, TESTENC_BYTES_PER_FRAME, fbits);
+
+      if (feof(fbits))
+         break;
+
+      byte2word(inout_byte, (short *)cbits, TESTENC_BYTES_PER_FRAME/2);
+      speex_bits_read_from(&bits, cbits, TESTENC_BYTES_PER_FRAME);
+      bitCount+=160;
+#endif
+      speex_decode_int(dec, &bits, out_short);
+      speex_bits_reset(&bits);
+
+      word2byte(&out_short[skip_group_delay], inout_byte, FRAME_SIZE-skip_group_delay);
+      fwrite(inout_byte, 2, FRAME_SIZE-skip_group_delay, fout);
+      skip_group_delay = 0;
+#if 1
+   fprintf (stderr, "Bits so far: %lu \n", bitCount);
+#endif
+   }
+   fprintf (stderr, "Total encoded size: %lu bits\n", bitCount);
+   speex_encoder_destroy(st);
+   speex_decoder_destroy(dec);
+
+#ifdef CHECK_RESULT
+   rewind(fin);
+   rewind(fout);
+
+   while ( FRAME_SIZE == fread(inout_byte, 2, FRAME_SIZE, fin)) 
+   {
+	float s=0, e=0;
+
+    byte2word(inout_byte, in_short, FRAME_SIZE);
+    fread(inout_byte, 2, FRAME_SIZE, fout);
+    byte2word(inout_byte, out_short, FRAME_SIZE);
+
+        for (i=0;i<FRAME_SIZE;++i) {
+            s += (float)in_short[i] * in_short[i];
+            e += ((float)in_short[i]-out_short[i]) * ((float)in_short[i]-out_short[i]);
+        }
+	seg_snr += 10*log10((s+160)/(e+160));
+	sigpow += s;
+	errpow += e;
+	snr_frames++;
+   }
+
+   snr = 10 * log10( sigpow / errpow );
+   seg_snr /= snr_frames;
+   fprintf(stderr,"SNR = %f\nsegmental SNR = %f\n",snr, seg_snr);
+
+#ifdef FIXED_DEBUG
+   printf ("Total: %f MIPS\n", (float)(1e-6*50*spx_mips/snr_frames));
+#endif
+#endif /* CHECK_RESULT */
+#if !defined(DECODE_ONLY) || defined(CHECK_RESULT)
+   fclose(fin);
+#endif
+   fclose(fout);
+   fclose(fbits);
+}

Added: freeswitch/trunk/libs/speex/ti/testenc-TI-C64x.c
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/testenc-TI-C64x.c	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,242 @@
+/* Copyright (C) 2005 Psi Systems, Inc.
+   Author:  Jean-Marc Valin 
+   File: testenc-TI-C64x.c
+   Encoder/Decoder Loop Main file for TI TMS320C64xx processor
+   for use with TI Code Composer (TM) DSP development tools.
+   Modified from speexlib/testenc.c
+
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <speex/speex.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <speex/speex_callbacks.h>
+
+#undef DECODE_ONLY
+#define CHECK_RESULT  /* Compares original file with encoded/decoder file */
+#define TESTENC_BYTES_PER_FRAME 20  /* 8kbps */
+#define TESTENC_QUALITY 4 /* 8kbps */
+//#define TESTENC_BYTES_PER_FRAME 28  /* 11kbps */
+//#define TESTENC_QUALITY 5	      /* 11 kbps */
+
+/* For narrowband, QUALITY maps to these bit rates (see modes.c, manual.pdf) 
+ *   {1, 8, 2, 3, 3, 4, 4, 5, 5, 6, 7}
+ * 0 -> 2150
+ * 1 -> 3950
+ * 2 -> 5950
+ * 3 -> 8000
+ * 4 -> 8000
+ * 5 -> 11000
+ * 6 -> 11000
+ * 7 -> 15000
+ * 8 -> 15000
+ * 9 -> 18200
+ *10 -> 26400  */
+
+#ifdef FIXED_DEBUG
+extern long long spx_mips;
+#endif
+
+#ifdef MANUAL_ALLOC
+/* Take all Speex space from this private heap */ 
+/* This is useful for multichannel applications */
+#pragma DATA_SECTION(spxHeap, ".myheap"); 
+static char spxHeap[SPEEX_PERSIST_STACK_SIZE];
+
+#pragma DATA_SECTION(spxScratch, ".myheap"); 
+static char spxScratch[SPEEX_SCRATCH_STACK_SIZE];
+
+char *spxGlobalHeapPtr, *spxGlobalHeapEnd;
+char *spxGlobalScratchPtr, *spxGlobalScratchEnd;
+#endif    /* MANUAL_ALLOC */
+
+#include <math.h>
+void main()
+{
+   char *outFile, *bitsFile;
+   FILE *fout, *fbits=NULL;
+#if !defined(DECODE_ONLY) || defined(CHECK_RESULT)
+   char *inFile;
+   FILE *fin;
+   short in_short[FRAME_SIZE];
+#endif
+   short out_short[FRAME_SIZE];
+#ifndef DECODE_ONLY
+   int nbBits;
+#endif
+#ifdef CHECK_RESULT
+   float sigpow,errpow,snr, seg_snr=0;
+   int snr_frames = 0;
+   int i;
+#endif
+   char cbits[200];
+   void *st;
+   void *dec;
+   SpeexBits bits;
+   spx_int32_t tmp;
+   unsigned long bitCount=0;
+   spx_int32_t skip_group_delay;
+   SpeexCallback callback;
+
+#ifdef CHECK_RESULT
+   sigpow = 0;
+   errpow = 0;
+#endif
+
+#ifdef MANUAL_ALLOC
+	spxGlobalHeapPtr = spxHeap;
+	spxGlobalHeapEnd = spxHeap + sizeof(spxHeap);
+
+	spxGlobalScratchPtr = spxScratch;
+	spxGlobalScratchEnd = spxScratch + sizeof(spxScratch);
+#endif
+   st = speex_encoder_init(&speex_nb_mode);
+#ifdef MANUAL_ALLOC
+	spxGlobalScratchPtr = spxScratch;		/* Reuse scratch for decoder */
+#endif
+   dec = speex_decoder_init(&speex_nb_mode);
+
+   callback.callback_id = SPEEX_INBAND_CHAR;
+   callback.func = speex_std_char_handler;
+   callback.data = stderr;
+   speex_decoder_ctl(dec, SPEEX_SET_HANDLER, &callback);
+
+   callback.callback_id = SPEEX_INBAND_MODE_REQUEST;
+   callback.func = speex_std_mode_request_handler;
+   callback.data = st;
+   speex_decoder_ctl(dec, SPEEX_SET_HANDLER, &callback);
+
+   tmp=0;
+   speex_decoder_ctl(dec, SPEEX_SET_ENH, &tmp);
+   tmp=0;
+   speex_encoder_ctl(st, SPEEX_SET_VBR, &tmp);
+   tmp=TESTENC_QUALITY;
+   speex_encoder_ctl(st, SPEEX_SET_QUALITY, &tmp);
+   tmp=1;  /* Lowest */
+   speex_encoder_ctl(st, SPEEX_SET_COMPLEXITY, &tmp);
+
+   speex_encoder_ctl(st, SPEEX_GET_LOOKAHEAD, &skip_group_delay);
+   speex_decoder_ctl(dec, SPEEX_GET_LOOKAHEAD, &tmp);
+   skip_group_delay += tmp;
+   fprintf (stderr, "decoder lookahead = %d\n", skip_group_delay);
+
+#ifdef DECODE_ONLY
+   bitsFile = "c:\\speextrunktest\\samples\\malebitsin.dat";
+   fbits = fopen(bitsFile, "rb");
+#else
+   bitsFile = "c:\\speextrunktest\\samples\\malebits6x.dat";
+   fbits = fopen(bitsFile, "wb");
+#endif
+#if !defined(DECODE_ONLY) || defined(CHECK_RESULT)
+   inFile = "c:\\speextrunktest\\samples\\male.snd";
+   fin = fopen(inFile, "rb");
+#endif
+   outFile = "c:\\speextrunktest\\samples\\maleout6x.snd";
+   fout = fopen(outFile, "wb+");
+ 
+   speex_bits_init(&bits);
+#ifndef DECODE_ONLY
+   while (!feof(fin))
+   {
+      fread(in_short, sizeof(short), FRAME_SIZE, fin);
+      if (feof(fin))
+         break;
+      speex_bits_reset(&bits);
+
+      speex_encode_int(st, in_short, &bits);
+      nbBits = speex_bits_write(&bits, cbits, 200);
+      bitCount+=bits.nbBits;
+
+      fwrite(cbits, 1, nbBits, fbits);
+      speex_bits_rewind(&bits);
+
+#else /* DECODE_ONLY */
+   while (!feof(fbits))
+   {
+      fread(cbits, 1, TESTENC_BYTES_PER_FRAME, fbits);
+
+      if (feof(fbits))
+         break;
+
+      speex_bits_read_from(&bits, cbits, TESTENC_BYTES_PER_FRAME);
+//      bitCount+=160;  /* only correct for 8kbps, but just for the printf */
+      bitCount+=bits.nbBits;
+#endif
+      
+      speex_decode_int(dec, &bits, out_short);
+      speex_bits_reset(&bits);
+
+      fwrite(&out_short[skip_group_delay], sizeof(short), FRAME_SIZE-skip_group_delay, fout);
+      skip_group_delay = 0;
+#if 1
+   fprintf (stderr, "Bits so far: %lu \n", bitCount);
+#endif
+   }
+   fprintf (stderr, "Total encoded size: %lu bits\n", bitCount);
+   speex_encoder_destroy(st);
+   speex_decoder_destroy(dec);
+
+#ifdef CHECK_RESULT 
+   rewind(fin);
+   rewind(fout);
+
+   while ( FRAME_SIZE == fread(in_short, sizeof(short), FRAME_SIZE, fin) 
+           &&
+           FRAME_SIZE ==  fread(out_short, sizeof(short), FRAME_SIZE,fout) )
+   {
+	float s=0, e=0;
+        for (i=0;i<FRAME_SIZE;++i) {
+            s += (float)in_short[i] * in_short[i];
+            e += ((float)in_short[i]-out_short[i]) * ((float)in_short[i]-out_short[i]);
+        }
+	seg_snr += 10*log10((s+160)/(e+160));
+	sigpow += s;
+	errpow += e;
+	snr_frames++;
+   }
+
+   snr = 10 * log10( sigpow / errpow );
+   seg_snr /= snr_frames;
+   fprintf(stderr,"SNR = %f\nsegmental SNR = %f\n",snr, seg_snr);
+
+#ifdef FIXED_DEBUG
+   printf ("Total: %f MIPS\n", (float)(1e-6*50*spx_mips/snr_frames));
+#endif
+#endif /* CHECK_RESULT */
+#if !defined(DECODE_ONLY) || defined(CHECK_RESULT)
+   fclose(fin);
+#endif
+   fclose(fout);
+   fclose(fbits);
+}

Added: freeswitch/trunk/libs/speex/ti/user_misc.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/ti/user_misc.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,127 @@
+/* Copyright (C) 2005 Psi Systems, Inc.
+   Author:  Jean-Marc Valin 
+   File: user_misc.h
+   Memory Allocation overrides to allow user control rather than C alloc/free.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the Xiph.org Foundation nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef MANUAL_ALLOC
+
+/* To avoid changing the Speex call model, this file relies on four static variables 
+   The user main creates two linear buffers, and initializes spxGlobalHeap/ScratchPtr 
+   to point to the start of the two buffers, and initializes spxGlobalHeap/ScratchEnd 
+   to point to the first address following the last byte of the two buffers.
+   
+   This mechanism allows, for example, data caching for multichannel applications, 
+   where the Speex state is swapped from a large slow memory to a small fast memory 
+   each time the codec runs.
+   
+   Persistent data is allocated in spxGlobalHeap (instead of calloc), while scratch
+   data is allocated in spxGlobalScratch.
+*/
+
+extern char *spxGlobalHeapPtr, *spxGlobalHeapEnd; 
+extern char *spxGlobalScratchPtr, *spxGlobalScratchEnd;
+
+/* Make sure that all structures are aligned to largest type */
+#define BLOCK_MASK      (sizeof(long double)-1)
+
+#define OVERRIDE_SPEEX_ALLOC
+void *speex_alloc (int size)
+{
+    void *ptr;
+    
+    ptr = (void *) (((int)spxGlobalHeapPtr + BLOCK_MASK) & ~BLOCK_MASK);  //Start on 8 boundary
+
+    spxGlobalHeapPtr = (char *)((int)ptr + size);	// Update pointer to next free location
+
+    if (spxGlobalHeapPtr > spxGlobalHeapEnd ) 
+    {
+#ifdef VERBOSE_ALLOC
+	    fprintf (stderr, "insufficient space for persistent alloc request %d bytes\n", size);
+#endif
+       return 0;
+    }
+   
+#ifdef VERBOSE_ALLOC
+    fprintf (stderr, "Persist Allocated %d chars at %x, %d remaining\n", size, ptr, ((int)spxGlobalHeapEnd - (int)spxGlobalHeapPtr));
+#endif
+    memset(ptr, 0, size);
+    return ptr;
+}
+
+#define OVERRIDE_SPEEX_ALLOC_SCRATCH
+void *speex_alloc_scratch (int size)
+{
+    void *ptr;
+
+    ptr = (void *) (((int)spxGlobalScratchPtr + BLOCK_MASK) & ~BLOCK_MASK);  //Start on 8 boundary
+
+    spxGlobalScratchPtr = (char *)((int)ptr + size);	// Update pointer to next free location
+
+    if (spxGlobalScratchPtr > spxGlobalScratchEnd ) 
+    {
+#ifdef VERBOSE_ALLOC
+	    fprintf (stderr, "insufficient space for scratch alloc request %d bytes\n", size);
+#endif
+       return 0;
+    }
+   
+#ifdef VERBOSE_ALLOC
+    fprintf (stderr, "Scratch Allocated %d chars at %x, %d remaining\n", size, ptr, ((int)spxGlobalScratchEnd - (int)spxGlobalScratchPtr));
+#endif
+    memset(ptr, 0, size);
+    return ptr;
+}
+
+#define OVERRIDE_SPEEX_REALLOC
+void *speex_realloc (void *ptr, int size)
+{
+#ifdef VERBOSE_ALLOC
+   speex_warning("realloc attempted, not allowed");
+#endif
+   return 0;
+}
+
+#define OVERRIDE_SPEEX_FREE
+void speex_free (void *ptr)
+{
+#ifdef VERBOSE_ALLOC
+   speex_warning("at speex_free");
+#endif
+}
+#define OVERRIDE_SPEEX_FREE_SCRATCH
+void speex_free_scratch (void *ptr)
+{
+#ifdef VERBOSE_ALLOC
+   speex_warning("at speex_free_scratch");
+#endif
+}
+
+#endif    /* !MANUAL_ALLOC */

Added: freeswitch/trunk/libs/speex/win32/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,8 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+SUBDIRS = libspeex speexenc speexdec VS2003 VS2005
+
+EXTRA_DIST = speex.iss config.h

Added: freeswitch/trunk/libs/speex/win32/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,466 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = win32
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-exec-recursive install-info-recursive \
+	install-recursive installcheck-recursive installdirs-recursive \
+	pdf-recursive ps-recursive uninstall-info-recursive \
+	uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS = libspeex speexenc speexdec VS2003 VS2005
+EXTRA_DIST = speex.iss config.h
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  win32/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  win32/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || mkdir "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="../$(top_distdir)" \
+	        distdir="../$(distdir)/$$subdir" \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
+	clean clean-generic clean-libtool clean-recursive ctags \
+	ctags-recursive distclean distclean-generic distclean-libtool \
+	distclean-recursive distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-exec install-exec-am install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic maintainer-clean-recursive \
+	mostlyclean mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/win32/VS2003/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2003/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,8 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+SUBDIRS = libspeex speexenc speexdec
+
+EXTRA_DIST = 

Added: freeswitch/trunk/libs/speex/win32/VS2003/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2003/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,466 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = win32/VS2003
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-exec-recursive install-info-recursive \
+	install-recursive installcheck-recursive installdirs-recursive \
+	pdf-recursive ps-recursive uninstall-info-recursive \
+	uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS = libspeex speexenc speexdec
+EXTRA_DIST = 
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  win32/VS2003/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  win32/VS2003/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || mkdir "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="../$(top_distdir)" \
+	        distdir="../$(distdir)/$$subdir" \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
+	clean clean-generic clean-libtool clean-recursive ctags \
+	ctags-recursive distclean distclean-generic distclean-libtool \
+	distclean-recursive distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-exec install-exec-am install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic maintainer-clean-recursive \
+	mostlyclean mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/win32/VS2003/libspeex/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2003/libspeex/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,8 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+EXTRA_DIST = libspeex.def libspeex.vcproj
+
+

Added: freeswitch/trunk/libs/speex/win32/VS2003/libspeex/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2003/libspeex/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,322 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = win32/VS2003/libspeex
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = libspeex.def libspeex.vcproj
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  win32/VS2003/libspeex/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  win32/VS2003/libspeex/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/win32/VS2003/libspeex/libspeex.def
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2003/libspeex/libspeex.def	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,108 @@
+LIBRARY libspeex
+EXPORTS
+
+
+;
+;	speex_echo.h
+;
+speex_echo_state_init
+speex_echo_state_destroy
+speex_echo_cancel
+speex_echo_state_reset
+
+;
+;	speex_preprocess.h
+;
+speex_preprocess_state_init
+speex_preprocess_state_destroy
+speex_preprocess
+speex_preprocess_estimate_update
+speex_preprocess_ctl
+
+;
+;	speex_bits.h
+;
+speex_bits_init
+speex_bits_init_buffer
+speex_bits_destroy
+speex_bits_reset
+speex_bits_rewind
+speex_bits_read_from
+speex_bits_read_whole_bytes
+speex_bits_write
+speex_bits_write_whole_bytes
+speex_bits_pack
+speex_bits_unpack_signed
+speex_bits_unpack_unsigned
+speex_bits_nbytes
+speex_bits_peek_unsigned
+speex_bits_peek
+speex_bits_advance
+speex_bits_remaining
+speex_bits_insert_terminator
+
+;
+;	speex_callbacks.h
+;
+speex_inband_handler
+speex_std_mode_request_handler
+speex_std_high_mode_request_handler
+speex_std_char_handler
+speex_default_user_handler
+speex_std_low_mode_request_handler
+speex_std_vbr_request_handler
+speex_std_enh_request_handler
+speex_std_vbr_quality_request_handler
+
+;
+;	speex_header.h
+;
+speex_init_header
+speex_header_to_packet
+speex_packet_to_header
+
+;
+;	speex_jitter.h
+;
+speex_jitter_init
+speex_jitter_destroy
+speex_jitter_put
+speex_jitter_get
+speex_jitter_get_pointer_timestamp
+
+;
+;	speex_noglobals.h
+;
+;speex_mode_new
+;speex_mode_destroy
+
+
+;
+;	speex_stereo.h
+;
+speex_encode_stereo
+speex_encode_stereo_int
+speex_decode_stereo
+speex_decode_stereo_int
+speex_std_stereo_request_handler
+
+;
+;	speex.h
+;
+speex_encoder_init
+speex_encoder_destroy
+speex_encode
+speex_encode_int
+speex_encoder_ctl
+speex_decoder_init
+speex_decoder_destroy
+speex_decode
+speex_decode_int
+speex_decoder_ctl
+speex_mode_query
+speex_lib_ctl
+speex_lib_get_mode
+
+
+
+

Added: freeswitch/trunk/libs/speex/win32/VS2003/libspeex/libspeex.vcproj
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2003/libspeex/libspeex.vcproj	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,481 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="7.10"
+	Name="libspeex"
+	ProjectGUID="{E972C52F-9E85-4D65-B19C-031E511E9DB4}"
+	Keyword="Win32Proj">
+	<Platforms>
+		<Platform
+			Name="Win32"/>
+	</Platforms>
+	<Configurations>
+		<Configuration
+			Name="Debug|Win32"
+			OutputDirectory="Debug"
+			IntermediateDirectory="Debug"
+			ConfigurationType="4"
+			CharacterSet="2">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;_DEBUG;_LIB;HAVE_CONFIG_H; USE_ALLOCA"
+				MinimalRebuild="TRUE"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="1"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="4"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win32"
+			OutputDirectory="Release"
+			IntermediateDirectory="Release"
+			ConfigurationType="4"
+			CharacterSet="2"
+			WholeProgramOptimization="TRUE">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				GlobalOptimizations="TRUE"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="TRUE"
+				FavorSizeOrSpeed="1"
+				OptimizeForProcessor="2"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_LIB;HAVE_CONFIG_H; USE_ALLOCA"
+				StringPooling="TRUE"
+				ExceptionHandling="FALSE"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="FALSE"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="3"
+				CompileAs="1"
+				DisableSpecificWarnings="4244;4305;4311;4100;4127"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="Release_SSE|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="4"
+			CharacterSet="2"
+			WholeProgramOptimization="TRUE">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				GlobalOptimizations="TRUE"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="TRUE"
+				FavorSizeOrSpeed="1"
+				OptimizeForProcessor="2"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_LIB;HAVE_CONFIG_H"
+				StringPooling="TRUE"
+				ExceptionHandling="FALSE"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="FALSE"
+				EnableEnhancedInstructionSet="1"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="3"
+				CompileAs="1"
+				DisableSpecificWarnings="4244;4305;4311;4100;4127"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="Release_SSE2|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="4"
+			CharacterSet="2"
+			WholeProgramOptimization="TRUE">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				GlobalOptimizations="TRUE"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="TRUE"
+				FavorSizeOrSpeed="1"
+				OptimizeForProcessor="3"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_LIB;HAVE_CONFIG_H"
+				StringPooling="TRUE"
+				ExceptionHandling="FALSE"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="FALSE"
+				EnableEnhancedInstructionSet="2"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="3"
+				CompileAs="1"
+				DisableSpecificWarnings="4244;4305;4311;4100;4127"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="Release_Dynamic|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="2"
+			CharacterSet="2"
+			WholeProgramOptimization="TRUE">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				GlobalOptimizations="TRUE"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="TRUE"
+				FavorSizeOrSpeed="1"
+				OptimizeForProcessor="2"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_LIB;HAVE_CONFIG_H"
+				StringPooling="TRUE"
+				ExceptionHandling="FALSE"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="FALSE"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="3"
+				CompileAs="1"
+				DisableSpecificWarnings="4244;4305;4311;4100;4127"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLinkerTool"
+				ModuleDefinitionFile="libspeex.def"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCWebDeploymentTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Source Files"
+			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm;asmx"
+			UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}">
+			<File
+				RelativePath="..\..\..\libspeex\bits.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\cb_search.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\exc_10_16_table.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\exc_10_32_table.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\exc_20_32_table.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\exc_5_256_table.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\exc_5_64_table.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\exc_8_128_table.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\filters.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\gain_table.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\gain_table_lbr.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\hexc_10_32_table.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\hexc_table.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\high_lsp_tables.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\jitter.c">
+			</File>
+			<File
+				RelativePath=".\libspeex.def">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\lpc.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\lsp.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\lsp_tables_nb.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\ltp.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\math_approx.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\mdf.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\medfilter.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\misc.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\modes.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\nb_celp.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\preprocess.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\quant_lsp.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\sb_celp.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\smallft.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\speex.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\speex_callbacks.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\speex_header.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\stereo.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\vbr.c">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\vq.c">
+			</File>
+		</Filter>
+		<Filter
+			Name="Header Files"
+			Filter="h;hpp;hxx;hm;inl;inc;xsd"
+			UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}">
+			<File
+				RelativePath="..\..\..\libspeex\cb_search.h">
+			</File>
+			<File
+				RelativePath="..\..\config.h">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\filters.h">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\filters_sse.h">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\lpc.h">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\lsp.h">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\ltp.h">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\ltp_sse.h">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\math_approx.h">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\misc.h">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\modes.h">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\nb_celp.h">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\quant_lsp.h">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\sb_celp.h">
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex.h">
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_bits.h">
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_callbacks.h">
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_echo.h">
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_header.h">
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_jitter.h">
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_noglobals.h">
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_preprocess.h">
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_stereo.h">
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_types.h">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\stack_alloc.h">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\vbr.h">
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\vq.h">
+			</File>
+		</Filter>
+		<Filter
+			Name="Resource Files"
+			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx"
+			UniqueIdentifier="{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}">
+		</Filter>
+		<File
+			RelativePath=".\ReadMe.txt">
+		</File>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>

Added: freeswitch/trunk/libs/speex/win32/VS2003/speexdec/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2003/speexdec/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,8 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+EXTRA_DIST = speexdec.vcproj
+
+

Added: freeswitch/trunk/libs/speex/win32/VS2003/speexdec/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2003/speexdec/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,322 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = win32/VS2003/speexdec
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = speexdec.vcproj
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  win32/VS2003/speexdec/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  win32/VS2003/speexdec/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/win32/VS2003/speexdec/speexdec.vcproj
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2003/speexdec/speexdec.vcproj	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,292 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="7.10"
+	Name="speexdec"
+	ProjectGUID="{961B8359-1393-4EF7-B8E0-67B6FE1C6DA8}"
+	Keyword="Win32Proj">
+	<Platforms>
+		<Platform
+			Name="Win32"/>
+	</Platforms>
+	<Configurations>
+		<Configuration
+			Name="Debug|Win32"
+			OutputDirectory="Debug"
+			IntermediateDirectory="Debug"
+			ConfigurationType="1"
+			CharacterSet="2">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..\include;..\..\..\..\libogg\include;..\..\..\libspeex;..\.."
+				PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;HAVE_CONFIG_H"
+				MinimalRebuild="TRUE"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="1"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="4"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="winmm.lib"
+				OutputFile="$(OutDir)/speexdec.exe"
+				LinkIncremental="2"
+				GenerateDebugInformation="TRUE"
+				ProgramDatabaseFile="$(OutDir)/speexenc.pdb"
+				SubSystem="1"
+				TargetMachine="1"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCWebDeploymentTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win32"
+			OutputDirectory="Release"
+			IntermediateDirectory="Release"
+			ConfigurationType="1"
+			CharacterSet="2"
+			WholeProgramOptimization="TRUE">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				GlobalOptimizations="TRUE"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="TRUE"
+				FavorSizeOrSpeed="1"
+				OptimizeForProcessor="2"
+				AdditionalIncludeDirectories="..\..\..\include;..\..\..\..\libogg\include;..\..\..\libspeex;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;HAVE_CONFIG_H"
+				StringPooling="TRUE"
+				ExceptionHandling="FALSE"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="FALSE"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="3"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="winmm.lib"
+				OutputFile="$(OutDir)/speexdec.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="TRUE"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCWebDeploymentTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="Release_SSE|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="1"
+			CharacterSet="2"
+			WholeProgramOptimization="TRUE">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				GlobalOptimizations="TRUE"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="TRUE"
+				FavorSizeOrSpeed="1"
+				OptimizeForProcessor="2"
+				AdditionalIncludeDirectories="..\..\..\include;..\..\..\..\libogg\include;..\..\..\libspeex;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;HAVE_CONFIG_H"
+				StringPooling="TRUE"
+				ExceptionHandling="FALSE"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="FALSE"
+				EnableEnhancedInstructionSet="1"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="3"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="winmm.lib"
+				OutputFile="$(OutDir)/speexdec.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="TRUE"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCWebDeploymentTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="Release_SSE2|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="1"
+			CharacterSet="2"
+			WholeProgramOptimization="TRUE">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				GlobalOptimizations="TRUE"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="TRUE"
+				FavorSizeOrSpeed="1"
+				OptimizeForProcessor="3"
+				AdditionalIncludeDirectories="..\..\..\include;..\..\..\..\libogg\include;..\..\..\libspeex;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;HAVE_CONFIG_H"
+				StringPooling="TRUE"
+				ExceptionHandling="FALSE"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="FALSE"
+				EnableEnhancedInstructionSet="2"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="3"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="winmm.lib"
+				OutputFile="$(OutDir)/speexdec.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="TRUE"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCWebDeploymentTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Source Files"
+			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm;asmx"
+			UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}">
+			<File
+				RelativePath="..\..\..\src\getopt.c">
+			</File>
+			<File
+				RelativePath="..\..\..\src\getopt1.c">
+			</File>
+			<File
+				RelativePath="..\..\..\src\speexdec.c">
+			</File>
+			<File
+				RelativePath="..\..\..\src\wav_io.c">
+			</File>
+			<File
+				RelativePath="..\..\..\src\wave_out.c">
+			</File>
+		</Filter>
+		<Filter
+			Name="Header Files"
+			Filter="h;hpp;hxx;hm;inl;inc;xsd"
+			UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}">
+			<File
+				RelativePath="..\..\..\src\getopt_win.h">
+			</File>
+			<File
+				RelativePath="..\..\..\src\wav_io.h">
+			</File>
+			<File
+				RelativePath="..\..\..\src\wave_out.h">
+			</File>
+		</Filter>
+		<Filter
+			Name="Resource Files"
+			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx"
+			UniqueIdentifier="{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}">
+		</Filter>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>

Added: freeswitch/trunk/libs/speex/win32/VS2003/speexenc/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2003/speexenc/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,8 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+EXTRA_DIST = speexenc.vcproj
+
+

Added: freeswitch/trunk/libs/speex/win32/VS2003/speexenc/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2003/speexenc/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,322 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = win32/VS2003/speexenc
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = speexenc.vcproj
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  win32/VS2003/speexenc/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  win32/VS2003/speexenc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/win32/VS2003/speexenc/speexenc.vcproj
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2003/speexenc/speexenc.vcproj	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,292 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="7.10"
+	Name="speexenc"
+	ProjectGUID="{961B8359-1393-4EF7-B8E0-67B6FE1C6DA8}"
+	Keyword="Win32Proj">
+	<Platforms>
+		<Platform
+			Name="Win32"/>
+	</Platforms>
+	<Configurations>
+		<Configuration
+			Name="Debug|Win32"
+			OutputDirectory="Debug"
+			IntermediateDirectory="Debug"
+			ConfigurationType="1"
+			CharacterSet="2">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..\include;..\..\..\..\libogg\include;..\..\..\libspeex;..\.."
+				PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;HAVE_CONFIG_H"
+				MinimalRebuild="TRUE"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="1"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="4"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="winmm.lib"
+				OutputFile="$(OutDir)/speexenc.exe"
+				LinkIncremental="2"
+				GenerateDebugInformation="TRUE"
+				ProgramDatabaseFile="$(OutDir)/speexenc.pdb"
+				SubSystem="1"
+				TargetMachine="1"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCWebDeploymentTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win32"
+			OutputDirectory="Release"
+			IntermediateDirectory="Release"
+			ConfigurationType="1"
+			CharacterSet="2"
+			WholeProgramOptimization="TRUE">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				GlobalOptimizations="TRUE"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="TRUE"
+				FavorSizeOrSpeed="1"
+				OptimizeForProcessor="2"
+				AdditionalIncludeDirectories="..\..\..\include;..\..\..\..\libogg\include;..\..\..\libspeex;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;HAVE_CONFIG_H: USE_ALLOCA"
+				StringPooling="TRUE"
+				ExceptionHandling="FALSE"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="FALSE"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="3"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="winmm.lib"
+				OutputFile="$(OutDir)/speexenc.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="TRUE"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCWebDeploymentTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="Release_SSE|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="1"
+			CharacterSet="2"
+			WholeProgramOptimization="TRUE">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				GlobalOptimizations="TRUE"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="TRUE"
+				FavorSizeOrSpeed="1"
+				OptimizeForProcessor="2"
+				AdditionalIncludeDirectories="..\..\..\include;..\..\..\..\libogg\include;..\..\..\libspeex;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;HAVE_CONFIG_H"
+				StringPooling="TRUE"
+				ExceptionHandling="FALSE"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="FALSE"
+				EnableEnhancedInstructionSet="1"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="3"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="winmm.lib"
+				OutputFile="$(OutDir)/speexenc.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="TRUE"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCWebDeploymentTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="Release_SSE2|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="1"
+			CharacterSet="2"
+			WholeProgramOptimization="TRUE">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				GlobalOptimizations="TRUE"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="TRUE"
+				FavorSizeOrSpeed="1"
+				OptimizeForProcessor="3"
+				AdditionalIncludeDirectories="..\..\..\include;..\..\..\..\libogg\include;..\..\..\libspeex;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;HAVE_CONFIG_H"
+				StringPooling="TRUE"
+				ExceptionHandling="FALSE"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="FALSE"
+				EnableEnhancedInstructionSet="2"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="3"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="winmm.lib"
+				OutputFile="$(OutDir)/speexenc.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="TRUE"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCWebDeploymentTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Source Files"
+			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm;asmx"
+			UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}">
+			<File
+				RelativePath="..\..\..\src\getopt.c">
+			</File>
+			<File
+				RelativePath="..\..\..\src\getopt1.c">
+			</File>
+			<File
+				RelativePath="..\..\..\src\speexenc.c">
+			</File>
+			<File
+				RelativePath="..\..\..\src\wav_io.c">
+			</File>
+			<File
+				RelativePath="..\..\..\src\wave_out.c">
+			</File>
+		</Filter>
+		<Filter
+			Name="Header Files"
+			Filter="h;hpp;hxx;hm;inl;inc;xsd"
+			UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}">
+			<File
+				RelativePath="..\..\..\src\getopt_win.h">
+			</File>
+			<File
+				RelativePath="..\..\..\src\wav_io.h">
+			</File>
+			<File
+				RelativePath="..\..\..\src\wave_out.h">
+			</File>
+		</Filter>
+		<Filter
+			Name="Resource Files"
+			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx"
+			UniqueIdentifier="{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}">
+		</Filter>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>

Added: freeswitch/trunk/libs/speex/win32/VS2005/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2005/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,8 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+SUBDIRS = libspeex speexenc speexdec
+
+EXTRA_DIST = 

Added: freeswitch/trunk/libs/speex/win32/VS2005/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2005/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,466 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = win32/VS2005
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-exec-recursive install-info-recursive \
+	install-recursive installcheck-recursive installdirs-recursive \
+	pdf-recursive ps-recursive uninstall-info-recursive \
+	uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS = libspeex speexenc speexdec
+EXTRA_DIST = 
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  win32/VS2005/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  win32/VS2005/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || mkdir "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="../$(top_distdir)" \
+	        distdir="../$(distdir)/$$subdir" \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
+	clean clean-generic clean-libtool clean-recursive ctags \
+	ctags-recursive distclean distclean-generic distclean-libtool \
+	distclean-recursive distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-exec install-exec-am install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic maintainer-clean-recursive \
+	mostlyclean mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/win32/VS2005/libspeex/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2005/libspeex/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,8 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+EXTRA_DIST = libspeex.vcproj
+
+

Added: freeswitch/trunk/libs/speex/win32/VS2005/libspeex/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2005/libspeex/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,322 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = win32/VS2005/libspeex
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = libspeex.vcproj
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  win32/VS2005/libspeex/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  win32/VS2005/libspeex/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/win32/VS2005/libspeex/libspeex.vcproj
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2005/libspeex/libspeex.vcproj	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,1688 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="8.00"
+	Name="libspeex"
+	ProjectGUID="{E972C52F-9E85-4D65-B19C-031E511E9DB4}"
+	RootNamespace="libspeex"
+	Keyword="Win32Proj"
+	>
+	<Platforms>
+		<Platform
+			Name="Win32"
+		/>
+		<Platform
+			Name="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)"
+		/>
+	</Platforms>
+	<ToolFiles>
+	</ToolFiles>
+	<Configurations>
+		<Configuration
+			Name="Debug|Win32"
+			OutputDirectory="$(SolutionDir)$(ConfigurationName)"
+			IntermediateDirectory="Debug"
+			ConfigurationType="4"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;_DEBUG;_LIB;HAVE_CONFIG_H"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="1"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="4"
+				CompileAs="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win32"
+			OutputDirectory="$(SolutionDir)$(ConfigurationName)"
+			IntermediateDirectory="Release"
+			ConfigurationType="4"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_LIB;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+				CompileAs="1"
+				DisableSpecificWarnings="4244;4305;4311;4100;4127"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release_SSE|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="4"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_LIB;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				EnableEnhancedInstructionSet="1"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+				CompileAs="1"
+				DisableSpecificWarnings="4244;4305;4311;4100;4127"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release_SSE2|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="4"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_LIB;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				EnableEnhancedInstructionSet="2"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+				CompileAs="1"
+				DisableSpecificWarnings="4244;4305;4311;4100;4127"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release_Dynamic|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="2"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_LIB;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+				CompileAs="1"
+				DisableSpecificWarnings="4244;4305;4311;4100;4127"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				ModuleDefinitionFile="libspeex.def"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug_RTL_dll|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="4"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;_DEBUG;_LIB;HAVE_CONFIG_H"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="3"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="4"
+				CompileAs="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release_RTL_dll|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="4"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_LIB;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+				CompileAs="1"
+				DisableSpecificWarnings="4244;4305;4311;4100;4127"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug_WM5_PPC_ARM|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="4"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;_DEBUG;_LIB;HAVE_CONFIG_H"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="3"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="4"
+				CompileAs="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release_WM5_PPC_ARM|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="4"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_LIB;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+				CompileAs="1"
+				DisableSpecificWarnings="4244;4305;4311;4100;4127"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|Windows Mobile 5.0 Pocket PC SDK (ARMV4I)"
+			OutputDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			IntermediateDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			ConfigurationType="4"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="1"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				ExecutionBucket="7"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;_DEBUG;_LIB;HAVE_CONFIG_H"
+				MinimalRebuild="true"
+				RuntimeLibrary="1"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				CompileAs="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCCodeSignTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+			<DeploymentTool
+				ForceDirty="-1"
+				RemoteDirectory=""
+				RegisterOutput="0"
+				AdditionalFiles=""
+			/>
+			<DebuggerTool
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Windows Mobile 5.0 Pocket PC SDK (ARMV4I)"
+			OutputDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			IntermediateDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			ConfigurationType="4"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="1"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="1"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				ExecutionBucket="7"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_LIB;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				DebugInformationFormat="3"
+				CompileAs="1"
+				DisableSpecificWarnings="4244;4305;4311;4100;4127"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCCodeSignTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+			<DeploymentTool
+				ForceDirty="-1"
+				RemoteDirectory=""
+				RegisterOutput="0"
+				AdditionalFiles=""
+			/>
+			<DebuggerTool
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release_SSE|Windows Mobile 5.0 Pocket PC SDK (ARMV4I)"
+			OutputDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			IntermediateDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			ConfigurationType="4"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="1"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="1"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				ExecutionBucket="7"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_LIB;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				DebugInformationFormat="3"
+				CompileAs="1"
+				DisableSpecificWarnings="4244;4305;4311;4100;4127"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCCodeSignTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+			<DeploymentTool
+				ForceDirty="-1"
+				RemoteDirectory=""
+				RegisterOutput="0"
+				AdditionalFiles=""
+			/>
+			<DebuggerTool
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release_SSE2|Windows Mobile 5.0 Pocket PC SDK (ARMV4I)"
+			OutputDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			IntermediateDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			ConfigurationType="4"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="1"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="1"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				ExecutionBucket="7"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_LIB;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				DebugInformationFormat="3"
+				CompileAs="1"
+				DisableSpecificWarnings="4244;4305;4311;4100;4127"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCCodeSignTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+			<DeploymentTool
+				ForceDirty="-1"
+				RemoteDirectory=""
+				RegisterOutput="0"
+				AdditionalFiles=""
+			/>
+			<DebuggerTool
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release_Dynamic|Windows Mobile 5.0 Pocket PC SDK (ARMV4I)"
+			OutputDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			IntermediateDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			ConfigurationType="2"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="1"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="1"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				ExecutionBucket="7"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_LIB;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				DebugInformationFormat="3"
+				CompileAs="1"
+				DisableSpecificWarnings="4244;4305;4311;4100;4127"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				ModuleDefinitionFile="libspeex.def"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="0"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCCodeSignTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+			<DeploymentTool
+				ForceDirty="-1"
+				RemoteDirectory=""
+				RegisterOutput="0"
+				AdditionalFiles=""
+			/>
+			<DebuggerTool
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug_RTL_dll|Windows Mobile 5.0 Pocket PC SDK (ARMV4I)"
+			OutputDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			IntermediateDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			ConfigurationType="4"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="1"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				ExecutionBucket="7"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;_DEBUG;_LIB;HAVE_CONFIG_H"
+				MinimalRebuild="true"
+				RuntimeLibrary="3"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				CompileAs="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCCodeSignTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+			<DeploymentTool
+				ForceDirty="-1"
+				RemoteDirectory=""
+				RegisterOutput="0"
+				AdditionalFiles=""
+			/>
+			<DebuggerTool
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release_RTL_dll|Windows Mobile 5.0 Pocket PC SDK (ARMV4I)"
+			OutputDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			IntermediateDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			ConfigurationType="4"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="1"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="1"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				ExecutionBucket="7"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_LIB;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				DebugInformationFormat="3"
+				CompileAs="1"
+				DisableSpecificWarnings="4244;4305;4311;4100;4127"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCCodeSignTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+			<DeploymentTool
+				ForceDirty="-1"
+				RemoteDirectory=""
+				RegisterOutput="0"
+				AdditionalFiles=""
+			/>
+			<DebuggerTool
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug_WM5_PPC_ARM|Windows Mobile 5.0 Pocket PC SDK (ARMV4I)"
+			OutputDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			IntermediateDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			ConfigurationType="4"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="1"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				ExecutionBucket="7"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;_DEBUG;_LIB;HAVE_CONFIG_H;FIXED_POINT;_WIN32_WCE=$(CEVER);UNDER_CE;$(PLATFORMDEFINES);WINCE;$(ARCHFAM);$(_ARCHFAM_)"
+				MinimalRebuild="true"
+				RuntimeLibrary="3"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				DebugInformationFormat="0"
+				CompileAs="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCCodeSignTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+			<DeploymentTool
+				ForceDirty="-1"
+				RemoteDirectory=""
+				RegisterOutput="0"
+				AdditionalFiles=""
+			/>
+			<DebuggerTool
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release_WM5_PPC_ARM|Windows Mobile 5.0 Pocket PC SDK (ARMV4I)"
+			OutputDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			IntermediateDirectory="Windows Mobile 5.0 Pocket PC SDK (ARMV4I)\$(ConfigurationName)"
+			ConfigurationType="4"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="1"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="1"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				ExecutionBucket="7"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_LIB;HAVE_CONFIG_H;FIXED_POINT;_WIN32_WCE=$(CEVER);UNDER_CE;$(PLATFORMDEFINES);WINCE;$(ARCHFAM);$(_ARCHFAM_)"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				WarningLevel="4"
+				DebugInformationFormat="0"
+				CompileAs="1"
+				DisableSpecificWarnings="4244;4305;4311;4100;4127"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)/libspeex.lib"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCCodeSignTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+			<DeploymentTool
+				ForceDirty="-1"
+				RemoteDirectory=""
+				RegisterOutput="0"
+				AdditionalFiles=""
+			/>
+			<DebuggerTool
+			/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Source Files"
+			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm;asmx"
+			UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
+			>
+			<File
+				RelativePath="..\..\..\libspeex\bits.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\cb_search.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\exc_10_16_table.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\exc_10_32_table.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\exc_20_32_table.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\exc_5_256_table.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\exc_5_64_table.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\exc_8_128_table.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\fftwrap.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\filters.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\gain_table.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\gain_table_lbr.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\hexc_10_32_table.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\hexc_table.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\high_lsp_tables.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\jitter.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\kiss_fft.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\kiss_fftr.c"
+				>
+			</File>
+			<File
+				RelativePath=".\libspeex.def"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\lpc.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\lsp.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\lsp_tables_nb.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\ltp.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\math_approx.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\mdf.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\medfilter.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\misc.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\modes.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\nb_celp.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\preprocess.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\quant_lsp.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\sb_celp.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\smallft.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\speex.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\speex_callbacks.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\speex_header.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\stereo.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\vbr.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\vq.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\window.c"
+				>
+			</File>
+		</Filter>
+		<Filter
+			Name="Header Files"
+			Filter="h;hpp;hxx;hm;inl;inc;xsd"
+			UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}"
+			>
+			<File
+				RelativePath="..\..\..\libspeex\cb_search.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\config.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\fftwrap.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\filters.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\filters_sse.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\kiss_fft.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\kiss_fftr.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\lpc.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\lsp.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\ltp.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\ltp_sse.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\math_approx.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\misc.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\modes.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\nb_celp.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\pseudofloat.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\quant_lsp.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\sb_celp.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_bits.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_callbacks.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_echo.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_header.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_jitter.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_noglobals.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_preprocess.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_stereo.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\include\speex\speex_types.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\stack_alloc.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\vbr.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\libspeex\vq.h"
+				>
+			</File>
+		</Filter>
+		<Filter
+			Name="Resource Files"
+			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx"
+			UniqueIdentifier="{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}"
+			>
+		</Filter>
+		<File
+			RelativePath=".\ReadMe.txt"
+			>
+		</File>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>

Added: freeswitch/trunk/libs/speex/win32/VS2005/speexdec/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2005/speexdec/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,8 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+EXTRA_DIST = speexdec.vcproj
+
+

Added: freeswitch/trunk/libs/speex/win32/VS2005/speexdec/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2005/speexdec/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,322 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = win32/VS2005/speexdec
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = speexdec.vcproj
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  win32/VS2005/speexdec/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  win32/VS2005/speexdec/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/win32/VS2005/speexdec/speexdec.vcproj
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2005/speexdec/speexdec.vcproj	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,430 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="8.00"
+	Name="speexdec"
+	ProjectGUID="{961B8359-1393-4EF7-B8E0-67B6FE1C6DA8}"
+	RootNamespace="speexdec"
+	Keyword="Win32Proj"
+	>
+	<Platforms>
+		<Platform
+			Name="Win32"
+		/>
+	</Platforms>
+	<ToolFiles>
+	</ToolFiles>
+	<Configurations>
+		<Configuration
+			Name="Debug|Win32"
+			OutputDirectory="$(SolutionDir)$(ConfigurationName)"
+			IntermediateDirectory="Debug"
+			ConfigurationType="1"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..\include;..\..\..\..\libogg\include;..\..\..\libspeex;..\.."
+				PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;HAVE_CONFIG_H"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="1"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="4"
+				CompileAs="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="winmm.lib"
+				OutputFile="$(OutDir)/speexdec.exe"
+				LinkIncremental="2"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/speexenc.pdb"
+				SubSystem="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win32"
+			OutputDirectory="$(SolutionDir)$(ConfigurationName)"
+			IntermediateDirectory="Release"
+			ConfigurationType="1"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\..\..\..\libogg\include;..\..\..\libspeex;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+				CompileAs="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="winmm.lib"
+				OutputFile="$(OutDir)/speexdec.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release_SSE|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="1"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\..\..\..\libogg\include;..\..\..\libspeex;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				EnableEnhancedInstructionSet="1"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+				CompileAs="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="winmm.lib"
+				OutputFile="$(OutDir)/speexdec.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release_SSE2|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="1"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\..\..\..\libogg\include;..\..\..\libspeex;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				EnableEnhancedInstructionSet="2"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+				CompileAs="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="winmm.lib"
+				OutputFile="$(OutDir)/speexdec.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Source Files"
+			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm;asmx"
+			UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
+			>
+			<File
+				RelativePath="..\..\..\src\getopt.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\src\getopt1.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\src\skeleton.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\src\speexdec.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\src\wav_io.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\src\wave_out.c"
+				>
+			</File>
+		</Filter>
+		<Filter
+			Name="Header Files"
+			Filter="h;hpp;hxx;hm;inl;inc;xsd"
+			UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}"
+			>
+			<File
+				RelativePath="..\..\..\src\getopt_win.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\src\skeleton.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\src\wav_io.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\src\wave_out.h"
+				>
+			</File>
+		</Filter>
+		<Filter
+			Name="Resource Files"
+			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx"
+			UniqueIdentifier="{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}"
+			>
+		</Filter>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>

Added: freeswitch/trunk/libs/speex/win32/VS2005/speexenc/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2005/speexenc/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,8 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+EXTRA_DIST = speexenc.vcproj
+
+

Added: freeswitch/trunk/libs/speex/win32/VS2005/speexenc/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2005/speexenc/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,322 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = win32/VS2005/speexenc
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = speexenc.vcproj
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  win32/VS2005/speexenc/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  win32/VS2005/speexenc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/win32/VS2005/speexenc/speexenc.vcproj
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/VS2005/speexenc/speexenc.vcproj	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,430 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="8.00"
+	Name="speexenc"
+	ProjectGUID="{CD6043D1-D5E7-46D0-854F-00BB1BC308FC}"
+	RootNamespace="speexenc"
+	Keyword="Win32Proj"
+	>
+	<Platforms>
+		<Platform
+			Name="Win32"
+		/>
+	</Platforms>
+	<ToolFiles>
+	</ToolFiles>
+	<Configurations>
+		<Configuration
+			Name="Debug|Win32"
+			OutputDirectory="$(SolutionDir)$(ConfigurationName)"
+			IntermediateDirectory="Debug"
+			ConfigurationType="1"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..\include;..\..\..\..\libogg\include;..\..\..\libspeex;..\.."
+				PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;HAVE_CONFIG_H"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="1"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="4"
+				CompileAs="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="winmm.lib"
+				OutputFile="$(OutDir)/speexenc.exe"
+				LinkIncremental="2"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/speexenc.pdb"
+				SubSystem="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win32"
+			OutputDirectory="$(SolutionDir)$(ConfigurationName)"
+			IntermediateDirectory="Release"
+			ConfigurationType="1"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\..\..\..\libogg\include;..\..\..\libspeex;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+				CompileAs="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="winmm.lib"
+				OutputFile="$(OutDir)/speexenc.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release_SSE|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="1"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\..\..\..\libogg\include;..\..\..\libspeex;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				EnableEnhancedInstructionSet="1"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+				CompileAs="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="winmm.lib"
+				OutputFile="$(OutDir)/speexenc.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release_SSE2|Win32"
+			OutputDirectory="$(ConfigurationName)"
+			IntermediateDirectory="$(ConfigurationName)"
+			ConfigurationType="1"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="3"
+				InlineFunctionExpansion="2"
+				EnableIntrinsicFunctions="true"
+				FavorSizeOrSpeed="1"
+				AdditionalIncludeDirectories="..\..\..\include;..\..\..\..\libogg\include;..\..\..\libspeex;..\.."
+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;HAVE_CONFIG_H"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				EnableEnhancedInstructionSet="2"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+				CompileAs="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="winmm.lib"
+				OutputFile="$(OutDir)/speexenc.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Source Files"
+			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm;asmx"
+			UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
+			>
+			<File
+				RelativePath="..\..\..\src\getopt.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\src\getopt1.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\src\skeleton.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\src\speexenc.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\src\wav_io.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\src\wave_out.c"
+				>
+			</File>
+		</Filter>
+		<Filter
+			Name="Header Files"
+			Filter="h;hpp;hxx;hm;inl;inc;xsd"
+			UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}"
+			>
+			<File
+				RelativePath="..\..\..\src\getopt_win.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\src\skeleton.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\src\wav_io.h"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\src\wave_out.h"
+				>
+			</File>
+		</Filter>
+		<Filter
+			Name="Resource Files"
+			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx"
+			UniqueIdentifier="{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}"
+			>
+		</Filter>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>

Added: freeswitch/trunk/libs/speex/win32/config.h
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/config.h	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,3 @@
+#define inline __inline
+#define restrict
+#include "misc.h"
\ No newline at end of file

Added: freeswitch/trunk/libs/speex/win32/libspeex/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/libspeex/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,6 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+EXTRA_DIST = libspeex.dsp  libspeex.dsw libspeex_dynamic.dsp speex.def

Added: freeswitch/trunk/libs/speex/win32/libspeex/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/libspeex/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,322 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = win32/libspeex
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = libspeex.dsp  libspeex.dsw libspeex_dynamic.dsp speex.def
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  win32/libspeex/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  win32/libspeex/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/win32/libspeex/libspeex.dsp
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/libspeex/libspeex.dsp	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,302 @@
+# Microsoft Developer Studio Project File - Name="libspeex" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Static Library" 0x0104
+
+CFG=libspeex - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "libspeex.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "libspeex.mak" CFG="libspeex - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "libspeex - Win32 Release" (based on "Win32 (x86) Static Library")
+!MESSAGE "libspeex - Win32 Debug" (based on "Win32 (x86) Static Library")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName "Perforce Project"
+# PROP Scc_LocalPath "..\.."
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "libspeex - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Target_Dir ""
+F90=df.exe
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /FD /c
+# ADD CPP /nologo /GX /Ox /Ot /Og /Oi /Ob2 /I "../../include" /I "../" /D inline=__inline /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "HAVE_CONFIG_H" /YX /FD /c
+# ADD BASE RSC /l 0x809 /d "NDEBUG"
+# ADD RSC /l 0x809 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo
+
+!ELSEIF  "$(CFG)" == "libspeex - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Target_Dir ""
+F90=df.exe
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /FD /GZ /c
+# ADD CPP /nologo /W3 /GX /Ox /Ot /Og /Oi /Ob2 /I "../../include" /I "../" /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "HAVE_CONFIG_H" /YX /FD /c
+# ADD BASE RSC /l 0x809 /d "_DEBUG"
+# ADD RSC /l 0x809 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo
+
+!ENDIF 
+
+# Begin Target
+
+# Name "libspeex - Win32 Release"
+# Name "libspeex - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=..\..\libspeex\bits.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\cb_search.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\exc_10_16_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\exc_10_32_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\exc_20_32_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\exc_5_256_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\exc_5_64_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\exc_8_128_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\filters.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\gain_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\gain_table_lbr.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\hexc_10_32_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\hexc_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\high_lsp_tables.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\lpc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\lsp.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\lsp_tables_nb.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\ltp.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\math_approx.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\misc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\modes.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\nb_celp.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\preprocess.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\quant_lsp.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\sb_celp.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\smallft.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex_callbacks.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex_header.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\stereo.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\vbr.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\vq.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=..\..\libspeex\cb_search.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\filters.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\lpc.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\lsp.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\ltp.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\misc.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\modes.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\nb_celp.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\quant_lsp.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\sb_celp.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\smallft.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex_bits.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex_callbacks.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex_denoise.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex_header.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex_stereo.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\stack_alloc.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\vbr.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\vq.h
+# End Source File
+# End Group
+# End Target
+# End Project

Added: freeswitch/trunk/libs/speex/win32/libspeex/libspeex.dsw
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/libspeex/libspeex.dsw	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,41 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "libspeex"=.\libspeex.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "libspeex_dynamic"=.\libspeex_dynamic.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

Added: freeswitch/trunk/libs/speex/win32/libspeex/libspeex_dynamic.dsp
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/libspeex/libspeex_dynamic.dsp	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,311 @@
+# Microsoft Developer Studio Project File - Name="libspeex_dynamic" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
+
+CFG=libspeex_dynamic - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "libspeex_dynamic.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "libspeex_dynamic.mak" CFG="libspeex_dynamic - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "libspeex_dynamic - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "libspeex_dynamic - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+MTL=midl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "libspeex_dynamic - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "libspeex_dynamic___Win32_Release"
+# PROP BASE Intermediate_Dir "libspeex_dynamic___Win32_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Dynamic_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "LIBSPEEX_DYNAMIC_EXPORTS" /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /I "../../include" /I "../" /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "LIBSPEEX_DYNAMIC_EXPORTS" /D "HAVE_CONFIG_H" /YX /FD /c
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386 /out:"Release/libspeex.dll"
+
+!ELSEIF  "$(CFG)" == "libspeex_dynamic - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "libspeex_dynamic___Win32_Debug"
+# PROP BASE Intermediate_Dir "libspeex_dynamic___Win32_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Dynamic_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "LIBSPEEX_DYNAMIC_EXPORTS" /YX /FD /GZ /c
+# ADD CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /I "../../include" /I "../" /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "LIBSPEEX_DYNAMIC_EXPORTS" /D "HAVE_CONFIG_H" /YX /FD /GZ /c
+# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /out:"Debug/libspeex.dll" /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "libspeex_dynamic - Win32 Release"
+# Name "libspeex_dynamic - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter ""
+# Begin Source File
+
+SOURCE=..\..\libspeex\bits.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\cb_search.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\exc_10_16_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\exc_10_32_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\exc_20_32_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\exc_5_256_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\exc_5_64_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\exc_8_128_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\filters.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\gain_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\gain_table_lbr.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\hexc_10_32_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\hexc_table.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\high_lsp_tables.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\lpc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\lsp.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\lsp_tables_nb.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\ltp.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\math_approx.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\misc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\modes.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\nb_celp.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\preprocess.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\quant_lsp.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\sb_celp.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\smallft.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\speex.def
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex_callbacks.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex_header.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\stereo.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\vbr.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\vq.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=..\..\libspeex\cb_search.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\filters.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\lpc.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\lsp.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\ltp.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\misc.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\modes.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\nb_celp.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\quant_lsp.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\sb_celp.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\smallft.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex_bits.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex_callbacks.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex_denoise.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex_header.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\speex_stereo.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\stack_alloc.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\vbr.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\libspeex\vq.h
+# End Source File
+# End Group
+# End Target
+# End Project

Added: freeswitch/trunk/libs/speex/win32/libspeex/speex.def
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/libspeex/speex.def	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,72 @@
+;
+; speex.def
+;
+LIBRARY
+NAME libspeex.dll
+EXPORTS
+;
+speex_bits_advance @1
+speex_bits_destroy @2
+speex_bits_init @3
+speex_bits_init_buffer @4
+speex_bits_insert_terminator @5
+speex_bits_nbytes @6
+speex_bits_pack @7
+speex_bits_peek @8
+speex_bits_peek_unsigned @9
+speex_bits_read_from @10
+speex_bits_read_whole_bytes @11
+speex_bits_remaining @12
+speex_bits_reset @13
+speex_bits_rewind @14
+speex_bits_unpack_signed @15
+speex_bits_unpack_unsigned @16
+speex_bits_write @17
+speex_bits_write_whole_bytes @18
+speex_decode @19
+speex_decode_stereo @20
+speex_decoder_ctl @21
+speex_decoder_destroy @22
+speex_decoder_init @23
+speex_default_user_handler @24
+speex_encode @25
+speex_encode_stereo @26
+speex_encoder_ctl @27
+speex_encoder_destroy @28
+speex_encoder_init @29
+speex_header_to_packet @30
+speex_inband_handler @31
+speex_init_header @32
+speex_lib_ctl @33
+speex_mode_query @34
+speex_packet_to_header @35
+speex_std_char_handler @36
+speex_std_enh_request_handler @37
+speex_std_high_mode_request_handler @38
+speex_std_low_mode_request_handler @39
+speex_std_mode_request_handler @40
+speex_std_stereo_request_handler @41
+speex_std_vbr_quality_request_handler @42
+speex_std_vbr_request_handler @43
+speex_decode_int @44
+speex_decode_stereo_int @45
+speex_echo_cancel @46
+speex_echo_state_destroy @47
+speex_echo_state_init @48
+speex_echo_state_reset @49
+speex_encode_int @50
+speex_encode_stereo_int @51
+speex_jitter_destroy @52
+speex_jitter_get @53
+speex_jitter_get_pointer_timestamp @54
+speex_jitter_init @55
+speex_jitter_put @56
+speex_lib_get_mode @57
+speex_preprocess @58
+speex_preprocess_ctl @59
+speex_preprocess_estimate_update @60
+speex_preprocess_state_destroy @61
+speex_preprocess_state_init @62
+speex_nb_mode @63 DATA
+speex_wb_mode @64 DATA
+speex_uwb_mode @65 DATA

Added: freeswitch/trunk/libs/speex/win32/speex.iss
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/speex.iss	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,47 @@
+; Script generated by the Inno Setup Script Wizard.
+; SEE THE DOCUMENTATION FOR DETAILS ON CREATING INNO SETUP SCRIPT FILES!
+
+[Setup]
+AppName=Speex
+AppVerName=Speex V1.1.6
+AppPublisherURL=http://www.speex.org
+AppSupportURL=http://www.speex.org
+AppUpdatesURL=http://www.speex.org
+DefaultDirName={pf}\Speex
+DefaultGroupName=Speex
+AllowNoIcons=yes
+LicenseFile=..\COPYING
+InfoAfterFile=..\README
+OutputDir=.
+OutputBaseFilename=speex_win32_1.1.6_setup
+; uncomment the following line if you want your installation to run on NT 3.51 too.
+; MinVersion=4,3.51
+
+[Tasks]
+;Name: "desktopicon"; Description: "Create a &desktop icon"; GroupDescription: "Additional icons:"; MinVersion: 4,4
+
+[Dirs]
+Name: "{app}"
+Name: "{app}\doc"
+Name: "{app}\html"
+Name: "{app}\libspeex"
+Name: "{app}\libspeex\include"
+
+[Files]
+Source: "speexdec\Release\speexdec.exe"; DestDir: "{app}"; Flags: ignoreversion
+Source: "speexenc\Release\speexenc.exe"; DestDir: "{app}"; Flags: ignoreversion
+Source: "libspeex\Release\libspeex.lib"; DestDir: "{app}\libspeex"; Flags: ignoreversion
+Source: "libspeex\Release\libspeex.exp"; DestDir: "{app}\libspeex"; Flags: ignoreversion
+Source: "libspeex\Release\libspeex.dll"; DestDir: "{app}\libspeex"; Flags: ignoreversion
+Source: "..\include\speex\speex.h"; DestDir: "{app}\libspeex\include"; Flags: ignoreversion
+Source: "..\include\speex\speex_bits.h"; DestDir: "{app}\libspeex\include"; Flags: ignoreversion
+Source: "..\include\speex\speex_callbacks.h"; DestDir: "{app}\libspeex\include"; Flags: ignoreversion
+Source: "..\include\speex\speex_echo.h"; DestDir: "{app}\libspeex\include"; Flags: ignoreversion
+Source: "..\include\speex\speex_header.h"; DestDir: "{app}\libspeex\include"; Flags: ignoreversion
+Source: "..\include\speex\speex_jitter.h"; DestDir: "{app}\libspeex\include"; Flags: ignoreversion
+Source: "..\include\speex\speex_preprocess.h"; DestDir: "{app}\libspeex\include"; Flags: ignoreversion
+Source: "..\include\speex\speex_stereo.h"; DestDir: "{app}\libspeex\include"; Flags: ignoreversion
+Source: "..\doc\manual.pdf"; DestDir: "{app}\doc"; Flags: ignoreversion
+
+[Run]
+

Added: freeswitch/trunk/libs/speex/win32/speexdec/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/speexdec/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,6 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+EXTRA_DIST = speexdec.dsp  speexdec.dsw

Added: freeswitch/trunk/libs/speex/win32/speexdec/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/speexdec/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,322 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = win32/speexdec
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = speexdec.dsp  speexdec.dsw
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  win32/speexdec/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  win32/speexdec/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/win32/speexdec/speexdec.dsp
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/speexdec/speexdec.dsp	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,130 @@
+# Microsoft Developer Studio Project File - Name="speexdec" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=speexdec - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "speexdec.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "speexdec.mak" CFG="speexdec - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "speexdec - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "speexdec - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "speexdec - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD CPP /nologo /GX /O2 /I "../../libspeex" /I "../../../ogg/include" /I "../../include" /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD BASE RSC /l 0x809 /d "NDEBUG"
+# ADD RSC /l 0x809 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib winmm.lib /nologo /subsystem:console /machine:I386 /nodefaultlib:"LIBCMT.lib"
+
+!ELSEIF  "$(CFG)" == "speexdec - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
+# ADD CPP /nologo /W3 /Gm /GX /ZI /Od /I "../../libspeex" /I "../../../ogg/include" /I "../../include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
+# ADD BASE RSC /l 0x809 /d "_DEBUG"
+# ADD RSC /l 0x809 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib winmm.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "speexdec - Win32 Release"
+# Name "speexdec - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=..\..\src\getopt.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\getopt1.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\speexdec.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\wav_io.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\wave_out.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=..\..\src\getopt_win.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\wav_io.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\wave_out.h
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

Added: freeswitch/trunk/libs/speex/win32/speexdec/speexdec.dsw
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/speexdec/speexdec.dsw	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,59 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "libspeex"=..\libspeex\libspeex.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "ogg_static"="..\..\..\MYOV-1.0\ogg\win32\ogg_static.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "speexdec"=.\speexdec.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+    Begin Project Dependency
+    Project_Dep_Name libspeex
+    End Project Dependency
+    Begin Project Dependency
+    Project_Dep_Name ogg_static
+    End Project Dependency
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

Added: freeswitch/trunk/libs/speex/win32/speexenc/Makefile.am
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/speexenc/Makefile.am	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,6 @@
+## Process this file with automake to produce Makefile.in. -*-Makefile-*-
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+
+EXTRA_DIST = speexenc.dsp  speexenc.dsw

Added: freeswitch/trunk/libs/speex/win32/speexenc/Makefile.in
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/speexenc/Makefile.in	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,322 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Disable automatic dependency tracking if using other tools than gcc and gmake
+#AUTOMAKE_OPTIONS = no-dependencies
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = win32/speexenc
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(mkdir_p)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE16 = @SIZE16@
+SIZE32 = @SIZE32@
+SPEEX_LT_AGE = @SPEEX_LT_AGE@
+SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@
+SPEEX_LT_REVISION = @SPEEX_LT_REVISION@
+SPEEX_VERSION = @SPEEX_VERSION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+src = @src@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = speexenc.dsp  speexenc.dsw
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  win32/speexenc/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  win32/speexenc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: freeswitch/trunk/libs/speex/win32/speexenc/speexenc.dsp
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/speexenc/speexenc.dsp	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,122 @@
+# Microsoft Developer Studio Project File - Name="speexenc" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=speexenc - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "speexenc.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "speexenc.mak" CFG="speexenc - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "speexenc - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "speexenc - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "speexenc - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD CPP /nologo /GX /Ox /Ot /Og /Oi /Ob2 /I "../../libspeex" /I "../../../ogg/include" /I "../../include" /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD BASE RSC /l 0x809 /d "NDEBUG"
+# ADD RSC /l 0x809 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 /nodefaultlib:"LIBCMT.lib"
+
+!ELSEIF  "$(CFG)" == "speexenc - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
+# ADD CPP /nologo /W3 /Gm /GX /ZI /Od /I "../../libspeex" /I "../../../ogg/include" /I "../../include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
+# ADD BASE RSC /l 0x809 /d "_DEBUG"
+# ADD RSC /l 0x809 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "speexenc - Win32 Release"
+# Name "speexenc - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=..\..\src\getopt.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\getopt1.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\speexenc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\wav_io.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=..\..\src\getopt_win.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\wav_io.h
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

Added: freeswitch/trunk/libs/speex/win32/speexenc/speexenc.dsw
==============================================================================
--- (empty file)
+++ freeswitch/trunk/libs/speex/win32/speexenc/speexenc.dsw	Wed Dec 20 13:13:27 2006
@@ -0,0 +1,59 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "libspeex"=..\libspeex\libspeex.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "ogg_static"="..\..\..\MYOV-1.0\ogg\win32\ogg_static.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "speexenc"=.\speexenc.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+    Begin Project Dependency
+    Project_Dep_Name libspeex
+    End Project Dependency
+    Begin Project Dependency
+    Project_Dep_Name ogg_static
+    End Project Dependency
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

Modified: freeswitch/trunk/src/mod/codecs/mod_speex/Makefile
==============================================================================
--- freeswitch/trunk/src/mod/codecs/mod_speex/Makefile	(original)
+++ freeswitch/trunk/src/mod/codecs/mod_speex/Makefile	Wed Dec 20 13:13:27 2006
@@ -1,7 +1,7 @@
 all:	depends $(MODNAME).$(DYNAMIC_LIB_EXTEN)
 
 depends:
-	MAKE=$(MAKE) $(BASE)/build/buildlib.sh $(BASE) install speex-1.1.12.tar.gz --prefix=$(PREFIX) --disable-shared --with-pic
+	MAKE=$(MAKE) $(BASE)/build/buildlib.sh $(BASE) install speex --prefix=$(PREFIX) --disable-shared --with-pic
 
 $(MODNAME).$(DYNAMIC_LIB_EXTEN): $(MODNAME).c
 	$(CC) $(CFLAGS) -fPIC -c $(MODNAME).c -o $(MODNAME).o



More information about the Freeswitch-svn mailing list