[Freeswitch-docs] [Freeswitch-users] piped failover doesn't work in dialplan, but works from console

Fri Feb 20 00:38:04 MSK 2015

freeswitch at internal> originate
{fail_on_single_reject=CALL_REJECTED:NO_ANSWER}error/NO_ANSWER|error/USER_BUSY|error/CALL_REJECTED
999

-ERR NO_ANSWER

2015-02-19 15:35:39.032653 [DEBUG] switch_ivr_originate.c:2100 Parsing
global variables

2015-02-19 15:35:39.032653 [DEBUG] switch_event.c:1688 Parsing variable
[fail_on_single_reject]=[CALL_REJECTED:NO_ANSWER]

2015-02-19 15:35:39.032653 [NOTICE] switch_ivr_originate.c:2732 Cannot
create outgoing channel of type [error] cause: [NO_ANSWER]

What code are you running?

On Thu, Feb 19, 2015 at 2:35 PM, Mi Ke <mi.ke at null.net> wrote:

> Hello Brian,
>
> Thank you for your response.
>
> The idea was taken here:
> https://wiki.freeswitch.org/wiki/Variable_fail_on_single_reject
>
> Commas in the list are not working either, even in console (where colons
> do):
>
>  freeswitch at internal> originate
> {fail_on_single_reject=CALL_REJECTED,NO_ANSWER}error/NO_ANSWER|error/USER_BUSY|error/CALL_REJECTED
> 999 <---- should be no_answer
> -ERR CALL_REJECTED
> 2015-02-19 20:29:34.377089 [DEBUG] switch_ivr_originate.c:2100 Parsing
> global variables
> 2015-02-19 20:29:34.377089 [DEBUG] switch_event.c:1688 Parsing variable
> [fail_on_single_reject]=[CALL_REJECTED]
> 2015-02-19 20:29:34.377089 [NOTICE] switch_ivr_originate.c:2732 Cannot
> create outgoing channel of type [error] cause: [NO_ANSWER]
> 2015-02-19 20:29:34.377089 [DEBUG] switch_ivr_originate.c:3720 Originate
> Resulted in Error Cause: 19 [NO_ANSWER]
> 2015-02-19 20:29:34.377089 [NOTICE] switch_ivr_originate.c:2732 Cannot
> create outgoing channel of type [error] cause: [USER_BUSY]
> 2015-02-19 20:29:34.377089 [DEBUG] switch_ivr_originate.c:3720 Originate
> Resulted in Error Cause: 17 [USER_BUSY]
> 2015-02-19 20:29:34.377089 [NOTICE] switch_ivr_originate.c:2732 Cannot
> create outgoing channel of type [error] cause: [CALL_REJECTED]
>
> *Sent:* Thursday, February 19, 2015 at 10:00 PM
> *From:* "Brian West" <brian at freeswitch.org>
> *To:* "FreeSWITCH Users Help" <freeswitch-users at lists.freeswitch.org>
> *Subject:* Re: [Freeswitch-users] piped failover doesn't work in
> dialplan, but works from console
>
> originate
> {fail_on_single_reject='CALL_REJECTED\,NO_ANSWER'}error/NO_ANSWER|error/USER_BUSY|error/CALL_REJECTED
> 999
>
>
>
> Where are you getting the idea you can use a colon to separate the causes?
>
>
>
>     /* When using the AND operator, the fail_on_single_reject flag may be
> set in order to indicate that a single
>
>
>        rejections should terminate the attempt rather than a timeout,
> answer, or rejection by all.
>
>
>        If the value is set to 'true' any fail cause will end the attempt
> otherwise it can contain a comma (,) separated
>
>
>        list of cause names which should be considered fatal
>
>
>
>
>
>      */
>
>
>
>
>
> On Thu, Feb 19, 2015 at 10:38 AM, Mi Ke <mi.ke at null.net> wrote:
>>
>>  Dear All,
>>
>> I'm experimenting with the piped failover on the latest master. I want a
>> failover to stop gw hunting and return from bridge when B-leg receives a
>> specific disconnect code e.g. USER_BUSY or NO_ANSWER, but while it works as
>> expected with error channels in console i.e.:
>>
>> freeswitch at internal> originate
>> {fail_on_single_reject=CALL_REJECTED:USER_BUSY}error/NO_ANSWER|error/USER_BUSY|error/CALL_REJECTED
>> 999
>> -ERR USER_BUSY
>>
>>  freeswitch at internal> originate
>> {fail_on_single_reject=CALL_REJECTED:NO_ANSWER}error/NO_ANSWER|error/USER_BUSY|error/CALL_REJECTED
>> 999
>> -ERR NO_ANSWER
>>
>> it does not work in dialplan:
>>
>>          <extension name="outbound">
>>             <condition field="destination_number" expression="^\d{7}$">
>>                 <action application="set"
>> data="bridge_answer_timeout=120"/>
>>                 <action application="set"
>> data="continue_on_fail=NORMAL_TEMPORARY_FAILURE:NO_ROUTE_DESTINATION:CALL_REJECTED"/>
>>                 <action application="set"
>> data="fail_on_single_reject=USER_BUSY:NO_ANSWER:NO_USER_RESPONSE:RECOVERY_ON_TIMER_EXPIRE:ORIGINATOR_CANCEL"/>
>>                 <action application="set" data="bridge_early_media=true"/>
>>                 <action application="set"
>> data="hangup_after_bridge=true"/>
>>                 <action application="odbc_query" inline="true"
>> data="route_out"/>
>>                 <action application="bridge" data="${bridge_to}"/>
>>                 <action application="hangup"
>> data="${last_bridge_hangup_cause}"/>
>>                 <anti-action application="hangup"
>> data="INVALID_NUMBER_FORMAT"/>
>>             </condition>
>>         </extension>
>>
>> or when included in bridge dialstring:
>>
>> <action application="bridge"
>> data="{fail_on_single_reject=USER_BUSY:NO_ANSWER}${bridge_to}"/>
>>
>> i.e. it tries *all* gateways in the dialstring and ignores returning
>> codes completely.
>>
>> I tried the same test when remote gateways were just hanging up with
>> USER_BUSY code on receiving calls, but it did not affect the same negative
>> result - all remote peers were tried in order and return code were ignored.
>>
>> I had the same experience with ver 1.2, but that time set
>> continue_on_single_reject=err1,err2,err3 in dialplan worked for me
>> flawlessly. However the same approach does not work for 1.5 and 1.4. Has
>> anyone succeded in getting it to work as expected?
>>
>> Thanks / Mike
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://confluence.freeswitch.org
>> http://www.cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>
>
>
> --
>
> *Brian West*
> brian at freeswitch.org
>
> *Twitter: @FreeSWITCH , @briankwest*
> http://www.freeswitchbook.com
> http://www.freeswitchcookbook.com
>
> *T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378)
> *iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services: consulting at freeswitch.org
> http://www.freeswitchsolutions.com Official FreeSWITCH Sites
> http://www.freeswitch.org http://confluence.freeswitch.org
> http://www.cluecon.com FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>

-- 

*Brian West*
brian at freeswitch.org

*Twitter: @FreeSWITCH , @briankwest*
http://www.freeswitchbook.com
http://www.freeswitchcookbook.com

*T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378)
*iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-docs/attachments/20150219/36d5a966/attachment-0001.html 