[Freeswitch-dev] FreeSwitch on PowerPC
Anthony Minessale
anthony.minessale at gmail.com
Mon Dec 1 21:48:53 MSK 2014
can you get a backtrace from gdb of the core file rather than strace?
I know the srtp lib has had a problem in big endian.
You could try adding --disable-srtp to configure params
On Mon, Dec 1, 2014 at 6:50 AM, Андрей Аппалонов <appalonovandrey at gmail.com>
wrote:
> Hello!
> Can you help me? The problem is as follows:
>
> I compiled FreeSwitch for PowerPC. FS compiled, but does not want to run.
> Gives a Aborted. Runs under strace, this is what gives (the last 38
> lines):
>
> open("/proc/stat", O_RDONLY) = 3
> fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
> 0x48023000
> read(3, "cpu 278 0 1857 11232 0 10 29 0 0"..., 1024) = 1024
> read(3, "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"..., 1024) = 161
> read(3, ""..., 1024) = 0
> close(3) = 0
> munmap(0x48023000, 4096) = 0
> sched_setscheduler(0, SCHED_FIFO, { 1 }) = 0
> setpriority(PRIO_PROCESS, 1485, -10) = 0
> setrlimit(RLIMIT_STACK, {rlim_cur=240*1024, rlim_max=8192*1024}) = 0
> setrlimit(RLIMIT_NOFILE, {rlim_cur=999999, rlim_max=999999}) = 0
> setrlimit(RLIMIT_CPU, {rlim_cur=RLIM_INFINITY, rlim_max=RLIM_INFINITY}) = 0
> setrlimit(RLIMIT_DATA, {rlim_cur=RLIM_INFINITY, rlim_max=RLIM_INFINITY}) =
> 0
> setrlimit(RLIMIT_FSIZE, {rlim_cur=RLIM_INFINITY, rlim_max=RLIM_INFINITY})
> = 0
> setrlimit(RLIMIT_NPROC, {rlim_cur=RLIM_INFINITY, rlim_max=RLIM_INFINITY})
> = 0
> setrlimit(RLIMIT_RTPRIO, {rlim_cur=RLIM_INFINITY, rlim_max=RLIM_INFINITY})
> = 0
> setrlimit(RLIMIT_AS, {rlim_cur=RLIM_INFINITY, rlim_max=RLIM_INFINITY}) = 0
> mkdir("/usr/local/freeswitch/
> run", 0750) = -1 EEXIST (File exists)
> open("/usr/local/freeswitch/run/freeswitch.pid", O_RDONLY) = 3
> read(3, "1483"..., 32) = 4
> close(3) = 0
> open("/usr/local/freeswitch/run/freeswitch.pid", O_WRONLY|O_CREAT|O_TRUNC,
> 0600) = 3
> fcntl64(3, F_SETLK, {type=F_WRLCK, whence=SEEK_SET, start=0, len=0}) = 0
> write(3, "1485"..., 4) = 4
> uname({sys="Linux", node="OD-171/172", ...}) = 0
> open("/proc/stat", O_RDONLY) = 4
> fstat64(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
> 0x48023000
> read(4, "cpu 279 0 1858 11232 0 10 29 0 0"..., 1024) = 1024
> read(4, "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"..., 1024) = 161
> read(4, ""..., 1024) = 0
> close(4) = 0
> munmap(0x48023000, 4096) = 0
> rt_sigprocmask(SIG_UNBLOCK, [ABRT], NULL, 8) = 0
> tgkill(1485, 1485, SIGABRT) = 0
> --- SIGABRT (Aborted) @ 0 (0) ---
> +++ killed by SIGABRT +++
>
> it wrote gdb:
>
> warning: exec file is newer than core file.
>
> warning: Can't read pathname for load map: Input/output error.
> Reading symbols from /lib/libm.so.6...done.
> Loaded symbols for /lib/libm.so.6
> Reading symbols from /lib/libpthread.so.0...done.
> Loaded symbols for /lib/libpthread.so.0
> Reading symbols from /usr/local/freeswitch/lib/libfreeswitch.so.1...done.
> Loaded symbols for /usr/local/freeswitch/lib/libfreeswitch.so.1
> Reading symbols from /usr/lib/libz.so.1...done.
> Loaded symbols for /usr/lib/libz.so.1
> Reading symbols from /lib/librt.so.1...done.
> Loaded symbols for /lib/librt.so.1
> Reading symbols from /lib/libdl.so.2...done.
> Loaded symbols for /lib/libdl.so.2
> Reading symbols from /lib/libcrypt.so.1...done.
> Loaded symbols for /lib/libcrypt.so.1
> Reading symbols from /usr/lib/libssl.so.0.9.8...done.
> Loaded symbols for /usr/lib/libssl.so.0.9.8
> Reading symbols from /usr/lib/libcrypto.so.0.9.8...done.
> Loaded symbols for /usr/lib/libcrypto.so.0.9.8
> Reading symbols from /usr/lib/libjpeg.so.62...done.
> Loaded symbols for /usr/lib/libjpeg.so.62
> Reading symbols from /lib/libc.so.6...done.
> Loaded symbols for /lib/libc.so.6
> Reading symbols from /lib/ld.so.1...done.
> Loaded symbols for /lib/ld.so.1
> Reading symbols from /lib/libstdc++.so.6...done.
> Loaded symbols for /lib/libstdc++.so.6
> Reading symbols from /lib/libgcc_s.so.1...done.
> Loaded symbols for /lib/libgcc_s.so.1
> Core was generated by `./freeswitch'.
> Program terminated with signal 6, Aborted.
> #0 0x0f84e564 in raise () from /lib/libc.so.6
>
> Under gdb run:
>
> export CFLAGS = "- g -ggdb"
> export MOD_CFLAGS = "- g -ggdb"
> ./run_configure
> make
>
> ulimit -c unlimited
> ./freeswitch
>
> gdb bin / freeswitch core
>
> Version FreeSwitch 1.4.0.
>
> run_configure looks like this:
>
> export PATH = / opt / freescale / usr / local / gcc-4.1.78-eglibc-2.5.78-1
> / powerpc-e300c3-linux-gnu / bin: \
> / home / common / ltib-mpc83xx / mpc8308erdb / rootfs / usr / lib: \
> / home / common / ltib-mpc83xx / mpc8308erdb / rootfs: \
> / home / common / ltib-mpc83xx / mpc8308erdb / rootfs / lib: $ PATH
>
> #export CC = powerpc-e300c3-linux-gnu-gcc
>
> declare -x CROSS_COMPILE = "powerpc-e300c3-linux-gnu-"
> declare -x CC = "$ CROSS_COMPILE" gcc
> declare -x CXX = "$ CROSS_COMPILE" g ++
> declare -x CPP = "$ CROSS_COMPILE" cpp
> declare -x STRIP = "$ CROSS_COMPILE" strip
> declare -x RANLIB = "$ CROSS_COMPILE" ranlib
> declare -x AR = "$ CROSS_COMPILE" ar
> declare -x AS = "$ CROSS_COMPILE" as
> declare -x NM = "$ CROSS_COMPILE" nm
> declare -x LD = "$ CROSS_COMPILE" ld
> export LDFLAGS = -L / home / common / ltib-mpc83xx / mpc8308erdb / rootfs
> / usr / lib
>
> export ac_cv_sizeof_ssize_t = 4
> export ac_cv_lib_z_inflateReset = yes
> ./configure --target = powerpc --with-lib-subdir = / home / common /
> ltib-mpc83xx / mpc8308erdb / rootfs / usr / lib --with-gcc-arch = powerpc
> --host = powerpc-e300c3-linux -gnu \
> ac_cv_file__dev_ptmx = yes --disable-core-libedit-support
> --without-apr-util
>
>
> What could be the reason for such behavior?
>
>
> Best Regards,
> Appalonov Andrei.
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-dev mailing list
> FreeSWITCH-dev at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
> http://www.freeswitch.org
>
>
--
Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ ☞ http://cluecon.com/ ☞
http://twitter.com/FreeSWITCH
☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+
<http://freeswitch.org/g+>*
ClueCon Weekly Development Call
☎ sip:888 at conference.freeswitch.org ☎ +19193869900
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-dev/attachments/20141201/5f4af74e/attachment.html
Join us at ClueCon 2014 Aug 4-7, 2014
More information about the FreeSWITCH-dev
mailing list