[Freeswitch-dev] [Freeswitch-users] About the display problem during calling
sparklezou at 163.com
Fri Nov 30 16:11:45 MSK 2012
Hi Develop team,
Just simlify this question.
In the message 100, 180,183, 200 response to the caller side from Freeswitch side, the called part Name should be include in the sip address of "To" & SDP part. It should be "ABC"<sip: 1234 at a.b.c.d>, NOT only <sip: 1234 at a.b.c.d>.
Currently, at the called part, the caller info is correct with Name. So the display at called side is OK.
Could you please let me know where is the source code for such process? I also would like to review it.
主题：Re: [Freeswitch-users] About the display problem during calling
收件人："freeswitch-dev"<freeswitch-dev at lists.freeswitch.org>
抄送："freeswitch-users"<freeswitch-users at lists.freeswitch.org>
Before, I saved the user name in the phone. So it will show the name when ringing.
From the FreeSwitch side, there is NO difference.
@ Develop Team,
For Internal call, or any sip call from gateway, it should be better show the Name during ring. And also keep show the name in the call, in stead of "Outbound Call".
Usually the phone will update the display name from the sip response message.
So in the 100, 180, 183, 200 sip/sdp message. Respons with the called name, like "ABC"<sip: 1234 at a.b.c.d>.
Currently in the inital 100,180,183 message, only <sip: 1234 at a.b.c.d>. In the 200 message "Remote-Part-ID: "Outbound Call" <sip: 1234 at a.b.c.d>; ....... "
If it could be updated, then the called name could be displayed on the caller phone.
主题：[Freeswitch-users] About the display problem during calling
收件人："freeswitch-users"<freeswitch-users at lists.freeswitch.org>,"freeswitch-dev"<freeswitch-dev at lists.freeswitch.org>
I facing a strange problem.
Before, when calling Internal number, the name and number will both be displayed on the caller phone. When connected, only the name will display on the phone. At called phone, display the name and number. Seems fine.
But yesterday afternoon, when calling Internal number, only the number is displayed on the caller phone. When connected, display "Outbound Call" on the caller phone. At the called phone, everthing is the same. Display both the name and number.
I think, mabybe something configured wrong. So I try to restore back the configuration. seems the same. I have to re-install the last release stable 188.8.131.52 version on another server. total fresh setting. But found the same problem.
I checked the sip info.
The "Outbound Call" is in the 200 SDP message. the called is set to
""Remote-Part-ID: "Outbound Call" <sip: 1234 at a.b.c.d>; ....... "
Not the correct called name.
Is there anything wrong?
Please help me.
-------------- next part --------------
An HTML attachment was scrubbed...
Join us at ClueCon 2011 Aug 9-11, 2011
More information about the FreeSWITCH-dev