[Freeswitch-dev] Inbound Event Socket
Bob Coleman
bobc at devassert.com
Mon May 17 20:02:35 PDT 2010
The setup is simple so will include it.
I am running 1.6 downloaded as source and compiled in VS2008, havent
tested against the latest, as occasionally there are compiled problems
with trunk.
Use a stock install, no changes, with this added as a dialplan.
<include>
<extension name="ivr_805">
<condition field="destination_number" expression="^805$">
<action application="set" data="instant_ringback=true"/>
<action application="ring_ready" />
<action application="socket" data="127.0.0.1:4573 full"/>
</condition>
</extension>
</include>
Running the compiled freeswitch exe I type the following in the console window
originate sofia/gateway/<mygateway>/<my phone> 805
That seems to execute as async after transfering to 805, although
based on what Anthony said I might be wrong.
If you use the following it behaves as normal ie. sync mode after
transfering to 805
originate {ignore_early_media=true}sofia/gateway/<mygateway>/<my phone> 805
Thanks
Bob
On Tue, May 18, 2010 at 11:45 AM, Michael Collins <msc at freeswitch.org> wrote:
> I would like to confirm this behavior on a my system. Can you whip up a
> minimal set of configs to reproduce this? Put it on pastebin.freeswitch.org.
> We'll see if we can reproduce. Also, please confirm that you are running the
> latest git-head so that we are doing apples-to-apples comparison.
>
> Thanks,
> MC
>
> On Mon, May 17, 2010 at 3:26 PM, Bob Coleman <bobc at devassert.com> wrote:
>>
>> Ok, will check that.
>>
>> I subscribe to the call answered event and wait for that before doing
>> ivr things, I play a prompt then go to get a key response and it just
>> skips straight past the message sent, no timeout or anything, and
>> obviously not waiting for the user. The user presses a key and it
>> doesnt go anywhere due to the program having completed.
>>
>> On Tue, May 18, 2010 at 10:18 AM, Anthony Minessale
>> <anthony.minessale at gmail.com> wrote:
>> > that does not mean if you are in sync mode or async, the reply on the
>> > event
>> > socket initial message after you enter connect does.
>> > If you are doing ivr type things before you have media established its
>> > possible it's simply failing.
>> >
>> > On Mon, May 17, 2010 at 4:53 PM, Bob Coleman <bobc at devassert.com> wrote:
>> >>
>> >> I tried specifying async full to confirm it was giving me the same
>> >> result, and it does.
>> >>
>> >> I put break points into our code where it sends a message to fs, in
>> >> sync mode it waits for the timeout or until the user presses a key,
>> >> but in async mode it just returns as expected, immediately.
>> >>
>> >> I expected it to be in sync mode, as all our inbound calls come thru
>> >> in this fashion, and work fine.
>> >>
>> >> If ignore_early_media=true is used for the originate it obeys the
>> >> dialplan, and operates in sync mode.
>> >>
>> >> On Tue, May 18, 2010 at 9:33 AM, Anthony Minessale
>> >> <anthony.minessale at gmail.com> wrote:
>> >> > try actually specifying sync full not just omitting it.
>> >> > how are you determining that you are ending up in async mode?
>> >> >
>> >> > On Mon, May 17, 2010 at 4:15 PM, Bob Coleman <bobc at devassert.com>
>> >> > wrote:
>> >> >>
>> >> >> Sorry guys. I might not understand myself.
>> >> >>
>> >> >> The scenario is I want to make an outbound call(via an inbound
>> >> >> socket)
>> >> >> and connect it back to an outbound socket for processing.
>> >> >>
>> >> >> So to test this, I typed into the FreeSWITCH console the originate
>> >> >> command, just like I would have via the inbound socket. and was able
>> >> >> to make a call to a mobile phone, and have it connect back to an
>> >> >> outbound socket, but to my surprise it was now in async mode. I had
>> >> >> written the outbound socket to be sync, and there was no async
>> >> >> command
>> >> >> in the dialplan that handled the extension I had transfered the call
>> >> >> too. Once the call is made I am not doing anything else to it via
>> >> >> the
>> >> >> inbound socket, just letting the call run its course through our
>> >> >> callflow app.
>> >> >>
>> >> >> I guess I am wondering if I am doing this the right way, or I have
>> >> >> missed something and there is an easier way.
>> >> >>
>> >> >> Thanks
>> >> >>
>> >> >> Bob
>> >> >>
>> >> >> On Tue, May 18, 2010 at 3:37 AM, Michael S Collins
>> >> >> <msc at freeswitch.org>
>> >> >> wrote:
>> >> >> > Are you trying to originate from a program with inbound event
>> >> >> > socket
>> >> >> > and
>> >> >> > then and also have the same program handle the other call leg
>> >> >> > (805)
>> >> >> > using
>> >> >> > outbound event socket? Same port? Please clarify like Tony said.
>> >> >> > -MC
>> >> >> >
>> >> >> > Sent from my iPhone
>> >> >> > On May 17, 2010, at 8:13 AM, Anthony Minessale
>> >> >> > <anthony.minessale at gmail.com>
>> >> >> > wrote:
>> >> >> >
>> >> >> > I read this like 5 times and I could not understand what you are
>> >> >> > trying
>> >> >> > to
>> >> >> > ask.
>> >> >> > Could you rephrase with more detail?
>> >> >> >
>> >> >> > On Sun, May 16, 2010 at 6:54 PM, Bob Coleman <bobc at devassert.com>
>> >> >> > wrote:
>> >> >> >>
>> >> >> >> Hi,
>> >> >> >>
>> >> >> >> Is there a reason why an orginate command typed into the
>> >> >> >> freeswitch
>> >> >> >> console overrides the dialplan socket application(<action
>> >> >> >> application="socket" data="127.0.0.1:4573 full"/>) with async
>> >> >> >> eg originate sofia/gateway/????/???? 805
>> >> >> >>
>> >> >> >> 805 being the extension the outbound event socket is fired from.
>> >> >> >>
>> >> >> >> I have noticed that if the {ignore_early_media=true} is set that
>> >> >> >> it
>> >> >> >> behaves correctly and does not override with async.
>> >> >> >>
>> >> >> >> I am using the 1.6 version source compiled locally on a windows
>> >> >> >> box,
>> >> >> >> and a extension of 805 setup with the above outbound socket
>> >> >> >> connection.
>> >> >> >>
>> >> >> >> Regards
>> >> >> >>
>> >> >> >> Bob
>> >> >> >>
>> >> >> >> _______________________________________________
>> >> >> >> FreeSWITCH-dev mailing list
>> >> >> >> FreeSWITCH-dev at lists.freeswitch.org
>> >> >> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
>> >> >> >>
>> >> >> >>
>> >> >> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
>> >> >> >> http://www.freeswitch.org
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > --
>> >> >> > Anthony Minessale II
>> >> >> >
>> >> >> > FreeSWITCH http://www.freeswitch.org/
>> >> >> > ClueCon http://www.cluecon.com/
>> >> >> > Twitter: http://twitter.com/FreeSWITCH_wire
>> >> >> >
>> >> >> > AIM: anthm
>> >> >> > MSN:anthony_minessale at hotmail.com
>> >> >> > GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com
>> >> >> > IRC: irc.freenode.net #freeswitch
>> >> >> >
>> >> >> > FreeSWITCH Developer Conference
>> >> >> > sip:888 at conference.freeswitch.org
>> >> >> > googletalk:conf+888 at conference.freeswitch.org
>> >> >> > pstn:+19193869900
>> >> >> >
>> >> >> > _______________________________________________
>> >> >> > FreeSWITCH-dev mailing list
>> >> >> > FreeSWITCH-dev at lists.freeswitch.org
>> >> >> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
>> >> >> >
>> >> >> >
>> >> >> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
>> >> >> > http://www.freeswitch.org
>> >> >> >
>> >> >> > _______________________________________________
>> >> >> > FreeSWITCH-dev mailing list
>> >> >> > FreeSWITCH-dev at lists.freeswitch.org
>> >> >> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
>> >> >> >
>> >> >> >
>> >> >> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
>> >> >> > http://www.freeswitch.org
>> >> >> >
>> >> >> >
>> >> >>
>> >> >> _______________________________________________
>> >> >> FreeSWITCH-dev mailing list
>> >> >> FreeSWITCH-dev at lists.freeswitch.org
>> >> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
>> >> >>
>> >> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
>> >> >> http://www.freeswitch.org
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> > Anthony Minessale II
>> >> >
>> >> > FreeSWITCH http://www.freeswitch.org/
>> >> > ClueCon http://www.cluecon.com/
>> >> > Twitter: http://twitter.com/FreeSWITCH_wire
>> >> >
>> >> > AIM: anthm
>> >> > MSN:anthony_minessale at hotmail.com
>> >> > GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com
>> >> > IRC: irc.freenode.net #freeswitch
>> >> >
>> >> > FreeSWITCH Developer Conference
>> >> > sip:888 at conference.freeswitch.org
>> >> > googletalk:conf+888 at conference.freeswitch.org
>> >> > pstn:+19193869900
>> >> >
>> >> > _______________________________________________
>> >> > FreeSWITCH-dev mailing list
>> >> > FreeSWITCH-dev at lists.freeswitch.org
>> >> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
>> >> >
>> >> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
>> >> > http://www.freeswitch.org
>> >> >
>> >> >
>> >>
>> >> _______________________________________________
>> >> FreeSWITCH-dev mailing list
>> >> FreeSWITCH-dev at lists.freeswitch.org
>> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
>> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
>> >> http://www.freeswitch.org
>> >
>> >
>> >
>> > --
>> > Anthony Minessale II
>> >
>> > FreeSWITCH http://www.freeswitch.org/
>> > ClueCon http://www.cluecon.com/
>> > Twitter: http://twitter.com/FreeSWITCH_wire
>> >
>> > AIM: anthm
>> > MSN:anthony_minessale at hotmail.com
>> > GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com
>> > IRC: irc.freenode.net #freeswitch
>> >
>> > FreeSWITCH Developer Conference
>> > sip:888 at conference.freeswitch.org
>> > googletalk:conf+888 at conference.freeswitch.org
>> > pstn:+19193869900
>> >
>> > _______________________________________________
>> > FreeSWITCH-dev mailing list
>> > FreeSWITCH-dev at lists.freeswitch.org
>> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
>> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
>> > http://www.freeswitch.org
>> >
>> >
>>
>> _______________________________________________
>> FreeSWITCH-dev mailing list
>> FreeSWITCH-dev at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
>> http://www.freeswitch.org
>
>
> _______________________________________________
> FreeSWITCH-dev mailing list
> FreeSWITCH-dev at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
> http://www.freeswitch.org
>
>
More information about the FreeSWITCH-dev
mailing list