[Freeswitch-dev] OpenZap crash on startup ....

Irshad Ahamed irshad.fswitch at gmail.com
Tue Jun 3 10:23:33 EDT 2008 

I tested with zaptel-1.4.2 that showed as per what wiki says(Channels
configured). But I tested randomly picking zaptel-1.4.9 and zaptel-1.4.11
that showed the behaviour which you mentioned here(Channels to configure). I
am not sure if it's really making calls to go mad coz FS configures the
channels properly on running.

BR,
Irshad.

On Tue, Jun 3, 2008 at 11:10 AM, <comments at freecle.com> wrote:

>
> Further note --
>
> This problem was reported on an asterisk board last February.  The
> reported fix was to run the "setup-pstn" program, which is apparently an
> asterisk thing.  However, I can't seem to find it, even after installing
> asterisk and poking around digium.com.  Can someone tell me what this does
> and where I can get it?  Thanks.
>
> edward
>
>
>
> >
> >
> > Apart from freeswitch, my install of the zaptel drivers may be the
> > problem.
> > When doing ztcfg -vv, I get the message "4 channels to be configured" or
> > words to that effect ....   however, the TDM400  wiki shows the message
> as
> > "4 channels configured" ... not "to be configured" ...
> >
> > can someone explain why ztcgf might be saying "to be" in this case?
> >
> >
> >
> >> yeah...
> >>
> >> On Mon, Jun 2, 2008 at 4:17 PM, David Bowerman
> >> <david.bowerman at gmail.com>
> >> wrote:
> >>
> >>> from fs-1.0.0?
> >>>
> >>>
> >>> On Mon, Jun 2, 2008 at 8:43 PM, Irshad Ahamed
> >>> <irshad.fswitch at gmail.com>
> >>> wrote:
> >>>
> >>>> Can you pastebin the Freeswitch logs for the outbound and inbound
> >>>> calls?
> >>>>
> >>>> BR,
> >>>> Irshad.
> >>>>
> >>>>
> >>>> On Mon, Jun 2, 2008 at 10:42 AM, David Bowerman
> >>>> <david.bowerman at gmail.com>
> >>>> wrote:
> >>>>
> >>>>> thanks Mike,
> >>>>> it looks like zaptel-1.4.11 is ok, however on dialing out on tdm400p
> >>>>> fxo
> >>>>> channels i see :-
> >>>>>
> >>>>> 2008-06-02 15:07:31 [WARNING] zap_analog.c:52
> >>>>> analog_fxo_outgoing_call()
> >>>>> VETO Changing state on 1:1 from DOWN to DIALING
> >>>>>
> >>>>> the call nevers happens, i assume because i havent adjusted the tones
> >>>>> in
> >>>>> openzap/tones.conf for australian pstn, but i dont understand what
> >>>>> the
> >>>>> VETO
> >>>>> warning is...
> >>>>>
> >>>>> regards
> >>>>>
> >>>>> dave
> >>>>>
> >>>>> On Mon, Jun 2, 2008 at 1:08 PM, Michael Jerris <mike at jerris.com>
> >>>>> wrote:
> >>>>>
> >>>>>>
> >>>>>> On Jun 1, 2008, at 9:29 PM, David Bowerman wrote:
> >>>>>>
> >>>>>> OpenZAP is giving me grief too.
> >>>>>> I'm on the verge of shifting all my asterisk stuff to freeswitch,
> >>>>>> but
> >>>>>> i
> >>>>>> need my TDM400P to work.
> >>>>>>
> >>>>>> does anyone know :-
> >>>>>>
> >>>>>> * which openzap should be used? the one bundled with fs 1.0, or the
> >>>>>> one
> >>>>>> in trunk?
> >>>>>>
> >>>>>>
> >>>>>> It builds automatically when you build mod_openzap.  Just uncomment
> >>>>>> the
> >>>>>> module in your modules.conf in your source.
> >>>>>>
> >>>>>> * is it dependant on a particular version of zaptel. Im using the
> >>>>>> latest, but the wiki refers to 1.4.2
> >>>>>>
> >>>>>>
> >>>>>> We have tested it with 1.4.2.  I t should work with other versions
> >>>>>> as
> >>>>>> long as they are not changing the interface in a non backwards
> >>>>>> compatible
> >>>>>> way, which i doubt has been done.  It will almost definitely need a
> >>>>>> new
> >>>>>> interface to handle the new dahdi that will be replacing zaptel.
> >>>>>>
> >>>>>> There should be enough info for you to get it setup at:
> >>>>>> http://wiki.freeswitch.org/wiki/OpenZAP
> >>>>>>
> >>>>>>
> >>>>>> Mike
> >>>>>>
> >>>>>>
> >>>>>> regards
> >>>>>>
> >>>>>> Dave.
> >>>>>>
> >>>>>> On Mon, Jun 2, 2008 at 11:19 AM, Michael Jerris <mike at jerris.com>
> >>>>>> wrote:
> >>>>>>
> >>>>>>> Those errors would indicate that the openzap configuration is not
> >>>>>>> in
> >>>>>>> place.  There are some example configurations on the wiki at
> >>>>>>> http://wiki.freeswitch.org/wiki/OpenZAP
> >>>>>>>
> >>>>>>> Mike
> >>>>>>>
> >>>>>>> On Jun 1, 2008, at 4:46 PM, comments at freecle.com wrote:
> >>>>>>>
> >>>>>>> >
> >>>>>>> > sorry ... use of "crash" was melodramatic .... it is failure to
> >>>>>>> load
> >>>>>>> >
> >>>>>>> > It is working fine with x-lite and a sip provider...
> >>>>>>> >
> >>>>>>> > edward
> >>>>>>> >
> >>>>>>> >
> >>>>>>> >> Does it actually crash, or does it just fail to load because its
> >>>>>>> not
> >>>>>>> >> configured?
> >>>>>>> >>
> >>>>>>> >> Mike
> >>>>>>> >> On Jun 1, 2008, at 3:53 AM, comments at freecle.com wrote:
> >>>>>>> >>
> >>>>>>> >>> Phoenix runs fine before openzap and TDM400P x 4 FXO
> >>>>>>> >>> installation ....
> >>>>>>> >>> then....
> >>>>>>> >>>
> >>>>>>> >>> 2008-05-31 12:39:05 [ERR] zap_io.c:2082 process_module_config()
> >>>>>>> >>> Cannot ope
> >>>>>>> >>> n wanpipe.conf
> >>>>>>> >>> 2008-05-31 12:39:05 [ERR] zap_io.c:2082 process_module_config()
> >>>>>>> >>> Cannot ope
> >>>>>>> >>> n zt.conf
> >>>>>>> >>> 2008-05-31 12:39:05 [ERR] zap_io.c:2155 zap_global_init() No
> >>>>>>> modules
> >>>>>>> >>> confi
> >>>>>>> >>> gured!
> >>>>>>> >>> 2008-05-31 12:39:05 [ERR] mod_openzap.c:1861 mod_openzap_load()
> >>>>>>> >>> Error load
> >>>>>>> >>> ing OpenZAP
> >>>>>>> >>> 2008-05-31 12:39:05 [CRIT] switch_loadable_module.c:734
> >>>>>>> >>> switch_loadable_mo
> >>>>>>> >>> dule_load_file() Error Loading module
> >>>>>>> >>> /usr/local/freeswitch/mod/mod_openzap.so
> >>>>>>> >>> **Module load routine returned an error**
> >>>>>>> >>>
> >>>>>>> >>> I thought I followed the Wiki configuration for openzap.  Any
> >>>>>>> >>> suggestions?
> >>>>>>> >>> Thanks.
> >>>>>>> >>>
> >>>>>>> >>> Edward
> >>>>>>> >>> Seattle
> >>>>>>> >>>
> >>>>>>> >>>
> >>>>>>> >>> _______________________________________________
> >>>>>>> >>> Freeswitch-dev mailing list
> >>>>>>> >>> Freeswitch-dev at lists.freeswitch.org
> >>>>>>> >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> >>>>>>> >>> UNSUBSCRIBE:
> >>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-dev
> >>>>>>> >>> http://www.freeswitch.org
> >>>>>>> >>
> >>>>>>> >>
> >>>>>>> >> _______________________________________________
> >>>>>>> >> Freeswitch-dev mailing list
> >>>>>>> >> Freeswitch-dev at lists.freeswitch.org
> >>>>>>> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> >>>>>>> >> UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-
> >>>>>>> >> dev
> >>>>>>> >> http://www.freeswitch.org
> >>>>>>> >>
> >>>>>>> >
> >>>>>>> >
> >>>>>>> >
> >>>>>>> > _______________________________________________
> >>>>>>> > Freeswitch-dev mailing list
> >>>>>>> > Freeswitch-dev at lists.freeswitch.org
> >>>>>>> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> >>>>>>> > UNSUBSCRIBE:
> >>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-dev
> >>>>>>> > http://www.freeswitch.org
> >>>>>>>
> >>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> Freeswitch-dev mailing list
> >>>>>>> Freeswitch-dev at lists.freeswitch.org
> >>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> >>>>>>> UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-dev
> >>>>>>> http://www.freeswitch.org
> >>>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> Freeswitch-dev mailing list
> >>>>>> Freeswitch-dev at lists.freeswitch.org
> >>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> >>>>>> UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-dev
> >>>>>> http://www.freeswitch.org
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> Freeswitch-dev mailing list
> >>>>>> Freeswitch-dev at lists.freeswitch.org
> >>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> >>>>>> UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-dev
> >>>>>> http://www.freeswitch.org
> >>>>>>
> >>>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> Freeswitch-dev mailing list
> >>>>> Freeswitch-dev at lists.freeswitch.org
> >>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> >>>>> UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-dev
> >>>>> http://www.freeswitch.org
> >>>>>
> >>>>>
> >>>>
> >>>> _______________________________________________
> >>>> Freeswitch-dev mailing list
> >>>> Freeswitch-dev at lists.freeswitch.org
> >>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> >>>> UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-dev
> >>>> http://www.freeswitch.org
> >>>>
> >>>>
> >>>
> >>> _______________________________________________
> >>> Freeswitch-dev mailing list
> >>> Freeswitch-dev at lists.freeswitch.org
> >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> >>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
> >>> http://www.freeswitch.org
> >>>
> >>>
> >> _______________________________________________
> >> Freeswitch-dev mailing list
> >> Freeswitch-dev at lists.freeswitch.org
> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
> >> http://www.freeswitch.org
> >>
> >
> >
> >
> > _______________________________________________
> > Freeswitch-dev mailing list
> > Freeswitch-dev at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
> > http://www.freeswitch.org
> >
>
>
>
> _______________________________________________
> Freeswitch-dev mailing list
> Freeswitch-dev at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-dev/attachments/20080603/56f09b7c/attachment-0001.html

More information about the Freeswitch-dev mailing list