[Freeswitch-branches] [commit] r11891 - freeswitch/branches/gmaruzz/mod_skypiax/asterisk
FreeSWITCH SVN
gmaruzz at freeswitch.org
Wed Feb 11 12:47:34 PST 2009
Author: gmaruzz
Date: Wed Feb 11 14:47:34 2009
New Revision: 11891
Log:
skypiax: corrected type in config file, a tcp port was used twice
Modified:
freeswitch/branches/gmaruzz/mod_skypiax/asterisk/skypiax.conf
Modified: freeswitch/branches/gmaruzz/mod_skypiax/asterisk/skypiax.conf
==============================================================================
--- freeswitch/branches/gmaruzz/mod_skypiax/asterisk/skypiax.conf (original)
+++ freeswitch/branches/gmaruzz/mod_skypiax/asterisk/skypiax.conf Wed Feb 11 14:47:34 2009
@@ -1,121 +1,207 @@
-;;
-;;
-; Skypiax Asterisk Driver
-;
-; Configuration file
-; lines beginning with semicolon (" are ignored (commented out)
-;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;
-; The first interface (named skypeclient)
-[skypeclient]
-;;;;;;;;;;;;;;;;;;;;;;;;;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; general settings, valid on all platforms
-;
-;
-; Default language
-;
+;;;;;;;;
+;;;;;;;;
+;;;;;;; Skypiax Asterisk Driver
+;;;;;;;
+;;;;;;; Configuration file
+;;;;;;; lines beginning with semicolon (" are ignored (commented out)
+;;;;;;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;;;;;;
+;;;;;;; The first interface (named skypeclient)
+;;;;;;[skypeclient]
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;;;;;; general settings, valid on all platforms
+;;;;;;;
+;;;;;;;
+;;;;;;; Default language
+;;;;;;;
+;;;;;;language=en
+;;;;;;;
+;;;;;;; Default context (in extensions.conf, can be overridden with @context syntax)
+;;;;;;;
+;;;;;;context=default
+;;;;;;;
+;;;;;;; Default extension (in extensions.conf) where incoming calls land
+;;;;;;;
+;;;;;;extension=s
+;;;;;;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;;;;;; Debugging settings, valid globally for all interfaces on all platforms
+;;;;;;;
+;;;;;;; the debug values are global for all the interfaces.
+;;;;;;;
+;;;;;;; default is no skypiax debugging output, you **have** to activate debugging here to obtain debugging from skypiax
+;;;;;;;
+;;;;;;; To see the debugging output you have to "set debug 100" from the Asterisk CLI or launch
+;;;;;;; Asterisk with -ddddddddddd option, and have the logger.conf file activating debug info for console and messages
+;;;;;;;
+;;;;;;; You can activate each of the following separately, but you can't disactivate. Eg: debug_at=no does not subtract debug_at from debug_all
+;;;;;;; debug_all activate all possible debugging info
+;;;;;;;
+;;;;;;;debug_all=yes
+;;;;;;debug_skype=yes
+;;;;;;debug_pbx=yes
+;;;;;;;debug_sound=yes
+;;;;;;;debug_locks=yes
+;;;;;;;debug_monitorlocks=yes
+;;;;;;
+;;;;;;skype=yes ; legacy setting, leave it to yes
+;;;;;;X11_display=:101
+;;;;;;tcp_cli_port=11234
+;;;;;;tcp_srv_port=11235
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;;;;;; audio boost settings, valid for all platforms, to compensate for different input/output audio signal levels
+;;;;;;; tweak it if you get horrible (or not hearable) sound
+;;;;;;;
+;;;;;;;boost can be positive or negative (-40 to +40) in db
+;;;;;;;experiment to find which values are best for your computer
+;;;;;;playback_boost=0 ;
+;;;;;;capture_boost=0 ;
+;;;;;;
+;;; [skypiax1]
+;;; language=en
+;;; context=default
+;;; extension=s
+;;; debug_skype=yes
+;;; debug_pbx=yes
+;;; skype=yes ; legacy setting, leave it to yes
+;;; playback_boost=0 ;
+;;; capture_boost=0 ;
+;;; X11_display=:101
+;;; tcp_cli_port=15576
+;;; tcp_srv_port=15577
+;;; skype_user=skypiax1
+;;;
+;;; [skypiax2]
+;;; language=en
+;;; context=default
+;;; extension=s
+;;; debug_skype=yes
+;;; debug_pbx=yes
+;;; skype=yes ; legacy setting, leave it to yes
+;;; playback_boost=0 ;
+;;; capture_boost=0 ;
+;;; X11_display=:102
+;;; tcp_cli_port=15578
+;;; tcp_srv_port=15579
+;;; skype_user=skypiax2
+;;;
+;;; [skypiax3]
+;;; language=en
+;;; context=default
+;;; extension=s
+;;; debug_skype=yes
+;;; debug_pbx=yes
+;;; skype=yes ; legacy setting, leave it to yes
+;;; playback_boost=0 ;
+;;; capture_boost=0 ;
+;;; X11_display=:103
+;;; tcp_cli_port=15580
+;;; tcp_srv_port=15581
+;;; skype_user=skypiax3
+;;;
+[skypiax4]
language=en
-;
-; Default context (in extensions.conf, can be overridden with @context syntax)
-;
context=default
-;
-; Default extension (in extensions.conf) where incoming calls land
-;
extension=s
-;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Debugging settings, valid globally for all interfaces on all platforms
-;
-; the debug values are global for all the interfaces.
-;
-; default is no skypiax debugging output, you **have** to activate debugging here to obtain debugging from skypiax
-;
-; To see the debugging output you have to "set debug 100" from the Asterisk CLI or launch
-; Asterisk with -ddddddddddd option, and have the logger.conf file activating debug info for console and messages
-;
-; You can activate each of the following separately, but you can't disactivate. Eg: debug_at=no does not subtract debug_at from debug_all
-; debug_all activate all possible debugging info
-;
-;debug_all=yes
debug_skype=yes
debug_pbx=yes
-;debug_sound=yes
-;debug_locks=yes
-;debug_monitorlocks=yes
+skype=yes ; legacy setting, leave it to yes
+playback_boost=0 ;
+capture_boost=0 ;
+X11_display=:104
+tcp_cli_port=15582
+tcp_srv_port=15583
+skype_user=skypiax4
+[skypiax5]
+language=en
+context=default
+extension=s
+debug_skype=yes
+debug_pbx=yes
+skype=yes ; legacy setting, leave it to yes
+playback_boost=0 ;
+capture_boost=0 ;
+X11_display=:105
+tcp_cli_port=15584
+tcp_srv_port=15585
+skype_user=skypiax5
+
+[skypiax6]
+language=en
+context=default
+extension=s
+debug_skype=yes
+debug_pbx=yes
skype=yes ; legacy setting, leave it to yes
-X11_display=:101
-tcp_cli_port=11234
-tcp_srv_port=11235
-skype_user=gmaruzz2
-;;;;;;;;;;;;;;;;;;;;;;;;;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; audio boost settings, valid for all platforms, to compensate for different input/output audio signal levels
-; tweak it if you get horrible (or not hearable) sound
-;
-;boost can be positive or negative (-40 to +40) in db
-;experiment to find which values are best for your computer
playback_boost=0 ;
capture_boost=0 ;
+X11_display=:106
+tcp_cli_port=15586
+tcp_srv_port=16586
+skype_user=skypiax6
-;;;[skypeclient2]
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;;;; general settings, valid on all platforms
-;;;;
-;;;;
-;;;; Default language
-;;;;
-;;;language=en
-;;;;
-;;;; Default context (in extensions.conf, can be overridden with @context syntax)
-;;;;
-;;;context=default
-;;;;
-;;;; Default extension (in extensions.conf) where incoming calls land
-;;;;
-;;;extension=s
-;;;;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;;;; Debugging settings, valid globally for all interfaces on all platforms
-;;;;
-;;;; the debug values are global for all the interfaces.
-;;;;
-;;;; default is no skypiax debugging output, you **have** to activate debugging here to obtain debugging from skypiax
-;;;;
-;;;; To see the debugging output you have to "set debug 100" from the Asterisk CLI or launch
-;;;; Asterisk with -ddddddddddd option, and have the logger.conf file activating debug info for console and messages
-;;;;
-;;;; You can activate each of the following separately, but you can't disactivate. Eg: debug_at=no does not subtract debug_at from debug_all
-;;;; debug_all activate all possible debugging info
-;;;;
-;;;;debug_all=yes
-;;;debug_skype=yes
-;;;debug_pbx=yes
-;;;;debug_sound=yes
-;;;;debug_locks=yes
-;;;;debug_monitorlocks=yes
-;;;
-;;;skype=yes ; legacy setting, leave it to yes
-;;;X11_display=:102
-;;;tcp_cli_port=11236
-;;;tcp_srv_port=11237
-;;;skype_user=gmaruzz3
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;;;; audio boost settings, valid for all platforms, to compensate for different input/output audio signal levels
-;;;; tweak it if you get horrible (or not hearable) sound
-;;;;
-;;;;boost can be positive or negative (-40 to +40) in db
-;;;;experiment to find which values are best for your computer
-;;;playback_boost=0 ;
-;;;capture_boost=0 ;
-;;;
-;;;
+;;; [skypiax17]
+;;; language=en
+;;; context=default
+;;; extension=s
+;;; debug_skype=yes
+;;; debug_pbx=yes
+;;; skype=yes ; legacy setting, leave it to yes
+;;; playback_boost=0 ;
+;;; capture_boost=0 ;
+;;; X11_display=:117
+;;; tcp_cli_port=15587
+;;; tcp_srv_port=15588
+;;; skype_user=skypiax17
+;;;
+;;; [skypiax18]
+;;; language=en
+;;; context=default
+;;; extension=s
+;;; debug_skype=yes
+;;; debug_pbx=yes
+;;; skype=yes ; legacy setting, leave it to yes
+;;; playback_boost=0 ;
+;;; capture_boost=0 ;
+;;; X11_display=:118
+;;; tcp_cli_port=15589
+;;; tcp_srv_port=15590
+;;; skype_user=skypiax18
+;;;
+;;; [skypiax19]
+;;; language=en
+;;; context=default
+;;; extension=s
+;;; debug_skype=yes
+;;; debug_pbx=yes
+;;; skype=yes ; legacy setting, leave it to yes
+;;; playback_boost=0 ;
+;;; capture_boost=0 ;
+;;; X11_display=:119
+;;; tcp_cli_port=15591
+;;; tcp_srv_port=15592
+;;; skype_user=skypiax19
+;;;
+;;; [skypiax20]
+;;; language=en
+;;; context=default
+;;; extension=s
+;;; debug_skype=yes
+;;; debug_pbx=yes
+;;; skype=yes ; legacy setting, leave it to yes
+;;; playback_boost=0 ;
+;;; capture_boost=0 ;
+;;; X11_display=:120
+;;; tcp_cli_port=15593
+;;; tcp_srv_port=15594
+;;; skype_user=skypiax20
+;;;
+;;;
+;;;
More information about the Freeswitch-branches
mailing list