[Freeswitch-branches] [commit] r6755 - in freeswitch/branches/stkn/sofia-exp/trunk: . conf conf/autoload_configs conf/lang/en/vm conf/sip_profiles libs/libedit libs/libedit/doc libs/libedit/examples libs/libedit/src src src/include src/mod/applications/mod_dptools src/mod/event_handlers/mod_cdr_csv
Freeswitch SVN
stkn at freeswitch.org
Thu Dec 13 12:16:18 EST 2007
Author: stkn
Date: Thu Dec 13 12:16:17 2007
New Revision: 6755
Added:
freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/configure.gnu
- copied unchanged from r6752, /freeswitch/trunk/libs/libedit/configure.gnu
Removed:
freeswitch/branches/stkn/sofia-exp/trunk/conf/autoload_configs/cdr.conf.xml
freeswitch/branches/stkn/sofia-exp/trunk/conf/default_context_old.xml
Modified:
freeswitch/branches/stkn/sofia-exp/trunk/Freeswitch.2008.sln
freeswitch/branches/stkn/sofia-exp/trunk/Makefile.am
freeswitch/branches/stkn/sofia-exp/trunk/bootstrap.sh
freeswitch/branches/stkn/sofia-exp/trunk/conf/lang/en/vm/sounds.xml
freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/default.xml
freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/nat.xml
freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/outbound.xml
freeswitch/branches/stkn/sofia-exp/trunk/configure.in
freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/Makefile.in
freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/aclocal.m4
freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/config.guess
freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/config.sub
freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/configure
freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/doc/Makefile.in
freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/examples/Makefile.in
freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/ltmain.sh
freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/src/Makefile.in
freeswitch/branches/stkn/sofia-exp/trunk/src/include/switch_module_interfaces.h
freeswitch/branches/stkn/sofia-exp/trunk/src/mod/applications/mod_dptools/mod_dptools.c
freeswitch/branches/stkn/sofia-exp/trunk/src/mod/event_handlers/mod_cdr_csv/mod_cdr_csv.c
freeswitch/branches/stkn/sofia-exp/trunk/src/switch_rtp.c
Log:
Merge changes from trunk
Modified: freeswitch/branches/stkn/sofia-exp/trunk/Freeswitch.2008.sln
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/Freeswitch.2008.sln (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/Freeswitch.2008.sln Thu Dec 13 12:16:17 2007
@@ -82,7 +82,6 @@
Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "autoload_configs", "autoload_configs", "{3C90CCF0-2CDD-4A7A-ACFF-208C1E271692}"
ProjectSection(SolutionItems) = preProject
conf\autoload_configs\alsa.conf.xml = conf\autoload_configs\alsa.conf.xml
- conf\autoload_configs\cdr.conf.xml = conf\autoload_configs\cdr.conf.xml
conf\autoload_configs\conference.conf.xml = conf\autoload_configs\conference.conf.xml
conf\autoload_configs\console.conf.xml = conf\autoload_configs\console.conf.xml
conf\autoload_configs\dialplan_directory.conf.xml = conf\autoload_configs\dialplan_directory.conf.xml
@@ -185,7 +184,6 @@
Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "autoload_configs", "autoload_configs", "{4833F8E3-ABBF-4260-9DB1-B34015676CFC}"
ProjectSection(SolutionItems) = preProject
debug\conf\autoload_configs\alsa.conf.xml = debug\conf\autoload_configs\alsa.conf.xml
- debug\conf\autoload_configs\cdr.conf.xml = debug\conf\autoload_configs\cdr.conf.xml
debug\conf\autoload_configs\conference.conf.xml = debug\conf\autoload_configs\conference.conf.xml
debug\conf\autoload_configs\console.conf.xml = debug\conf\autoload_configs\console.conf.xml
debug\conf\autoload_configs\dialplan_directory.conf.xml = debug\conf\autoload_configs\dialplan_directory.conf.xml
@@ -284,7 +282,6 @@
Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "autoload_configs", "autoload_configs", "{8D29085B-952D-4594-9BB9-5781CE552D0A}"
ProjectSection(SolutionItems) = preProject
release\conf\autoload_configs\alsa.conf.xml = release\conf\autoload_configs\alsa.conf.xml
- release\conf\autoload_configs\cdr.conf.xml = release\conf\autoload_configs\cdr.conf.xml
release\conf\autoload_configs\conference.conf.xml = release\conf\autoload_configs\conference.conf.xml
release\conf\autoload_configs\console.conf.xml = release\conf\autoload_configs\console.conf.xml
release\conf\autoload_configs\dialplan_directory.conf.xml = release\conf\autoload_configs\dialplan_directory.conf.xml
Modified: freeswitch/branches/stkn/sofia-exp/trunk/Makefile.am
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/Makefile.am (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/Makefile.am Thu Dec 13 12:16:17 2007
@@ -155,10 +155,7 @@
-
-libs/libedit/Makefile:
- cd libs/libedit && ./configure CFLAGS="-D_XOPEN_SOURCE=600 -D_BSD_SOURCE=1" --disable-shared --with-pic
-libs/libedit/src/.libs/libedit.a: libs/libedit/Makefile
+libs/libedit/src/.libs/libedit.a:
cd libs/libedit && $(MAKE)
$(libfreeswitch_la_SOURCES): $(CORE_LIBS) $(switch_builddir)/quiet_libtool modules.conf
Modified: freeswitch/branches/stkn/sofia-exp/trunk/bootstrap.sh
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/bootstrap.sh (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/bootstrap.sh Thu Dec 13 12:16:17 2007
@@ -4,7 +4,7 @@
BASEDIR=`pwd`;
LIBDIR=${BASEDIR}/libs;
SUBDIRS="codec/g7xx codec/g726 codec/gsm codec/ilbc codec/lpc10 curl iax iksemel \
- js js/nsprpub libdingaling libresample libsndfile pcre sofia-sip \
+ js js/nsprpub libdingaling libedit libresample libsndfile pcre sofia-sip \
speex sqlite srtp xmlrpc-c";
Modified: freeswitch/branches/stkn/sofia-exp/trunk/conf/lang/en/vm/sounds.xml
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/conf/lang/en/vm/sounds.xml (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/conf/lang/en/vm/sounds.xml Thu Dec 13 12:16:17 2007
@@ -54,7 +54,7 @@
<match>
<action function="play-file" data="voicemail/vm-you_have.wav"/>
<action function="say" data="1" method="pronounced" type="items"/>
- <action function="play-file" data="voicemail/vm-$1.wav"/>
+ <action function="play-file" data="voicemail/vm-$2.wav"/>
<action function="play-file" data="voicemail/vm-message.wav"/>
<action function="play-file" data="voicemail/vm-in_folder.wav"/>
</match>
@@ -63,7 +63,7 @@
<match>
<action function="play-file" data="voicemail/vm-you_have.wav"/>
<action function="say" data="$1" method="pronounced" type="items"/>
- <action function="play-file" data="voicemail/vm-$1.wav"/>
+ <action function="play-file" data="voicemail/vm-$2.wav"/>
<action function="play-file" data="voicemail/vm-messages.wav"/>
<action function="play-file" data="voicemail/vm-in_folder.wav"/>
</match>
Modified: freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/default.xml
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/default.xml (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/default.xml Thu Dec 13 12:16:17 2007
@@ -17,7 +17,6 @@
<settings>
<param name="debug" value="0"/>
<param name="sip-trace" value="no"/>
- <param name="log-level" value="0"/>
<param name="context" value="public"/>
<param name="rfc2833-pt" value="101"/>
<param name="sip-port" value="5060"/>
Modified: freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/nat.xml
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/nat.xml (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/nat.xml Thu Dec 13 12:16:17 2007
@@ -7,7 +7,6 @@
<settings>
<param name="debug" value="0"/>
<param name="sip-trace" value="no"/>
- <param name="log-level" value="0"/>
<param name="rfc2833-pt" value="101"/>
<param name="sip-port" value="5070"/>
<param name="dialplan" value="XML"/>
Modified: freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/outbound.xml
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/outbound.xml (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/outbound.xml Thu Dec 13 12:16:17 2007
@@ -12,7 +12,6 @@
<settings>
<param name="debug" value="0"/>
<param name="sip-trace" value="no"/>
- <param name="log-level" value="0"/>
<param name="rfc2833-pt" value="101"/>
<param name="sip-port" value="5080"/>
<param name="dialplan" value="XML"/>
Modified: freeswitch/branches/stkn/sofia-exp/trunk/configure.in
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/configure.in (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/configure.in Thu Dec 13 12:16:17 2007
@@ -401,8 +401,6 @@
[AC_MSG_ERROR([libtermcap, libcurses or libncurses are required!])] )] )
fi
-#AX_LIB_MYSQL([MINIMUM-VERSION])
-AX_LIB_MYSQL
AX_CHECK_JAVA
AM_CONDITIONAL([ADD_ODBC],[test "x$enable_core_odbc_support" != "xno"])
@@ -448,6 +446,9 @@
AC_CONFIG_SUBDIRS(libs/srtp)
AC_CONFIG_SUBDIRS(libs/sqlite)
AC_CONFIG_SUBDIRS(libs/libresample)
+if test "$enable_core_libedit_support" = "yes" ; then
+ AC_CONFIG_SUBDIRS(libs/libedit)
+fi
AC_CONFIG_SUBDIRS(libs/pcre)
AC_CONFIG_SUBDIRS(libs/apr)
AC_CONFIG_SUBDIRS(libs/apr-util)
Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/Makefile.in
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/Makefile.in (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/Makefile.in Thu Dec 13 12:16:17 2007
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -13,15 +13,11 @@
# PARTICULAR PURPOSE.
@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
@@ -35,18 +31,18 @@
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
+subdir = .
DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure COPYING ChangeLog INSTALL THANKS \
config.guess config.sub depcomp install-sh ltmain.sh missing
-subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
+ configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
@@ -54,10 +50,13 @@
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
- install-exec-recursive install-info-recursive \
- install-recursive installcheck-recursive installdirs-recursive \
- pdf-recursive ps-recursive uninstall-info-recursive \
- uninstall-recursive
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
@@ -74,8 +73,6 @@
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
@@ -103,6 +100,7 @@
F77 = @F77@
FFLAGS = @FFLAGS@
GREP = @GREP@
+INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -116,6 +114,7 @@
LT_VERSION = @LT_VERSION@
MAKEINFO = @MAKEINFO@
MANTYPE = @MANTYPE@
+MKDIR_P = @MKDIR_P@
NROFF = @NROFF@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
@@ -130,13 +129,13 @@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -148,6 +147,7 @@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
+builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
@@ -175,10 +175,13 @@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = foreign
-SUBDIRS = src examples doc
+SUBDIRS = src
EXTRA_DIST = patches/README \
patches/00-readline.h.patch \
patches/01-strlcat.c.patch \
@@ -249,7 +252,7 @@
config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
- $(MAKE) stamp-h1; \
+ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@@ -271,7 +274,6 @@
distclean-libtool:
-rm -f libtool
-uninstall-info-am:
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
@@ -304,8 +306,7 @@
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
+$(RECURSIVE_CLEAN_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
@@ -407,24 +408,22 @@
distdir: $(DISTFILES)
$(am__remove_distdir)
- mkdir $(distdir)
- $(mkdir_p) $(distdir)/patches
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
+ test -d $(distdir) || mkdir $(distdir)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
@@ -438,7 +437,7 @@
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
- || $(mkdir_p) "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
@@ -446,6 +445,8 @@
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
distdir) \
|| exit 1; \
fi; \
@@ -453,7 +454,7 @@
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
@@ -528,7 +529,7 @@
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
@@ -598,12 +599,20 @@
install-data-am:
+install-dvi: install-dvi-recursive
+
install-exec-am:
+install-html: install-html-recursive
+
install-info: install-info-recursive
install-man:
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
installcheck-am:
maintainer-clean: maintainer-clean-recursive
@@ -624,24 +633,26 @@
ps-am:
-uninstall-am: uninstall-info-am
+uninstall-am:
-uninstall-info: uninstall-info-recursive
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+ install-strip
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
- check-am clean clean-generic clean-libtool clean-recursive \
- ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
- dist-shar dist-tarZ dist-zip distcheck distclean \
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am am--refresh check check-am clean clean-generic \
+ clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
+ dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \
distclean-generic distclean-hdr distclean-libtool \
- distclean-recursive distclean-tags distcleancheck distdir \
- distuninstallcheck dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
- install-strip installcheck installcheck-am installdirs \
- installdirs-am maintainer-clean maintainer-clean-generic \
- maintainer-clean-recursive mostlyclean mostlyclean-generic \
- mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
- tags tags-recursive uninstall uninstall-am uninstall-info-am
+ distclean-tags distcleancheck distdir distuninstallcheck dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs installdirs-am \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags tags-recursive uninstall uninstall-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/aclocal.m4
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/aclocal.m4 (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/aclocal.m4 Thu Dec 13 12:16:17 2007
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+# generated automatically by aclocal 1.10 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005 Free Software Foundation, Inc.
+# 2005, 2006 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -11,9 +11,14 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
+m4_if(m4_PACKAGE_VERSION, [2.61],,
+[m4_fatal([this file was generated for autoconf 2.61.
+You have another version of autoconf. If you want to use that,
+you should regenerate the build system entirely.], [63])])
+
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL
+# serial 48 AC_PROG_LIBTOOL
# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
@@ -1397,6 +1402,18 @@
dynamic_linker=no
;;
+kfreebsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='GNU ld.so'
+ ;;
+
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
@@ -1552,7 +1569,7 @@
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -1581,7 +1598,7 @@
dynamic_linker='GNU/Linux ld.so'
;;
-netbsdelf*-gnu)
+knetbsd*-gnu)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -1590,7 +1607,7 @@
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
+ dynamic_linker='GNU ld.so'
;;
netbsd*)
@@ -2298,7 +2315,7 @@
lt_cv_deplibs_check_method=pass_all
;;
-freebsd* | dragonfly*)
+freebsd* | kfreebsd*-gnu | dragonfly*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
case $host_cpu in
i*86 )
@@ -2352,11 +2369,11 @@
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux*)
lt_cv_deplibs_check_method=pass_all
;;
-netbsd* | netbsdelf*-gnu)
+netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
else
@@ -3104,7 +3121,7 @@
freebsd-elf*)
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
;;
- freebsd* | dragonfly*)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
# conventions
_LT_AC_TAGVAR(ld_shlibs, $1)=yes
@@ -3263,7 +3280,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
;;
- linux* | k*bsd*-gnu)
+ linux*)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -3365,7 +3382,7 @@
;;
esac
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
@@ -3560,7 +3577,7 @@
# cannot just pass the convience library names through
# without $wl.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
;;
esac
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
@@ -4630,7 +4647,7 @@
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
;;
-linux* | k*bsd*-gnu)
+linux*)
if test "$host_cpu" = ia64; then
symcode='[[ABCDGIRSTW]]'
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
@@ -4903,7 +4920,7 @@
;;
esac
;;
- freebsd* | dragonfly*)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
# FreeBSD uses GNU C++
;;
hpux9* | hpux10* | hpux11*)
@@ -4946,7 +4963,7 @@
;;
esac
;;
- linux* | k*bsd*-gnu)
+ linux*)
case $cc_basename in
KCC*)
# KAI C++ Compiler
@@ -4989,7 +5006,7 @@
;;
esac
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
;;
osf3* | osf4* | osf5*)
case $cc_basename in
@@ -5200,7 +5217,7 @@
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
- linux* | k*bsd*-gnu)
+ linux*)
case $cc_basename in
icc* | ecc*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
@@ -5341,9 +5358,6 @@
cygwin* | mingw*)
_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
;;
- linux* | k*bsd*-gnu)
- _LT_AC_TAGVAR(link_all_deplibs, $1)=no
- ;;
*)
_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
@@ -5514,7 +5528,7 @@
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- linux* | k*bsd*-gnu)
+ linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
tmp_addflag=
case $cc_basename,$host_cpu in
@@ -5540,13 +5554,12 @@
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
fi
- _LT_AC_TAGVAR(link_all_deplibs, $1)=no
else
_LT_AC_TAGVAR(ld_shlibs, $1)=no
fi
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
@@ -5876,7 +5889,7 @@
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_AC_TAGVAR(hardcode_direct, $1)=yes
@@ -5978,7 +5991,7 @@
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
@@ -6083,7 +6096,7 @@
'')
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
*)
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
esac ;;
esac
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
@@ -6380,7 +6393,7 @@
AC_MSG_RESULT([$SED])
])
-# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -6390,14 +6403,29 @@
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.10'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.10], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
- [AM_AUTOMAKE_VERSION([1.9.6])])
+[AM_AUTOMAKE_VERSION([1.10])dnl
+_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
@@ -6454,14 +6482,14 @@
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 7
+# serial 8
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
@@ -6470,8 +6498,10 @@
[AC_PREREQ(2.52)dnl
ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
if $2; then
$1_TRUE=
$1_FALSE='#'
@@ -6485,15 +6515,14 @@
Usually this means the macro was only invoked conditionally.]])
fi])])
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 8
+# serial 9
# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
@@ -6521,6 +6550,7 @@
ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
[$1], CXX, [depcc="$CXX" am_compiler_list=],
[$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], UPC, [depcc="$UPC" am_compiler_list=],
[$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
@@ -6586,6 +6616,7 @@
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -6638,7 +6669,8 @@
AMDEPBACKSLASH='\'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
@@ -6663,8 +6695,9 @@
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
dirpart=`AS_DIRNAME("$mf")`
else
continue
@@ -6711,8 +6744,8 @@
# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -6735,16 +6768,20 @@
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
+[AC_PREREQ([2.60])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
fi
# test whether we have cygpath
@@ -6764,6 +6801,9 @@
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
@@ -6799,6 +6839,10 @@
[_AM_DEPENDENCIES(CXX)],
[define([AC_PROG_CXX],
defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
])
])
@@ -6834,7 +6878,7 @@
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
AC_SUBST(install_sh)])
# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
@@ -6912,14 +6956,14 @@
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 4
+# serial 5
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
@@ -6935,6 +6979,7 @@
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
@@ -6945,7 +6990,7 @@
fi
])
-# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -6953,60 +6998,23 @@
# AM_PROG_MKDIR_P
# ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-#
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake. There are at least two reasons why we must not
-# use `-m 0755':
-# - it causes special bits like SGID to be ignored,
-# - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out. Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
+# Check for `mkdir -p'.
AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # We used to keeping the `.' as first argument, in order to
- # allow $(mkdir_p) to be used without argument. As in
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined. However this is wrong
- # for two reasons:
- # 1. if the package is installed by a user who cannot write `.'
- # make install will fail,
- # 2. the above comment should most certainly read
- # $(mkdir_p) $(DESTDIR)$(somedir)
- # so it does not work when $(somedir) is undefined and
- # $(DESTDIR) is not.
- # To support the latter case, we have to write
- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
- # so the `.' trick is pointless.
- mkdir_p='mkdir -p --'
-else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
- else
- mkdir_p='$(install_sh) -d'
- fi
-fi
-AC_SUBST([mkdir_p])])
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+ [[\\/$]]* | ?:[[\\/]]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
# Helper functions for option handling. -*- Autoconf -*-
@@ -7118,9 +7126,21 @@
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
+# Copyright (C) 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/config.guess
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/config.guess (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/config.guess Thu Dec 13 12:16:17 2007
@@ -1,9 +1,9 @@
#! /bin/sh
# Attempt to guess a canonical system name.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-timestamp='2004-08-13'
+timestamp='2005-12-13'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -17,13 +17,15 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
+
# Originally written by Per Bothner <per at bothner.com>.
# Please send patches to <config-patches at gnu.org>. Submit a context
# diff and a properly formatted ChangeLog entry.
@@ -53,7 +55,7 @@
GNU config.guess ($timestamp)
Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
@@ -66,11 +68,11 @@
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
+ echo "$timestamp" ; exit ;;
--version | -v )
- echo "$version" ; exit 0 ;;
+ echo "$version" ; exit ;;
--help | --h* | -h )
- echo "$usage"; exit 0 ;;
+ echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
@@ -123,7 +125,7 @@
;;
,,*) CC_FOR_BUILD=$CC ;;
,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ;'
+esac ; set_cc_for_build= ;'
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi at noc.rutgers.edu 1994-08-24)
@@ -196,55 +198,20 @@
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
echo "${machine}-${os}${release}"
- exit 0 ;;
- amd64:OpenBSD:*:*)
- echo x86_64-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- amiga:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- cats:OpenBSD:*:*)
- echo arm-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- hp300:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- luna88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mac68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- macppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvmeppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sgi:OpenBSD:*:*)
- echo mips64-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sun3:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:OpenBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ exit ;;
*:ekkoBSD:*:*)
echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
macppc:MirBSD:*:*)
echo powerppc-unknown-mirbsd${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:MirBSD:*:*)
echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
alpha:OSF1:*:*)
case $UNAME_RELEASE in
*4.0)
@@ -297,37 +264,43 @@
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit 0 ;;
+ exit ;;
Alpha\ *:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# Should we change UNAME_MACHINE based on the output of uname instead
# of the specific Alpha model?
echo alpha-pc-interix
- exit 0 ;;
+ exit ;;
21064:Windows_NT:50:3)
echo alpha-dec-winnt3.5
- exit 0 ;;
+ exit ;;
Amiga*:UNIX_System_V:4.0:*)
echo m68k-unknown-sysv4
- exit 0;;
+ exit ;;
*:[Aa]miga[Oo][Ss]:*:*)
echo ${UNAME_MACHINE}-unknown-amigaos
- exit 0 ;;
+ exit ;;
*:[Mm]orph[Oo][Ss]:*:*)
echo ${UNAME_MACHINE}-unknown-morphos
- exit 0 ;;
+ exit ;;
*:OS/390:*:*)
echo i370-ibm-openedition
- exit 0 ;;
+ exit ;;
+ *:z/VM:*:*)
+ echo s390-ibm-zvmoe
+ exit ;;
*:OS400:*:*)
echo powerpc-ibm-os400
- exit 0 ;;
+ exit ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
echo arm-acorn-riscix${UNAME_RELEASE}
- exit 0;;
+ exit ;;
+ arm:riscos:*:*|arm:RISCOS:*:*)
+ echo arm-unknown-riscos
+ exit ;;
SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
echo hppa1.1-hitachi-hiuxmpp
- exit 0;;
+ exit ;;
Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
# akee at wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
if test "`(/bin/universe) 2>/dev/null`" = att ; then
@@ -335,32 +308,32 @@
else
echo pyramid-pyramid-bsd
fi
- exit 0 ;;
+ exit ;;
NILE*:*:*:dcosx)
echo pyramid-pyramid-svr4
- exit 0 ;;
+ exit ;;
DRS?6000:unix:4.0:6*)
echo sparc-icl-nx6
- exit 0 ;;
- DRS?6000:UNIX_SV:4.2*:7*)
+ exit ;;
+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7 && exit 0 ;;
+ sparc) echo sparc-icl-nx7; exit ;;
esac ;;
sun4H:SunOS:5.*:*)
echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
i86pc:SunOS:5.*:*)
echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
sun4*:SunOS:6*:*)
# According to config.sub, this is the proper way to canonicalize
# SunOS6. Hard to guess exactly what SunOS6 will be like, but
# it's likely to be more like Solaris than SunOS4.
echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
sun4*:SunOS:*:*)
case "`/usr/bin/arch -k`" in
Series*|S4*)
@@ -369,10 +342,10 @@
esac
# Japanese Language versions have a version number like `4.1.3-JL'.
echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit 0 ;;
+ exit ;;
sun3*:SunOS:*:*)
echo m68k-sun-sunos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
sun*:*:4.2BSD:*)
UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
@@ -384,10 +357,10 @@
echo sparc-sun-sunos${UNAME_RELEASE}
;;
esac
- exit 0 ;;
+ exit ;;
aushp:SunOS:*:*)
echo sparc-auspex-sunos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
# The situation for MiNT is a little confusing. The machine name
# can be virtually everything (everything which is not
# "atarist" or "atariste" at least should have a processor
@@ -398,40 +371,40 @@
# be no problem.
atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
echo m68k-milan-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
echo m68k-hades-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
echo m68k-unknown-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
m68k:machten:*:*)
echo m68k-apple-machten${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
powerpc:machten:*:*)
echo powerpc-apple-machten${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
RISC*:Mach:*:*)
echo mips-dec-mach_bsd4.3
- exit 0 ;;
+ exit ;;
RISC*:ULTRIX:*:*)
echo mips-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
VAX*:ULTRIX*:*:*)
echo vax-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
2020:CLIX:*:* | 2430:CLIX:*:*)
echo clipper-intergraph-clix${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
mips:*:*:UMIPS | mips:*:*:RISCos)
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
@@ -455,32 +428,33 @@
exit (-1);
}
EOF
- $CC_FOR_BUILD -o $dummy $dummy.c \
- && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
- && exit 0
+ $CC_FOR_BUILD -o $dummy $dummy.c &&
+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`$dummy $dummyarg` &&
+ { echo "$SYSTEM_NAME"; exit; }
echo mips-mips-riscos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
Motorola:PowerMAX_OS:*:*)
echo powerpc-motorola-powermax
- exit 0 ;;
+ exit ;;
Motorola:*:4.3:PL8-*)
echo powerpc-harris-powermax
- exit 0 ;;
+ exit ;;
Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
echo powerpc-harris-powermax
- exit 0 ;;
+ exit ;;
Night_Hawk:Power_UNIX:*:*)
echo powerpc-harris-powerunix
- exit 0 ;;
+ exit ;;
m88k:CX/UX:7*:*)
echo m88k-harris-cxux7
- exit 0 ;;
+ exit ;;
m88k:*:4*:R4*)
echo m88k-motorola-sysv4
- exit 0 ;;
+ exit ;;
m88k:*:3*:R3*)
echo m88k-motorola-sysv3
- exit 0 ;;
+ exit ;;
AViiON:dgux:*:*)
# DG/UX returns AViiON for all architectures
UNAME_PROCESSOR=`/usr/bin/uname -p`
@@ -496,29 +470,29 @@
else
echo i586-dg-dgux${UNAME_RELEASE}
fi
- exit 0 ;;
+ exit ;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
echo m88k-dolphin-sysv3
- exit 0 ;;
+ exit ;;
M88*:*:R3*:*)
# Delta 88k system running SVR3
echo m88k-motorola-sysv3
- exit 0 ;;
+ exit ;;
XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
echo m88k-tektronix-sysv3
- exit 0 ;;
+ exit ;;
Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
echo m68k-tektronix-bsd
- exit 0 ;;
+ exit ;;
*:IRIX*:*:*)
echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit 0 ;;
+ exit ;;
????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
i*86:AIX:*:*)
echo i386-ibm-aix
- exit 0 ;;
+ exit ;;
ia64:AIX:*:*)
if [ -x /usr/bin/oslevel ] ; then
IBM_REV=`/usr/bin/oslevel`
@@ -526,7 +500,7 @@
IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
fi
echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit 0 ;;
+ exit ;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
eval $set_cc_for_build
@@ -541,14 +515,18 @@
exit(0);
}
EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
- echo rs6000-ibm-aix3.2.5
+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ then
+ echo "$SYSTEM_NAME"
+ else
+ echo rs6000-ibm-aix3.2.5
+ fi
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
echo rs6000-ibm-aix3.2.4
else
echo rs6000-ibm-aix3.2
fi
- exit 0 ;;
+ exit ;;
*:AIX:*:[45])
IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
@@ -562,28 +540,28 @@
IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
fi
echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit 0 ;;
+ exit ;;
*:AIX:*:*)
echo rs6000-ibm-aix
- exit 0 ;;
+ exit ;;
ibmrt:4.4BSD:*|romp-ibm:BSD:*)
echo romp-ibm-bsd4.4
- exit 0 ;;
+ exit ;;
ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit 0 ;; # report: romp-ibm BSD 4.3
+ exit ;; # report: romp-ibm BSD 4.3
*:BOSX:*:*)
echo rs6000-bull-bosx
- exit 0 ;;
+ exit ;;
DPX/2?00:B.O.S.:*:*)
echo m68k-bull-sysv3
- exit 0 ;;
+ exit ;;
9000/[34]??:4.3bsd:1.*:*)
echo m68k-hp-bsd
- exit 0 ;;
+ exit ;;
hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
echo m68k-hp-bsd4.4
- exit 0 ;;
+ exit ;;
9000/[34678]??:HP-UX:*:*)
HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
case "${UNAME_MACHINE}" in
@@ -645,9 +623,19 @@
esac
if [ ${HP_ARCH} = "hppa2.0w" ]
then
- # avoid double evaluation of $set_cc_for_build
- test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
+ eval $set_cc_for_build
+
+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
+ # generating 64-bit code. GNU and HP use different nomenclature:
+ #
+ # $ CC_FOR_BUILD=cc ./config.guess
+ # => hppa2.0w-hp-hpux11.23
+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+ # => hppa64-hp-hpux11.23
+
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep __LP64__ >/dev/null
then
HP_ARCH="hppa2.0w"
else
@@ -655,11 +643,11 @@
fi
fi
echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit 0 ;;
+ exit ;;
ia64:HP-UX:*:*)
HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
echo ia64-hp-hpux${HPUX_REV}
- exit 0 ;;
+ exit ;;
3050*:HI-UX:*:*)
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
@@ -687,152 +675,166 @@
exit (0);
}
EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
echo unknown-hitachi-hiuxwe2
- exit 0 ;;
+ exit ;;
9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
echo hppa1.1-hp-bsd
- exit 0 ;;
+ exit ;;
9000/8??:4.3bsd:*:*)
echo hppa1.0-hp-bsd
- exit 0 ;;
+ exit ;;
*9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
echo hppa1.0-hp-mpeix
- exit 0 ;;
+ exit ;;
hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
echo hppa1.1-hp-osf
- exit 0 ;;
+ exit ;;
hp8??:OSF1:*:*)
echo hppa1.0-hp-osf
- exit 0 ;;
+ exit ;;
i*86:OSF1:*:*)
if [ -x /usr/sbin/sysversion ] ; then
echo ${UNAME_MACHINE}-unknown-osf1mk
else
echo ${UNAME_MACHINE}-unknown-osf1
fi
- exit 0 ;;
+ exit ;;
parisc*:Lites*:*:*)
echo hppa1.1-hp-lites
- exit 0 ;;
+ exit ;;
C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
echo c1-convex-bsd
- exit 0 ;;
+ exit ;;
C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
- exit 0 ;;
+ exit ;;
C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
echo c34-convex-bsd
- exit 0 ;;
+ exit ;;
C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
echo c38-convex-bsd
- exit 0 ;;
+ exit ;;
C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
echo c4-convex-bsd
- exit 0 ;;
+ exit ;;
CRAY*Y-MP:*:*:*)
echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
CRAY*[A-Z]90:*:*:*)
echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
CRAY*TS:*:*:*)
echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
CRAY*T3E:*:*:*)
echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
CRAY*SV1:*:*:*)
echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
*:UNICOS/mp:*:*)
echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
+ exit ;;
5000:UNIX_System_V:4.*:*)
FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
+ exit ;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
sparc*:BSD/OS:*:*)
echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:BSD/OS:*:*)
echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:FreeBSD:*:*)
echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit 0 ;;
+ exit ;;
i*:CYGWIN*:*)
echo ${UNAME_MACHINE}-pc-cygwin
- exit 0 ;;
+ exit ;;
i*:MINGW*:*)
echo ${UNAME_MACHINE}-pc-mingw32
- exit 0 ;;
+ exit ;;
+ i*:windows32*:*)
+ # uname -m includes "-pc" on this system.
+ echo ${UNAME_MACHINE}-mingw32
+ exit ;;
i*:PW*:*)
echo ${UNAME_MACHINE}-pc-pw32
- exit 0 ;;
- x86:Interix*:[34]*)
+ exit ;;
+ x86:Interix*:[345]*)
echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
- exit 0 ;;
+ exit ;;
[345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
echo i${UNAME_MACHINE}-pc-mks
- exit 0 ;;
+ exit ;;
i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
# UNAME_MACHINE based on the output of uname instead of i386?
echo i586-pc-interix
- exit 0 ;;
+ exit ;;
i*:UWIN*:*)
echo ${UNAME_MACHINE}-pc-uwin
- exit 0 ;;
+ exit ;;
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+ echo x86_64-unknown-cygwin
+ exit ;;
p*:CYGWIN*:*)
echo powerpcle-unknown-cygwin
- exit 0 ;;
+ exit ;;
prep*:SunOS:5.*:*)
echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
*:GNU:*:*)
# the GNU system
echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit 0 ;;
+ exit ;;
*:GNU/*:*:*)
# other systems with GNU libc and userland
echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
- exit 0 ;;
+ exit ;;
i*86:Minix:*:*)
echo ${UNAME_MACHINE}-pc-minix
- exit 0 ;;
+ exit ;;
arm*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
cris:Linux:*:*)
echo cris-axis-linux-gnu
- exit 0 ;;
+ exit ;;
+ crisv32:Linux:*:*)
+ echo crisv32-axis-linux-gnu
+ exit ;;
+ frv:Linux:*:*)
+ echo frv-unknown-linux-gnu
+ exit ;;
ia64:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
m32r*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
m68*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
mips:Linux:*:*)
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
@@ -849,8 +851,8 @@
#endif
#endif
EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '/^CPU/{s: ::g;p;}'`"
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
;;
mips64:Linux:*:*)
eval $set_cc_for_build
@@ -868,15 +870,18 @@
#endif
#endif
EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '/^CPU/{s: ::g;p;}'`"
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
;;
+ or32:Linux:*:*)
+ echo or32-unknown-linux-gnu
+ exit ;;
ppc:Linux:*:*)
echo powerpc-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
ppc64:Linux:*:*)
echo powerpc64-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
alpha:Linux:*:*)
case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
EV5) UNAME_MACHINE=alphaev5 ;;
@@ -890,7 +895,7 @@
objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit 0 ;;
+ exit ;;
parisc:Linux:*:* | hppa:Linux:*:*)
# Look for CPU level
case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
@@ -898,25 +903,28 @@
PA8*) echo hppa2.0-unknown-linux-gnu ;;
*) echo hppa-unknown-linux-gnu ;;
esac
- exit 0 ;;
+ exit ;;
parisc64:Linux:*:* | hppa64:Linux:*:*)
echo hppa64-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
s390:Linux:*:* | s390x:Linux:*:*)
echo ${UNAME_MACHINE}-ibm-linux
- exit 0 ;;
+ exit ;;
sh64*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
sh*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
sparc:Linux:*:* | sparc64:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
+ vax:Linux:*:*)
+ echo ${UNAME_MACHINE}-dec-linux-gnu
+ exit ;;
x86_64:Linux:*:*)
echo x86_64-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
i*86:Linux:*:*)
# The BFD linker knows what the default object file format is, so
# first see if it will tell us. cd to the root directory to prevent
@@ -934,15 +942,15 @@
;;
a.out-i386-linux)
echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit 0 ;;
+ exit ;;
coff-i386)
echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit 0 ;;
+ exit ;;
"")
# Either a pre-BFD a.out linker (linux-gnuoldld) or
# one that does not give us useful --help.
echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
- exit 0 ;;
+ exit ;;
esac
# Determine whether the default compiler is a.out or elf
eval $set_cc_for_build
@@ -959,7 +967,7 @@
LIBC=gnulibc1
# endif
#else
- #ifdef __INTEL_COMPILER
+ #if defined(__INTEL_COMPILER) || defined(__PGI)
LIBC=gnu
#else
LIBC=gnuaout
@@ -969,16 +977,19 @@
LIBC=dietlibc
#endif
EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
- test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '/^LIBC/{s: ::g;p;}'`"
+ test x"${LIBC}" != x && {
+ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+ exit
+ }
+ test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
;;
i*86:DYNIX/ptx:4*:*)
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
# earlier versions are messed up and put the nodename in both
# sysname and nodename.
echo i386-sequent-sysv4
- exit 0 ;;
+ exit ;;
i*86:UNIX_SV:4.2MP:2.*)
# Unixware is an offshoot of SVR4, but it has its own version
# number series starting with 2...
@@ -986,27 +997,27 @@
# I just have to hope. -- rms.
# Use sysv4.2uw... so that sysv4* matches it.
echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit 0 ;;
+ exit ;;
i*86:OS/2:*:*)
# If we were able to find `uname', then EMX Unix compatibility
# is probably installed.
echo ${UNAME_MACHINE}-pc-os2-emx
- exit 0 ;;
+ exit ;;
i*86:XTS-300:*:STOP)
echo ${UNAME_MACHINE}-unknown-stop
- exit 0 ;;
+ exit ;;
i*86:atheos:*:*)
echo ${UNAME_MACHINE}-unknown-atheos
- exit 0 ;;
- i*86:syllable:*:*)
+ exit ;;
+ i*86:syllable:*:*)
echo ${UNAME_MACHINE}-pc-syllable
- exit 0 ;;
+ exit ;;
i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
echo i386-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
i*86:*DOS:*:*)
echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit 0 ;;
+ exit ;;
i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
@@ -1014,15 +1025,16 @@
else
echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
fi
- exit 0 ;;
- i*86:*:5:[78]*)
+ exit ;;
+ i*86:*:5:[678]*)
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
case `/bin/uname -X | grep "^Machine"` in
*486*) UNAME_MACHINE=i486 ;;
*Pentium) UNAME_MACHINE=i586 ;;
*Pent*|*Celeron) UNAME_MACHINE=i686 ;;
esac
echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit 0 ;;
+ exit ;;
i*86:*:3.2:*)
if test -f /usr/options/cb.name; then
UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
@@ -1040,73 +1052,73 @@
else
echo ${UNAME_MACHINE}-pc-sysv32
fi
- exit 0 ;;
+ exit ;;
pc:*:*:*)
# Left here for compatibility:
# uname -m prints for DJGPP always 'pc', but it prints nothing about
# the processor, so we play safe by assuming i386.
echo i386-pc-msdosdjgpp
- exit 0 ;;
+ exit ;;
Intel:Mach:3*:*)
echo i386-pc-mach3
- exit 0 ;;
+ exit ;;
paragon:*:*:*)
echo i860-intel-osf1
- exit 0 ;;
+ exit ;;
i860:*:4.*:*) # i860-SVR4
if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
else # Add other i860-SVR4 vendors below as they are discovered.
echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
fi
- exit 0 ;;
+ exit ;;
mini*:CTIX:SYS*5:*)
# "miniframe"
echo m68010-convergent-sysv
- exit 0 ;;
+ exit ;;
mc68k:UNIX:SYSTEM5:3.51m)
echo m68k-convergent-sysv
- exit 0 ;;
+ exit ;;
M680?0:D-NIX:5.3:*)
echo m68k-diab-dnix
- exit 0 ;;
+ exit ;;
M68*:*:R3V[5678]*:*)
- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4 && exit 0 ;;
+ && { echo i486-ncr-sysv4; exit; } ;;
m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
mc68030:UNIX_System_V:4.*:*)
echo m68k-atari-sysv4
- exit 0 ;;
+ exit ;;
TSUNAMI:LynxOS:2.*:*)
echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
rs6000:LynxOS:2.*:*)
echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
SM[BE]S:UNIX_SV:*:*)
echo mips-dde-sysv${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
RM*:ReliantUNIX-*:*:*)
echo mips-sni-sysv4
- exit 0 ;;
+ exit ;;
RM*:SINIX-*:*:*)
echo mips-sni-sysv4
- exit 0 ;;
+ exit ;;
*:SINIX-*:*:*)
if uname -p 2>/dev/null >/dev/null ; then
UNAME_MACHINE=`(uname -p) 2>/dev/null`
@@ -1114,69 +1126,72 @@
else
echo ns32k-sni-sysv
fi
- exit 0 ;;
+ exit ;;
PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
# says <Richard.M.Bartel at ccMail.Census.GOV>
echo i586-unisys-sysv4
- exit 0 ;;
+ exit ;;
*:UNIX_System_V:4*:FTX*)
# From Gerald Hewes <hewes at openmarket.com>.
# How about differentiating between stratus architectures? -djm
echo hppa1.1-stratus-sysv4
- exit 0 ;;
+ exit ;;
*:*:*:FTX*)
# From seanf at swdc.stratus.com.
echo i860-stratus-sysv4
- exit 0 ;;
+ exit ;;
+ i*86:VOS:*:*)
+ # From Paul.Green at stratus.com.
+ echo ${UNAME_MACHINE}-stratus-vos
+ exit ;;
*:VOS:*:*)
# From Paul.Green at stratus.com.
echo hppa1.1-stratus-vos
- exit 0 ;;
+ exit ;;
mc68*:A/UX:*:*)
echo m68k-apple-aux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
news*:NEWS-OS:6*:*)
echo mips-sony-newsos6
- exit 0 ;;
+ exit ;;
R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
if [ -d /usr/nec ]; then
echo mips-nec-sysv${UNAME_RELEASE}
else
echo mips-unknown-sysv${UNAME_RELEASE}
fi
- exit 0 ;;
+ exit ;;
BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
echo powerpc-be-beos
- exit 0 ;;
+ exit ;;
BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
echo powerpc-apple-beos
- exit 0 ;;
+ exit ;;
BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
echo i586-pc-beos
- exit 0 ;;
+ exit ;;
SX-4:SUPER-UX:*:*)
echo sx4-nec-superux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
SX-5:SUPER-UX:*:*)
echo sx5-nec-superux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
SX-6:SUPER-UX:*:*)
echo sx6-nec-superux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
Power*:Rhapsody:*:*)
echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:Rhapsody:*:*)
echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:Darwin:*:*)
UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
case $UNAME_PROCESSOR in
- *86) UNAME_PROCESSOR=i686 ;;
unknown) UNAME_PROCESSOR=powerpc ;;
esac
echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:procnto*:*:* | *:QNX:[0123456789]*:*)
UNAME_PROCESSOR=`uname -p`
if test "$UNAME_PROCESSOR" = "x86"; then
@@ -1184,22 +1199,25 @@
UNAME_MACHINE=pc
fi
echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:QNX:*:4*)
echo i386-pc-qnx
- exit 0 ;;
+ exit ;;
+ NSE-?:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk${UNAME_RELEASE}
+ exit ;;
NSR-?:NONSTOP_KERNEL:*:*)
echo nsr-tandem-nsk${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:NonStop-UX:*:*)
echo mips-compaq-nonstopux
- exit 0 ;;
+ exit ;;
BS2000:POSIX*:*:*)
echo bs2000-siemens-sysv
- exit 0 ;;
+ exit ;;
DS/*:UNIX_System_V:*:*)
echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:Plan9:*:*)
# "uname -m" is not consistent, so use $cputype instead. 386
# is converted to i386 for consistency with other x86
@@ -1210,38 +1228,47 @@
UNAME_MACHINE="$cputype"
fi
echo ${UNAME_MACHINE}-unknown-plan9
- exit 0 ;;
+ exit ;;
*:TOPS-10:*:*)
echo pdp10-unknown-tops10
- exit 0 ;;
+ exit ;;
*:TENEX:*:*)
echo pdp10-unknown-tenex
- exit 0 ;;
+ exit ;;
KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
echo pdp10-dec-tops20
- exit 0 ;;
+ exit ;;
XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
echo pdp10-xkl-tops20
- exit 0 ;;
+ exit ;;
*:TOPS-20:*:*)
echo pdp10-unknown-tops20
- exit 0 ;;
+ exit ;;
*:ITS:*:*)
echo pdp10-unknown-its
- exit 0 ;;
+ exit ;;
SEI:*:*:SEIUX)
echo mips-sei-seiux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:DragonFly:*:*)
echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit 0 ;;
+ exit ;;
*:*VMS:*:*)
UNAME_MACHINE=`(uname -p) 2>/dev/null`
case "${UNAME_MACHINE}" in
- A*) echo alpha-dec-vms && exit 0 ;;
- I*) echo ia64-dec-vms && exit 0 ;;
- V*) echo vax-dec-vms && exit 0 ;;
- esac
+ A*) echo alpha-dec-vms ; exit ;;
+ I*) echo ia64-dec-vms ; exit ;;
+ V*) echo vax-dec-vms ; exit ;;
+ esac ;;
+ *:XENIX:*:SysV)
+ echo i386-pc-xenix
+ exit ;;
+ i*86:skyos:*:*)
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ exit ;;
+ i*86:rdos:*:*)
+ echo ${UNAME_MACHINE}-pc-rdos
+ exit ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
@@ -1273,7 +1300,7 @@
#endif
#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix"); exit (0);
+ printf ("arm-acorn-riscix\n"); exit (0);
#endif
#if defined (hp300) && !defined (hpux)
@@ -1362,11 +1389,12 @@
}
EOF
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
# Apollos put the system type in the environment.
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
# Convex versions that predate uname can use getsysinfo(1)
@@ -1375,22 +1403,22 @@
case `getsysinfo -f cpu_type` in
c1*)
echo c1-convex-bsd
- exit 0 ;;
+ exit ;;
c2*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
- exit 0 ;;
+ exit ;;
c34*)
echo c34-convex-bsd
- exit 0 ;;
+ exit ;;
c38*)
echo c38-convex-bsd
- exit 0 ;;
+ exit ;;
c4*)
echo c4-convex-bsd
- exit 0 ;;
+ exit ;;
esac
fi
@@ -1401,7 +1429,9 @@
the operating system you are using. It is advised that you
download the most up to date version of the config scripts from
- ftp://ftp.gnu.org/pub/gnu/config/
+ http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+and
+ http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
If the version you run ($0) is already up to date, please
send the following data and any information you think might be
Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/config.sub
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/config.sub (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/config.sub Thu Dec 13 12:16:17 2007
@@ -1,9 +1,9 @@
#! /bin/sh
# Configuration validation subroutine script.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-timestamp='2004-06-24'
+timestamp='2005-12-11'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
@@ -21,14 +21,15 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
+
# Please send patches to <config-patches at gnu.org>. Submit a context
# diff and a properly formatted ChangeLog entry.
#
@@ -70,7 +71,7 @@
version="\
GNU config.sub ($timestamp)
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
@@ -83,11 +84,11 @@
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
+ echo "$timestamp" ; exit ;;
--version | -v )
- echo "$version" ; exit 0 ;;
+ echo "$version" ; exit ;;
--help | --h* | -h )
- echo "$usage"; exit 0 ;;
+ echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
@@ -99,7 +100,7 @@
*local*)
# First pass through any local machine types.
echo $1
- exit 0;;
+ exit ;;
* )
break ;;
@@ -118,8 +119,9 @@
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
- nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
- kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+ nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
+ uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
@@ -170,6 +172,10 @@
-hiux*)
os=-hiuxwe2
;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
-sco5)
os=-sco3.2v5
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -186,6 +192,10 @@
# Don't forget version if it is 3.2v4 or newer.
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
+ -sco5v6*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
-sco*)
os=-sco3.2v2
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -231,13 +241,14 @@
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
| am33_2.0 \
| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+ | bfin \
| c4x | clipper \
| d10v | d30v | dlx | dsp16xx \
| fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| i370 | i860 | i960 | ia64 \
| ip2k | iq2000 \
- | m32r | m32rle | m68000 | m68k | m88k | mcore \
+ | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
@@ -246,6 +257,7 @@
| mips64vr4100 | mips64vr4100el \
| mips64vr4300 | mips64vr4300el \
| mips64vr5000 | mips64vr5000el \
+ | mips64vr5900 | mips64vr5900el \
| mipsisa32 | mipsisa32el \
| mipsisa32r2 | mipsisa32r2el \
| mipsisa64 | mipsisa64el \
@@ -254,23 +266,28 @@
| mipsisa64sr71k | mipsisa64sr71kel \
| mipstx39 | mipstx39el \
| mn10200 | mn10300 \
+ | mt \
| msp430 \
| ns16k | ns32k \
- | openrisc | or32 \
+ | or32 \
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
| pyramid \
- | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+ | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
- | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv8 | sparcv9 | sparcv9b \
+ | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b \
| strongarm \
| tahoe | thumb | tic4x | tic80 | tron \
| v850 | v850e \
| we32k \
- | x86 | xscale | xstormy16 | xtensa \
+ | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
| z8k)
basic_machine=$basic_machine-unknown
;;
+ m32c)
+ basic_machine=$basic_machine-unknown
+ ;;
m6811 | m68hc11 | m6812 | m68hc12)
# Motorola 68HC11/12.
basic_machine=$basic_machine-unknown
@@ -278,6 +295,9 @@
;;
m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
;;
+ ms1)
+ basic_machine=mt-unknown
+ ;;
# We use `pc' rather than `unknown'
# because (1) that's what they normally are, and
@@ -298,7 +318,7 @@
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* \
- | bs2000-* \
+ | bfin-* | bs2000-* \
| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
| clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
@@ -310,7 +330,7 @@
| ip2k-* | iq2000-* \
| m32r-* | m32rle-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | mcore-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* \
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
| mips16-* \
| mips64-* | mips64el-* \
@@ -319,6 +339,7 @@
| mips64vr4100-* | mips64vr4100el-* \
| mips64vr4300-* | mips64vr4300el-* \
| mips64vr5000-* | mips64vr5000el-* \
+ | mips64vr5900-* | mips64vr5900el-* \
| mipsisa32-* | mipsisa32el-* \
| mipsisa32r2-* | mipsisa32r2el-* \
| mipsisa64-* | mipsisa64el-* \
@@ -327,6 +348,7 @@
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
| mipstx39-* | mipstx39el-* \
| mmix-* \
+ | mt-* \
| msp430-* \
| none-* | np1-* | ns16k-* | ns32k-* \
| orion-* \
@@ -334,20 +356,23 @@
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
| pyramid-* \
| romp-* | rs6000-* \
- | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
- | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
+ | sparclite-* \
| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
| tahoe-* | thumb-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
| tron-* \
| v850-* | v850e-* | vax-* \
| we32k-* \
- | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
- | xtensa-* \
+ | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
+ | xstormy16-* | xtensa-* \
| ymp-* \
| z8k-*)
;;
+ m32c-*)
+ ;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
386bsd)
@@ -457,6 +482,9 @@
crds | unos)
basic_machine=m68k-crds
;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
cris | cris-* | etrax*)
basic_machine=cris-axis
;;
@@ -486,6 +514,10 @@
basic_machine=m88k-motorola
os=-sysv3
;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
dpx20 | dpx20-*)
basic_machine=rs6000-bull
os=-bosx
@@ -676,6 +708,9 @@
basic_machine=i386-pc
os=-msdos
;;
+ ms1-*)
+ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ ;;
mvs)
basic_machine=i370-ibm
os=-mvs
@@ -751,9 +786,8 @@
basic_machine=hppa1.1-oki
os=-proelf
;;
- or32 | or32-*)
+ openrisc | openrisc-*)
basic_machine=or32-unknown
- os=-coff
;;
os400)
basic_machine=powerpc-ibm
@@ -840,6 +874,10 @@
basic_machine=i586-unknown
os=-pw32
;;
+ rdos)
+ basic_machine=i386-pc
+ os=-rdos
+ ;;
rom68k)
basic_machine=m68k-rom68k
os=-coff
@@ -1026,6 +1064,10 @@
basic_machine=hppa1.1-winbond
os=-proelf
;;
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
xps | xps100)
basic_machine=xps100-honeywell
;;
@@ -1075,12 +1117,9 @@
we32k)
basic_machine=we32k-att
;;
- sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
+ sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
basic_machine=sh-unknown
;;
- sh64)
- basic_machine=sh64-unknown
- ;;
sparc | sparcv8 | sparcv9 | sparcv9b)
basic_machine=sparc-sun
;;
@@ -1161,13 +1200,15 @@
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
| -chorusos* | -chorusrdb* \
| -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* \
| -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
- | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+ | -skyos* | -haiku* | -rdos*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
@@ -1185,7 +1226,7 @@
os=`echo $os | sed -e 's|nto|nto-qnx|'`
;;
-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
| -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
;;
-mac*)
@@ -1294,6 +1335,9 @@
-kaos*)
os=-kaos
;;
+ -zvmoe)
+ os=-zvmoe
+ ;;
-none)
;;
*)
@@ -1371,6 +1415,9 @@
*-be)
os=-beos
;;
+ *-haiku)
+ os=-haiku
+ ;;
*-ibm)
os=-aix
;;
@@ -1542,7 +1589,7 @@
esac
echo $basic_machine$os
-exit 0
+exit
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/configure
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/configure (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/configure Thu Dec 13 12:16:17 2007
@@ -725,7 +725,7 @@
# Identity of this package.
PACKAGE_NAME='libedit'
-PACKAGE_TARNAME='libedit-20070302'
+PACKAGE_TARNAME='libedit-20071213'
PACKAGE_VERSION='2.10'
PACKAGE_STRING='libedit 2.10'
PACKAGE_BUGREPORT=''
@@ -807,6 +807,7 @@
INSTALL_PROGRAM
INSTALL_SCRIPT
INSTALL_DATA
+am__isrc
CYGPATH_W
PACKAGE
VERSION
@@ -1439,7 +1440,7 @@
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/libedit-20070302]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/libedit-20071213]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
@@ -1933,7 +1934,8 @@
ac_config_headers="$ac_config_headers config.h"
-am__api_version="1.9"
+am__api_version='1.10'
+
ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
if test -f "$ac_dir/install-sh"; then
@@ -2116,38 +2118,53 @@
echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
fi
-if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # We used to keeping the `.' as first argument, in order to
- # allow $(mkdir_p) to be used without argument. As in
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined. However this is wrong
- # for two reasons:
- # 1. if the package is installed by a user who cannot write `.'
- # make install will fail,
- # 2. the above comment should most certainly read
- # $(mkdir_p) $(DESTDIR)$(somedir)
- # so it does not work when $(somedir) is undefined and
- # $(DESTDIR) is not.
- # To support the latter case, we have to write
- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
- # so the `.' trick is pointless.
- mkdir_p='mkdir -p --'
-else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
+{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
+if test -z "$MKDIR_P"; then
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+done
+IFS=$as_save_IFS
+
+fi
+
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
else
- mkdir_p='$(install_sh) -d'
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ test -d ./--version && rmdir ./--version
+ MKDIR_P="$ac_install_sh -d"
fi
fi
+{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+echo "${ECHO_T}$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+ [\\/$]* | ?:[\\/]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
for ac_prog in gawk mawk nawk awk
do
@@ -2230,12 +2247,16 @@
fi
rmdir .tst 2>/dev/null
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
{ (exit 1); exit 1; }; }
+ fi
fi
# test whether we have cygpath
@@ -2249,7 +2270,7 @@
# Define the identity of the package.
- PACKAGE='libedit-20070302'
+ PACKAGE='libedit-20071213'
VERSION='2.10'
@@ -2278,7 +2299,7 @@
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
# Installed binaries are usually stripped using `strip' when the user
# run `make install-strip'. However `strip' might not be the right
@@ -2382,7 +2403,7 @@
fi
fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
@@ -2604,9 +2625,7 @@
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
fi
-
-
-if test "x$enable_dependency_tracking" != xno; then
+ if test "x$enable_dependency_tracking" != xno; then
AMDEP_TRUE=
AMDEP_FALSE='#'
else
@@ -2615,7 +2634,6 @@
fi
-
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -3602,6 +3620,7 @@
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -3631,9 +3650,7 @@
echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-if
+ if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
am__fastdepCC_TRUE=
@@ -4110,7 +4127,7 @@
lt_cv_deplibs_check_method=pass_all
;;
-freebsd* | dragonfly*)
+freebsd* | kfreebsd*-gnu | dragonfly*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
case $host_cpu in
i*86 )
@@ -4164,11 +4181,11 @@
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux*)
lt_cv_deplibs_check_method=pass_all
;;
-netbsd* | netbsdelf*-gnu)
+netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
else
@@ -4285,7 +4302,7 @@
;;
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 4288 "configure"' > conftest.$ac_ext
+ echo '#line 4305 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
@@ -5509,6 +5526,7 @@
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -5538,9 +5556,7 @@
echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
-
-
-if
+ if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
am__fastdepCXX_TRUE=
@@ -6206,7 +6222,7 @@
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
;;
-linux* | k*bsd*-gnu)
+linux*)
if test "$host_cpu" = ia64; then
symcode='[ABCDGIRSTW]'
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
@@ -7012,11 +7028,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7015: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:7031: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:7019: \$? = $ac_status" >&5
+ echo "$as_me:7035: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -7174,7 +7190,7 @@
lt_prog_compiler_static='-Bstatic'
;;
- linux* | k*bsd*-gnu)
+ linux*)
case $cc_basename in
icc* | ecc*)
lt_prog_compiler_wl='-Wl,'
@@ -7280,11 +7296,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7283: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:7299: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:7287: \$? = $ac_status" >&5
+ echo "$as_me:7303: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -7384,11 +7400,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7387: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:7403: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:7391: \$? = $ac_status" >&5
+ echo "$as_me:7407: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -7613,7 +7629,7 @@
archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- linux* | k*bsd*-gnu)
+ linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
tmp_addflag=
case $cc_basename,$host_cpu in
@@ -7639,13 +7655,12 @@
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
fi
- link_all_deplibs=no
else
ld_shlibs=no
fi
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
@@ -8073,7 +8088,7 @@
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
@@ -8175,7 +8190,7 @@
link_all_deplibs=yes
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
@@ -8280,7 +8295,7 @@
'')
whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
*)
- whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
esac ;;
esac
link_all_deplibs=yes
@@ -8665,6 +8680,18 @@
dynamic_linker=no
;;
+kfreebsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='GNU ld.so'
+ ;;
+
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
@@ -8820,7 +8847,7 @@
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -8849,7 +8876,7 @@
dynamic_linker='GNU/Linux ld.so'
;;
-netbsdelf*-gnu)
+knetbsd*-gnu)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -8858,7 +8885,7 @@
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
+ dynamic_linker='GNU ld.so'
;;
netbsd*)
@@ -9681,7 +9708,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 9684 "configure"
+#line 9711 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -9781,7 +9808,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 9784 "configure"
+#line 9811 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -11094,7 +11121,7 @@
freebsd-elf*)
archive_cmds_need_lc_CXX=no
;;
- freebsd* | dragonfly*)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
# conventions
ld_shlibs_CXX=yes
@@ -11253,7 +11280,7 @@
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_CXX=:
;;
- linux* | k*bsd*-gnu)
+ linux*)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -11355,7 +11382,7 @@
;;
esac
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
@@ -11550,7 +11577,7 @@
# cannot just pass the convience library names through
# without $wl.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
+ whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
;;
esac
link_all_deplibs_CXX=yes
@@ -11922,7 +11949,7 @@
;;
esac
;;
- freebsd* | dragonfly*)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
# FreeBSD uses GNU C++
;;
hpux9* | hpux10* | hpux11*)
@@ -11965,7 +11992,7 @@
;;
esac
;;
- linux* | k*bsd*-gnu)
+ linux*)
case $cc_basename in
KCC*)
# KAI C++ Compiler
@@ -12008,7 +12035,7 @@
;;
esac
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
;;
osf3* | osf4* | osf5*)
case $cc_basename in
@@ -12117,11 +12144,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:12120: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:12147: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:12124: \$? = $ac_status" >&5
+ echo "$as_me:12151: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -12221,11 +12248,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:12224: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:12251: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:12228: \$? = $ac_status" >&5
+ echo "$as_me:12255: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -12293,9 +12320,6 @@
cygwin* | mingw*)
export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
;;
- linux* | k*bsd*-gnu)
- link_all_deplibs_CXX=no
- ;;
*)
export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
@@ -12575,6 +12599,18 @@
dynamic_linker=no
;;
+kfreebsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='GNU ld.so'
+ ;;
+
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
@@ -12730,7 +12766,7 @@
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -12759,7 +12795,7 @@
dynamic_linker='GNU/Linux ld.so'
;;
-netbsdelf*-gnu)
+knetbsd*-gnu)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -12768,7 +12804,7 @@
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
+ dynamic_linker='GNU ld.so'
;;
netbsd*)
@@ -13676,7 +13712,7 @@
lt_prog_compiler_static_F77='-Bstatic'
;;
- linux* | k*bsd*-gnu)
+ linux*)
case $cc_basename in
icc* | ecc*)
lt_prog_compiler_wl_F77='-Wl,'
@@ -13782,11 +13818,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:13785: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:13821: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:13789: \$? = $ac_status" >&5
+ echo "$as_me:13825: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -13886,11 +13922,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:13889: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:13925: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:13893: \$? = $ac_status" >&5
+ echo "$as_me:13929: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -14115,7 +14151,7 @@
archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- linux* | k*bsd*-gnu)
+ linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
tmp_addflag=
case $cc_basename,$host_cpu in
@@ -14141,13 +14177,12 @@
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
fi
- link_all_deplibs_F77=no
else
ld_shlibs_F77=no
fi
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
@@ -14555,7 +14590,7 @@
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec_F77='-R$libdir'
hardcode_direct_F77=yes
@@ -14657,7 +14692,7 @@
link_all_deplibs_F77=yes
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
@@ -14762,7 +14797,7 @@
'')
whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;;
*)
- whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
esac ;;
esac
link_all_deplibs_F77=yes
@@ -15147,6 +15182,18 @@
dynamic_linker=no
;;
+kfreebsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='GNU ld.so'
+ ;;
+
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
@@ -15302,7 +15349,7 @@
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -15331,7 +15378,7 @@
dynamic_linker='GNU/Linux ld.so'
;;
-netbsdelf*-gnu)
+knetbsd*-gnu)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -15340,7 +15387,7 @@
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
+ dynamic_linker='GNU ld.so'
;;
netbsd*)
@@ -16073,11 +16120,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16076: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16123: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:16080: \$? = $ac_status" >&5
+ echo "$as_me:16127: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -16235,7 +16282,7 @@
lt_prog_compiler_static_GCJ='-Bstatic'
;;
- linux* | k*bsd*-gnu)
+ linux*)
case $cc_basename in
icc* | ecc*)
lt_prog_compiler_wl_GCJ='-Wl,'
@@ -16341,11 +16388,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16344: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16391: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:16348: \$? = $ac_status" >&5
+ echo "$as_me:16395: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -16445,11 +16492,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16448: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16495: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:16452: \$? = $ac_status" >&5
+ echo "$as_me:16499: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -16674,7 +16721,7 @@
archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- linux* | k*bsd*-gnu)
+ linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
tmp_addflag=
case $cc_basename,$host_cpu in
@@ -16700,13 +16747,12 @@
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
fi
- link_all_deplibs_GCJ=no
else
ld_shlibs_GCJ=no
fi
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
@@ -17134,7 +17180,7 @@
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec_GCJ='-R$libdir'
hardcode_direct_GCJ=yes
@@ -17236,7 +17282,7 @@
link_all_deplibs_GCJ=yes
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
@@ -17341,7 +17387,7 @@
'')
whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;;
*)
- whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
esac ;;
esac
link_all_deplibs_GCJ=yes
@@ -17726,6 +17772,18 @@
dynamic_linker=no
;;
+kfreebsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='GNU ld.so'
+ ;;
+
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
@@ -17881,7 +17939,7 @@
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -17910,7 +17968,7 @@
dynamic_linker='GNU/Linux ld.so'
;;
-netbsdelf*-gnu)
+knetbsd*-gnu)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -17919,7 +17977,7 @@
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
+ dynamic_linker='GNU ld.so'
;;
netbsd*)
@@ -19542,6 +19600,7 @@
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -19571,9 +19630,7 @@
echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
-
-
-if
+ if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
am__fastdepCXX_TRUE=
@@ -20327,6 +20384,7 @@
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -20356,9 +20414,7 @@
echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-if
+ if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
am__fastdepCC_TRUE=
@@ -23676,6 +23732,7 @@
ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
@@ -23886,6 +23943,7 @@
INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
INSTALL_DATA!$INSTALL_DATA$ac_delim
+am__isrc!$am__isrc$ac_delim
CYGPATH_W!$CYGPATH_W$ac_delim
PACKAGE!$PACKAGE$ac_delim
VERSION!$VERSION$ac_delim
@@ -23942,7 +24000,6 @@
am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim
am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim
CXXCPP!$CXXCPP$ac_delim
-F77!$F77$ac_delim
_ACEOF
if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
@@ -23984,6 +24041,7 @@
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
cat >conf$$subs.sed <<_ACEOF
+F77!$F77$ac_delim
FFLAGS!$FFLAGS$ac_delim
ac_ct_F77!$ac_ct_F77$ac_delim
LIBTOOL!$LIBTOOL$ac_delim
@@ -23995,7 +24053,7 @@
LTLIBOBJS!$LTLIBOBJS$ac_delim
_ACEOF
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 9; then
+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 10; then
break
elif $ac_last_try; then
{ { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
@@ -24222,6 +24280,11 @@
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
*) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
@@ -24275,6 +24338,7 @@
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
@@ -24439,8 +24503,9 @@
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
dirpart=`$as_dirname -- "$mf" ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$mf" : 'X\(//\)[^/]' \| \
Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/doc/Makefile.in
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/doc/Makefile.in (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/doc/Makefile.in Thu Dec 13 12:16:17 2007
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -13,15 +13,11 @@
# PARTICULAR PURPOSE.
@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
@@ -54,8 +50,6 @@
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
@@ -83,6 +77,7 @@
F77 = @F77@
FFLAGS = @FFLAGS@
GREP = @GREP@
+INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -96,6 +91,7 @@
LT_VERSION = @LT_VERSION@
MAKEINFO = @MAKEINFO@
MANTYPE = @MANTYPE@
+MKDIR_P = @MKDIR_P@
NROFF = @NROFF@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
@@ -110,13 +106,13 @@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -128,6 +124,7 @@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
+builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
@@ -155,8 +152,11 @@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
EL_MANS = editline.3 editrc.5
man_MANS = $(EL_MANS)
EL_MAN_LINKS = el_init.3 el_end.3 el_reset.3 el_gets.3 el_getc.3 \
@@ -205,13 +205,9 @@
clean-libtool:
-rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
install-man3: $(man3_MANS) $(man_MANS)
@$(NORMAL_INSTALL)
- test -z "$(man3dir)" || $(mkdir_p) "$(DESTDIR)$(man3dir)"
+ test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)"
@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
for i in $$l2; do \
@@ -256,7 +252,7 @@
done
install-man5: $(man5_MANS) $(man_MANS)
@$(NORMAL_INSTALL)
- test -z "$(man5dir)" || $(mkdir_p) "$(DESTDIR)$(man5dir)"
+ test -z "$(man5dir)" || $(MKDIR_P) "$(DESTDIR)$(man5dir)"
@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
for i in $$l2; do \
@@ -307,22 +303,21 @@
distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
@@ -338,7 +333,7 @@
all-am: Makefile $(MANS)
installdirs:
for dir in "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)"; do \
- test -z "$$dir" || $(mkdir_p) "$$dir"; \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
@@ -371,7 +366,7 @@
distclean: distclean-am
-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool
+distclean-am: clean-am distclean-generic
dvi: dvi-am
@@ -387,12 +382,20 @@
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
+install-dvi: install-dvi-am
+
install-exec-am:
+install-html: install-html-am
+
install-info: install-info-am
install-man: install-man3 install-man5
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -411,21 +414,24 @@
ps-am:
-uninstall-am: uninstall-info-am uninstall-local uninstall-man
+uninstall-am: uninstall-local uninstall-man
uninstall-man: uninstall-man3 uninstall-man5
+.MAKE: install-am install-data-am install-strip
+
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
distclean distclean-generic distclean-libtool distdir dvi \
dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-data-hook install-exec \
- install-exec-am install-info install-info-am install-man \
- install-man3 install-man5 install-strip installcheck \
+ install-data install-data-am install-data-hook install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-man3 install-man5 install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
- uninstall-info-am uninstall-local uninstall-man uninstall-man3 \
- uninstall-man5
+ uninstall-local uninstall-man uninstall-man3 uninstall-man5
install-data-hook: $(EL_MAN_LINKS)
Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/examples/Makefile.in
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/examples/Makefile.in (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/examples/Makefile.in Thu Dec 13 12:16:17 2007
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -14,15 +14,11 @@
@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
@@ -56,17 +52,18 @@
test_OBJECTS = $(am_test_OBJECTS)
test_LDADD = $(LDADD)
test_DEPENDENCIES = $(top_builddir)/src/libedit.la
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+DEFAULT_INCLUDES = -I. -I$(top_builddir)@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
- $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
SOURCES = $(fileman_SOURCES) $(test_SOURCES)
DIST_SOURCES = $(fileman_SOURCES) $(test_SOURCES)
ETAGS = etags
@@ -74,8 +71,6 @@
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
@@ -103,6 +98,7 @@
F77 = @F77@
FFLAGS = @FFLAGS@
GREP = @GREP@
+INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -116,6 +112,7 @@
LT_VERSION = @LT_VERSION@
MAKEINFO = @MAKEINFO@
MANTYPE = @MANTYPE@
+MKDIR_P = @MKDIR_P@
NROFF = @NROFF@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
@@ -130,13 +127,13 @@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -148,6 +145,7 @@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
+builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
@@ -175,8 +173,11 @@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
LDADD = $(top_builddir)/src/libedit.la
AM_CFLAGS = -I$(top_srcdir)/src
test_SOURCES = test.c
@@ -223,10 +224,10 @@
done
fileman$(EXEEXT): $(fileman_OBJECTS) $(fileman_DEPENDENCIES)
@rm -f fileman$(EXEEXT)
- $(LINK) $(fileman_LDFLAGS) $(fileman_OBJECTS) $(fileman_LDADD) $(LIBS)
+ $(LINK) $(fileman_OBJECTS) $(fileman_LDADD) $(LIBS)
test$(EXEEXT): $(test_OBJECTS) $(test_DEPENDENCIES)
@rm -f test$(EXEEXT)
- $(LINK) $(test_LDFLAGS) $(test_OBJECTS) $(test_LDADD) $(LIBS)
+ $(LINK) $(test_OBJECTS) $(test_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
@@ -238,22 +239,22 @@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/test.Po at am__quote@
.c.o:
- at am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
- at am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
- at am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
- at am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
- at am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
- at am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
@@ -264,10 +265,6 @@
clean-libtool:
-rm -rf .libs _libs
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
-
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
@@ -317,22 +314,21 @@
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
@@ -380,7 +376,7 @@
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
- distclean-libtool distclean-tags
+ distclean-tags
dvi: dvi-am
@@ -394,12 +390,20 @@
install-data-am:
+install-dvi: install-dvi-am
+
install-exec-am:
+install-html: install-html-am
+
install-info: install-info-am
install-man:
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -420,19 +424,22 @@
ps-am:
-uninstall-am: uninstall-info-am
+uninstall-am:
+
+.MAKE: install-am install-strip
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
clean-libtool clean-noinstPROGRAMS ctags distclean \
distclean-compile distclean-generic distclean-libtool \
distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
- pdf pdf-am ps ps-am tags uninstall uninstall-am \
- uninstall-info-am
+ pdf pdf-am ps ps-am tags uninstall uninstall-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/ltmain.sh
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/ltmain.sh (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/ltmain.sh Thu Dec 13 12:16:17 2007
@@ -1,7 +1,7 @@
# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
#
@@ -17,7 +17,7 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -43,9 +43,14 @@
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION=1.5.6
-TIMESTAMP=" (1.1220.2.95 2004/04/11 05:50:42) Debian$Rev: 220 $"
+VERSION=1.5.22
+TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes.
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
# Check that we have a working $echo.
if test "X$1" = X--no-reexec; then
@@ -83,14 +88,15 @@
Xsed="${SED}"' -e 1s/^X//'
sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
# test EBCDIC or ASCII
-case `echo A|tr A '\301'` in
- A) # EBCDIC based system
- SP2NL="tr '\100' '\n'"
- NL2SP="tr '\r\n' '\100\100'"
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ SP2NL='tr \040 \012'
+ NL2SP='tr \015\012 \040\040'
;;
- *) # Assume ASCII based system
- SP2NL="tr '\040' '\012'"
- NL2SP="tr '\015\012' '\040\040'"
+ *) # EBCDIC based system
+ SP2NL='tr \100 \n'
+ NL2SP='tr \r\n \100\100'
;;
esac
@@ -107,8 +113,9 @@
fi
# Make sure IFS has a sensible default
-: ${IFS="
-"}
+lt_nl='
+'
+IFS=" $lt_nl"
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
$echo "$modename: not configured to build any kind of library" 1>&2
@@ -125,6 +132,8 @@
show="$echo"
show_help=
execute_dlfiles=
+duplicate_deps=no
+preserve_args=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
@@ -132,13 +141,51 @@
# Shell function definitions:
# This seems to be the best place for them
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+ my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+ if test "$run" = ":"; then
+ # Return a directory name, but don't create it in dry-run mode
+ my_tmpdir="${my_template}-$$"
+ else
+
+ # If mktemp works, use that first and foremost
+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$my_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+ save_mktempdir_umask=`umask`
+ umask 0077
+ $mkdir "$my_tmpdir"
+ umask $save_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$my_tmpdir" || {
+ $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
+ exit $EXIT_FAILURE
+ }
+ fi
+
+ $echo "X$my_tmpdir" | $Xsed
+}
+
+
# func_win32_libid arg
# return the library type of file 'arg'
#
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
-func_win32_libid () {
+func_win32_libid ()
+{
win32_libid_type="unknown"
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
@@ -149,12 +196,11 @@
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
$EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
win32_nmres=`eval $NM -f posix -A $1 | \
- sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
- if test "X$win32_nmres" = "Ximport" ; then
- win32_libid_type="x86 archive import"
- else
- win32_libid_type="x86 archive static"
- fi
+ $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
fi
;;
*DLL*)
@@ -178,7 +224,8 @@
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
# arg is usually of the form 'gcc ...'
-func_infer_tag () {
+func_infer_tag ()
+{
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
@@ -235,12 +282,116 @@
esac
fi
}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+
+ $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+ $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+ exit $EXIT_FAILURE
+ fi
+}
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+ my_status=""
+
+ $show "${rm}r $my_gentop"
+ $run ${rm}r "$my_gentop"
+ $show "$mkdir $my_gentop"
+ $run $mkdir "$my_gentop"
+ my_status=$?
+ if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+ exit $my_status
+ fi
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+ my_xdir="$my_gentop/$my_xlib"
+
+ $show "${rm}r $my_xdir"
+ $run ${rm}r "$my_xdir"
+ $show "$mkdir $my_xdir"
+ $run $mkdir "$my_xdir"
+ exit_status=$?
+ if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
+ exit $exit_status
+ fi
+ case $host in
+ *-darwin*)
+ $show "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ if test -z "$run"; then
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+ darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ $show "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+ lipo -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ ${rm}r unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd "$darwin_orig_dir"
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ fi # $run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+ done
+ func_extract_archives_result="$my_oldobjs"
+}
# End of Shell function definitions
#####################################
# Darwin sucks
eval std_shrext=\"$shrext_cmds\"
+disable_libs=no
+
# Parse our command line options once, thoroughly.
while test "$#" -gt 0
do
@@ -305,10 +456,10 @@
--version)
$echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
$echo
- $echo "Copyright (C) 2003 Free Software Foundation, Inc."
+ $echo "Copyright (C) 2005 Free Software Foundation, Inc."
$echo "This is free software; see the source for copying conditions. There is NO"
$echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
- exit $EXIT_SUCCESS
+ exit $?
;;
--config)
@@ -317,7 +468,7 @@
for tagname in $taglist; do
${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
done
- exit $EXIT_SUCCESS
+ exit $?
;;
--debug)
@@ -342,7 +493,7 @@
else
$echo "disable static libraries"
fi
- exit $EXIT_SUCCESS
+ exit $?
;;
--finish) mode="finish" ;;
@@ -357,7 +508,11 @@
preserve_args="$preserve_args $arg"
;;
- --tag) prevopt="--tag" prev=tag ;;
+ --tag)
+ prevopt="--tag"
+ prev=tag
+ preserve_args="$preserve_args --tag"
+ ;;
--tag=*)
set tag "$optarg" ${1+"$@"}
shift
@@ -389,6 +544,18 @@
exit $EXIT_FAILURE
fi
+case $disable_libs in
+no)
+ ;;
+shared)
+ build_libtool_libs=no
+ build_old_libs=yes
+ ;;
+static)
+ build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+ ;;
+esac
+
# If this variable is set in any of the actions, the command in it
# will be execed at the end. This prevents here-documents from being
# left over by shells.
@@ -399,7 +566,7 @@
# Infer the operation mode.
if test -z "$mode"; then
$echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
- $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2
+ $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
case $nonopt in
*cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
mode=link
@@ -465,7 +632,7 @@
for arg
do
- case "$arg_mode" in
+ case $arg_mode in
arg )
# do not "continue". Instead, add this to base_compile
lastarg="$arg"
@@ -547,7 +714,10 @@
case $lastarg in
# Double-quote args containing other shell metacharacters.
# Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
+ # in scan sets, and some SunOS ksh mistreat backslash-escaping
+ # in scan sets (worked around with variable expansion),
+ # and furthermore cannot handle '|' '&' '(' ')' in scan sets
+ # at all, so we specify them separately.
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
lastarg="\"$lastarg\""
;;
@@ -621,6 +791,14 @@
esac
done
+ qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
+ case $qlibobj in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ qlibobj="\"$qlibobj\"" ;;
+ esac
+ test "X$libobj" != "X$qlibobj" \
+ && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
if test "X$xdir" = "X$obj"; then
@@ -693,12 +871,17 @@
$run $rm $removelist
exit $EXIT_FAILURE
fi
- $echo $srcfile > "$lockfile"
+ $echo "$srcfile" > "$lockfile"
fi
if test -n "$fix_srcfile_path"; then
eval srcfile=\"$fix_srcfile_path\"
fi
+ qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
+ case $qsrcfile in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ qsrcfile="\"$qsrcfile\"" ;;
+ esac
$run $rm "$libobj" "${libobj}T"
@@ -720,18 +903,18 @@
fbsd_hideous_sh_bug=$base_compile
if test "$pic_mode" != no; then
- command="$base_compile $srcfile $pic_flag"
+ command="$base_compile $qsrcfile $pic_flag"
else
# Don't build PIC code
- command="$base_compile $srcfile"
+ command="$base_compile $qsrcfile"
fi
if test ! -d "${xdir}$objdir"; then
$show "$mkdir ${xdir}$objdir"
$run $mkdir ${xdir}$objdir
- status=$?
- if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
- exit $status
+ exit_status=$?
+ if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
+ exit $exit_status
fi
fi
@@ -803,9 +986,9 @@
if test "$build_old_libs" = yes; then
if test "$pic_mode" != yes; then
# Don't build PIC code
- command="$base_compile $srcfile"
+ command="$base_compile $qsrcfile"
else
- command="$base_compile $srcfile $pic_flag"
+ command="$base_compile $qsrcfile $pic_flag"
fi
if test "$compiler_c_o" = yes; then
command="$command -o $obj"
@@ -934,6 +1117,7 @@
no_install=no
objs=
non_pic_objects=
+ notinst_path= # paths that contain not-installed libtool libraries
precious_files_regex=
prefer_static_libs=no
preload=no
@@ -962,14 +1146,15 @@
if test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
+ prefer_static_libs=yes
else
if test -z "$pic_flag" && test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
+ prefer_static_libs=built
fi
build_libtool_libs=no
build_old_libs=yes
- prefer_static_libs=yes
break
;;
esac
@@ -1144,6 +1329,11 @@
if test -z "$pic_object" || test "$pic_object" = none ; then
arg="$non_pic_object"
fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ non_pic_objects="$non_pic_objects $non_pic_object"
fi
else
# Only an error if not doing a dry-run.
@@ -1227,6 +1417,13 @@
prev=
continue
;;
+ darwin_framework|darwin_framework_skip)
+ test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ prev=
+ continue
+ ;;
*)
eval "$prev=\"\$arg\""
prev=
@@ -1285,6 +1482,18 @@
continue
;;
+ -framework|-arch|-isysroot)
+ case " $CC " in
+ *" ${arg} ${1} "* | *" ${arg} ${1} "*)
+ prev=darwin_framework_skip ;;
+ *) compiler_flags="$compiler_flags $arg"
+ prev=darwin_framework ;;
+ esac
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ continue
+ ;;
+
-inst-prefix-dir)
prev=inst_prefix
continue
@@ -1311,7 +1520,8 @@
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
$echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
- exit $EXIT_FAILURE
+ absdir="$dir"
+ notinst_path="$notinst_path $dir"
fi
dir="$absdir"
;;
@@ -1325,10 +1535,15 @@
esac
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$dir:"*) ;;
*) dllsearchpath="$dllsearchpath:$dir";;
esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$testbindir";;
+ esac
;;
esac
continue
@@ -1337,15 +1552,15 @@
-l*)
if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
case $host in
- *-*-cygwin* | *-*-pw32* | *-*-beos*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
# These systems don't actually have a C or math library (as such)
continue
;;
- *-*-mingw* | *-*-os2*)
+ *-*-os2*)
# These systems don't actually have a C library (as such)
test "X$arg" = "X-lc" && continue
;;
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
test "X$arg" = "X-lc" && continue
;;
@@ -1353,10 +1568,19 @@
# Rhapsody C and math libraries are in the System framework
deplibs="$deplibs -framework System"
continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ test "X$arg" = "X-lc" && continue
+ ;;
esac
elif test "X$arg" = "X-lc_r"; then
case $host in
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc_r directly, use -pthread flag.
continue
;;
@@ -1366,8 +1590,20 @@
continue
;;
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ -model)
+ compile_command="$compile_command $arg"
+ compiler_flags="$compiler_flags $arg"
+ finalize_command="$finalize_command $arg"
+ prev=xcompiler
+ continue
+ ;;
+
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
- deplibs="$deplibs $arg"
+ compiler_flags="$compiler_flags $arg"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
continue
;;
@@ -1376,13 +1612,19 @@
continue
;;
- # gcc -m* arguments should be passed to the linker via $compiler_flags
- # in order to pass architecture information to the linker
- # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo
- # but this is not reliable with gcc because gcc may use -mfoo to
- # select a different linker, different libraries, etc, while
- # -Wl,-mfoo simply passes -mfoo to the linker.
- -m*)
+ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+ # -r[0-9][0-9]* specifies the processor on the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+ # +DA*, +DD* enable 64-bit mode on the HP compiler
+ # -q* pass through compiler args for the IBM compiler
+ # -m* pass through architecture-specific compiler args for GCC
+ # -m*, -t[45]*, -txscale* pass through architecture-specific
+ # compiler args for GCC
+ # -pg pass through profiling flag for GCC
+ # @file GCC response files
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
+ -t[45]*|-txscale*|@*)
+
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
@@ -1393,9 +1635,7 @@
esac
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
- if test "$with_gcc" = "yes" ; then
- compiler_flags="$compiler_flags $arg"
- fi
+ compiler_flags="$compiler_flags $arg"
continue
;;
@@ -1633,6 +1873,11 @@
if test -z "$pic_object" || test "$pic_object" = none ; then
arg="$non_pic_object"
fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ non_pic_objects="$non_pic_objects $non_pic_object"
fi
else
# Only an error if not doing a dry-run.
@@ -1738,9 +1983,9 @@
if test ! -d "$output_objdir"; then
$show "$mkdir $output_objdir"
$run $mkdir $output_objdir
- status=$?
- if test "$status" -ne 0 && test ! -d "$output_objdir"; then
- exit $status
+ exit_status=$?
+ if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
+ exit $exit_status
fi
fi
@@ -1803,7 +2048,6 @@
newlib_search_path=
need_relink=no # whether we're linking any uninstalled libtool libraries
notinst_deplibs= # not-installed libtool libraries
- notinst_path= # paths that contain not-installed libtool libraries
case $linkmode in
lib)
passes="conv link"
@@ -1838,10 +2082,7 @@
case $pass in
dlopen) libs="$dlfiles" ;;
dlpreopen) libs="$dlprefiles" ;;
- link)
- libs="$deplibs %DEPLIBS%"
- test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
- ;;
+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
esac
fi
if test "$pass" = dlopen; then
@@ -1858,7 +2099,7 @@
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
- deplibs="$deplib $deplibs"
+ compiler_flags="$compiler_flags $deplib"
fi
continue
;;
@@ -1977,7 +2218,22 @@
fi
case $linkmode in
lib)
- if test "$deplibs_check_method" != pass_all; then
+ valid_a_lib=no
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method
+ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ if eval $echo \"$deplib\" 2>/dev/null \
+ | $SED 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=yes
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=yes
+ ;;
+ esac
+ if test "$valid_a_lib" != yes; then
$echo
$echo "*** Warning: Trying to link with static lib archive $deplib."
$echo "*** I have the capability to make that library automatically link in when"
@@ -2027,7 +2283,7 @@
esac # case $deplib
if test "$found" = yes || test -f "$lib"; then :
else
- $echo "$modename: cannot find the library \`$lib'" 1>&2
+ $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
exit $EXIT_FAILURE
fi
@@ -2051,6 +2307,8 @@
# it will not redefine variables installed, or shouldnotlink
installed=yes
shouldnotlink=no
+ avoidtemprpath=
+
# Read the .la file
case $lib in
@@ -2149,11 +2407,19 @@
dir="$libdir"
absdir="$libdir"
fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ dir="$ladir"
+ absdir="$abs_ladir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ fi
fi # $installed = yes
name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
@@ -2226,12 +2492,12 @@
if test -n "$library_names" &&
{ test "$prefer_static_libs" = no || test -z "$old_library"; }; then
# We need to hardcode the library path
- if test -n "$shlibpath_var"; then
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
# Make sure the rpath contains only unique directories.
case "$temp_rpath " in
*" $dir "*) ;;
*" $absdir "*) ;;
- *) temp_rpath="$temp_rpath $dir" ;;
+ *) temp_rpath="$temp_rpath $absdir" ;;
esac
fi
@@ -2268,8 +2534,12 @@
fi
link_static=no # Whether the deplib will be linked statically
+ use_static_libs=$prefer_static_libs
+ if test "$use_static_libs" = built && test "$installed" = yes ; then
+ use_static_libs=no
+ fi
if test -n "$library_names" &&
- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+ { test "$use_static_libs" = no || test -z "$old_library"; }; then
if test "$installed" = no; then
notinst_deplibs="$notinst_deplibs $lib"
need_relink=yes
@@ -2382,11 +2652,15 @@
if test "$hardcode_direct" = no; then
add="$dir/$linklib"
case $host in
- *-*-sco3.2v5* ) add_dir="-L$dir" ;;
+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+ *-*-unixware7*) add_dir="-L$dir" ;;
*-*-darwin* )
# if the lib is a module then we can not link against
# it, someone is ignoring the new warnings I added
- if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then
+ if /usr/bin/file -L $add 2> /dev/null |
+ $EGREP ": [^:]* bundle" >/dev/null ; then
$echo "** Warning, lib $linklib is a module, not a shared library"
if test -z "$old_library" ; then
$echo
@@ -2417,7 +2691,7 @@
add_dir="-L$dir"
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
- case "$libdir" in
+ case $libdir in
[\\/]*)
add_dir="$add_dir -L$inst_prefix_dir$libdir"
;;
@@ -2490,7 +2764,7 @@
add_dir="-L$libdir"
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
- case "$libdir" in
+ case $libdir in
[\\/]*)
add_dir="$add_dir -L$inst_prefix_dir$libdir"
;;
@@ -2551,8 +2825,6 @@
fi
fi
else
- convenience="$convenience $dir/$old_library"
- old_convenience="$old_convenience $dir/$old_library"
deplibs="$dir/$old_library $deplibs"
link_static=yes
fi
@@ -2670,12 +2942,12 @@
*) continue ;;
esac
case " $deplibs " in
- *" $depdepl "*) ;;
- *) deplibs="$depdepl $deplibs" ;;
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
esac
case " $deplibs " in
- *" $path "*) ;;
- *) deplibs="$deplibs $path" ;;
+ *" $depdepl "*) ;;
+ *) deplibs="$depdepl $deplibs" ;;
esac
done
fi # link_all_deplibs != no
@@ -2929,11 +3201,6 @@
age="$number_minor"
revision="$number_minor"
;;
- *)
- $echo "$modename: unknown library version type \`$version_type'" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit $EXIT_FAILURE
- ;;
esac
;;
no)
@@ -2945,27 +3212,27 @@
# Check that each of the things are valid numbers.
case $current in
- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+ $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
esac
case $revision in
- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+ $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
esac
case $age in
- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+ $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
@@ -2991,7 +3258,7 @@
versuffix="$major.$age.$revision"
# Darwin ld doesn't like 0 for these options...
minor_current=`expr $current + 1`
- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
;;
freebsd-aout)
@@ -3144,9 +3411,9 @@
# Eliminate all temporary directories.
for path in $notinst_path; do
- lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
- deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
- dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
+ lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+ deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+ dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
done
if test -n "$xrpath"; then
@@ -3197,9 +3464,14 @@
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
;;
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
;;
*)
# Add libc to deplibs on all other systems if necessary.
@@ -3243,11 +3515,11 @@
int main() { return 0; }
EOF
$rm conftest
- $LTCC -o conftest conftest.c $deplibs
+ $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
if test "$?" -eq 0 ; then
ldd_output=`ldd conftest`
for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
+ name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" -ne "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
@@ -3284,11 +3556,11 @@
# Error occurred in the first compile. Let's try to salvage
# the situation: Compile a separate program for each library.
for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
+ name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
$rm conftest
- $LTCC -o conftest conftest.c $i
+ $LTCC $LTCFLAGS -o conftest conftest.c $i
# Did it work?
if test "$?" -eq 0 ; then
ldd_output=`ldd conftest`
@@ -3336,7 +3608,7 @@
set dummy $deplibs_check_method
file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
for a_deplib in $deplibs; do
- name="`expr $a_deplib : '-l\(.*\)'`"
+ name=`expr $a_deplib : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
@@ -3405,7 +3677,7 @@
set dummy $deplibs_check_method
match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
for a_deplib in $deplibs; do
- name="`expr $a_deplib : '-l\(.*\)'`"
+ name=`expr $a_deplib : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test -n "$name" && test "$name" != "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
@@ -3535,6 +3807,35 @@
deplibs=$newdeplibs
fi
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $deplibs " in
+ *" -L$path/$objdir "*)
+ new_libs="$new_libs -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ done
+ deplibs="$new_libs"
+
+
# All the library-specific variables (install_libdir is set above).
library_names=
old_library=
@@ -3618,6 +3919,7 @@
fi
lib="$output_objdir/$realname"
+ linknames=
for link
do
linknames="$linknames $link"
@@ -3646,6 +3948,9 @@
# The command line is too long to execute in one step.
$show "using reloadable object file for export list..."
skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
fi
done
IFS="$save_ifs"
@@ -3679,67 +3984,13 @@
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
else
gentop="$output_objdir/${outputname}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test "$status" -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
generated="$generated $gentop"
- for xlib in $convenience; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- # We will extract separately just the conflicting names and we will no
- # longer touch any unique names. It is faster to leave these extract
- # automatically by $AR in one run.
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
- $AR t "$xabs" | sort | uniq -cd | while read -r count name
- do
- i=1
- while test "$i" -le "$count"
- do
- # Put our $i before any first dot (extension)
- # Never overwrite any file
- name_to="$name"
- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
- do
- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
- done
- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
- i=`expr $i + 1`
- done
- done
- fi
-
- libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
- done
+ func_extract_archives $gentop $convenience
+ libobjs="$libobjs $func_extract_archives_result"
fi
fi
-
+
if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
linker_flags="$linker_flags $flag"
@@ -3769,7 +4020,8 @@
fi
fi
- if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` &&
+ if test "X$skipped_export" != "X:" &&
+ len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
:
else
@@ -3788,6 +4040,7 @@
save_libobjs=$libobjs
fi
save_output=$output
+ output_la=`$echo "X$output" | $Xsed -e "$basename"`
# Clear the reloadable object creation command queue and
# initialize k to one.
@@ -3797,13 +4050,13 @@
delfiles=
last_robj=
k=1
- output=$output_objdir/$save_output-${k}.$objext
+ output=$output_objdir/$output_la-${k}.$objext
# Loop over the list of objects to be linked.
for obj in $save_libobjs
do
eval test_cmds=\"$reload_cmds $objlist $last_robj\"
if test "X$objlist" = X ||
- { len=`expr "X$test_cmds" : ".*"` &&
+ { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len"; }; then
objlist="$objlist $obj"
else
@@ -3817,9 +4070,9 @@
# the last one created.
eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
fi
- last_robj=$output_objdir/$save_output-${k}.$objext
+ last_robj=$output_objdir/$output_la-${k}.$objext
k=`expr $k + 1`
- output=$output_objdir/$save_output-${k}.$objext
+ output=$output_objdir/$output_la-${k}.$objext
objlist=$obj
len=1
fi
@@ -3839,13 +4092,13 @@
eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
fi
- # Set up a command to remove the reloadale object files
+ # Set up a command to remove the reloadable object files
# after they are used.
i=0
while test "$i" -lt "$k"
do
i=`expr $i + 1`
- delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
+ delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
done
$echo "creating a temporary reloadable object file: $output"
@@ -3893,13 +4146,30 @@
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
- $run eval "$cmd" || exit $?
+ $run eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+ fi
+
+ exit $lt_exit
+ }
done
IFS="$save_ifs"
# Restore the uninstalled library and exit
if test "$mode" = relink; then
$run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ fi
+ fi
+
exit $EXIT_SUCCESS
fi
@@ -3977,64 +4247,10 @@
eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
else
gentop="$output_objdir/${obj}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test "$status" -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
generated="$generated $gentop"
- for xlib in $convenience; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- # We will extract separately just the conflicting names and we will no
- # longer touch any unique names. It is faster to leave these extract
- # automatically by $AR in one run.
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
- $AR t "$xabs" | sort | uniq -cd | while read -r count name
- do
- i=1
- while test "$i" -le "$count"
- do
- # Put our $i before any first dot (extension)
- # Never overwrite any file
- name_to="$name"
- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
- do
- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
- done
- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
- i=`expr $i + 1`
- done
- done
- fi
-
- reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
- done
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
fi
fi
@@ -4135,6 +4351,35 @@
;;
esac
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $compile_deplibs " in
+ *" -L$path/$objdir "*)
+ new_libs="$new_libs -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $compile_deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ done
+ compile_deplibs="$new_libs"
+
+
compile_command="$compile_command $compile_deplibs"
finalize_command="$finalize_command $finalize_deplibs"
@@ -4179,10 +4424,15 @@
fi
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$libdir:"*) ;;
*) dllsearchpath="$dllsearchpath:$libdir";;
esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$testbindir";;
+ esac
;;
esac
done
@@ -4296,13 +4546,25 @@
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$output.exp"
+ export_symbols="$output_objdir/$outputname.exp"
$run $rm $export_symbols
- $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* )
+ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
else
- $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+ $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
$run eval 'mv "$nlist"T "$nlist"'
+ case $host in
+ *cygwin* | *mingw* )
+ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
fi
fi
@@ -4353,7 +4615,26 @@
#endif
/* The mapping between symbol names and symbols. */
+"
+
+ case $host in
+ *cygwin* | *mingw* )
+ $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+ runtime relocations are performed -- see ld's documentation
+ on pseudo-relocs */
+struct {
+"
+ ;;
+ * )
+ $echo >> "$output_objdir/$dlsyms" "\
const struct {
+"
+ ;;
+ esac
+
+
+ $echo >> "$output_objdir/$dlsyms" "\
const char *name;
lt_ptr address;
}
@@ -4400,16 +4681,29 @@
esac
# Now compile the dynamic symbol file.
- $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
- $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+ $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+ $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
# Clean up the generated files.
$show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
$run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
# Transform the symbol file into the correct name.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ case $host in
+ *cygwin* | *mingw* )
+ if test -f "$output_objdir/${outputname}.def" ; then
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+ else
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ fi
+ ;;
+ * )
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ ;;
+ esac
;;
*)
$echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
@@ -4434,7 +4728,7 @@
# We have no uninstalled library dependencies, so finalize right now.
$show "$link_command"
$run eval "$link_command"
- status=$?
+ exit_status=$?
# Delete the generated files.
if test -n "$dlsyms"; then
@@ -4442,7 +4736,7 @@
$run $rm "$output_objdir/${outputname}S.${objext}"
fi
- exit $status
+ exit $exit_status
fi
if test -n "$shlibpath_var"; then
@@ -4582,10 +4876,12 @@
esac
case $host in
*cygwin* | *mingw* )
- cwrappersource=`$echo ${objdir}/lt-${output}.c`
- cwrapper=`$echo ${output}.exe`
- $rm $cwrappersource $cwrapper
- trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+ output_name=`basename $output`
+ output_path=`dirname $output`
+ cwrappersource="$output_path/$objdir/lt-$output_name.c"
+ cwrapper="$output_path/$output_name.exe"
+ $rm $cwrappersource $cwrapper
+ trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
cat > $cwrappersource <<EOF
@@ -4610,6 +4906,9 @@
#include <malloc.h>
#include <stdarg.h>
#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <sys/stat.h>
#if defined(PATH_MAX)
# define LT_PATHMAX PATH_MAX
@@ -4620,15 +4919,19 @@
#endif
#ifndef DIR_SEPARATOR
-#define DIR_SEPARATOR '/'
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
#endif
#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
defined (__OS2__)
-#define HAVE_DOS_BASED_FILE_SYSTEM
-#ifndef DIR_SEPARATOR_2
-#define DIR_SEPARATOR_2 '\\'
-#endif
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
#endif
#ifndef DIR_SEPARATOR_2
@@ -4638,17 +4941,32 @@
(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
#endif /* DIR_SEPARATOR_2 */
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
#define XFREE(stale) do { \
if (stale) { free ((void *) stale); stale = 0; } \
} while (0)
+/* -DDEBUG is fairly common in CFLAGS. */
+#undef DEBUG
+#if defined DEBUGWRAPPER
+# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
+#else
+# define DEBUG(format, ...)
+#endif
+
const char *program_name = NULL;
void * xmalloc (size_t num);
char * xstrdup (const char *string);
-char * basename (const char *name);
-char * fnqualify(const char *path);
+const char * base_name (const char *name);
+char * find_executable(const char *wrapper);
+int check_executable(const char *path);
char * strendzap(char *str, const char *pat);
void lt_fatal (const char *message, ...);
@@ -4658,29 +4976,51 @@
char **newargz;
int i;
- program_name = (char *) xstrdup ((char *) basename (argv[0]));
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ DEBUG("(main) argv[0] : %s\n",argv[0]);
+ DEBUG("(main) program_name : %s\n",program_name);
newargz = XMALLOC(char *, argc+2);
EOF
- cat >> $cwrappersource <<EOF
- newargz[0] = "$SHELL";
+ cat >> $cwrappersource <<EOF
+ newargz[0] = (char *) xstrdup("$SHELL");
EOF
- cat >> $cwrappersource <<"EOF"
- newargz[1] = fnqualify(argv[0]);
+ cat >> $cwrappersource <<"EOF"
+ newargz[1] = find_executable(argv[0]);
+ if (newargz[1] == NULL)
+ lt_fatal("Couldn't find %s", argv[0]);
+ DEBUG("(main) found exe at : %s\n",newargz[1]);
/* we know the script has the same name, without the .exe */
/* so make sure newargz[1] doesn't end in .exe */
strendzap(newargz[1],".exe");
for (i = 1; i < argc; i++)
newargz[i+1] = xstrdup(argv[i]);
newargz[argc+1] = NULL;
+
+ for (i=0; i<argc+1; i++)
+ {
+ DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);
+ ;
+ }
+
EOF
- cat >> $cwrappersource <<EOF
+ case $host_os in
+ mingw*)
+ cat >> $cwrappersource <<EOF
+ execv("$SHELL",(char const **)newargz);
+EOF
+ ;;
+ *)
+ cat >> $cwrappersource <<EOF
execv("$SHELL",newargz);
EOF
+ ;;
+ esac
- cat >> $cwrappersource <<"EOF"
+ cat >> $cwrappersource <<"EOF"
+ return 127;
}
void *
@@ -4700,48 +5040,148 @@
;
}
-char *
-basename (const char *name)
+const char *
+base_name (const char *name)
{
const char *base;
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
/* Skip over the disk name in MSDOS pathnames. */
- if (isalpha (name[0]) && name[1] == ':')
+ if (isalpha ((unsigned char)name[0]) && name[1] == ':')
name += 2;
#endif
for (base = name; *name; name++)
if (IS_DIR_SEPARATOR (*name))
base = name + 1;
- return (char *) base;
+ return base;
+}
+
+int
+check_executable(const char * path)
+{
+ struct stat st;
+
+ DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0) &&
+ (
+ /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
+#if defined (S_IXOTH)
+ ((st.st_mode & S_IXOTH) == S_IXOTH) ||
+#endif
+#if defined (S_IXGRP)
+ ((st.st_mode & S_IXGRP) == S_IXGRP) ||
+#endif
+ ((st.st_mode & S_IXUSR) == S_IXUSR))
+ )
+ return 1;
+ else
+ return 0;
}
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise */
char *
-fnqualify(const char *path)
+find_executable (const char* wrapper)
{
- size_t size;
- char *p;
+ int has_slash = 0;
+ const char* p;
+ const char* p_next;
+ /* static buffer for getcwd */
char tmp[LT_PATHMAX + 1];
+ int tmp_len;
+ char* concat_name;
- assert(path != NULL);
+ DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
- /* Is it qualified already? */
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
+
+ /* Absolute path? */
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- if (isalpha (path[0]) && path[1] == ':')
- return xstrdup (path);
+ if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable(concat_name))
+ return concat_name;
+ XFREE(concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable(concat_name))
+ return concat_name;
+ XFREE(concat_name);
+ }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ }
#endif
- if (IS_DIR_SEPARATOR (path[0]))
- return xstrdup (path);
- /* prepend the current directory */
- /* doesn't handle '~' */
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char* path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char* q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR(*q))
+ break;
+ p_len = q - p;
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal ("getcwd failed");
+ tmp_len = strlen(tmp);
+ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable(concat_name))
+ return concat_name;
+ XFREE(concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
if (getcwd (tmp, LT_PATHMAX) == NULL)
lt_fatal ("getcwd failed");
- size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */
- p = XMALLOC(char, size);
- sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path);
- return p;
+ tmp_len = strlen(tmp);
+ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable(concat_name))
+ return concat_name;
+ XFREE(concat_name);
+ return NULL;
}
char *
@@ -4785,16 +5225,16 @@
va_end (ap);
}
EOF
- # we should really use a build-platform specific compiler
- # here, but OTOH, the wrappers (shell script and this C one)
- # are only useful if you want to execute the "real" binary.
- # Since the "real" binary is built for $host, then this
- # wrapper might as well be built for $host, too.
- $run $LTCC -s -o $cwrapper $cwrappersource
- ;;
- esac
- $rm $output
- trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+ # we should really use a build-platform specific compiler
+ # here, but OTOH, the wrappers (shell script and this C one)
+ # are only useful if you want to execute the "real" binary.
+ # Since the "real" binary is built for $host, then this
+ # wrapper might as well be built for $host, too.
+ $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
+ ;;
+ esac
+ $rm $output
+ trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
$echo > $output "\
#! $SHELL
@@ -4815,7 +5255,7 @@
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
relink_command=\"$relink_command\"
@@ -4944,13 +5384,13 @@
# Backslashes separate directories on plain windows
*-*-mingw | *-*-os2*)
$echo >> $output "\
- exec \$progdir\\\\\$program \${1+\"\$@\"}
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
"
;;
*)
$echo >> $output "\
- exec \$progdir/\$program \${1+\"\$@\"}
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
"
;;
esac
@@ -4960,7 +5400,7 @@
fi
else
# The program doesn't exist.
- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+ \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
\$echo \"This script is just a wrapper for \$program.\" 1>&2
$echo \"See the $PACKAGE documentation for more information.\" 1>&2
exit $EXIT_FAILURE
@@ -4992,71 +5432,73 @@
if test -n "$addlibs"; then
gentop="$output_objdir/${outputname}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test "$status" -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
generated="$generated $gentop"
- # Add in members from convenience archives.
- for xlib in $addlibs; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- # We will extract separately just the conflicting names and we will no
- # longer touch any unique names. It is faster to leave these extract
- # automatically by $AR in one run.
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
- $AR t "$xabs" | sort | uniq -cd | while read -r count name
- do
- i=1
- while test "$i" -le "$count"
- do
- # Put our $i before any first dot (extension)
- # Never overwrite any file
- name_to="$name"
- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
- do
- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
- done
- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
- i=`expr $i + 1`
- done
- done
- fi
-
- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
- done
+ func_extract_archives $gentop $addlibs
+ oldobjs="$oldobjs $func_extract_archives_result"
fi
# Do each command in the archive commands.
if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
cmds=$old_archive_from_new_cmds
else
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ $echo "X$obj" | $Xsed -e 's%^.*/%%'
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "copying selected object files to avoid basename conflicts..."
+
+ if test -z "$gentop"; then
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ $show "$mkdir $gentop"
+ $run $mkdir "$gentop"
+ exit_status=$?
+ if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
+ exit $exit_status
+ fi
+ fi
+
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ counter=`expr $counter + 1`
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ $run ln "$obj" "$gentop/$newobj" ||
+ $run cp "$obj" "$gentop/$newobj"
+ oldobjs="$oldobjs $gentop/$newobj"
+ ;;
+ *) oldobjs="$oldobjs $obj" ;;
+ esac
+ done
+ fi
+
eval cmds=\"$old_archive_cmds\"
if len=`expr "X$cmds" : ".*"` &&
@@ -5070,20 +5512,7 @@
objlist=
concat_cmds=
save_oldobjs=$oldobjs
- # GNU ar 2.10+ was changed to match POSIX; thus no paths are
- # encoded into archives. This makes 'ar r' malfunction in
- # this piecewise linking case whenever conflicting object
- # names appear in distinct ar calls; check, warn and compensate.
- if (for obj in $save_oldobjs
- do
- $echo "X$obj" | $Xsed -e 's%^.*/%%'
- done | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2
- $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2
- AR_FLAGS=cq
- fi
+
# Is there a better way of finding the last object in the list?
for obj in $save_oldobjs
do
@@ -5094,7 +5523,7 @@
oldobjs="$objlist $obj"
objlist="$objlist $obj"
eval test_cmds=\"$old_archive_cmds\"
- if len=`expr "X$test_cmds" : ".*"` &&
+ if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len"; then
:
else
@@ -5291,11 +5720,11 @@
# install_prog (especially on Windows NT).
if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
# Allow the use of GNU shtool's install command.
- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
+ $echo "X$nonopt" | grep shtool > /dev/null; then
# Aesthetically quote it.
arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
@@ -5304,14 +5733,14 @@
shift
else
install_prog=
- arg="$nonopt"
+ arg=$nonopt
fi
# The real first argument should be the name of the installation program.
# Aesthetically quote it.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
@@ -5329,28 +5758,31 @@
do
if test -n "$dest"; then
files="$files $dest"
- dest="$arg"
+ dest=$arg
continue
fi
case $arg in
-d) isdir=yes ;;
- -f) prev="-f" ;;
- -g) prev="-g" ;;
- -m) prev="-m" ;;
- -o) prev="-o" ;;
+ -f)
+ case " $install_prog " in
+ *[\\\ /]cp\ *) ;;
+ *) prev=$arg ;;
+ esac
+ ;;
+ -g | -m | -o) prev=$arg ;;
-s)
stripme=" -s"
continue
;;
- -*) ;;
-
+ -*)
+ ;;
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
prev=
else
- dest="$arg"
+ dest=$arg
continue
fi
;;
@@ -5359,7 +5791,7 @@
# Aesthetically quote the argument.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
@@ -5528,11 +5960,14 @@
if test "$#" -gt 0; then
# Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
for linkname
do
if test "$linkname" != "$realname"; then
- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+ $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+ $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
fi
done
fi
@@ -5545,7 +5980,16 @@
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
- $run eval "$cmd" || exit $?
+ $run eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+ fi
+
+ exit $lt_exit
+ }
done
IFS="$save_ifs"
fi
@@ -5639,17 +6083,15 @@
notinst_deplibs=
relink_command=
- # To insure that "foo" is sourced, and not "foo.exe",
- # finese the cygwin/MSYS system by explicitly sourcing "foo."
- # which disallows the automatic-append-.exe behavior.
- case $build in
- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
- *) wrapperdot=${wrapper} ;;
- esac
+ # Note that it is not necessary on cygwin/mingw to append a dot to
+ # foo even if both foo and FILE.exe exist: automatic-append-.exe
+ # behavior happens only for exec(3), not for open(2)! Also, sourcing
+ # `FILE.' does not work on cygwin managed mounts.
+ #
# If there is no directory component, then add one.
- case $file in
- */* | *\\*) . ${wrapperdot} ;;
- *) . ./${wrapperdot} ;;
+ case $wrapper in
+ */* | *\\*) . ${wrapper} ;;
+ *) . ./${wrapper} ;;
esac
# Check the variables that should have been set.
@@ -5677,34 +6119,21 @@
done
relink_command=
- # To insure that "foo" is sourced, and not "foo.exe",
- # finese the cygwin/MSYS system by explicitly sourcing "foo."
- # which disallows the automatic-append-.exe behavior.
- case $build in
- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
- *) wrapperdot=${wrapper} ;;
- esac
+ # Note that it is not necessary on cygwin/mingw to append a dot to
+ # foo even if both foo and FILE.exe exist: automatic-append-.exe
+ # behavior happens only for exec(3), not for open(2)! Also, sourcing
+ # `FILE.' does not work on cygwin managed mounts.
+ #
# If there is no directory component, then add one.
- case $file in
- */* | *\\*) . ${wrapperdot} ;;
- *) . ./${wrapperdot} ;;
+ case $wrapper in
+ */* | *\\*) . ${wrapper} ;;
+ *) . ./${wrapper} ;;
esac
outputname=
if test "$fast_install" = no && test -n "$relink_command"; then
if test "$finalize" = yes && test -z "$run"; then
- tmpdir="/tmp"
- test -n "$TMPDIR" && tmpdir="$TMPDIR"
- tmpdir="$tmpdir/libtool-$$"
- save_umask=`umask`
- umask 0077
- if $mkdir "$tmpdir"; then
- umask $save_umask
- else
- umask $save_umask
- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
- continue
- fi
+ tmpdir=`func_mktempdir`
file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
outputname="$tmpdir/$file"
# Replace the output file specification.
@@ -5728,7 +6157,7 @@
fi
# remove .exe since cygwin /usr/bin/install will append another
- # one anyways
+ # one anyway
case $install_prog,$host in
*/usr/bin/install*,*cygwin*)
case $file:$destfile in
@@ -5828,7 +6257,7 @@
# Exit here if they wanted silent mode.
test "$show" = : && exit $EXIT_SUCCESS
- $echo "----------------------------------------------------------------------"
+ $echo "X----------------------------------------------------------------------" | $Xsed
$echo "Libraries have been installed in:"
for libdir in $libdirs; do
$echo " $libdir"
@@ -5861,7 +6290,7 @@
$echo
$echo "See any operating system documentation about shared libraries for"
$echo "more information, such as the ld(1) and ld.so(8) manual pages."
- $echo "----------------------------------------------------------------------"
+ $echo "X----------------------------------------------------------------------" | $Xsed
exit $EXIT_SUCCESS
;;
@@ -6078,9 +6507,17 @@
rmfiles="$rmfiles $objdir/$n"
done
test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
- test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
- if test "$mode" = uninstall; then
+ case "$mode" in
+ clean)
+ case " $library_names " in
+ # " " in the beginning catches empty $dlname
+ *" $dlname "*) ;;
+ *) rmfiles="$rmfiles $objdir/$dlname" ;;
+ esac
+ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+ ;;
+ uninstall)
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
cmds=$postuninstall_cmds
@@ -6113,7 +6550,8 @@
IFS="$save_ifs"
fi
# FIXME: should reinstall the best remaining shared library.
- fi
+ ;;
+ esac
fi
;;
@@ -6398,7 +6836,7 @@
$echo
$echo "Try \`$modename --help' for more information about other modes."
-exit $EXIT_SUCCESS
+exit $?
# The TAGs below are defined such that we never get into a situation
# in which we disable both kinds of libraries. Given conflicting
@@ -6412,12 +6850,11 @@
# configuration. But we'll never go from static-only to shared-only.
# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
+disable_libs=shared
# ### END LIBTOOL TAG CONFIG: disable-shared
# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac`
+disable_libs=static
# ### END LIBTOOL TAG CONFIG: disable-static
# Local Variables:
Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/src/Makefile.in
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/src/Makefile.in (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/src/Makefile.in Thu Dec 13 12:16:17 2007
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -15,15 +15,11 @@
@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
@@ -67,17 +63,21 @@
nodist_libedit_la_OBJECTS = $(am__objects_1)
libedit_la_OBJECTS = $(am_libedit_la_OBJECTS) \
$(nodist_libedit_la_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+libedit_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(libedit_la_LDFLAGS) $(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I. -I$(top_builddir)@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
- $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
SOURCES = $(libedit_la_SOURCES) $(nodist_libedit_la_SOURCES)
DIST_SOURCES = $(libedit_la_SOURCES)
nobase_includeHEADERS_INSTALL = $(install_sh_DATA)
@@ -87,8 +87,6 @@
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
@@ -116,6 +114,7 @@
F77 = @F77@
FFLAGS = @FFLAGS@
GREP = @GREP@
+INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -129,6 +128,7 @@
LT_VERSION = @LT_VERSION@
MAKEINFO = @MAKEINFO@
MANTYPE = @MANTYPE@
+MKDIR_P = @MKDIR_P@
NROFF = @NROFF@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
@@ -143,13 +143,13 @@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -161,6 +161,7 @@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
+builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
@@ -188,8 +189,11 @@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
BUILT_SOURCES = vi.h emacs.h common.h fcns.h help.h fcns.c help.c
AHDR = vi.h emacs.h common.h
ASRC = $(srcdir)/vi.c $(srcdir)/emacs.c $(srcdir)/common.c
@@ -243,7 +247,7 @@
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
@$(NORMAL_INSTALL)
- test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
+ test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
if test -f $$p; then \
f=$(am__strip_dir) \
@@ -254,7 +258,7 @@
uninstall-libLTLIBRARIES:
@$(NORMAL_UNINSTALL)
- @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+ @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
p=$(am__strip_dir) \
echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
$(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
@@ -269,7 +273,7 @@
rm -f "$${dir}/so_locations"; \
done
libedit.la: $(libedit_la_OBJECTS) $(libedit_la_DEPENDENCIES)
- $(LINK) -rpath $(libdir) $(libedit_la_LDFLAGS) $(libedit_la_OBJECTS) $(libedit_la_LIBADD) $(LIBS)
+ $(libedit_la_LINK) -rpath $(libdir) $(libedit_la_OBJECTS) $(libedit_la_LIBADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
@@ -306,22 +310,22 @@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/vis.Plo at am__quote@
.c.o:
- at am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
- at am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
- at am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
- at am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
- at am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
- at am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ at am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
@@ -331,13 +335,9 @@
clean-libtool:
-rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
install-nobase_includeHEADERS: $(nobase_include_HEADERS)
@$(NORMAL_INSTALL)
- test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)"
+ test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
@$(am__vpath_adj_setup) \
list='$(nobase_include_HEADERS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
@@ -404,23 +404,21 @@
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
- $(mkdir_p) $(distdir)/editline
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
@@ -437,7 +435,7 @@
all-am: Makefile $(LTLIBRARIES) $(HEADERS)
installdirs:
for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"; do \
- test -z "$$dir" || $(mkdir_p) "$$dir"; \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) install-am
@@ -475,7 +473,7 @@
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
- distclean-libtool distclean-tags
+ distclean-tags
dvi: dvi-am
@@ -489,12 +487,20 @@
install-data-am: install-nobase_includeHEADERS
+install-dvi: install-dvi-am
+
install-exec-am: install-libLTLIBRARIES
+install-html: install-html-am
+
install-info: install-info-am
install-man:
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -515,22 +521,25 @@
ps-am:
-uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES \
- uninstall-nobase_includeHEADERS
+uninstall-am: uninstall-libLTLIBRARIES uninstall-nobase_includeHEADERS
+
+.MAKE: install-am install-strip
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
clean-libLTLIBRARIES clean-libtool ctags distclean \
distclean-compile distclean-generic distclean-libtool \
distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am \
install-libLTLIBRARIES install-man \
- install-nobase_includeHEADERS install-strip installcheck \
+ install-nobase_includeHEADERS install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-info-am \
- uninstall-libLTLIBRARIES uninstall-nobase_includeHEADERS
+ tags uninstall uninstall-am uninstall-libLTLIBRARIES \
+ uninstall-nobase_includeHEADERS
vi.h: Makefile $(srcdir)/vi.c
Modified: freeswitch/branches/stkn/sofia-exp/trunk/src/include/switch_module_interfaces.h
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/src/include/switch_module_interfaces.h (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/src/include/switch_module_interfaces.h Thu Dec 13 12:16:17 2007
@@ -55,7 +55,7 @@
SWITCH_SHN_ON_TRANSMIT,
SWITCH_SHN_ON_HOLD,
SWITCH_SHN_ON_HIBERNATE,
- SWITCH_SHN_ON_RESET,
+ SWITCH_SHN_ON_RESET
} switch_state_handler_name_t;
struct switch_state_handler_table {
Modified: freeswitch/branches/stkn/sofia-exp/trunk/src/mod/applications/mod_dptools/mod_dptools.c
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/src/mod/applications/mod_dptools/mod_dptools.c (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/src/mod/applications/mod_dptools/mod_dptools.c Thu Dec 13 12:16:17 2007
@@ -658,7 +658,7 @@
switch_channel_event_set_data(channel, event);
switch_event_serialize(event, &buf, SWITCH_FALSE);
switch_assert(buf);
- switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_CRIT, "CHANNEL_DATA:\n%s\n", buf);
+ switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_INFO, "CHANNEL_DATA:\n%s\n", buf);
switch_event_destroy(&event);
free(buf);
}
Modified: freeswitch/branches/stkn/sofia-exp/trunk/src/mod/event_handlers/mod_cdr_csv/mod_cdr_csv.c
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/src/mod/event_handlers/mod_cdr_csv/mod_cdr_csv.c (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/src/mod/event_handlers/mod_cdr_csv/mod_cdr_csv.c Thu Dec 13 12:16:17 2007
@@ -278,7 +278,7 @@
switch_channel_event_set_data(channel, event);
switch_event_serialize(event, &buf, SWITCH_FALSE);
switch_assert(buf);
- switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_CRIT, "CHANNEL_DATA:\n%s\n", buf);
+ switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_INFO, "CHANNEL_DATA:\n%s\n", buf);
switch_event_destroy(&event);
free(buf);
}
Modified: freeswitch/branches/stkn/sofia-exp/trunk/src/switch_rtp.c
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/src/switch_rtp.c (original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/src/switch_rtp.c Thu Dec 13 12:16:17 2007
@@ -310,17 +310,17 @@
return END_PORT;
}
-static void release_port(switch_rtp_t *rtp_session)
+static void release_port(const char *host, int port)
{
switch_core_port_allocator_t *alloc = NULL;
- if (!rtp_session->rx_host) {
+ if (!host) {
return;
}
switch_mutex_lock(port_lock);
- if ((alloc = switch_core_hash_find(alloc_hash, rtp_session->rx_host))) {
- switch_core_port_allocator_free_port(alloc, rtp_session->rx_port);
+ if ((alloc = switch_core_hash_find(alloc_hash, host))) {
+ switch_core_port_allocator_free_port(alloc, port);
}
switch_mutex_unlock(port_lock);
@@ -412,7 +412,6 @@
*err = "Send myself a packet failed!";
goto done;
}
- release_port(rtp_session);
old_sock = rtp_session->sock;
rtp_session->sock = new_sock;
@@ -429,12 +428,6 @@
done:
- if (status == SWITCH_STATUS_SUCCESS) {
- rtp_session->rx_host = switch_core_strdup(rtp_session->pool, host);
- rtp_session->rx_port = port;
- rtp_session->ready = 1;
- }
-
if (new_sock) {
switch_socket_close(new_sock);
}
@@ -611,21 +604,31 @@
uint32_t ms_per_packet,
switch_rtp_flag_t flags, char *crypto_key, char *timer_name, const char **err, switch_memory_pool_t *pool)
{
- switch_rtp_t *rtp_session;
-
+ switch_rtp_t *rtp_session = NULL;
+
if (switch_rtp_create(&rtp_session, payload, samples_per_interval, ms_per_packet, flags, crypto_key, timer_name, err, pool) != SWITCH_STATUS_SUCCESS) {
- return NULL;
+ goto end;
}
-
+
if (switch_rtp_set_remote_address(rtp_session, tx_host, tx_port, err) != SWITCH_STATUS_SUCCESS) {
- return NULL;
+ rtp_session = NULL;
+ goto end;
}
if (switch_rtp_set_local_address(rtp_session, rx_host, rx_port, err) != SWITCH_STATUS_SUCCESS) {
- return NULL;
+ rtp_session = NULL;
+ }
+
+ end:
+
+ if (rtp_session) {
+ rtp_session->ready = 1;
+ rtp_session->rx_host = switch_core_strdup(rtp_session->pool, rx_host);
+ rtp_session->rx_port = rx_port;
+ } else {
+ release_port(rx_host, rx_port);
}
- rtp_session->ready = 1;
return rtp_session;
}
@@ -720,7 +723,7 @@
switch_core_timer_destroy(&(*rtp_session)->timer);
}
- release_port(*rtp_session);
+ release_port((*rtp_session)->rx_host, (*rtp_session)->rx_port);
switch_mutex_unlock((*rtp_session)->flag_mutex);
return;
More information about the Freeswitch-branches
mailing list