[Freeswitch-branches] [commit] r2650 - freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php
Freeswitch SVN
docelmo at freeswitch.org
Mon Sep 11 23:16:31 EDT 2006
Author: docelmo
Date: Mon Sep 11 23:16:25 2006
New Revision: 2650
Added:
freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/php.ini
Modified:
freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/Makefile
freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/apptest.php
freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/classFreeswitch.php
freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/mod_php.c
Log:
Php Coming along
Modified: freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/Makefile
==============================================================================
--- freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/Makefile (original)
+++ freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/Makefile Mon Sep 11 23:16:25 2006
@@ -2,7 +2,7 @@
PCFG=$(PREFIX)/bin/php-config
LCFLAGS=-fPIC -DZTS -DPTHREADS
-CFLAGS += `$(PCFG) --includes`
+CFLAGS += `$(PCFG) --includes` -g3
MDIR += `$(PCFG) --extension-dir`
PHPMOD=freeswitch
PHPLDFLAGS = `$(PCFG) --ldflags` -lcrypt -lresolv -lm -ldl -lnsl -lxml2 -lz -lphp5
@@ -10,7 +10,7 @@
all: depends $(MODNAME).$(DYNAMIC_LIB_EXTEN) $(PHPMOD).$(DYNAMIC_LIB_EXTEN)
depends:
- MAKE=$(MAKE) $(BASE)/build/buildlib.sh $(BASE) install php-5.1.6.tar.gz --prefix=$(PREFIX) --enable-embed=shared --enable-shared --with-pic --with-mysql --with-curl
+ MAKE=$(MAKE) $(BASE)/build/buildlib.sh $(BASE) install php-5.1.6.tar.gz --prefix=$(PREFIX) --enable-embed=shared --enable-shared --with-pic --with-mysql --with-curl --enable-maintainer-zts --with-tsrm-pthreads --enable-debug
%.o: %.c
$(CC) $(LCFLAGS) $(CFLAGS) -c $< -o $@
@@ -37,7 +37,13 @@
rm -fr *.$(DYNAMIC_LIB_EXTEN) *.o *~
install:
- mkdir -p $(MDIR)
- cp -f php_$(PHPMOD).$(DYNAMIC_LIB_EXTEN) $(MDIR)
+ #mkdir -p $(MDIR)
+ #cp -f php_$(PHPMOD).$(DYNAMIC_LIB_EXTEN) $(MDIR)
+ cp -f php_$(PHPMOD).$(DYNAMIC_LIB_EXTEN) $(PREFIX)/lib/php/extensions
cp -f $(MODNAME).$(DYNAMIC_LIB_EXTEN) $(PREFIX)/mod
cp -f $(PHPMOD).php $(PREFIX)/lib/php
+ cp -f classFreeswitch.php $(PREFIX)/lib/php
+ cp -f freeswitch.php $(PREFIX)/lib/php
+ cp -f apptest.php $(PREFIX)/scripts
+ cp -f test.php $(PREFIX)/scripts
+ cp -f php.ini $(PREFIX)/lib
Modified: freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/apptest.php
==============================================================================
--- freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/apptest.php (original)
+++ freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/apptest.php Mon Sep 11 23:16:25 2006
@@ -8,10 +8,10 @@
*/
require("classFreeswitch.php");
-$fs = new fs_class_api;
+$fs = new fs_class_api($uuid); // $uuid MUST be there for the class to work.
-$fs->fs_answer($session);
+$fs->fs_answer();
-$fs->fs_play_file($session, "/ram/sr8k.wav");
+//$fs->fs_play_file("/ram/sr8k.wav");
?>
Modified: freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/classFreeswitch.php
==============================================================================
--- freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/classFreeswitch.php (original)
+++ freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/classFreeswitch.php Mon Sep 11 23:16:25 2006
@@ -31,13 +31,12 @@
*
*/
require("freeswitch.php"); // Required for freeswitch driver to be loaded
-global $sessn;
+
class fs_class_api {
- function fs_class_api() {
- if($sessn = $this->fs_getsessn($uuid)){}
- else{
- echo "Couldnt get sessn!\n";
- }
+ Private $uuid;
+
+ function fs_class_api($uuid) {
+ $this->uuid = $uuid;
}
@@ -62,99 +61,88 @@
}
- function fs_getsessn($uuid){
-
- return fs_core_sessn_locate($uuid);
-
- }
function fs_answer(){
- fs_channel_answer($sessn);
+ fs_channel_answer($this->uuid);
}
- function fs_early_media($sessn){
+ function fs_early_media(){
- fs_channel_pre_answer($sessn);
+ fs_channel_pre_answer($this->uuid);
}
function fs_hangup($cause){
- fs_channel_hangup($sessn, $cause);
+ fs_channel_hangup($this->uuid, $cause);
}
function fs_set_variable($var, $val){
- fs_channel_set_variable($sessn, $var, $val);
+ fs_channel_set_variable($this->uuid, $var, $val);
}
function fs_get_variable($var){
- return fs_channel_get_var($sessn, $var);
+ return fs_channel_get_var($this->uuid, $var);
}
function fs_set_channel_state($state){
- fs_channel_set_state($sessn, $state);
+ fs_channel_set_state($this->uuid, $state);
}
function fs_play_file($file){
- return fs_ivr_play_file($sessn, $file, NULL, NULL, NULL, 0);
+ return fs_ivr_play_file($this->uuid, $file, NULL, NULL, NULL, 0);
}
function record_file($file){
- return fs_switch_ivr_record_file($sessn, NULL, $file, NULL, NULL, 0);
+ return fs_switch_ivr_record_file($this->uuid, NULL, $file, NULL, NULL, 0);
}
function fs_wait($ms){
- return fs_switch_ivr_sleep($sessn, $ms);
+ return fs_switch_ivr_sleep($this->uuid, $ms);
}
function fs_get_dtmf_callback($len){
- return fs_switch_ivr_collect_digits_callback($sessn, NULL, NULL, $len);
+ return fs_switch_ivr_collect_digits_callback($this->uuid, NULL, NULL, $len);
}
function fs_get_digit_count ($maxdigits, $terminator, $timeout){
- return fs_switch_ivr_collect_digits_count($sessn, NULL, NULL, $maxdigits, NULL, $terminator, $timeout);
+ return fs_switch_ivr_collect_digits_count($this->uuid, NULL, NULL, $maxdigits, NULL, $terminator, $timeout);
}
- function fs_x_way($peer_sessn, $dtmf, $sessn_data, $peer_data){
-
- return fs_switch_ivr_multi_threaded_bridge ($sessn, $peer_sessn, $dtmf, $sessn_data, $peer_data);
-
- }
-
function fs_dial($data, $timelimit){
- return fs_switch_ivr_originate(sessn, NULL, $data, $timelimit, NULL, NULL, NULL, NULL);
+ return fs_switch_ivr_originate($this->uuid, NULL, $data, $timelimit, NULL, NULL, NULL, NULL);
}
function fs_transfer($exten, $dialplan, $context){
- return fs_switch_ivr_sessn_transfer($sessn, $exten, $dialplan, $context);
+ return fs_switch_ivr_sessn_transfer($this->uuid, $exten, $dialplan, $context);
}
function fs_speak($ttsName, $voice, $text, $dtmf=NULL){
- return fs_switch_ivr_speak_text($sessn, $ttsName, NULL, NULL, $dtmf, $text, NULL, 0);
+ return fs_switch_ivr_speak_text($this->uuid, $ttsName, NULL, NULL, $dtmf, $text, NULL, 0);
}
Modified: freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/mod_php.c
==============================================================================
--- freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/mod_php.c (original)
+++ freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/mod_php.c Mon Sep 11 23:16:25 2006
@@ -25,11 +25,14 @@
*
* Anthony Minessale II <anthmct at yahoo.com>
* Brian Fertig <brian.fertig at convergencetek.com>
+ * Steph Fox <steph at zend.com>
*
+ *
* mod_php.c -- PHP Module
*
*/
+
#ifndef _REENTRANT
#define _REENTRANT
#endif
@@ -40,6 +43,14 @@
#include <sapi/embed/php_embed.h>
+#ifdef ZTS
+ zend_compiler_globals *compiler_globals;
+ zend_executor_globals *executor_globals;
+ php_core_globals *core_globals;
+ sapi_globals_struct *sapi_globals;
+#endif
+
+
#include <switch.h>
const char modname[] = "mod_php";
@@ -79,7 +90,7 @@
}
-/*void mod_php_error_handler(int type, const char *error_filename, const uint error_lineno, const char *format, va_list args)
+void mod_php_error_handler(int type, const char *error_filename, const uint error_lineno, const char *format, va_list args)
{
char *buffer;
int buffer_len;
@@ -161,7 +172,7 @@
zend_hash_update(EG(active_symbol_table), "php_errormsg", sizeof("php_errormsg"), (void **) & tmp, sizeof(pval *), NULL);
}
efree(buffer);
-}*/
+}
static void mod_php_log_message(char *message)
@@ -169,7 +180,7 @@
switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_NOTICE, "%s\n", message);
}
-//typedef void (*sapi_error_function_t)(int type, const char *error_msg, ...);
+typedef void (*sapi_error_function_t)(int type, const char *error_msg, ...);
@@ -188,8 +199,10 @@
argc = switch_separate_string(mydata, ' ',argv,(sizeof(argv) / sizeof(argv[0])));
- sprintf(php_code, "$uuid=\"%s\"; include(\"%s\");\n", argv[0], argv[1]);
+ sprintf(php_code, "uuid=\"%s\"; include(\"%s\");\n", argv[0], argv[1]);
//sprintf(php_code, "include('%s');", argv[1]);
+
+ sprintf(php_code, "%s %s", data, uuid);
zend_file_handle script;
script.type = ZEND_HANDLE_FP;
@@ -198,31 +211,43 @@
script.free_filename = 0;
script.handle.fp = fopen(script.filename, "rb");
- //if (php_embed_init(argc, argv, &tsrm_ls) == FAILURE) {
+ // Initialize PHPs CORE
php_embed_init(argc, argv, &tsrm_ls);
- //if (php_request_startup(TSRMLS_C) == FAILURE) {
- // return;
- //}
+
+ // Return All of the DEBUG crap to the console and/or a log file
php_embed_module.ub_write = sapi_mod_php_ub_write;
php_embed_module.log_message = mod_php_log_message;
- //php_embed_module.sapi_error = (sapi_error_function_t)mod_php_error_handler;
+ php_embed_module.sapi_error = (sapi_error_function_t)mod_php_error_handler;
+ // Let the nice people know we are about to start their script
switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_NOTICE, "Starting Script %s\n",data);
- retval = php_execute_script(&script TSRMLS_CC);
+ // Force $uuid and $session to exist in PHPs memory space
+ zval *php_uuid;
+ MAKE_STD_ZVAL(php_uuid);
+ //MAKE_STD_ZVAL(php_session);
+ //php_uuid->type = IS_STRING;
+ //php_uuid->value.str.len = strlen(uuid);
+ //php_uuid->value.str.val = estrdup(uuid);
+ ZVAL_STRING(php_uuid, uuid , 1);
+ //ZVAL_STRING(php_session, session , 1);
+ ZEND_SET_SYMBOL(&EG(symbol_table), "uuid", php_uuid);
+ //ZEND_SET_SYMBOL(&EG(active_symbol_table), "session", php_session);
-/* php_embed_init(argc, argv, &tsrm_ls);
+ // Force Some INI entries weather the user likes it or not
+ //zend_alter_ini_entry("register_globals", strlen("register_globals")+1, "1", 1, PHP_INI_SYSTEM, PHP_INI_STAGE_RUNTIME);
- //PHP_EMBED_START_BLOCK(argc, argv);*/
- //retval = zend_eval_string(php_code, NULL, "Embedded code" TSRMLS_CC);
-/* //PHP_EMBED_END_BLOCK(); */
+ // Execute the bloody script
+ retval = php_execute_script(&script TSRMLS_CC);
+
+ // Clean up after PHP and such
php_embed_shutdown(tsrm_ls);
-// php_request_shutdown(NULL);
- return;
-
+ // Return back to the Dialplan
+
+// Buh bye now!
}
static const switch_application_interface_t php_application_interface = {
@@ -245,28 +270,40 @@
SWITCH_MOD_DECLARE(switch_status_t) switch_module_load(const switch_loadable_module_interface_t **module_interface, char *filename)
{
+void*** tsrm_ls = NULL;
+
/* connect my internal structure to the blank pointer passed to me */
*module_interface = &php_module_interface;
//switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_NOTICE, "Hello World!\n");
+#ifdef ZTS
+ tsrm_startup(1, 1, 0, NULL);
+ compiler_globals = ts_resource(compiler_globals_id);
+ executor_globals = ts_resource(executor_globals_id);
+ core_globals = ts_resource(core_globals_id);
+ sapi_globals = ts_resource(sapi_globals_id);
+ tsrm_ls = ts_resource(0);
+#endif
+
/* indicate that the module should continue to be loaded */
return SWITCH_STATUS_SUCCESS;
}
/*
- Called when the system shuts down
+ //Called when the system shuts down
SWITCH_MOD_DECLARE(switch_status) switch_module_shutdown(void)
{
return SWITCH_STATUS_SUCCESS;
}
-*/
-/*
- If it exists, this is called in it's own thread when the module-load completes
+
+
+ //If it exists, this is called in it's own thread when the module-load completes
SWITCH_MOD_DECLARE(switch_status) switch_module_shutdown(void)
{
return SWITCH_STATUS_SUCCESS;
}
-*/
+
+*/
Added: freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/php.ini
==============================================================================
--- (empty file)
+++ freeswitch/branches/docelmo/trunk/src/mod/languages/mod_php/php.ini Mon Sep 11 23:16:25 2006
@@ -0,0 +1,1261 @@
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; This file controls many aspects of PHP's behavior. In order for PHP to
+; read it, it must be named 'php.ini'. PHP looks for it in the current
+; working directory, in the path designated by the environment variable
+; PHPRC, and in the path that was defined in compile time (in that order).
+; Under Windows, the compile-time path is the Windows directory. The
+; path in which the php.ini file is looked for can be overridden using
+; the -c argument in command line mode.
+;
+; The syntax of the file is extremely simple. Whitespace and Lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+;
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+;
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
+;
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+;
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+;
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+;
+; foo = ; sets foo to an empty string
+; foo = none ; sets foo to an empty string
+; foo = "none" ; sets foo to the string 'none'
+;
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+;
+;
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; This is the recommended, PHP 5-style version of the php.ini-dist file. It
+; sets some non standard settings, that make PHP more efficient, more secure,
+; and encourage cleaner coding.
+;
+; The price is that with these settings, PHP may be incompatible with some
+; applications, and sometimes, more difficult to develop with. Using this
+; file is warmly recommended for production sites. As all of the changes from
+; the standard settings are thoroughly documented, you can go over each one,
+; and decide whether you want to use it or not.
+;
+; For general information about the php.ini file, please consult the php.ini-dist
+; file, included in your PHP distribution.
+;
+; This file is different from the php.ini-dist file in the fact that it features
+; different values for several directives, in order to improve performance, while
+; possibly breaking compatibility with the standard out-of-the-box behavior of
+; PHP. Please make sure you read what's different, and modify your scripts
+; accordingly, if you decide to use this file instead.
+;
+; - register_globals = Off [Security, Performance]
+; Global variables are no longer registered for input data (POST, GET, cookies,
+; environment and other server variables). Instead of using $foo, you must use
+; you can use $_REQUEST["foo"] (includes any variable that arrives through the
+; request, namely, POST, GET and cookie variables), or use one of the specific
+; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending
+; on where the input originates. Also, you can look at the
+; import_request_variables() function.
+; Note that register_globals is going to be depracated (i.e., turned off by
+; default) in the next version of PHP, because it often leads to security bugs.
+; Read http://php.net/manual/en/security.registerglobals.php for further
+; information.
+; - register_long_arrays = Off [Performance]
+; Disables registration of the older (and deprecated) long predefined array
+; variables ($HTTP_*_VARS). Instead, use the superglobals that were
+; introduced in PHP 4.1.0
+; - display_errors = Off [Security]
+; With this directive set to off, errors that occur during the execution of
+; scripts will no longer be displayed as a part of the script output, and thus,
+; will no longer be exposed to remote users. With some errors, the error message
+; content may expose information about your script, web server, or database
+; server that may be exploitable for hacking. Production sites should have this
+; directive set to off.
+; - log_errors = On [Security]
+; This directive complements the above one. Any errors that occur during the
+; execution of your script will be logged (typically, to your server's error log,
+; but can be configured in several ways). Along with setting display_errors to off,
+; this setup gives you the ability to fully understand what may have gone wrong,
+; without exposing any sensitive information to remote users.
+; - output_buffering = 4096 [Performance]
+; Set a 4KB output buffer. Enabling output buffering typically results in less
+; writes, and sometimes less packets sent on the wire, which can often lead to
+; better performance. The gain this directive actually yields greatly depends
+; on which Web server you're working with, and what kind of scripts you're using.
+; - register_argc_argv = Off [Performance]
+; Disables registration of the somewhat redundant $argv and $argc global
+; variables.
+; - magic_quotes_gpc = Off [Performance]
+; Input data is no longer escaped with slashes so that it can be sent into
+; SQL databases without further manipulation. Instead, you should use the
+; function addslashes() on each input element you wish to send to a database.
+; - variables_order = "GPCS" [Performance]
+; The environment variables are not hashed into the $_ENV. To access
+; environment variables, you can use getenv() instead.
+; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
+; By default, PHP surpresses errors of type E_NOTICE. These error messages
+; are emitted for non-critical errors, but that could be a symptom of a bigger
+; problem. Most notably, this will cause error messages about the use
+; of uninitialized variables to be displayed.
+; - allow_call_time_pass_reference = Off [Code cleanliness]
+; It's not possible to decide to force a variable to be passed by reference
+; when calling a function. The PHP 4 style to do this is by making the
+; function require the relevant argument by reference.
+
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+engine = On
+
+; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
+zend.ze1_compatibility_mode = Off
+
+; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
+; NOTE: Using short tags should be avoided when developing applications or
+; libraries that are meant for redistribution, or deployment on PHP
+; servers which are not under your control, because short tags may not
+; be supported on the target server. For portable, redistributable code,
+; be sure not to use short tags.
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+precision = 14
+
+; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
+y2k_compliance = On
+
+; Output buffering allows you to send header lines (including cookies) even
+; after you send body content, at the price of slowing PHP's output layer a
+; bit. You can enable output buffering during runtime by calling the output
+; buffering functions. You can also enable output buffering for all files by
+; setting this directive to On. If you wish to limit the size of the buffer
+; to a certain size - you can use a maximum number of bytes instead of 'On', as
+; a value for this directive (e.g., output_buffering=4096).
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+zlib.output_compression = Off
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated.
+; A warning appears if the specified function is not defined, or if the
+; function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func=
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 100
+
+; Whether to enable the ability to force arguments to be passed by reference
+; at function call time. This method is deprecated and is likely to be
+; unsupported in future versions of PHP/Zend. The encouraged method of
+; specifying which arguments should be passed by reference is in the function
+; declaration. You're encouraged to try and turn this option Off and make
+; sure your scripts work properly with it in order to ensure they will work
+; with future versions of the language (you will receive a warning each time
+; you use this feature, and the argument will be passed by value instead of by
+; reference).
+allow_call_time_pass_reference = Off
+
+;
+; Safe Mode
+;
+safe_mode = Off
+
+; By default, Safe Mode does a UID compare check when
+; opening files. If you want to relax this to a GID compare,
+; then turn on safe_mode_gid.
+safe_mode_gid = Off
+
+; When safe_mode is on, UID/GID checks are bypassed when
+; including files from this directory and its subdirectories.
+; (directory must also be in include_path or full path must
+; be used when including)
+safe_mode_include_dir =
+
+; When safe_mode is on, only executables located in the safe_mode_exec_dir
+; will be allowed to be executed via the exec family of functions.
+safe_mode_exec_dir =
+
+; Setting certain environment variables may be a potential security breach.
+; This directive contains a comma-delimited list of prefixes. In Safe Mode,
+; the user may only alter environment variables whose names begin with the
+; prefixes supplied here. By default, users will only be able to set
+; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
+;
+; Note: If this directive is empty, PHP will let the user modify ANY
+; environment variable!
+safe_mode_allowed_env_vars = PHP_
+
+; This directive contains a comma-delimited list of environment variables that
+; the end user won't be able to change using putenv(). These variables will be
+; protected even if safe_mode_allowed_env_vars is set to allow to change them.
+safe_mode_protected_env_vars = LD_LIBRARY_PATH
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.bg = #FFFFFF
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long request, which may end up
+; being interrupted by the user or a browser timing out.
+; ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; realpath_cache_size=16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; realpath_cache_ttl=120
+
+;
+; Misc
+;
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+expose_php = On
+
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+max_execution_time = 1000 ; Maximum execution time of each script, in seconds
+max_input_time = 1000 ; Maximum amount of time each script may spend parsing request data
+memory_limit = 8M ; Maximum amount of memory a script may consume (8MB)
+
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; error_reporting is a bit-field. Or each number up to get desired error
+; reporting level
+; E_ALL - All errors and warnings (doesn't include E_STRICT)
+; E_ERROR - fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it's automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+;
+; Examples:
+;
+; - Show all errors, except for notices and coding standards warnings
+;
+;error_reporting = E_ALL & ~E_NOTICE
+;
+; - Show all errors, except for notices
+;
+;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
+;
+; - Show only errors
+;
+;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
+;
+; - Show all errors, except coding standards warnings
+;
+error_reporting = E_ALL
+
+; Print out errors (as a part of the output). For production web sites,
+; you're strongly encouraged to turn this feature off, and use error logging
+; instead (see below). Keeping display_errors enabled on a production web site
+; may reveal security information to end users, such as file paths on your Web
+; server, your database schema or other information.
+display_errors = Off
+
+; Even when display_errors is on, errors that occur during PHP's startup
+; sequence are not displayed. It's strongly recommended to keep
+; display_startup_errors off, except for when debugging.
+display_startup_errors = Off
+
+; Log errors into a log file (server-specific log, stderr, or error_log (below))
+; As stated above, you're strongly advised to use error logging in place of
+; error displaying on production web sites.
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line until ignore_repeated_source is set true.
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; sourcelines.
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+report_memleaks = On
+
+; Store the last error/warning message in $php_errormsg (boolean).
+track_errors = Off
+
+; Disable the inclusion of HTML tags in error messages.
+; Note: Never use this feature for production boxes.
+html_errors = Off
+
+; If html_errors is set On PHP produces clickable error messages that direct
+; to a page describing the error or function causing the error in detail.
+; You can download a copy of the PHP manual from http://www.php.net/docs.php
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot.
+; Note: Never use this feature for production boxes.
+;docref_root = "/phpmanual/"
+;docref_ext = .html
+
+; String to output before an error message.
+;error_prepend_string = "<font color=ff0000>"
+
+; String to output after an error message.
+;error_append_string = "</font>"
+
+; Log errors to specified file.
+;error_log = filename
+
+; Log errors to syslog (Event Log on NT, not valid in Windows 95).
+;error_log = syslog
+
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+;
+; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
+
+; The separator used in PHP generated URLs to separate arguments.
+; Default is "&".
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; Default is "&".
+; NOTE: Every character in this directive is considered as separator!
+;arg_separator.input = ";&"
+
+; This directive describes the order in which PHP registers GET, POST, Cookie,
+; Environment and Built-in variables (G, P, C, E & S respectively, often
+; referred to as EGPCS or GPC). Registration is done from left to right, newer
+; values override older values.
+variables_order = "GPCS"
+
+; Whether or not to register the EGPCS variables as global variables. You may
+; want to turn this off if you don't want to clutter your scripts' global scope
+; with user data. This makes most sense when coupled with track_vars - in which
+; case you can access all of the GPC variables through the $HTTP_*_VARS[],
+; variables.
+;
+; You should do your best to write your scripts so that they do not require
+; register_globals to be on; Using form variables as globals can easily lead
+; to possible security problems, if the code is not very well thought of.
+register_globals = On
+
+; Whether or not to register the old-style input arrays, HTTP_GET_VARS
+; and friends. If you're not using them, it's recommended to turn them off,
+; for performance reasons.
+register_long_arrays = Off
+
+; This directive tells PHP whether to declare the argv&argc variables (that
+; would contain the GET information). If you don't use these variables, you
+; should turn it off for increased performance.
+register_argc_argv = Off
+
+; When enabled, the SERVER and ENV variables are created when they're first
+; used (Just In Time) instead of when the script starts. If these variables
+; are not used within a script, having this directive on will result in a
+; performance gain. The PHP directives register_globals, register_long_arrays,
+; and register_argc_argv must be disabled for this directive to have any affect.
+auto_globals_jit = On
+
+; Maximum size of POST data that PHP will accept.
+post_max_size = 8M
+
+; Magic quotes
+;
+
+; Magic quotes for incoming GET/POST/Cookie data.
+magic_quotes_gpc = Off
+
+; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
+magic_quotes_runtime = Off
+
+; Use Sybase-style magic quotes (escape ' with '' instead of \').
+magic_quotes_sybase = Off
+
+; Automatically add files before or after any PHP document.
+auto_prepend_file =
+auto_append_file =
+
+; As of 4.0b4, PHP always outputs a character encoding by default in
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+default_mimetype = "text/html"
+;default_charset = "iso-8859-1"
+
+; Always populate the $HTTP_RAW_POST_DATA variable.
+;always_populate_raw_post_data = On
+
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+;include_path = ".:/php/includes"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+extension_dir = "../lib/php/extensions/"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request.
+; cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; cgi.redirect_status_env = ;
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; fastcgi.impersonate = 1;
+
+; Disable logging through FastCGI connection
+; fastcgi.log = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
+; is supported by Apache. When this option is set to 1 PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+;cgi.rfc2616_headers = 0
+
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+upload_max_filesize = 2M
+
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+allow_url_fopen = On
+
+; Define the anonymous ftp password (your email address)
+;from="john at doe.com"
+
+; Define the User-Agent string
+; user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; auto_detect_line_endings = Off
+
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+;
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; Note that it should be the name of the module only; no directory information
+; needs to go here. Specify the location of the extension with the
+; extension_dir directive above.
+
+
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+
+;extension=php_mbstring.dll
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_dba.dll
+;extension=php_dbase.dll
+;extension=php_exif.dll
+;extension=php_fdf.dll
+;extension=php_filepro.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_ifx.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+;extension=php_mcrypt.dll
+;extension=php_mhash.dll
+;extension=php_mime_magic.dll
+;extension=php_ming.dll
+;extension=php_mssql.dll
+;extension=php_msql.dll
+;extension=php_mysql.dll
+;extension=php_oci8.dll
+;extension=php_openssl.dll
+;extension=php_oracle.dll
+;extension=php_pgsql.dll
+;extension=php_shmop.dll
+;extension=php_snmp.dll
+;extension=php_sockets.dll
+;extension=php_sqlite.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+extension=php_freeswitch.so
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[Date]
+; Defines the default timezone used by the date functions
+;date.timezone =
+
+[Syslog]
+; Whether or not to define the various syslog variables (e.g. $LOG_PID,
+; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
+; runtime, you can define these variables by calling define_syslog_variables().
+define_syslog_variables = Off
+
+[mail function]
+; For Win32 only.
+SMTP = localhost
+smtp_port = 25
+
+; For Win32 only.
+;sendmail_from = me at example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail(), even in safe mode.
+;mail.force_extra_parameters =
+
+[SQL]
+sql.safe_mode = Off
+
+[ODBC]
+;odbc.default_db = Not yet implemented
+;odbc.default_user = Not yet implemented
+;odbc.default_pw = Not yet implemented
+
+; Allow or prevent persistent links.
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of uodbc.defaultlrl and uodbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+[MySQL]
+; Allow or prevent persistent links.
+mysql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+mysql.default_password =
+
+; Maximum time (in secondes) for connect timeout. -1 means no limit
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of links. -1 means no limit.
+mysqli.max_links = -1
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mSQL]
+; Allow or prevent persistent links.
+msql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+msql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+msql.max_links = -1
+
+[PostgresSQL]
+; Allow or prevent persistent links.
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Noitce message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+pgsql.log_notice = 0
+
+[Sybase]
+; Allow or prevent persistent links.
+sybase.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+sybase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+sybase.max_links = -1
+
+;sybase.interface_file = "/usr/sybase/interfaces"
+
+; Minimum error severity to display.
+sybase.min_error_severity = 10
+
+; Minimum message severity to display.
+sybase.min_message_severity = 10
+
+; Compatability mode with old versions of PHP 3.0.
+; If on, this will cause PHP to automatically assign types to results according
+; to their Sybase type, instead of treating them all as strings. This
+; compatability mode will probably not stay around forever, so try applying
+; whatever necessary changes to your code, and turn it off.
+sybase.compatability_mode = Off
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+sybct.min_client_severity = 10
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+bcmath.scale = 0
+
+[browscap]
+;browscap = extra/browscap.ini
+
+[Informix]
+; Default host for ifx_connect() (doesn't apply in safe mode).
+ifx.default_host =
+
+; Default user for ifx_connect() (doesn't apply in safe mode).
+ifx.default_user =
+
+; Default password for ifx_connect() (doesn't apply in safe mode).
+ifx.default_password =
+
+; Allow or prevent persistent links.
+ifx.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+ifx.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ifx.max_links = -1
+
+; If on, select statements return the contents of a text blob instead of its id.
+ifx.textasvarchar = 0
+
+; If on, select statements return the contents of a byte blob instead of its id.
+ifx.byteasvarchar = 0
+
+; Trailing blanks are stripped from fixed-length char columns. May help the
+; life of Informix SE users.
+ifx.charasvarchar = 0
+
+; If on, the contents of text and byte blobs are dumped to a file instead of
+; keeping them in memory.
+ifx.blobinfile = 0
+
+; NULL's are returned as empty strings, unless this is set to 1. In that case,
+; NULL's are returned as string 'NULL'.
+ifx.nullformat = 0
+
+[Session]
+; Handler used to store/retrieve data.
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; As of PHP 4.0.1, you can define the path as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if you
+; or your OS have problems with lots of files in one directory, and is
+; a more efficient layout for servers that handle lots of sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+;session.save_path = "/tmp"
+
+; Whether to use cookies.
+session.use_cookies = 1
+
+; This option enables administrators to make their users invulnerable to
+; attacks which involve passing session ids in URLs; defaults to 0.
+; session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+session.cookie_domain =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+session.serialize_handler = php
+
+; Define the probability that the 'garbage collection' process is started
+; on every session initialization.
+; The probability is calculated by using gc_probability/gc_divisor,
+; e.g. 1/100 means there is a 1% chance that the GC process starts
+; on each request.
+
+session.gc_probability = 1
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; cd /path/to/sessions; find -cmin +24 | xargs rm
+
+; PHP 4.2 and less have an undocumented feature/bug that allows you to
+; to initialize a session variable in the global scope, albeit register_globals
+; is disabled. PHP 4.3 and later will warn you, if this feature is used.
+; You can disable the feature and the warning separately. At this time,
+; the warning is only displayed, if bug_compat_42 is enabled.
+
+session.bug_compat_42 = 0
+session.bug_compat_warn = 1
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+session.referer_check =
+
+; How many bytes to read from the file.
+session.entropy_length = 0
+
+; Specified here to create the session id.
+session.entropy_file =
+
+;session.entropy_length = 16
+
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publically accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+session.use_trans_sid = 0
+
+; Select a hash function
+; 0: MD5 (128 bits)
+; 1: SHA-1 (160 bits)
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+;
+; 4 bits: 0-9, a-f
+; 5 bits: 0-9, a-v
+; 6 bits: 0-9, a-z, A-Z, "-", ","
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatability mode with old versions of PHP 3.0.
+mssql.compatability_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.comf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+;assert.warning = On
+
+; Don't bail out by default.
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+;assert.quiet_eval = 0
+
+[Verisign Payflow Pro]
+; Default Payflow Pro server.
+pfpro.defaulthost = "test-payflow.verisign.com"
+
+; Default port to connect to.
+pfpro.defaultport = 443
+
+; Default timeout in seconds.
+pfpro.defaulttimeout = 30
+
+; Default proxy IP address (if required).
+;pfpro.proxyaddress =
+
+; Default proxy port.
+;pfpro.proxyport =
+
+; Default proxy logon.
+;pfpro.proxylogon =
+
+; Default proxy password.
+;pfpro.proxypassword =
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+;com.typelib_file =
+; allow Distributed-COM calls
+;com.allow_dcom = true
+; autoregister constants of a components typlib on com_load()
+;com.autoregister_typelib = true
+; register constants casesensitive
+;com.autoregister_casesensitive = false
+; show warnings on duplicate constat registrations
+;com.autoregister_verbose = true
+
+[mbstring]
+; language for internal character representation.
+;mbstring.language = Japanese
+
+; internal/script encoding.
+; Some encoding cannot work as internal encoding.
+; (e.g. SJIS, BIG5, ISO-2022-*)
+;mbstring.internal_encoding = EUC-JP
+
+; http input encoding.
+;mbstring.http_input = auto
+
+; http output encoding. mb_output_handler must be
+; registered as output buffer to function
+;mbstring.http_output = SJIS
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; auto means
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+;mbstring.substitute_character = none;
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+;mbstring.strict_encoding = Off
+
+[FrontBase]
+;fbsql.allow_persistent = On
+;fbsql.autocommit = On
+;fbsql.show_timestamp_decimals = Off
+;fbsql.default_database =
+;fbsql.default_database_password =
+;fbsql.default_host =
+;fbsql.default_password =
+;fbsql.default_user = "_SYSTEM"
+;fbsql.generate_warnings = Off
+;fbsql.max_connections = 128
+;fbsql.max_links = 128
+;fbsql.max_persistent = -1
+;fbsql.max_results = 128
+;fbsql.batchSize = 1000
+
+[gd]
+; Tell the jpeg decode to libjpeg warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+;exif.encode_unicode = ISO-8859-15
+;exif.decode_unicode_motorola = UCS-2BE
+;exif.decode_unicode_intel = UCS-2LE
+;exif.encode_jis =
+;exif.decode_jis_motorola = JIS
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+soap.wsdl_cache_enabled=1
+; Sets the directory name where SOAP extension will put cache files.
+soap.wsdl_cache_dir="/tmp"
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+soap.wsdl_cache_ttl=86400
+
+; Local Variables:
+; tab-width: 4
+; End:
More information about the Freeswitch-branches
mailing list